Nokia Bluetooth Headset BH-607

Issue 2. 1

ENGLISH
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-607 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. the products described in this document without prior notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc. To the maximum extent permitted by applicable law, under no circumstances shall Nokia or any of its licensors be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with your Nokia dealer for details. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
2009-2010 Nokia. All rights reserved. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of

Introduction

With the Nokia Bluetooth Headset BH-607, you can make and answer calls hands-free with your compatible mobile device. The headset is provided with wind noise reduction and noise cancellation that helps you handle calls in noisy environments. Read this user guide carefully before using the headset. Also, read the user guide for the device that you connect to the headset. This product may contain small parts. Keep them out of the reach of small children.
Note: The surface of this device does not contain nickel in the platings. The surface of this device contains stainless steel.

My own key

The headset has a shortcut key that you can set to perform different functions on a compatible Nokia device using the Nokia Accessory Setup Application. With the application, you can also view headset information and define headset settings when the headset is connected to your device. For details, read the built-in help of the application. If the application is not already installed in your mobile device, check the availability of the application for your device from the support pages of this headset at www.nokia.com/ support or your local Nokia website. If the application is not available for your Nokia device, you can use the

shortcut key to mute the microphone during a call. interference from obstructions, such as walls, or other electronic devices. The headset is compliant with the Bluetooth Specification 2.1 + EDR supporting the Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.
Bluetooth wireless technology
Bluetooth wireless technology allows you to connect compatible devices without cables. The headset and the other device do not need to be in line of sight, but they should be within 10 metres (33 feet) of each other. Connections may be subject to

Get started

The headset contains the following parts shown on the title page: power key (1), volume key (2), My own key (3), answer/end key (4), microphones (5), indicator light (6), charger connector (7), earloop (8), and earpiece (9). Before using the headset, you must charge the battery and pair the headset with a compatible device.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.

Charge the battery

Before charging the battery, carefully read Battery and charger information.
Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Use of unapproved chargers may present a risk of fire, explosion, or other hazard. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.
1. Connect the charger to a wall outlet. 2. Connect the charger cable to the charger connector. The red indicator light is displayed during charging. Charging the battery fully may take up to 1 hour. Charging the battery with the AC-15 charger for 15 minutes provides up to 5 hours of talk time. 3. When the battery is fully charged, the green indicator light is
displayed. Disconnect the charger from the headset, then from the wall outlet. The fully charged battery has power for up to 7 hours of talk time or up to 160 hours of standby time. To check the battery charge when the headset is not connected to a charger, press the power key when the headset is connected to a mobile device. If the indicator light is green, the charge level is sufficient. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery. When the battery charge is low, the headset beeps every 5 minutes and the red indicator light flashes.

Switch on or off

To switch on, press and hold the power key for about 2 seconds. The headset beeps, and the green indicator light
flashes slowly while the headset tries 1. Ensure that your mobile device is switched on and the headset is off. to connect to one or two last connected devices. When the headset 2. If the headset has not been is connected to at least one device and previously paired with a device, is ready for use, the blue indicator switch on the headset. The headset light flashes slowly. If the headset has enters pairing mode, and the blue not been paired with a device, it indicator light starts to flash automatically enters pairing mode. quickly. To switch off, press and hold the If the headset has been previously power key for about 2 seconds. The paired with a device, ensure that headset beeps, and the red indicator the headset is switched off, and light is briefly displayed. If the headset press and hold the power key for is not connected to a device within about 5 seconds until the blue about 30 minutes, it switches off indicator light starts to flash automatically. quickly. 3. Within about 3 minutes, activate Pair and connect the headset the Bluetooth feature on your Before using the headset, you must device, and set it to search for pair and connect it to a compatible Bluetooth devices. For details, see device. the user guide of your mobile You can pair the headset with up to device. eight devices, but you can connect it 4. Select the headset from the list of to only up to two devices at a time. found devices.
5. If necessary, enter the passcode 0000 to pair and connect the headset to your device. In some devices, you may need to make the connection separately after pairing. When the headset is connected to at least one device and is ready for use, the blue indicator light flashes slowly. To manually connect the headset to one or two last used devices, press and hold the answer/end key for about 2 seconds (when no devices are connected), or make the connection in the Bluetooth menu of the desired device. If you have a device connected to the headset and want to connect a second device, make the connection in the Bluetooth menu of the device. You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu.

Basic use

Change the earpad
The headset may be provided with different sized earpads. Select the earpad that fits the best and is the most comfortable for your ear. To change the earpad, pull the current earpad from the earpiece, and push the new earpad into place (13).
Place the headset on the ear
Gently push the earpiece against your ear.
You can rotate the earpad to keep the headset securely in the ear (14). For example, if you use the headset on the right ear, you may need to rotate the earpad to the right for the best fit. If you wear an earring, ensure that it is not accidentally attached to the earpad. To use the headset with the earloop, attach the earloop to it (12). To detach the earloop, gently pull it from the headset. Slide the earloop behind your ear (10), and point the headset towards your mouth (11). Push or pull the earloop to set its length. The selected volume level is saved for the device that you currently use with the headset.
To make a call, use your mobile device in the normal way when the headset is connected to it. To redial the number you last called (if your mobile device supports this feature with the headset), when no call is in progress, press the answer/ end key twice. To activate voice dialling (if your mobile device supports this feature with the headset), when no call is in Adjust volume progress, press and hold the answer/ The headset automatically adjusts the end key for about 2 seconds. Proceed volume according to ambient noise. To as described in the user guide of the manually adjust the volume, slide the mobile device. volume key up or down. To adjust the To answer or end a call, press the volume quickly, slide and hold the key. answer/end key. To reject a call, press this key twice.
To mute or unmute the microphone during a call, press the volume key. The headset beeps, and a related icon is displayed on your device (if supported by the device). To switch a call between the headset and a compatible connected device, press and hold the answer/end key for about 2 seconds. To answer a waiting call and put the active call on hold, press and hold the answer/end key for about 2 seconds. To end the active call and make the call on hold active, press the answer/ end key. To switch between the active call and the call on hold, press and hold the answer/end key for about 2 seconds.

Manage two calls

To manage two calls at the same time, your mobile device must support the Bluetooth Hands-Free Profile 1.5, and call waiting must be activated in the device. Call waiting is a network service and is available when the headset is connected to only one device. To answer a waiting call and end the active call, press the answer/end key.

Turn lights on or off

By default, the indicator lights are shown in all situations. To turn the lights off in some situations (for example, during a call or when the headset is connected to a mobile device), press and hold the answer/ end key, and slide and hold the volume key down for about 5 seconds when the headset is connected to a device. The yellow indicator light flashes once.
To turn the lights back on, press and hold the answer/end key, and slide and hold the volume key up for about 5 seconds. The green indicator light flashes once. If the headset can connect to two devices at the same time and you use redialling or voice dialling, the call is made on the device that you last used to make a call when the headset was connected to it.
Allow connection to two devices
You can have the headset connected to two devices at the same time. By default, the headset can only be connected to one device at a time. To allow the headset to connect to two devices, switch off the headset, and press and hold the power key, and slide and hold the volume key up for about 5 seconds. The green indicator light flashes once. To allow the headset to connect to only one device, switch off the headset, and press and hold the power key, and slide and hold the volume key down for about 5 seconds. The yellow indicator light flashes once.

Clear settings or reset

To clear all the settings from the headset (including settings you have defined with the Nokia Accessory Setup Application), switch off the headset, and press and hold the power key and the answer/end key at the same time for about 8 seconds. The headset beeps twice, and the red and green indicator lights alternate. After the settings are cleared, the headset enters pairing mode. To reset the headset if it stops functioning, even though it is charged, connect the headset to a charger while you press and hold the power key.

ENGLISH Troubleshooting

If you cannot connect the headset to your compatible device, check that the headset is charged, switched on, and paired with the device.
Battery and charger information
This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. This device is intended for use when supplied with power from the following chargers: AC-3, AC-4, AC-15, and DC-4. The exact charger model number may vary depending on the type of plug. The plug variant is identified by one of the following: E, EB, X, AR, U, A,C, K, or UB. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator light is displayed. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Always try to keep the battery between 15C and 25C (59F and 77F). Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work
temporarily. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Never use any charger that is damaged. Operating times are estimates only. Actual performance depends on many factors such as device settings selected, device features being used (or running in the background), battery condition and ambient temperature.

Taking care of your device
Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. Do not store the device in high or cold temperature. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. When the device warms to its normal temperature from a cold temperature, moisture can form inside the device and damage electronic circuit boards. Do not attempt to open the device.
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Only use a soft, clean, dry cloth to clean the surface of the device. Do not paint the device. Paint can clog the moving parts and prevent proper operation. These suggestions apply equally to your device, charger, or any accessory. Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. Check product environmental information and how to recycle your Nokia products at www.nokia.com/werecycle, or nokia.mobi/werecycle. The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies in the European Union. Do not dispose of these products as unsorted municipal waste. For more environmental information, see the product EcoDeclarations at www.nokia.com/ environment.

Nokia Bluetooth Headset BH-607 with My own key DataSheet

Product Overview

Nokia Bluetooth Headset BH-607 empowers people in their busy lives, making a contribution to the daily success. It is designed for every day use with natural comfort and ease of use in mind. The headset presents My own key a configurable key to maximize the multi-tasking capacities. My own key can be pre-programmed with up to three predefined functions which can be accessed and performed easily whilst doing other tasks like e-mailing or navigating. Multitasking is further enhanced by the advanced multipoint connection enabling simultaneous access to 2 devices, including concurrent call handling. Nokia Bluetooth Headset BH-607 provides outstanding audio with advanced digital signal processing (DSP), dual microphones and new wind noise reduction technology for interference-free conversation in any environment.

Key Features

My own key: personalize to perform up to 3 of your favorite functions Listen unread sms Call to predefined number Reject call and send predefined sms Speak current time Mute Noise-free communication Advanced noise cancellation with 2 built-in microphones for capturing speech Acoustical wind noise reduction Advanced digital signal processing for clear audio quality Call management features: answer/end, redial, voice dial Advanced multipoint Handle two devices simultaneously: Stay connected to two devices at the same time, e.g. phone and VOIP Handle simultaneously two calls from different devices, by putting one on hold when answering another Comfortable wearing Curved form Two sets of different types and sized changeable ear plugs (6 pcs) Adjustable ear loop
2009 Nokia. All rights reserved. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation. Bluetooth is a registered Trademark of Bluetooth SIG, Inc. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Specifications are subject to change without notice. The availability of particular products and services may vary by region. Check with the Nokia dealer nearest to you.

Sales Package Content

Nokia Bluetooth Headset BH-607 AC-5 travel charger 2 different sets of changeable ear rubbers (3 sizes of each set) Optional ear hook User Guide

Compatibility

Compatible with phones and devices compatible with Bluetooth Specification 2.1+EDR and lower, and supporting hands free profile 1.5, headset profile 1.1. My own key personalization is possible with Nokia Symbian devices (S60 3.2 or newer to full extent, partially with S60 3.1 release)

Technical Profile

Bluetooth compliance Weight Length Width Thickness Battery Talk Time
Stand by Time Charging time Color Operating temperature Supported chargers
Bluetooth Specification 2.1+EDR, hands free profile 1.5, headset profile 1.g main body with M-size ear rubber 62 mm 18 mm 10.5 mm main body Li-Ion polymer 3.7V/125mA Up to 7 hours (fully charged) Up to 5 hours (with 15 minutes of charging only) Up to 160 hours Less than one hour with AC-5E charger Warm silver with tonal metallic details -15C to +55C (5F to 131F) Compact Charger AC-5 (included in the packaging), and Nokia Chargers AC-3, AC-4 and DC-4 (sold separately)