POWERPOD 1860 DELUXE

Specifications
POWER AMP, output power in watts @THD<0.5%, 1KHz Number of Power Channels Limiter 8 ohms per Channel 4 ohms per Channel 8 ohms Bridge Mono Inputs Total Channels Balanced mono mic/line channels Stereo line channels with mic preamp 2T Input (RCA & mini stereo jacks) Outputs Main L/R Stereo Main Mono Aux Send & Effect Send Phones Control RM or Zone 2 Output Rec Out Speaker Output Channel Strips Aux / Efx Control Pan/Balance Control Channel On/Mute Channel PFL with metering LED Indicators Volume Controls Insert Master Section Aux Send Masters Effects Return to Monitor Phones/Control RM/Zone 2 Level Control Control Room Mode Faders Metering Number of Channels Segments Phantom Power Supply Switch Effect Processor +48V DC Master + effects with one main parameter control, tap delay control, foot switch (effect on/off, tap) Built-in graphic EQ Center Frequency Range Stereo 10-band 40, 80, 160, 315, 630, 1.25K, 2.5K, 5K, 10K, 16 KHz +12 dB Rack Mounting Kit 2, 60mm fader Yes Yes ST, PFL/AFL Efx, Aux 1, Aux 2, Mono, Main L/R (60mm fader) 2 x 1/4" TS, Unbal. 1/4" TS, Unbal. 4 x 1/4" TS, Unbal. x 1/4" TS, Unbal. 1x Mini stereo, 2x RCA jacks 2 x speakon & 4 x 1/4" TS Yes Yes Yes On, Peak, Signal, PFL 60mm faders Yes ( XLR+ 1/4" combo jack) 2 (XLR & 2x 1/4") 1 ( 1x mini stereo & 2x RCA jacks) 800 Noise: 20Hz to 20KHz bandwidth, IHF-A weighted, line inputs to main L/R outputs, all channels assigned, panned L/R Master output, all fader down Power amp output, all fader down THD Power output, 1KHz, 20Hz to 20KHz Any output, 1KHz @ +14dBu, 20Hz to 20KHz, channel inputs CMRR 1 KHz @ -60dBu, Gain at maximum Crosstalk 1KHz @ 0dBu, 20Hz to 20KHz bandwidth, channel in to main L/R outputs Channel fader down, other channels at unity Channel muted, other channels at unity Frequency Response (mic input to output) 20Hz ~ 20KHz, line level o/p @ +4dBu into 600 ohms 20Hz ~ 20KHz, power amp o/p 1 watt into 8 ohms Maximum Level Mic Preamp Input All Other Inputs Unbalanced Outputs Impedance Mic In Line In All Other Inputs (except inserts) RCA 2T Outputs All Other Outputs Equalization Low EQ Mid EQ Hi EQ Low Cut Filter Microphone Preamp E.I.N. 150 ohms terminated, max gain Power Consumption(Average Maximum) Power Requirement Net Weight Dimensions(WxHxD) 483 x 142.6 x 466.2mm (19" x 5.6" x 18.4") <-122dBm 400 Watts 5K ohms 50K ohms 10K ohms 600 ohms 150 ohms 3-band, +15 dB 80 Hz 2.5 KHz 12 KHz 75Hz (-18dB/oct) +22 dBu +22 dBu +22 dBu +0/-2 dB +0/-2 dB <-63 dB <-64 dB 80 dB @200 watts, 4 ohms <0.5% <0.3% <-94 dBu <-63 dBu
Switchable between 115VAC & 230VAC, 50/60 Hz
V1.2 08/03/04 Information in this document is subject to change without notice.

448 mm

WWW.PHONIC.COM

POWERPOD1860 DELUXE

POWERPOD1860 DELUXE 2X 400W, 8 Mic/Line 2 Stereo GEQ DFX Powered Mixer
400W + 400W output power, selectable and assignable 12-channel mixer with low cut 3-band channel EQ and 4 AUX sends Stereo 10-band graphic EQ 16 multi-effects plus one main parameter control, and tap control Molded protection cover Less weight achieved by switching power supply Mixing units for use in sound recording

Molded Protection Cover

FEATURES 2 x 400 Watt / 4 ohm power amplifier, bridgeable and patchable Less weight achieved by high-efficiency switching power supply 10 mic preamp in total 8 Mic/Line input channels with 3-band EQ and inserts 2 stereo input channels with 3-band EQ, each includes one mic preamp 2 stereo returns, each can be routed to aux 1 & 2 sends (effect to monitor) Stereo 10-band graphic EQ Effect processor with 16 effects plus parameter control and tap control Foot switch allows user to on/mute effect processor and tap delay 4 Aux sends, aux 1/2 are pre-fader and EFX 3/4 are post-fader +48V individual phantom power switches Mono output with variable low pass filter from 60 Hz up to 160 Hz PFL on each input and AFL on each output Stand-by switch for playing music between sets Zone 2 output for side fill or another PA system Headphone output with separate rotary level control Mini stereo phone jacks and RCA jacks for tape in and record output One professional speaker connector and two 1/4" phone jacks per channel for speaker connection Molded protective cover to avoid scratch surface Rugged metal main chassis with integrated handle Mains power switchable between 115VAC and 230VAC Optional rack-mounting kit, model name ERK12
The Powerpod 1860 Deluxe is a 400-Watt per channel powered mixer with 16 built-in digital effects, parameter control and foot switch controllability. It features 8 mono input channels, as well as 2 stereo input channels, individual phantom power switches, 3-band channel EQs, and a stereo 10-band system EQ. Added features such as a convenient handle integrated into the mixer's base and a removable protective cover makes the Powerpod 1860 Deluxe perfect for club bands, churches, schools, and wherever a compact and portable self-contained audio system is needed.

POWERPOD 1860

400W + 400W output power Low cut filters, 3-band channel EQ and four AUX sends Stereo 7-band graphic EQ 16 high-definition digital effects Molded protection cover
800W 12-Channel Powered Mixer with Graphic EQ & DFX

FEATURES

400W + 400W / 4 ohms stereo power amplifier (bridgeable and

patchable)

DFX, our 32/40-bit digital multi-effect processor with with 16
preset programs plus parameter control and foot switch jack
8 balanced Mic inputs with inserts Total of 12 Line inputs Two stereo Line input channels capable of accepting

RCA/Phone inputs

3-band channel EQ Stereo 7-band graphic EQ Four AUX sends (AUX 1/2 are pre-fader and EFX 1/2 are

post-fader)

Two stereo AUX returns, each can be routed to AUX 1 & 2
sends (effect to monitor)
Stereo RCA I/O for CD/TAPE external sources Grouped +48V real phantom power for broad application Mono output for extra zone filling or as subwoofer processing

source

PFL on each input and AFL on each output Standby switch to mute channels 1 through 12 for playing

music between sets

Zone 2 output for side fill or another PA system Headphone/control room output with rotary level control One professional Speakon-type jack and two 1/4 jacks per
channel for speaker connection
Rugged metal main chassis with integrated handle Low weight achieved by high-efficiency switching power supply Molded protective cover prevents scratching or damage to
Mains power switchable between 115 VAC and 230 VAC
The Phonic Powerpod Plus Series of mixers are Powered Mixers built into a compact and durable molded cabinet. Each Powerpod Plus has a built-in stereo amplifier which is bridgeable and patchable. Super Hi-Z inputs allow for the addition of guitars and other instruments. The mixers feature onboard DFX, our own 32/40-bit digital effects processors with 16 preset programs and parameter. The 3-band EQ on every channel and dual multi-band graphic EQ with selectable In/Out switches give you maximum control over your mix.

Specifications

POWER AMP, output power in watts @ THD<0.5%, 1KHz Number of Power channels Limiter 8 ohms per channel 4 ohms per channel 8 ohms Bridge Mono Inputs Total Channels Balanced Mono Mic/Line Channels Stereo Line Channels with mic preamp 2T Input Outputs Main L/R Stereo Main Mono Aux Send & Effect Send Phones Control RM or Zone 2 Output REC Out Speaker Outputs Channel Strips Aux / Efx Control Pan/Balance Control Channel On/Mute Channel PFL with metering LED Indicators Volume Controls Insert Master Section Aux Send Masters Effects Return to Monitor Phones/Control RM/Zone 2 Level Control Control Room Mode Faders Metering Number of Channels Segments Phantom Power Supply Switch Effect Processor Built-in Graphic EQ Center Frequency Range +48VDC Master + effects with one main parameter control, foot switch Stereo 7-band 63, 160, 400, 1K, 2.5K, 6.3K, 12KHz +12dB 2, 60mm fader Yes Yes ST, PFL/AFL Efx, Aux1, Aux2, Mono, Main L/R (60mm fader) 2 x 1/4 TS, Unbal. 1/4 TS, Unbal. 4 x 1/4 TS, Unbal. x 1/4 TS, Unbal. 2 x RCA jacks 2 x speakon & 4 x 1/4 TS Yes Yes Yes On, Peak, Signal, PFL 60mm faders Yes (XLR+1/4 combo jack) 2 (XLR & 2x1/4) 2 x RCA jacks 800
THD Power output, 1KHz, 20Hz to 20KHz CMRR 1 Khz@-60dBu, Gain at maximum Crosstalk 1KHz @ 0dBu, 20Hz to 20KHz bandwidth, channel in to main L/R outputs Channel fader down, other channels at unity Channel muted, other channels at unity Frequency Response (Mic input to output) 20Hz~20KHz, line level o/p @ +4dBu into 600 ohms 20Hz~20KHz, power amp o/p 1 watt into 8 ohms Maximum Level Mic Preamp Input All Other Inputs Unbalanced output Impedance Mic in Line in All Other Input (except insert) RCA 2T Output All other outputs Equalization Low EQ Mid EQ Hi EQ Low Cut Filter Microphone Preamp E.I.N. 150 ohms terminated, max gain Power Consumption (Average Maximum) Power Requirement Net Weight Dimensions (WxHxD) <-122dBm 400 Watts 14.3Kg (31.5 lbs) 483 x 142.6 x 466.2 mm (19 x 5.6 x 18.4) 5K ohms 50K ohms 10K ohms 600 ohms 150 ohms 3-band, +15 dB 80Hz 2.5 KHz 12 KHz 75 Hz (-18dB/oct) +22dBu +22dBu +22dBu +0/-2dB +0/-2dB <-63dB <-64dB 80dB @200 watts, 4 ohms<0.5% <0.3% Any output, 1KHz@+14dBu, 20Hz a 20KHz, channels inputs
Switchable between 115/230 VAC, 50/60Hz

Rack Mounting Kit

Noise: 20Hz to 20KHz bandwidth, IHF-A weighted, line inputs to main L/R outputs, all channels assigned, panned L/R Master output, all fader down Power amp output, all fader down <-94dBu <-63dBu

142.6 mm /5.6" 483 mm / 19"
V1.2. 06/ / Information in this document is subject to change without notice.

WWW.PHONIC.COM