Datasheet

PoE Splitter

TL-POE10R

Cost Saving, no power cabling for Ethernet network device
Adjustable 5VDC9VDC or 12VDC output power with slide switch
High Safety with Short Circuit Protection and over Voltage Protection

Description

TP-LINKS PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard. It can receive power and data from all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Injector, such as TP-LINKs TL-SF1008P, TL-POE150S or other equivalent products, then split electric power and data into two cables, so you can install the non-PoE devices like Wireless Access Points, IP Cameras or IP Phones, in remote location where there are no power lines or outlets, where you wish to fix these devices.

www.tp-link.com

Specifications
TL-POE10R Ports PoE Splitter 1 10/100M Auto-Negotiation RJ45 PoE port (POWER+DATA IN) 1 10/100M Auto-Negotiation RJ45 LAN port (LAN OUT) 1 power socket (DC OUT) Standards IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3af Power over Ethernet 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) Network Media EIA/TIA-STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-STP (maximum 100m) Auto-Sensing Algorithm enables taking power from 802.3af PSE Basic Function Adjustable 5VDC9VDC or 12VDC power supply Plug-and-Play Power Adjustable output 5VDC/2A9VDC/1A or 12VDC/1A Supplies up to 11.5W at 10W at 5VDC,9W at 9VDC or 12W at 12VDC Power Consumption LED Indicator Safety & Emission Dimensions (W*D*H) Operating Temperature Storage Temperature Operating Humidity Storage Humidity PWR (Green) FCC, CE 3.2*2.0*0.9 in.(81*52*24 mm) 0C~40C (32F~104F) -40C~70C (-40F~158F) 10%~90% non-condensing 5%~90% non-condensing

Features

Complies with IEEE802.3af standard Cost Saving, no power cabling for Ethernet network device Advanced Auto-Sensing Algorithm enables taking power from 802.3af PSE Adjustable 5VDC9VDC or 12VDC output with slide switch Supplies up to10W at 5VDC,9W at 9VDC or 12W at 12VDC High Safety with Short Circuit Protection Supports power detection and classification Auto disconnection for over voltage, under voltage or over current Plug & Play installation, requires no configuration

Diagram:

Data & Power (RJ45 Cable) Power Only Data Only (RJ45 Cable) Power (Power Cable) Data

Package:

TL-POE10R PoE Splitter One Ethernet (CAT.5 UTP) Cable One Power Cable User Guide

Data & Power

DC Power
8-Port 10/100Mbps PoE Switch

TL-SF1008P

150Mbps Wireless N Access Point

TL-WA701ND

Power outlet

PoE Injector

TL-POE150S
10/100Mbps Desktop Switch

TL-SF1008D

Data Data & Power DC Power
Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specificationsmay be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd.
Copyright 2011 TP-LINK Technologies Co., Ltd. All rights reserved.

PoE Splitter

http://www.tplink.com/products/print.asp?pmodel=TL-POE10R

Print Spotlight:

IEEE 802.3af compliant Adjustable output power Plug-and-Play installation

Product Description:

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINKs TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

Product Features:

IEEE 802.3af compliant Delivers power up to 100 meters Optional 12V DC or 5V DC power supply Plug-and-Play, requires no configuration

Product Specifications:

Standards and Protocols
IEEE 802.3, 802.3u, 802.3af CSMA/CD, TCP/IP Compatible with IEEE 802.3af compliant PSEs Delivers power up to 100 meters
Basic Function Optional 12VDC or 5VDC power supply Plug-and-Play 1 10/100M Auto-Negotiation RJ45 port (Auto MDI/MDIX)

LAN Port

2011.02.16. 18:28

PoE Port

1 10/100M Auto-Negotiation RJ45 port (Auto MDI/MDIX) 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

Network Media

EIA/TIA-568 100

STP (maximum 100m)

100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-STP (maximum 100m)
LED Indicator Safety & Emission Dimensions (W*D*H)
PWR FCC, CE 3.2*2.0*0.9 in.(81*52*24 mm) Operating Temperature: 0~40 (32~104)

Environment

Storage Temperature: -40~70 (-40~158) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Power Output

12W (12VDC) or 11.5W (5VDC)