Reviews & Opinions
Independent and trusted. Read before buy Panasonic SA-PM19!

Panasonic SA-PM19

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Panasonic SA-PM19, size: 2.4 MB
Related manuals
Panasonic SA-PM193

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Panasonic SA-PM19About Panasonic SA-PM19
Here you can find all about Panasonic SA-PM19 like price and other informations. For example: remote, manual.

Panasonic SA-PM19 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Panasonic SA-PM19 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Panasonic SA-PM19 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

R6, AA, UM-3

A The remote control
I Batteries Insert so the poles (+ and ) match those in the remote control. Do not use rechargeable type batteries. Do not: mix old and new batteries. use different types at the same time. heat or expose to flame. take apart or short circuit. attempt to recharge alkaline or manganese batteries. use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. I Use Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. Refer to page 7 for the remote control sensor position.

B Placement of speakers

Speakers are designed identically so that no left or right channel orientation is necessary. Notes Keep your speakers at least 10 mm (13/32) away from the system for proper ventilation. These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.

C Connections

Plug the AC power supply cord into a household AC outlet only after all other connections have been made. To prepare the AM loop antenna wire and speaker cords, twist the vinyl cover tip and pull off.

To household AC outlet

Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio signals are received with the least amount of interference.

FM AN T AM AN 75 T

Adhesive tape

FM indoor antenna

Note For the best reception: An FM outdoor antenna is recommended. (\ page 6)

LOOP EXT

(Continued on next page)

RQT7364-P_05-08_EN

30/12/03, 10:33 am

EXT AM loop antenna

T FM AN AM AN T

Connections

Connect the AM loop antenna.
Stand the antenna up on its base. Keep loose antenna cord away from other wires and cords.
Connect the speaker cords.
Confirm the colors of the tags on the ends of the cords. For White tags: Connect cords to gray terminals. For Blue, Black and Red tags: Connect cords so tag colors match the terminal colors. Cords with white and blue tags are for high frequency. Cords with red and black tags are for low frequency. Incorrect connection can damage the unit. Caution Use only the supplied speakers. The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. Caution Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/ or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. Do not attach these speakers to walls or ceilings.

Red Black

White Blue
Black () 1 Gray (+) 3 Red (+)

Blue ()

LOW (6 )

HIGH (6

FM AN AM AN T T
Connect the AC power supply cord.
Note The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
FM outdoor antenna (not included)
Optional antenna connections
You may need an outdoor antenna if you use this system in a mountainous region or inside a reinforced-concrete building, etc.

A FM outdoor antenna

LOOP 75
Disconnect the FM indoor antenna if an FM outdoor antenna is installed. Note An outdoor antenna should be installed by a qualified technician only.
AM outdoor antenna (not included)

B AM outdoor antenna

Connect the outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a window or other convenient location. Note When the unit is not in use, disconnect the outdoor antenna to prevent possible damage that may be caused by lightning. Never use an outdoor antenna during a lightning storm.

5-12 m

T AM AN 75
LINE OUT position Analog player (not included)
AM loop antenna (included)
External unit connections
Make sure that the power supply for all components has been turned off before making any connections. For details, refer to the operating instructions of the unit which is to be connected. All peripheral components and cables sold separately.

AUX R L

(L) (R)
C Connecting analog equipment
This example shows how to connect an analog player with a PHONO OUT/LINE OUT switch. When units other than those described are to be connected, please consult your audio dealer. Note Only an analog player with a built-in phono equalizer can be connected. Set the switch to the LINE OUT position at the back of the analog player.

Rear panel of this unit

30/12/03, 10:34 am

Top of the unit

Front panel controls
1 Cassette lid 2 Cassette open button (OPEN 0). Standby/on switch (yI POWER).. 9

Main unit

# $ % & ( ) ~ + ,

PHONES

DEMO CD CHECK

OPEN/ CLOSE

"

Remote Control

3 / : ; < = > ? @ [ \ ]

_ { ( , | + 8 }

Buttons such as function in exactly same way as the buttons on the main unit. Auto off/Sleep timer button (AUTO OFF, SLEEP)... 22, 24 Disc button (DISC).. 13 CD Program, tuner preset button (PROGRAM)... 10, 15 Play mode select button (PLAY MODE). 9, 13 Use this for selecting CD play mode, tune mode and FM mode. Repeat button (REPEAT).. 14 Delete button (DEL).. 18 Album selection button (ALBUM, ).. 16 Intro button (INTRO)... 17 Marker memory/recall button (MARKER).. 19 Shift button (SHIFT) To use functions labelled in orange : While pressing [SHIFT], press the corresponding button. For buttons [AUTO OFF], [CLOCK/TIMER], [PLAY/REC] and [SURROUND]. Surround, Super sound EQ button (SURROUND, S.SOUND EQ).. 25 Play timer/record timer/Dimmer button (PLAY/REC, DIMMER).. 8, 23 Clock/timer/CD display button (CLOCK/TIMER, DISPLAY).. 8, 14 Numbered, character buttons (h10, 1-9, 0, A-Z, SPACE!#).. 10, 18 Stop/clear button (7 CLEAR).. 15 Enter button (ENTER).. 18 Title search mode select button (TITLE SEARCH)... 18 Muting button (MUTING).. 8 Preset EQ/Manual EQ button (SOUND). 25

S.SOUND EQ

ALBUM/ TRACK

TUNER BAND

VOLUME

CD CHANGE

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. AC supply indicator (AC IN) This indicator lights when the unit is connected to the AC outlet. Super sound EQ button (S.SOUND EQ). 25 Aux button (AUX)... 25 Tuner/band select button (TUNER/BAND). 9 CD skip/search, tape fast-forward/rewind/TPS, tune/ preset channel select, time adjust buttons (4/REW/4, 3/FF/). 9, 11, 20, Stop and demonstration button (STOP 7, DEMO)... 8, 11 Checking CD position (CD CHECK). 12 CD trays Remote control sensor Display Album/track selection button ( ALBUM/TRACK ).. 16 Recording start/pause button (/8 REC).. 21 CD play/pause button (CD 3/8).. 11 CD change button (0 CD CHANGE).. 12 CD tray open/close button (0 OPEN/CLOSE).. 11 Volume control (VOLUME DOWN, UP). 9 Tape play button (TAPE 3).. 20 Headphone jack (PHONES).. 25 CD selection (CD 1~CD 5).. 12

STOP , DEMO

A Demo function
When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting DEMO ON.
Press and hold [STOP 7, DEMO].
The display changes each time the button is held down.

DEMO OFF DEMO ON

While in the standby mode, select DEMO OFF to reduce power consumption.

B Setting the time

This is a 12-hour clock.
Press [y] to turn the unit on. y Press [SHIFT] + [CLOCK/TIMER] to display CLOCK.
Every time you press the button:
CLOCK PLAY Original display
Within 5 seconds Press and hold [4/REW/4] or [3/FF/] to set the time. Press [SHIFT] + [CLOCK/TIMER].
Displaying the clock: Press [SHIFT] + [CLOCK/TIMER]. The clock is shown for about 5 seconds. Note The clock may lose or gain some time over a period. Readjust if necessary.

CLOCK/ TIMER

C Convenient functions

4/REW 3/FF

To dim the display panel Press [DIMMER].
The display brightness will be reduced except for [AC IN] indicator. To cancel, press [DIMMER] again.

To mute the volume

DIMMER

Press [MUTING].

To cancel, press [MUTING] again. Muting can also be cancelled by lowering the volume all the way to --dB. When the system is turned off, the muting operation will be automatically cancelled.

The radio: manual tuning

Press [TUNER/BAND] to select:
Press [PLAY MODE] to select MANUAL.

PRESET MANUAL

Press [4/REW/4] or [3/FF/] to select the frequency of the required station.
ST is displayed when a stereo FM broadcast is being received.

Adjust the volume.

TUNER/BAND

PLAY MODE

Auto tuning Press and hold [4/REW/4] or [3/FF/] for a moment. The unit begins auto tuning when the frequency starts changing rapidly and stopping when it finds a station. To cancel, press [4/REW/4] or [3/FF/] again. Excessive interference may interrupt auto tuning.
A To improve FM sound quality
Press and hold [PLAY MODE] to display MONO. To cancel, press and hold [PLAY MODE] again. MONO is also cancelled if the frequency is changed. For normal listening, turn off MONO.

B FM allocation setting

By main unit only This system allows you to receive FM broadcasts allocated in 0.1 MHz steps. To change the step to 0.1 MHz Press and hold [TUNER/BAND]. After a while the display flashes with the current minimum frequency. Continue to hold [TUNER/BAND] down. When the minimum frequency changes, release the button. To cancel, repeat the above steps.

DOWN UP

Notes After changing the setting, previously preset frequency will be cleared. Sound is momentarily interrupted if you load/unload a cassette while listening to an AM broadcast. PLAY MODE

RQT7364-P_09-15_EN

PROGRAM

The radio: preset tuning

There are two methods of pre-setting stations: Automatic presetting: Stations the tuner can receive are preset automatically. Manual presetting: You can select the stations to preset and the order they are preset in. Up to 15 stations can be preset for FM and AM bands. Press [TUNER/BAND] to select FM or AM.

A Automatic presetting

Auto presetting for AM and FM each.
Tune to the frequency where presetting is to begin (\ page 9). Press and hold [PROGRAM]. Auto presetting starts and the last station memorized is tuned in.

B Manual presetting

Preset the stations one at a time.
Press [4/REW/4] or [3/FF/] to tune to the required station. Press [PROGRAM]. Press numeric buttons to select a channel.

ABC DEF

The station occupying a channel is erased if another station is preset in that channel.

C Selecting channels

Press numeric buttons to select the channel.
For channels 10 to 15 press [h10], then the two digits.
1 Press [PLAY MODE] to select PRESET. 2 channel./REW/4] or [3/FF/] to select the Press [3
This unit can play CD-DA (digital audio) format audio CD-R and CD-RW that have been finalized (a process performed after recording that enables this unit to play audio CD-R and CDRW). It may not be able to play some CD-R or CD-RW due to the condition of the recording. The unit contains five CD trays. You can simply listen to the CD on a single tray, or you can select and listen to the CD in a particular tray. See the section on All-Disc play (\ page 13) for information on how to listen to all the CDs one after another.

4/REW/4, 3/FF/

(CD 1) ~ (CD 5)
Listening to CD on a single tray

0 OPEN/ CLOSE

Press [0 OPEN/CLOSE] to insert the CD on the disc tray. Press again to close. Press [CD 3/8] to start play from the first track. The player stops after playing the last track. Adjust the volume.

Action

To stop the disc pause play
Press [STOP 7 ,DEMO]. Press [CD 3/8]. Press again to resume play. skip tracks Press [4/REW/4] or [3/FF/]. search through Press and hold [4/REW/4] or [3/FF/ tracks ] during play or pause. view CD indicator The CD indicator on the display lights whenever the tray is in the playing position. start one touch play If the unit is in standby mode and a CD is loaded, press [CD 3/8] or [CD 1] ~ [CD 5]. The unit will come on automatically and play will start.

A CD selection and care

Only play CDs with COMPACT disc DIGITAL AUDIO trademark. (see ) Do not; Use irregularly shaped CDs. ( ) Attach extra labels and stickers. Use discs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. ( ) Attach scratch-proof covers or any other kind of accessory. Write anything on the CD. Clean CDs with liquids. (Wipe with a soft, dry cloth.) Use CDs printed with label printer available on the market.

To prevent damage

Always observe the following points. Set the system on a flat, level surface. Do not set it on top of magazines, inclined surfaces, etc. Do not move the system while tray is opening/closing, or when loaded. Always unload all CDs before moving the system. Do not put anything except a CD in the tray. Do not use cleaning CDs or CDs which are badly warped or cracked. Do not disconnect the AC power cord from the household AC outlet during CD changing operation.
STOP 7, DEMO CD CHECK CD 6
Listening to a CD placed in a specific tray
Preparation: Press [CD 3/8] and then [STOP 7, DEMO].
Placing a CD in your desired tray

Label must face upward.

Press [0 CD CHANGE]. (Within about 10 seconds) Press [CD 1] ~ [CD 5] and insert the CD on the tray. Press [0 CD CHANGE] again to close.
Repeat steps 1 and 2 to insert up to 5 CDs.

Disc tray

Tray number
Listening to the CD placed in a specific tray

0 CD CHANGE

Press [CD 1] ~ [CD 5] to start play.
The player stops after playing the last track.
To remove the CD You can change the CDs in the other trays while one CD is playing (except in All-Disc Random play or program play). Press [0 CD CHANGE]. Press [CD 1] ~ [CD 5]. Press [0 CD CHANGE] again to close the tray.
A To check which CDs are in the trays (CD CHECK)

Press [CD CHECK].

The tray with a CD being played will not open. If the player is stopped, all trays will open.
Press [CD CHECK] again to close the trays.
Do not remove or insert CDs during a CD check. Do not pull out the trays during a CD check. 8 cm (33/20) CDs cannot be checked.

Marking a track

You can mark one track each on the 5 discs loaded so that you can start play from them later. (\ page 19)

CD CHECK

30/12/03, 10:35 am
Listening to specific CDs and tracks (CD Play Mode function)
Mode 1-DISC ALL-DISC To play one selected disc. all loaded discs in succession from the selected disc to the final disc. one selected track on the selected disc. one selected disc in random order. all loaded discs in random order.
1-TRACK 1-RANDOM A-RANDOM
Press [CD 3/8] and then [7 CLEAR]. Press [PLAY MODE] to select your desired mode.
1-DISC ALL-DISC 1-TRACK A-RANDOM 1-RANDOM
If A-RANDOM was selected in this step, press the play button.
Press [DISC] and (within 10 seconds) press [1][5] to select the disc.
The CD starts if 1-DISC, ALL-DISC or 1-RANDOM was selected in step 2.
When 1-TRACK is selected in step 2 Select the track with the numeric buttons to start play.
To select track 10 or over, press [h10] then the two digits.
When 1-RANDOM or A-RANDOM is selected in step 2 Press [CD 3/8] to play CD.
Final disc For example, if play starts from disc 4, disc 3 will be the final disc. Order of progression: Disc 45123

GHI ABC DEF

Notes You can use the CD Play Mode function together with repeat play. During 1-RANDOM play or A-RANDOM play, you cannot skip to tracks which have already been played. During 1-RANDOM play or A-RANDOM play, you can search forward or backward only within the current track.
When playback ends The current play mode will be retained.

A Direct access play

Direct access allows you to start normal play from a specific track to the last track on the CD.
Press [DISC]. (Within 10 seconds or so) Press [1] ~ [5] to select the disc you want. Press the numeric button(s) to select and play your desired track number.
To select a two-digit track Press [h10] and then the two numbers you want.
Note You cannot use direct access play with 1-RANDOM or ARANDOM mode.
B Repeat play Press [REPEAT] before or during play.
REPEAT ON and are displayed. To cancel repeat play Press [REPEAT] once again. REPEAT OFF is displayed and is cleared. To repeat your favorite tracks 1.Program the tracks you want (perform steps 1 ~ 6 on page 15.) 2.Press [REPEAT] and make sure REPEAT ON and are displayed. 3.Press [CD 3/8]. Playback will start. To use repeat play with CD Play Mode function Set the desired mode, press [REPEAT] before or during playback, and make sure REPEAT ON and are displayed.

REPEAT

C CD display
This function allows you to display the remaining play time of the current track. During play or pause mode
Press [DISPLAY] to display:
Elapsed play time Remaining play time

DISPLAY

Note When track number 25 or greater is playing, remaining play time display shows : .

ALBUM CURSOR /FF /REW

TITLE SEARCH ENTER INTRO MARKER

Program play

This function allows you to program up to 24 tracks.
Press [CD 3/8] and then [7 CLEAR]. Press [PROGRAM]. Press [DISC]. (within 10 seconds or so) Press [1] [5] to select the disc you want. Press the numeric button(s) to select the desired track. Repeat steps 3 through 5 to program other tracks. Press [CD 3/8] to start play.
Action Press [PROGRAM] in the stop mode. Programmed contents will be saved in memory. Press [DEL] in the stop mode. Press [7 CLEAR]. Within 5 seconds, press the button again to clear all tracks. CLEAR ALL is displayed. Press [h10] and then the two numbers you want.

Preparation: Press [CD 3/8] and then [7 CLEAR].

Press [ALBUM (

)] to select the album.
You can also press the center button of [ ALBUM/TRACK ], followed by [4 or ] on the main unit to select an album.
Press the numeric buttons to select your desired track in the current album.
For two digit numbers, press [h10] once then the two digits. For three digit numbers, press [h10] twice then the three digits.

RQT7364-P_16-20_EN

30/12/03, 10:37 am
A INTRO function (Album scan)
Listen to the first track of all albums in the current disc for 10 seconds each to find your desired album. Preparation: Press [CD 3/8] and then [7 CLEAR].
Press [INTRO] to start INTRO function.
(INTRO function is cancelled after playing the first track in the last album on the current disc.)
While your desired album is playing, press [CD 3/8].
Play starts from the first track of the album.
To stop during the process, press [INTRO] or [7 CLEAR].
B CD Play Mode function for MP3
Mode To play one selected disc. play all loaded discs in succession from the selected disc to the final disc. play one selected track on the selected disc. play one selected album on the selected disc.
1-DISC ALL-DISC 1-TRACK 1-ALBUM
Press [PLAY MODE] to select:
1-DISC ALL-DISC 1-ALBUM 1-TRACK
Press [DISC] and (within 10 seconds) [1][5] to select and start the disc.
When you have selected 1-TRACK in step 1, press the numeric buttons to select and play will start.
For two digit numbers, press [h10] once then the two digits. For three digit numbers, press [h10] twice then the three digits. When playback ends The current play mode will be retained. When NOT MP3/ERROR1 appears on the display An unsupported MP3 format is being played. The unit will skip that track and play the next one.
Final disc For example, if play starts from disc 4, disc 3 will be the final disc. Order of progression: Disc 45123 Notes
You can use repeat mode (\ page 14) with CD Play Mode function. You cannot use program mode together with CD Play Mode function.
When you have selected 1-ALBUM in step 1. Press [ALBUM ( or )] to select and start the album.

A Program play for MP3

You can program up to 24 tracks. Preparation: 1.Press [DISC] and (within 10 seconds) [1][5] to select the disc. 2.Press [7 CLEAR].

Press [PROGRAM].

PGM appears.
Press [ALBUM ( or )] to select the album. To select an album directly, press the numeric buttons after pressing [ALBUM ( or )].
Press [4/REW/4] or [3/FF/] to select the track. To select a track directly, press the numeric buttons after pressing [4/REW/4] or [3/FF/]. Press [ENTER].
Repeat steps 2 to 4 to program other tracks.
Press [CD 3/8] to start play.
Play will start according to programmed sequence until the end.

To exit program mode.

Press [PROGRAM] in the stop mode. (You can replay your program by pressing [PROGRAM] then [CD 3/8].)
You can do the following while PGM is displayed. To check program contents add to the program clear the last track clear all programmed tracks Notes You can use repeat mode (\ page 14) with program play. You cannot program more than one CD for MP3. You cannot program CD-DA together with MP3 tracks. The program memory is cleared when you change a disc or open the CD tray. Action Press [4/REW/4] or [3/FF/] in the stop mode. Repeat steps 2~4. Press [DEL] in the stop mode. Press [7 CLEAR]. Within 5 seconds, press the button again to clear all tracks. CLEAR ALL is displayed.

7 CLEAR 3/FF/

B Album/Track title search
For album title search, press [TITLE SEARCH] once. For track title search, press [TITLE SEARCH] twice. Enter the album/track title keyword.

(\ page 19)

Press [ENTER].
Press [3/FF/] to display the next title search result. 3 NOT FOUND is displayed when there is no match.
RQT7364 RQT7364-P_16-20_EN
Press [CD 3/8] to start play from the album/track found.
Title search mode is cancelled.
To cancel partway through Press [7 CLEAR].

DEL Numeric buttons

A Entering characters
You can enter up to 9 characters for album/track title search. Press the numeric buttons to select the required character.

Numbered buttons 5 h10

Characters
Numbered Characters buttons MNO6 ABCPQRS7 DEFTUV8 GHIWXYZ9 JKL0 space ! # $ %& ( )+, . / : ; = ? _ 8
Press [3/FF/] to enter character.
Editing keywords Press [4/REW/4] or [3/FF/] to revise any characters. To delete, move the cursor over the character and press [DEL].

B Marking a track

You can mark one track each on the discs loaded so that you can start play from them later.

To mark a track number

During play or stop
For MP3, refer to Track skip play on page 16. For CD-DA, press the numbered buttons.
Select your desired track with the numeric buttons.
Hold down [MARKER] until STORING blinks on the display.

Programme the track(s) you want.
(\ steps 1 - 6 on page 15)

B Auto-off function

To save power, the unit turns off if it is left unused for 10 minutes. This function works only if CD or tape is selected as the source. This function does not work if the source is tuner or AUX.
Press [SHIFT] + [AUTO OFF].
AUTO OFF is shown on the display. To cancel Press [SHIFT] + [AUTO OFF] again to clear AUTO OFF from the display. For your reference The setting is maintained even if the unit is turned off. When the unit is turned on again, AUTO OFF is displayed and the unit functions as described above. AUTO OFF disappears from the display if either tuner or AUX is selected as the source but continues to function normally.

Using the timers

Using the play/record timer
The timer can be set as an alarm or radio recorder. Play timer and record timer cannot be used together. Preparations: Turn the unit on and set the clock (\ page 8).
Timer Play timer Record timer
Action Prepare the music source you want to listen to; tape, CD, radio or aux, and set the volume. Check the cassettes erasure prevention tabs (\ page 21), insert the cassette and tune to the radio station (\ page 10) or select the aux source (\ page 25).

For Record Timer

Press [SHIFT] + [CLOCK/TIMER] to select:
Every time you press the button: CLOCK REC PLAY

Original display

For Play Timer
Timer CLOCK PLAY REC Original display REC ON
To set the clock. set the play timer. set the record timer. resume original display.

PLAY ON

Setting the start and finish times

(Within 3 seconds)

PLAY OFF
1 Press [4/REW/4] or [3/FF/] to select the starting time. 2 Press [SHIFT] + [CLOCK/TIMER]. 1 Press [4/REW/4] or [3/FF/] to select the finishing time. 2 Press [SHIFT] + [CLOCK/TIMER].
Press [SHIFT] + [PLAY/REC] to select:

PLAY REC

Turning the timer on

REC OFF

No display (off)
To turn on the play timer. turn on the record timer. turn off.
(The indicator doesnt appear if the start and finish times or the clock havent been set.)

PLAY/ REC

Press [y] to turn off the unit and timer will start. y
Action Play will start in the set condition at the set time with volume increasing gradually to the set level. The unit comes on 30 seconds before the set time with the volume muted.

Timer Play timer

Record timer

RQT7364-P_23-25_EN

30/12/03, 10:36 am

PLAY REC No display

CLOCK/ TIMER SHIFT
To cancel the timer Press [SHIFT] + [PLAY/REC]. To change the settings when the unit is on To change play/record times source/volume Action Repeat steps 1, 2, 3, and 5 on previous page.
Press [SHIFT] + [PLAY/REC]. Make changes to the source or volume. Do steps 4 to 5 on previous page.

Sound is unfixed, reversed or comes from one speaker only. Humming heard during play. ERROR is displayed. : appears on the display. F61 is displayed. Listening to the radio Noise is heard. The stereo indicator flickers or doesnt light. Sound is distorted. A beat sound is heard. A low hum is heard during AM broadcast.
Turn the TV off or separate it from the unit. Separate the antenna from other cables and cords.
When there is a television set nearby The picture on the TV disappears or stripes appear on the screen. Using the cassette deck Recording is not possible. Playing discs The display is wrong or play wont start. The disc may be upside down. # Wipe the disc. Replace the disc if it is scratched, warped, or non-standard. Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour for it to clear and try again. The disc may be scratched, or its data may be defective. Replace the disc. If the erasure prevention tabs have been removed, cover the holes with adhesive tape. The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to an outdoor antenna. 6 The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.
The total number of tracks displayed differs each time the same disc is inserted. Unusual sound is heard. CD-RW cannot be read. VBR is displayed instead of the remaining play time.
The disc was incompletely formatted. Use the recording equipment to fully format the disc before recording. The unit cannot display the remaining play time for variable bit rate (VBR) tracks. There is a problem with the disc mechanism. (A power failure may have occurred.) The tray will open automatically. Remove the disc from the tray, and after ensuring there is no disc in the tray, close it. The unit will make the disc changing noises for a few moments and then it should operate normally. Check that the batteries are inserted correctly. 5 Replace the batteries if they are worn.
TAKE OUT/DISC appears on the display.
The remote control Remote control doesnt work.

RQT7364-P_26-28_EN

29/12/03, 2:30 pm
Warranty (ONLY FOR U.S.A)
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantera, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic Audio Products Limited Warranty
Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. Product or Part Name Audio Products (except items listed below) All Audio Racks (cabinets) Technics Stand Alone Speakers, Subwoofer Speakers USB Reader-Writer, Personal Computer Card Adapters (in exchange for defective item) Accessories: Headphones, Cartridges, Microphones, Adapters Rechargeable Batteries, DVD-R/-RAM Discs (in exchange for defective item) SD Memory Cards, Rechargeable Battery Packs (in exchange for defective item) Parts One (1) year Thirty (30) days Three (3) years Labor One (1) year Not Applicable Three (3) years Carry-In or Mail-In Service For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (1-800211-7262) or visit Panasonic web site: http://www.panasonic.com For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of media or images, data or other memory content. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, read the instructions that came with the cloth carefully.
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included).

CD SECTION

Disc CD, CD-R, CD-RW, MP3 Sampling frequency Decoding Beam source/wavelength Number of channels Frequency response Wow and flutter 8 cm/12 cm (33/20/473/100) 44.1 kHz 16 bit linear Semiconductor laser/780 nm Stereo 20 Hz20 kHz (+1dB, 2 dB) Below measurable limit

When moving the unit

Remove all discs. Press [ /I POWER] to turn the unit off. Disconnect the AC power supply cord.
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America
Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (PSC)

Panasonic Canada Inc.

5770 Ambler Drive Mississauga, Ontario, L4W 2T3 www.panasonic.ca
One Panasonic Way Secaucus, Ave. 65 de Infantera, Km. 9.5 New Jersey 07094 San Gabriel Industrial Park, Carolina, http://www.panasonic.com Puerto Rico Matsushita Electric Industrial Co., Ltd. Printed in Malaysia

L0104CP0

 

Tags

Neptune XLT1200-2004 VGN-NR21e S IDL 750 BDF452HW Enduro TX-DS797 216-404-000 Phones Elemental Evil MX-16 PC22224 Aficio270 DRX9255 Advantage ZX6 Officejet 9110 2545I KVT-617DVD LE-32R72B STR-DE405 Singer 66 BQ-390 UE55B7000 EP729 DVP-SR200P PA-250 XV-2020 Turntable HDC-SD9P Charger Urc 6017 2000S NAS ZF650 EW1170C CS-E12ekeb LE32R52BD DPF-E75 Caplio GX8 DS516 31022 SA-HT400 DSR-400PK VP211B Aqsf 129 H25C34Y Manager Imagepress 1135 1450 S Recoveryexpert HFA100 Lavw1039-W Olympus Remote TH-42PV80P Peavey PV Canon MV5I DP281B TH-37PX60EH UT13122 Pentax MZ-5 Traffic PRO PB2140 9500GS P803J EX-P505 Headset H350 System F150-2002 Extensa 5620 Minolta 7085 MW12CX-mw12C EX1011 FT700 JBL L56 Juicemaster DEH-435R TV 100 Lide90 Caprice 600 34 A NS-P230-236 ZOB551X Nikkor NN-K605 MDR-NC20 CIT300 FE-100 Galya 2500 240V FAX-phone L90 Armada 4100 KEH-P7200RDS Manual TR888 Airblade AB01 GR-DVL510u-gr-dvl510 Isotwin C24E Acer N50 Yamaha KX25 LVM-37W1 Phoneeasy 311C Speedtouch 5X6

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101