2009 BMW G 650 Xcountry

MSRP:$7,500.00*Destination charge (not included in MSRP):$495
Copyright 2008 BMW of North America, LLC., Woodcliff Lake, New Jersey all rights reserved. *Actual price determined by dealer. Price excludes taxes, license, options and handling charge. Prices and specifications subject to change without notice.

Engine

Type Bore x Stroke Displacement Horsepower Torque Compression Ratio Valve Gear Valves Valves / Cylinder Engine Oil Capacity Liquid-cooled single-cylinder 100.0 mm x 83.0 mm 652 cc 53 bhp @ 7000 rpm 44 lb/ft @ 5250 rpm 11.5 :1 DOHC, chain-driven with bucket tappets 2 x 36 mm intake / 2 x 31 mm exhaust Four 2.4 quarts

Wheels and Tires

Front Wheel Rear Wheel Front Tire Rear Tire 2.50 x 19 wire-spoke 3.00 x 17 wire-spoke 100/90 x 19 tube-type 130/80 x 17 tube-type

Dimensions

Overall Length Overall Width Wheelbase Ground Clearance Seat Height Steering Angle Front Wheel Trail Weight - Dry Weight - Wet Maximum Load 86.0 inches 35.7 inches 59.0 inches Info. Unavailable 33.1 inches 61.5 degrees 4.6 inches 326 lbs. excluding options & accessories 353 lbs. excluding options & accessories 739 lbs. GVWR
Engine Management BMW Motor Controller - Compact (BMS-C II) Fuel Requirement Fuel Tank Fuel Capacity Charging System Battery Cooling System Premium Unleaded HDPE, internal pump and external filter 2.5 U.S. gallons including one gallon reserve 280 Watts @ 14 Volts 12 Volts 10 Amps/hour maintenance-free Single Radiator, 50/50 water/anti-freeze mix

CodePrice N31N / C

Description Sunset Yellow / White Aluminum Metallic

Drivetrain

Primary Drive Clutch 1st Gear Ratio 2nd Gear Ratio 3rd Gear Ratio 4th Gear Ratio 5th Gear Ratio 6th Gear Ratio Final Drive System Final Drive Ratio 1:1.946 Multiple plate in oil bath 2.75:1 1.75:1 1.31:1 1.05:1 0.84:1 N/A Chain 2.937:1

Standard Equipment

588N / C White Turn Signals

Available Equipment

524$900 ABS

Frame and Suspension

Frame Front Suspension Front Travel Rear Suspension Rear Travel Steel bridge tubular frame UPSD fork 45 mm 9.4 inches Aluminum two unit cast swing arm, air damping 8.3 inches

Brakes

Brake System Front Brakes Front Rotor Rear Brake Rear Rotor Actuation Method Front and rear disc with optional ABS One two piston caliper 11.8 inch fixed rotor One, single-piston floating caliper 9.5 inch fixed rotor Hydraulic, DOT 4 fluid type

151.128

150.960
Please check now the function of your centre stand and control all assembled screw connections for tightness! General: Centre stand cornering clearance: HEPCO & BECKER centerstands are carefully designed and tested to eliminate reductions in cornering clearance and ground clearance under most driving conditions on an unmodified stock motorcycle, and are certified to be compliant with European ABE safety standards. Use of any centrestand may reduce corning clearance or ground clearance under extreme driving situations. HEPCO & BECKER products should be installed by a qualified, experienced motorcycle technican. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. HEPCO & BECKER takes no resposibility for damages caused by improper installation. All screws, bolts, and nuts, including all replacement hard ware provided by HEPCO & BECKER, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. The side-sway-behavior may be restricted by the centre stand.
Also available: Side carrier Rear carrier Engine guard
No.650.01 black (Lock it System, removable) No.650.01 black No.black
Hepco & Becker GmbH An der Steinmauer 6 D-66955 Pirmasens Germany
Tel.: +- 1453 - 100 Fax: +- 1453 - 120 eMail: vertrieb@hepco-becker.de www.hepco-becker.de Luggage ideas.
Side cases Top cases luggage frames Lock it system Softbags Aluminium luggage Leather luggage Protection bars Center stands Chopper parts Quad parts Accessories
Preparing: Unmount footrest at the left and right side. Fastening of the adapter: On the left side, fix the adapter between footrest and frame with the countersunk allen screws. Top: M10 x 45 Bottom: M10 x 35

left side 2

Grease the marked points, shown in the picture. Hold the centre stand to the left adapter. In the next step, the centre stand is mounted between left and right adapter.

GREASE GREASE

Luggage ideas.
Fastening of the adapter: On the right side, fix the adapter between footrest and frame with the countersunk allen screws M10 x 40. NOTICE: Sandwich washers 20 x 10,5 x 3mm between frame and footrest ! During this process the centre stand is mounted between the adapters.

each 2x

right side
Fastening of the spring: The springs will be fixed at the dowel pin of the adapter. Then the spring has to be fastened on the other dowel pin at the side of the centre stand. We recommend our spring-mounting kit (item.-No.: 700.030)