HP-1_GB Page 1 Friday, March 29, 2002 12:37 AM

ENGLISH

Owners Manual
Thank you for purchasing a Roland HP-1 Digital Piano. The HP-1 is the new entry-level model of Rolands HP series Digital Pianos. As such, it comes with all the benets: a weighted Hammer-Action keyboard, vibrant sounds and a number of useful functions.

ENGLISH ENGLISH

Authentic piano performances
A high-quality concert grand piano sound, and a keyboard thats a true pleasure to play ensure an even more realistic piano-playing experience. Thanks to its Hammer-Action keyboard, the HP-1 faithfully reproduces the feel of an acoustic piano with minute control over the sound. Captures the brilliant resonance The sound of a grand piano has a brilliant timbre because it contains a greater amount of high-frequency components. The HP-1 reproduces this characteristic of the grand piano. Extended high-frequency response One of the features of an acoustic piano is that for the strings of the highest 1 1/2 octaves, there is no damper to restrict the vibration of the strings, irrespective of whether or not the damper pedal is used. Since this also allows these strings to vibrate sympathetically with other strings, they can sometimes be heard sounding independently from the low and middleregister strings. The HP-1 faithfully simulates these characteristics of the acoustic piano (being a digital instrument, the HP-1 contains no strings, however).
Eight Tones for a wide variety of musical genres
The HP-1 comes with eight sounds (called Tones). That way, you can also use your instrument for playing harpsichord, organ, and pop/jazz music. Before using this instrument, carefully read the sections on pages 2 and 4. They provide important information concerning the proper operation of the HP-1. To get the most out of the HP-1 and to ensure many years of trouble-free service, we urge you to read through this Owners Manual thoroughly. To avoid confusion, lets agree to use the word button for all keys on the front panel, and only use key when referring to the HP-1s keyboard.

ENGLISH ENGLISH ENGLISH

Copyright 2002 ROLAND EUROPE. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland Europe S.p.a.
HP-1_GB Page 2 Friday, March 29, 2002 12:37 AM

Using the unit safely

Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers other adverse effects respect to the home furnishings, as well animals or pets. to damage or caused with and all its to domestic
The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. The G symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.

1. Important notes

Power Supply
Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system). Before connecting the HP-1 to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices.

Maintenance

To clean the unit, use a dry, soft cloth; or one that is slightly dampened. Try to wipe the entire surface using an equal amount of strength, moving the cloth along with the grain of the wood. Rubbing too hard in the same area can damage the nish. Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

Placement

Using the unit near power ampliers (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit; or move it farther away from the source of interference. This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers. Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off. Do not expose the instrument to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit (such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods of time. Excessive heat can deform or discolor the unit. To avoid possible breakdown, do not use the HP-1 in a wet area, such as an area exposed to rain or other moisture. Do not allow rubber, vinyl, or similar materials to remain on the HP-1 for long periods of time. Such objects can discolor or otherwise harmfully affect the nish. Do not put anything that contains water (e.g., ower vases) on the piano. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the unit. Swiftly wipe away any liquid that spills on the unit using a dry, soft cloth. Do not allow objects to remain on the keyboard. This can be the cause of malfunction, such as keys ceasing to produce sound. Do not paste stickers, decals, or the like to this instrument. Peeling such matter off the instrument may damage the exterior nish.

Additional Precautions

Use a reasonable amount of care when using the HP-1s buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions. When connecting/disconnecting cables, grasp the connector itselfnever pull on the cable. This way you will avoid causing shorts, or damage to the cables internal elements. A small amount of heat will radiate from the unit during normal operation. To avoid disturbing your neighbors, try to keep the units volume at reasonable levels. You may prefer to use headphones. When you need to transport the unit, pack it in shockabsorbent material. Transporting the unit without doing so can cause it to become scratched or damaged, and could lead to malfunction. Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specications, contact the manufacturer of the cable.

HP-1_GB Page 5 Friday, March 29, 2002 12:37 AM

Contents

Using the unit safely. 2 1. Important notes. 4 2. Panel descriptions. 6
2.1 Front panel. 6 2.2 Rear panel. 6

3. Main operations. 7

3.1 Connecting the power cord. 7 3.2 About the pedals. 7 3.3 Setting up the music stand. 7 3.4 Connecting optional headphones. 8 3.5 Turning the power on and off. 8 3.6 Adjusting the volume. 8 3.7 Listening to the demo songs. 9 3.8 Selecting sounds. 9 3.9 Adding Reverb. 11
4. Convenient functions. 12
4.1 About the Function mode. 4.2 Transposing (same fingering, different notes). 4.3 Master Tuning. 4.4 Changing the temperament. 4.5 Selecting the tuning curve (Stretch Tuning). 4.6 Setting the key touch. 4.7 Changing the damper pedals resonance. 4.8 Selecting the function of the left pedal. 16 16
5. Connecting to MIDI devices. 17
5.1 Selecting the MIDI transmit channel. 17 5.2 Switching Local Control on and off. 18
6. Connecting audio equipment. 19 7. Appendix. 20
7.1 Troubleshooting. 20 7.2 Specifications. 20
HP-1_GB Page 6 Friday, March 29, 2002 12:37 AM

Panel descriptions

2. Panel descriptions

2.1 Front panel

B C D E
A [Power] switch Turns the power on/off. B [Volume] knob Adjusts the overall volume level. C [Demo] button Allows you to play back the 65 pieces the HP-1 contains. By pressing it simultaneously with the [Reverb] button, you access the HP-1s Function mode (p. 12). D [Reverb] button This button has three functions. By pressing it, you switch the Reverb effect on and off. By holding it down while pressing a Tone button ([Piano 1]~[Strings]), you select the alternative for the currently active Tone. If you press it together with the [Demo] button, you access the HP-1s Function mode. E Tone select buttons These buttons are used to assign the desired sound (or Tone) to the keyboard.

2.2 Rear panel

A MIDI Out/In connectors Connect to external MIDI devices to exchange performance data. B Output jacks Allows you to connect the HP-1 to sound reinforcement equipment to obtain a more powerful sound. They can also be connected to a tape recorder or other recording device to record a performance.

1. Turn the volume all the way down. 2. Connect the headphones to either headphone socket. 3. Adjust the volume. By connecting headphones to the HP-1, you switch off its speakers, which is ideal for playing or practising without disturbing others.
Note: Be sure to use stereo headphones (Roland RH-25/50, for example).

Phone s

2. Press the [Power] switch, to turn on the power. The power switch is located to the left of the keyboard.
Note: Your HP-1 is equipped with a protection circuit. A brief interval after power-up is required before it will operate normally.

Turning off the power

1. Turn the volume all the way down. 2. Press the [Power] switch to turn off the power.

3.6 Adjusting the volume

Use the [Volume] knob to adjust the volume.
The knobs setting also determines the volume in headphones you may have connected.
HP-1_GB Page 9 Friday, March 29, 2002 12:37 AM
3.7 Listening to the demo songs
The HP-1 contains 65 internal piano pieces you may want to listen to before starting to play yourself.
Hold down [Demo] and press one of these keys.
Playing/stopping the demo songs
1. Press the [Demo] button (indicator lights). Playback of the rst demo song starts. When it is nished, the HP-1 automatically starts playback of the second song. All demo songs will be played back one after another. To listen to a specic demo song: 2. Hold down the [Demo] button and press a (keyboard) key to select another demo song. The rst 65 keys from the left allow you to directly select the song you want to listen to.
The demo songs will play back consecutively, starting with the song you selected. When the last song has been played, playback will return to the rst song and resume.
3. To stop demo song playback, press the [Demo] button and release it.
Note: All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws. Note: The data of the demo songs are not transmitted to the HP-1s MIDI OUTput.

3.8 Selecting sounds

Playing one sound at a time
The HP-1 allows you to play eight different sounds, including piano. The HP-1s sounds are called Tones.
3. Hold down [Reverb] and press the same Tone button again to select the secondary Tone (the name printed below the button you press).

1. Press the Tone button that is assigned to the Tone you want to use:
4. To return to the main Tone, repeat step (3).
As you can see, there are four Tone buttons, while there are eight Tones:
Piano Harpsichord Organ 1 Strings [Piano 2] [E.Piano] [Organ 2] [Choir].
Heres what you need to do in order to access the hidden Tones:
2. First press the Tone button that provides access to the desired Tone.
HP-1_GB Page 10 Friday, March 29, 2002 12:37 AM
Playing two sounds at a time (Dual)
It is also possible to play two Tones simultaneously (something we like to call Dual mode). A popular combination is piano with strings, but feel free to try out other combinations.

Right sound louder

Left sound louder
1. Hold down the Tone button of the rst sound you wish to use while pressing the Tone button of the sound you want to add. This only works for Tones that can be accessed via the front panel (i.e. not for the second Tone set whose names are printed below the keys). You can also modify the balance of the two Tones: 2. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators ash). 3. Press the G7 or G#7 key.
Press the white G7 key to increase the volume of the Tone assigned to the left button ([Piano1] in the above example). Press the black G#7 key to increase the volume of the Tone assigned to the right button ([Strings] in the above example).
4. Press [Demo] and [Reverb] again to leave the HP-1s Function mode.
Note: You have to leave Function mode in order to hear what you are playing.
HP-1_GB Page 11 Friday, March 29, 2002 12:37 AM

3.9 Adding Reverb

The HP-1 allows you to add reverberation to what you play on the keyboard. This effect gives the impression that you are performing in a concert hall or similar space.

Softer Reverb

Louder Reverb
Switching the Reverb effect on and off
At power-on, the digital Reverb effect is switched off. To use this effect, you need to switch it on:

Setting the Reverb level

You can also set the volume of the Reverb effect to accommodate the sound your are using. You may want to select a higher Reverb level for the Organ sounds (to simulate the reverberations of a church) than for the piano sound, for example. There are eight possible Reverb level settings. At power-on, the HP-1 selects level 3.
1. Press the [Reverb] button to switch the Reverb effect on (or off). The buttons indicator lights when the Reverb effect is on. 2. Repeat the above to switch the Reverb back off (or on) again.
3. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators ash). 4. Press a key between the A2 and the E3 (see the keyboard illustration above) to set the desired Reverb level.

Sounding the A4 note

While tuning, it is of utmost importance to compare the HP-1s tuning with that of the external instrument or device. Since the keyboard is used for setting the Function parameters, it is no longer available for playing that note the normal way. That is why there are six keys that allows you to sound the A4 note. These are the rst six keys in the tuning range indicated on p. 12:

Returning to 440Hz

Press the A1 key on the keyboard.

Return to 440Hz

The reference pitch will be set to 440.0 Hz. This is the most commonly used setting.
Setting the reference pitch to 442Hz straight away
Press these keys to sound the A4 note.
Lowering/ raising the reference pitch
The following keys (G1 and G#1) can be used for lowering or raising the HP-1s pitch in very small steps:

Higher

442Hz is a popular tuning pitch for concert grands. Rather than trying to set it using the G1 and G#1 keys, you can press the A#1 key to select that tuning right away:

Select 442Hz

The standard pitch will be set to 442Hz, and all other notes will change accordingly.
Press the G1 note to lower the reference pitch, or the G#1 note to raise it. Each time you press the G1 key, the pitch will fall by 0.1 Hz. If you continue holding the key, the pitch will continue falling. Each time you press the G#1 key, the pitch will rise by 0.1 Hz. If you continue holding the key, the pitch will continue rising.
HP-1_GB Page 14 Friday, March 29, 2002 12:37 AM
4.4 Changing the temperament
You can play classical styles such as Baroque using historic temperaments (tuning methods). Today, compositions are generally created with equal temperament in mind and are played using equal temperament. However in past ages of classical music, a variety of temperaments were used. Playing a composition with its original tuning lets you enjoy the sonorities of the chords that the composer originally intended.
1. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators ash). 2. Use the F3~B3 keys to select the temperament:
When playing with tuning other than equal temperament, you need to specify the keynote for tuning the song to be performed (that is, the note that corresponds to C for a major key or to A for a minor key). While still in Function mode, press the key that corresponds to the desired tonic:
(See p. 12 for the exact location of these keys.) You can choose from among the seven temperaments described below. [F3] Equal temperament In this tuning, each octave is divided into twelve equal steps. Every interval produces about the same amount of slight dissonance. This setting is in effect when you turn on the power. [F#3] Pythagorean This tuning, devised by the philosopher Pythagoras, eliminates dissonance in fourths and fths. Dissonance is produced by third-interval chords, but melodies are euphonious. [G3] Just (major) This tuning eliminates ambiguities in the fths and thirds. It is unsuited to playing melodies and cannot be transposed, but is capable of beautiful sonorities. [G#3] Just (minor) The Just tunings differ from major and minor keys. You can get the same effect with the minor scale as with the major scale. [A3] Mean Tone This scale makes some compromises in just intonation, enabling transposition to other keys. [A#3] Werckmeister This temperament combines the Mean Tone and Pythagorean tunings. Performances are possible in all keys (rst technique, III). [B3] Kirnberger This is an improvement of the Mean Tone and Just tunings that provides a high degree of freedom of modulation. Performances are possible in all keys (III). Initial setting: Equal temperament

Press to select C as tonic
If you choose an equal temperament, theres no need to select a keynote.
Note: When performing with other instruments, be aware that depending on the key, there may be some shifting of the pitch. Tune the HP-1 to the fundamental pitch of the other instruments.
3. Press [Demo] and [Reverb] again to leave the HP-1s Function mode.
HP-1_GB Page 15 Friday, March 29, 2002 12:37 AM
4.5 Selecting the tuning curve (Stretch Tuning)
A piano is generally tuned to a pitch with a lower bass range and a higher treble range than equal temperament. This special tuning method for pianos is called Stretch Tuning.
1. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators ash). 2. Use the A7 or A#7 key to switch the Stretch Tuning function on or off.

Stretch Tuning on

(See p. 12 for the exact location of these keys.) [A7] Off This is the standard tuning curve. This is the right choice when using Dual performance (p. 10), or when playing in ensemble with other instruments. [A#7] On This tuning curve expands the bass and treble ends somewhat. It is suitable for performances such as piano solos. This setting is in effect when you turn on the power. This effect works only with the piano tones.

Stretch Tuning off

4.6 Setting the key touch
Your HP-1 also provides a function that allows you to adapt it to your playing style, or to ensure that even your children can play loud notes. The are four Key Touch levels that can be selected once you have called up the Function mode (p. 12): Press one of the keys labeled Key Touch to select the desired level. Light: Little strength is required to play at high volumes. Medium: The keyboard reacts normally (similar to an acoustic piano). Heavy: Choose this only if you usually strike with too much force and therefore play very bright/loud notes. This is also a good setting for practising purposes. Fixed: The timbre (tone color) and volume are the same for all notes. The HP-1 is therefore no longer touch sensitive. This setting is probably only useful for the Organ 1 and Organ 2 sounds.
Note: At power-on, the HP-1 selects the Medium setting.
Note: Though Light may be a good settings for beginners, they should also try to get used to playing with the Medium setting.
HP-1_GB Page 16 Friday, March 29, 2002 12:37 AM
4.7 Changing the damper pedals resonance
On an acoustic piano, depressing the damper pedal makes the notes you play resonate with other strings, adding rich reverberations and fatness to the sound. The damper pedal on the HP-1 recreates this resonance (Sympathetic Resonance) when depressed. You can select from eight levels of depth for the resonant sound (resonance level) and even switch it off. This setting is valid only for some piano tones. It cannot be made for other Tones. (See p. 12 for the exact location of these keys.) Use the C2~G2 keys to set the desired Sympathetic Resonance level. Press the B1 key (leftmost key of the range) if you do not need this effect.

1. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators ash). 2. Use the following keys to select the desired Sympathetic Resonance setting:
Sympathetic Resonance off
4.8 Selecting the function of the left pedal
Grand pianos (and upmarket-models of the Roland HP series) have three pedals instead of two. This means that, in addition to the Damper and Soft pedals mentioned on p. 7, there is also a Sostenuto pedal. On the HP-1, you can assign this function to the left pedal, in which case the Soft function is no longer available.
Sostenuto pedal If you select this function, the left pedal allows you to sustain the notes you played at the time when you pressed the pedal. Subsequently played notes, however, will not be held. 1. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators ash). 2. Press the F7 key to select the Sostenuto function.
(See p. 12 for the exact location of these keys.)
3. To once again select the Soft function: Either press the F#7 key;
Or switch the HP-1 off and back on again.
HP-1_GB Page 17 Friday, March 29, 2002 12:37 AM
5. Connecting to MIDI devices
By connecting an external MIDI device and exchanging performance data, you can control the performances on one device from the other. For instance, you can output sound from the other instrument or switch Tones on the other instrument. MIDI stands for Musical Instrument Digital Interface, an international standard which allows performance information to be communicated among electronic musical instruments and computers. The HP-1 provides MIDI connectors, which allow performance data to be exchanged with external devices. When these connectors are used to connect the HP-1 to external devices, an even wider range of possibilities becomes available.

Connection examples

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Playing the HP-1 from a MIDI sequencer/recording an HP-1 performance on a MIDI sequencer
MT Series MT series * The MT-90s/80s has no MIDIOut connector * MT-90s/80s has no MIDI Out connector.

Out MIDI In

Switch off the Local Control function if you have connected the HP-1 to a MIDI sequencer (p. 18). Also set your MIDI sequencer to MIDI Thru mode (so that messages received at MIDI IN will be re-transmitted without change from MIDI OUT). For details, refer to the owners manual of your MIDI sequencer. Perform on the HP-1 to play a MIDI sound generator
Sound module Sound Module

THRU MIDI OUT IN

HP-1 HP-1
5.1 Selecting the MIDI transmit channel
Heres how you can set the transmit channel and make other MIDI-related settings.

Local off

8 10121315

MIDI channel

Local on
1. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators ash). 2. Press the C6~D#7 keys to select the MIDI channel. MIDI features sixteen MIDI channels, numbered 1~16. Simply connecting a cable is not enough for communication to take place. The connected devices must be set to use the same MIDI channels. Otherwise, no sound will be produced, and no sounds can be selected.
Note: The HP-1 receives on all channels 1~16.
Note: Even in Dual mode, only the channel you specify here will be transmitted.
HP-1_GB Page 18 Friday, March 29, 2002 12:37 AM
Connecting to MIDI devices
5.2 Switching Local Control on and off
When connecting a MIDI sequencer, switch off the Local Control function. As illustrated, information describing what has been played on the keyboard is passed to the internal sound generator over two different routes, (1) and (2). As a result, you hear overlapping or intermittent sounds. To prevent this from happening, route (1) must be severed, by setting the unit to what is known as Local Off.
(1) Local On On Local Sequencer

Tone generator

MIDI IN MIDI OUT
Local Control off: The keyboard and the internal sound generator are in an unlinked state. No sound will be produced by the keyboard when it is played.
No sound produced No sound produced

Local 0ff

Memory

MIDI OUT MIDI IN

(2) THRU function on On Thru function Eachis sounded twice note you play is sounded twice
When a Roland MT series instrument is connected, it is not necessary to make the Local Off setting. MT units transmit Local Off messages when their power is switched on. If you turn on the power in the order of the HP-1 MT series, Local Off will be set automatically.
Local Control on: The keyboard and the internal sound generator are in a linked state.
Produces sound Sound is emitted
1. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators ash). 2. Press the B7 or C8 key to set the Local function. (See p. 17 for the exact location of these keys.) Press the B7 key to switch the Local function off. Press the C8 key (the rightmost key) to switch the function back on again.

Local 0n

HP-1_GB Page 19 Friday, March 29, 2002 12:37 AM
6. Connecting audio equipment
You can connect audio devices to play the sound of the HP-1 through the speakers of your audio system, or to record your performance on a tape recorder or other recording device. When connecting, please use an audio cable with a standard phone plug (sold separately).
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Playing the sound of the HP-1 through the speakers of an audio system/Recording the performance of the HP-1 on a recording device
Input R/L (Line In, Aux In)
1. Set the volume of the HP-1 and of the connected devices to the minimum position.
2. Turn off the power to the HP-1. 3. Turn off the connected equipment.

Connecting to a computer

You can use a USBMIDI interface cable (sold separately) to connect the HP-1 to your computer. If the HP-1 is connected to a computer running sequencer software such as Rolands Visual MT, you can record your music. Connection examples To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. In order to make connections to your computer, you must install MIDI driver software on your computer. For details, refer to the owners manual for your MIDI interface. Use a USB MIDI interface cable to connect the USB port of your computer to the MIDI connectors of the HP-1.
USB on your USB Connector computer of your Computer UM-1, etc. Computer
Use the following procedure when turning on the power:
1. Turn on the power of the HP-1. 2. Turn on the power of the connected device. 3. Adjust the volume of each device.
When recording HP-1 performances with a cassette deck, etc.
4. Start recording on the connected device. 5. Perform on the HP-1. 6. When the performance ends, stop recording on the connected equipment.
Playing the sound of an audio device through the speakers of the HP-1
Output R/L (Line Out, Aux Out)
Use the following procedure when turning on the power.
1. Turn on the power of the connected device. 2. Turn on the power of the HP-1. 3. Adjust the volume of each device.

HP-1_GB Page 20 Friday, March 29, 2002 12:37 AM

Appendix

7. Appendix
If you are encountering problems with the HP-1, please read the section below before assuming that there is a malfunction. The piano cannot be switched on Is the power cord properly connected? (p. 7) No sound is produced Is the volume knob set to the minimum position? (p. 8) Are headphones connected? (p. 8) Did you switch off the Local function? (p. 18) The pitch of the keyboard sounds incorrect Is the Master Tuning setting correct? (p. 13) Is the Transpose setting correct? (p. 12) Did you select another temperament? (p. 14) Bass notes sound wrong/buzzing or vibration occurs If you cant hear the problem in the headphones: When playing at high volumes, resonance may occur in the piano itself or in objects near the piano. At times, other objects in the room, such as uorescent lights or glass doors, could start vibrating. This becomes more noticeable when sounding the lower frequencies at high volume. To minimize such unwanted resonance, please observe the following: Locate the instrument at least 10~15 cm away from the walls. Reduce the volume. Increase the distance from the object that is resonating. If you can hear the problem in the headphones, there may be another reason. Please contact your dealer. In the upper range, the sound changes abruptly beyond a certain key On an acoustic piano, notes in the upper one and a half octaves of the keyboard continue to sound until they decay naturally, regardless of the damper pedal. There is a difference in the timbre as well. Roland pianos faithfully simulate such characteristics of the acoustic piano. On the HP-1, the range that is unaffected by the damper pedal depends on the Key Transpose setting.

7.1 Troubleshooting

When the HP-1 is connected to an external device
No sound is produced Is the power to all equipment turned on? Are the connections between the HP-1 and the MIDI sequencer or the other external devices correct? (p. 17) Is the MIDI channel setting correct? (p. 17)

7.2 Specications

Keyboard: 88 keys, Hammer Action Touch sensitivity: Light, Medium, Heavy, Fixed Keyboard modes: Whole, Dual (adjustable volume balance) Connectors: Output jacks (L/Mono, R), Input jacks (L/Mono, R), Headphone jack x 2 (stereo), MIDI IN/ MIDI OUT connector, Pedal connector Power supply: AC230V Power consumption: 45W Dimensions: 1389.5 (W) x 443 (D) x 826 (H) mm (including stand) Weight: 45.9 kg (including stand) Accessories: Owners manual, power cord Finish: Roland Rosewood

Sound Source

Max. Polyphony: 64 voices Tones: 4 groups, 8 Tones Temperaments: 7 types, selectable tonic Stretched Tuning: 2 types Master tuning: 415.3 Hz~466.2 Hz (0.1 Hz-steps), quick recall of 440Hz and 442Hz Transpose: 6~+5 semitones Effects: Reverb (8 levels), Sympathetic Resonance (Piano only, 8 levels), Chorus (E.Piano) Preset songs: 65 songs Rated output power: 20W x 2 Speakers: 12cm x 2 Control: Volume control, Tone buttons, Reverb button, Demo button Pedals: Damper, Soft/ Sostenuto (selectable)

Note: In the interest of product improvement, the specications and/or appearance of this instrument are subject to change without prior notice.