The example of a command

* <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSSTEREO<CR> : surround Mode Set to STEREO MVUP<CR> : Master Volume UP PWON<CR> : system PoWer ON PWSTANDBY<CR> : system PoWer STANDBY SI?<CR> : Request command for now playing input source >> Return RESPONSE SI***<CR>

Others

A) COMMAND is receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT. C) CHANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE also including an intact channel. In this case, the data of an intact channel is set to "50". D) Since SURROUND MODE changes simultaneously when the INPUT source changes, the SURROUND MODE (and also the value of the channel volume of all channels , It described in B) ) returns as EVENT. E) When SURROUND MODE is the same in between INPUT source change before and after, EVENT of SURROUND MODE and CHANNEL VOLUME does NOT return. F) Although EVENT of SURROUND MODE returns when the present SURROUND MODE is set up again, CHANNEL VOLUME does NOT return. G) When SURROUND MODE is changed, before returning SURROUND MODE after change as EVENT, the present SURROUND MODE is returned. H) The RESPONSE should be sent as opposed to the request command by all the commands with which an EVENT exists , not need to the another request commands(ex. SV command). I) The PARAMETER (with COMMAND and RESPONSE, EVENT) of minimum level of MASTER VOLUME defines 99. J) If the MASTER VOLUME & CHANNEL VOLUME set with 0.5dB step, the PARAMETER (with COMMAND and RESPONSE, EVENT) defines three ASCII characters as bellows. Ex. MASTER VOLUME = +1.0dB : MV81<CR> +0.5dB : MV805<CR> 0dB : MV80<CR> -0.5dB : MV795<CR> -1.0dB : MV79<CR> | | -79.5dB : MV005<CR> -80.0dB : MV00<CR> -80.5dB : MV995<CR> --: MV99<CR> * At the **.0dB step, only uses two ASCII characters as PARAMETER, same as usual. K) 1 seconds later, please transmit the next COMMAND after transmitting a power on COMMAND PWON. -6-

COMMAND SI

PARAMETER NET/USB RHAPSODY NAPSTER IRADIO SERVER USB/IPOD FAVORITES ? ON OFF ? PHONO | USB/IPOD SOURCE ?
function (North America model Only)
Select USB or iPod Direct Return SI Status MAIN ZONE ON/OFF change Return ZM Status REC SELECT mode set , and select source ---The name of PARAMETER is the same as that of the time of SI COMMAND. REC SELECT mode cancel Return SR Status
example SINET/USB<CR> SIRHAPSODY<CR> SINAPSTER<CR> SIIRADIO<CR> SISERVER<CR> SIUSB/IPOD<CR> SIFAVORITES<CR> SI?<CR> ZMON<CR> ZMOFF<CR> ZM?<CR> SRPHONO<CR> | SRUSB/IPOD<CR> SRSOURCE<CR> SR?<CR>

COMMAND SD

PARAMETER AUTO HDMI DIGITAL ANALOG EXT.IN ? AUTO PCM DTS ? DVD HDP TV SAT/CBL VCR DVR V.AUX SOURCE ? OFF ?
function set AUTO mode (Priority:HDMI>>DIGITAL>>ANALOG) set force HDMI INPUT mode set force DIGITAL INPUT (Optical,Coaxial)mode set force ANALOG INPUT mode ---Set EXT.IN mode Return SD Status set DIGITAL INPUT AUTO mode set DIGITAL INPUT force PCM mode set DIGITAL INPUT force DTS mode Return DC Status VIDEO SELECT mode set , and select source
example SDAUTO<CR> SDHDMI<CR> SDDIGITAL<CR> SDANALOG<CR> SDEXT.IN<CR> SD?<CR> DCAUTO<CR> DCPCM<CR> DCDTS<CR> DC?<CR> SVDVD<CR> SVHDP<CR> SVTV<CR> SVSAT/CBL<CR> SVVCR<CR> SVDVR<CR> SVV.AUX<CR> SVSOURCE<CR> SV?<CR> SLPOFF<CR> SLP120<CR> SLP90<CR> SLP60<CR> SLP30<CR> SLP?<CR>
VIDEO SELECT mode cancel Return SV Status MAIN ZONE SLEEP TIMER setting

Return SLP Status

- 10 -

COMMAND MS

PARAMETER DIRECT PURE DIRECT STEREO STANDARD DOLBY DIGITAL DTS SUROUND NEURAL WIDE SCREEN MCH STEREO SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE MATRIX VIDEO GAME VIRTUAL ? QUICK1 QUICK2 QUICK3 QUICK4 QUICK5 QUICK1 MEMORY QUICK2 MEMORY QUICK3 MEMORY QUICK4 MEMORY QUICK5 MEMORY QUICK ?
function Select SURROUND mode
(North America model Only) ---5/7/9/11CH STEREO mode
Return MS Status QUICK SELECT 1-5 MODE SELECT
QUICK SELECT 1-5 MODE MEMORY

Return MSQUICK Status

example MSDIRECT<CR> MSPURE DIRECT<CR> MSSTEREO<CR> MSSTANDARD<CR> MSDOLBY DIGITAL<CR> MSDTS SURROUND<CR> MSNEURAL<CR> MSWIDE SCREEN<CR> MSMCH STEREO<CR> MSSUPER STADIUM<CR> MSROCK ARENA<CR> MSJAZZ CLUB<CR> MSCLASSIC CONCERT<CR> MSMONO MOVIE<CR> MSMATRIX<CR> MSVIDEO GAME<CR> MSVIRTUAL<CR> MS?<CR> MSQUICK1<CR> MSQUICK2<CR> MSQUICK3<CR> MSQUICK4<CR> MSQUICK5<CR> MSQUICK1 MEMORY<CR> MSQUICK2 MEMORY<CR> MSQUICK3 MEMORY<CR> MSQUICK4 MEMORY<CR> MSQUICK5 MEMORY<CR> MSQUICK ?<CR>

- 11 -

COMMAND VS
PARAMETER MONIAUTO MONI1 MONI2 MONI ? ASPNRM ASPFUL ASP ? SC48P SC10I SC72P SC10P SC10P24 SCAUTO SC ? SCH48P SCH10I SCH72P SCH10P SCH10P24 SCHAUTO SCH ? AUDIO AMP AUDIO TV AUDIO ? VST ON VST OFF VST ?
function Set HDMI MONITOR automatic detection Set HDMI MONITOR OUT-1 Set HDMI MONITOR OUT-2 Return VSMONI Status Set Normal mode Set FULL mode Return VSASP Status Set Resolution to 480p/576p Set Resolution to 1080i Set Resolution to 720p Set Resolution to 1080p Set Resolution to 1080p:24Hz Set Resolution to AUTO Return VSSC Status Set Resolution to 480p/576p (HDMI) Set Resolution to 1080i(HDMI) Set Resolution to 720p(HDMI) Set Resolution to 1080p(HDMI) Set Resolution to 1080p:24Hz(HDMI) Set Resolution to AUTO(HDMI) Return VSSCH Status(HDMI) Set HDMI AUDIO Output to AMP Set HDMI AUDIO Output to TV Return VSAUDIO Status Set VERTICAL STRETCH to ON Set VERTICAL STRETCH to OFF Return VSVST Status
example VSMONIAUTO<CR> VSMONI1<CR> VSMONI2<CR> VSMONI ?<CR> VSASPNRM<CR> VSASPFUL<CR> VSASP ?<CR> VSSC48P<CR> VSSC10I<CR> VSSC72P<CR> VSSC10P<CR> VSSC10P24<CR> VSSCAUTO<CR> VSSC ?<CR> VSSC48P<CR> VSSC10I<CR> VSSC72P<CR> VSSC10P<CR> VSSC10P24<CR> VSSCAUTO<CR> VSSCH ?<CR> VSAUDIO AMP<CR> VSAUDIO TV<CR> VSAUDIO ?<CR> VSVST ON<CR> VSVST OFF<CR> VSVST ?<CR>

- 12 -

COMMAND PS
PARAMETER TONE CTRL OFF TONE CTRL ON TONE CTRL ? SB:MTRX ON SB:PL2x CINEMA SB:PL2x MUSIC SB:ON SB:OFF SB: ? CINEMA EQ.ON CINEMA EQ.OFF CINEMA EQ. ? MODE:MUSIC MODE:CINEMA MODE:GAME MODE:PRO LOGIC MODE: ? FH:ON FH:OFF FH: ? MULTEQ:AUDYSSEY MULTEQ:BYP.LR MULTEQ:FLAT MULTEQ:MANUAL MULTEQ:OFF MULTEQ: ? DYNEQ ON DYNEQ OFF DYNEQ ?
function PARAMETER setting TONE CONTROL ON/OFF Return PSTONE CONTROL Status SURROUND BACK SP MODE set
Return PSSB: Status CINEMA EQ. ON/OFF Return PSCINEMA EQ.Status CINEMA / MUSIC / GAME / PL mode change (This parameter can change DOLBY PL2,PL2x,NEO:6 mode.) ---SB=ON PL2x mode / SB=OFF PL2 mode --- GAME can change DOLBY PL2 & PL2x mode --- PL can change ONLY DOLBY PL2 mode Return PSMODE: Status FRONT HEIGHT Output ON/OFF Return PSFH: Status MultEQ XT mode direct change

example PSTONE CTRL OFF<CR> PSTONE CTRL OFF<CR> PSTONE CTRL ?<CR> PSSB:MTRX ON<CR> PSSB:PL2X CINEMA<CR> PSSB:PL2X MUSIC<CR> PSSB:ON<CR> PSSB:OFF<CR> PSSB: ?<CR> PSCINEMA EQ.ON<CR> PSCINEMA EQ.OFF<CR> PSCINEMA EQ. ?<CR> PSMODE:MUSIC<CR> PSMODE:CINEMA<CR> PSMODE:GAME<CR> PSMODE:PRO LOGIC<CR> PSMODE: ?<CR> FH:ON<CR> FH:OFF<CR> FH: ?<CR> PSMULTEQ:AUDYSSEY<CR> PSMULTEQ:BYP.LR<CR> PSMULTEQ:FLAT<CR> PSMULTEQ:MANUAL<CR> PSMULTEQ:OFF<CR> PSMULTEQ: ?<CR> PSDYNEQ ON<CR> PSDYNEQ OFF<CR> PSDYNEQ ?<CR>
Return PSMULTEQ: Status Dynamic EQ = ON Dynamic EQ = OFF Return PSDYNEQ Status

- 13 -

PARAMETER function REFLEV 0 Reference Level Offset=0dB REFLEV 5 Reference Level Offset=5dB REFLEV 10 Reference Level Offset=10dB REFLEV 15 Reference Level Offset=15dB REFREV ? Return PSREFLEV Status DYNVOL ON Dynamic VOLUME = ON DYNVOL OFF Dynamic VOLUME = OFF DYNVOL ? Return PSDYNVOL Status DYNSET NGT Dynamic Vol. Setting = Midnight DYNSET EVE Dynamic Vol. Setting = Evening DYNSET DAY Dynamic Vol. Setting = Day DYNSET ? Return PSDYNSET Status DSX ON DSX ON/OFF DSX OFF DSX ? Return PSDSX Status STW UP STAGE WIDTH UP/DOWN , direct change to **dB STW DOWN **:00 to 99 by ASCII , 50=0dB STW ** ---AVR-4810 can be operated from -10 to 0(40 to 50) STW ? Return PSSTW Status STH UP STAGE HEIGHT UP/DOWN , direct change to **dB STH DOWN **:00 to 99 by ASCII , 50=0dB STH ** ---AVR-4810 can be operated from -10 to 0(40 to 50) STH ? Return PSSTH Status PS COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section)
example PSREFLEV 0<CR> PSREFLEV 5<CR> PSREFLEV 10<CR> PSREFLEV 15<CR> PSREFLEV ?<CR> PSDYNVOL ON<CR> PSDYNVOL OFF<CR> PSDYNVOL ?<CR> PSDYNSET NGT<CR> PSDYNSET EVE<CR> PSDYNSET DAY<CR> PSDYNSET ?<CR> PSDSX ON<CR> PSDSX OFF<CR> PSDSX ?<CR> PSSTW UP<CR> PSSTW DOWN<CR> PSSTW 50<CR> PSSTW ?<CR> PSSTH UP<CR> PSSTH DOWN<CR> PSSTH 50<CR> PSSTH ?<CR>

- 14 -

PARAMETER function BAS UP BASS UP/DOWN , direct change to **dB BAS DOWN **:00 to 99 by ASCII , 50=0dB BAS ** ---AVR-4810 can be operated from -6 to +6(44 to 56) BAS ? Return PSBAS Status TRE UP TREBLE UP/DOWN , direct change to **dB TRE DOWN **:00 to 99 by ASCII , 50=0dB TRE ** ---AVR-4810 can be operated from -6 to +6(44 to 56) TRE ? Return PSTRE Status DRC AUTO DRC direct change DRC LOW DRC MID DRC HI DRC OFF DRC ? DCO OFF D.COMP direct change DCO LOW DCO MID DCO HIGH DCO ? Return PSDCO Status LFE UP LFE UP/DOWN , direct change to **dB LFE DOWN **:00 to 99 by ASCII , 00=0dB, 10=-10dB LFE ** ---AVR-4810 can be operated from 0 to -10 LFE ? Return PSLFE Status EFF ON EFFECT ON/OFF , EFFECT LEVEL direct change to **dB EFF OFF **:00 to 99 by ASCII , 00=0dB, 10=10dB EFF ** ---AVR-4810 can be operated from 1 to 15 EFF ? Return PSEFF Status DEL UP DELAY UP/DOWN , direct change to ***dB DEL DOWN ***:000 to 999 by ASCII , 000=0ms, 300=300ms DEL *** ---AVR-4810 can be operated from 0 to 300 DEL ? Return PSDEL Status PS COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section)

Z3PS COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section)

- 21 -

COMMAND Z4
PARAMETER CD | USB/IPOD SOURCE ON OFF ? QUICK1 QUICK2 QUICK3 QUICK4 QUICK5 QUICK1 MEMORY QUICK2 MEMORY QUICK3 MEMORY QUICK4 MEMORY QUICK5 MEMORY QUICK ?
function ZONE4 mode set , and select source at AVR-4810 ---The name of PARAMETER is the same as that of the time of SI COMMAND. ZONE4 mode cancel ZONE4 ON/OFF change at AVR-4810 Return Z4 Status ZONE4 QUICK SELECT 1-5 MODE SELECT
ZONE4 QUICK SELECT 1-5 MODE MEMORY

Return Z4QUICK Status

example Z4CD<CR> | Z4USB/IPOD<CR> Z4SOURCE<CR> Z4ON<CR> Z4OFF<CR> Z4?<CR> Z4QUICK1<CR> Z4QUICK2<CR> Z4QUICK3<CR> Z4QUICK4<CR> Z4QUICK5<CR> Z4QUICK1 MEMORY<CR> Z4QUICK2 MEMORY<CR> Z4QUICK3 MEMORY<CR> Z4QUICK4 MEMORY<CR> Z4QUICK5 MEMORY<CR> Z4QUICK ?<CR>

- 22 -

ANALOG TUNER Control COMMAND TF PARAMETER ANUP ANDOWN AN****** (6 digits) AN? ANUP ANDOWN AN** (PRESET No.) AN? ANMEM ANAM ANFM AN? ANAUTO ANMANUAL function TUNER Frequency UP/DOWN --- ****.** kHz at AM band (>050000 is AM.) ****.** MHz at FM band (<050000 is FM.) Return TF Status TUNER PRESET CH UP/DOWN , direct change to No.** example TFANUP<CR> TFANDOWN<CR> TFAN105000<CR> (1050.00kHz at AM) TFAN?<CR> TPANUP<CR> TPANDOWN<CR> TPANA1<CR> (PRESET No.A1) TPAN?<CR> TPANMEM<CR> TMANAM<CR> TMANFM<CR> TMAN?<CR> TMANAUTO<CR> TMANMANUAL<CR>
Return TP Status TUNER PRESET MEMORY TUNER BAND , MODE Select ---Band set to AM ---Band set to FM Return TM Status ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode
TF, TP, TM COMMAND : '*' parameters can NOT operate when INPUT source isnt TUNER.

- 23 -

XM Control(North America model only)
COMMAND TF PARAMETER XMUP XMDOWN XM*** (3 digits) XM? XMUP XMDOWN XM**(PRESET No.) XM? XMMEM ? function XM Channel UP/DOWN --- ***:XM CH No. Return TFXM Status XM PRESET CH UP/DOWN , direct change to No.** example TFXMUP<CR> TFXMDOWN<CR> TFXM001<CR> (XM001 CH at XM) TFXM?<CR> TPXMUP<CR> TPXMDOWN<CR> TPXMA1<CR> (PRESET No.A1) TPXM?<CR> TPXMMEM<CR> XM?<CR>
Return TPXM Status XM PRESET MEMORY Return XM Status - CHANNEL NAME, ARTIST, TITLE, SIGNAL LEVEL

- 24 -

SIRIUS Control(North America model only)
COMMAND TF PARAMETER STUP STDOWN ST*** (3 digits) STPL**** (4 digits) ST? STUP STDOWN ST**(PRESET No.) ST? STMEM ? function SIRIUS Channel UP/DOWN --- ***:ST CH No. --- ***:Parental Lock Code Number Return TFST Status SIRIUS PRESET CH UP/DOWN , direct change to No.** example TFSTUP<CR> TFSTDOWN<CR> TFST001<CR> (ST001 CH at SIRIUS TUNER) TFSTPL1234<CR> (Parental Lock code 1234 TFST?<CR> TPSTUP<CR> TPSTDOWN<CR> TPSTA1<CR> (PRESET No.A1) TPST?<CR> TPSTMEM<CR> ST?<CR>

Return TPST Status SIRIUS PRESET MEMORY Return ST Status - CHANNEL NAME, ARTIST, COMPOSER,TITLE, SIGNAL LEVEL

- 25 -

HD RADIO Control(North America model only)
COMMAND TF PARAMETER HDUP HDDOWN HD****** (6 digits) HDMC* (1 digit) HD? HDUP HDDOWN HD** (PRESET No.) HD? HDMEM HDAM HDFM HD? HDAUTOHD HDAUTO HDMANUAL ? function HD Channel UP/DOWN , direct change --- ****.** kHz at AM band (>050000 is AM.) ****.** MHz at FM band (<050000 is FM.) ---HD Multi Cast CH Select(*:A:Analog) Return TFHD Status HD PRESET CH UP/DOWN , direct change to No.** example TFHDUP<CR> TFHDDOWN<CR> TFHD105000<CR> (1050.00kHz at AM) TFHDMC2<CR> TFHD?<CR> TPHDUP<CR> TPHDDOWN<CR> TPHDA1<CR> (PRESET No.A1) TPHD?<CR> TPHDMEM<CR> TMHDAM<CR> TMHDFM<CR> TMHD?<CR> TMHDAUTOHD<CR> TMHDAUTO<CR> TMHDMANUAL<CR> HD?<CR>
Return TPHD Status HD PRESET MEMORY HD RADIO BAND , MODE Select ---Band set to AM ---Band set to FM Return TMHD Status ---Tuning mode set to AUTO-HD mode ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode Return HD Status ---BAND, STATION NAME, STATION LONG NAME, MULTI CAST CURRENT, MULTI CAST PROGRAM SIGNAL LEVEL, ARTIST, TITLE,ALBUM, GENRE, PROGRAM TYPE, MODE

- 26 -

Network/iRadio/mServer/USB/Rhapsody/Napster/iPod Direct Extended Control
COMMAND SI Z2 Z3 Z4 SI Z2 Z3 Z4 NS PARAMETER USB USB USB USB IPD IPD IPD IPD 94 9A 9B 9C 9D 9E 9H 9I 9J 9K 9M 9X 9W 9Y Select INPUT source Select ZONE2 source Select ZONE3 source Select ZONE4 source Select INPUT source Select ZONE2 source Select ZONE3 source Select ZONE4 source Cursor Up Control Cursor Down Control Cursor Left Control Cursor Right Control Enter (Play/Pause) Control Play Control(iRadio/mServer/USB) Play/Pause Control(iPod Direct) Pause Control Play/Pause Control(iPod Direct) Stop Control Skip Plus Control Skip Minus Control Repeat One (USB/iPod DIRECT/mServer/Rhapsody/Napster) Repeat All (USB/iPod DIRECT/mServer/Rhapsody/Napster) Repeat Off (USB/iPod DIRECT/mServer/Rhapsody/Napster) Random On/Repeat ALL (USB/mServer/Rhapsody/Napster) Shuffle Songs Control (iPod Direct Only) Random Off (USB/mServer/Rhapsody/Napster) Shuffle Off Control (iPod Direct Only) Page Up Control Toggle Switch Browse Mode/Remote Mode Control (iPod Direct Only) Page Down Control function NET/USB and USB Start Playback NET/USB and USB Start Playback NET/USB and USB Start Playback NET/USB and USB Start Playback NET/USB and iPod Direct Start Playback NET/USB and iPod Direct Start Playback NET/USB and iPod Direct Start Playback NET/USB and iPod Direct Start Playback example SIUSB<CR> Z2USB<CR> Z3USB<CR> Z4USB<CR> SIIPD<CR> Z2IPD<CR> Z3IPD<CR> Z4IPD<CR> NS90<CR> NS91<CR> NS92<CR> NS93<CR> NS94<CR> NS9A<CR> NS9B<CR> NS9C<CR> NS9D<CR> NS9E<CR> NS9H<CR> NS9I<CR> NS9J<CR> NS9K<CR> NS9M<CR> NS9X<CR> NS9W<CR> NS9Y<CR>

- 30 -

Remote Lock/Panel Lock
COMMAND SY PARAMETER REMOTE LOCK ON REMOTE LOCK OFF PANEL LOCK ON PANEL+V LOCK ON PANEL LOCK OFF function REMOTE CONTROL LOCK ON/OFF PANEL BUTTON (Except MASTER VOL.)CONTROL LOCK ON PANEL BUTTON & MASTER VOL. CONTROL LOCK ON PANEL BUTTUM & MASTER VOL. CONTROL LOCK OFF example SYREMOTE LOCK ON<CR> SYREMOTE LOCK OFF<CR> SYPANEL LOCK ON<CR> SYPANEL+V LOCK ON<CR> SYPANEL LOCK OFF<CR>
UPGRADE ID Display COMMAND PARAMETER UG IDN
function ID Number for UPGRADE is displayed on FL Display

example UGIDN<CR>

- 31 -
EVENT(or RESPONSE) and PARAMETER list
EVENT PW MV PARAMETER ON STANDBY ** function POWER ON/STANDBY change MASTER VOLUME change , **:00 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 00 = -80dB 995 = -80.5dB 99 = ---(MIN) CHANNEL VOLUME change , **:00,38 to 62 by ASCII 62 = +12dB(MAX) 50 = 0dB 38 = -12dB(MIN) 00 = OFF (define ONLY SWch in DIRECT mode.) example PWON<CR> PWSTANDBY<CR> MV80<CR>
FL ** CVFL 50<CR> FR ** CVFR 50<CR> C ** CVC 50<CR> SW ** CVSW 50<CR> SL ** CVSL 50<CR> SR ** CVSR 50<CR> SBL ** (at SBch 2SP) CVSBL 50<CR> SBR ** (at SBch 2SP) CVSBR 50<CR> SB ** (at SBch 1SP) CVSB 50<CR> FHL ** CVFHL 50<CR> FHR ** CVFHR 50<CR> FWL ** CVFWL 50<CR> FWR ** CVFWR 50<CR> MU ON OUTPUT MUTE ON/OFF change MUON<CR> OFF MUOFF<CR> SI PHONO INPUT source change SIPHONO<CR> CD SICD<CR> TUNER SITUNER<CR> DVD SIDVD<CR> HDP SIHDP<CR> TV SITV<CR> SAT/CBL SISAT/CBL<CR> VCR SIVCR<CR> DVR SIDVR<CR> The PARAMETER of MV, CV EVENT : Uses two or three ASCII characters. (see page6 J) section) - 32 -

EVENT SI

PARAMETER V.AUX XM SIRIUS HDRADIO IPOD RHAPSODY NAPSTER IRADIO SERVER USB DIRECT IPOD DIRECT USB IPD FAVORITES ON OFF PHONO | IPOD SOURCE AUTO HDMI DIGITAL ANALOG EXT.IN AUTO PCM DTS
function (North America model Only) (North America model Only) (North America model Only) (North America model Only)
MAIN ZONE ON/OFF change REC SELECT source change ---The name of PARAMETER is the same as that of the time of SI COMMAND. REC SELECT mode cancel INPUT mode change
example SIV.AUX<CR> SIXM<CR> SISIRIUS<CR> SIHDRADIO<CR> SIIPOD<CR> SIRHAPSODY<CR> SINAPSTER<CR> SIIRADIO<CR> SISERVER<CR> SIUSB DIRECT<CR> SIIPOD DIRECT<CR> SIUSB<CR> SIIPD<CR> SIFAVORITES<CR> ZMON<CR> ZMOFF<CR> SRPHONO<CR>
---Set EXT.IN mode at AVR-4810 DIGITAL INPUT mode change
SRSOURCE<CR> SDAUTO<CR> SDHDMI<CR> SDDIGITAL<CR> SDANALOG<CR> SDEXT.IN<CR> DCAUTO<CR> DCPCM<CR> DCDTS<CR>

---5/7/9/11CH STEREO mode

- 36 -

PARAMETER NEURAL DOLBY D+ DOLBY D+ +EX DOLBY D+ +PL2X C DOLBY D+ +PL2X M DOLBY D+ +PL2Z H DOLBY TRUEHD DOLBY HD DOLBY HD+EX DOLBY HD+PL2X C DOLBY HD+PL2X M DOLBY HD+PL2Z H DTS HD DTS HD MSTR DTS HD+NEO:6 DTS HD+PL2X C DTS HD+PL2X M DTS HD+PL2Z H DTS ES 8CH DSCRT QUICK1 QUICK2 QUICK3 QUICK4 QUICK5 QUICK0

QUICK SELECT mode change

---QUICK 1(or 2, 3, 4, 5) Change User OFF
example MSNEURAL<CR> MSDOLBY D+<CR> MSDOLBY D+ +EX<CR> MSDOLBY D+ +PL2X C<CR> MSDOLBY D+ +PL2X M<CR> MSDOLBY D+ +PL2Z H<CR> MSDOLBY HD<CR> MSDOLBY HD<CR> MSDOLBY HD+EX<CR> MSDOLBY HD+PL2X C<CR> MSDOLBY HD+PL2X M<CR> MSDOLBY HD+PL2Z H<CR> MSDTS HD<CR> MSDTS HD MSTR<CR> MSDTS HD+NEO:6<CR> MSDTS HD+PL2X C<CR> MSDTS HD+PL2X M<CR> MSDTS HD+PL2Z H<CR> MSDTS ES 8CH DSCRT<CR> MSQUICK1<CR> MSQUICK2<CR> MSQUICK3<CR> MSQUICK4<CR> MSQUICK5<CR> MSQUICK0<CR>

- 37 -

EVENT VS
PARAMETER MONIAUTO MONI1 MONI2 ASPNRM ASPFUL SC48P SC10I SC72P SC10P SC10P24 SCAUTO SCH48P SCH10I SCH72P SCH10P SCH10P24 SCHAUTO AUDIO AMP AUDIO TV VST ON VST OFF
function HDMI MONITOR setting change
ASPECT setting change Resolution(analog) setting change
Resolution(HDMI) setting change
HDMI AUDIO Output setting change VERTICAL STRETCH setting change
example VSMONIAUTO<CR> VSMONI1<CR> VSMONI2<CR> VSASPNRM<CR> VSASPFUL<CR> VSSC48P<CR> VSSC10I<CR> VSSC72P<CR> VSSC10P<CR> VSSC10P24<CR> VSSCAUTO<CR> VSSCH48P<CR> VSSCH10I<CR> VSSCH72P<CR> VSSCH10P<CR> VSSCH10P24<CR> VSSCHAUTO<CR> VSAUDIO AMP<CR> VSAUDIO TV<CR> VSVST ON<CR> VSVST OFF<CR>

- 38 -

EVENT PS
PARAMETER TONE CTRL OFF TONE CTRL ON SB:MTRX ON SB:PL2X CINEMA SB:PL2X MUSIC SB:ON SB:OFF SB:ESDSCRT SB:ESMTRX CINEMA EQ.ON CINEMA EQ.OFF MODE:CINEMA MODE:MUSIC MODE:GAME MODE:PRO LOGIC MODE:HEIGHT FH:ON FH:OFF MULTEQ:AUDYSSEY MULTEQ:BYP.LR MULTEQ:FLAT MULTEQ:MANUAL MULTEQ:OFF DYNEQ ON DYNEQ OFF REFLEV 0 REFLEV 5 REFLEV 10 REFLEV 15 DYNVOL ON DYNVOL OFF DYNSET NGT DYNSET EVE DYNSET DAY
function TONE CONTROL ON/OFF change SURROUND BACK MODE change
CINEMA EQ. ON/OFF change CINEMA / MUSIC / GAME / PL /HEIGHT mode change
FRONT HEIGHT Output change MultEQ XT mode change
DYNAMIC EQ change Reference Level Offset change
DYNAMIC VOLUME change DYNAMIC VOLUME SETTING change
example PSTONE CTRL OFF<CR> PSTONE CTRL OFF<CR> PSSB:MTRX ON<CR> PSSB:PL2X CINEMA<CR> PSSB:PL2X MUSIC<CR> PSSB:ON<CR> PSSB:OFF<CR> PSSB:ESDSCRT<CR> PSSB:ESMTRX<CR> PSCINEMA EQ.ON<CR> PSCINEMA EQ.OFF<CR> PSMODE:CINEMA<CR> PSMODE:MUSIC<CR> PSMODE:GAME<CR> PSMODE:PRO LOGIC<CR> PSMODE:HEIGHT<CR> PSFH:ON<CR> PSFH:OFF<CR> PSMULTEQ:AUDYSSEY<CR> PSMULTEQ:BYP.LR<CR> PSMULTEQ:FLAT<CR> PSMULTEQ:MANUAL<CR> PSMULTEQ:OFF<CR> PSDYNEQ ON<CR> PSDYNEQ OFF<CR> PSREFLEV 0<CR> PSREFLEV 5<CR> PSREFLEV 10<CR> PSREFLEV 15<CR> PSDYNVOL ON<CR> PSDYNVOL OFF<CR> PSDYNSET NGT<CR> PSDYNSET EVE<CR> PSDYNSET DAY<CR>

- 39 -

PARAMETER DSX ON DSX OFF STW **
function DSX change DSX ON<CR> DSX OFF<CR> STW 50<CR>

example

STH **
BAS TRE DRC DRC DRC DRC DRC DCO DCO DCO DCO LFE EFF EFF EFF DEL AFD AFD PAN PAN DIM CEN CEI
** ** AUTO LOW MID HI OFF OFF LOW MID HIGH ** ON OFF ** *** ON OFF ON OFF ** ** **
STAGE WIDTH change **:00 to 99 by ASCII , 50=0dB ---AVR-4810 can be operated from -10 to 0(40 to 50) STH 50<CR> STAGE HEIGHT change **:00 to 99 by ASCII , 50=0dB ---AVR-4810 can be operated from -10 to 0(40 to 50) BASS change PSBAS 50<CR> TREBLE change PSTRE 50<CR> DRC change PSDRC AUTO<CR> PSDRC LOW<CR> PSDRC MID<CR> PSDRC HI<CR> PSDRC OFF<CR> D.COMP change PSDCO OFF<CR> PSDCO LOW<CR> PSDCO MID<CR> PSDCO HIGH<CR> LFE change PSLFE 10<CR> EFFECT change PSEFF UP<CR> PSEFF DOWN<CR> EFFECT LEVEL change PSEFF 10<CR> DELAY change PSDEL ***<CR> AFDM change PSAFD ON<CR> PSAFD OFF<CR> PANORAMA change PSPAN ON<CR> PSPAN OFF<CR> DIMMENSION change PSDIM **<CR> CENTER WIDTH change PSCEN 07<CR> CENTER IMAGE change PSCEI 10<CR>

- 40 -

PARAMETER ATT ON ATT OFF SWR ON SWR OFF RSZ S RSZ MS RSZ M RSZ ML RSZ L DELAY *** RSTR OFF RSTR MODE1 RSTR MODE2 RSTR MODE3 CN **
function SW ATT change SW ON/OFF change ROOM SIZE change
AUDIO DELAY change, ***:000 to 999 by ASCII --- AVR-4810 200=200ms MAX , 100=100ms, 000=0ms AUDIO RESTORER change
example PSATT ON<CR> PSATT OFF<CR> PSSWR ON<CR> PSSWR OFF<CR> PSRSZ S<CR> PSRSZ MS<CR> PSRSZ M<CR> PSRSZ ML<CR> PSRSZ L<CR> PSDELAY 200<CR> PSRSTR OFF<CR> PSRSTR MODE1<CR> PSRSTR MODE2<CR> PSRSTR MODE3<CR> PVCN 50<CR>

HUE **

DNR DNR DNR DNR ENH

OFF LOW MID HI **

CONTRAST change **:44 to 56 by ASCII , 50=0 ---AVR-4810 can be operated BRIGHTNESS Change **:00 to 12 by ASCII , 00=0 ---AVR-4810 can be operated CROMA LEVEL change **:44 to 56 by ASCII , 50=0 ---AVR-4810 can be operated Hue Change **:44 to 56 by ASCII , 50=0 ---AVR-4810 can be operated DNR change

from -6 to +6(44 to 56) PVBR 12<CR> from 0 to 12(00 to 12) PVCM 50<CR> from -6 to +6(44 to 56) PVHUE 50<CR> from -6 to +6(44 to 56) PVDNR PVDNR PVDNR PVHUE PVENH OFF<CR> LOW<CR> MID<CR> HI<CR> 12<CR>
ENHANCER change **:00 to 12 by ASCII, 00=0 ---AVR-4810 can be operated from 0 to 12(00 to 12) - 41 -

EVENT Z2

PARAMETER PHONO | USB DIRECT IPOD DIRECT SOURCE QUICK1 QUICK2 QUICK3 QUICK4 QUICK5 QUICK0 **
function ZONE2 source change ---The name of PARAMETER is the same as that of the time of SI COMMAND. ZONE2 mode cancel ZONE2 QUICK SELECT mode change
Z2MU Z2CS Z2CV Z2HPF Z2PS
ON OFF ON OFF ST MONO FL ** FR ** ON OFF BAS ** TRE **
---Z2 QUICK SELECT 1(or 2, 3, 4, 5) Change Quick QUICK SELCT OFF ZONE2 VOLUME change , **:00 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 00 = -80dB 99 = ---(MIN) ZONE2 ON/OFF change ZONE2 OUTPUT MUTE ON/OFF change ZONE2 Channel setting **:38 to 62 by ASCII , 50=0dB **:38 to 62 by ASCII , 50=0dB ZONE2 HPF ON/OFF change ZONE2 BASS change ---AVR-4810 can be ZONE2 TEBLE change ---AVR-4810 can be **:40 to operated **:40 to operated 60 by ASCII from -10 to 60 by ASCII from -10 to
example Z2PHONO<CR> | Z2USB DIRECT<CR> Z2IPOD DIRECT<CR> Z2SOURCE<CR> Z2QUICK1<CR> Z2QUICK2<CR> Z2QUICK3<CR> Z2QUICK4<CR> Z2QUICK5<CR> Z2QUICK0<CR> Z280<CR>
, 50=0dB +10(40 to 60) , 50=0dB Z2PSTRE 50<CR> +10(40 to 60)
Z2ON<CR> Z2OFF<CR> Z2MUON<CR> Z2MUOFF<CR> Z2CSST<CR> Z2CSMONO<CR> Z2CVFL 50<CR> Z2CVFR 50<CR> Z2HPFON<CR> Z2HPFOFF<CR> Z2PSBAS 50<CR>

- 42 -

EVENT Z2SLP

PARAMETER OFF 60 30

function ZONE2 SLEEP TIMER setting change
example Z2SLPOFF<CR> Z2SLP120<CR> Z2SLP90<CR> Z2SLP60<CR> Z2SLP30<CR>

EVENT Z3

function ZONE3 source change ---The name of PARAMETER is the same as that of the time of SI COMMAND. ZONE3 mode cancel ZONE3 QUICK SELECT mode change

Z3MU Z3CS Z3CV

ON OFF ON OFF ST MONO FL ** FR **
---Z3 QUICK SELECT 1(or 2, 3, 4, 5) Change Quick QUICK SELCT OFF ZONE3 VOLUME change , **:00 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 00 = -80dB 99 = ---(MIN) ZONE3 ON/OFF change ZONE3 OUTPUT MUTE ON/OFF change ZONE3 Channel setting **:38 to 62 by ASCII , 50=0dB **:38 to 62 by ASCII , 50=0dB - 43 -
example Z3PHONO<CR> | Z3USB DIRECT<CR> Z3IPOD DIRECT<CR> Z3SOURCE<CR> Z3QUICK1<CR> Z3QUICK2<CR> Z3QUICK3<CR> Z3QUICK4<CR> Z3QUICK5<CR> Z3QUICK0<CR> Z380<CR>
Z3ON<CR> Z3OFF<CR> Z3MUON<CR> Z3MUOFF<CR> Z3CSST<CR> Z3CSMONO<CR> Z3CVFL 50<CR> Z3CVFR 50<CR>

SIRIUS ARTIST NAME change
STARTIST High and mighty color <CR> STTITLE Memory Crysis <CR> STCOMPOSER High and mighty color <CR> STID 123456789012<CR> STSIGNAL STSIGNAL STSIGNAL STSIGNAL EXCELLENT<CR> GOOD<CR> WEAK<CR> NOSIGNAL<CR>

SIRIUS TITLE NAME change

SIRIUS COMPOSER NAME change
SIRIUS ID(SR000 Selected) SIRIUS ANTENNA SIGNAL STATUS change

- 47 -

EVENT TF PARAMETER HD****** (6 digits) HDMC*(1 digit) HD**(PRESET No.) function --- ****.** kHz at AM band (>050000 is AM.) ****.** MHz at FM band (<050000 is FM.) ---HD Multi Cast CH change(*:0 8,A:Analog) HD PRESET change to No.** HD RADIO BAND , MODE change ---Band set to AM ---Band set to FM ---Tuning mode set to AUTO-HD mode ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode HD STATION NAME change HD STATION LONG NAME change HD ANTENNA SIGNAL STATUS change example TPHD105000<CR> (1050.00kHz at AM) TFHDMC2<CR> TPHDA1<CR> (PRESET No.A1) TMHDAM<CR> TMHDFM<CR> TMHDAUTOHD<CR> TMHDAUTO<CR> TMHDMANUAL<CR> HDST NAME ********<CR> HDSTL NAME (56 digits)<CR> HDSIG HDSIG HDSIG HDSIG HDSIG HDSIG HDSIG HDMLT LEV 0<CR> LEV 1<CR> LEV 2<CR> LEV 3<CR> LEV 4<CR> LEV 5<CR> LEV 6<CR> CURRENT *<CR>
HDAM HDFM HDAUTOHD HDAUTO HDMANUAL ST NAME (8 digits) STL NAME (56 digits) SIG LEV * (1 digit)
MLT CURRENT * (1 digit) MLT CAST CH (8 digits) PTY(18 digits) ARTIST(40 digits) TITLE(40 digits) ALBUM(40 digits) GENRE(23 digits) MODE
HD MULTI CAST CURRENT CH change HD MULTI CAST CH change HD PROGRAM TYPE change HD HD HD HD HD ARTIST NAME change TITLE NAME change ALBUM NAME change GANRE change MODE(ANALOG/DIGITAL) - 48 -
HDMLT CAST CH ********<CR> HDPTY (18 digits)<CR> HDARTIST (40 digits)<CR> HDTITLE (40 digits)<CR> HDALBUM (40 digits)<CR> HDGENRE (23 digits)<CR> HDMODE ANALOG<CR>
Network/Rhapsody/Napster/USB/iPod Direct Extended Control
EVENT NSA 8 PARAMETER function Onscreen Display Information is Answered By the NSA Command. Display Line1 Information Display Line3 Information Display Line4 Information Display Line5 Information Display Line6 Information Display Line7 Information Display Line8 Information Display Line9 Information Display Line10 Information
NSA0**************_?????<CR> NSA1 ************_?????<CR> NSA2 ************_?????<CR> NSA3 ************_?????<CR> NSA4 ************_?????<CR> NSA5 ************_?????<CR> NSA6 ************_?????<CR> NSA7**************_?????<CR> NSA8**************_?????<CR> *:Character Length MAX96 _:Null ?:Exclusion(The character after Null should be disregarded) :Cursor&Playable Music Information Data(1Byte) Bit1:Playable Music =1 Bit2,3:Don't Care Bit4:CURSOR SELECT=1 Bit5,6,7,8:Don't Care <example> NSA0Now Playing USB_????<CR> NSA1 Come Away With Me_???<CR> NSA2 Norah Jones_?????????<CR> NSA3 _????????????????????<CR> NSA4 _????????????????????<CR> NSA5 00:11 100%_???????<CR> NSA6 _????????????????????<CR> NSA7_????????????????????<CR> NSA8_????????????????????<CR>

- 52 -

EVENT IPE 8 9
function Onscreen Display Information(iPod) is Answered By the IPA Command. Display Line1 Information Display Line3 Information Display Line4 Information Display Line5 Information Display Line6 Information Display Line7 Information Display Line8 Information Display Line9 Information Display Line10 Information Display Line11 Information
IPE0***************_???<CR> IPE1 *************_???<CR> IPE2 *************_???<CR> IPE3 *************_???<CR> IPE4 *************_???<CR> IPE5 *************_???<CR> IPE6 *************_???<CR> IPE7 *************_???<CR> IPE8#**************_???<CR> IPE9***************_???<CR> *:UTF-8 CODE Character(MAX95byte) _:Null ?:Exclusion(The character after Null should be disregarded) :Cursor Information Data(1Byte) Bit1:Playable Music=1 Bit2:Display Only=1 Bit3:Don't Care Bit4:CURSOR SELECT=1 Bit5-8:Don't Care # Bit1-8:Dont Care

- 53 -

EVENT IPE
function <example1> IPE0Artist??????????????????<CR> IPE1 Ana Caram_????????????<CR> IPE2 Badi Assad_???????????<CR> IPE3 Christy Baron_????????<CR> IPE4 Marta Gomez_??????????<CR> IPE5 Rebecca Pidgeon_??????<CR> IPE6 Sara K_???????????????<CR> IPE7 Valerie Joyce_????????<CR> IPE8# SFL Songs RPT All_???<CR> IPE9 [ 2/ 6]_?????????<CR> <example2> IPE0Now Playing iPod_???????<CR> IPE1 A HARD DAY'S NIGHT._??<CR> IPE2 /The Beatles_?????????<CR> IPE3 _??????????????????????<CR> IPE4 A HARD DAY'S NIGHT_???<CR> IPE5 00:04_??????????????<CR> IPE6 _??????????????????????<CR> IPE7 _??????????????????????<CR> IPE8# SFL Songs RPT All_???<CR> IPE9_??????????????????????<CR>

- 54 -

EVENT SY PARAMETER REMOTE LOCK ON REMOTE LOCK OFF PANEL LOCK ON PANEL+V LOCK ON PANEL LOCK OFF function REMOTE CONTROL LOCK ON/OFF PANEL BUTTON(Except MASTER VOL.)CONTROL LOCK ON PANEL BUTTON & MASTER VOL. CONTROL LOCK ON PANEL BUTTUM & MASTER VOL. CONTROL LOCK OFF example SYREMOTE LOCK ON<CR> SYREMOTE LOCK OFF<CR> SYPANEL LOCK ON<CR> SYPANEL+V LOCK ON<CR> SYPANEL LOCK OFF<CR>
UPGRADE ID Display COMMAND PARAMETER UG IDN ************ IDN NG
function ID Number for UPGRADE is displayed on FL Display ************:12-digit ID Number Cant get ID number from DPMS
example UGIDN ************<CR> UGIDN NG<CR>

- 55 -

New model information

AVR-4810

AV Surround Receiver
A/V surround receiver, lavishly endowed with technology and experience inherited from Denons high-end A/V components
Versatile and uncompromising upper class A/V surround receiver with 9 ch amplifier, network audio, photo streaming and more, for home entertainment enthusiasts

Features Key Features

HDMI full compatibility
- HDMI one cable connection (Analogue video to HDMI up conversion) to your HDTV - 6 x HDMI inputs (include 1 front panel) - Dolby TrueHD and DTS-HD Master Audio decoder - GUI
State-of-the-art Denon Solutions for Maximising Content Quality
Identical quality and power for all 9 channels, 140 W Dynamic Discrete Surround Circuit, D.D.S.C.-HD
- New triple 32-bit floating point high precision DSP processors - Advanced AL24 Processing Multi Channel provides more dynamic range - Differential D/A converters
HDMI clock control via DENON LINK 4th Clock jitter reducer available for all digital inputs Audyssey DSX processing Dolby Pro Logic IIz processing High bit i/p converter and scaler up to 1080p
- Multi cadence detection for SD and HD video signal - Digital noise reduction and enhancer
USB digital direct connection for iPod (audio only) Enhance network capability
- Wi-Fi (802.11 b/g compatible) - Internet Radio and network audio/photo streaming from PC/MAC, server - Napster online support (Napster Germany and Napster UK) - Party Mode - Web control - Firmware updates and upgrades
Sleep timer function High grade binding post speaker terminals for all channels
Stable power supply for high-quality sound and picture playback Compressed Audio Restorer to enhance digital music files Dolby TrueHD and DTS-HD Master Audio decoders Denons high picture quality circuitry, to enhance enjoyment of existing DVDs Analog to HDMI up-conversion, I/P converter and scaler on HDMI to HDMI Video digital noise reduction, to optimise effects for both SD and HD content Vertical stretch (supporting the CinemaScope aspect ratio) Minimum Signal Path for clear audio and video signal Direct Mechanical Ground Construction, embodying concepts for thorough vibration resistance Digital / analog separate windings Compressed Audio Restorer to enhance digital music files Pure Direct function
Connectivity & Future-ready Expandability
RadioTEXT with RDS Mass storage support USB for audio and photo playback (MTP compatible) 4 source / 4 zone capability Power amplifier, assign for zone 2 or 3 Bi-amp or Bi-wiring capability Zone 4 optical digital audio output Audio/video playback and control for iPod with optional dock (ASD-11R) 2way remote ready (optional: Denon RC-7000CI/RC-7001RCI) Zone 2 Component output USB digital direct connection for iPod (audio only)

Ease-of-use

Advanced GUI, superimposed on HDMI (up to 1080p) Dual HDMI outputs enabling simultaneous output to video projector and flat panel Audyssey Dynamic Volume, for real-time volume adjustment Audyssey Dynamic EQ selects the correct frequency response and surround volume levels on a moment by moment Audyssey MultEQ XT Auto setup and Room EQ 2-line fluorescent display on front panel Three Quick Select Buttons EL pre memory & learning remote control unit +zone remote control unit Auto surround mode Audio level memory, capable of correcting different signal levels for each input device Variable subwoofer crossover switching

Others

HDMI (ver.1.3a supporting HD audio decode/ Deep Color/ x.v.Color/ Auto Lipsync) (repeater) Support HDMI CEC Remote Installer Access via DPMS PC setup via Ethernet (Web setup) AMX, Crestron third party IP control support with RS-232C port 150mA Trigger output IR Remote in/out ports

Main Specifications

Power amplifier section Rated output Front L/R *THD figures are power amp stage values. 140 W + 140 W (8 ohms, 20 Hz - 20 kHz, THD 0.05 %) 180 W + 180 W (6 ohms, 1 kHz, THD 0.7%) Center 140 W (8 ohms, 20 Hz - 20 kHz, THD 0.05 %) 180 W (6 ohms, 1 kHz, THD 0.7%) Surround L/R 140 W + 140 W (8 ohms, 20 Hz - 20 kHz, THD 0.05 %) 180 W + 180 W (6 ohms, 1 kHz, THD 0.7%) Surround Back L/R 140 W + 140 W General Power supply Power consumption Dimensions (W x H x D) Front Height L/R (Front Wide) 140 W + 140 W (8 ohms, 20 Hz - 20 kHz, THD 0.05 %) 180 W + 180 W (6 ohms, 1 kHz, THD 0.7%) Weight AC 230 V, 50 Hz 910 W (Standby 0.1 W) 434 x 195 x 424 mm 42 lbs 2oz, 19.1 kg 180 W + 180 W (6 ohms, 1 kHz, THD 0.7%) AM section Tuning frequency range 522 - 1611 kHz Usable sensitivity (Front Height / Front Wide) (8 ohms, 20 Hz - 20 kHz, THD 0.05 %) 19 V FM section Tuning frequency range 87.5 - 108.0 MHz Usable sensitivity 1.0 uV (11.2 dBf) Preamplifier section Input sensitivity/impedance PHONO (MM) Audio inputs 2.5 mV 200 mV / 12 kohms
(except for EXT. IN [SW, S, SB], CD, PHONO, V. AUX)

In HDMI (included front 1) Component S-Video Composite (Video) Analog Audio (Tuner included) Analog EXT. Input Digital Optical Digital Coaxial Output level/Load impedance Audio outputs 1.2 V Out DENON LINK HDMI Monitor Component Monitor Component (Zone2) S-Video Monitor S-Video Composite Monitor Composite Composite (Zone2) Analog Audio REC Audio Preout (Zone2/ Zone3/ 7.3ch/ 4ch [F. Height /F. Wide]) Digital Optical Digital Optical (Zone4) Phones Others Microphone Port Dock Control Port FM Tuner Antenna AM Tuner Antenna Ethernet Wi-Fi Rod antenna USB (front panel or back panel) RS-232C Remote Control In/Out DC12V 150mA MAX. trigger out x6 x3 x7 x7 x 10 7.1ch x3 x3 x1 x2 x1 x1 x1 x2 x1 x2 x1 x2 x3 x1 x1 x1 x1 x1 x1 x1 x1 x1 x2 x1 1/1 x2

200 mV / 47 kohms

(EXT. IN [SW, S, SB], CD, PHONO, V. AUX)
*Premium silver version is also available.
*Design and specifications are subject to change without notice. *Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. *DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. *HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. *NSV is a registered trademark of Analog Devices, Inc. *Audyssey MultEQ XT is a registered trademark of Audyssey Laboratories. Audyssey Dynamic EQ is a trademark of Audyssey Laboratories. Audyssey Dynamic Volume is a trademark of Audyssey Laboratories. *Microsoft, Windows Media, Windows Vista, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. *HDCD, High Definition Compatible Digital and Microsoft are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Denon Brand Company

D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569, Japan www.denon.com

56990909 B