3-294-663-11(2)

Mini HI-FI Component System

Operating Instructions

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
Notice for the customer in the countries applying EU Directives

Basic Operations

Adjusting the sound

To adjust the volume

Press VOLUME +/ (or turn the VOLUME control on the unit).

Listening to the radio

1 Select TUNER FM or TUNER AM.
Press FUNCTION +/ (or FUNCTION on the unit) repeatedly.
Using optional audio components
To connect an optional headphones
Connect headphones to the PHONES jack on the unit.

MHC-EC98P/EC78Pi

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

To add a sound effect

2 Select the tuning mode.
Press TUNING MODE repeatedly until AUTO appears.
To connect an optional component

Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.
To Generate a more dynamic sound (Dynamic Sound Generator X-tra)

Press DSGX on the unit.

3 Tune in the desired station.
Press +/ (or TUNING +/ on the unit). Scanning stops automatically when a station is tuned in, and then TUNED and ST (for stereo programs) appear.
Connect additional audio source components to the AUDIO IN jack on the unit using an analog audio cord (not supplied). Turn down the volume on the system, and then select the AUDIO IN function.

Set the sound effect

To connect a DIGITAL MEDIA PORT adaptor
To turn on the subwoofer (MHC-EC98P only)
Music discs encoded with copyright protection technologies
This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

Press SUBWOOFER ON/OFF on the unit until SUBWOOFER appears. The volume of the subwoofer is linked to the front speakers.
Connect the DIGITAL MEDIA PORT adaptor to the DMPORT on the unit. You need to connect the DIGITAL MEDIA PORT adaptor to an optional audio device (portable audio player, etc.).
Notes on DIGITAL MEDIA PORT adaptor
Available DIGITAL MEDIA PORT adaptors vary in each area. Do not connect an adaptor other than the DIGITAL MEDIA PORT adaptor. Do not connect or disconnect the DIGITAL MEDIA PORT adaptor to/from the DMPORT while the system is on. When using a DIGITAL MEDIA PORT adaptor that has video output function, connect the adaptor directly to the TV. For details about the DIGITAL MEDIA PORT adaptor, refer to the operating instructions supplied with your DIGITAL MEDIA PORT adaptor.

Playing a CD/MP3 disc

1 Select the CD function.

*MHC-EC98P only

To stop automatic scanning

Press (stop).

To tune in a station with a weak signal

2008 Sony Corporation

Printed in China

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And dont place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like.
This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior.
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

2 Place a disc.

Press (open/close) on the unit, and place a disc with the label side up on the disc tray. To place additional discs, slide the disc tray with your finger as shown below. To close the disc tray, press (open/close) on the unit. Do not force the disc tray closed with your finger, as this may damage the unit.
If TUNED does not appear and the scanning does not stop, press TUNING MODE repeatedly until MANUAL appears, and then press +/ (or TUNING +/ on the unit) repeatedly to tune in the desired station.
To reduce static noise on a weak FM stereo station
Press FM MODE repeatedly until MONO appears to turn off stereo reception.

Changing the display

To Change information on the display* Change Display mode (See below.) Press DISPLAY repeatedly when the system is turned on.
DISPLAY repeatedly when the system is turned off.

3 Select a disc.

If the discs are currently stopped, press DISC SKIP. To change discs while in other functions, press DISCon the unit. This manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names.
*For example, you can view CD/MP3 disc information, such as; rack or file number during normal play. t rack or file name ( ) during normal play. t rtist name ( ) during normal play. a lbum or folder name ( a ) during normal play. otal playing time while the player is stopped. t

4 Start playback.

Press (play). To exchange other discs during playback, press EXCHANGE on the unit.
To Pause playback Press (pause). To resume play, press the button again. (stop).
The system offers the following display modes.
Display mode Power Saving Mode1) When the system is off, The display is turned off to conserve power. The timer and clock continue to operate. The clock is displayed.

Before using the system

Clock2)
Hooking up the system securely
When carrying this system
1 Remove all discs to protect the CD mechanism. 2 Press FUNCTION +/ (or FUNCTION on the unit)
repeatedly to select the CD function. STANDBY appears.

To use the remote

Stop playback Select a folder on an MP3 disc Select a track or file Find a point in a track or file

You cannot set the clock in Power Saving Mode. The clock display automatically turns to Power Saving Mode after eight seconds.
Slide and remove the battery compartment lid , and
insert the two R6 (size AA) batteries (supplied), side first, matching the polarities shown below.
+/ (select folder). / (go back/go forward) (or / on the unit). Hold down / (rewind/fast forward) during playback, and release the button at the desired point. REPEAT repeatedly until REP or REP1 appears.
Notes on the display information
3 Hold down and on the unit until 4 After LOCK appears, unplug the power cord.
FM lead antenna (Extend it horizontally.)

Select Repeat Play

Antennas
Subwoofer (MHC-EC98P only)

AM loop antenna

Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise.
Place the subwoofer vertically to obtain a better bass reproduction. Also, position the subwoofer: n a solid floor where resonance is unlikely to occur. o t least a few centimeters away from the wall. a way from the center of the room or place a bookshelf against a a wall, to avoid generating a standing wave.

To change the play mode

Notes on using the remote
With normal use, the batteries should last for about six months. Do not mix an old battery with a new one or mix different types of batteries. If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. Batteries installed devices shall not be exposed to excessive heat such as sunshine, fire or the like.

Speaker pads

Press PLAY MODE repeatedly while the player is stopped. You can select normal play (no display for all discs or 1 DISC for a disc or for all MP3 files in the folder on the disc), shuffle play (SHUF for all discs shuffle, 1 DISC SHUF for one disc shuffle or SHUF* for folder shuffle), or program play (PGM).

Notes on Repeat Play

Characters that cannot be displayed appear as _. The following are not displayed; otal playing time for an MP3 disc. t emaining playing time for an MP3 file. r The following are not displayed correctly; lapsed playing time of an MP3 file encoded using VBR (variable e bit rate). older and file names that do not follow either ISO9660 Level1, f Level 2 or Joliet in the expansion format. The following are displayed; otal playing time for a CD-DA disc when the play mode is t 1DISC. emaining playing time for a track. r D3 tag information for MP3 files when ID3 version 1 and I version2 tags are used (ID3 version 2 tag information display has priority when both ID3 version 1 and version 2 tags are used for a single MP3 file). p to 15 characters of ID3 tag information using uppercase letters u (A to Z), numbers (0 to 9), and symbols (< > * + , / @ [ \ ] _).

Attach the supplied speaker pads to the bottom of the front speakers and subwoofer to prevent slipping.

To set the clock

*When playing a CD-DA disc, (SHUF) Play performs the same operation as 1 DISC (SHUF) Play. All tracks or files on a disc are played repeatedly up to five times. You cannot select REP and SHUF (all discs shuffle) at the same time. REP1 indicates that a single track or file is repeated until you stop it.

1 Turn on the system.

Press (on/standby) to turn on the system.
2 Select the clock set mode.
Speakers Subwoofer (MHC-EC98P only)
Insert only the stripped portion of the cord. Front speakers: 4 pads for each speaker Subwoofer: 4 pads (MHC-EC98P only)
Press TIMER MENU. The hour indication flashes. If PLAY SET flashes, press / repeatedly to select CLOCK, and then press (enter).
Notes on playing MP3 discs

3 Set the time.

Press / repeatedly to set the hour, then press (enter). The minute indication flashes. Use the same procedure to set the minutes.
The clock settings are lost when you disconnect the power cord or if a power failure occurs.
Connect the subwoofer to the SUBWOOFER jack with the subwoofer cable.
Right speaker (High freq.)
Connect the power cord to a wall socket. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor).
Right speaker (Low freq.) Solid (Blue/) Left speaker (High freq.) Solid (Gray/) Solid (Red/) Wall socket Left speaker (Low freq.)
Do not save other types of tracks or files or unnecessary folders on a disc that has MP3 files. Folders that have no MP3 files are skipped. MP3 files are played back in the order that they are recorded onto the disc. The system can only play MP3 files that have a file extension of.MP3. If there are files on the disc that have the.MP3 file extension, but that are not MP3 files, the unit may produce noise or may malfunction. The maximum number of: olders is 150 (including the root folder). f P3 files is 255. M P3 files and folders that can be contained on a single disc is 300. M older levels (the tree structure of files) is 8. f Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all.

Notes on playing multisession discs
If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and playback continues until another session is encountered. A disc with a mixed CD format is recognized as a CD-DA (audio) disc.

Solid (Black/)

Other Operations
Creating your own CD program (Program Play)
Use buttons on the remote to create your own program.

Using the timers

The system offers two timer functions. If you use both timers, the Sleep Timer has priority. Use buttons on the remote to use the timer functions.

Troubleshooting

1 Make sure the power cord and speaker cords are
correctly and firmly connected.
To change the AM tuning interval
The AM tuning interval is factory-preset to 9 kHz or 10 kHz. Use buttons on the unit to change the AM tuning interval.

Precautions

Discs that this system CAN play
Audio CD CD-R/CD-RW (audio data/MP3 files)

Specifications

Main unit Amplifier section MHC-EC98P
The following are measured at AC 240V, 50/60Hz Front Speaker Power output (rated): Low channel 55 W + 55 W (at 8 , 1 kHz, 1% THD) High channel 55 W + 55 W (at 8 , 8 kHz, 1% THD) RMS output power (reference): Low channel 75 W + 75 W (per channel at 8 , 1 kHz, 10% THD) High channel 75 W + 75 W (per channel at 8 , 8 kHz, 10% THD) Subwoofer RMS output power (reference): 130 W (at 4 , 80 Hz, 10% THD)

Sleep Timer:

2 Find your problem in the checklist below, and take
1 Tune in any AM station, and then turn off the

system.

1 Press FUNCTION +/ (or FUNCTION on the unit)
repeatedly to select the CD function. while the player is stopped.
2 Press PLAY MODE repeatedly until PGM appears 3 Press DISC SKIP to select a disc. 4 Press / (or / on the unit)
You can fall asleep to music. This function works even if the clock is not set. Press SLEEP repeatedly. If you select AUTO, the system automatically turns off after the current disc stops or in 100 minutes.
the indicated corrective action. If the issue persists, contact your nearest Sony dealer.
If PROTECT appears on the display
2 Press DISPLAY to display the clock. 3 While holding down TUNING + , press .
All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure.
Discs that this system CANNOT play

Play Timer:

You can wake up to CD or tuner at a preset time. Make sure you have set the clock.
repeatedly until the desired track number appears. When programming MP3 files, press +/ repeatedly to select the desired folder, and then select the desired file.
Selected track or file number
1 Prepare the sound source.
Press VOLUME +/ (or turn VOLUME on the unit) to adjust the volume. To start from a specific CD track or MP3 file, create your own CD program.

Immediately unplug the power cord, and check the following items after PROTECT disappears. Are the + and speaker cords short-circuited? Is anything blocking the ventilation holes on the top or back of the system? After you have checked these above items and found to be all right, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer.
To improve tuner reception
Turn off CD player power by using the CD power management function. By default, CD power is turned on.
repeatedly to select the CD function.
2 Press TIMER MENU. 3 Press / repeatedly to select PLAY SET, then
Total playing time of the selected track

General

The system does not turn on.
Is the power cord plugged in?
2 Press to turn off the system. 3 After STANDBY stops flashing, press DISPLAY
. press ON TIME appears, and the hour indication flashes.
5 Press to add the track or file to the program. 6 Repeat steps 3 through 5 to program additional
tracks or files, up to a total of 25 tracks or files.
4 Set the time to start playback. Press / repeatedly to set the hour, then press

There is no sound.

The minute indication flashes. Use the procedure above to set the minutes.
Are the + and speaker cords short-circuited? Are you using only the supplied speakers? Is anything blocking the ventilation holes on the top or back of the system?
to display the clock, and then press while holding down . CD POWER OFF appears. With CD player power turned off, disc access time is increased. To turn on CD player power, repeat the procedure until CD POWER ON appears.
CD-ROM CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level1/ Level 2, Joliet CD-R/CD-RW recorded in multisession that have not ended by closing the session CD-R/CD-RW of poor recording quality, CD-R/ CDRW that have scratches or are dirty, or CD-R/CDRW recorded with an incompatible recording device CD-R/CD-RW which is finalized incorrectly Discs containing files other than MPEG 1 Audio Layer3 (MP3) files Discs of non-standard shape (for example, heart, square, star) Discs that have adhesive tape, paper, or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched

MHC-EC78Pi

Power output (rated): Low channel 50 W + 50 W (at 8 , 1 kHz, 1% THD) High channel 50 W + 50 W (at 8 , 8 kHz, 1% THD) RMS output power (reference): Low channel 70 W + 70 W (per channel at 8 , 1 kHz, 10% THD) High channel 70 W + 70 W (per channel at 8 , 8 kHz, 10% THD)

Inputs

AUDIO IN (stereo mini jack): Sensitivity 800 mV, impedance 22 kilohms PHONES (stereo mini jack): Accepts headphones with an impedance of 8 or more SPEAKER: impedance 8 SUBWOOFER OUT (MHC-EC98P only): impedance 4

Outputs

To reset the system to factory settings

Notes on discs

To play your program of tracks or files, press . The program remains available until you open the disc tray. To play the same program again, select the CD function, and then press .
5 Use the same procedure as in step 4 to set the time

to stop playback.

Sound comes from one channel, or the left and right volumes are unbalanced.
Place the speakers as symmetrically as possible. Connect only the supplied speakers.
If the system still does not operate properly, reset the system to factory settings. Use buttons on the unit to reset the unit to its factory default settings.
6 Select the sound source.
Press / repeatedly until the sound source you. The display want appears, and then press shows the timer settings.
1 Disconnect and reconnect the power cord, and then

turn on the system.

To cancel Program Play

Severe hum or noise.

2 Press , FUNCTION , and at the same
time. All user-configured settings, such as preset radio stations, timer, and the clock, are deleted.
Before playing, wipe the disc with a cleaning cloth from the center out to the edge. Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or antistatic spray intended for vinyl LPs. Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.

CD player section

System: Compact disc and digital audio system Laser: Semiconductor laser (=nm) Emission duration: continuous Frequency response: 20 Hz 20 kHz Signal-to-noise ratio: More than 90 dB Dynamic range: More than 88 dB
Press PLAY MODE repeatedly until PGM disappears while the player is stopped.
7 Press to turn off the system.
If the system is on at the preset time, the Play Timer will not play.
To delete the last track or file of the program
Press CLEAR while the player is stopped.
Move the system away from sources of noise. Connect the system to a different wall socket. Install a noise filter (available separately) to the power cord.

Tuner section

On safety
To view program information, such as total track number of the program
Press DISPLAY repeatedly.
To activate or check the timer again
The remote does not function.

1 Press TIMER MENU.

SELECT flashes.
Presetting radio stations
You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number.
2 Press. 3 Press / repeatedly to select PLAY SEL, and

then press

Remove any obstacles between the remote and the remote sensor on the unit, and position the unit away from fluorescent lights. Point the remote at the systems sensor. Move the remote closer to the system.

Messages

CANNOT LOCK : The system cannot be locked after you have done the procedure of When carrying this system. COMPLETE : The preset operation ended normally. FULL : You tried to program more than 25 tracks or files (steps). LOCKED : The disc tray does not open. Contact your nearest Sony dealer. NO DISC : There is no disc in the player, or you have loaded a disc that cannot be played. NO STEP : All of the programmed tracks have been erased. OVER : You have reached the end of the disc while pressing during playback or pause. PUSH STOP : You pressed PLAY MODE during playback. PROTECT : The following causes can be considered: peaker cords may be short-circuited. S e ventilation holes may be blocked. Th See If PROTECT appears on the display to check what to do if this message appears. READING : The system is reading information from the disc. Some buttons are not available. TIME NG : The Play Timer start and end times are set to the same time.

CD/MP3 player

The sound skips, or the disc will not play.
Wipe the disc clean, and replace it. Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip.

To cancel the timer

The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. AC power cord must be changed only at the qualified service shop.

FM stereo, FM/AM superheterodyne tuner Antenna: FM lead antenna AM loop antenna FM tuner section: Tuning range: 87.5 108.0 MHz (50 kHz step) Intermediate frequency: 10.7 MHz AM tuner section: Tuning range Australian model: 531 1,710 kHz (with 9 kHz tuning interval) 530 1,710 kHz (with 10 kHz tuning interval) The UK model: 531 1,602 kHz (with 9 kHz tuning interval) Intermediate frequency: 450 kHz
Speaker Front Speaker (SS-EC78S) for MHC-EC98P/EC78Pi
Speaker system: 3 way 3 Drivers speaker system, Bass reflex Speaker unit Subwoofer: 13 cm, cone type Woofer: 13 cm, cone type Tweeter: 4 cm, horn type Rated impedance High frequency: 8 ohms Low frequency: 8 ohms Dimensions (Approx.): 220 mm (w/h/d) Mass (Approx.): 3.5 kg
Repeat the same procedure as above until OFF appears. in step 3, and then press

On placement

1 Tune in the desired station (See Listening to the

radio).

To change the setting

Start over from step 1.

The Play Timer setting remains as long as the setting is not canceled manually.

2 Press TUNER MEMORY.

Preset number
Play does not start from the first track.
Return to Normal Play by pressing PLAY MODE repeatedly until both PGM and SHUF disappear.
3 Press +/ (or TUNING +/ on the unit)
Starting playback takes more time than usual.
repeatedly to select your desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations.
4 Press. 5 Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs.
The following discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc recorded in multisession mode. a disc that has not been finalized (a disc to which data can be added). a disc that has many folders.
Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates.

Subwoofer (SS-WG98S) for MHC-EC98P only
Speaker system: Subwoofer speaker system, Bass reflex Speaker unit Subwoofer: 20cm, cone type Rated impedance: 4 ohms Dimensions (Approx.): 310 mm (w/h/d) Mass (Approx.): 5.6 kg
General Power requirements:
Australian model: AC V, 50/60 Hz The UK model: AC 230 V, 50/60 Hz

On heat buildup

The disc tray does not open and LOCKED appears.
Contact your Sony dealer or local authorized Sony service facility.
Heat buildup on the unit during operation is normal and is not cause for alarm. Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. Do not obstruct the ventilation holes.
Power consumption: MHC-EC98P
160 W 0.5 W (in Power Saving Mode)
Dimensions (w/h/d) (excl. speakers): MHC-EC98P
Approx. 430 mm Approx. 415 mm

On the speaker system

6 To call up a preset radio station, press TUNING
MODE repeatedly until PRESET appears, and then press +/ (or TUNING +/ on the unit) repeatedly to select the desired preset number.
Severe hum or noise, or stations cannot be received. (TUNED or ST flashes on the display.)
Connect the antenna properly. Find a location and an orientation that provide good reception, and then set up the antenna again. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. Turn off nearby electrical equipment.
This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV.
Mass (excl. speakers): MHC-EC98P
Approx. 7.0 kg Approx. 6.1 kg

Cleaning the cabinet

Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol.
Supplied accessories: Remote Commander (1)/R6 (Size AA) batteries (2)/FM lead/AM loop antenna (1)/Speaker pads MHC-EC98P (8) and for SS-WG98 (Subwoofer) (4), MHC-EC78Pi (8)/TDM-iP10 (M) (MHC-EC78Pi only)(1) Design and specifications are subject to change without notice.

Standby power consumption: 0.5 W Halogenated flame retardants are not used in the certain printed wiring boards. Halogenated flame retardants are not used in cabinets.