Nokia PC Suite 4.6 User Guide
and PC/PDA Connectivity Guide for Nokia 6385/6370 Phones

Legal notices

Part No. 9354445, Issue No. 1 Copyright 2002 Nokia. All rights reserved. Nokia, Nokia Connecting People, and Nokia Original accessories logos are trademarks or registered trademarks of Nokia Corporation. Printed in Canada August, 2002. Electronic document created in United States on April 4, 2003. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED AS IS. EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. TRADEMARKS Product names and/or brands mentioned herein are trademarks or registered trademarks of their respective holders. EXPORT CONTROLS This product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited. FCC/INDUSTRY CANADA NOTICE Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Table of Contents

1 Introduction.1
Observe system requirements. 1 Learn about compatible applications. 2 Understand requirements for digital data and fax calls. 2 Print this guide. 3 Observe abbreviations. 3 Observe safety notes. 3 Learn about infrared communications. 4
Nokia PC Suite Installation.5
Learn about IR for Me and XP users. 5 Install PC Suite. 6 Remove PC Suite. 8

Nokia Content Copier.9

Learn about compatible phones. 9 Learn about Content Copier. 10 Learn about other Nokia phones. 14

Nokia PC Composer.16

Tour PC Composer. 17 Compose a new ringing tone. 18 Learn about other PC Composer views. 20 Save your new ringing tone. 21 Transfer ringing tone to your phone. 21 Create ringing tones from MIDI files. 22 Work with RTTTL ringing tone files. 24

Nokia PC Sync.25

Configure PC Sync. 25 Understand the basics of synchronization. 29 Start synchronization. 30
Use the New Synchronization command.30 Create a custom contact list.31

Nokia Phone Editor. 35

Learn about phone memory and PC storage locations.35 Choose the right application for managing contacts.36 Tour Nokia Phone Editor and Contacts window.37 Manage contacts using Phone Editor.38 Edit Profiles and Caller groups.40 Edit Settings.42 Launch other PC suite applications.42

Wireless modem setup. 43

Learn about digital data.43 Understand modem software.46 Connect for the first time using DLR-3P or DKU-6.47 Connect for the first time using IR (Windows 98, Me).49 Create Additional modem installations.51 Learn about IR and Windows 2000.52 Connect for the first time: IR (Windows XP Home and Professional).55 Learn about IR and Windows NT Workstation 4.0.55

Enable infrared communications
Windows Millennium Edition (ME), Windows 2000, and Windows XP users do not need to enable infrared communications on their PC prior to using this feature. The infrared port is always active. If you use Windows 98, you can use the Infrared Control Panel to activate or deactivate infrared communications. To enable infrared communications on your phone, please refer to the infrared section in your phones user guide.
Interruptions to infrared communications
Windows provides visual and audible notification when it senses an interruption to infrared communications between your phone and PC. Windows allows you to re-establish infrared communications between the two devices so it can re-send the data that was being transferred when the interruption occurred.
TIME-OUT If the infrared connection between your phone and PC has not been reestablished within 15 seconds, a time-out occurs, meaning Windows no longer searches for your phone and terminates the infrared connection. [4]
Nokia PC Suite Installation
2 Nokia PC Suite Installation
Nokia PC Suite 4.6 is a collection of powerful tools that you can use to manage your phones features and data. PC Suite consists of the following components: Nokia Content Copier allows you to copy data between two Nokia phones, to back up your phones data to your PC, and erase data from your phone. Nokia Connection Manager allows you to monitor the serial connection between your phone and PC and switch to a different type of connection (cable vs. infrared) when copying data from one phone to another. Nokia PC Composer allows you to create new ringing tones for your phone. Nokia PC Sync allows you to synchronize contacts, calendar and todo list notes between your phone and PIM applications such as Microsoft Outlook and Lotus Organizer. Nokia Phone Editor allows you to edit your phone book and settings from your PC.
LEARN ABOUT IR FOR ME AND XP USERS
Your phone also functions as a wireless modem and is designed to be detected by Windows Plug and Play. During the PC Suite installation process, you are asked to choose how you want to connect your phone and PC - either via IR or serial cable. If you select IR, you are prompted to enable infrared communications on your phone, then align the infrared ports of the 2 devices.

Plug and Play detection

Because infrared is always active on PCs running ME or XP (including automatic software installation for Plug and Play devices), the Windows Add New Hardware Wizard detects your phone as a new hardware device during the PC Suite installation. This interferes with the PC Suite software installation process.
Before installing PC Suite

Change language

The language chosen during installation for PC Suite applies to all of the PC Suite components and Help applications. If you need to change PC Suite to a different language, you must reinstall PC Suite.

REMOVE PC SUITE

If you need to remove PC Suite (including all components), please use Add/Remove Programs (located in Control Panel). Remember to close any PC Suite applications that are running before you begin. TO REMOVE PC SUITE 4.6: 1 Click Start, point to Settings, then click Control Panel. Double-click Add/Remove Programs. Scroll through the list of installed applications, then click Nokia PC Suite 4.6. Click the Add/Remove button. Click Remove from the Nokia PC Suite Setup window, then click Next. Follow the on-screen instructions until the setup wizard has completed removing the program. Restart your computer to complete the removal process.

Nokia Content Copier

3 Nokia Content Copier
Nokia Content Copier is a powerful application that allows you to perform the following tasks: Copy data from a compatible phone to your 6385/6370 phone (or between 2 Nokia 6385/6370 phones). Back up your phones data to your PC and then restore the data back to your phone. Erase data from your phone.
LEARN ABOUT COMPATIBLE PHONES
One of the most powerful features of this application is its support of other compatible phones. This capability is especially useful if you are upgrading to a new handset and want to transfer data from your old phone to your new one. You can also use this application to transfer information between other 6385/6370 phones in your family. The table on the following page shows a list of phones compatible with Nokia Content Copier (other than 6370 or 6385), as well as the method of connection to the PC: [9]

Nokia model: 3320/3360

Method of connection: IR (infrared) DAU-9P serial cable DAU-9P serial cable DLR-3P serial cable and IR (infrared) DLR-3P serial cable and IR (infrared) IR (infrared) IR (infrared)
6340, 6360 7160, 7190 8290, 8890 8390
Important: Content Copier does not support copying data to any of the phones listed above. Data can only be read from these phones, then copied to a 6385 or 6370 phone. Note: Nokia Content Copier does not support certain 5100 and 6100 series phones. For more information on specific models of incompatible phones, please see Learn about other Nokia phones on page 14.

LEARN ABOUT CONTENT COPIER
Nokia Content Copier uses a wizard-style interface to help you perform the tasks listed above. If you are copying data from one of the compatible phones above using a cable connection, please make sure the phone is connected to your PC via cable before you begin.

[ 10 ]

Nokia Content Copier Launch Content Copier from the Start Menu (Start - Programs - Nokia PC Suite 4 - Content Copier), then select the task you would like to perform. Follow the on-screen instructions to complete the task you want to perform. The following pages contain basic information and tips on using Nokia Content Copier. Important: Windows ME and XP users who are connecting to a PC via IR should have already performed the wireless modem installation before installing PC Suite. If the Add New Hardware Wizard launches when you establish an IR connection between phone and PC, please click the wizards Cancel button. Close Content Copier, then proceed to Wireless modem setup on page 43 and follow the instructions. You can return to Content Copier once the modem setup has been completed.
Copy information from the source phone
When you select Copy data from a phone to a PC, Content Copier transfers all compatible data types (phone book, calendar, to-do, caller groups, etc.) from the phone containing the data you want to back up or transfer. This phone is called the source phone and can be one of the phones listed on the previous page, or another Nokia 6370 or 6385 phone. If you are copying your phones data and want to save it on your PC, Nokia Content Copier guides you through the process of saving the information to your PCs hard drive. If you are copying data from a different source to your Nokia 6370 or [ 11 ]
6385 phone, the data must first be saved to your PC. Once you have connected your 6370 or 6385 phone (target phone) via IR or cable, follow the instructions found below: Copy information to the target phone.
Save the source phone data
Once the source phones data has been read, Content Copier allows you to save the information to your PCs hard drive. Click the Save Data button, then navigate to the location on your hard drive where you want the information stored. Nokia Content Copier automatically names the files for you, based on the type of data that is read from the source phone.
Copy information to the target phone

Before you can copy information to the target phone, you need to load the information into the PCs memory. You should have already saved the source phones data to your PC via the Copy data from a phone to a PC option. Launch Content Copier, then click Next. Click Next, then click Copy data from a PC to a phone. Click the Select source Folder button. Locate the directory containing the information you want to use. Click Next to begin copying data from your PC to your phone.

[ 12 ]

Nokia Content Copier Once the source phones information has been loaded from your PCs hard drive, you are asked to determine the types of information you want copied into your phone. The compatible data types are displayed along with the ability to select the types of data you wish to transfer.
Use the check boxes next to the data types to select or deselect the information you want to copy to your phone, then click Next.

Nokia Connection Manager

You may need to use Nokia Connection Manager to select the type of connection you want Content Copier to use during various stages of the process. For example, if you select Copy data from one phone to another, and the source phone requires a serial cable, click Content Copiers Connection button to launch Connection Manager. Then select the correct cable option for the source phone. To switch connection type while using Content Copier: Establish the appropriate connection between your phone and PC (via IR, DLR-3P, or DAU9-9P), then click the Connection button. Click the desired connection type, then click Select.

[ 13 ]

Allow Nokia Connection Manager to detect your phone. Click OK to return to Nokia Content Copier.
If your phone is not detected right away, switch to one of the other connection types, then back to the desired connection type. This forces Connection Manager to redetect your phone. Note: If you are copying data from one phone to another and the source phone uses an infrared connection, interrupt the infrared connection between source phone and PC. Allow the Windows warning message regarding interrupted infrared communications to completely time-out before aligning the target phone with your PCs infrared port. By doing so, you allow Connection Manager to detect your phone more quickly.

Nokia Content Copier log

When you have successfully completed one of the Nokia Content Copier tasks, the Finish screen is displayed along with a log of the tasks that were just performed. At the Finish screen, you have the following options: Click Save to save the log (.LOG) file to your PCs hard drive. Click New Action to return to the beginning of the Nokia Content Copier wizard. Click Finish to exit Nokia Content Copier.

PC Composers interface interprets the multiple track information and allows you to choose the correct track or instrument.

Before you begin

If the MIDI sequence you want to use contains too many notes, the following error message is displayed when trying to open the file:
Nokia PC Composer processes MIDI notes in octave 5 and 6 of the MIDI keyboard. If your MIDI sequence contains notes outside this range, the following error message is displayed when opening the file:

[ 22 ]

Nokia PC Composer OPEN A STANDARD MIDI FILE To open a MIDI file: 3 Click the Open button (or select Open from the File menu). Locate the MIDI file you want to use as a ringing tone, then click Open. Use the Track list boxs drop-down arrow and locate the desired track.

Track list box

Click the Convert track to tone button to convert MIDI information to ringing tone format.

Edit and save

You may need to edit the converted MIDI information (adjust note lengths, remove extra rests, etc.) so that the tune plays correctly. For more information on editing a ringing tone, please refer to Edit a ringing tone on page 19. When you have completed editing the ringing tone, you can save your work in ringing tone (.ott) format, then send the new tone to your phone. For more information on saving, please refer to Save your new ringing tone on page 21. For more information on sending a ringing tone to your phone, please refer to Transfer via infrared or cable on page 21. [ 23 ]
WORK WITH RTTTL RINGING TONE FILES
Ringing Tones Text Transfer Language (RTTTL) files are text files that contain various types of information that make up a ringing tone. When your phone receives a ringing tone over the air, your phone is actually receiving the information in RTTTL format. The RTTTL file includes song title, scale and tempo indications, and the actual note information. An RTTTL formatted ringing tone may appear as follows: babbino:d=4,o=5,b=140:g#,g#,g#,2c6,g,2f,8p,2d#,g#

song title

scale and tempo data

note data

Use RTTTL data from the Internet
The Internet has become a popular source for sharing ringing tones in RTTTL format. If you find a ringing tone Web site displaying the RTTTL data, you can create your own RTTTL files by pasting the data into Notepad, then save it using the.txt file extension. PC Composer can open (and save) ringing tones in RTTTL format. Songs you compose in PC Composer can be saved as RTTTL files, then shared with family and friends via e-mail (for example).

Open an RTTTL file

Click the Open button (or select Open from the File menu). Click the File of type drop down arrow, then select RTTTL files (*.txt) from the list of available file types. Locate the RTTTL file on your hard drive or other removable disk drive, then double-click the file name to open. Click the Convert track to tone button.

Click the Contacts tab. Select the details you want synchronized with your phone.
CONTACT DELETIONS By default, contacts deleted from your phone are not deleted from your PIM when you synchronize. If you accidentally delete a contact from your phone, you can restore it by synchronizing again. Deselecting the Ignore contact deletions option instructs PC Sync to permanently delete the corresponding contact in your PIM. Choose this option only when you are certain you want PC Sync to delete the PIM contact (and all details) associated with the deleted phone book entry. Warning: This action cannot be undone!

Set PIM properties

The last properties tab is labeled with the name of your PIM application. Use this properties tab to modify how PC Sync communicates with your PIMs resources. For example, if the number of contacts in your PIM application exceeds the phones memory, you should consider creating a [ 27 ]
subset of your main contact database folder. Use this folder to store those names, numbers, and text information you want to appear in your phone book. Then, use the PIM properties tab to select the location of the new folder containing the set of contacts you have defined for use with your phone.
Synchronizing for the first time
Once you have customized PC Sync for your uses, you are ready to synchronize your phone and PIM. Click the Summary tab Click the Synchronize Now button. Observe the synchronization status indicator. Click the OK button when synchronization is complete. Important: Please refer to the PC Suite Troubleshooting document in the event synchronization is not successful or if PC Suite notifies you of errors. A link to this document can be found in the Nokia PC Suite 4 Program Group.

[ 28 ]

UNDERSTAND THE BASICS OF SYNCHRONIZATION
Nokia PC Sync remains running in the background after you synchronize for the first time. PC Sync places an icon in the Task Bar tray, indicating that the application is running. The colors of the icon change, depending on the status of the infrared connection between your phone and PC. Please refer to the example below:
Blue and green indicates infrared connection between phone and PC. Yellow and gray indicates no infrared connection between phone and PC.

Click OK to confirm your selection.
COPY CONTACTS TO CUSTOM PHONE LIST 1 Click the Contacts button on your Outlook bar 2
Select the contacts you want to appear in your custom list (Hold the CTRL key, then click to select multiple contacts that are not adjacent to each other). Click Edit, then click Copy (or press CTRL + C). Select your custom folder from the Folder List (example: Phone list), or press CTRL + Y to display Go to Folder dialog box. Click Edit, then click Paste (or press CTRL + V) to paste copies of the selected contacts into the new folder. Important: If you decide to drag-and-drop contacts between your main Contacts folder and the new custom folder, make sure to hold the CTRL key while dragging, then release the mouse button first. Failure to use the CTRL key during drag-and-drop moves all selected contacts to the new folder.
UPDATE PC SYNCS OUTLOOK SETTINGS To update PC Syncs settings to synchronize with your custom list: Establish an infrared connection between your phone and PC. Launch Nokia PC Sync from your PCs Start menu. If you have PC Sync enabled on startup, right-click the PC Sync tray icon, then click Configuration. Click the Microsoft Outlook tab. Click the Contacts browse button , then select your custom folder. Click OK to confirm your selection.

[ 32 ]

Nokia PC Sync 5 Click the Summary tab, then click Synchronize Now to synchronize your phone and custom phone list.

Other PIM applications

Other PIM applications (such as Lotus Organizer) require that you create a completely new database file for your custom contacts list. Once you create a new database file, copy the desired contact information from your main contacts file to the new contacts file. PC Sync allows you to synchronize your phone with the contacts file of your choosing. CREATE A NEW DATABASE FILE (FOR EXAMPLE: LOTUS ORGANIZER) 1 With Lotus Organizer running, click File, then click New. Click File, then click Save As. Enter a name for your custom phone list (for example: Phone list).

Wireless modem setup Additional software on your PC (or modification of your PCs current network settings) may also be required. For more information on VPN services, please contact your network administrator. Important: Likewise, some ISPs may not permit access to certain services from Internet connections outside of your ISPs domain (for example: checking or sending e-mail, newsgroup access). Therefore you may not be able to use 2G or 3G packet data in conjunction with some of your home ISPs services. Please contact your ISP for more information on accessing services from outside their domain.
Determine type of data services to use
Your phone is capable of functioning as a wireless modem for both types of data services. There are times when it may be advantageous or appropriate to use one type of data service over another. 3G PACKET DATA You may consider using 3G packet data when: you have large amounts of data to transfer and time/speed is a factor you are traveling and want to surf the Web or check e-mail wirelessly. Because your service provider is your Internet access point, you dont have to search for your regular ISPs local dial-up number.
QNC OR 2G PACKET DATA You may consider using QNC data or 2G packet data when you are traveling and want to surf the Web or check e-mail wirelessly. Because your service provider is your Internet access point, you dont have to search for your regular ISPs local dial-up number. CIRCUIT SWITCHED DATA You may need to use CSD data when: sending a fax to a machine connected to a traditional phone line you do not have VPN access to your corporate LAN, Intranet, or e-mail system your ISP does not allow use of services from outside your ISPs domain [ 45 ]
UNDERSTAND MODEM SOFTWARE
During the modem installation process, Windows looks for software specific to the new device being installed. The modem software (driver) for your phone must be downloaded from the Nokia 6385 or 6370 phones product section of: http://www.nokia.com Since the Add New Hardware Wizard for all Windows operating systems searches the A:\ drive for software or device drivers first, Nokia recommends that you download this file and save it to a floppy diskette. Note: If you choose to save the file to your hard drive, please make note of the path to the file as this information is required to complete the installation successfully. Depending on your operating system, locating this file on your hard drive may add additional steps to the installation process. The Nokia Web site contains the modem software for your phone: nmp6385.inf
Choose the correct type of digital data
When installing this software, you are prompted for the type of digital data services you want to use, as well as the method of connection to your PC (IR or cable): Nokia 6385 2G Packet Data Modem - used for 2G packet data (see your service provider for more information and availability of 2G packet data) Nokia 6385 3G Packet Data Modem - used for 1X packet data (see your service provider for more information and availability of 3G packet data) Nokia 6385 Data Fax Modem - used for CSD and QNC digital data and fax calls (see your service provider for more information and availability of CSD and QNC data services)

CREATE ADDITIONAL MODEM INSTALLATIONS
If you plan on using more than one type of digital data, you must perform additional modem installations so Windows can make the appropriate type of data connection. For example, if you want to use 1X packet data for Web browsing and email, you should select Nokia 6385 3G Packet Data Modem the first time you perform the modem installation. If you also want the ability to send faxes, you need to create an additional modem installation and select Nokia 6385 Data Fax Modem for circuit-switched data services. ADD A MODEM MANUALLY 1 Insert the floppy diskette that has the modem driver (nmp6385.inf) into your disk drive. 6 Double-click the Modems (or Phone and Modems Options) icon in the Windows Control Panel. Click Add (2000/XP users, click the Modems tab, then click Add). If prompted for the type of modem, click Other then click Next. Select the Dont detect my modem option, then click Next. Click Have disk, then click OK to install the software from your disk. Select the modem option that corresponds with the type of digital data you want to use (for example: Nokia 6385 Data Fax Modem), then click Next (please see illustration on the following page). [ 51 ]
Accept any messages (as needed) regarding the software not being appropriate for your phone or digital signatures, then click Next. Select the COM port where your phone is connected, then click Next.

For DLR-3P

For DKU-6 For infrared
Click Finish to complete the installation.
LEARN ABOUT IR AND WINDOWS 2000
Microsoft redesigned its implementation of infrared services with the release of Windows 2000 Professional. To make an IR serial connection between IR-equipped Nokia phones and IR-equipped PCs running Windows 2000, you must download and install the following Microsoft software update: Security Update, August 19, 2001

[ 52 ]

Learn about Windows 2000 SRP1
Microsoft recently released the Windows 2000 Security Rollup Package 1 that provides a cumulative package of security updates offered since the release of Windows 2000 Service Pack 2 (SP2). The Security Update, August 19, 2001 software appears to be incorporated into SRP1. However, Nokia has determined that the Security Update, August 19, 2001 software is still required in addition to SRP1.
Locate Security Update, August 19, 2001
To locate the necessary software: Point your Web browser to: http://www.microsoft.com/windows2000/downloads/ Using the sites search utility, locate the Microsoft Security Bulletin: MS01-046. Click the link to access Security Update, August 19, 2001, located in the list of search results. Follow the instructions for downloading the software to your PCs hard drive.

1 Double-click the My Computer icon, then double-click the Dial-up Networking folder (Windows 2000 and Windows ME users: Click Start, point to Settings, then click Dial-up Networking). Double-click the Make New Connection icon. Type a name for your new connection (for example: Internet-Nokia phone). Click the drop-down arrow and select your Nokia phone as the modem to use, then click Next.
Enter the area code, telephone number, and country code (if necessary), then click Next. Click Finish to save the new configuration in your Dial-up Networking folder. Make sure to configure any necessary network parameters for this connection prior to dialing (IP address of DNS or WINS, etc.). Note: For more information on configuring your network connection, please consult your Internet service provider or your companys help desk. [ 60 ]

Connect to the network

Make sure you establish a connection between your phone and PC (using the serial cable or IR) before making a digital data call. 3 Double-click the new connection (for example: Internet-Nokia). Enter your user name and password, then click Connect. Your phone displays Connecting. while establishing a connection. Once a successful connection has been made, Data call appears on the phones screen. Note: Your Windows operating system displays its normal series of messages while the connection is being established and verified. Note: Your wireless service provider must support digital data for this feature to work. Contact your service provider to verify that this service is available in your area.
GET CONNECTED TO AMERICA ONLINE (AOL)
Your America Online software can be configured to use your Nokia phone as a wireless modem. MODEM SETUP To add your Nokia phone as a new modem to AOLs connection setup: From the Sign On screen, click SETUP. Click Expert Setup, then click the Devices tab. Click the Expert Add button. Verify that Modem (telephone line connection) is selected as the type of connection device you want to add, then click Next. Select the generic modem option (for example: Standard (Hayes Compatible)) from the list of modems. Select the COM port assigned to your PCs infrared COM port, or the hardware COM port where the DLR-3P is connected.

[ 64 ]

CONFIGURE YOUR FAX SOFTWARE
Before you can use your phone to send and receive fax calls, you must configure your fax software so that it uses your phone as the active modem (rather than your existing modem). Many of the most popular fax programs should support multiple modems connected to a PC or laptop computer, including Symantec WinFax Pro, Smith Micro Software HotFax (version 3.02 or newer), Castelle FaxPress, etc. Note: Data or fax calls using your Nokia phone are possible only if your service provider supports digital data and fax service. You may be required to subscribe to these services. Check with your service provider before attempting to send or receive faxes.

Select the correct modem

Each fax application typically has a setup menu that can be used to alter the settings for your modem, as well as define how and when calls are to be received (for example: immediately, on the third ring, etc.). This menu may also provide you with a list of available modems that you can use when sending and receiving fax calls.

[ 65 ]

Use your fax programs settings menu to select your Nokia phone as the active fax modem.

Hardware setup

Use the modem properties dialog box of your fax software to confirm the following settings: Communications port - COMn (where n= the COM port number assigned to your phone) Initialization - 19200 bps Modem type - Class 2.0 Flow control - Hardware Note: You may need to add the following initialization string to your fax software, even though the program provides a drop-down list or checkbox for setting the fax mode/class:

AT+FCLASS=2.0

LEARN ABOUT MANUAL SELECTION OF INCOMING CALLS
You can receive digital data or fax calls with your PC using your Nokia phone the same way that you would using your existing modem. However, certain service providers require that you preset your phone to receive incoming data or fax calls, rather than having the phone automatically detect the type of incoming call. Note: Your service provider may have special requirements for inbound data and fax calls. Check with your service provider to see if pre-arrangement of incoming data and/or fax calls is necessary.

[ 66 ]

DAN-1 This adapter is used to join your devices serial cable to the DLR-3P cable (as shown in the figure on the following page).

[ 70 ]

DAN-1 null modem adapter

DLR-3P cable

Palm devices cable
Note: Macintosh PalmOS device users do not need to use the RS232 - DB9 adapter. Important: If you are unable to order the RS-232C serial cable as an accessory, you may be able to purchase a USB-to-RS-232C adapter. This device may be available at your local computer retailer, or via the Internet. Or you may consider using IR as your connection method.

IR (infrared) connection

Your PalmOS device should be equipped with an infrared port. You may find it more convenient to connect your phone and PalmOS device using IR, especially if you prefer to leave your serial cable or docking cradle attached to your PC. Before dialing, make sure you enable infrared communications on your PalmOS device, then align the IR ports of the two devices. The preferable distance between the two devices in an infrared connection is a range of three inches to three feet maximum. There must be no obstructions between the two devices and the IR ports of the two devices have to be pointing at each other. Your Nokia phone is a Class 1 Laser Product.

[ 71 ]

EDIT CONNECTIONS PREFERENCES
Before you can make data calls using your PalmOS device and your Nokia phone as a wireless modem, you need to create a new connection device in the Connections preferences folder. 3 Tap the Applications icon, then tap Prefs Tap the Categories drop-down menu, then tap Connection. Tap New. Enter the name of the new connection device (for example: Nokia). Click the Connection Method drop-down arrow, then click IrCOMM to Modem (IR) or Serial to Modem (DLR-3P). Click Details. Set speed to 57,600 bps and flow control to Automatic. Click OK when finished, then click OK to close the Edit window.
Your new Nokia phone configuration should now appear in the list of Connection options, and is available to all applications that support a modem connection.

[ 72 ]

MAKE A DIAL-UP CONNECTION
Once you have a modem configuration for your Nokia phone, you can use that configuration with any existing TCP/IP or network preferences, as well as any stand-alone 3rd party E-mail, Web browser, or fax programs.

gvx4400 lcd , lgvx6000 lcd; lgvx10 lcd, lg 4010 lcd ,lgvx3100 lcd, lg 510 lcd ,lg 5250 lcd,lg 5350 lcd , lg 5450 lcd
This Free EBook is brought to you by NaturalAging.com.
100% Effective Natural Hormone Treatment
Menopause, Andropause And Other Hormone Imbalances Impair Healthy Healing In People Over The Age Of 30!
lgvx4400 lcd , lgvx6000 lcd; lgvx10 lcd, lg 4010 lcd ,lgvx3100 lcd, lg 510 lcd ,lg 5250 lcd,lg 5350 lcd , lg 5450 lcd By connie lgvx4400 lcd , lgvx6000 lcd; lgvx10 lcd, lg 4010 lcd ,lgvx3100 lcd, lg 510 lcd ,lg 5250 lcd,lg 5350 lcd , lg 5450 lcd by connie lgvx4400 lcd , lgvx6000 lcd; lgvx10 lcd, lg 4010 lcd ,lgvx3100 lcd, lg 510 lcd ,lg 5250 lcd,lg 5350 lcd , lg 5450 lcd , lgvx1 lcd , lgvx2000 lcd , lg 4050 lcd , lgvx1200 lcd,lg 1010 lcd , sanyo 8100 lcd ,sanyoscp4500 lcd.sanyo 6000 lcd, sanyo 6400 lcd , sanyo 4900 lcd, sanyo 5400 lcd ,sanyo 4700 lcd , sanyo 5150 lcd, sanyo 5300 lcd,sanyo 5500 lcd ,sany6200lcd, sanyo RL2000 lcd,sanyo RL2500 lcd, sanyo vm4500 nextel i830 lcd , nextel i730 lcd , nextel i95 lcd,nextel i90 lcd, nextel i530 lcd, nextel i205 lcd ,nextel i60 lcd ,nextel i60clcd ,nextel i30 lcd , nextel i1000 lcd , nextel i700 lcd , nextel i90c lcd , nextel i305 lcd , nextel i35 lcd , motorola t720 lcd , motorola v60 lcd , motorola v60i lcd , motorola v120c lcd , motorola p8160 lcd ,motorola v2260 lcd , motorola v2267 lcd , motorola v70 lcd, motorola v2290 lcd , motorola v3682 lcd ,motorola c330 lcd ,motorola c332 lcd ,motorola c350 lcd , motorola t721 lcd ,motorola t722 lcd ,motorola t730 lcd , motorola v600 lcd , motorola v400 lcd , motorola v300 lcd , motorola 66 lcd , motorola v730 lcd,motorola v720 lcd samsung a310 lcd , samsung a400 lcd , samsung a620 lcd , samsung a460 lcd , samsung a500 lcd , samsung a530 lcd , samsung a600 lcd , samsung e105 lcd , samsung e715 lcd , samsung n105 lcd ,samsung n300 lcd , samsung n200 lcd , samsung s105 lcd, , samsung n400 lcd , samsung n620 lcd , samsung n625 lcd , samsung t300 lcd , samsung v205 lcd,samsung v600 lcd, samsung x427 lcd , samsung a610 lcd , samsung i500 lcd ,samsung i700 lcd,samsung v1660 lcd ,samsung s307 lcd , nokia 1100 lcd , nokia 1221 lcd , nokia 2260 lcd , nokia 2270 lcd,nokia 3310 lcd ,nokia 3390 lcd ,nokia 2270 lcd , nokia 3586 lcd , nokia 2285 lcd , nokia 8210 lcd, nokia 3100 lcd , nokia 6370 lcd , nokia 3200 lcd , nokia 3285 lcd , nokia 3300 lcd , nokia 8250 lcd , nokia 6385 lcd, nokia 3360 lcd , nokia 3361 lcd, nokia 3530 lcd, nokia 3560 lcd, nokia 3570 lcd , nokia 8265 lcd , nokia 6560 lcd , nokia 8270 lcd , nokia 6585 lcd , nokia 3585 lcd , nokia 3589 lcd , nokia 3590 lcd , nokia 3595 lcd, nokia 8390 lcd,
nokia 8310 lcd, nokia 7250 lcd , nokia 7210 lcd , nokia 6610 lcd , nokia 6100 lcd, nokia 7600 lcd , nokia3650 lcd , nokia 3660 lcd , nokia 5100 lcd , nokia 5110 lcd , nokia2300 lcd , nokia8810 lcd , nokia 6800 lcd , nokia 5120 lcd , nokia 5125 lcd, nokia 5170 lcd , nokia 3590 lcd , nokia6110 lcd , nokia 8890 lcd , nokia 6820 lcd , nokia 7160 lcd , nokia6200 lcd , nokia3590 lcd , nokia 6110 lcd , nokia 8890 lcd nokia 6820 lcd , nokia7160 lcd , nokia6200 lcd , nokia3510 lcd , nokia 6225 lcd , nokia6310 lcd , nokia 6340 lcd , nokia6360 lcd , nokia6600 lcd , nokia6200 lcd , nokia6510 lcd , nokia 7200 lcd , nokia 5100 lcd , nokia5210 lcd , nokia 5510 lcd sony ericsson t68i lcd. sony ericsson t610 lcd. sony ericsson t68 lcd. sony ericsson t28 lcd. sony ericsson t39 lcd. sony ericsson t66 lcd. sony ericsson t800 lcd. sony ericsson t310 lcd. sony ericsson t2600 lcd. sony ericsson t200 lcd. sony ericsson t310 lcd. sony ericsson t630 lcd. sony ericsson t100 lcd. sony ericsson t2500 lcd. sony ericsson t2700 lcd. sony ericsson t200 lcd. sony ericsson t600 lcd. Seimens a50 lcd, Seimens a55 lcd, Seimens m45 lcd, Seimens c45 lcd, Seimens c56 lcd, Seimens a56 lcd, Seimens c55 lcd, Seimens mc60 lcd, Seimens s46 lcd, Seimens mt50 lcd, Seimens cx65 lcd, Seimens s55 lcd, Seimens c60 lcd, Seimens a60 lcd,
Panasonic gd 55 lcd, Panasonic gd 87 lcd, Panasonic gd 93 lcd, Panasonic gd 90 lcd, Panasonic gd 92 lcd, Panasonic gd 52 lcd, Panasonic gd 35 lcd, Panasonic gd 56 lcd, Panasonic gd 50 lcd, Alcatel ot311 lcd. Alcatel ot3511 lcd. Alcatel ot715 lcd. Alcatel ot 835 lcd. Alcatel ot 735 lcd. Alcatel ot756 lcd. Alcatel ot 332 lcd. Alcatel ot535 lcd. Alcatel ot332 lcd. None
lgvx 10 lcd and housing By connie lgvx 10 lcd and housing by connie Nextel i90 lcd , Nextel i95 lcd ,LG vx510 lcd , LGVX 4400 lcd ,LGVX6000 lcd is on sale this week. SLC development co., ltd locates in Dongguan city Guangdong province China, mainly exporting mobile phone spare part eg: original lcd, flex cable., socket and original mobile phone housing. We mainly run Nextel, Nokia, LG, Sanyo, Samsung spare parts. Our products come from Shanghai, Tianjin, Zhejiang, Jiangsu, Hainan in China, Thailand and Singapore. We have 9 excellent technical persons and good afterservice.we hope our information bring you a good chance m