Ink tank replacement

Paper feed roller cleaning
To clean the paper feed rollers. To correct CD / DVD print position. To clean the platen ribs.

Printer buttons

CD / DVD print At CD / DVD printing, when position necessary adjustment Bottom plate cleaning When the back side of the paper is smeared
Computer (application software)
- Plain paper 1 min. - Computer (settings via the printer driver) - Plain paper 1 min. - Printer buttons [See Part 2, 4. FAQ, How to make and set the ASF subroller cleaning sheet, for details]
ASF sub- roller When the paper fed from the To clean the ASF subASF is smeared due to ink cleaning rollers. mist attached to the ASF subrollers.

1-3. Product Life

(1) Printer Specified print volume (I) or the years of use (II), whichever comes first. (I) Print volume : 18,000 pages Black 1,500 character pattern 8,300 pages
A4, 7.5% duty per color pattern A4, photo, borderless printing 4 x 6, photo, borderless printing Postcard, photo, borderless printing
5,400 pages 400 pages 3,200 pages 700 pages
(II) Years of use 5 years of use (2) Print head Print volume : 18,000 pages Black Color 1,500 character pattern A4, 7.5% duty per color pattern A4, photo, borderless printing 4 x 6, photo, borderless printing Postcard, photo, borderless printing (3) Ink tank (target value) 8,300 pages 5,400 pages 400 pages 3,200 pages 700 pages

Pattern Black text

Ink tank used PGI-5BK PGI-5BK CLI-8Y
Print yield Approx. 800 pages Approx. 1,250 pages Approx. 480 pages Approx. 500 pages Approx. 710 pages Approx. 1,100 pages Approx. 280 pages Approx. 250 pages Approx. 390 pages
Color chart CLI-8M CLI-8C CLI-8BK CLI-8Y Photo chart CLI-8M CLI-8C
Black text: When printing the Canon standard pattern (1,500 characters per page) on A4 size plain paper, with the default settings in the Windows XP driver, using Word 2003. Color chart: When printing the ISO/JIS-SCID N5 pattern on A4 size plain paper in bordered printing, with the default settings in the Windows XP driver, using Photoshop 7.0. Photo chart: When printing the Canon standard pattern on 4" x 6" Photo Paper Plus Glossy in borderless printing, with the default settings in the Windows XP driver, using Windows XP Photo Printing Wizard. The print yield in the table above is an average value measured in continuous printing, using the ink tank
immediately after it is unsealed, until the ink is out. Ink yield may vary depending on texts and photos printed, application software, print mode, and type of paper used.

1-4. Special Tools

Inner cover open during printing on paper. [1846]*2
Inner cover open (print continuable). [1851]*1 Inner cover open during printing on paper (print NOT continuable). [1856]*1
Inner cover closed during CD / DVD printing (print continuable). [1850]*1 Inner cover closed during CD / DVD printing (print NOT continuable). [1855]*1

7 times

Multiple ink tanks of the same color installed. [1681]
Ink tank in a wrong position. [1680] 8 times Warning: The waste ink absorber becomes almost full. [1700]
Install the ink tank(s) in the correct position. Pressing the Resume/Cancel button will The service call exit the error, and enable printing. error, indicating the waste ink absorber is full, is likely to occur soon. Remove the cable between the camera and the printer.

9 times

The connected digital camera or digital video camera does not support Camera Direct Printing. [2001]
10 times Automatic duplex printing cannot be performed. [1310]
The size of paper may not be compatible with automatic duplex printing. Press the Resume/Cancel
Data which was to be printed on the back side of
button to eject the paper being used at error occurrence. Printing will resume from on the front side of the next page. 11 times Failed in automatic print head alignment. [2500] Press the Resume/Cancel button. - If paper is being fed at error occurrence, the error is indicated after the paper is ejected. - If the error occurs, the print head alignment values are not changed. - After exit from the error by the Resume/Cancel button, the automatic print head alignment will not be redone.
paper at error occurrence is skipped (not printed). The error is indicated when the pattern is not printed due to no ink or nonejection of ink, or when the sensor's AD value is incorrect.
13 times The remaining ink amount unknown. [1683]
An ink tank which has once been empty Printing with a is installed. Replace the applicable ink once-empty or tank with a new one. refilled ink tank can damage the print head. If printing is continued without replacing the "nogood" ink tank, press the Resume/Cancel button for 5 sec. or longer to record the use of a refilled ink tank. Note: After the above operation, the function to detect the remaining ink amount is disabled.

14 times Ink tank not recognized. [1684] A non-supported ink tank is installed (the ink tank LED is turned off). Install the supported ink tanks. 15 times Ink tank not recognized. [1410 to 1419] No blinking Access cover open. [1200] An error occurred in an ink tank (the ink tank LED is turned off). Replace the ink tank(s). Close the access cover.
*1: Only for models supporting CD / DVD printing *2: Only for models not supporting CD / DVD printing
2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (Power LED), or Alarm LED Lit in Orange)
Cycles of blinking in orange (Alarm LED) and green (Power

Error [Error code]

Solution (Replacement of listed parts, which are likely to be faulty)
LED) 2 times Carriage error [5100] - Carriage unit (QM2-2251) - Timing slit strip film (QC1-6526) - Logic board ass'y (QM2-2733)*1 - Carriage motor (QK1-1500) - Timing sensor unit (QM2-2683) - Timing slit disk film (QC1-6229) - Feed roller ass'y (QL2-0950) - Platen unit (QM2-2248) - Logic board ass'y (QM2-2733)*1 - PAPER FEED MOTOR (QK1-1502) - Purge unit (QM2-2252) - Logic board ass'y (QM2-2733)*1 - Sheet feed unit (QM2-2278) - Logic board ass'y (QM2-2733)*1 - Ink absorber kit (QY5-0152)

Line feed error [6000]

Purge cam sensor error [5C00] ASF (cam) sensor error [5700] Internal temperature error [5400] Waste ink absorber full [5B00]
5 times 6 times 7 times 8 times
Print head temperature rise - Print head (QY6-0059) error [5200] - Logic board ass'y (QM2-2733)*1 EEPROM error [6800] Carriage lift mechanism error [5110] - Logic board ass'y (QM2-2733)*1 - PR lift shaft ass'y (QL2-0936) - Sheet feed unit (QM2-2278) - Logic board ass'y (QM2-2733)*1 - Carriage lift sensor unit (QM2-2678) - Sheet feed unit (QM2-2278) - Logic board ass'y (QM2-2733)*1 - Purge unit (QM2-2252) - Sheet feed unit (QM2-2278) - Logic board ass'y (QM2-2733)*1 - Sheet feed unit (QM2-2278) - Logic board ass'y (QM2-2733)*1 - Logic board ass'y (QM2-2733)*1 - Logic board ass'y (QM2-2733)*1 - Purge unit (QM2-2252) - Logic board ass'y (QM2-2733)*1 - Platen unit (QM2-2248) - Logic board ass'y (QM2-2733)*1 - Logic board ass'y (QM2-2733)*1

9 times 11 times

12 times

AP position error [6A00]

13 times
Paper feed position error [6B00]

14 times

Paper feed cam sensor error [6B10] USB Host Vbus over current [9000] Valve sensor error [6C00]

15 times 16 times

17 times 19 times
Motor driver error [6D00] Ink tank position sensor error [6502] Other hardware error

Printing is incorrect. No ejection of black ink.
Replace the logic board ass'y*1. Replace the - ink tank, or - print head*2, or remove foreign material from the purge unit caps, if any, or replace the purge unit.
Graphic or text is enlarged on printouts.
When enlarged in the carriage movement direction, clean grease or oil off the timing slit strip film, or replace the - timing slit strip film, - carriage unit, or - logic board ass'y*1. When enlarged in the paper feed direction, clean grease or oil off the timing slit disk film, or replace the
- timing slit disk film, - timing sensor unit, or - logic board ass'y*1.
Uneven printing due to line feeding Perform LF correction adjustment.
*1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or more, also replace the ink absorber kit (QY5-0152) when replacing the logic board ass'y. [See Section 3-3. Adjustment / Settings, (5) Service mode, for details.] *2: Replace the print head only after the print head deep cleaning is performed 2 times, and when the problem persists. To the top <Part 1: 2. LIST OF ERROR DISPLAY / INDICATION>

3. REPAIR

3-1. Notes on Service Part Replacement (and Disassembling / Reassembling)
Service part Logic board ass'y QM2-2733 Notes on replacement*1 - Before removal of the logic board ass'y, remove the power cord, and allow for approx. 1 minute (for discharge of capacitor's accumulated charges), to prevent damages to the logic board ass'y. - Before replacement, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or more, also replace the ink absorber kit when replacing the logic board ass'y. [See 3-3. Adjustment / Settings, (5) Service mode, for details.] Adjustment / settings After replacement: 1. Initialize the EEPROM. 2. Reset the waste ink counter. 3. Set the destination in the EEPROM. 4. Correct the CD / DVD and automatic print head alignment sensors. 5. Check the ink system function. [See 3-3. Adjustment / Settings, (5) Service mode, for details of 1 to 5] 6. Perform the print head alignment in the user mode. Operation check - EEPROM information print - Service test print - Printing via USB connection - Direct printing from a digital camera
Ink absorber kit QY5-0152
After replacement: 1. Reset the waste ink counter. [See 3.3. Adjustment / Settings, (5) Service mode.] At replacement: 1. Apply grease to the sliding portions. [See 3-3. Adjustment / Settings, (2) Grease application.] After replacement: 1. Correct the CD / DVD and automatic print head alignment sensors. [See 3.3. Adjustment / Settings, (5) Service mode.] 2. Check the ink system function. [See 3.3. Adjustment / Settings, (5) Service mode.] 3. Perform the print head alignment in the user mode.

- Service test print - EEPROM information print

Carriage unit QM2-2251

- Service test print (Confirm CD / DVD and automatic print head alignment sensor correction, and ink system function.)
Paper feed motor QK1-1502
- The red screws securing At replacement: the paper feed motor are 1. Adjust the paper feed allowed to be loosened. motor. (DO NOT loosen any

other red screws.)

[See 3-3. Adjustment / Settings, (1) Paper feed motor adjustment.] After the printer unit is assembled in the bottom case unit, the tube conditions are not visible. For confirmation of the tube conditions, perform the manual purging 3 or 4 times, and confirm that no strange noise is heard.
Platen unit: QM22248 Purge unit: QM22252 Waste ink tube: QC1-6458 Waste ink tube holder: QC1-6460
- By attaching the tape at At replacement: the specified 2 locations, 1. To protect the waste secure the waste ink ink tube from being tube to the waste ink pinched when tube holder. reassembling the printer unit chassis into the bottom case unit, tape the tube (at 2 locations). [See 3-2. Special Notes on Repair Servicing, (3) Printer unit and bottom case unit assembly.] After replacement: 1. Check the ink system function. [See 3-3. Adjustment / Settings, (5) Service mode.] At replacement: 1. Apply grease to the sliding portions. [See 3.3. Adjustment / Settings, (2) Grease application.] - Upon contact with the film, wipe the film with ethanol. - Confirm no grease is on the film. (Wipe off any grease thoroughly with ethanol.) - Do not bend the film After replacement: 1. Perform the print head alignment in the user mode.

Platen unit QM2-2248

- Service test print
PR lift shaft ass'y QL2-0936 CL INPUT GEAR QC1-6213 Timing slit strip film QC1-6526
Timing slit disk film QC1-6229

Print head QY6-0061

After replacement: 1. Perform the print head alignment in the user mode.
*1: General notes: - Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly. [See 3-2. Special Notes on Repair Servicing, (2) Flexible cable and harness wiring, connection, for details.] - Protect the waste ink tube from being pinched when assembling the printer unit chassis into the bottom case unit. Since the tube conditions after assembly are not visible, perform the manual purging 3 or 4 times to confirm that no strange noise is heard. [See 3-2. Special Notes on Repair Servicing, (3) Printer unit and bottom case unit assembly, for details.]

To the top <Part 1: 3. REPAIR, 3-2>
3-3. Adjustment / Settings
(1) Paper feed motor adjustment Perform the following adjustments when the paper feed motor unit is replaced: 1) When attaching the motor, fasten the screws so that the belt is properly stretched (in the direction indicated by the blue arrow in the figure below). 2) After replacement, be sure to perform the service test print, and confirm that no strange noise or faulty print operation (due to dislocation of the belt or gear, or out-of-phase motor, etc.) occurs.
Note: The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit. DO NOT loosen them in other cases.
(2) Grease application 1) Printer unit

2) CL base / CL gear

3) PR shaft / LF roller bushing
To the top <Part 1: 3. REPAIR, 3-3 (1) to (2)>
(3) Waste ink counter setting When the logic board ass'y is replaced, reset the waste ink counter. In addition, according to the waste ink amount, replace the waste ink absorber (ink absorber kit). The standard amount for waste ink absorber replacement is given in the table below. Waste ink amount*1 Less than 7% 7% or more Ink absorber kit replacement Not required. Required.
*1: Check the waste ink amount by service test print or EEPROM information print. [See 3.3. Adjustment / Settings, (5) Service mode, for details.] (4) User mode Function Print head manual cleaning Procedures - Cleaning both black and color: See "Standalone printer operation" below. - Cleaning black or color separately, or both black and color: Perform from the printer driver Maintenance tab. Remarks
Print head deep cleaning - Cleaning black or color separately, or both black and color: Perform from the printer driver Maintenance tab. Paper feed roller cleaning Nozzle check pattern printing See "Standalone printer operation" below. - See "Standalone printer operation" below. - Perform from the printer driver Maintenance tab.
Print head alignment - See "Standalone printer operation" below. - Perform from the printer driver Maintenance tab. (Automatic head alignment, Manual head alignment) Bottom plate cleaning Perform from the printer driver Maintenance tab. The print head is replaceable at the same position as for ink tank replacement. (Open the access cover. When the carriage stops at the center, the print head can be replaced.) In Custom Settings of the printer driver Maintenance tab, manual print head alignment (by selecting the optimum values) as with the conventional models can be performed. Cleaning of the platen ribs when the back side of paper gets smeared.

(6) USB 2.0 Hi-Speed supported The printer supports USB 2.0 Hi-Speed, enabling high speed data transfer in use with the computer, OS, and USB hub.
To the top <Part 2: 1. NEW TECHNOLOGIES>
2. CLEANING MODE AND AMOUNT OF INK PURGED
To prevent printing problems due to bubbles, dust, or ink clogging, print head cleaning is performed before the start of printing (when the cleaning flag is on), except in the following cases: - Cleaning on arrival: Performed when the access cover is closed. - Manual cleaning / deep cleaning: Performed manually. <Cleaning mode list> Black: Pigment-based black Color: Dye-based black, cyan, magenta, yellow Amount of ink used (g) (in the normal temperature/humidity environment) 0.57 (Black) 2.25 (Color) Est. required time (sec.) (not including the time of opening the caps) 100

Condition

Details
On arrival of the printer (All in sequence)
First to third cleaning after shipped from the plant.
Dot count cleaning (Black)
When the specified number of dots are printed since the previous Black cleaning.

0.20 (Black)

35 (Black)
Timer cleaning 0*1 (Black only)
If 24 to 60 hours have elapsed since the previous Black cleaning till the start of the next printing.
Timer cleaning - 1 If 60 to 96 hours have elapsed since (Black only) the previous Black cleaning till the start of the next printing.
Timer cleaning - 2 If 96 to 120 hours have elapsed since (Black only) the previous Black cleaning till the start of the next printing.
Timer cleaning 3*2 (Black/Color) If 120 to 336 hours have elapsed since the previous Black/Color cleaning till the start of the next printing. 0.20 (Black) 0.66 (Color) 35 (Black) 40 (Color)
Timer cleaning - 4 If 336 to 504 hours have elapsed (All in sequence) since the previous Black/Color cleaning till the start of the next printing. Timer cleaning - 5 If 504 to 720 hours have elapsed (All in sequence) since the previous Black/Color cleaning till the start of the next printing.
0.57 (Black) 1.06 (Color)
Timer cleaning - 6 If 720 to 1,080 hours have elapsed (All in sequence) since the previous Black/Color cleaning till the start of the next printing. Timer cleaning - 7 If 1,080 to 2,160 hours have elapsed (All in sequence) since the previous Black/Color cleaning till the start of the next printing. Timer cleaning - 8 If 2,160 to 4,320 hours have elapsed (All in sequence) since the previous Black/Color cleaning till the start of the next printing. Timer cleaning - 9 If 4,320 to 8,640 hours have elapsed (All in sequence) since the previous Black/Color cleaning till the start of the next printing. Timer cleaning 10 (All in sequence) If 8,640 or longer hours have elapsed since the previous Black/Color cleaning till the start of the next printing. When the print head is removed and installed. 0.57 (Black) 2.25 (Color) 1.27 (Black) 1.06 (Color)

In the high - Reduce the - Multiple temperature and amount of sheets of high humidity paper set in the paper feed environment, ASF to half at the same paper becomes (approx. 5 mm time. wavy; in the low high). - Paper feeds temperature and at an angle. low humidity - A paper jam environment, occurs. paper curls significantly. When the - In the low temperature and maximum amount of paper low humidity is set in the ASF, environment and if the paper- With the return tab fits in a maximum wave or curl of amount of paper the paper, the tab set (13 mm) slips and does not catch paper properly, causing paper feed problems. Since coaxial - Align the paper tolerance guide to the between the paper edge pinch roller and tighter than the LF roller, usual. which determines the paper feed alignment, is 0.2mm, skewed paper feeding can occur. However, according to the field data of current models, the skewness level caused by the coaxial tolerance of 0.2mm is within the criteria of +/1%, thus the phenomenon is left as is. - Paper feeds at an angle. - A margin appears on printouts.
Skewed paper - Paper feeding feeding (at the from the ASF level of +/- 1%) - Credit Card size
Soiling on the - After continuous back side of borderless paper (lines or printing of small streaks parallel sized paper to the paper (such as 4 x 6), feed direction) when a larger sized paper (such as A4) is printed. - With Photo Paper Plus Double Sided or postcards, the phenomenon is likely to be noticeable and to be complained of by users, as printing is performed on both sides of such paper. Soiling on - Automatic duplex paper in printing (Photo automatic Paper Plus duplex printing Double Sided, (lines or postcards, plain streaks paper) perpendicular to the paper feed direction)
In borderless 1. Perform - Paper gets printing, printing Bottom plate smeared. is performed to cleaning (from - The back the size slightly the printer side of larger than the driver) up to 3 paper gets paper size, and times*1. smeared. ink off the paper 2. If soiling on is absorbed by the paper still the platen's ink remains after absorber. 3 times of Absorbed ink Bottom plate may attach to the cleaning, wipe platen rib(s) after the platen rib several dozen (s) and their sheets are surroundings printed, causing with a cotton soiling at the swab. leading edge of paper or on the back side of paper. On the rib(s) inside the sheet feed unit used for duplex printing, ink mist may accumulate, smearing paper. - Paper gets Temporary smeared. operational solution: - The back Cancel automatic side of duplex printing, paper gets and manually smeared. print each side of - Even after paper. Bottom plate cleaning Cleaning by was user: performed, and the 1. Perform platen ribs Bottom plate cleaning (from were cleaned with the printer driver) up to 3 cotton swab, paper gets times*1. smeared. 2. If soiling on the paper still remains after 3 times of Bottom plate cleaning, wipe the platen rib (s) and their surroundings with a cotton swab. If the phenomenon persists after conducting 1 and 2, servicing is required. Service: Wipe any soiling or dirt off from the sheet feed unit

Detection functions

Acoustic noise (Highest print quality)

Power supply

Power supply voltage, frequency AC 100 to 120V, 50/60Hz AC 220 to 240V, 50/60Hz
External dimensions Weight
Printer: With the paper support and output tray retracted: Approx. 444 (W) x 309 (D) x 160 (H )mm Approx. 17.7 (W) x 12.3 (D) x 6.4 (H) inches Approx. 7.3kg, not including print head and optional units Electromagnetic radiance: FCC, IC, CE Mark, Taiwan EMC, C-tick, CCC (Chinese EMC), Korea MIC, GostR Electrical safety: UL, C-UL, CB Report, CE Mark, GS, Gost-R, FT, SASO, CCC(Safety), SPRING, Korea EK, IRAM (Argentine Safety) Environmental regulations: RoHS (EU), WEEE (EU), Korea Package Recycle Law, Green Point (Germany), Energy Star
Related standards (Printer, Adapter)
Serial number location On the carriage flexible cable holder (visible on the right of the carriage after the printer is turned on, the access cover is opened, and the carriage moves to the
center.) Remaining ink amount Available (automatic detection by optical method and dot count, enabled at default) detection Paper type detection Print head alignment Not available Available (automatic or manual alignment via driver utilities, or the Resume/Cancel button in Camera Direct Printing, automatic alignment at default)
*1: Only for CD / DVD printing supported regions <Print head> Type Print head Ink color Ink tank Weight (Net) Supply method Part number Single head with 5 removable ink tanks (each color) Black: 512 nozzles (600dpi), 30pl (pigment-based black) Color: 512 nozzles x 6 (1,200dpi), 1pl / 5pl (cyan, magenta), 5pl (black, yellow) Pigment-based black, Dye-based black, cyan, magenta, yellow PGI-5BK (pigment-based), CLI-8BK/C/M/Y (dye-based) Print head, approx. 60g As a service part (not including ink tanks) QY6-0061-000
<Supported ink tanks> Model Destination Pigmentbased PIG-5BK PIXMA iP5200 Overseas models O BCI-9BK X CLI-8BK O BCI-7eBK X O BCI-7eC X Dye-based CLI-8C CLI-8M O BCI-7eM X CLI-8Y O BCI-7eY X

O: Usable X: Not usable

Note: The ink tanks BCI-9BK and BCI-7e series available in Japanese market are not compatible with the PIXMA iP5200 overseas models. Be sure to use the appropriate ink tanks in servicing.
To the top <PIXMA iP5200 Specifications>
PIXMA iP5200R REFERENCE MANUAL
This reference manual describes differences from the base model, PIXMA iP5200. When referring to the PIXMA iP5200 Service Manual, Service Parts Number in it may be different from PIXMA iP5200 model. Please refer to the PIXUS iP5200R/PIXMA iP5200R Parts Catalog (QY8-9083-D0C).

QY8-13AJ-000

TABLE OF CONTENTS

Page 5

Part 1:
MAINTENANCE 1.1 Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer LIST OF ERROR DISPLAY / LIST OF TROUBLESHOOTING 2.2 Service Call Errors (by LED Blinking in Orange and Green Alternately, or Lit in Orange) 2.4 Troubleshooting by Symptom REPAIR 3.1 Notes on Service Part Replacement 3.2 Special Notes on Repair Servicing 3.4 Verification Items (3) Network setting information (NIC EEPROM information) Print

Part 3:

BLOCK DIAGRAM PIXMA iP5200R SPECIFICATION

Part 1 1.

1.1 (1)
Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer Adjustment (added to iP 5200)
Adjustment Timing NIC BOARD replacement Purpose To confirm operations Tool None. Approx. time 1 min.
Network setting information print (NIC EEPROM information print)
LIST OF ERROR DISPLAY / INDICATION
2.2 Service Call Errors (added to iP5200)
Error NIC BOARD error [6550] Solution (Replacement of listed parts, which are likely to be faulty) NIC BOARD ASSY (QK1-1973-000) Cyclic blinking in orange (Alarm LED) and green (Power LED) 18 times

Faulty operation

Troubleshooting by Symptom
Symptom Printing is not possible with wireless LAN. Solution 1) Perform network setting information print. When printing is not possible. -> Replace the NIC BOARD. When printing is possible. -> Proceed to 2). 2) Perform printing with the wireless LAN I/F. When printing is not possible. -> Replace the NIC BOARD. (Wireless reception component failure on the NIC BOARD) When printing is possible. -> Re-confirm network setting (users environment). Remarks

REPAIR

3.1 Notes on Service Part Replacement (and Disassembling/Reassembling)
Service part NIC BOARD ASSY (QK1-1973-000) Notes on replacement Adjustment/settings Operation check - Network setting information print - Printing with wireless LAN I/F (After printing, EEPROM initialization of NIC BOARD is necessary.)

Network Type : Infrastructure SSID : xxxxx Channel : 10 Encription : OFF Authentication : Open System Attached Information: Link Status Signal Strength Link Quality Transmission Rate TCP/IP Mode IP Address Subnet Mask Default Gateway Wired LAN MAC Address Link Status Transmission Rate TCP/IP Mode IP Address Subnet Mask Default Gateway : Active : 63% : 56% : 36Mbps
: Auto : xxx.xxx.x.xxx : xxx.xxx.xxx.x : x.x.x.x : Disable : xx-xx-xx-xx-xx-xx : Inactive :

: : : :

Printer Access Control MAC Address : OFF IP Address : OFF Admin Password Device Status : OFF : Available
<EEPROM information contents>
Print items: List item for network setting print Contents: Meaning of list items Settable values: Settable values for users Default values: Values at shipment from the plant Items set to default values: Items re-set to the factory values (at shipment) by initialization Print items Contents Settable values Default values * Items set to default values
Printer Firmware Version Wireless LAN Standard Destination MAC Address Network Type SSID
Printer name NIC firmware version Wireless LAN enabled/disabled Compliant wireless LAN standard Corresponding channel list MAC address for wireless LAN on NIC board Operation mode of wireless LAN Set SSID When ANY is set, current SSID is printed in parentheses. Current channel When inactive, left blank Current encryption method Current authentication method
Enabled/Disabled Optional (can be freely set.) [Varies depending on connection status.] OFF/WEP/TKIP/AES Auto /Open System /Shared Key/WPA-PSK/ WPA2-PSK WEP setting: 64/128bit, ASCII/Hex, Key* * Key set by user is displayed. WPA-PSK setting: Character Password /64 Hex digits
IP_5200R (Overseas) [Specific value. fixed] Enabled IEEE 802.11g[fixed] 1B [fixed] [NIC BOARD-specific value. Fixed] Infrastructure [fixed] BJNPSETUP O
Channel Encryption Authentication Wireless LAN setting information TCP/IP(wireless)

[Blank] OFF Open System

Attached Information
Attached information regarding encryption and authentication

[Blank]

Link Status
Signal Strength Link Quality
Status of wireless LAN When wireless LAN is invalid, if nonexistent SSID is set, status becomes Inactive. Other than this case, status becomes Active. Signal strength: 0 - 100 % When inactive, 0 % Communication quality: % When inactive, 0 % Current wireless LAN speed: 1/2/5.5/6/9/11/12/18/24/36/48 /56 Mbps When inactive, left blank IP address setting method When disabled, left blank Current IP address When disabled, left blank Current Subnet mask When disabled, left blank Current default Gateway When disabled, left blank

Inactive -

Transmission Rate
[Varies depending on communication environment.] [Varies depending on communication environment.] [Varies depending on the communicating devices.]
Mode IP Address Subnet Mask Default Gateway
Auto/Manual 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
Auto 192.168.1.123 255.255.255.0 0.0.0.0

O O O O

Wired LAN MAC Address Link Status
Wired LAN enabled/disabled MAC address for wired LAN on NIC board Status of wired LAN When wired LAN is invalid, status becomes Inactive. Other than this case, status becomes Active. Current wireless LAN speed 10/100 Mbps When inactive, left blank IP address setting method When disabled, left blank Current IP address When disabled, left blank Current Subnet mask When disabled, left blank Current default Gateway When disabled, left blank MAC address filtering setting IP address filtering setting

Enabled/Disabled -

Enable [NIC BOARD-specific value. Fixed] Inactive
Wired LAN setting informaton TCP/IP (wired) Security Other

[Blank] -

Mode IP Address Subnet Mask Default Gateway MAC Address IP Address
Auto/Manual 0.0.0.0 - 255.255.255.255 0.0.0.0 - 255.255.255.255 0.0.0.0 - 255.255.255.255 ON/OFF ON/OFF
Auto 192.168.2.123 255.255.255.0 0.0.0.0 OFF OFF

O O O O O O

Admin Password Device Status
Admin password setting Printing of device status When error occurs, error code is displayed. Other than this case, Available is displayed.

ON/OFF

OFF Available

Part 3 1.

BLOCK DIAGRAM

Sub I/F board

NIC board

Logic Board

Ethernet I/F

Wired LAN controller

RAM Wireless LAN I/F
Wireless LAN controller CN302

USB I/F

The parts other than NIC Board and /F board are same as iP5200.
2. PIXMA iP5200R SPECIFICATION (differences from iP5200)

< Specifications >

Interface Printing speed* (Wireless printing) Color (4x6) PP-101 / Standard / Borderless Power consumption Weight Related standards (Proposed) (Printer, Adapter) Wireless LAN, wired LAN interface port (RJ-45) x1 USB 2.0 Hi-Speed x1

56 sec.

Standby: 3 W Off: 0.4 W During printing: Approx. 19 W
7.5 Kg Electromagnetic radiance: VCCI, FCC, IC, CE Mark, C-Tick Electrical safety: Electrical Appliance and Material Safety Law (DENAN), UL, C-UL, CB Report, CE Mark, GS, FT, SPRING Wireless: FCC, IC, CE Mark (R&TTE), ACA, RSM, Telecommunication Act (SPL) Environmental regulations: RoHS (EU), WEEE (EU), Energy Star, Eco Mark, Law on Promoting Green Purchasing, Chemical Substances Control Law, Battery Recycle Law, Container and Packaging Law, Blue Angel