NEW JERSEY:

"IT IS A CRIMINAL OFFENSE TO LEAVE A LOADED FIREARM WITHIN EASY ACCESS OF A MINOR."

NEW YORK CITY:

"THE USE OF A LOCKING DEVICE OR SAFETY LOCK IS ONLY ONE ASPECT OF RESPONSIBLE FIREARM STORAGE. FOR INCREASED SAFETY, FIREARMS SHOULD BE STORED UNLOADED AND LOCKED IN A LOCATION THAT IS BOTH SEPARATE FROM THEIR AMMUNITION AND INACCESSIBLE TO CHILDREN AND OTHER UNAUTHORIZED PERSONS."

NORTH CAROLINA:

"IT IS UNLAWFUL TO STORE OR LEAVE A FIREARM THAT CAN BE DISCHARGED IN A MANNER THAT A REASONABLE PERSON SHOULD KNOW IS ACCESSIBLE TO A MINOR."

TEXAS:

"IT IS UNLAWFUL TO STORE, TRANSPORT, OR ABANDON AN UNSECURED FIREARM IN A PLACE WHERE CHILDREN ARE LIKELY TO BE AND CAN OBTAIN ACCESS TO THE FIREARM."

WISCONSIN:

"IF YOU LEAVE A LOADED FIREARM WITHIN THE REACH OR EASY ACCESS OF A CHILD YOU MAY BE FINED OR IMPRISONED OR BOTH IF THE CHILD IMPROPERLY DISCHARGES, POSSESSES, OR EXHIBITS THE FIREARM. PLEASE CHECK WITH YOUR FIREARMS RETAILER OR STATE POLICE FOR ADDITIONAL REQUIREMENTS UNDER STATE OR LOCAL LAWS OR REGULATIONS. SUCH LAWS AND REGULATIONS CHANGE CONSTANTLY, AND LOCAL AUTHORITIES ARE IN THE BEST POSITION TO ADVISE YOU ON SUCH CHANGES.
2. POINT THE MUZZLE IN A SAFE DIRECTION AT ALL TIMES. A SAFE DIRECTION IS ONE IN WHICH, IF THE FIREARM WERE TO DISCHARGE, THERE WOULD BE NO INJURY TO ANYONE. NEVER POINT A GUN (WHETHER YOU THINK IT IS LOADED OR UNLOADED - SEE RULE #1 ABOVE) DIRECTLY AT ANOTHER PERSON OR AT YOURSELF CONSIDER THAT A. BULLET CAN RICOCHET (GLANCE OFF) PAVEMENT, FLOORS, WALLS, ROCKS, THE GROUND, WATER, ICE OR ALMOST ANY OTHER OBJECT IT STRIKES. ALSO, BULLETS CAN PENETRATE WALLS, CEILINGS, FLOORS, DOORS, WINDOWS, AND MANY OTHER MATERIALS TO KILL OR INJURE SOMEONE ON THE OPPOSITE SIDE. 3. KEEP YOUR FINGER OFF THE TRIGGER AND OUTSIDE THE TRIGGER GUARD UNTIL YOU ARE AIMED AT A PROPER TARGET AND HAVE DECIDED TO FIRE. IF YOUR FINGER IS INSIDE THE TRIGGER GUARD, YOU COULD FIRE YOUR GUN WITHOUT INTENDING TO - FOR INSTANCE, IF YOU WERE STARTLED, OR IF YOU SLIPPED OR LOST YOUR BALANCE. BY KEEPING YOUR FINGER OUTSIDE THE TRIGGER GUARD UNTIL YOU ARE ON TARGET AND INTEND TO FIRE, YOU ENSURE THAT YOU WILL NEVER HIT ANYTHING YOU DO NOT INTEND TO. 4. BE SURE OF YOUR TARGET, AND WHAT IS AROUND AND BEYOND IT. THE BULLET FIRED FROM YOUR PISTOL CAN TRAVEL OVER A MILE, AND HAS THE POTENTIAL TO KILL OR SERIOUSLY INJURE SOMEONE AT THAT DISTANCE!

BASIC RULES OF FIREARMS SAFETY
1. TREAT ALL FIREARMS AS IF THEY WERE LOADED, AT ALL TIMES. MANY ACCIDENTS OCCUR WITH FIREARMS THAT ARE HANDLED CARELESSLY, BECAUSE THEY ARE BELIEVED TO BE UNLOADED. THESE ACCIDENTS CAN BE AVOIDED BY HANDLING ALL FIREARMS THE SAME WAY YOU WOULD HANDLE A LOADED FIREARM, AT ALL TIMES. EVEN AFTER YOU VERIFY THAT A GUN IS UNLOADED, YOU SHOULD CONTINUE HANDLING IT AS YOU WOULD A LOADED GUN, AND MAKE SURE THAT OTHERS AROUND YOU DO THE SAME. 6
ONCE YOU PULL THE TRIGGER, YOU CANNOT CALL THE BULLET BACK, SO YOU MUST POSITIVELY IDENTIFY YOUR TARGET BEFORE YOU FIRE. NEVER FIRE (FOR INSTANCE, AT A NOISE, A MOVEMENT, A RUSTLING BUSH, OR A SHAPE IN THE DARK) UNTIL YOU HAVE POSITIVELY IDENTIFIED YOUR TARGET AS SOMETHING YOU INTEND TO SHOOT. FIRE ONLY WITH A SAFE BACKSTOP BEHIND YOUR TARGET - SOMETHING THAT WILL STOP AND CONTAIN THE PROJECTILES YOU FIRE, EVEN IF YOU MISS THE TARGET OR YOUR BULLET PASSES THROUGH IT. 5. WHENEVER YOU HANDLE A FIREARM THAT, EVEN MOMENTARILY, HAS BEEN OUT OF YOUR DIRECT CONTROL, START BY CHECKING ITS CONDITION TO DETERMINE WHETHER OR NOT IT IS LOADED. A FIREARM IN YOUR HANDS IS A LETHAL WEAPON WHICH IS YOUR RESPONSIBILITY, SO YOU MUST CHECK IT YOURSELF NOW, , NOT LATER. DO NOT RELY ON SOMEONE ELSE TO CHECK IT. DO NOT TAKE SOMEONE ELSES WORD FOR THE FIREARMS CONDITION. DO NOT RELY ON YOUR MEMORY OF HAVING CHECKED THE FIREARM PREVIOUSLY, OR ON YOUR BELIEF THAT YOU LEFT IT UNLOADED THE LAST TIME YOU USED OR HANDLED IT. CHECK IT AGAIN YOURSELF NOW. 6. NEVER GIVE A FIREARM TO ANYONE, OR TAKE A FIREARM FROM ANYONE, UNLESS IT IS UNLOADED AND THE ACTION IS OPEN. IF SOMEONE TRIES TO HAND YOU A FIREARM WITH THE ACTION CLOSED, POLITELY ASK THEM 7
TO OPEN IT BEFORE YOU TAKE IT FROM THEM. IF YOU NEED TO OPEN THE ACTION OF A FIREARM WITH WHICH YOU ARE NOT FAMILIAR, DONT EXPERIMENT, LEST YOU MAKE A FATAL MISTAKE! INSTEAD, ASK SOMEONE WHO KNOWS HOW TO HANDLE THE FIREARM TO OPEN THE ACTION AND ALLOW YOU TO VERIFY THAT IT IS UNLOADED. IF YOU CANT FIND SOMEONE WHO KNOWS HOW TO HANDLE THE FIREARM, LEAVE IT ALONE! 7. FIREARMS SHOULD BE UNLOADED WHEN NOT ACTUALLY IN USE. LOAD YOUR FIREARM ONLY WHEN YOU ARE ON THE TARGET RANGE OR IN THE FIELD AND READY TO BEGIN USING IT. UNLOAD YOUR GUN AS SOON AS YOU ARE FINISHED SHOOTING. UNLOAD YOUR GUN BEFORE YOU BRING IT BACK INTO YOUR CAR, CAMP OR HOME. NEVER LEAVE A LOADED GUN UNATTENDED, EVEN FOR A MOMENT. 8. THOROUGHLY READ AND UNDERSTAND THE OWNERS MANUAL AND OTHER LITERATURE SUPPLIED WITH THIS PISTOL. NEVER USE ANY FIREARM UNLESS YOU COMPLETELY UNDERSTAND HOW IT OPERATES AND HOW ITS SAFETY FEATURES WORK. CONTACT MAGNUM RESEARCH, INC. IF YOU HAVE ANY QUESTIONS OR CONCERNS, OR IF YOU ARE NOT CERTAIN YOU HAVE ALL THE LITERATURE SUPPLIED WITH THE FIREARM AT THE TIME IT WAS FIRST SOLD. EVEN IF YOU UNDERSTAND EVERYTHING IN THIS MANUAL, NO MANUAL CAN PROVIDE YOU WITH THE BENEFITS OF HANDS-ON FIREARMS INSTRUCTION. IF YOU ARE NOT

ALREADY AN EXPERIENCED FIREARMS USER, YOU SHOULD OBTAIN TRAINING IN THE SAFE AND PROPER USE OF FIREARMS BY ATTENDING ONE OF THE MANY FIREARMS SAFETY AND SHOOTING COURSES OFFERED IN ALL PARTS OF THE COUNTRY BY THE NATIONAL RIFLE ASSOCIATION (TELEPHONE 703-267-1000), GUN CLUBS AND RANGES, GUN SHOPS, SHOOTING SCHOOLS AND OTHER QUALIFIED SOURCES OF INSTRUCTION. 9. BEFORE FIRING ANY FIREARM, BE SURE IT IS IN GOOD WORKING ORDER AND THAT THE BARREL IS CLEAR OF DIRT, GREASE, WATER, EXCESS OIL, RUST, CORROSION OR ANY OTHER OBSTRUCTION. 10. ALWAYS WEAR HIGH-QUALITY EAR AND EYE PROTECTION WHEN SHOOTING OR OBSERVING, AND BE SURE THAT OTHERS WHO ARE PRESENT DO THE SAME. EXPOSURE TO GUNFIRE NOISE WILL CAUSE PERMANENT HEARING LOSS (DEAFNESS) IF GOOD EAR PROTECTION (EITHER COMMERCIALLY MANUFACTURED EAR PLUGS, EARMUFF-TYPE HEARING PROTECTORS, OR BOTH) IS NOT WORN. CLOSE-FITTING, IMPACT-RESISTANT SHOOTING GLASSES OR SAFETY GLASSES OF WRAPAROUND OR SIDE-PANEL DESIGN HELP TO GUARD AGAINST POTENTIALLY BLINDING EYE INJURIES CAUSED BY GRANULES OF POWDER, SPLASHBACK OF FRAGMENTS FROM THE TARGET OR BACKSTOP METAL FRAGMENTS WHICH CAN RESULT FROM , A BURST PRIMER, ETC. NEVER SHOOT A FIREARM, OR ALLOW YOURSELF OR OTHERS TO BE PRESENT WHERE SHOOTING IS IN PROGRESS, WITHOUT BOTH EYE AND EAR 8
PROTECTION IN PLACE. EYE PROTECTION CAN ALSO PROVIDE IMPORTANT PROTECTION WHILE YOU ARE DISASSEMBLING AND CLEANING YOUR FIREARMS, BOTH FROM FLYING FIREARMS PARTS, AND FROM AEROSOLS AND OTHER SOLVENTS AND CLEANING FLUIDS THAT CAN SPRAY OR SPLASH INTO YOUR EYES, CAUSING SERIOUS EYE INJURY. 11. FIREARMS, DRUGS AND ALCOHOL DONT MIX! NEVER HANDLE FIREARMS WHILE UNDER THE INFLUENCE OF ALCOHOL OR DRUGS (INCLUDING PRESCRIPTION MEDICATIONS) THAT CAN IMPAIR YOUR NORMAL SENSES, ABILITIES, ALERTNESS, REFLEXES, PERCEPTION OR JUDGMENT. MAKE SURE EVERYONE IN YOUR PRESENCE FOLLOWS THE SAME RULE. ALSO, AVOID HANDLING FIREARMS WHEN YOU ARE ILL, EXHAUSTED, UPSET OR PREOCCUPIED WITH OTHER CONCERNS - SAFE FIREARMS HANDLING REQUIRES YOUR FULL ATTENTION, AND ALL OF YOUR ABILITIES, UNIMPAIRED BY OTHER FACTORS. 12. ANY FIREARM WHICH IS NOT UNDER YOUR DIRECT CONTROL SHOULD BE STORED SO IT IS INOPERABLE OR INACCESSIBLE TO CHILDREN AND OTHER UNAUTHORIZED USERS. CHILDREN ARE ATTRACTED TO, AND CAN FIND, LOAD AND OPERATE FIREARMS, CAUSING SERIOUS INJURY OR DEATH TO THEMSELVES AND OTHERS. PREVENTING CHILD ACCESS AND TRAGIC, AVOIDABLE ACCIDENTS IS YOUR RESPONSIBILITY, AS AN ADULT GUN OWNER. THE SAFEST WAY TO STORE FIREARMS IS UNLOADED, LOCKED IN A GUN SAFE OR VAULT.

13. USE ONLY PROPER AMMUNITION RECOMMENDED FOR THIS PISTOL, AND BE SURE THE AMMUNITION IS THE CORRECT CALIBER FOR YOUR GUN. MOST MODERN FIREARMS HAVE THEIR CALIBER DESIGNATION STAMPED INTO THE FIREARMS BARREL OR RECEIVER. YOUR AMMUNITION BOX AND CARTRIDGE HEAD STAMP SHOULD BEAR THE EXACT SAME CARTRIDGE DESIGNATION. JUST BECAUSE A CARTRIDGE FITS INTO THE GUN DOESNT MEAN IT IS SAFE TO FIRE. NEVER FIRE AMMUNITION WHICH IS DAMAGED, CORRODED, OR OF QUESTIONABLE ORIGIN OR CONDITION. FIRING EVEN A SINGLE DEFECTIVE CARTRIDGE CAN DESTROY YOUR DESERT EAGLE PISTOL AND CAUSE SERIOUS INJURY OR DEATH.
OR YOU COULD THINK YOUR GUN IS UNLOADED WHEN IT IS LOADED. ALWAYS FOLLOW THE SAFE GUN HANDLING RULES AND PROCEDURES IN THIS MANUAL, WHETHER YOU THINK THE SAFETY IS ON OR OFF AND WHETHER , YOU THINK THE PISTOL IS LOADED OR UNLOADED. DONT PULL THE TRIGGER WHEN THE SAFETY IS ENGAGED, OR WHEN IT IS POSITIONED PART WAY BETWEEN SAFE AND FIRE. DONT USE OR RELY ON THE SAFETY LEVER TO TRY TO CHILDPROOF YOUR PISTOL OR KEEP IT SAFE FROM UNTRAINED PERSONS - INSTEAD, YOUR PISTOL SHOULD BE UNLOADED AND SECURELY LOCKED UP AWAY FROM , ACCESS OF CHILDREN AND OTHER UNAUTHORIZED USERS. WARNING! THE DESERT EAGLE PISTOL WILL FIRE WHETHER OR NOT A MAGAZINE IS IN THE GUN IF A CARTRIDGE IS IN THE CHAMBER. REMOVING THE MAGAZINE DOES NOT UNLOAD THE PISTOL, AND DOES NOT PREVENT THE PISTOL FROM FIRING! A CARTRIDGE LEFT IN THE CHAMBER AFTER THE MAGAZINE IS REMOVED CAN CAUSE SERIOUS INJURY OR DEATH IF THE TRIGGER IS PULLED! UNLOAD YOUR DESERT EAGLE PROPERLY, INCLUDING CHECKING THE CHAMBER BOTH VISUALLY AND PHYSICALLY. WARNING! KEEP YOUR FINGER OFF THE TRIGGER AND OUTSIDE THE TRIGGER GUARD UNTIL YOU ARE AIMED AT A PROPER TARGET AND HAVE DECIDED TO FIRE. FAILURE TO DO SO COULD CAUSE SERIOUS INJURY OR DEATH. 9
SAFETY RULES AND PRECAUTIONS FOR FIRING AND USE OF YOUR DESERT EAGLE
W ARNING! KEEP THE SAFETY ENGAGED IN THE SAFE POSITION UNTIL YOU ARE AIMED AT A PROPER TARGET AND HAVE DECIDED TO FIRE. FAILURE TO DO SO COULD CAUSE SERIOUS INJURY OR DEATH. WARNING! USE THE SAFETY ON THIS PISTOL, BUT DONT TRUST OR RELY ON IT AS A SUBSTITUTE FOR SAFE GUN HANDLING PRACTICES. THE SAFETY IS A MECHANICAL DEVICE WHICH COULD FAIL. OR, BY MISTAKE, YOU MAY THINK THE SAFETY IS ON WHEN IT IS NOT. OR THE SAFETY MAY BECOME DISENGAGED WITHOUT YOUR KNOWLEDGE.

THE PLACE YOU INTEND TO SHOOT. WARNING! USE ONLY APPROPRIATE ACCESSORIES FOR YOUR DESERT EAGLE PISTOL. BE SURE ALL ACCESSORIES, INCLUDING HOLSTERS, SIGHTS AND SIGHT MOUNTS, LIGHTING DEVICES, ETC. ARE COMPATIBLE WITH THE FIREARM AND DO NOT INTERFERE WITH ITS SAFE OPERATION. IF IN DOUBT, CONSULT MAGNUM RESEARCH, INC. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED BY THE USE OF IMPROPER ACCESSORIES. WARNING! WHEN SHOOTING, BE ALERT TO BE SURE NO ONE COMES INTO THE LINE OF FIRE. CHECK THE BACKSTOP AND TARGET AREA CAREFULLY TO BE SURE IT IS FREE OF PEOPLE EACH TIME BEFORE YOU BEGIN TO FIRE. WARNING! WHEN FIRING WITH A GROUP OF PEOPLE, PUT A RESPONSIBLE PERSON IN CHARGE TO MAINTAIN SAFETY, DISCIPLINE AND CONTROL. TO REDUCE THE CHANCE OF ACCIDENTS ON A FIRING RANGE, BE ALERT TO THE COMMANDS OF THE RANGE OFFICER, AND FOLLOW THEM PRECISELY AND IMMEDIATELY. WARNING! DO NOT HANDLE A FIREARM WHEN ANYONE IS FORWARD OF THE FIRING POSITION. BEFORE ANYONE MOVES DOWNRANGE TO POST OR CHECK TARGETS OR FOR ANY OTHER PURPOSE, ALL FIREARMS SHOULD BE UNLOADED, WITH SAFETIES ENGAGED AND ACTIONS LOCKED OPEN, AND PLACED SAFELY ON THE BENCH WHERE THEY SHOULD NOT BE TOUCHED OR HANDLED UNTIL EVERYONE RETURNS FROM DOWNRANGE.
WARNING! DO NOT HANDLE FIREARMS WHEN YOU ARE TIRED, COLD OR IMPAIRED PHYSICALLY OR MENTALLY, IN ANY WAY. WARNING! NEVER FIRE YOUR DESERT EAGLE NEAR AN ANIMAL, UNLESS IT IS TRAINED TO ACCEPT THE NOISE OF GUNFIRE. AN ANIMALS STARTLED REACTION TO THE SOUND OF GUNFIRE COULD INJURE IT OR COULD CAUSE AN ACCIDENT. WARNING! NEVER CONTINUE TO USE YOUR DESERT EAGLE IF IT IS NOT FUNCTIONING PROPERLY. NEVER FORCE A JAMMED ACTION, AS THE JAMMED CARTRIDGE MAY EXPLODE IF THE PRIMER IS CRUSHED OR PRESSED AGAINST ANY METAL PART OF THE PISTOL.
WARNING! IF YOUR DESERT EAGLE FAILS TO DISCHARGE ("MISFIRE"), REMOVE YOUR FINGER FROM THE TRIGGER. KEEP THE PISTOL POINTED IN A SAFE DIRECTION FOR 30 SECONDS. REMOVE THE CARTRIDGE FROM THE CHAMBER AND DISPOSE OF IT PROPERLY. WARNING! IF THE SOUND FROM YOUR AMMUNITION DOES NOT SOUND NORMAL, A LOW POWERED ("SQUIB") LOAD MAY HAVE LEFT A BULLET IN THE BARREL. IF THIS OCCURS, DO NOT FIRE ANOTHER CARTRIDGE! INSTEAD UNLOAD THE PISTOL AND REMOVE THE BARREL AND CHECK FOR A BARREL OBSTRUCTION. FIRING A CARTRIDGE WITH A BORE OBSTRUCTION CAN RESULT IN DESTRUCTION OF YOUR DESERT EAGLE AND POTENTIAL INJURY OR DEATH TO YOU OR SOMEONE NEARBY.

WARNING: AMMUNITION

NEVER USE AMMUNITION NOT SPECIFICALLY DESIGNATED FOR USE IN YOUR FIREARM. PROPER AMMUNITION FOR YOUR DESERT EAGLE WILL BE DESIGNATED ON THE LEFT SIDE OF THE BARREL. FAILURE TO USE THE CORRECT TYPE OR CALIBER OF AMMUNITION MAY CAUSE THE FIREARM TO JAM, FAIL TO FIRE, CAUSE A BORE OBSTRUCTION OR MAY GENERATE EXCESSIVE PRESSURE WHICH CAN DESTROY THE PISTOL AND CAUSE PERSONAL INJURY OR DEATH. NEVER USE NON-STANDARD, RELOADED OR "HANDLOADED" SHELLS. AMMUNITION THAT IS IMPROPERLY MANUFACTURED MAY FAIL TO FIRE, MAY RESULT IN A "SQUIB" LOAD RESULTING IN A BORE OBSTRUCTION OR MAY GENERATE EXCESSIVE PRESSURES WHICH CAN DESTROY THE PISTOL AND CAUSE PERSONAL INJURY OR DEATH. SEMI-JACKETED BULLETS PROVIDE BEST FUNCTION AND RELIABILITY. DO NOT USE UNJACKETED LEAD BULLETS. FULL METAL JACKET BULLETS MAY BE USED IF THEY HAVE A FULLY ENCAPSULATED BASE (NO OPEN LEAD CORE BASE).THE DESERT EAGLE PISTOLS ARE DESIGNED FOR:.357 MAGNUM AMMUNITION (158 GRAINS) /.41 MAGNUM AMMUNITION (210 GRAINS) /.44 MAGNUM AMMUNITION (240 GRAINS) /.50 ACTION EXPRESS AMMUNITION (300 GRAINS) /.440 CORBON MAGNUM(240, 260 AND 305 GRAINS) IN ACCORDANCE WITH INDUSTRY STANDARDS (SAAMI STD); USE OF NON-STANDARD OR RELOADED AMMUNITION NULLIFIES THE FACTORY WARRANTY. FOR MORE INFORMATION ABOUT OTHER COMMERCIAL LOADS WHICH WORK IN THE DESERT EAGLE PISTOL, WRITE TO MAGNUM RESEARCH, 7110 UNIVERSITY AVENUE NE, MINNEAPOLIS, MN 55432.

WARNING: RECOIL SPRING ASSEMBLY INSTALLATION
TO PREVENT DAMAGE TO YOUR PISTOL BE SURE,BEFORE FIRING, TO INSPECT THE RECOIL SPRING INSTALLATION FOR PROPER ARRANGEMENT (SEE PAGES 28 & 29 FOR DETAILS). FAILURE TO DO SO MAY RESULT IN A BROKEN PISTOL.
Initial Cleaning 1. Upon receipt of the pistol, disassemble (see page 26) and inspect it. 2. Clean pistol as per periodic maintenance procedure. 3. Any heavy or sticky deposits of protective material may be removed, using very light rust-preventive oil. After cleaning, wipe dry and coat lightly with gun oil. 4. Never use abrasive or metallic objects, synthetic cloth, dry cleaning fluids,detergents, acids, lye, water or steam for cleaning. 5. Reassemble pistol (see page 28) and make sure it is functioning properly.

WARNING

ALL FIREARMS ARE DANGEROUS OBJECTS - PISTOLS INCLUDED. ALWAYS CONSIDER THE PISTOL LOADED. TO RENDER IT SAFE, FIRST PLACE THE SAFETY IN THE ON POSI TION, THEN REMOVE THE MAGAZINE, AND EJECT ANY REMAINING ROUND BY PULLING THE SLIDE TO THE REAR. IT IS DANGEROUS TO ALTER OR MODIFY THIS FIREARM IN ANY WAY. ANY ALTERATIONS OR MODIFICATIONS OF THE FIRING MECHANISM MAY RESULT IN THIS FIREARM BECOMING UNSAFE AND NULLIFIES THE FACTORY WARRANTY. USER IS ADVISED TO READ THE ENTIRE MANUAL PRIOR TO HANDLING THE PISTOL FOR THE FIRST TIME.

5 IN 1 DISASSEMBLY TOOL

1. Reamer Head - used to clean lead deposits from the gas cylinder. Remove barrel from pistol (Pg 26-23), place reamer head in cylinder and work back and forth to remove lead deposit. 2. Firing Pin Tool - used to push in the firing pin, to allow removal of firing pin stop, to allow removal of firing pin. 3. Bolt Guide Pin Tool - used to pull the bolt guide pin, from the bottom of the slide to remove bolt from slide. NOTE: Firing pin must be removed first. 4. Grip Pin Tool - used to push in grip pin, to allow removal of handgrips. 5. Magazine Disassembly Tool - used to push in the magazine base catch pin on the bottom of the magazine to allow removal of base and disassembly of magazine. (WARNING: Wear safety glasses when disassembling the magazine the magazine spring is under tension and could cause serious eye injury if released suddenly.)

10.75 inches (27.3 cm) 14.75 inches (37.5 cm) 6.25 inches (15.9 cm) 1.25 inches (32 mm) 2.75 inches (70 mm) 8.5 inches (215 mm) 1990.14 grams (4lbs. 6.2 oz.) 1 turn in 14 inches (355mm) 9 rounds.357 (9.1 mm)

Mark XIX.440 CorBon

10.75 inches (27.3 cm) 14.75 inches (37.5 cm) 6.25 inches (15.9 cm) 1.25 inches (32 mm) 2.75 inches (70 mm) 8.5 inches (215 mm) 1990.14 grams (4lbs. 6.2 oz.) 1 turn in 19 inches (48.3 cm) 7 rounds.429 (10.9 mm)

Mark VII.44 Magnum

Length, with 6-inch barrel Length, with 10-inch barrel Height Width Trigger reach Sight radius (with 6-inch barrel) Weight w/ empty magazine (6-inch) Polygonal rifling (right-hand twist) Magazine capacity Bore diameter 10.48 inches (266 mm) 14.75 inches (375 mm) 6.1 inches (155 mm) 1.25 inches (32 mm) 2.75 inches (70 mm) 8.5 inches (215 mm) 1899.42 grams (4lbs. 3oz.) 1 turn in 18 inches (457 mm) 8 rounds.429 (10.9 mm)

Mark XIX.44 Magnum

10.75 inches (27.3 cm) 14.75 inches (37.5 cm) 6.25 inches (15.9 cm) 1.25 inches (32 mm) 2.75 inches (70 mm) 8.5 inches (215 mm) 1990.14 grams (4 lbs. 6.2 oz.) 1 turn in 18 inches (457 mm) 8 rounds.429 (10.9 mm)

Mark XIX.50 AE

10.75 inches (27.3 cm) 14.75 inches (37.5 cm) 6.25 inches (159 mm) 1.25 inches (32 mm) 2.75 inches (70 mm) 8.5 inches (215 mm) 1990.14 grams (4 lbs. 6.2 oz.) 1 turn in 19 inches (48.3 cm) 7 rounds.495 (12.6 mm)
Technical data may not be exact due to production/model/specification changes.

Mechanical Features

Rifling Type: Method of operation Method of locking R.H. 6-Rib polygon barrel Gas Rotating Bolt

Sights

Combat sights Sight line radius, 215mm (8.5") (6-inch barrel)

OPERATING PRINCIPLES

Prior to firing the pistol, the bolt is locked by three lugs in the barrel assembly. Upon firing the pistol, propellant gases pass through a hole underneath the bore of the barrel into the gas cylinder and push the piston, which in turn moves the slide backwards. During this movement the bolt is unlocked and carried to the rear by the slide, but not before, the pressure in the chamber is reduced. When the bullet has left the barrel the empty cartridge case is extracted and ejected by the continuing movement of the slide and the bolt to the rear. At the same time, the slide pushes the hammer downward into the cocked position, where it is retained by the sear. The recoil springs are compressed.

fig. 2

.357/.41/.44 Magnum.50 Action Express.440 CorBon

Forward Movement

When the recoil springs expand, they drive the slide and bolt forward. During this movement the bolt cannot rotate due to the stabilizer pin which retains it. When the bolt scoops another round from the magazine and inserts it into the chamber, the locking lugs on the bolt come into contact with the recesses in the barrel and the bolt is rotated thus locking the cartridge in the chamber. Now the trigger bar is opposite the recess in the safety and can move upward, thus engaging the sear. When pulling the trigger, the sear releases the hammer which in turn hits the firing pin thus firing the chambered cartridge. (fig. 3) When the last cartridge is fired and the empty case is ejected, the slide is retained in its rear position by the slide catch. The slide catch is actuated by the magazine follower. The catch releases the slide when depressed by hand or when the slide is pulled slightly to the rear.

fig. 3

Safety Features
The safety catch levers are located at the rear of the slide, just below the rear sight. They are accessible from either side of the pistol. When pushing the front end of the safety catch lever downward, the safety catch is engaged. In this position the firing pin movement is closed by the safety catch and the trigger bar, which is pushed down, cannot engage the sear, thus neutralizing the trigger (fig. 4). It should be noted that due to the above features, it is not possible to engage the sear when the bolt is not locking properly. Due to the unique blocking of the firing pin by the safety, the pistol will not fire when dropped accidentally on its hammer or on its muzzle when the safety is properly engaged (on SAFE).

fig. 4

OPERATING INSTRUCTIONS

Safety Checks

1. Pull hammer slightly to the rear until a click is heard; the hammer is now in semi-cocked position. 2. Move the front end of the safety catch lever down into the SAFE position. 3. Press the magazine release button on the left hand side of the pistol and remove the magazine (fig. 5). 4. Draw the slide to the rear, check the chamber visually to ensure that the pistol is unloaded and release the slide. 5. Point the pistol in safe direction and pull the trigger to check whether the safety is working properly (the hammer should not move). 6. Move the safety lever up into the FIRE position; a red dot will be visible. 7. Pull hammer back slightly and pull the trigger to release the hammer. 8. Pull the hammer into semi-cocked position and move the safety catch lever into the SAFE position.

fig. 9 (Mark I pictured)

Unloading the pistol 1. Place the safety catch lever in the SAFE position. 2. Press the magazine release button and remove the magazine. 3. Pull the slide to the rear and eject the chambered cartridge. Check visually that the chamber is empty. 4. Place the safety catch lever in the FIRE position, point the pistol in a safe direction and lower the hammer with your thumb while pulling the trigger. 5. Pull the hammer back into its semi-cocked position and place the safety catch lever in the SAFE position. 6. Empty the magazine (see page 21).

fig. 10

If slide is difficult to release in this manner, proceed as follows: hold pistol with both hands, place left thumb on slide catch, place right thumb on top of left thumb, then push straight down.

DISASSEMBLY AND ASSEMBLY

General This chapter deals with those disassembling operations and assembling operations which the user should carry out for routine maintenance of the pistol. Disassembling or assembling of any other parts is not recommended and will void all warranties. Disassembly should be carried out on a clean surface and the disassembled parts should be placed in order of their removal. FIELD STRIPPING Carry out the following operations before disassembling: 1. Remove the magazine (fig. 5) and engage safety ON. 2. Pull the slide back and check the chamber visually and physically to make sure it is empty. 3. Place the safety catch lever in the FIRE position, point the pistol in a safe direction and lower the hammer with your thumb while pulling the trigger. Disassembly 1. Pull the hammer slightly to the rear until a click is heard; the hammer is now in semicocked position. 2. Move the front end of the safety catch lever down into its SAFE position. 3. Press the barrel lock pin in on the left side of the pistol and at the same time swing the barrel lock on the other side of the pistol counter clockwise (fig. 11). 4. Pull the barrel slightly forward to release it and lift it out. 5. Draw the slide forward and remove it (fig. 12). This allows the recoil springs assembly to be pulled forward and easily removed (.357). On.41,.44,.440 and.50 the recoil spring comes out with slide assembly.

WARNING: SAFETY CYLINDER IT IS POSSIBLE TO ASSEMBLE THE SAFETY CYLINDER IN A BACKWARD/REVERSE ORDER. IF THIS HAPPENS, THE SAFETY AND FIRE FUNCTION INDICATORS WILL ALSO BE REVERSED. THE GUN WILL THEN FIRE WHEN ON SAFE. DO NOT DISASSEMBLE THE SAFETY. FOR SERVICE ON SAFETY CONTACT MAGNUM RESEARCH, INC. CUSTOMER SERVICE.

fig. 11

fig. 12
ASSEMBLY (.357,.41,.44,.440 &.50)
1. Turn the slide upside down and place it on a level surface. 2. Insert the piston into place (fig. 14). Make sure the piston shaft recess is facing the slide recess. The other piston shaft recess will face up. 3. Engage piston shaft with recoil spring plate lug and the slide. 4. Use your thumb to push the base of the spring plate assembly against the slide, supporting the slide all the way to align the spring assembly in parallel with the slide. 5. Keeping the spring assembly parallel to the slide, draw the frame all the way into the slide (do not compress the spring).
Mark VII.41,.44 Mark XIX.357,.44,.440,.50
6. Stand the pistol upright and verify that the spring ends are correctly positioned in place (2 holes) within the frame (above the trigger). WARNING: Make sure that the gas piston is in place and cannot be pulled out. 7. Insert barrel lock lug into frame recess through the slide. 8. Push against the barrel from the muzzle end and hold the barrel assembly against the frame (fig. 15). Now swing the barrel lock clockwise into closed position. 9. Check correct pistol operation by cocking and releasing the hammer and verify that the safety is functioning properly and safely.

fig. 14

fig. 15
ASSEMBLY (.357 Magnum Mark I & VII) 1. Insert recoil spring assembly into frame from its front end, open end first with the sharp corner of the spring plate down (rounded forward edge of spring plate up) (fig. 15a). Now push the recoil spring assembly fully home into its recesses in the frame. It is important to have the spring plate in the proper position. 2. Mount the slide onto the frame and draw it to the rear. 3. Hold the slide back against slight spring tension and place the barrel lock lug in the slide recess. 4. Push against the barrel from the muzzle end and hold the barrel assembly against the frame. Now swing the barrel lock clockwise into its closed position. 5. Insert the magazine.

Mark I & VII.357

fig. 15a
Additional Disassembly and Cleaning Instructions for the Return/Recoil Springs Assembly NOTE: Because of the spring tension, be sure to wear safety glasses to prevent possible eye injury. Always work in a clean area to prevent loss of small parts. 1. Disassemble and clean one side at a time. 2. Place the return springs on end with the crossplate down. 3. Pull down on one return/recoil spring and hold down. 4. Pry C-clip from end of spring rod (C-clip is under tension and will fly off if not held under control while moving). 5. Slowly release tension on return/recoil spring and remove. Remove spring rod from crossplate. 6. Clean rod and crossplate of carbon/lead buildup with steel wire brush or steel wool. Soak return/recoil springs in bore solvent and brush with bronze phosphor brush to remove carbon buildup. Spray with cleaner/ degreaser and lubricate. 7. Reassemble by reversing disassembly instructions. 29

In order to maintain accuracy, the barrel must be serviced thoroughly. The slide, the bolt and other moving parts of the pistol must be kept clean and lightly lubricated to ensure proper operation. Care and cleaning includes the magazines, which must be kept free from rust, grit, etc. in order to function properly. At regular intervals, or whenever your pistol has been exposed to sand, dust, extreme humidity, water or other adverse conditions, it must be cleaned and lubricated. Before re-assembling the Desert Eagle, make sure that nothing from the cleaning process is left in the bore. Discharging the pistol with anything in the bore can result in destruction of the firearm and injury or death to you or bystanders. Wipe the exterior of the pistol with powder solvent. Dry the exterior of the Desert Eagle and then apply a thin coat of lubricant to the exterior of the firearm. Use of excess lubricant or grease on your pistol can attract dust or dirt which can interfere with the safe and reliable function of the firearm. Before firing remove all excess lubricant from the bore of the pistol.

CARE AND CLEANING

Periodic Maintenance 1. Field strip the pistol (see page 26) 2. Clean all stripped parts with a lightly oiled soft cloth. 3. Attach the patch holder to the cleaning rod; slip a dry patch into the patch holder and clean the bore. 4. Clean the bore and chamber of the barrel with an oiled patch slipped through the patch holder. 5. Clean the gas cylinder. 6. While cleaning, inspect all parts for wear and damage; make sure the bore and chamber are free from rust. 7. Assemble the pistol (see page 28) and make sure it functions properly. Cleaning prior to firing 1. Field strip the pistol (see page 26). 2. Using the cleaning rod and patch holder, dry the chamber and bore with a clean patch. 3. Make sure that all moving parts are lightly oiled. 4. Assemble the pistol (see page 28) and make sure it functions properly.
Cleaning and firing 1. Field strip the pistol (see page 26). 2. Disassemble the slide (see page 30). 3. Attach the brass wire brush to the cleaning rod, run the brush completely through the chamber and bore until it protrudes completely from the other end. Now pull the wire brush in the opposite direction and remove it from the barrel. Repeat this operation several times. 4. Wipe the cleaning rod dry, remove the wire brush and attach the patch holder. 5. Attach a clean patch and clean the bore; repeat this operation using clean patches until the bore is clean. 6. Oil chamber and bore with a clean oiled patch. 7. Clean the gas cylinder. 8. Oil lightly all other parts of the pistol, reassemble it (see page 28) and make sure it functions properly. NOTE: After firing, use the gas cylinder cleaning tool to remove deposits from gas cylinder underneath the barrel assembly. The cleaning tool should rotate freely from side to side in the gas cylinder when clean. DO NOT use any other tool for this operation since this may damage the cylinder. Make sure gas piston, springs, guides, plates, recoil spring, and channel of frame are free of lead deposits.

TROUBLESHOOTING

Failure to feed - pistol jams or bolt closes on empty chamber. Cause Remedy 1. Magazine improperly Push magazine home to seated engage catch.
2. Magazine improperly filled Remove cartridges and refill. 3. Dirty magazine Disassemble, clean and reassemble. 4. Damaged Magazine Replace. 5. Short recoil Clear jam. Check chamber for cleanliness. Check if return spring is correctly assembled and free of lead deposits. Check type of ammunition (maybe underpowered). 6. Double feed Inspect for stuck case or cartridge (see Pg 38). 7. Incorrect ammunition Change ammunition. 8. Pistol jams shut Release barrel lock; if barrel does not move forward from slide, call service department.
Failure to chamber - Bolt does not close fully and gun will not fire. Cause Remedy 1. Dirty Chamber Clean. 2. Defective ammunition 3. Very dirty pistol Check for damaged cartridges. Check for sluggish bolt. Disassemble, clean, oil and reassemble. Field-strip, inspect, clean or replace if necessary.
Failure to extract or eject - Pistol will not eject case or jams. Cause Remedy 1. Underpowered or Inspect ammunition and defective change if necessary. 2. Dirty or damaged barrel chamber 3. Fouled or broken extractor or extractor spring Inspect, clean, replace barrel in necessary. Clean or replace extractor or extractor spring.
4. Defective or dirty recoil spring
4. Fouled or broken Clean or replace ejector ejector or ejector spring 5. Lead-fouled or broken return spring cross bar Clean or replace. Failure to do so can lead to a broken slide.
Failure to fire - Hammer snaps home but gun will not fire. Cause Remedy 1. Defective cartridge Inspect primer, if indented discard safely. If not indented, inspect firing pin for defects. 2. Obstructed firing pin. Disassemble bolt from slide and inspect firing pin hole for obstructions.
6. Piston and gas cylinder Clean cylinder with tool or recoil spring channel reamer head. Clean piston in frame lead-fouled and channel with wire brush. Spent case stuck in chamber. 1. Field-strip. 2. Insert cleaning rod from muzzle end and tap gently to remove case. 3. If case cannot be removed, contact service department.

PARTS LIST

EXPLODED VIEW Mark VII
Desert Eagle.357 Magnum Pistol Mark I/VII/XIX

VIEW NO.

1 1-A 3-A 7-A 9-A 10 10-A 11 11-A 12 12-A 13 13-A 15-A 17-A 20 20-A 20-B 23 23-A 24 24-A 25* 25-A* 26* 31 32* 43 43-A 44

DESCRIPTION

Barrel 6.357 - MK I/VII Barrel 6.357 - MK XIX Front Sight Gas Piston - MK I/VII Gas Piston - MK XIX Bolt Stabilizer Pin Bolt Stabilizer Spring Bolt Stabilizer Guide Pin Ejector - MK I/VII Ejector - MK XIX Gas Piston Pin - MK I/VII Slide - MK I/VII Slide - MK XIX Ejector Spring - MK I/VII Ejector Spring - MK XIX Extractor Pin - MK I/VII Extractor Pin - MK XIX Ejector Pin - MK I/VII Ejector Pin - MK XIX Extractor - MK I/VII Extractor - MK XIX Extractor Spring Bolt - MK I/VII Bolt - MK XIX Rear Sight Safety Screw - MK I/VII Safety Screw - MK XIX Right Safety Lever - MK VII/XIX Safety Spring Safety - MK I/VII Right Safety - MK XIX (Not Pictured) Left Safety - MK XIX (Not Pictured) Firing Pin Firing Pin Spring Bolt Guide Pin - MK I/VII Bolt Guide Pin - MK XIX Firing Pin Stop - MK I/VII Firing Pin Stop - MK XIX Recoil Spring Assembly - MK I/VII Recoil Spring Assembly - MK XIX Trigger Assembly Barrel Lock Barrel Lock Spring Barrel Lock Pin Hammer Pin Sear Pin Adjustable Trigger Assembly - MK VII/XIX Magazine Catch Frame Magazine Catch Spring Magazine Catch Pin Slide Catch Spring Slide Catch Assembly - MK VII/XIX Magazine Assembly IMI Grip Grip Pin Spring Grip Pin Retaining Ring (C-CLIP) - MK I/VII Retaining Ring (C-CLIP) - MK XIX Left Safety Lever - MK VII/XIX

2010 product catalog

Introducing the redesigned Desert Eagle Pistol
now manufactured by MRi in the u.s.a.
micro desert eagle pistol shipping
Total Order Amount Up to $15.00 $15.01 to $35.00 $35.01 to $50.00 $50.01 to $75.00 $75.01 to $125.00 $125.01 to $175.00 $175.01 to $250.00 $250.01 to $350.00 $350.01 to $450.00 Over $450.00 Standard Delivery $5.99 $7.99 $9.99 $10.99 $12.99 $14.99 $16.99 $18.99 $20.99 $22.99 Express 2nd Day $15.99 $17.99 $19.99 $20.99 $22.99 $24.99 $26.99 $28.99 $30.99 $32.99 Express Next Day $25.99 $27.99 $29.99 $30.99 $32.99 $34.99 $36.99 $38.99 $40.99 $42.99

Contents

Micro Desert Eagle Pistol Desert Eagle Pistols Finishes Magazines Barrels & Component Systems Technical Data Grips, Sights & Holsters MAGNUM LITE Rimfire Rifles Magnums BFR Revolvers MAGNUM LITE Centerfire Rifles Clothing & Specialty items Precision Center Desert Eagle 1911 Pistol Baby Desert Eagle Fast Action Pistol 3 4-10-11 12-13 14-15 16-19 Back Back steel slide
Accurate. reliable. invisible.
gas assist Micro Desert Eagle Pistols
Micro Desert Eagle.380ACP Pistol, 2.22-Inch, Nickel Micro desert eagle.380ACp pistol, 2.22-inch, nickel/blued micro desert eagle.380acp pistol, 2.22-inch, blued ME380 $535.00 me380nb $535.00 me380bl $500.00
Micro Desert Eagle pistol spare Magazines
.380 ACP 6-Round Magazine, Black .380 ACP 6-Round Magazine w/Polymer Finger Extension, Black Polymer Finger Extension Only, Black 5313335 MAG380E MDE-FE $25.00 $35.99 $14.99
Standard delivery is by Fed Ex Ground. We cannot ship Fed Ex to a post office box, only U.S. Mail. Fed Ex Second Day and Next Day are available by request. AK, HI and areas outside the United States will incur express shipping charges. Ammunition can only ship by Fed Ex Ground service (no air, no mail and no
shipments out of the U.S.) and must be signed for by an adult. SALES TAX (MN only) Minnesota Residents: Add 6.875% sales tax to your item total (excluding apparel). Visit us at: www.magnumresearch.com Contact us: through website or at info@magnumresearch.com Prices throughout this catalog are subject to change without notice. Questions? Check our website at www.magnumresearch.com, e-mail us at info@magnumresearch.com, or call us.

how to order

By Phone: Call 1-800-772-6168 or 763-574-1868 Monday-Friday 8:30-4:30 (Central Time) with your Visa, MasterCard or Discover close at hand. By Mail: Send your order to Magnum Research, Inc. 7110 University Avenue N.E., Minneapolis, MN 55432. Include a check, money order, or Visa, MasterCard or Discover card number with its expiration date and 3-digit security code from the back of the card, billing and shipping address (if different), and a daytime phone number. Weighs less than 14 oz.
aluminum alloy frame oversized trigger guard
Micro Desert Eagle Holsters
Discreet inside-the-pant and inside-the-pocket holsters are designed for easy draw. Ultra-thin black laminate blocks perspiration. Inside-the-pocket style has open top for grip-up positioning, but also protects against unintended movement of levers, buttons and catches. Nylon ankle holster offers durable comfort, hook and loop adjustment, nylon web retention strap with reinforced thumb break. All right-hand.

.357 Desert Eagle Mark XIX pistols 6-inch 10-inch
$1,650.00 $1,925.00 $1,925.00 $1,925.00 $1,925.00 $1,925.00 $2,156.00 $2,156.00 $2,156.00 BlacK DE357 Brushed Chrome DE357BC Matte Chrome DE357MC Polished Chrome DE357PC satin nickel DE357sN polished blued DE357pb 24k gold DE357go titanium gold DE357TG Titanium gold w/tiger stripesde357tg-ts $1,563.00 DE35710 $1,838.00 De35710BC $1,838.00 DE35710MC $1,838.00 DE35710PC $1,838.00 DE35710sN $1,838.00 DE35710pb $2,070.00 DE35710go $2,070.00 DE35710TG $2,070.00de35710tg-ts
DE50 DE50BC DE50MC DE50PC DE50sN DE50pb DE50go DE50TG DE50TG-TS $1,563.00 $1,838.00 $1,838.00 $1,838.00 $1,838.00 $1,838.00 $2,070.00 $2,070.00 $2,070.00
DE5010 De5010BC DE5010MC DE5010PC DE5010sN DE5010pb DE5010go DE5010TG DE5010TG-TS $1,650.00 $1,925.00 $1,925.00 $1,925.00 $1,925.00 $1,925.00 $2,156.00 $2,156.00 $2,156.00
Black Brushed Chrome Matte Chrome Polished Chrome satin nickel polished blued 24k gold titanium gold titanium gold with Tiger stripes
Black DE44 black ca approvedde44ca Brushed Chrome DE44BC Brushed Chrome ca approved DE44cabc Matte Chrome DE44MC Polished Chrome DE44PC satin nickel DE44sN DE44pb polished blued 24k gold DE44go titanium gold DE44TG Titanium gold w/tiger stripesde44tg-ts
$1,563.00 DE4410 $1,563.00 n/a $1,838.00 De4410BC $1,838.00 n/a $1,838.00 DE4410MC $1,838.00 DE4410PC $1,838.00 DE4410sN $1,838.00 DE4410pb $2,070.00 DE4410go $2,070.00 DE4410TG $2,070.00de4410tg-ts
Please note: The magazine that comes with your custom-finished Desert Eagle Pistol will have a custom finished base plate and a black oxide body. All firearms must be obtained through your federally licensed firearms dealer. Parts and accessories can be ordered directly from Magnum Research. Any and all specifications are subject to change at the manufacturers sole discretion.
gold appointments. custom components.

Black Black

Made in USA
Desert Eagle Pistol Magazines
Match your extra magazines to your pistol. See below for magazine part numbers pricing and finish options. (Shown at left are the.44 magazines.)

Interchangeable Parts. Exceptional Quality.
desert eagle muzzle brakes
Desert Eagle mark xix muzzle brake for your mark xix.44 or.50AE. 6-inch barrels Require factory installation. call 1-800-772-6168 for shipping details. .44.50AE
Blackdepmb44depmb50 Brushed chromedepmb44bcdepmb50bc matte chromedepmb44mcdepmb50mc polished chromedepmb44pcdepmb50pc bright nickeldepmb44bndepmb50bn satin nickeldepmb44sndepmb50sn polished blueddepmb44pbdepmb50pb 24K Gold Depmb44godepmb50go Titanium golddepmb44tgdepmb50tg * barrel not included $199.00 $264.00 $264.00 $264.00 $264.00 $264.00 $264.00 $297.00 $297.00
The Platform/ The Desert Eagle Pistol
The entire Mark XIX Component System is based on a single platform. With its gas operation, rotating bolt and all-steel construction, this is the heart of the firearm. Once youve purchased a Mark XIX Desert Eagle Pistol, you can change the barrel length or the caliber in seconds, if you have the appropriate Mark XIX components on hand. The Mark XIX Desert Eagle Pistol offers true interchangeability. Six different pistols are available .357 Magnum,.44 Magnum or.50 A.E., each with a 6-inch or 10-inch barrel. Purchase one pistol and you have the platform to build the other five with a simple switch of components (barrel, magazine and sometimes bolt assembly).

Technical Data

General Features The Desert Eagle Pistol is a gas-operated, semi-automatic pistol with a rotating four lug bolt for positive lock-up. The barrel is locked in place, assuring a high degree of accuracy. The polygonal rifling reduces barrel wear, is easy to clean and very accurate. Anatomically formed grip, ideal hand seating angle and comfortable grip dimensions permit rapid, accurate, instinctive shooting. The Desert Eagle is designed for two-handed shooting. The Desert Eagle Pistol fires standard factory ammunition. DEPs have an automatic slide lock that holds the slide open after the last shot is fired. The 7/8 dovetail rib on the barrel has cross slots to accommodate scope rings (available as an option). Safety The safety is ambidextrous it can be operated by right-handed and left-handed shooters. When the safety is on, the firing pin is blocked, disconnecting the trigger bar from the sear at the same time. Extensive testing has shown the Desert Eagle is safe from accidental firing with safety engaged. Construction Desert Eagle Pistol parts are machined or precision-cast and machined to strict military standards from high-quality steel.
desert eagle pistol barrels
Desert Eagle 6-inch Mark XIX Spare Barrels.50AE.44.357
$392.00 $478.00 $478.00 $478.00 $478.00 $478.00 $478.00 $528.00 $528.00 Blackbar506 Brushed chromebar506bc matte chromebar506MC polished chromebar506pC bright nickelbar506bn satin nickelbar506sn polished bluedbar506pb 24k goldbar506go Titanium goldbar506tg Bar446 BAR3576 Bar446bcbar3576bc Bar446mcbar3576mc Bar446pcbar3576pc Bar446bnbar3576bn Bar446snbar3576sn Bar446pbbar3576pb Bar446gobar3576go Bar446tgbar3576tg

Desert Eagle 10-inch Mark XIX Spare Barrels
$478.00 $564.00 $564.00 $564.00 $564.00 $564.00 $564.00 $616.00 $616.00
Blackbar5010 Brushed chromebar5010bc matte chromebar5010MC polished chromebar5010pC bright nickelbar5010bn satin nickelbar5010sn polished bluedbar5010pb 24k goldbar5010go Titanium goldbar5010tg
Bar4410 BAR35710 Bar4410bcbar35710bc Bar4410mcbar35710mc Bar4410pcbar35710pc Bar4410bnbar35710bn Bar4410snbar35710sn Bar4410pbbar35710pb Bar4410gobar35710go Bar4410tgbar35710tg
Mark XIX Component System Package
Acquire a complete Desert Eagle collection. This stunning package consists of an aluminum carrying case (jacketed in black ballistic nylon) filled with the following components of the Mark XIX system:.44 Magnum pistol with magazine,.44 Magnum 10-inch barrel,.50 A.E. 6-inch barrel,.50 A.E. 10-inch barrel,.50 A.E. magazine,.357 Magnum 6-inch barrel,.357 Magnum 10-inch barrel,.357 bolt assembly and.357 magazine. You can also order the package with only 6-inch barrels or only 10-inch barrels. Components may vary depending on the starting pistol caliber. These packages and all firearms must be obtained through your federally licensed firearms dealer.
Desert Eagle Mark XIX Component Systems
Mark XIX Desert Eagle Pistol Specifications
Length, with 6-inch (152 mm) barrel Length, with 10-inch (254 mm) barrel Height Width Trigger reach Sight radius (with 6-inch barrel) Weight w/empty magazine Polygonal rifling (right-hand twist) Magazine capacity Bore diameter

.357 MAGNUM

10.75 inches (27.3 cm) 14.75 inches (37.5 cm) 6.25 inches (15.9 cm) 1.25 inches (32 mm) 2.75 inches (70 mm) 8.5 inches (215 mm) 4 lbs., 8.4 oz. 1 turn in 14 inches (355 mm) 9 rounds.357 (9.1 mm)

.44 MAGNUM

10.75 inches (27.3 cm) 14.75 inches (37.5 cm) 6.25 inches (15.9 cm) 1.25 inches (32 mm) 2.75 inches (70 mm) 8.5 inches (215 mm) 4 lbs., 6.6 oz. 1 turn in 18 inches (457 mm) 8 rounds.429 (10.9 mm)

.50 A.E.

10.75 inches (27.3 cm) 14.75 inches (37.5 cm) 6.25 inches (15.9 cm) 1.25 inches (32 mm) 2.75 inches (70 mm) 8.3 inches (215 mm) 4 lbs., 5.8 oz. 1 turn in 19 inches (48.3 cm) 7 rounds.495 (12.6 mm)

6-inch only

10-inch only

6-inch and 10-inch

$4,402.00 $5,140.00 $5,140.00 $5,140.00 $5,140.00 $5,140.00 $5,140.00 $5,651.00 $5,651.00
blackdexix6 Brushed Chrome Dexix6BC matte chromedexix6mc polished chromedexix6pc bright nickeldexix6bn satin nickeldexix6sn polished blued dexix6pb 24k golddexix6go titanium golddexix6tg
$2,910.00dexix10 $3,388.00 Dexix10BC $3,388.00 Dexix10mC $3,388.00 Dexix10pC $3,388.00 Dexix10bn $3,388.00 Dexix10sn $3,388.00 Dexix10pb $3,747.00 Dexix10go $3,747.00 Dexix10tg
$3,172.00dexix $3,649.00 DexixBc $3,649.00 Dexixmc $3,649.00 Dexixpc $3,649.00 Dexixbn $3,649.00 Dexixsn $3,649.00 Dexixpb $4,008.00 Dexixgo $4,008.00 Dexixtg
Practical Accessories. Exclusive Upgrades.

Hogue Rubber Grips

New Desert Eagle.44 magnum.240 grain JHP/XTP ammunition. Each box contains 20-rounds of ammunition.
.44 magnum 240-grain jhp/xtp dep44hp/xtp240 $23.99

.44 Ammunition

Leather Hip Holster

Cordura Hip Holster

Affordable, practical, black Cordura hip holster custom-built to fit any Desert Eagle Pistol with a 6-inch barrel. Complete the set with the matching double magazine pouch and nylon web belt. If you are right-handed, order right-hand holster. If you are left-handed, order left-hand holster.
Hip holster, right-hand Hip holster, left-hand Double magazine pouch Nylon web belt, medium (to 36 waist) Nylon web belt, large (to 42 waist) DEP270B/R DEP271B/L DEP280 DEP275B DEP276B $31.99 $31.99 $31.99 $32.99 $32.99
Black leather, suede-lined holsters are perfect for Desert Eagles with or without scopes, with any sights, or with scopes and sights. Shortest holster holds any caliber Mark XIX pistol with 6-inch barrel. Longer holster holds any caliber, any vintage, with a 10-inch barrel. Matching single leather magazine pouch also available.
Hip holster, 6 barrel, right-hand (Mark XIX only) Hip holster, 10 barrel, right-hand (Mark I, VII, XIX) Leather single magazine pouch, black DEP2540 DEP2541 DEP2513 $99.99 $99.99 $43.99
Soft synthetic rubber grips have cobblestoned texture for secure hold. One-piece (DEP821) with finger grooves, on right, and two-piece (DEP820) no finger grooves, on left, retrofit Mark I, VII and XIX. Both styles field-installable. Made exclusively for the Desert Eagle by Hogue Grips.
Hogue rubber grips, 2-piece Hogue rubber grips, 1-piece w/finger grooves DEP820 DEP821 $49.99 $49.99

.50AE Ammunition

Exotic Grips
If you have a hard time finding rounds for your.50 AE locally, call us. We usually have some in stock. Each box contains 20 rounds of ammunition. See performance data below.
one box MRI 350-grain, JSP one box MRI 300-grain, jHP one box MRI 300-grain, JHP/XTP DEP50JSP350B DEP50JHP300B DEP50HP/XTP300 $33.99 $33.99 $33.99

Leather Shoulder Holster

Cordura Bandolier Holster
Expertly crafted grips from Hogue are field-installable no drilling or tapping required. Pau ferro wood resembles fancy dark walnut. (Note: install carefullydo not overtighten screws.) New anodized black aluminum Grim Reaper engraved grips and anodized black aluminum The Bone Yard engraved grips (see website for more detail). Made exclusively for the Desert Eagle by Hogue Grips.
hogue pau ferro grips, 2-piece Desert eagle grim reaper black grips Desert eagle the bone yard black grips DEP815 Dep817 dep818 $91.99 $129.99 $129.99

.50 Action Express Performance Data in the Desert Eagle Pistol from Magnum Research, Inc. Ammunition 6 Inch Barrel 10 Inch Barrel
MuzzleMuzzleMuzzleMuzzle VelocityEnergy VelocityEnergy ft/sec ft. lbs. ft/sec ft. lbs. 1575 1653
Custom-crafted in the U.S.A. of top-quality cowhide by Gould & Goodrich for any Desert Eagle Pistol with a 6-inch barrel. Lined. Choose natural or black. Double magazine pouch matches and attaches.
Leather shoulder holster, natural, right-hand Leather double magazine pouch, natural Leather shoulder holster, black, right-hand Leather double magazine pouch, black DEP2511 DEP2524 DEP2512 DEP2525 $139.99 $52.99 $139.99 $52.99
Custom-manufactured for scoped Desert Eagles in all calibers. For right-handed use with pistols that have 6-inch or 10-inch barrels. Our standard double magazine pouch and nylon web belt match all our Cordura holsters.
Bandolier holster for scoped DEP, 6 barrel Bandolier holster for scoped DEP, 10 barrel Double magazine pouch Nylon web belt, medium (to 36 waist) Nylon web belt, large (to 42 waist) DEP266B DEP268B DEP280 DEP275B DEP276B $78.99 $78.99 $31.99 $32.99 $32.99
Make Bullet Weight and Type Magnum Research 300 grain JHP Magnum Research 350 grain JSP Speer Gold Dot 325 grain UCHP Hornady 300 grain HP/XTP
Leather Hip Holster w/Thumb Break
Cordura Tactical Thigh Holster

Desert Eagle Sights

Low-profile Millett sights with white or orange front ramp and white rear sight are adjustable for windage and elevation. Trijicon night sights, 3-dot green front/rear: the brightest, strongest and safest for enhancing night fire accuracy. Sights work in sets (not individually) on all Desert Eagle models. Front sights are also available separately for your extra barrels. New HiViz fiber-optic front sight is ideal for low-light conditions or dark targets like a wild hog or black bear. Each comes with 3 green and 3 red LitePipes. Available for 6-inch or 10-inch barrels. An alternative to the Desert Eagle factory front sight. For all Desert Eagle sights, some fitting is required. Consultation with your gunsmith is suggested. Magnum Research does not warranty sights not installed by a MRI factory gunsmith.
Millett sights, white front, white rear Millett sights, orange front, white rear Millett front sight, white Millett front sight, orange Millett rear sight, white Trijicon night sights, green 3-dot Trijicon front sight, green hi-viz Fiber optic front sight, short (for 6" barrels) hi-viz fiber optic front sight, high (for 10" barrels) Factory combat front sight, black (6) Factory combat rear sight, black Installation of sights at MRI (optional) DEP300/W DEP300/O DEP301/W DEP301/O DEP302/W DEP320 DEP321 DEP-Hiviz-s dep-hiviz-h WSI $75.99 $75.99 $29.99 $29.99 $50.99 $129.99 $50.99 $25.99 $25.99 $20.99 $25.99 $65.99

Instrumental velocities at 15 feet: readings taken used production pistols. Key to Abbreviations: JHP - jacketed hollow point, JSP - jacketed soft point, UCHP - Uni-Cor hollow point, HP/XTP - hollow point extreme penetration.
Ring Mounts for Mark XIX Pistols
Right-handed holster with thumb break. Holds any Desert Eagle Pistol with a 6-inch barrel. Choose black or natural. Lined. Matching single leather magazine pouch also available.
Leather hip holster, black Leather single magazine pouch, black Leather hip holster, natural Leather single magazine pouch, natural DEP2504 DEP2513 DEP2502 DEP2516 $79.99 $43.99 $79.99 $43.99
Black Cordura SAS-style thigh holster holds any Desert Eagle pistol with a 6-inch barrel. Matching double magazine pouch holds magazines for all calibers. Black nylon web belt complements all of our Cordura holsters and magazine pouches.
Thigh holster, right-hand Double magazine pouch Nylon web belt, medium (to 36 waist) Nylon web belt, large (to 42 waist) DEP273B/R DEP280 DEP275B DEP276B $78.99 $31.99 $32.99 $32.99
Specially designed 1-inch see-through ring mounts let you continue to use your fixed sights, too. Rear ring is angled back to prevent scope from being affected by muzzle blast. These rings fit all Mark XIX pistols; no other scope mounts are required if using scopes without an integral base.
Ring mounts, 1-inch, black Ring mounts, 1-inch, matte silver DEP380 DEP380S $29.99 $29.99

Cordura Shoulder Holster

Cordura Tactical Hip Holster
By your request! Designed to hold any 6-inch Desert Eagle pistol with a frame-mounted laser, this tactical hip holster adjusts at several points to fit your shooting style. Nylon web belt coordinates.
Tactical hip holster, right-hand Nylon web belt, medium (to 36 waist) Nylon web belt, large (to 42 waist) DEP272B/R DEP275B DEP276B $97.99 $32.99 $32.99
Scope Mount for Mark XIX Pistols
These mounts (shown above) attach directly to the top of your Mark XIX barrel and will give you a wider variety of scope mounting possibilities. One of these mounts would be required if you are looking to use scopes with integral bases.
Scope mount XIX, black Scope mount XIX, silver DEP351B DEP351S $89.99 $89.99
Discreet black shoulder holster holds any Desert Eagle Pistol a with 6-inch barrel. Matching double magazine pouch and nylon web belt complete the rig. If you are right-handed, order right-hand holster. If you are left-handed, order left- hand holster.

Shoulder holster, right-hand Shoulder holster, left-hand Double magazine pouch Nylon web belt, medium (to 36 waist) Nylon web belt, large (to 42 waist) DEP260B/R DEP261B/L DEP280 DEP275B DEP276B $54.99 $54.99 $31.99 $32.99 $32.99
If you have any questions regarding mounting, sights, or holster fitting please contact our Customer Service Department at 1-800-772-6168, Monday-Friday 8:30-4:30 CST.

rimfire rifles

.17 Mach-2.22 LR.22 WMR
Accurate. Innovative. Affordable.

Accessories

For MAGNUM LITE MLR-1722.22 LR and.17 Mach-2
MAGNUM LITE Graphite.22WMR Hogue OverMolded Rifle MLR22WMH $791.00 Nutmeg Laminate MLSN $219.00
MAGNUM LITE.17 Mach-2 Tactical Rifle MLR17M2TB $665.00
MAGNUM LITE.22LR Tactical Rifle MLR22TB
$665.00 MAGNUM LITE Graphite.22WMR Barracuda Forest Camo Rifle MLR22WMBFC $935.00 Forest Camo MLSFC $219.00
MAGNUM LITE.17 Mach-2 Hogue OverMolded Rifle MLR17M2H $665.00
MAGNUM LITE.22LR Hogue OverMolded Rifle MLR22H $665.00
Peppper Laminate MAGNUM LITE Graphite.22WMR Barracuda Nutmeg Rifle MLR22WMBN $935.00

MLSP

$219.00
Hogue OverMolded Stock AHOG920

$85.00

For MAGNUM LITE MLR-1722M.22WMR
MAGNUM LITE.17 Mach-2 Barracuda Forest Camo Rifle MLR17M2BFC $819.00
MAGNUM LITE.22LR Barracuda Forest Camo Rifle MLR22BFC $819.00
MAGNUM LITE Graphite.22WMR Barracuda Pepper Rifle MLR22WMBP $935.00

Nutmeg Laminate

MLSWMN $219.00
Forest Camo MAGNUM LITE.17 Mach-2 Barracuda Nutmeg Rifle MLR17M2BN $819.00 MAGNUM LITE.22LR Barracuda Nutmeg Rifle MLR22BN $819.00 MAGNUM LITE Stainless Steel Barrel.22WMR Hogue OverMolded Rifle MLRS22WMH $727.00 Peppper Laminate MAGNUM LITE Stainless Steel Barrel.22WMR Barracuda Forest Camo Rifle MLRS22WMBFC $906.00

MLSWMFC $219.00

MLSWMP
MAGNUM LITE.17 Mach-2 Barracuda Pepper Rifle MLR17M2BP $819.00
MAGNUM LITE.22LR Barracuda Pepper Rifle MLR22BP $819.00
Hogue OverMolded Stock AHOG920WM $85.00
Receiver: Machined 6061-T6 aluminum (aircraft aluminum). 3x stronger than Cast 380 aluminum. Anodized finish is hard and durable. Consistent machining results in consistent accuracy. Bolt: CNC-machined, through-hardened 4140 steel. Consistent dimensions for consistent performance. Minimum-depth bolt face (.043) maximizes accuracy. Barrel: 18-inch straight bull barrel made from 4140 steel. Benz chamber and 11-degree crown. Tapered throat area aligns bullet perfectly with the bore to maximize accuracy. Firing Pin: Inertia firing pin. Inertia system is preferred for the most accurate firearms.

Cordura Holster

Black Cordura hip holsters are rugged and affordable. Nylon web belt matches holster.
Cordura hip holster, right-hand, for 6.5 and 7.5, all calibers Cordura hip holster, right-hand, for 10, all calibers Nylon web belt, medium (to 36 waist) Nylon web belt, large (to 42 waist) BFR270B/R $31.99 BFR270B/R-10 $31.99 DEP275B $32.99 DEP276B $32.99
7.5" BFR SC with MRI Mount 5" BFR.44 Magnum 10" BFR LC with optional Scope 7.5" BFR 45LC410 with optional Vent Rib
Hogue Pau Ferro wood grip BFR815 Hogue Black Micarta grip (must be fitted) BFR817 hogue white polymer grip (must be fitted) bfr818

$75.99 $159.99 $159.99

Scope Mounts

Biggest, Finest Models

Caliber Barrel Length .30/30 Win 10.444 Marlin 10 NEW!.44 magnum 5.45 LC/.410 7.5 5.25 NEW!.45 LC/.410.450 Marlin 10.454 Casull 6.5.454 Casull 7.5.45/70 Govt 7.5 45/70 Govt 10.460 S&W 7.5.460 S&W 10.480 Ruger/.475 Linebaugh 6.5.480 Ruger/.475 Linebaugh 7.5.50 AE 6.5.50 AE 7.5.500 S&W 7.5.500 S&W 10 Bore Dia. (inches) 300.424.424.442.442.450.442.442.450.450.442.442.465.465.492.492.492.492 Groove Dia. (Inches).308.430.430.451.451.458.451.451.458.458.451.451.475.475.500.500.500.500 Twist Rate 1 in in in in in in in in in in in in in in 15 1 in in in in 15 Part Number BFR30/30 BFR444M bfr44mag5 BFR45LC/410 bfr45lc/4105 BFR450M BFR454C BFR454C7 BFR45/707 BFR45/70 BFR460SW7 BFR460SW10 BFR480/475 BFR4807/4757 BFR50AE6 BFR50AE7 BFR500SW7 BFR500SW10
$1050.00 Suggested MSRP All Models
Biggest, Finest Specifications
Long Cylinder Calibers:.45/70 Govt,.444 Marlin,.45 Long Colt/.410,.450 Marlin,.460 S&W, .500 S&W,.30/30 Overall Length: 15 (7.5 barrel) or 17.5 (10) Approximate Weight: 4 lbs. (7.5 barrel) or 4.36 lbs. (10) The.410 shot shell / slug cartridge is not compatible with the.45/70 caliber revolvers. The.45LC/.410 caliber has modified choke and wrench included. The.410 will accept 3 inch shotgun shells. Short Cylinder Calibers:.454 Casull,.44 Magnum,.480 Ruger/.475 Linebaugh,.50 AE Overall Length: 12.75 (6.5 barrel) or 13.75 (7.5) or 16.25 (10) Approx. Weight: 3.2 lbs. (6.5 barrel) or 3.5 lbs. (7.5) or 4.36 lbs. (10) All Calibers Height: 6 Width: 1.75 Trigger Pull: 34 lbs. Sights: Factory-adjustable rear, black front Number of shots: 5 Finish: Brushed stainless steel construction Barrels are stress-relieved and cut rifled. Legal for Sale in California pursuant to Sec. 12133 of SB15, except.45LC/.410.
Natural Leather Bandolier Holster
BFR silver scope mount for use with Weaver style rings is made of 6061-T6 aircraft grade aluminum, features rear recoil lug and multiple cross slots to optimize scope mounting. All BFRs (except 45LC/410) are drilled and tapped to accept BFR mount (included with BFRs sold after 1/1/04).

Accurate. admired. awesome.
MOUNTAIN EAGLE MAGNUM LITE GRAPHITE CENTER-FIRE RIFLES AND BARRELS
Remington long action with 26 bull barrel and H-S Precision stock
MAGNUM LITE rifles with MAGNUM LITE barrels are crafted to provide the ultimate in performance for the discriminating rifle enthusiast. Reduced weight and superior accuracy are the result of patented design, in which uni-directional graphite fibers run parallel to the bore axis over a match-grade steel liner. Complete rifles from Magnums Custom Shop are based on the Remington 700 receiver and are stocked to fit your requirements. Choose a stock from H-S Precision or Hogue.
$2,173.00 $2,173.00 $2,173.00 $2,173.00
MLR3006B26 MLR280B26 MLR7MMB26 MLR300WIB26 MLR3006ST24 MLR280ST24 MLR7MMST24 MLR300WIST24
Remington long action with 24 sport taper barrel and H-S Precision stock
.30-06 Magnum Lite Graphite Rifle .280 Magnum Lite Graphite Rifle 7mm Magnum Lite Graphite Rifle .300WM Magnum Lite Graphite Rifle
.30-06 Magnum Lite Graphite Rifle .280 Magnum Lite Graphite Rifle 7mm Magnum Lite Graphite Rifle .300WM Magnum Lite Graphite Rifle
$2,173.00 $2,173.00 $2,173.00 $2,173.00
Remington short action with 24 sport taper barrel and Hogue OverMolded stock
.308 Winchester Magnum Lite Graphite Rifle .300 WSM Magnum Lite Graphite Rifle 7mm WSM Magnum Lite Graphite Rifle $2,173.00 $2,173.00 $2,173.00
MAGNUM LITE sport taper barrel with H-S Precision varmint stock
MLRH308ST24 MLRH300WSMST24 MLRH7WSMST24 MLR3006ST26 MLR280ST26 MLR7MMST26 MLR300WIST26
Remington long action with 26 sport taper barrel and H-S Precision stock
.30-06 Magnum Lite Graphite Rifle .280 Magnum Lite Graphite Rifle 7mm Magnum Lite Graphite Rifle .300WM Magnum Lite Graphite Rifle
MAGNUM LITE bull barrel with H-S Precision tactical stock
Remington short action with 26 sport taper barrel and Hogue OverMolded stock
.308 Winchester Magnum Lite Graphite Rifle .300 WSM Magnum Lite Graphite Rifle 7mm WSM Magnum Lite Graphite Rifle $2,173.00 $2,173.00 $2,173.00
MLRH308ST26 MLRH300WSMST26 MLRH7WSMST26 MLRT22250 MLRT300WI MLRT300WSM MLRT308 MLRT223
MAGNUM LITE sport taper barrel with Hogue OverMolded stock
MAGNUM LITE CENTER-FIRE SPECIFICATIONS

Varmint

Length of Pull Overall Length Weight, Empty* Right Hand Only 13 3/46 1/lbs. 6 oz.

Tactical

Length of Pull** 13 1/4-15 1/4 Overall Length 1/4 Overall Length 48 1/4 Weight, Empty* 9 lbs. 2 oz. Right Hand Only
Length of Pull Overall Length Overall Length Weight, Empty* Right Hand Only 13 3/44 1/46 1/lbs. 2 oz.

*Weights will vary 2-4 ounces depending on caliber. **Length of pull on the tactical rifle is adjustable.
$2,475.00 .22/250 Tactical Magnum Lite Graphite Rifle $2,475.00 .300WM Tactical Magnum Lite Graphite Rifle $2,475.00 .300WSM Tactical Magnum Lite Graphite Rifle $2,475.00 .308 Tactical Magnum Lite Graphite Rifle $2,475.00 .223 Tactical Magnum Lite Graphite Rifle Remington short action with 26 bull barrel and H-S Precision stock $2,173.00 MLRV22250.22/250 Varmint Magnum Lite Graphite Rifle $2,173.00 MLRV223.223 Varmint Magnum Lite Graphite Rifle MAGNUM LITE GRAPHITE CENTER-FIRE BARRELS $599.00 mlb24b30 Magnum lite 24" graphite bull barrel,.30 caliber (1 in 10) $599.00 mlb26b244-9 Magnum lite 26" graphite bull barrel,.224 caliber (1 in 9) $599.00 mlb26b244-12 Magnum lite 26" graphite bull barrel,.224 caliber (1 in 12) $599.00 mlb26b244-14 Magnum lite 26" graphite bull barrel,.224 caliber (1 in 14) $599.00 mlb26b243 Magnum lite 26" graphite bull barrel,.243 caliber (1 in 10) $599.00 mlb26b257 Magnum lite 26" graphite bull barrel,.257 caliber (1 in9) $599.00 mlb26b30 Magnum lite 26" graphite bull barrel,.30 caliber (1 in 10) $599.00 mlb26b7 Magnum lite 26" graphite bull barrel, 7mm/,284 (1 in 9) $599.00 mlb24st243 Magnum lite 24" graphite sport taper barrel,.243 caliber (1 in 10) $599.00 mlb24st270 Magnum lite 24" graphite sport taper barrel,.270 caliber 1 in 10) $599.00 mlb24st30 Magnum lite 24" graphite sport taper barrel,.30 caliber (1 in 10) $599.00 mlb24st338 Magnum lite 24" graphite sport taper barrel,.338 caliber (1 in 10) $599.00 mlb24st7 Magnum lite 24" graphite sport taper barrel, 7mm/.284 (1 in 9) $599.00 mlb26st243 Magnum lite 26" graphite sport taper barrel,.243 caliber (1 in 10) $599.00 mlb26st270 Magnum lite 26 graphite sport taper barrel,.270 caliber 1 in 10) $599.00 mlb26st30 Magnum lite 26 graphite sport taper barrel,.30 caliber (1 in 10) $599.00 mlb26st338 Magnum lite 26 graphite sport taper barrel,.338 caliber (1 in 10) $599.00 mlb26st7 Magnum lite 26 graphite sport taper barrel, 7mm/.284 (1 in 9)
Remington short action with 26 bull barrel and H-S Precision tactical stock
Clothing & specialty items
Desert Eagle 3-D & BFR T-Shirts and Jacket

precision center

Trigger assembly with trigger stop, black finish, fits into a DEP of any generation. Eliminates overtravel to enhance accuracy. Adjustable. For sheer good looks, replace your standard bolt assembly with one that has a beautifully jeweled finish. Install either assembly yourself. Trigger assembly with trigger stop 00024-1340TS $95.00 Jeweled bolt assembly for.357 mark xix DEP BOLT357JEWL $277.00 Jeweled bolt assembly for.44/50 mark xix.50 DEP BOLT4450JEWL $277.00
Designed by Ken Onion, these knives feature a 3-inch 440A stainless steel blade and 4-inch 410 stainless body. Pocket clip, safety lock, Speed Safe assisted opening, and our Magnum Research eagle logo.
Desert Eagle knife, silver Desert Eagle knife, matte black finish DEP391 DEP392 $59.00 $79.00
The Custom shop will quote any job that doesnt damage the integrity or performance of the finished revolver. Barrel band front sights, swivel studs, lightweight guns, special crowns, your company LOGO, etc.
For any Precision Center questions, please contact the Precision Center at 1-800-772-6168 or 763-574-1868. 19
desert eagle 1911 pistols and accessories
Desert Eagle 1911 Pistols

de1911g De1911c

baby desert eagle fast action pistols and accessories NEW!
Baby Desert Eagle Fast Action Pistols
befa915f befa910f Befa4012f Befa4010f 9mm 15-Round Pistol, 4-inch barrel, full-size black polymer 9mm 10-round pistol, 4-inch barrel, full-size black polymer.40s&w 12-round pistol, 4.15-inch barrel, full-size black polymer.40s&w 10-round pistol, 4.15-inch barrel, full-size black polymer $699.00 $699.00 $699.00 $699.00

$799.00 $799.00

.45acp pistol, 5-inch barrel, black.45ACp pistol, 4.33 inch barrel, black
Desert Eagle 1911 Spare Magazine &.22LR Conversion Kit
mag1911-458 dep1911-22ck mag1911-2210.45ACP 8-Round Magazine, black.22lr conversion kit for de1911g.22lr 10-round magazine, black for dep1911g $29.99 $349.99 $29.99
Baby Desert Eagle Fast Action Spare Magazines
magfa915 magfa910 magfa4012 magfa4010 9mm 15-round magazine, black 9mm 10-round magazine, black.40s&w 12-round magazine, black.40s&w 10-round magazine, black $31.00 $31.00 $31.00 $31.00