NX-200/300

NEXEDGE VHF/UHF Digital & FM Portable Radios

GENERAL FEATURES

5 W (136-174 MHz) Models 5 W (400-470, 450-520 MHz) Models 512 CH-GID / 128 Zones 12-Key Keypad Models 14 Character Alphanumeric Aliases Backlit Dot Matrix LCD 3-Digit Sub-Display Function/Status LCD Icons RSSI Indicator Date & 12/24 Hour Time Clock Transmit/Busy/Call Alert/Warn LED On/Off Volume Knob 16-Position Mechanical Selector 6 Front PF & Menu Keys 2 Side PF Keys Emergency/AUX Key 500 mW Speaker Audio VOX Ready Emergency Call Features Emergency Man-Down Option Lone Worker Multi-Language Display Programmable TX/RX Indication (On/Off) Special Alert Tone Patterns Time Out Timer Busy Channel Lockout LCD Battery Status Indicator Low Battery Alert Battery Saver Weather-sealed ACC Connector MIL-Spec Speaker Mic Options KMC-38GPS Speaker Mic Option KPG-111D Windows FPU Flash Firmware Upgrading Front Panel Test & Tune Cloning MIL-STD-810 C/D/E/F MIL-STD Driven-Rain IP-54/55 Water & Dust Intrusion Easy Option Port PC Serial Interface SDM Manual Input1 Transparent Data Mode1 Intrinsically Safe Option VGS-1 Voice Guide/ Voice & GPS Data Storage Option Short & Long Data Messages1 GPS Location with Voice1 NXDN Scrambler Included (Conventional: per CH)
DIGITAL CONVENTIONAL MODE
64 Radio Access Numbers (RAN) DTMF (Encode/Decode) Individual & Group Selective Call Mixed FM/Digital Operation

DIGITAL TRUNKING MODE

Individual Private Call Group Call Broadcast Call Transmission Trunked Mode2 Message Trunked Mode2 Call Queuing with Priority2 Call Queue Pre-emption2 Late Entry (UID & GID)Priority Monitor IDs2 Remote Group Add1 Failsoft Mode Multi-Site IP Network Compatible
Single Zone / Multi-Zone / List Scan Dual Priority Scan (Conventional)

FM MODES GENERAL

25 & 12.5 kHz Channels FleetSync/II DTMF Encode / Decode Companded Audio Voice Inversion Scrambler Encryption/ANI Board Control

FM CONVENTIONAL ZONES

QT / DQT Two-Tone Decode Single/Two-Tone Encode Call Key 1-6 Operator Selectable Tone

FM LTR TRUNKED ZONES

Kenwood LTR Features

DIGITAL COMMON

NXDN Digital Air Interface AMBE+2 VOCODER 6.25 & 12.5 kHz Channels Over-the- Air Alias Paging Call Emergency Call All Group Call Status Messaging1 Remote Stun/Kill1 Remote Check1

FleetSync/II (FM)

PTT ID Digital ANI Selective Call & Group Call Status Messaging1 Emergency Status Caller ID Display Short Text Messages1 Power On/Off Status Messages1 Send/Display GPS (KMC-38GPS)1 PTT ID & Emergency GPS Reporting1 Status Message Block GPS Reporting1
http://nexedge.kenwood.com

Options

I KNB-47L

Li-Ion Battery (1950mAh)

I KMC-41M
MIL-STD & IP 54/55 Speaker Microphone

I KRA-22/23

VHF/UHF Helical Antenna

I KRA-28

VHF Broad Band Antenna

I KNB-48L

Li-Ion Battery (2550mAh)

I KMC-38GPS

KNB-48L

I KNB-50NC

GPS Speaker Microphone

I KRA-26/27

VHF/UHF Whip Antenna
Ni-MH Battery (2000mAh) Intrinsically Safe

I VGS-1 I KHS-11

Heavy Duty Earphone Voice Guide & Storage Unit

I KSC-32

Tri-Chemistry Rapid Rate Charger

I KRA-16/17

VHF/UHF Stubby Antenna

I KSC-326

Rapid Rate Six Unit Charger for Ni-Cd/Ni-MH/Li-ion

I KEP-1

Heavy Duty Earphone

I KRA-25

VHF High Gain Antenna

I KBH-11

Belt Clip (2.5")
All accessories and options may not be available in all markets. Contact an authorized Kenwood dealer for details and complete list of all accessories and options.

Main Specifications

NX-200 GENERAL
Frequency Range Type 1 Type 2 136-174 MHz 450-520 MHz 400-470 MHz

NX-300 RECEIVER

Digital @ 6.25kHz (3% BER) Digital @ 12.5kHz (3% BER) Analog (12 dB SINAD) Selectivity Analog @ 25 kHz Analog @ 12.5 kHz Intermodulation Distortion Analog Spurious Response Analog Audio Distortion Audio Output TRANSMITTER RF Power Output Spurious Response FM Hum & Noise Audio Distortion Modulation Sensitivity

NX-200

NX-300
Number of Channels Zones Max. Channels per Zone Channel Spacing

Analog Digital

Operating Voltage Battery Life ( with KNB-48L) 5-5-90 10-10-80 Operating Temperature Range Frequency Stability Antenna Impedance Dimensions (W x H x D) Projections not included Radio only with KNB-47L with KNB-48L Weight (net) Radio only with KNB-47L with KNB-48L FCC ID Type 1 Type 2 IC Certification Type 1 Type 2
250 12.5 / 15 / 25 / 30 kHz 12.5 / 25 kHz 6.25 / 12.5 kHz 6.25 / 12.5 kHz 7.5V DC 20% Approx. 14.5 hours Approx. 9.0 hours -22 F to +140 F (-30 C to +60 C) 2.0 ppm 1.0 ppm 50 2.28 x 5.02 x 1.63 in (58 x 127.5 x 41.3 mm) 2.28 x 5.02 x 1.63 in (58 x 127.5 x 41.3 mm) 2.28 x 5.02 x 1.91 in (58 x 127.5 x 48.5 mm) 8.82 oz (250 g) 13.23 oz (375 g) 14.29 oz (405 g) ALH378400 ALH378500 ALH378501 282D-378400 282D-378500 282D-378501
0.20 V 0.25 V 0.25 V 72 dB 65 dB 70 dB (50,100 kHz) 70 dB Less than 3% 500 mW / 8 5W/1W 70 dB 45 dB 40 dB Less than 3% 16K0F3E, 11K0F3E, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D
Analog @ 25 kHz Analog @ 12.5 kHz
Analog measurements made per TIA/EIA 603 and specifications shown are typical. Kenwood reserves the right to change specifications without prior notice or obligation. FleetSync is a registered trademark of Kenwood Corporation. LTR is a registered trademark of Transcrypt International. AMBE+2TM is a trademark of Digital Voice Systems Inc. Windows is a registered trademark of Microsoft Corporation. NXDN is a registered trademark of Kenwood Corporation and Icom Inc. NEXEDGE is a registered trademark of Kenwood Corporation.
Applicable MIL-STD & IP

MIL Standard

Low Pressure High Temperature Low Temperature Temperature Shock Solar Radiation Rain Humidity Salt Fog Dust Vibration Shock
MIL 810C Methods/Procedures
500.1/Procedure I 501.1/Procedure I, II 502.1/Procedure I 503.1/Procedure I 505.1/Procedure I 506.1/Procedure I, II 507.1/Procedure I, II 509.1/Procedure I 510.1/Procedure I 514.2/Procedure VIII, X 516.2/Procedure I, II, V IP54/55
MIL 810D Methods/Procedures
500.2/Procedure I, II 501.2/Procedure I, II 502.2/Procedure I, II 503.2/Procedure I 505.2/Procedure I 506.2/Procedure I, II 507.2/Procedure II, III 509.2/Procedure I 510.2/Procedure I 514.3/Procedure I 516.3/Procedure I, IV
MIL 810E Methods/Procedures
500.3/Procedure I, II 501.3/Procedure I, II 502.3/Procedure I, II 503.3/Procedure I 505.3/Procedure I 506.3/Procedure I, II 507.3/Procedure II, III 509.3/Procedure I 510.3/Procedure I 514.4/Procedure I 516.4/Procedure I, IV
MIL 810F Methods/Procedures
500.4/Procedure I, II 501.4/Procedure I, II 502.4/Procedure I, II 503.4/Procedure I, II 505.4/Procedure I 506.4/Procedure I, III 507.4 509.4 510.4/Procedure I, III 514.5/Procedure I 516.5/Procedure I, IV
footnotes from Front: Requires NX subscriber unit PC Serial Interface compatible software application (e.g Kenwood AVL & Dispatch Messaging software) or hardware (e.g. console). 2 These trunked features are primarily system programming and operational dependent. Priority Monitor also requires NX subscriber settings.
International Protection Standard
Dust & Water Protection
Kenwood has always connected with people through sound. Now we want to expand the world of sound in ways that only Kenwood can, listening to our customers and to the pulse of the coming age as we head toward a future of shared discovery, inspiration and enjoyment.

JQA-QMA1205

ADS#40209 Printed in USA