11. 12. 13.

F - TABLE DES MATIRES 1. Guidon suprieur 2. Attache cble 3. Ecrou (si applicable) 4. Bouton de Guidon 5. Rondelles 6. Boulons 7. Guidon infrieur 8. Chevilles de fixation 9. Raclette 10. Rondelles de rglage (Turbo Lite 330 - 1 monte sur la tondeuse et 2 dans les pices dtaches), (Turbo Lite 350/Turbo 400 - 1 monte sur la tondeuse et 3 dans les pices dtaches) 11. Manuel dInstructions 12. Etiquette davertissement 13. Plaquette des Caractristiques du Produit NL - INHOUD 1. Bovenstuk van duwboom 2. Snoerklem 3. Moer (indien van toepassing) 4. Knop voor duwboom 5. Pakkingring 6. Bout 7. Onderstuk van duwboom 8. Bevestigingspin 9. Moersleutel/schraapinstrument 10. Snijhoogte-tussenstukken (Turbo Lite 330 - 1 in grasmaaimachine en 2 in pak met losse onderdelen), (Turbo Lite 350/Turbo 400 - 1 in grasmaaimachine en 3 in pak met losse onderdelen) 11. Handleiding 12. Waarschuwingsetiket 13. Product-informatielabel
11. 12. 13. DK 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
- INDHOLD vre hndtag Kabelklemme Mtrik (hvis relevant) Hndtagsknop Spndeskive Bolt Nedre hndtag Hndtagsstift Skruengle/skrabevrktj Afstandsskiver til indstilling af klippehjde (Turbo Lite 330 - 1 monteret p plneklipperen og 2 lse i posen) (Turbo Lite 350/Turbo 400 - 1 monteret p plneklipperen og 3 lse i posen) 11. Brugsvejledning 12. Advarselsmrkat 13. Produktets mrkeskilt
(GB) (D) (F) (NL) (N) (SF) CARTON CONTENTS KARTONINHALT CONTENU DU CARTON INHOUD KARTONGEN INNEHOLDER PAKETIN SISLT (DK) (E) (P) (S) FRPACKNINGENS INNEHLL KARTONINDHOLD CONTENIDO DEL CARTON LEGENDAS DOS DESENHOS (I) (HU) (PL) (CZ) (SK) (SL) CONTENUTO A DOBOZ TARTALMA ZAWARTO KARTONU OBSAH KRABICE OBSAH BALENIA VSEBINA KATLE

SAFETY PRECAUTIONS

If not used properly this lawnmower can be dangerous! This lawnmower can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this lawnmower. The operator is responsible for following the warning and safety instructions in this manual and on the lawnmower.
Explanation of Symbols on the Turbo Lite 330/350/Turbo 400 The operator or user is responsible for accidents or hazards occurring to other people or their property. Electrical 1. The use of a Residual Current Device (R.C.D.) with a tripping current of not more than 30mA is recommended. Even with a R.C.D. installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it. 2. Before use, examine cable for damage, replace it if there are signs of damage or ageing. 3. Do not use the lawnmower if the electric cables are damaged or worn 4. Immediately disconnect from the mains electricity supply if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the electrical supply has been disconnected. Do not repair a cut or damaged cable. Replace it with a new one. 5. Your extension cable must be uncoiled, coiled cables can overheat and reduce the efficiency of your mower. 6. Keep cable away from lawnmower, always work away from the power point mowing up and down, never in circles. 7. Do not pull cable around sharp objects. 8. Always switch off at the mains before disconnecting any plug, cable connector or extension cable. 9. Switch off, remove plug from mains and examine electric supply cable for damage or ageing before winding cable for storage. Do not repair a damaged cable, replace it with a new one. Use only Flymo replacement cable. 10. Always wind cable carefully, avoiding kinking. 11. Never carry the product by the cable. 12. Never pull on the cable to disconnect any of the plugs. 13. Use only on AC mains supply voltage shown on the product rating label. 14. Our products are double insulated to EN60335. Under no circumstance should an earth be connected to any part of the product. Cables Use only 1.00mm2 size cable up to 30 metres length maximum. Maximum rating: 1.00mm2 size cable 10 amps 250 volts AC 1. Mains cables and extensions are available from your local Electrolux Outdoor Products Approved Service Centre. 2. Only use extension cables specifically designed for outdoor use. Preparation 1. Do not mow barefoot or in open sandals. Always wear suitable clothing, gloves, and stout shoes. 2. Make sure the lawn is clear of sticks, stones, bones, wire and debris; they could be thrown by the blade. 4.

Warning

Read the user instructions carefully to make sure you understand all the controls and what they do.
Always keep the lawnmower on the ground when mowing. Tilting or lifting the lawnmower may cause stones to be thrown out
Keep bystanders away. Do not mow whilst people especially children or pets are in the mowing area
Switch off! Remove plug from mains before adjusting, cleaning or if cable is entangled or damaged. Keep the cable away from the blade.
Beware of severing toes or hands. Do not put hands or feet near a rotating blade.
Blade continues to rotate after the machine is switched off. Wait until all machine components have completely stopped before touching them.
Do not mow in the rain or leave the lawnmower outdoors while raining
General 1. Never allow children or people unfamiliar with these instructions to use the mower. Local regulations may restrict the age of the operator. 2. Only use the lawnmower in the manner and for the functions described in these instructions. 3. Never operate the lawnmower when you are tired, ill or under the influence of alcohol, drugs or medicine.

ENGLISH - 1

3. Before using the machine and after any impact, check for signs of wear or damage and repair as necessary. Replace worn or damaged blades together with their fixings in sets to preserve balance. on the motor. 13. Do not tilt lawnmower when the motor is running, except when starting and stopping. In this case, do not tilt more than absolutely necessary and lift only the part which is away from the operator. Always ensure that both hands are in the operating position before returning the appliance to the ground. 14. Never pick up or carry a mower when it is operating or still connected to the mains supply. 15. Remove the plug from the mains : before leaving the mower unattended for any period; before clearing a blockage; before checking, cleaning or working on the appliance; if you hit an object. Do not use your lawnmower until you are sure that the entire lawnmower is in a safe operating condition.; if the lawnmower starts to vibrate abnormally. Check immediately. Excessive vibration can cause injury. Maintenance and storage 1. Keep all nuts, bolts and screws tight to be sure the lawnmower is in safe working condition. 2. Replace worn or damaged parts for safety. 3. Only use the replacement blade, blade bolt, spacer and impeller specified for this product. 4. Be careful during adjustment of the lawnmower to prevent entrapment of the fingers between moving blades and fixed parts of the machine.

Use 1. Use the lawnmower only in daylight or good artificial light. 2. Avoid operating your lawnmower in wet grass, where feasible. 3. Take care in wet grass, you may lose your footing. 4. On slopes, be extra careful of your footing and wear non-slip footwear. 5. Mow across the face of slopes, never up and down. 6. Exercise extreme caution when changing direction on slopes. Walk never run. 7. Mowing on banks and slopes can be dangerous. Do not mow on banks or steep slopes. 8. Do not walk backwards when mowing, you could trip. 9. Never cut grass by pulling the mower towards you. 10. Switch off before pushing the mower over surfaces other than grass. 11. Never operate the lawnmower with damaged guards or without guards in place. 12. Keep hands and feet away from the cutting means at all times and especially when switching

ASSEMBLY

A1 - lower handle A2 - slots A3 - fixing pin Fitting the Lower Handles to Your Lawnmower (A) 1. Place the end of the lower handle into the slots. 2. Secure lower handles to hood by firmly pushing fixing pin through holes in hood and handle. 3. Repeat on the other side. NOTE Should a problem occur when securing handle to hood with the fixing pin, carefully lever fixing pin out of location and repeat steps 1 to 3 above. B1 - lock off button, B2 - nut (if applicable) B3 - handle knob, B4 - washer, B5 - bolt Fitting Upper Handles to Lower Handles (B) 1. Ensure the upper handle is located correctly with the lock-off button on the switchbox uppermost. 2. Ensure the upper handle and the lower handle are aligned correctly. 3. Insert the nut into the handle knob. (if applicable) 4. Fit the bolts, washers and handle knobs. 5. Fit the cable to the handles with the clips provided. Make sure the cable is not trapped between the upper and lower handles.

HANDLE ADJUSTMENT

WARNING! STOP THE LAWNMOWER AND WAIT UNTIL THE BLADE HAS STOPPED ROTATING BEFORE ADJUSTING THE HANDLE. NOTE! REMOVAL OF LOWER HANDLE FIXING PINS IS NOT REQUIRED TO ADJUST THE HANDLE ADJUST THE HANDLE (C) Hold handle as illustrated. Take the weight of the handle with your right hand..then grip the lower part of the handle with your left hand..and pull the lower handle towards you with your left hand. Move to forward or down position as required. HANDLE IN FORWARD POSITION Follow procedure described in "TO ADJUST THE HANDLE" and push handle forward until it stops. HANDLE IN DOWN POSITION Follow procedure described in "TO ADJUST THE HANDLE" and move handle downward until it stops. NOTE - The handle does not rest flat on the ground. HANDLE IN OPERATING POSITION Adjustment is not required to move the handle to the operating position Simply pull down from the forward position or lift up from the down position until the handle is in the most comfortable operating position.

TO 1. 2. 3. 4. 5.

ENGLISH - 2

STARTING AND STOPPING

To Start your Lawnmower 1. Connect female extension cable connector to the back of the switchbox (D). 2. Form loop in mains cable and push the loop through the slot as illustrated in picture (E) 3. To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (F). 4. Connect plug to mains and switch on. 5. To prevent a ring being cut in your lawn and to clear any residual grass in the collection chute, tilt your lawnmower slightly (G). The switchbox is provided with a lock-off button (H1) to prevent accidental starting. 6. Press and hold the lock-off button (H) on the switchbox, then squeeze one of the Start/Stop levers towards the upper handle (H). 7. Continue to squeeze the start/stop lever towards the upper handle and release the lockoff button. When the lawnmower has reached full speed gently lower it onto the lawn. NOTE There are two start/stop levers fitted. Either one can be used for starting the lawnmower. IMPORTANT Do not use the start/stop levers intermittently Stop your Lawnmower To prevent a ring being cut in your lawn and to clear any residual grass in the collection chute, tilt your lawnmower slightly (G). Release the pressure on the Start/Stop lever.

HOW TO MOW

1. Start mowing the edge of the lawn nearest to the power point so the cable is laid out on the lawn you have already cut. (J) Cut your grass twice a week during the growing season, your lawn will suffer if more than a third of its length is cut at one time. Do Not Overload Your Mower Mowing long thick grass may cause the motor speed to drop, you will hear a change in the motor sound. If the motor speed drops you may overload your lawnmower which may cause damage. When mowing in long thick grass a first cut with the cutting height set higher will help reduce the load. See Adjusting the Cutting Height.
ADJUSTING THE CUTTING HEIGHT
Always handle the blade with care - sharp edges could cause injury. USE GLOVES. Never use more than 3 Cutting Height Spacers for the Turbo Lite 330 OR 4 Cutting Height Spacers for the Turbo Lite 350/Turbo 400. Spacers must only be fitted between the blade and the fan and NEVER between the blade and the bolt. 1. 2. Remove the blade bolt, and blade as described in Removing the Blade and Fan. For a Lower Cut - Add spacers to a maximum of 3 for Turbo Lite 330, or 4 for Turbo Lite 350/Turbo 400. For a Higher Cut - Take spacers away. Refit the blade as described in Fitting the Blade and Fan.

REMOVING AND FITTING THE BLADE AND FAN
K1 - Blade Bolt K2 - Blade K3 - Spacers K4 - Fan Removing the Blade and Fan 1. To remove the blade bolt, hold the fan firmly and with the spanner provided loosen the blade bolt by turning it anti-clockwise (L). 2. Remove the blade bolt, blade, spacers and fan. 3. Inspect for damage and clean as necessary. Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner regardless of condition. Fitting the Blade and Fan If the blade is cracked or damaged replace it with a new one. Never use a blade bolt if the insulated head is damaged cracked or missing. 1. Ensure the fan is located correctly. 2. Place the spacers onto the fan ensuring the pegs have located into the holes. 3. Place the blade onto the spacers ensuring the pegs have located into the holes on the blade and ensuring the blade is positioned as illustrated in Figure M. 4. Place the blade bolt through the centre hole of the blade.(M) 5. Tighten down clockwise by hand. 6. Hold the fan firmly and tighten the blade bolt with the spanner provided.

SERVICE RECOMMENDATIONS

Your product is uniquely identified by a silver and black product rating label. We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.

ENGLISH - 3

CARING FOR YOUR LAWNMOWER
Cleaning (USE GLOVES) (N) It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the hood could become a potential fire hazard. 1. Remove grass from under the hood with a piece of wood or similar. 2. Using a soft brush - remove grass clippings from all air intakes. 3. Remove the blade, see Figure L, to gain access to the fan and clean with a soft brush. 4. Wipe over the surface of your lawnmower with a dry cloth. IMPORTANT: Never use water for cleaning your lawnmower. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts. At the End of the Mowing Season 1. Replace blade, bolts, nuts or screws, if necessary. 2. Clean your lawnmower thoroughly. 3. Ask your local Service Centre to clean the air filter thoroughly and carry out any service or repairs required. 4. Make sure that the electric cable is coiled properly. Carrying your Lawnmower Ensure the blade is facing away from you. Storing your Lawnmower Store in a dry place where your lawnmower is protected from damage.

FAULT FINDING HINTS

Fails to Operate 1. Is the Power Turned On? 2. Check the fuse in the plug, if blown replace. 3. Fuse continues to blow? Immediately disconnect from the mains electricity supply and consult your local approved Service Centre. Poor Flotation 1. Disconnect from the mains electricity supply. 2. Clean the underside of the hood and the fan blades. 3. Raise to a higher height of cut. See Adjusting the Height of Cut. 4. If poor flotation persists? Disconnect from the mains electricity supply and consult your local approved Service Centre. Excessive Vibration 1. Disconnect from the mains electricity supply. 2. Check that the blade is fitted correctly? 3. If the blade is damaged or worn, replace it with a new one. 4. If vibration persists? Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.
GUARANTEE AND GUARANTEE POLICY
If any part is found to be defective due to faulty manufacture within the guarantee period, Electrolux Outdoor Products, through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing: (a) The fault is reported directly to the Authorised Repairer. (b) Proof of purchase is provided. (c) The fault is not caused by misuse, neglect or faulty adjustment by the user. (d) The failure has not occurred through fair wear and tear. (e) The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Electrolux Outdoor Products. (f) The machine has not been used for hire. (g) The machine is owned by the original purchaser. (h) The machine has not been used outside of the country for which it was specified. (i) The machine has not been used commercially. * This guarantee is additional to, and in no way diminishes the customers statutory rights. Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine: Failures not covered by guarantee * Replacing worn or damaged blades * Failures as a result of not reporting an initial fault. * Failures as a result of sudden impact. * Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual. * Machines used for hire are not covered by this guarantee. * The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim: Blades, Electric Mains cable. * Caution! Electrolux Outdoor Products does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Electrolux Outdoor Products, or by the machine having been modified in any way.

ENVIRONMENTAL INFORMATION
Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products life. Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling. Awareness of the environment must be considered when disposing of end-of-life product. If necessary, contact your local authority for disposal information.

ENGLISH - 4

BELGIQUE/BELGI
Flymo Belgique/Belgi Tel: 0311, Fax: 0391 Electrolux, spol. s.r.o., oz Electrolux Outdoor Products, Na Keku 365, Praha 10 - Horn Mcholupy. Tel: 02/7847 0164, Info-linka: 0800/Internet: www.partner-flymo.cz E-mail: info@husqvarna.cz Electrolux Outdoor Products, Flymo/Partner A/S, Lundtoftegaardsvej 93A, DK 2800 Kgs.Lyngby Tel: 75 77, Fax: 33 08, www.flymo-partner.dk Flymo Deutschland Tel: 7640, Fax:764202 Electrolux Estonia Ltd (Electrolux Eesti AS) Tel: (372) 6650010 Flymo France SNC Tel 67 8141, Fax Electrolux Outdoor Products Finland Tel: 9 39611, Fax: 2644 McCulloch Italiana s.r.l. - Via Como 72, 23868 Valmadrera (LECCO) - ITALIA Tel: 800 017829, Fax: Flymo Ireland Tel: 01 4565222, Fax: Electrolux Lehel Kft Tel: Flymo/Partner, div. av Electrolux Motor a.s. Tel: Flymo Nederland Tel: 0172-468322, Fax: 0172-468219 Husqvarna-Ges.m.b.H. Nfg. KG, Industriezeile 36, 4010 LINZ, Tel: 0732 770101-0, Fax: 0732 770101-40, email: office@husqvarna.co.at Internet: www.husqvarna.at Electrolux Poland Sp. z.o.o. Husqvarna, 01-612 Warszawa Myslowicka 10/2 Tel:- (22) 8332949 Husqvarna-Ges.m.b.H. Nfg. KG, Industriezeile 36, 4010 LINZ, Tel: 0732 770101-0, Fax: 0732 770101-40, email: office@husqvarna.co.at Internet: www.husqvarna.at Electrolux Slovakia s.r.o., Borova Sihot 211, Lipt. Hradok Tel: 14 19, Fax: 14 18, www.flymo-partner.sk Flymo Schweiz/Suisse/Suizzera Tel / 25, Fax / 35 Electrolux Outdoor Products, Sverige Tel: 67 00, Fax: Electrolux Outdoor Products United Kingdom Tel: 01325 300303, Fax: 01325 310339

ESK REPUBLIKA

DANMARK

DEUTSCHLAND

ESTONIA

FRANCE

FINLAND SUOMI

ITALIA

IRELAND

MAGYARORSZG

NEDERLAND

STERREICH

POLSKA

SLOVENIJA

SLOVENSKA

SCHWEIZ/SUISSE/SUIZZERA

SVERIGE

UNITED KINGDOM

Electrolux Outdoor Products Aycliffe Industrial Park NEWTON AYCLIFFE Co.Durham DL5 6UP ENGLAND Telephone - (00) 300303 Fax - (00) 310339 UK Telephone - Fax - 01325 310339
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and trademarks in several countries. Electrolux Outdoor Products Ltd. Registered Office, Electrolux Works, Oakley Road, Luton LU4 9QQ Registered number 974979 England
The Electrolux Group. The worlds No.1 choice.
The Electrolux Group is the worlds largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.

5119252-02

Turbo Lite

Original Instructions

FO T IN AN O RT re use ce I M P befo feren e re ead futur R for retain &

N AT I O RM

Carton Contents Safety
IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:Husqvarma UK Ltd. Customer Service Department direct Telephone : 4558 UK 350 ROI Fax : 01325 302530

cable clip x 2

upper handle
bolt x 2 nut x 2 washer x 2

plastic handle knob x 2

electric cable with moulded on plug lower handle
fixing pin x 2 instruction manual

spanner/scraper tool

cutting height spacers (Turbo Lite 330 - 1 fitted to lawnmower & 2 in loose parts pack) (Turbo Lite 350/400 - 1 fitted to lawnmower & 3 in loose parts pack)
If not used properly this product can be dangerous! This product can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this product. The operator is responsible for following the warning and safety instructions in this manual and on the product. Explanation of Symbols on your product Switch off! Remove plug from mains before adjusting, cleaning or if cable is entangled or damaged. Keep the cable away from the blade. Beware of severing toes or hands. Do not put hands or feet near a rotating blade.

Warning

Read the user instructions carefully to make sure you understand all the controls and what they do.
Always keep the product on the ground when mowing. Tilting or lifting the lawnmower may cause stones to be thrown out. Keep bystanders away. Do not operate whilst people especially children or pets are in the mowing area.
General 1. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product. Local regulations may restrict the age of the operator. 2. Never allow children or people unfamiliar with these instructions to use the product. 3. Stop using the machine while people, especially children, or pets are nearby. 3. Only use the product in the manner and for the functions described in these instructions. 4. Never operate the product when you are tired, ill or under the influence of alcohol, drugs or medicine. 5. The operator or user is responsible for accidents or hazards occurring to other people or their property. Electrical 1. The British Standards Institute recommend the use of a
Keep the cable supply away from the blade.

2. 3. 4.

Residual Current Device (R.C.D.) with a tripping current of not more than 30mA. Even with a R.C.D. installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it. Before use, examine cable for damage, replace it if there are signs of damage or ageing. Do not use the product if the electric cables are damaged or worn Immediately disconnect from the mains electricity supply if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the electrical supply has been disconnected. Do not repair a cut or damaged cable. Replace it with a new one. Your extension cable must be uncoiled, coiled cables can overheat and reduce the efficiency of your product. Keep cables away from the blade. The blade can cause damage to cables and lead to contact with live parts. Always work away from the power point mowing up and down, never in circles.
7. Always switch off at the mains before disconnecting
any plug, cable connector or extension cable. 8. Switch off, remove plug from mains and examine electric supply cable for damage or ageing before winding cable for storage. Do not repair a damaged cable, replace it with a new one. Use only Flymo replacement cable. 9. Always wind cable carefully, avoiding kinking. 10.Never carry the product by the cable. 11.Never pull on the cable to disconnect any of the plugs. 12.Use only on AC mains supply voltage shown on the product rating label. 13.Flymo products are double insulated to EN60335. Under no circumstances should an earth be connected to any part of the product. Preparation 1. While using your product always wear substantial footwear and long trousers. 2. Make sure the lawn is clear of sticks, stones, bones, wire and debris; they could be thrown by the blade. 3. Before using the product and after any impact, check for signs of wear or damage and repair as necessary. 4. Replace worn or damaged blades together with their fixings in sets to preserve balance. Use 1. Use the product only in daylight or good artificial light. 2. Do not operate the product whilst people, especially children or pets are in the area. 3. Avoid operating your product in wet grass, where feasible. 4. Take care in wet grass, you may lose your footing. 5. On slopes, be extra careful of your footing and wear non-slip footwear. 6. Operate across the face of slopes, never up and down. 7. Exercise extreme caution when changing direction on slopes. Walk never run. 8. Operating on banks and slopes can be dangerous. Do not operate on banks or steep slopes. 9. Use extreme caution when reversing or pulling the product towards you. 10.Switch off before pushing the product over surfaces other than grass. 11.Never operate the product with damaged guards or CABLES IMPORTANT Use only 1.00mm2 size cable up to 40 metres length maximum. Maximum rating : 1.00mm2 size cable, 10 amps 250 volts AC. THE TURBO LITE 330 IS SUPPLIED WITH CABLE WIRED DIRECTLY INTO THE PRODUCT. THE TURBO LITE 350/400 IS SUPPLIED WITH AN ELECTRIC MAINS CABLE FITTED WITH A FEMALE CONNECTOR 1. Flymo Mains Cables and Extension Cables are available from your local Approved Service Centre. 2. Do not wire an extension cable directly to your product yourself. Please contact your local Approved Service Centre for further information on the connectors and kits available. 3. Only use extension cables specifically designed for outdoor use. CONNECTORS IMPORTANT Flymo connectors are suitable for use with 2 core cable only. Under no circumstances should these connectors be used for earthed products. All Flymo connectors and cables are of splashproof construction. They are not waterproof and must not be left outside permanently nor should they be submerged or immersed in water. Do not let cable lay or trail through pools of water or splashed with water from hose pipes. MAINS PLUG REPLACEMENT IMPORTANT If the plug supplied is cut off it should be destroyed.

without guards in place. 12.Switch on the motor according to instructions and with feet well away from the blade(s). Do not put hands or feet near or under rotating parts. 13.Do not tilt product when the motor is running, except when starting and stopping. In this case, do not tilt more than absolutely necessary and lift only the part which is away from the operator. Always ensure that both hands are in the operating position before returning the product to the ground. 14.Never pick up or carry the product when it is operating or still connected to the mains supply. 15.Remove the plug from the mains : - before touching the blade (ensure the blade has come to a complete stop.): - before leaving the product unattended for any period; - before clearing a blockage; - before checking, cleaning or working on the product; - if you hit an object. Do not use your product until you are sure that the entire product is in a safe operating condition.; - if the product starts to vibrate abnormally. Check immediately. Excessive vibration can cause injury. Maintenance and storage 1. Caution: Do not touch rotating blade. 2. Keep all nuts, bolts and screws tight to be sure the lawnmower is in safe working condition. 3. Replace worn or damaged parts for safety. 4. Only use the replacement blade, blade bolt, spacers and impeller specified for this product. 5. Be careful during adjustment of the product to prevent entrapment of the fingers between moving blades and fixed parts of the machine. 6. If, during the life of the product, the belt begins to slip, return the product to an Authorised Service Dealer for maintenance. 7. Store in a cool, dry place and out of reach of children. Do not store outdoors. 8. Allow the product to cool for at least 30 minutes before storing. There is an electric shock hazard if a cut off plug is inserted into a 13 amp socket. No earth required. Flymo products are double insulated to EN60335 and under no circumstances should an earth be connected to any part of the product. Ensure the mains voltage suits your product IMPORTANT! The wires in the mains lead are coloured in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE The wire which is coloured BLUE must be connected to the Terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the Terminal which is marked with the letter 'L' or coloured RED. It is important that the outer sheath is clamped correctly into the 3-pin plug. If in doubt consult your local Service Repairer or qualified electrician before the machine is used. A 13 Amp fuse must be fitted to the Mains Plug. The normal plug fuse and household fuse only protect the electrical equipment and are not a safeguard against electrocution.

4. 5. 6. 7.

If your product is hard wired i.e. non-detachable mains electric cable, a conversion kit and extension cable is available from all Approved Service Centres which can be found in your local Yellow Pages.

Assembly A

lower handle Fitting the Lower Handles to Your Lawnmower (A) slots 1. 2. 3. fixing pin Place the end of the lower handle into the slots. Secure lower handles to hood by firmly pushing fixing pin through holes in hood and handle. Repeat on the other side. NOTE Should a problem occur when securing handle to hood with the fixing pin, carefully lever fixing pin out of location and repeat steps 1 to 3 above.
Fitting Upper Handles to Lower Handles (B) lock-off button 1. 2. Ensure the upper handle is located correctly with the lock-off button on the switchbox uppermost. Ensure the upper handle and the lower handle are aligned correctly.
Insert the nut into the handle knob (B1).
Fit the bolts, washers and handle knobs (B2). Fit the cable to the handles with the clips provided. Make sure the cable is not trapped between the upper and lower handles (B3).

Handle Adjustment C

WARNING! STOP THE LAWNMOWER AND WAIT UNTIL THE BLADE HAS STOPPED ROTATING BEFORE ADJUSTING THE HANDLE. NOTE! REMOVAL OF LOWER HANDLE FIXING PINS IS NOT REQUIRED TO ADJUST THE HANDLE
TO ADJUST THE HANDLE (C) 1. Hold handle as illustrated. 2. Take the weight of the handle with your right hand. 3.then grip the lower part of the handle with your left hand. 4.and pull the lower handle towards you with your left hand. 5. Move to forward or down position as required. HANDLE IN FORWARD POSITION Follow procedure described in "TO ADJUST THE HANDLE" and push handle forward until it stops. HANDLE IN DOWN POSITION Follow procedure described in "TO ADJUST THE HANDLE" and move handle downward until it stops. NOTE The handle does not rest flat on the ground.

PULL LOWER HANDLE

HANDLE IN OPERATING POSITION Adjustment is not required to move the handle to the operating position Simply pull down from the forward position or lift up from the down position until the handle is in the most comfortable operating position.

Starting and Stopping D

To Start your Lawnmower 1. Connect female extension cable connector to the back of the switchbox. (Turbo Lite 350/400 only) (D) 2. Form loop in mains cable and push the loop through the slot as illustrated in picture (E) 3. To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (F). 4. Connect plug to mains and switch on. 5. Move handle to the mowing position. 6. To prevent a ring being cut in your lawn, tilt your lawnmower slightly (G). The switchbox is provided with a lock-off button (H1) to prevent accidental starting. 7. Press and hold the lock-off button (H1) on the switchbox, then squeeze one of the Start/Stop levers towards the upper handle (J). 8. Continue to squeeze the start/stop lever towards the upper handle and release the lock-off button. 9. When the lawnmower has reached full speed gently lower it onto the lawn. NOTE There are two start/stop levers fitted. Either one can be used for starting the lawnmower. IMPORTANT Do not use the start/stop levers intermittently To Stop your Lawnmower 1. To prevent a ring being cut in your lawn, tilt your lawnmower slightly (G). 2. Release the pressure on the Start/Stop lever.

How to Mow K

1. Start mowing the edge of the lawn nearest to the power point so the cable is laid out on the lawn you have already cut. (K) 2. Cut your grass twice a week during the growing season, your lawn will suffer if more than a third of its length is cut at one time. Do Not Overload Your Mower Mowing long thick grass may cause the motor speed to drop, you will hear a change in the motor sound. If the motor speed drops you may overload your lawnmower which may cause damage. When mowing in long thick grass a first cut with the cutting height set higher will help reduce the load. See Adjusting the Cutting Height.
Adjusting the Cutting Height L
blade bolt blade cutting height spacers Always handle the blade with care - sharp edges could cause injury. USE GLOVES. Never use more than 3 Cutting Height Spacers for the Turbo Lite 330 OR 4 Cutting Height Spacers for the Turbo Lite 350/400. Spacers must only be fitted between the blade and the fan and NEVER between the blade and the bolt. 1. Remove the blade bolt, and blade as described in Removing the Blade and Fan. 2. For a Lower Cut - Add spacers to a maximum of 3 for Turbo Lite 330, or 4 for Turbo Lite 350/400.(L) 3. For a Higher Cut - Take spacers away. 4. Refit the blade as described in Fitting the Blade and Fan.
Removing the Blade and Fan M To remove the blade bolt, hold the fan firmly and with
the spanner provided loosen the blade bolt by turning it anti-clockwise (M). Remove the blade bolt, blade, spacers and fan. Inspect for damage and clean as necessary. Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition.

2. 3.

Fitting the Blade and Fan
1. 2. 3. If the blade is cracked or damaged replace it with a new one. Never use a blade bolt if the insulated head is damaged cracked or missing. Ensure the fan is located correctly. Place the spacers onto the fan ensuring the pegs have located into the holes. Place the blade onto the spacers ensuring the pegs have located into the holes on the blade and ensuring the blade is positioned as illustrated in Figure N. Place the blade bolt through the centre hole of the blade.(N) Tighten down clockwise by hand. Hold the fan firmly and tighten the blade bolt with the spanner provided.

4. 5. 6.

Turbo Lite 330

Turbo Lite 350/400

Cleaning (USE GLOVES) (P) It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the hood could become a potential fire hazard. 1. Remove grass from under the hood with a piece of wood or similar. 2. Using a soft brush - remove grass clippings from all air intakes. 3. Remove the blade, see Figure M, to gain access to the fan and clean with a soft brush. 4. Wipe over the surface of your lawnmower with a dry cloth. IMPORTANT Never use water for cleaning your lawnmower. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts. At the End of the Mowing Season 1. Replace blade, bolts, nuts or screws, if necessary. 2. Clean your lawnmower thoroughly. 3. Ask your local Service Centre to clean the air filter thoroughly and carry out any service or repairs required. 4. Make sure that the electric cable is coiled properly. Carrying your Lawnmower Ensure the blade is facing away from you. Storing your Lawnmower Store in a dry place where your lawnmower is protected from damage.

Caring for your Lawnmower P

Fault Finding Hints

Fails to Operate 1. Is the Power Turned On? 2. Check the fuse in the plug, if blown replace. 3. Fuse continues to blow? Immediately disconnect from the mains electricity supply and consult your local approved Service Centre. Poor Flotation 1. Disconnect from the mains electricity supply. 2. Clean the underside of the hood and the fan blades. 3. Raise to a higher height of cut. See Adjusting the Height of Cut. 4. If poor flotation persists? Disconnect from the mains electricity supply and consult your local approved Service Centre. Excessive Vibration 1. Disconnect from the mains electricity supply. 2. Check that the blade is fitted correctly? 3. If the blade is damaged or worn, replace it with a new one. 4. If vibration persists? Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.

Service Recommendations

1. We strongly recommend that your product is serviced at least every twelve months, more often in a professional application. Always use genuine Flymo Spare Parts. Prepacked spares are available from most Husqvarma UK Ltd. stockists. Your product is uniquely identified by a silver and black product rating label If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label. Should it be necessary for work to be carried out by your Service Centre, it is important to take your complete machine including cable and any extension cables used. A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your Flymo product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase. All of the centres listed stock genuine Flymo Spare Parts. NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Husqvarma UK Ltd. in any manner whatsoever.

2. 3. 4. 5.

Guarantee & Guarantee Policy
If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarma UK Ltd., through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing: (a) The fault is reported directly to the Authorised Repairer. (b) Proof of purchase is provided. (c) The fault is not caused by misuse, neglect or faulty adjustment by the user. (d) The failure has not occurred through fair wear and tear. (e) The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarma UK Ltd. (f) The machine has not been used for hire. (g) The machine is owned by the original purchaser. (h) The machine has not been used commercially. * This guarantee is additional to, and in no way diminishes the customers statutory rights. Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine: Failures not covered by guarantee * Replacing worn or damaged blades * Failures as a result of not reporting an initial fault. * Failures as a result of sudden impact. * Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual. * Machines used for hire are not covered by this guarantee. * The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim: Blades, Electric Mains cable. * Caution! Husqvarma UK Ltd. does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Husqvarma UK Ltd., or by the machine having been modified in any way

Environmental Information
Husqvarma UK Ltd. are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products life. Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling. Awareness of the environment must be considered when disposing of end-of-life product. If necessary, contact your local authority for disposal information. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product.

Replacement Parts

Blade TL330 TL350 TL400 Reference no.: Reference no.: Reference no.: FLY007 FLY008 FLY048 Part no.: Part no.: Part no.: 511864790
EC Declaration of Conformity
Husqvarna AB, 561 82, Huskvarna, Sweden Declare under our sole responsibility that the product(s); Category..Electric Rotary Lawnmower Type(s)..TL330, TL350, TL400 Identification of Series.See Product Rating Label Year of Construction..See Product Rating Label Conforms to the essential requirements & provisions of the following EC Directives: 98/37/EC (until 28.12.09), 2006/42/EC (from 29.12.09), 2004/108/EC, 2000/14/EC based on the following EU harmonized standards applied: EN60335-1, EN60335-2-77, EN836, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3 The maximum A weighted sound pressure level LpA at the operators position, recorded on a sample of the above product(s) corresponds to the Level given in the table. The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above product(s) corresponds to the Value ah given in the table. 2000/14/EC: The Measured Sound Power LWA & Guaranteed Sound Power LWA values are according to the tabulated figures. Conformity Assessment Procedure.. Annex VI Notified Body.. Intertek, Cleeve Road Leatherhead, Surrey KT22 7SB, England Newton Aycliffe 19/11/2009 M.Bowden Research & Development Director Husqvarna UK Ltd. Keeper of technical documentation

Type Width of Cut (cm) Speed of Rotation of Cutting Device (rpm) Power (kW) Measured Sound Power LWA (dB(A)) Guaranteed Sound Power LWA (dB(A)) Level (dB(A)) Value ah (m/s2) Uncertainty K of ah (m/s2) Weight (Kg)
TL6,300 1.96 82.4 0.801 1.5 6.5
TL4,100 1.96 85.7 5.44 1.5 7.5
TL4,100 1.95 82.7 1,22 1.5 7.5
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Copyright 2008 Flymo S.A. All rights reserved. Flymo and other product and feature names are registered or unregistered trademarks of Flymo S.A.
Husqvarna AB, Huskvarna, Sweden

5055314-03