Epson Perfection V700 Photo/V750 Pro

Scanner Parts

Scanner cover
Film holder for filmstrips
Scan button Slide holder Power switch inch film holder
Medium format film holder Document mat
Transparency unit transportation lock Document table
Film area guide (for largeformat film up to inches) Note: The Epson Perfection V750 Pro also includes a fluid mount tray.
Carriage and lamp (in the home position)

Scanner Specifications

General
Scanner type Photoelectric device Effective pixels Flatbed color Color CCD line sensor 40,800 56,160 pixels (4800 dpi) 37,760 62,336 pixels (6400 dpi) Documents or photos: 8.5 11.7 inches (mm) US letter or A4 size Film or slides: inches (203.mm), four 35mm film strips (6 frames each), twelve 35mm slides, two medium format (cm film frame), or two inch film frames
OPTION port FireWire 1394 port USB port

DC inlet

Document size

Cover cable

Scanner transportation lock

Scanning resolution

4800 dpi (main scan) 6400 dpi (main scan) 9600 dpi with Micro Step (sub scan) 50 to 12800 dpi in 1 dpi increments

Output resolution

Epson Perfection V700 Photo/V750 Pro - 1

Scanning speed

V700 Photo: approximately 12.3 msec per line at 4800 dpi V750 Pro: approximately 11.8 msec per line at 4800 dpi Approximately 3.1 msec per line at 600 dpi 16 bits per pixel per color internal 16 bits per pixel per color external (maximum) White cold cathode fluorescent lamp IR LED

Environmental

Temperature Operating 41 to 95 F (5 to 35 C) Storage Humidity Operating conditions Storage 13 to 140 F (25 to 60 C) 10 to 85%, without condensation Ordinary office or home conditions. Avoid operating the scanner in direct sunlight, near a strong light source, or in extremely dusty conditions. Operating 10 to 80%, without condensation

Image data

Light source

Mechanical

Dimensions Width: 19.8 inches (503 mm) Depth: 12.1 inches (308 mm) Height: 6 inches (152.5 mm) Approx. 14.5 lb (6.6 kg)

Interfaces

USB Interface Interface type Universal Serial Bus Specification Revision 2.0

Weight

Electrical
Note: Check the label on the AC adapter or on the back of the scanner for voltage information.
Electrical standard Full Speed mode (12 Mbits per second) and Hi-Speed mode (480 Mbits per second) of Universal Serial Bus Specification Revision 2.0. Connector type One Type B port
Scanner Input voltage Rated voltage Rated current Power consumption DC 24 to 26.4 V DC 24 V 1.4 A 32 W operating 20 W stand-by mode 3.8 W sleep mode
FireWire Interface Interface type IEEE Std 1394a-2000
Electrical standard ANSI X3T10 Serial Bus Protocol 2 Revision 4L (SBP-2) Connector type One 6-pin port
AC Adapter Rated input voltage Rated input current Rated frequency AC 100 to 120 V 0.8 A 50 to 60 Hz

Standards and Approvals

Scanner EMC FCC Part 15 Subpart B Class B CAN/CSA-CEI/IEC CISPR 22 Class B
Rated output voltage DC 24.0 to 26.4 V Rated output current 1.4 A
AC Adapter Safety EMC UL60950-1 CAN/CSA-22.2 No. 60950-1-03 FCC Part 15 Subpart B Class B CAN/CSA-CEI/IEC CISPR22 Class B
2 - Epson Perfection V700 Photo/V750 Pro
Scanning a Document or Photo
Before scanning a document, remember to respect the rights of copyright owners. Do not scan published text or images without first checking their copyright status.
Caution: Do not place heavy objects on the document table glass and do not press the glass with too much force.
3. If you are scanning multiple photos at once, position each photo at least 0.8 inches (20 mm) apart from the others.
Note: If you are scanning large or thick documents, you can remove the scanner cover. See Placing Large or Thick Documents below for instructions.
4. Close the scanner cover gently so that your original does not move.

1. Open the scanner cover. Make sure the document mat is installed inside the cover. If it is not installed, see Replacing the Document Mat on page 9 for instructions.
Note: Always keep the document table clean. Do not leave photos on the document table for an extended period of time as they may stick to the glass.
Placing Large or Thick Documents
2. Place your document or photo on the document table, face down on the glass. Make sure the top of the document or photo is against the upper right corner of the document table. When you scan a large or thick document, you can remove the scanner cover. 1. Turn off the scanner using its P power button. 2. Disconnect the cover cable.
Epson Perfection V700 Photo/V750 Pro - 3
3. Open the scanner cover.

Scanning Film and Slides

Removing the Document Mat
To scan film strips or slides, you need to remove the document mat from the scanner cover. This uncovers the transparency unit so your scanner can use it to scan your film or slides. 1. Make sure the cover cable is connected to the scanners OPTION port.
4. Lift the scanner cover straight up and off the scanner.
Note: Before connecting or disconnecting the cover cable, turn off the scanner using its P power button.
2. Open the scanner cover and gently slide up the document mat to remove it. Also make sure the transparency unit transportation lock is unlocked.
5. Turn on the scanner using its P power button.
Note: When scanning without the scanner cover, gently press down on your document to flatten it.
6. When you are finished scanning, replace the scanner cover in the reverse order that you removed it.
4 - Epson Perfection V700 Photo/V750 Pro
3. Use a soft cloth to wipe the transparency unit window and the document table before placing your film or slides.
3. Place the cover(s) over the film and press them down until they click. Then press down on all the edges of the covers to secure them.
4. Place the film holder on the document table so that it is aligned with the upper right corner and the pins are seated in the holes on the scanner.

To place film or slides for scanning, see the sections below.
Placing Film in the Holder
Placing 35mm Film Strips 1. Remove the film strip cover(s) on the film holder. 2. Slide up to four film strips all the way into the film holder with the shiny base side facing down. Your images and any wording on the film strips should appear backwards on the side that faces up, as shown by the illustration on the film holder. 5. Make sure you removed the document mat. See Removing the Document Mat on page 4. 6. Close the scanner cover. When you are finished scanning film, be sure to replace the document mat before scanning documents or photos. See Replacing the Document Mat on page 9. Placing Medium Format Film 1. Open the cover on the medium format film holder.
Note: Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the film. Make sure the white stickers on the back of the film holder and the areas around them are not scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble recognizing your film in Full Auto Mode. Do not cover any of the tiny holes in the film holder or the scanner may have trouble recognizing which film holder you are using.
2. Slide up to two medium format film images into the film holder with the shiny base side facing down. Your images and any wording on the film should appear backwards on
Epson Perfection V700 Photo/V750 Pro - 5
the side that faces up, as shown by the illustration on the film holder. Make sure the entire image frame is positioned in the film holder opening.
6. Close the scanner cover.
Note: You cannot use Full Auto Mode to scan medium format film.
When you are finished scanning film, be sure to replace the document mat before scanning documents or photos. See Replacing the Document Mat on page 9. Placing inch Film 1. Open the covers on the inch film holder.
2. Place the film into the film holder with the shiny base side facing down. Your images and any wording on the film should appear backwards on the side that faces up, as shown by the illustration on the film holder. Make sure the entire image frame is positioned in the film holder opening.
3. Close the cover over the film and press it down until it clicks. Then press down on all the edges of the cover to secure it.
5. Make sure you removed the document mat. See Removing the Document Mat on page 4.

6 - Epson Perfection V700 Photo/V750 Pro
Note: Make sure the white stickers on the back on the film holder and the areas around them are not scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble recognizing your slides in Full Auto Mode. Do not cover any of the tiny holes in the film holder or the scanner may have trouble recognizing which film holder you are using.
1. Place up to twelve slides in the 35mm slide holder with the shiny base side facing down. Your image should appear backwards on the side that faces up, as shown by the illustration on the film holder. The top of your images should face the open end of the film holder as shown below.
5. Make sure you removed the document mat. See Removing the Document Mat on page 4. 6. Close the scanner cover.
Note: You cannot use Full Auto Mode to scan inch film.
2. Place the film holder on the document table so that it is aligned with the upper right corner and the pins are seated in the holes of the scanner.
When you are finished scanning film, be sure to replace the document mat before scanning documents or photos. See Replacing the Document Mat on page 9.
Placing Slides in the Holder
You can scan up to twelve 35mm slides at a time using the slide holder.
3. Make sure you removed the document mat. See Removing the Document Mat on page 4. 4. Close the scanner cover. When you are finished scanning slides, be sure to replace the document mat before scanning documents or photos. See Replacing the Document Mat on page 9.
Epson Perfection V700 Photo/V750 Pro - 7
Placing Film in the Film Area Guide
You can scan film that cannot be placed in the film holders (up to inch film) using the film area guide in Professional Mode. When scanning film using the film area guide, always select Film (with Film Area Guide) as the Document Type.
Note: You cannot use DIGITAL ICE Technology when scanning film with the film area guide. When scanning using the film area guide, striped (newton) rings may appear in your scanned images.
4. Place the film in the film area guide (up to inch film) with the shiny base side facing down. Your images and any wording on the film should appear backwards on the side that faces up. Make sure the entire image frame is positioned in the film area guide opening.
1. Make sure the tab on the long edge of the film area guide is on the left side.
2. Fold the tab along the perforated lines as shown.
Note: Leave the part of the film area guide shown below uncovered or colors in your scans will be affected.
3. Place the film area guide on the document table with the tab facing the left side of the scanner.
Note: You cannot use Full Auto Mode or Home Mode when scanning film with the film area guide.
8 - Epson Perfection V700 Photo/V750 Pro
Replacing the Document Mat
Replace the document mat by sliding it into the notches in the scanner cover. Make sure the white surface faces outwards.

Removing Dust and Scratch Marks From Film or Slides
Using the Dust Removal feature in EPSON Scans Full Auto or Professional Mode, you can virtually clean the dust marks from film or slides as you scan them.
Your scanner and its EPSON Scan software are equipped with the Digital ICE and Digital ICE Lite features that remove stubborn dust or scratch marks from color film or slides.
DIGITAL ICE will not harm image details while Dust Removal may degrade the image. However, it takes longer to scan using DIGITAL ICE.
Scanning and Restoring Photos
Using the Color Restoration feature in EPSON Scan, you can transform old, faded, or badly exposed photos into ones with true-to-life color. You can restore printed photos, negative film, or slides automatically as you scan them. You can use Color Restoration in EPSON Scans Full Auto, Home, or Professional Mode. For detailed steps, see the on-screen Users Guide.
For detailed steps on using these features, see the on-screen Users Guide.
Reading the Scanner Light
If an error occurs, the scanner stops operating and the scanner light flashes red. This indicates one of the following problems: The scanner is not connected to your computer properly or your software is not fully installed. See the Start Here sheet that came with your scanner for instructions on installing the scanner software and connecting the scanner to your computer. The scanner and/or the transparency unit transportation lock is locked. Slide the lock to the unlock position. The scanner cover cable is not connected to the scanners OPTION port. Connect the cable to the port. After trying these solutions, turn off the scanner using its power button, then turn it back on.

Full Auto Mode

If the scanner light is still flashing: The scanner may be malfunctioning. The scanner lamp may need to be replaced. The connected optional equipment may be malfunctioning. Contact Epson. See the on-screen Users Guide for details.
Home and Professional Mode
Epson Perfection V700 Photo/V750 Pro - 9

Transporting the Scanner

Before transporting the scanner for a long distance or storing it for an extended period of time, you need to lock the scanners carriage and transparency unit to prevent damage. 1. Plug in the scanner, turn on the scanner using its power button, and wait until the carriage moves to the home position (near the cover hinge). While the scanner light is green, turn off the scanner using its power button. 2. Open the scanner cover and slide the transparency unit transportation lock to the locked position. Then close the scanner cover.
5. On the back of the scanner, slide the transportation lock to the locked position to secure the scanner carriage.
6. Attach the protective materials that came with the scanner, then repack the scanner in its original box or a similar box that fits the scanner snugly.

Related Documentation

CPD-21124 CPD-21125 CPD-21126 CPD-21127 3. Disconnect the scanners interface cable from your computer. 4. Disconnect the scanners cover cable. Epson Perfection V700 Photo/V750 Pro Start Here sheet Epson Perfection V700 Photo/V750 Pro Notices booklet Epson Perfection V700 Photo/V750 Pro Scanner Software CD-ROM Epson Perfection V700 Photo/V750 Pro Users Guide (HTML on CD-ROM) Epson Perfection V750 Pro Using Yopur Epson Fluid Mount Accessory booklet
10 - Epson Perfection V700 Photo/V750 Pro

Educational Technology Stanford University School of Medicine Division of Information Resources & Technology http://med.stanford.edu/edtech 650.723.6952
Scanning Slides Using the Epson Perfection V700
STEP 1: Loading and Activating the Scanner
First, load your slides (up to twelve at a time) into the slide tray. Next, close the lid and firmly press the circular button.
Wait a minute, and the EPSON Scan menu will appear. If the scan begins automatically, skip to step three.
STEP 2: Starting the Scan
Make sure the Mode drop-down menu has Full Auto Mode selected.

Click Scan.

STEP 3: Retrieving your Files
Once the scan has completed, your images will be saved to the newscans folder on the desktop.
Your files will be at the bottom of the list.