PDP-TELEVISION (PLASMA DISPLAY PANEL)

Owners Instructions

Before operating the unit, please read this manual thoroughly, and retain it for future reference.
ON-SCREEN MENUS Picture In Picture (PIP) Energy Saving TELETEXT (Option) SRS TruSurround XT Digital Natural Image engine
Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. Model _______________ Serial No. _______________
BN68-01171A-03Eng_0319.indd

2007-03-19

3:39:39

User Instructions

Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product. The product is making a cracking noise. A cracking noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit. Cell Defects The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. Avoid operating the TV at temperatures below 5C(41F) A still image displayed too long may cause permanent damage to the PDP Panel. Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Afterimage on the Screen. Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the brightness and contrast when displaying still images. Warranty - Warranty does not cover any damage caused by image retention. - Burn-in is not covered by the warranty. Installation Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may cause a serious damage to your set. Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.
2007 Samsung Electronics Co., Ltd. All rights reserved.

English - 6

3:39:48
1 POWER IN Connect the supplied power cord. 2 Connecting external Audio Devices Connect RCA audio signals from the TV to an external source, such as Audio equipment. 3 EXT 1, EXT 2 Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. Input/Output Specification
Connector EXT 1 EXT 2 Input Output Video Audio(L/R) RGB Video + Audio(L/R) Only TV or DTV output is available. Output you can choose.
4 COMPONENT IN Audio (AUDIO L/R) and video (Y/PB/PR) inputs for Component. 5 DIGITAL AUDIO OUT (OPTICAL) Connect to a Digital Audio Component. 6 SERVICE Connector for service. Connect the serial jack between the electro-motion wall mount bracket and your TV when you want to adjust the TV viewing angle using your remote control. 7 PC IN / AUDIO Connect to the video and audio output jack on your PC. 8 COMMON INTERFACE Slot Insert CI (Common Interface) card into the slot. (refer to page 46) When not inserting CI CARD in some channels, Scramble Signal is displayed on the screen. The pairing information containing a telephone number, CI CARD ID, Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. When the channel information configuration has finished, the message Updating Completed is displayed, indicating that the channel list is now updated. Insert the CI-Card in the direction marked on it.
9 HDMI IN 1, HDMI IN 2 Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC) When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture. Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed) DVI IN (HDMI 2) AUDIO L/R DVI audio outputs for external devices. 0 ANT IN 75 Coaxial connector for Aerial/Cable Network. Supported modes for HDMI and Component
HDMI/DVI 50Hz HDMI/DVI 60Hz Component 480i 480p 576i 576p 720p 1080i X X X O O O X O X X O O O O O O O O

English - 7

3:39:49
Viewing the Remote Control (PS42Q96HD/PS42Q97HD/PS50Q96HD/PS50Q97HD)

This is a special remote control for the visually impaired persons, and has Braille points on the Power, Channel, Volume, STOP, and PLAY/PAUSE buttons. The performance of the remote control may be affected by bright light. h Picture-In-Picture On/Off i Picture effect selection (Refer to page 19) j Digital subtitle display k Picture freeze l If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again. Teletext Functions (Refer to page 51) 5 Exit from the teletext display (depending on the model) 8 Teletext index 0 Fastext topic selection ! Teletext display/mix both teletext information and the normal broadcast @ Teletext size * Teletext mode selection (LIST/FLOF) ( Teletext sub page c P :Teletext next page P :Teletext previous page d Teletext cancel f Teletext reveal h Teletext hold i Teletext store
1 POWER button (turns the TV on and off) 2 Number buttons for direct channel access 3 One/Two-digit channel selection 4 Channel control button (Refer to page 16) 5 Selects the TV and DTV mode directly 6 Volume increase Volume decrease 7 Temporary sound switch-off 8 Displays the main on-screen menu 9 Returns to the previous menu @ Picture size selection # Electronic Program Guide (EPG) display $ Sound mode selection % Remote control setup ^ Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) & Press to backlight the VOL, CH, and the active source button (TV, DVD, CABLE, STB, VCR) on the remote. * Available source selection ( Previous channel ) DTV menu display a Records for Live Broadcasting b VCR/DVD Function (Rewind, Stop, Play/Pause, Fast/ Forward) c Next channel Previous channel d Exit the on-screen menu e Control the cursor in the menu f Use to see information on the current broadcast g Runs the Anynet+ view functions and sets up Anynet+ devices.

Continued.

English - 8

3:39:51

Viewing the Remote Control (PS42C9HD/PS42C96HD/PS50C9HD/PS50C96HD)
This is a special remote control for the visually impaired persons, and has Braille points on the Power, Channel, Volume, STOP, and PLAY/PAUSE buttons. The performance of the remote control may be affected by bright light. h Picture-In-Picture On/Off i Picture effect selection (Refer to page 19) j Digital subtitle display k Picture freeze l If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again. Teletext Functions (Refer to page 51) 5 Exit from the teletext display (depending on the model) 8 Teletext index 0 Fastext topic selection @ Teletext size * Teletext mode selection (LIST/FLOF) ( Teletext sub page c P :Teletext next page P :Teletext previous page d Teletext cancel f Teletext reveal g Teletext display/mix both teletext information and the normal broadcast h Teletext hold i Teletext store

Plug & Play Some DTV functions may not be available. Digitally Scan?
Plug & Play Auto Store P 1 C -40 MHz 0 %

Enter Skip

Plug & Play Clock Set Month Day

Year 2007

Hour 12

Minute 00

Adjust

Plug & Play

Services found: 0

Channel: -

Plug & Play Scanning for digital services. Services found: 6 Channel: 35 29%
Plug & Play The Iberian Peninsula and Balears Islands Canarian Islands

Select

English - 12

3:39:57

15 Press the or button to select Month, Day, Year, Hour, or Minute. Set these by pressing the or button. You can set the Month, Day, Year, Hour, or Minute directly by pressing the numeric buttons on the remote control. 16 Press the ENTER/OK button to confirm your setting. The message Enjoy your viewing is displayed. When you have finished, press the ENTER/OK button. Even if the ENTER/OK button is not pressed, the message will automatically disappear after several seconds.
Plug & Play Set the current time. Month

Day 15 Minute 00

01 Hour 12 Adjust Move

Enjoy your viewing OK

If you want to reset this feature 1 Press the MENU button to display the menu. 2 Press the or button to select Setup, then press the ENTER/OK button. 3 Press the ENTER/OK button again to select Plug & Play. The message Start Plug & Play is displayed.
Setup Plug & Play Language Time Game Mode Blue Screen Melody PC Home Theatre PC Light Effect More Move : English : Off : Off : Off : Off : Off Enter Return
Viewing an External Signal Sources
You can switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box, and the TV source (broadcast or cable). 1 Press the MENU button to display the menu. 2 Press the or button to select Input, then press the ENTER/OK button. 3 Press the ENTER/OK button again to select Source List. 4 Press the or button to select the signal source, then press the ENTER/OK button. Available signal sources: TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, DTV HDMI3 mode is available only in PS42Q96HD/ PS42Q97HD/PS50Q96HD/PS50Q97HD models.
TV Source List Edit Name Anynet+ Input : TV
Move TV TV Ext.1 Ext.2 AV S-Video Component PC HDMI1 HDMI2 HDMI3 DTV Move
Enter Source List : : : : : : : : : : Enter

Return

You can select these options simply by pressing the SOURCE button on the remote control.

Channel Country : Belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1 Press the MENU button to display the menu. 2 Press the or button to select Channel, then press the ENTER/OK button. 3 Press the or button to select Manual Store, then press the ENTER/OK button. 4 Select the required option by pressing the or button, then press the ENTER/OK button. 5 When you are satisfied with your setting, press the ENTER/OK button. 6 Press the EXIT button to exit.

Move TV

Enter Manual Store
Programme Colour System Sound System Channel Search Store
:P 1 : Auto : BG 4 :C : 63 MHz :?
Move Enter Return Programme (Programme number to be assigned to a channel) Press the or button until you find the correct number. You can also select the channel number directly by pressing the numeric buttons (0~9). Colour System: Auto/PAL/SECAM/NTSC4.43 Press the or button to select the required colour standard. Sound System: BG/DK/I/L Press the or button to select the required sound standard. Channel (When you know the number of the channel to be stored) Press the or button to select C (Air channel) or S (Cable channel). Press the button, then press the or button to select the required number. You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required. Search (When you do not know the channel numbers) Press the or button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number) Set to OK by pressing the ENTER/OK button.
Channel mode mode): When completing tuning, the broadcasting stations in your area have P (Programme
been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode. C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

English - 15

3:40:00
Adding / Locking Channels Not available in DTV or external input mode. Using the Channel Manager, you can conveniently lock or add
channels. 1 Press the MENU button to display the menu. 2 Press the or button to select Channel, then press the ENTER/OK button. 3 Press the or button to select Channel Manager, then press the ENTER/OK button. Adding channels Using the Channel List, you can add channels. Select Channel List by pressing the ENTER/OK button. Move to the ( ) field by pressing the /// buttons, select a channel to be added, and press the ENTER/OK button to add the channel. If you press the ENTER/OK button again, the ( ) symbol next to the channel disappears and the channel is not added.

TV Picture Mode : Movie Contrast Brightness Sharpness Colour Tint G 50 Colour Tone : Warm2 Detailed Settings More Move Enter Return R 50
Detailed Settings Black Adjust Dynamic Contrast Gamma White Balance My Colour Control Edge Enhancement Colour Space : Off : Low : 0 : Off : Wide
Black Adjust: Off/Low/Medium/High You can directly select the black level on the screen to adjust the screen depth. Dynamic Contrast: Off/Low/Medium/High You can adjust the screen contrast so that the optimal contrast is provided. Gamma: -3 ~ +3 You can adjust the middle brightness of pictures. Press the or button until you reach the optimal setting. White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset You can adjust the color temperature for more natural picture colors. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the ENTER/OK button. Press the or button until you reach the optimal setting. Reset: The previously adjusted white balance will be reset to the factory defaults. My Colour Control: Pink/Green/Blue/White/Reset This setting can be adjusted to suit your personal preferences. Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the ENTER/OK button. Press the or button until you reach the optimal setting. Reset: The previously adjusted colours will be reset to the factory defaults. Edge Enhancement: Off/On You can emphasize object boundaries. Colour Space: Auto/Wide You can set the colour reproduction space for the input signal to Auto or Wide.

English - 20

3:40:06
Selecting the Picture Size
You can select the picture size which best corresponds to your TV viewing requirements. 1 Press the MENU button to display the menu. 2 Press the ENTER/OK button to select Picture. 3 Press the or button to select Size, then press the ENTER/ OK button. 4 Select the required option by pressing the or button, then press the ENTER/OK button. Available options: Auto Wide, 16:9, Wide Zoom, Zoom, 4:3, Just Scan TV Auto Wide: Expanding and pulling up the picture from 4:3 to 16:9 ratio. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Move the screen up/down using the or button after selecting the by pressing the or ENTER/OK button. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. Just Scan: Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i signals are input. With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off or a specific colour appears on the screen. 5 Press the EXIT button to exit. You can change the picture size simply by pressing the P.SIZE button on the remote control. Depending on the input source, the picture size options may vary. The items available may differ depending on the selected mode.

Picture More Size Screen Mode Digital NR Active Colour DNIe Movie Plus Reset : Auto Wide : 16 : 9 : Auto : On : Off : On : OK

Enter Size

Auto Wide 16:9 Wide Zoom Zoom 4:3 Just Scan
Positioning and Sizing the screen using Zoom Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction using the or button as well as the screen size. Move the screen up/down using the or button after selecting the by pressing the or button. Resize the screen vertically using the or button after selecting the by pressing the or button.
Selecting the Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide TV, TV you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. 1 Press the MENU button to display the menu. 2 Press the ENTER/OK button to select Picture. 3 Press the or button to select Screen Mode, then press the ENTER/OK button. 4 Select the required option by pressing the or button, then press the ENTER/OK button. Available options: 16:9, Wide Zoom, Zoom, 4:3 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. 5 When you are satisfied with your setting, press the ENTER/OK button. 6 Press the EXIT button to exit.

English - 21

Picture More Size Screen Mode Digital NR Active Colour DNIe Movie Plus Reset : Auto Wide : 16 : 9 : Off : On : Off : On : OK

3:40:07

Digital NR / Active Colour / DNIe / Movie Plus
TV Picture Press the MENU button to display the menu. More Press the ENTER/OK button to select Picture. : Auto Wide Size Select the required option by pressing the or button, then : 16 : 9 Screen Mode : Auto Digital NR press the ENTER/OK button. : On Active Colour : Off DNIe Available options: Digital NR, Active Colour, DNIe, Movie : On Movie Plus Plus : OK Reset When you are satisfied with your setting, press the ENTER/OK button. Return Enter Move Press the EXIT button to exit. Digital NR: Off/Low/Medium/High/Auto If the signal received by the television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. Active Colour: Off/On If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture. This function is not available in PC mode. This function is not available in Movie and Standard mode. DNIe: Off/Demo/On This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. This function is not available in PC mode. Movie Plus: Off/On (PS42Q96HD/PS42Q97HD/PS50Q96HD/PS50Q97HD) You can view more natural skin and clear text even in fast moving scenes. The Wide Zoom, Zoom and Just Scan mode is not supported.

English - 31

Input Mode (PC)
Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal Vertical Horizontal Resolution frequency frequency (Dot X Line) (Hz) (kHz) 640 x x x 480 70.086 70.087 59.940 70.000 72.809 75.000 60.317 70.000 72.188 75.000 60.004 70.069 72.000 75.029 60.015 31.469 31.469 31.469 35.000 37.861 37.500 37.879 43.750 48.077 46.875 48.363 56.476 57.672 60.023 47.712 Vertical polarity N P N N/P N N P N/P P P N N N/P P P PS42Q96HD/ PS50Q96HD/ Horizontal PS42Q97HD/ PS50Q97HD/ polarity PS42C9HD/ PS50C9HD/ PS42C96HD PS50C96HD P N N N/P N N P N/P P P N N N/P P P

IBM PC / AT Compatible

800 x 600

1024 x x 768

(N: Negative / P: Positive) The interlace mode is not supported. The television might operate abnormally if a non-standard video format is selected. 480i/p, 576i/p, 720p, or 1080i is not available in PC mode. For the PS42Q96HD/PS42Q97HD/PS42C9HD/PS42C96HD, PC text quality is optimum in XGA mode (1024 x 768@60Hz). For the PS50Q96HD/PS50Q97HD/PS50C9HD/PS50C96HD, PC text quality is optimum in WXGA mode (1360 x 768@60Hz). (The three pixels each on the left and right are grayed at the resolution setting of 1360 x 768@60Hz. This is not a mechanical problem but a result caused by the pixel difference between the standard resolution and the PDP panel.)

English - 32

Setting the PC Preset to the PC mode by pressing the SOURCE button.
Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTER/OK button. Press the or button to select PC, then press the ENTER/ OK button. Select the required option by pressing the or button, then press the ENTER/OK button. Available options: Image Lock, Position, Auto Adjustment, Image Reset When you are satisfied with your setting, press the ENTER/OK button. Press the EXIT button to exit. Image Lock: Coarse/Fine The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1 Press the or button to select Coarse or Fine, then press the ENTER/OK button. 2 Press the or button to adjust the screen quality, vertical stripes may appear or the picture may be blurry. Press the ENTER/OK button. Position Adjust the PCs screen positioning if it does not fit the TV screen. 1 Adjust the position by pressing the /// button. 2 Press the ENTER/OK button. Auto Adjustment Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. Image Reset You can replace all image settings with the factory default values.

Now Next Watch Full Guide Favourites

English - 39

3:40:26
To view programme information, press the /// button to select a programme of your choice, then press the INFO button. Information such as the channel number, programme title and running time, status bar, and brief summary of the highlighted programme will be displayed in the top right corner of the screen. If there is a lengthy summary, will be displayed. Press the INFO button for the full summary text. Six channels are displayed. To scroll between channels, move to a channel using the or button. To display page by page, use the P or button. 2.2 Scheduled List Scheduled List If you make a scheduled viewing list of programs you may Thursday 22 Apr 15:30 ~ 18:00 Once 2 BBC TWO Animal Park like to see, the channel will be automatically switched to the Thursday 22 Apr 20:00 ~ 21:00 Once scheduled program at the scheduled time even if you are 2 BBC TWO The Hairy Bikers watching another program. Press the red button to add a new programme. The menu for adding a programme is displayed with Channel Add Programme Edit Delete selected. Move Return Press the / and ENTER/OK buttons to set the required channel, time, date, and frequency. When you are satisfied Scheduled List with your settings, save the adjusted schedule by pressing Channel 810 Super RTL the red button. 10 : 15 to - - : - Time If you want to edit the scheduled programme, select a programme by pressing the or button, then press the Date Thu 03 Mar 2005 green button. If necessary, select the programme to be Frequency deleted by pressing the or button, then press the blue Save Cancel button. Adjust Move Return When watching analog TV, the reserved DTV channel cannot be changed. The channel is only changed automatically to the reserved channel when you are watching DTV. Scheduling programme only functions with the television already turned on, and not from standby mode. For details about switching the television on and off automatically, refer to page 10.
2.3 Default Guide You can preset the default guide style. Press the or button to select the required option (Now/Next or Full Guide), then press the ENTER/OK button. The selected option for default guide is displayed on the EPG menu and the channel list appears.

Enter Guide

Now & Next Guide Full Guide Scheduled List Default Guide Now/Next : Full Guide Full Guide

English - 40

3:40:29
2.4 All Channels and Favorite Channels In the EPG menu, you can display all channels or favourite channels. Press the green button repeatedly to toggle between the all and favourite channels list. When the favorite channel list has not been set up: The favorite list is empty. Would you like to choose your favorite now? message is displayed. Select Yes. The Edit Favourite Channels menu is displayed. If you select No, all channels will remain unchanged. To edit the favourite channels, refer to page 38 for more details. All Channels is the list of channels that have been scanned by the channel list update. All channels are displayed in the all channel mode. Favourites (favourite channels) is the list of channels that has been set in the Edit Favourite Channels menu (refer to page 38). When there is no channel information, the No Data message will be displayed and you will not be able to change the channel even if you press the ENTER/OK button. When the No Data message appears and you cannot change the channel, press the channel number directly using the numeric buttons.

Now & Next Guide

Full Guide

Favourites

The favourites list is empty. Would you like to choose your favourites now? Yes No
Language This menu consists of 4 sub-menus: Audio Language, Subtitle Language, Teletext Language, and Preference.
Language Audio Language Subtitle Language Teletext Language Preference
3.1 Audio Language / Subtitle Language / Teletext Language You can change the default value for subtitle, audio and teletext languages. Press the or button to select required menu (Audio Language, Subtitle Language, or Teletext Language), then press the ENTER/OK button. The options of the selected menu are displayed.

English - 41

3:40:30
Language 3.2 Preference This menu consists of 6 sub-menus: Audio Language Primary Audio Language, Secondary Audio Language, Subtitle Language Primary Subtitle Language, Secondary Subtitle Language, Teletext Language Primary Teletext Language, and Secondary Teletext Preference Language. Using this feature, users can select one of the languages (English, German, Italian, Swedish, French, Welsh, Gaelic, Move Enter Return Irish, Danish, Finnish, Norwegian, Spanish, Czech, and Greek). Preference The language selected here is the default when the user selects a channel. Primary Audio Language : German Press the or button to select required menu (Primary Secondary Audio Language : German Audio Language, Secondary Audio Language, Primary Primary Subtitle Language : German Subtitle Language, Secondary Subtitle Language, Secondary Subtitle Language : German Primary Teletext Language, or Secondary Teletext Primary Teletext Language : German Language), then press the ENTER/OK button. The options of the selected menu are displayed. Move Enter Return Press the or button to select required option (English, Preference German, Italian, Swedish, French, Welsh, Gaelic, Irish, Danish, Finnish, Norwegian, Spanish, Czech, or Greek), Primary Audio Language : German English then press the ENTER/OK button. German Secondary Audio Language : German Italian If you change the language setting, the Audio Primary Subtitle Language : German Swedish Language, Subtitle Language, and the Teletext Secondary Subtitle Language : German French Welsh Language of the Language menu (refer to page 41) Primary Teletext Language : German are automatically changed to the selected language. The Audio Language, Subtitle Language, and the Move Enter Return Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Audio Language, Primary Subtitle Language, or the Primary Teletext Language of the Preference menu.

Anynet+ Device

The Anynet+ function only works when the remote control is set to TV. REC button works only while in The cannot control Anynet+ devices the recordable state. the side of the TV. You can control Anynet+ using You only using the TV remote control. the buttons on devices The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device. dont operate for The Anynet+ functionscolor buttons may the products from other manufacturers. mode, the not work properly. In Anynet+ operations may differ depending on the device. The , Recording
You can make a recording of a TV program using a recorder. Press the REC button. Recording begins. (Only when the Anynet+ enabled recording device is connected.) The current TV program is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded. You can also record the source streams by selecting Record after pressing the Anynet+ button. Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual.

English - 49

Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker. 1 Press the Anynet+ button. TV P1 Press the or button to select Receiver, then press the ENTER/OK button. View TV 2 Press the or button to select to On, then press the Select Device ENTER/OK button. Record Now you can listen to sound through the receiver. Menu on Device 3 Press the EXIT button to exit. Device Operation When the receiver is set to On, you can listen to the TV sound Receiver :On through the 2-channel receiver. Setup If the receiver is exclusively for a home theater only (supporting Move Enter audio only), it may not appear in the device list. Exit Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work. In case of a content with copyright problem, listening through the receiver may not properly operate. When listening through the receiver, there are restrictions for using the PIP and audio-related menu.
Check Points before Requesting Service
Symptom Anynet+ does not work.

I want to start Anynet+.

I want to exit Anynet+.
The Connecting to Anynet+ device message appears on the screen.
The Anynet+ device does not You cannot use the play function when Plug & Play is in progress. play. The connected device is not Check whether or not the device supports Anynet+ functions. displayed. Check whether or not the HDMI cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Search Anynet+ devices again. You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. The TV program cannot be Check whether the antenna jack on the recording device is properly recorded. connected. The TV sound is not output Connect the optical cable between TV and the receiver. through the receiver.

English - 50

Solution Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Connect only one receiver. Check if the Anynet+ device power cord is properly connected. Check the Anynet+ devices Video/Audio/HDMI cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control. Anynet+ doesnt work at a certain condition. (Searching channels) When connecting or removing the HDMI cable, please make sure to search devices again or restart your TV. Check if the Anynet+ Function of Anynet+ device is set on. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. Press the TV button on the TV remote control to switch to TV. Then press the Anynet+ button to show the Anynet+ menu and select a menu you want. Select View TV in Anynet+ menu. Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. Press any of CH, CH LIST, and PRE-CH to change to the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control when the Anynet+ setting or switching to view mode is complete.
Teletext Feature (depending on the model)
Most television stations provide written information services via teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
1 TV/DTV Exit from the teletext display (depending on the model) 2 (index) Used to display the index (contents) page at any time while you are viewing teletext. 3 (teletext on/mix) Press to activate teletext mode after selecting the channel providing the teletext service. Press it twice to overlap the teletext with the current broadcasting screen. (size) Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again. (mode) Press to select the teletext mode (LIST/FLOF). If you press it in the LIST mode, it switches into the List save mode. In the List save mode, you can save teletext page into list using the (store) button. (sub-page) Used to display the available sub-page. (page up) Used to display the next teletext page. (page down) Used to display the previous teletext page. (cancel) Used to display the broadcast when searching for a page. (reveal) Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again. Coloured buttons (red/green/yellow/blue) If the FASTEXT system is used by a broadcasting company, the different topics covered on a teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button. (hold) Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically. To resume, press it again. (store) Used to store the teletext pages.

can change teletext Youremote control. pages by pressing the numeric buttons on the

English - 51

3:40:44
The teletext pages are organized according to six categories: Part A B C D E F Contents Selected page number. Broadcasting channel identity. Current page number or search indications. Date and time. Text. Status information. FASTEXT information.
Teletext information is often divided between several pages displayed in sequence, which can be accessed by:
Entering the page number Selecting a title in a list Selecting a coloured heading (FASTEXT system)
Press the TV/DTV button to exit from the teletext display.

English - 52

3:40:46
Installing the Wall Mount Kit
This installation is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer. Wall Mount Kit Specifications (VESA)

Product Family

inch 23 ~ ~ ~ 42 ~ 50 63
VESA Spec. (A * B) 200 * * * * * 400 No VESA
Standard Screw (C * D) M4 * L10 M6 * L10 M8 * L15 M8

Quantity 4 6

LCD-TV

PDP-TV 3 4

We provide the standard dimensions for wall mount kits as shown in the table above. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. Our 63 model does not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model.

English - 53

3:40:47
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up the Remote to Operate Your VCR 1 Turn off your VCR. 2 Press the VCR button on your TVs remote control. 3 Press the SET button on your TVs remote control. 4 Using the number buttons on your remote control, enter three digits of the VCR code listed on page 56 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a 0. (If more than one code is listed, try the first one.) 5 Press the POWER button on the remote control. Your VCR should turn on if your remote is set up correctly.