3rd Byte vvH :0H-fH(ch.1 - ch.16) :00H - 7fH(0 - 127) 0 - 63 =OFF, 64 - 127=ON
n=MIDI channel number vv = Control Value

Default = 00H

Soft Pedal Status BnH

2nd Byte 43H

Sound controllers #3-6 Status BnH BnH BnH BnH

2nd Byte 48H 49H 4aH 4bH

3rd Byte vvH vvH vvH vvH :0H-fH(ch.1 - ch.16) :00H - 7fH(0 - 127)
Release time Attack time Cutoff Decay time

Default = 40H

Common Effect Status BnH BnH BnH

2nd Byte 5bH 5cH 5dH

3rd Byte vvH ss vvH :0H-fH(ch.1 - ch.16) :00H - 7fH(0 - 127)
Reverb depth Rotary speaker speed (0-63: Slow, 64-127: Fast) Only when rotary speaker selected Effect depth
NRPN MSB/LSB Status BnH BnH

2nd Byte 63H 62H

n=MIDI channel number :0H-fH(ch.1 - ch.16) mm=MSB of the NRPN parameter number ll=LSB of the NRPN parameter number NRPN numbers implemented in MP9500 are as follows NRPN # Data MSB LSB MSB Function & Range 01H 20H mmH Cutoff offset mm:0eH - 40H - 72H(-50 - 0 +50) 01H 63H mmH Attack time offset mm:0eH - 40H - 72H(-50 - 0 +50) Decay time offset mm:0eH - 40H - 72H(-50 - 0 +50) Release time offset mm:0eH - 40H - 72H(-50 - 0 +50)

01H 64H

01H 66H
* Ignoring the LSB of data Entry * It is not affected in case of modifying cutoff if tone does not use the dcf. RPN MSB/LSB Status BnH BnH

2nd Byte 65H 64H

3rd Byte mmH llH :0H-fH(ch.1 - ch.16)
n=MIDI channel number mm=MSB of the RPN parameter number ll=LSB of the RPN parameter number
RPN number implemted in MP9500 are the followings RPN # Data MSB LSB MSB Function & Range 00H 00H mmH Pitch bend sensitivity mm:00H - 07H(0 - 7 half tone) ll:Ignored(as 00H) 00H 01H mmH Master fine tuning mm,ll:00 00H - 40 00H - 7f 7f (-8192x100/8192 - 0 +8192x100/8192 cent) Default = 02H

00H 02H

Master coarse tuning mm:28H - 40H - 58H(-24 - 0 - +24 half tone) ll:Ignored(as 00H)
7fH 7fH Program Change Status CnH

RPN NULL

2nd Byte ppH :0H-fH(ch.1 - ch.16) :00H - 7fH(Prog#1 - prog#128) :10H - 7fH(prog#1) 0 - 3fH Single 40H - 7fH Multi Default = 00H

n=MIDI channel number pp=Program number
Pitch Bend Change Status EnH

2nd Byte llH

3rd Byte mmH :0H-fH(ch.1 - ch.16) :- 7f 7fH(-8192 - 0 - +8192)
n=MIDI channel number mm,ll=Pitch bend value

Default = 40 00H(center)

1.2 Channel Mode Message
All Sound OFF Status BnH 2nd Byte 78H 3rd Byte 00H :0H-fH(ch.1 - ch.16)
n=MIDI channel number All Note Off Status BnH

2nd Byte 7bH

3rd Byte 00H :0H-fH(ch.1 - ch.16)

n=MIDI channel number

1.3 System Real time Message
Active sensing Status FEH

2.Transmitted Data

2.1 Channel Voice message
Note off Status 9nH 2nd Byte kkH 3rd Byte 00H :0H-fH(ch.1 - ch.16) :00H - 7fH(0 - 127)
n=MIDI channel number kk=Note Number Note on Status 9nH
n=MIDI channel number kk=Note Number vv=Velocity Control Change Bank Select Status BnH BnH

2nd Byte 00H 20H

3rd Byte mmH llH :0H-fH(ch.1 - ch.16) :00H - 7fH(0 - 127) :00H - 7fH(0 - 127)
n=MIDI channel number mm=Bank Number MSB ll=Bank Number LSB

Modulation Status BnH

n=MIDI channel number :0H-fH(ch.1 - ch.16) mm,ll=Value indicated in RPN/NRPN, see RPN/NRPN chapter :00H - 7fH(0 - 127) Volume Status BnH
n=MIDI channel number vv = Expression

Damper Pedal Status BnH

3rd Byte vvH :0H-fH(ch.1 - ch.16) 00H - 7fH(0 - 127) 0 - 63 =OFF, 64 - 127=ON

3rd Byte vvH vvH vvH vvH

n=MIDI channel number vv = Control Value Common Effect Status BnH BnH BnH
:0H-fH(ch.1 - ch.16) vv:0eH - 40H - 72H(-50 - 0 +50)
n=MIDI channel number :0H-fH(ch.1 - ch.16) mm=MSB of the NRPN parameter number ll=LSB of the NRPN parameter number
RPN MSB/LSB States 2nd Byte 3rd Byte BnH 65H mmH BnH 64H IIH n=MIDI channel number :0H-fH(ch.1 - ch.16) mm=MSB of the RPN parameter number II=LSB of the RPN parameter number RPN number implemted in MP9500 are the followings RPN # Data MSB LSB MSB Function & Range 00H 00H mmH Pitch bend sensitivity mm:00H - 0ch(0 - 12 half tone) Default = 02H II:Ignored(as 00H) 7fH 7fH -RPN NULL

Program Change Status CnH
2nd Byte ppH :0H-fH(ch.1 - ch.16) :00H - 7fH
n=MIDI channel number pp=Program number After Touch Status DnH
n=MIDI channel number pp=Value *Sending only when EXP CC#=AFT Pitch Bend Change Status EnH
2.2 Channel Mode Message 2.3 System Real time Message

3. Exclusive data

MP9500 can receive these dump data, and also can transmit by the panel operation in Store switch.

3.1 Sys-EX FORMAT

a: Dump CURRENT Format: F<ch> 0C <DATA> F7 <ch>: MIDI ch (00~0F) <DATA>: Multi (Single) data in edit buffer or to edit buffer The structure of the one Multi (Single) patch (common DATA) + (Zone 1, 2, 3, 4 Int DATA) + (Zone 1, 2, 3, 4 Ext DATA) + (Only_for_Sound DATA) b: Block Dump 1 (Multi 1-31) Format: <ch>: F<ch> 0C 40 <DATA> F7 MIDI ch (00~0F)
<DATA>: All Multi 1~31 Multi 1-1, Multi 1-2, Multi 1-3. Multi 4-7, Multi 4-8 The structure of the one Multi patch (common DATA) + (Zone 1, 2, 3, 4 Int DATA) + (Zone 1, 2, 3, 4 Ext DATA) + (Only_for_Sound DATA) c: Block Dump 2 (Multi 32-64) Format: F<ch> 0C 41 <DATA> F7 <ch>: MIDI ch (00~0F) <DATA>: All Multi 1~31 Multi 5-1, Multi 5-2, Multi 5-3. Multi 8-7, Multi 8-8
The structure of the one Multi patch (common DATA) + (Zone 1, 2, 3, 4 Int DATA) + (Zone 1, 2, 3, 4 Ext DATA) + (Only_for_Sound DATA) d: Program change with Mode Change Format: F<ch> 0C <DATA> F7 <ch>: MIDI ch (00~0F) <DATA>: program no. 0~63: Single 64 64~127: Multi 64

3.2 Data Format

The structure of the one Multi (Single) patch (common DATA) + (Zone 1, 2, 3, 4 Int DATA) + (Zone 1, 2, 3, 4 Ext DATA) + (Only_for_Sound DATA)

3.2.1 Common DATA

No. PARAMETER part_sel both_sel 1 both_sel 2 both_sel 3 both_sel 4 transpose_sw transpose_value zone1_mode zone2_mode zone3_mode zone4_mode zone1_sw zone2_sw zone3_sw zone4_sw knob_mode eq1 eq2 eq3 eq4 efx_type efx_rate rev_type rev_rate Name 1st Name 2nd Name 3rd Name 4th Name 5th Name 6th Name 7th Name 8th VALUE 0-3 (Zone 1-4) 1, 2 (Int, Ext) 1, 2 (Int, Ext) 1, 2 (Int, Ext) 1, 2 (Int, Ext) 0, 1 (off, on) 40~64~86 (-24~0~+24) 0, 1, 2 (0:BOTH, 1:INT, 2:EXT) 0, 1, 2 (0:BOTH, 1:INT, 2:EXT) 0, 1, 2 (0:BOTH, 1:INT, 2:EXT) 0, 1, 2 (0:BOTH, 1:INT, 2:EXT) 0, 1 (0:off, 1:on) 0, 1 (0:off, 1:on) 0, 1 (0:off, 1:on) 0, 1 (0:off, 1:on) 0-3 (Effect, EQ, tone, CC#) 58~64~70 (-6~0~+6) 58~64~70 (-6~0~+6) 58~64~70 (-6~0~+6) 58~64~70 (-6~0~+6) 0~20 0~127 0~6 0~127 ASCII ASCII ASCII ASCII ASCII ASCII ASCII ASCII

3.2.2 Zone 1-4 Internal DATA
No. PARAMETER tone_no K.range_lo K.range_hi velo_sw_type velo_sw_value velo_sense transpose part_sw effect_sw reverb_sw damper_sw FSW_sw EXP_sw modwheel_sw bender_sw level_sw level panpot dummy finetune rev_send efx_send bend_range cutoff attack decay release voicing VALUE 0~63 0~127 (C-2~G8) 0~127 (C-2~G8) 0~2 (off, loud, soft) 0~127 0~64~127 (-64~0~+63) 28~64~100 (-36~0~+36) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0~127 1~64~127 (L63~0~R63) 64 1~64~127 (-63~0~+63) 0~127 0~127 0~7 14~64~114 (-50~0~+50) 14~64~114 (-50~0~+50) 14~64~114 (-50~0~+50) 14~64~114 (-50~0~+50) 0~3 (Normal, Mellow, Dynamic, Bright)
3.2.3 Zone 1-4 External DATA
No. 53 PARAMETER K.range_lo K.range_hi velo_sw_type velo_sw_value velo_sense transpose part_sw damper_sw FSW_sw EXP_sw modwheel_sw bender_sw tx_ch tx_prog_sw tx_prog_no tx_bank_sw tx_bank_lo tx_bank_hi tx_level_enable_sw tx_level_sw tx_level tx_knobA_sw tx_knobA_no tx_knobA_value tx_knobB_sw tx_knobB_no tx_knobB_value tx_knobC_sw tx_knobC_no tx_knobC_value tx_knobD_sw tx_knobD_no tx_knobD_value panpot dummy finetune rev_send efx_send bend_range cutoff attack decay release solo_sw solo_mode; tx_pan_sw; dummy tx_fine_sw; tx_bendrange_sw; tx_cutoff_sw; tx_attack_sw; tx_decay_sw; tx_release_sw; VALUE 0 ~ 127 (C-2 ~ G8) 0 ~ 127 (C-2 ~ G8) 0 ~ 2 (off, loud, soft) 0 ~ ~ 64 ~ 127 (-64 ~ 0 ~ +63) 28 ~ 64 ~ 100 (-36 ~ 0 ~ +36) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0 ~ 15 (1 ~ 16ch) 0,1 (off, on) 0 ~ 127(1 ~ 128) 0,1 (off, on) 0 ~ ~ 127 0, 1 (off, on) *use only single mode 0, 1 (off, on) 0 ~ 127 0,1 (off,on) 0 ~ ~ 127 0,1 (off, on) 0 ~ ~ 127 0,1 (off, on) 0 ~ ~ 127 0,1 (off, on) 0 ~ ~ ~ 64 ~ 127 (L63 ~ 0 ~ R63) ~ 64 ~ 127 (-63 ~ 0 ~ +63) 0 ~ ~ ~ ~ 64 ~ 114 (-50 ~ 0 ~ +50) 14 ~ 64 ~ 114 (-50 ~ 0 ~ +50) 14 ~ 64 ~ 114 (-50 ~ 0 ~ +50) 14 ~ 64 ~ 114 (-50 ~ 0 ~ +50) 0,1 (off, on) 0,1,2 (last, hi, lo) 0,1 (off, on) 0 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on) 0,1 (off, on)
3.2.4 Only for Sound DATA
The structure of Only for Sound single #1, single #2, single #3.. single #63, single #64 The format of one single No. cutoff attack decay release effect_sw efx_type efx_rate efx_send rev_type rev_rate rev_send voicing VALUE 14~64~114 (-50~0~+50) 14~64~114 (-50~0~+50) 14~64~114 (-50~0~+50) 14~64~114 (-50~0~+50) bit0:REV, bit1:EFX (off:0, on:1) 0~20 0~127 0~127 0~6 0~127 0~127 0~3 (Normal, Mellow, Dynamic, Bright)

4.Table

4.1 Control Change Number (CC#) table

CONTROL NUMBER CONTROL FUNCTION
Decimal 16-19 20-33-79 80-85-102-119 120-127
Hex A B C D E F 10-13 14-1F 20 21-3F 4A 4B 4C 4D 4E 4F 50-55-5A 5B 5C 5D 5E 5F 66-77 78-7F
Bank Select (MSB) Modulation wheel or lever Breath Controller Undefined Foot controller Portamento time Data entry (MSB) Channel Volume Balance Undefined Pan (Panpot) Expression Controller Effect Controller 1 Effect Controller 2 Undefined Undefined General Purpose Controller 1-4 Undefined Bank Select (LSB) LSB for value 1-31 Hold (Damper pedal, Sustain) Portamento on/off Sostenuto Soft pedal Legato Footswitch Hold2 sound controller1 (sound variation) sound controller2 (resonance) sound controller3 (release) sound controller4 (attack) sound controller5 (cutoff) sound controller6 (decay) sound controller7 (vibrato rate) sound controller8 (vibrato depth) sound controller9 (vibrato delay) sound controller10 (undefined ) General Purpose Controller 5-8 Portamento control Undefined Effect1 depth (Reverb send level) Effect2 depth Effect3 depth (Chorus send level) Effect4 depth Effect5 depth Data increment Data decrement NRPN LSB NRPN MSB RPN LSB RPN MSB Undefined Reserved for Channel Mode Message
5.MIDI Implementation Chart

5.1 MP9500

[STAGE PIANO] Model: KAWAI MP9500 Date: December 2001 Version: 1.0
MIDI Implementation Chart
Function Basic Channel Mode Note Number: Velocity Afer Touch Touch Pitch Bend Default Changed Default Messages Altered True voice Note ON Note OFF Keys Chs 0, 6, 93 98, 99 100, 101 0-114 Prog Change: System Exclusive Common System Real time True # : Song pos : Song sel : Tune : Clock : Commands : All Sound Off : Reset All Controller : Local ON/OFF : All Note OFF : Active Sense : Reset Notes Transmitted 1-16 1-16 Mode3 X ***** 0-127 ***** 1-127 X X O (*2) O O O O O O O O O O O O O O O O O O O (*1) O ***** O X X X X X X X X X O Recognized 1-16 1-16 Mode3 X 0-127 0-127 1-127 X X X O X O O O O O O O O O O O O O O O O X O 0-127 O X X X X X X O X O (123) O Bank Select Modulation Data Entry Volume Panpot Expression Hold1 Soft Release Attack Cutoff Decay Reverb depth Rotary slow/fast EFX depth NRPN LSB, MSB RPN LSB, MSB Remark

Control Change

Aux Messages
X X *1: assigned to EXP, FSW, Knob A-D *2: assigned to EXP Mode2: OMNI ON, MONO Mode4: OMNI OFF, MONO O: Yes X: No
Mode1: OMNI ON, POLY Mode3: OMNI OFF, POLY