DUCATI MONSTER 1100/S (2009 - 2010)
SLIP-ON OPEN & SLIP-ON STRET LEGAL EXHAUST SYSTEM
SLIP-ON OPEN & SLIP-ON STREET LEGAL EXHAUST SYSTEM

DESCRIPTION

The Akrapovic SLIP-ON open and street legal exhaust system for the new Ducati 1100 Monster is an invincible combination of performance and price. In addition to performance, the twin hexagonal shaped titanium or carbon fiber mufflers add a clean racing look. Additionally, the Ducati will put out a much more powerful racing sound. You will also save 1.94 kg compared to the stock Ducati exhaust system. The SLIP-ON street legal system is homologated and ready for road use. PERFORMANCE Measurements of the Akrapovic SLIPON open system on the DUCATI 1100 Monster without muffler insert: Power & Torque: The Akrapovic SLIP-ON open system greatly increases the potential of the big twin cylinder engine. Both power and torque are increased over the entire rpm range, with the greatest increase shown in the middle and top of the range. We measured 89.59 HP at 7780 rpm, while the max. increased power of 3.16 HP was measured at 4350 rpm. That results in a much smoother ride as the biggest gain of power starts from 3500 rpm to 6000 rpm.

STOCK EXHAUST 90

AKRAPOVIC SLIP-ON EXHAUST

PERFORMANCE

max. rear wheel power HP / rpm
(measured on Dynojet ATV)

AKRAPOVIC

max. increased power

89.40 / 7730

89.59 / 7780

3.16 / 4350

WhlPwr

ADDITIONAL DATA

weight comparison (kg) stock 6.58 AKRAPOVIC SS link pipe 4.94 noise measurements (dB / rpm) legal for street use stock 92 / 3750 YES / NO TITANIUM link pipe difference stock - S.S. 1.94 AKRAPOVIC 92 / 3750 ; 96 / 3750 stock TITANIUM -

EngTrq

Technical specifications of Akrapovic exhaust systems and related products subject to change without notice.

5500 EngSpd RPM

Product code: (111077) S-D10SO4-ZC; (111075) S-D10SO4-ZT Open
(111076) S-D10SO4-HZC ; (111074) S-D10SO4-HZT Street legal
Akrapovi d.d. 2009 all rights reserved

13.04.2010

SLIP-ON OPEN EXHAUST SYSTEM
(P-HF394) MUFFLER BRACKET SET

SHEMATIC

DUCATI MONSTER 1100, Model year 2009 MONSTER 1100S, Model year 2009 MONSTER 696, Model year 2008-09
SLIP ON exhaust system/ OPEN
Product code: S-D10SO4-ZT S-D10SO4-ZC
(M-Z03702TL) TITANIUM OUTER SLEEVE MUFFLER - LEFT (M-Z03702CL) CARBON FIBER OUTER SLEEVE MUFFLER - LEFT (P-MCTZ23) CARBON FIBER CLAMP FOR TITANIUM OUTER SLEEVE MUFFLER (P-MCCZ23) CARBON FIBER CLAMP FOR CARBON FIBER OUTER SLEEVE MUFFLER (V-EC116) END CAP SET FOR TITANIUM OUTER SLEEVE MUFFLER LEFT (V-EC117) END CAP SET FOR CARBON FIBER OUTER SLEEVE MUFFLER LEFT (V-TUV098L) NOISE REDUCTION INSERT LEFT
(P-HSD10R3/A1) HEAT SHIELD WITH FITTING MATERIAL (P-HSA7) HEAT SHIELD
(L-D10SO3L) LINK PIPE LEFT
(L-D10SO3R) LINK PIPE RIGHT (P-S1) SPRING (V-TUV098) NOISE REDUCTION INSERT (P-HST2AL) STICKER (P-HF127) MUFFLER FITTING SET (V-EC94) END CAP SET FOR TITANIUM OUTER SLEEVE MUFFLER RIGHT (V-EC95) END CAP SET FOR CARBON FIBER OUTER SLEEVE MUFFLER RIGHT (P-MCTZ23) CARBON FIBER CLAMP FOR TITANIUM OUTER SLEEVE MUFFLER (P-MCCZ23) CARBON FIBER CLAMP FOR CARBON FIBER OUTER SLEEVE MUFFLER (M-Z03702T) TITANIUM OUTER SLEEVE MUFFLER (M-Z03702C) CARBON FIBER OUTER SLEEVE MUFFLER

Installation instructions
Akrapovi Exhaust Systems Slip-On for the Ducati Monster 1100 2009-2010 Ducati Monster 1100S 2009-2010 Ducati Monster 696 2008-2010 Ducati Monster 796 2010

*502335*

www.akrapovic.com
Congratulations on purchasing an Akrapovi exhaust system. Please read the entire installation manual prior to undertaking any activities related to installation of your new Akrapovi exhaust system. In case you do not fully understand the manual or any of its parts, please contact your authorized dealer! This product should be installed by someone with sufficient knowledge of exhaust systems and their installation, and appropriate hand or power tools. If you are not qualified for this work, please utilize a certified mechanic for installation. By installing Your Akrapovi exhaust system, you indicate that you have read the installation manual in its entirety and you agree with the terms stated herein. It is your responsibility to follow all installation instruction guidelines supplied with the Akrapovi exhaust system and undertake all necessary safety precautions. Akrapovi d.d. assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper operation, lack of responsible care, or all previously stated reasons resulting from incompatibility with other manufacturers products and/or systems. IMPORTANT INFORMATION Exclusion of Certain Liability 1. The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the Akrapovi exhaust system. When installing the Akrapovi exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature. 2. Akrapovi makes no representation or warranties with regard to damage caused by the improper installation, use and maintenance of the Akrapovi exhaust system. The warranty is limited to defects recognized by our technical department and due to normal use, and excludes items subject to normal wear (gaskets and damping wool). The guarantee is void in case of accident, modification, improper or competition use. 3. Do not attempt to install the Akrapovi exhaust system on a vehicle model for which it was not made or tested by Akrapovi. 4. When the exhaust system gets very hot during operation, be careful not to burn yourself on the exhaust system or parts which are in direct contact with it, even when the engine is not running. Also protect other people, especially children, from the injuries mentioned above. 5. In some cases Akrapovi exhaust system kits contain chemical products (ceramic anti-seizing grease; bolt sealant). Handle with care, do not inhale or swallow. Avoid excessive contact with skin, eyes or mucous membranes. Keep out of reach of children. 6. Technical specifications of Akrapovi exhaust systems and related products are subject to change without notice. 7. Before removing the original exhaust system from your vehicle, please compare the parts you received with the list of materials provided in the installation manual in order to assure that you have all the parts necessary for the installation of your new Akrapovi exhaust system. 8. Although this manual consists of instructions for installation in written form, as well as photographs and pictures representing individual steps of the installation, please note that the photographs and pictures are symbolic and are intended for representation of general overview only. The photographs and pictures contained herein should serve as a guideline only and actual installation of the exhaust system may not correspond with the photographs and pictures entirely. 9. The process of uninstalling the original exhaust system may vary depending on the existing exhaust system. Please follow the original exhaust system manufacturers instructions for uninstalling the original exhaust system. Trademarks The Akrapovi Exhaust System Technology logo is a registered trademark of Akrapovi d.d. Akrapovi website Information about Akrapovi exhaust systems and related products is available on the Akrapovi website at: http://www.akrapovic.com/ Copyright No part of the Akrapovi exhaust system or its documentation may be reproduced or distributed in any form or by any means without the prior written authorization of the Akrapovi company. Akrapovi, d.d. All rights reserved.

Symbols The following symbols are used throughout these installation instructions:

TOOLS REQUIRED

TIGHTENING TORQUE

INSTALLATION TIP

CAUTION OR WARNING
USE BOLT SEALANT; Apply 3 to 4 small drops of bolt sealant onto the cleaned and degreased threads before tightening the bolts. WARNING! Avoid contact with skin, eyes and mucous membranes. Do not inhale fumes. Keep out of reach of children. USE ANTI-SEIZE LEAD-FREE COPPER PASTE (black tube); Provides trouble-free and long-lasting protection against seizing, corrosion and rusting of bolts, threaded ends, nuts, joints, etc. Also protects against vibration, wear and impact. WARNING! Avoid eye contact. Avoid excessive skin contact. Keep out of reach of children. USE ANTI-SEIZING GREASE (white tube); Prevents seizing, corrosion and excessive wear between the titanium components of your exhaust system. WARNING! Avoid eye contact. Avoid excessive skin contact. Keep out of reach of children.
T-handle 8 mm wrench T-handle 12 mm wrench T-handle 12 mm swiveling wrench T-handle 6 mm three hexagon wrench Combination 12 mm wrench Spring puller
BEFORE INSTALLING, CHECK SCHEMATIC OF THE EXHAUST SYSTEM! IF ANY ITEMS IN THE AKRAPOVI EXHAUST SYSTEM PACKAGE ARE MISSING, PLEASE CONTACT YOUR AUTHORIZED DEALER. KEEP THE SCHEMATIC FOR FUTURE REFERENCE. THESE INSTALLATION INSTRUCTIONS MUST BE READ CAREFULLY IN ORDER TO ENSURE PROPER INSTALLATION AND OPERATION OF THE AKRAPOVI EXHAUST SYSTEM. THE EXHAUST SYSTEM CAN BE EXTREMELY HOT. ALLOW THE EXHAUST AND ENGINE TO COOL DOWN BEFORE BEGINNING INSTALLATION. WE ADVISE YOU TO LEAVE INSTALLATION TO A QUALIFIED SERVICEMAN. IMPROPER INSTALLATION MAY RESULT IN A SHORTER LIFETIME OF THE EXHAUST SYSTEM AND/OR DAMAGE TO THE VEHICLE.
REMOVAL OF STOCK EXHAUST SYSTEM: 1. Put the motorcycle on a side stand, we recommend a racing stand. Make sure, that surface is solid and at. 2. Unscrew the marked bolts from the mufflers chassis hanging brackets and remove the springs. Remove the mufflers off the motorcycle (Figure 1).

Figure 1

Unscrew the marked bolts and remove the stock muffler brakets (Figure 2).

Figure 2

INSTALLATION OF THE AKRAPOVI SLIP-ON EXHAUST SYSTEM: 1. Insert the catalyst into the link pipe. Put a presson nut on to the heat shield bracket and slide the link pipe with catalyst into the inlet side of the muffler and attach the springs. Repeat the process on both mufflers (Figure 3, 4). WARNING: make sure that you put the longer part of the catalyst into the link pipe!

Figure 3

Figure 4
Correctly position and install the Akrapovi muffler brackets (Figure 5). WARNING: use Akrapovi bolt sealant on the stock muffler brackets bolt threads!

22 Nm 16 ftlb

Figure 5
Correctly position the carbon-fiber clamps and slide them onto the mufflers - bear in mind the left offset of the carbon-fiber clamp viewed from the rear for right side and the right offset for the left side (Figure 6, 7). WARNING: open the clamps slightly wider than the diameter of the outer sleeve of the mufflers do not scrape them along the mufflers outer sleeve!

Figure 6

Figure 7
Position the mufflers correctly, slide them onto the outlet sides of the stock collector and attach the springs. Align the mufflers in respect to the motorcycle. Tighten the bolts on the carbon-fiber clamps/Akrapovi muffler brackets joints, using stock nuts, Akrapovi bolts and washers (Figure 8). WARNING: make sure, that springs pull the muffler all the way onto the link pipe use rubber mallet if necessary to tap the connections into place!

22Nm 16ftlb

Figure 8
Correctly position and install the Akrapovi carbon-fiber heat shield onto the link pipes. Make sure the heat resistant washers are correctly installed - use the bolts, washers and nuts supplied in the Akrapovi kit (Figure 9, 10, 11).

Figure 9

Figure 10

9.8Nm 7ftlb

Figure 11
Final installation: Clean grease spots: a. Muffler titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40 orequivalent). b. Muffler carbon-fiber outer sleeve: use a soft dry cloth. c. Slip-On with stainless steel link pipe: use a soft cloth sprayed with a contact cleaner, then wipe wit a soft dry cloth. Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the sticker. WARNING: make sure all the bolts are sufficiently tightened. In case the exhaust system touches the cowling or other parts repeat the adjustment of the exhaust system or contact your authorized dealer. WARNING: after running engine for 30 minutes, tighten the bolts of the Akrapovic carbon-fiber heat shield! IT IS NORMAL IF WHITE SMOKE COMES OUT OF THE MUFFLER ON FIRST OPERATION. DO NOT STAND BEHIND THE MUFFLER ON FIRST OPERATION. DO NOT USE AUTOMOTIVE WHEEL CLEANERS OR ANY CLEANING PRODUCTS WHICH CONTAIN ACIDIC ADDITIVES TO CLEAN AKRAPOVI EXHAUST SYSTEMS.

MAINTENANCE OF THE AKRAPOVI EXHAUST SYSTEM 1. Clean the titanium exhaust components with a multi-purpose spray lubricant (WD-40 or equivalent ), carbon fiber exhaust components with soft and dry cloth and stainless steel components with soft cloth sprayed with contact cleaner, then wipe with soft and dry cloth. A change in the color of the exhaust system is normal due to the high temperatures. 2. Periodically make sure all the bolts and springs are sufficiently tight.
DUCATI MONSTER 1100, MONSTER 1100S, MONSTER 696, MONSTER 796,
Model year 2009-2010 Model year 2009-2010 Model year 2008-2010 Model year 2010
SLIP ON exhaust system/ OPEN
Product code: S-D10SO4-ZT S-D10SO4-ZC
(P-HF394) MUFFLER BRACKET SET
(P-HSD10R3/A1) HEAT SHIELD WITH FITTING MATERIAL (M-Z03702TL) TITANIUM OUTER SLEEVE MUFFLER - LEFT (M-Z03702CL) CARBON FIBER OUTER SLEEVE MUFFLER - LEFT (P-MCTZ23) CARBON FIBER CLAMP FOR TITANIUM OUTER SLEEVE MUFFLER (P-MCCZ23) CARBON FIBER CLAMP FOR CARBON FIBER OUTER SLEEVE MUFFLER (V-EC116) END CAP SET FOR TITANIUM OUTER SLEEVE MUFFLER LEFT (V-EC117) END CAP SET FOR CARBON FIBER OUTER SLEEVE MUFFLER LEFT (V-TUV098L) NOISE REDUCTION INSERT LEFT (L-D10SO3L) LINK PIPE LEFT (P-HSA7) HEAT SHIELD

P-R12 STA

(L-D10SO3R) LINK PIPE RIGHT (P-S1) SPRING (V-TUV098) NOISE REDUCTION INSERT (P-HST2AL) STICKER (P-HF127) MUFFLER FITTING SET (V-EC94) END CAP SET FOR TITANIUM OUTER SLEEVE MUFFLER RIGHT (V-EC95) END CAP SET FOR CARBON FIBER OUTER SLEEVE MUFFLER RIGHT (P-MCTZ23) CARBON FIBER CLAMP FOR TITANIUM OUTER SLEEVE MUFFLER (P-MCCZ23) CARBON FIBER CLAMP FOR CARBON FIBER OUTER SLEEVE MUFFLER (M-Z03702T) TITANIUM OUTER SLEEVE MUFFLER (M-Z03702C) CARBON FIBER OUTER SLEEVE MUFFLER

P-X54 REAR LIGHT HOLDER

SLIP ON exhaust system/ STREET LEGAL
Product code: S-D10SO4-HZT S-D10SO4-HZC
(P-HSD10R3/A1) HEAT SHIELD WITH FITTING MATERIAL (M-HZ03702TL) TITANIUM OUTER SLEEVE MUFFLER - LEFT (M-HZ03702CL) CARBON FIBER OUTER SLEEVE MUFFLER - LEFT (P-MCTZ23) CARBON FIBER CLAMP FOR TITANIUM OUTER SLEEVE MUFFLER (P-MCCZ23) CARBON FIBER CLAMP FOR CARBON FIBER OUTER SLEEVE MUFFLER (V-EC116) END CAP SET FOR TITANIUM OUTER SLEEVE MUFFLER LEFT (V-EC117) END CAP SET FOR CARBON FIBER OUTER SLEEVE MUFFLER LEFT (V-TUV098L) NOISE REDUCTION INSERT LEFT (L-D10SO3L) LINK PIPE LEFT (P-HSA7) HEAT SHIELD