Reviews & Opinions
Independent and trusted. Read before buy Tomtom N14644!

Tomtom N14644

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
Tomtom N14644 GPS, size: 1.1 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Tomtom N14644About Tomtom N14644
Here you can find all about Tomtom N14644 like price and other informations. For example: battery, accessories, mount, software, reset, update, gps, review, manual.

Tomtom N14644 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Tomtom N14644 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Tomtom N14644 photo ]

Video review

Tom Tom One N14644 GPS Demonstration

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1.
Melissa 9:53pm on Monday, July 25th, 2011
my stopped working on its own and we only got it last Christmas and cannot find anyone to help me with it

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

TomTom ONE

Whats in the box

EasyPortTM mount

Car Charger
RDS-TMC Traffic Receiver*

Documentation pack

USB cable
* Not included with all products.

Getting started

Install your TomTom ONE in your car following the instructions on the installation poster at the start of this book. To switch on your TomTom ONE, press and hold the On/Off button for 2 seconds. The first time you switch on your device, it may take a short while to start. You have to answer a few questions to set up your device.

Having problems?

In rare cases, your ONE may not start correctly or may stop responding to your taps. First, check that the battery is charged properly. To fully charge the battery, you need to charge it for at least 2 hours. If this doesnt work, you can reset your device. To do this, press and hold the Power button for fifteen seconds. Release the Power button when device begins to restart.

Charging your TomTom ONE

Before you use your ONE for the first time, its a good idea to charge it fully using the home charger, which takes about 2 hours. There is no charging light on your ONE. To check the battery status and see when your ONE is charging, switch on your device and tap the bottom righthand corner of the screen in the Driving View. The battery status is shown on the next page.

Improving reception

If your TomTom ONE takes longer than 5 minutes to find your current position, make sure that the device is in an open space away from tall objects such as buildings or trees. When you connect your TomTom ONE to your computer, you can use TomTom HOME to download information about GPS satellite positions during the next 7 days. This helps your ONE to find your position faster. Important: Some vehicles have heat reflective shielding in the windshield. This may prevent your ONE from locating your current position.
Take care of your TomTom ONE
Never leave your TomTom ONE or accessories in view when you leave the car or they may become an easy target for thieves.
You can set a password for your TomTom ONE which must be entered every time you start your ONE. It is important to take care of your ONE. Your ONE is not designed for use in extreme temperatures and any such exposure may cause permanent damage. Do not open the casing of your ONE under any circumstances. Doing so may be dangerous and will invalidate the warranty. Wipe or dry the screen of your ONE using a soft cloth. Do not use any liquid cleaners.

Driving View

When your TomTom ONE starts, you are shown the Driving View along with detailed information about your current location. Tap the center of the screen at any time to open the Main Menu. Note: The Driving View is shown in black and white until your ONE locates your current position.
A Tap + and - to zoom in and out. B Your current position. C The name of the next major road or road sign information, if applicable. D Traffic bar - requires an RDS-TMC Traffic Receiver (available as an accessory). E Navigation instruction for the road ahead. Tap this area to repeat the last spoken instruction and to change the volume. F The name of the street you are on. G Information about your trip such as trip time, remaining distance and arrival time. To change the information shown, tap Status bar preferences in the Preferences menu. H GPS signal strength.

Making your first trip

Planning a route with your TomTom ONE is easy. To plan your first route, follow the steps below. Important: You should always plan your journey before you start driving. It is dangerous to plan a route while driving. 1. Tap the screen to bring up the main menu. Note: The buttons on your ONE are shown in full color unless a button is currently unavailable. For example, the button named Find alternative. in the Main Menu is not available until you have planned a route. 2. Tap Navigate to.

3. Tap Address.

When you enter an address, you can choose from the following options: City center - tap this button to set your destination as the center of a city or town. Street and house number - tap this button to set an exact address as your destination. ZIP code - tap this button to enter a ZIP code as your destination. Note: You can enter a ZIP code for any country. In the UK and the Netherlands, ZIP codes are detailed enough to identify a house on their own. In other
countries you can enter a ZIP code to identify a town or area. You will then have to enter a street and house number. Cross street or intersection - tap this button to set your destination as the point where two streets meet. In this example, we will enter an exact address. 4. Tap Street and house number.

More information about a route
You can access these options for the route you last planned by tapping the Details button on the route summary screen. You can then select from the following options: Tap this button for a list of all the turn instructions on the route. This is very useful if you need to explain a route to someone else.

Browse as text

Tap this button to see each turn in the trip. Tap the right and left arrows to move forwards and backwards through the trip.

Browse as images

Tap the screen to turn off the 3D display and view the map from above. Tap this button to see an overview of the route using the map browser.

Browse map of route

Tap this button to open the route summary screen.

Show route summary

Finding alternative routes
Once you have planned a route, you may want to change something about the route, without changing your destination.

Why change the route?

Maybe for one of these reasons: You can see a roadblock or a line of traffic ahead. You want to travel via a particular location, to pick someone up, stop for lunch or fill up with gas. You want to avoid a difficult intersection or a road you dont like. Tap Find alternative. in the Main Menu to change the route that is currently planned.

Find alternative.

Then tap one of the options below.
Tap this button to calculate an alternative to the route already planned.

Calculate alternative

Your ONE will look for another route from your current location to your destination. If you decide you would prefer to use the original route after all, tap Recalculate original. Why would I need to do this? Apart from the roads near your position and near your destination, the new route will use totally different roads to reach your destination. This is an easy way of calculating a totally different route. Tap this button if you can see a roadblock or a line of traffic ahead. You then have to choose how much of the route ahead you want to avoid.

Avoid roadblock

Choose from the different options: 100m, 500m, 2000m, 5000m. Your ONE will recalculate your route avoiding the section of the route for the distance you selected. Dont forget that once a new route is calculated, you may have to turn off the road you are on very soon. If the roadblock suddenly clears, tap Recalculate original to return to your original route.
Tap this button to change your route so that it passes a particular location, perhaps to pick someone up on the way.

Travel via.

You choose the location you want to pass in the same way as you choose a destination. So you can select from all the same options: for example, Address, Favorite, Point of Interest and Point on map. Your ONE will calculate a new route to your destination that passes the location you chose. Unlike your final destination, your ONE does not inform you when you pass by this location. Tap this button to return to the original route without deviations to avoid roadblocks or traveling via particular locations.

Recalculate original

Tap this button to avoid a part of the route. Use this button if you see that your route includes a road or junction you dont like, or which is wellknown for traffic problems.

Avoid part of route

You then choose the road you want to avoid from a list of the roads on your route. Tap this button to recalculate your route so that it avoids traffic problems as much as possible. Your ONE will check if there are any traffic problems on your route and work out the best route to avoid the problems.

Minimize delays

Note: This button is only available with TomTom Traffic enabled.

Sounds and voices

The sound on your TomTom ONE is used for features such as: Spoken instructions Warnings
How do I change the volume level?
You can change the volume in three ways: Tap the bottom left hand area of the Driving View. The last spoken instruction is repeated and the volume level is shown. Move the volume slider to adjust the volume. In the Main Menu, tap Change preferences, then tap Volume preferences. Tap Test to check your changes.

Selecting a voice

To change the voice being used by your TomTom ONE, tap Voice preferences in the Preferences menu, then tap Change voice. Select a voice from the list.

Voice preferences

Help me!
Help me! provides an easy way to navigate to emergency services centers and other specialist services and contact them by phone. For example, if you are involved in a car accident, you could use Help me! to call the nearest hospital and tell them your exact location.

How do I use Help me! to call a local service?
You can use Help me! to find and make contact with a service center. To use Help me! to locate a service center, contact the center by phone and navigate from your current location to the center, do the following: 1. Tap the screen to bring up the main menu. 2. Tap Help me! 3. Tap Phone for help. 4. Select the type of service you require, for example, Nearest hospital. 5. To dial, select a center from the list, the nearest is shown at the top of the list. Once the call is answered your ONE shows your position on the map along with a description of the location. This helps you explain where you are while making a call. 6. To navigate your way to the center on foot, tap Walk there. Your ONE starts guiding you to your destination.

Options

Use your TomTom ONE to find the location of a service and the contact details.

Phone for help

Emergency services Emergency breakdown services Nearest police station Nearest doctor Nearest hospital Nearest public transport Nearest car repair services Nearest dentist Nearest pharmacy Nearest vet Note: In some countries, information may not be available for all services. Use your TomTom ONE to navigate your way by road to a service center. Nearest car repair services Nearest hospital Nearest doctor Nearest police station Nearest pharmacy Nearest dentist Note: In some countries, information may not be available for all services. Use your TomTom ONE to navigate your way on foot to a service center. Nearest gas station Nearest public transport Nearest police station Nearest pharmacy Home Nearest doctor Note: In some countries, information may not be available for all services. Your TomTom ONE shows your current location. You can then tap Phone for help to select the type of service you want to contact.

Drive to help

Walk to help

Where am I?

Tap this button to read the British Red Cross First Aid guide.

First Aid Guide

Tap this button to read a selection of useful guides.

Other guides

Favorites

What are Favorites?

Favorites are places that you often visit. You can create Favorites so that you dont have to enter the address every time you want to navigate there. They dont have to be places you especially like, just useful addresses.

How can I change the name of a Favorite?
1. Tap the screen to bring up the main menu. 2. Tap Change preferences to open the Preferences menu. 3. Tap Manage Favorites. 4. Tap the Favorite you want to rename. 5. Tap Rename.
How can I delete a Favorite?
1. Tap the screen to bring up the main menu. 2. Tap Change preferences to open the Preferences menu. 3. Tap Manage Favorites. 4. Tap the Favorite you want to delete. 5. Tap Delete.

Browse map

To look at the map in the same way as you might look at a traditional paper map, tap Browse map in the Main Menu. You can move the map by touching the screen and moving your finger across the screen.
A The scale bar B Your current position. C GPS button Tap this button to center the map on your current position. D Options E The cursor F The Find button Tap this button to find specific addresses. G The Cursor button Tap this button to navigate to the cursor position, make a Favorite of the cursor position, or find a Point of Interest near the cursor position. H The zoom bar Zoom in and out by moving the slider.

Cursor button

You can use the cursor to find addresses and Points of Interest (POIs), for example, restaurants, train stations and gas stations.
Position the cursor over a location on the map, then tap one of the following buttons: Tap this button to navigate to the cursor position. Your ONE will calculate the route.

Navigate there

Tap this button to find a POI near the cursor position. For example, if you have found a restaurant to go to, you can search for a parking garage nearby.

Find POI nearby

Tap this button to bring the location currently highlighted by the cursor to the center of the screen when looking at the map.

Center on map

Tap this button to create a Favorite at the cursor position.

Add as Favorite

Tap this button to correct the location shown at the cursor position.

Correct location

Points of Interest
Points of Interest or POIs are useful places on the map. Here are some examples: Restaurants Hotels Museums Parking garages Gas stations

Navigating to a POI

You can use a POI as your destination. For example, if you are traveling to an unfamiliar city, you could choose a POI to help find a parking garage. 1. Tap the screen to bring up the main menu. 2. Tap Navigate to. in the Main Menu. 3. Tap Point of Interest. 4. Tap POI in city. 5. Narrow your choice of POIs by selecting the area where the POI is located. You can select one of these options: POI near you - to choose from a list of POIs near to your current location. POI in city - to find a POI in a particular town or city. POI near Home - to choose from a list of POIs near to your Home location. You can select from a list of POIs which are along your route or close to your destination. Choose from one of these options: POI along route POI near destination Note: The last POI you viewed is also shown so that you can plan a route there more quickly. 6. Type the name of the town you want to visit and select the town when it appears in the list. 7. Select the category of POI: Tap Any POI category to search for a POI by category name. Tap the category of POI, if it is shown.

Tap the arrow to choose from the complete list of categories. Select the category from the list or start to type the name of the category and select it when it appears in the list. 8. Tap Parking garage. 9. From the list of POIs shown, select the POI you want to navigate to. The table below explains the distances listed next to each POI. POI near you POI in city POI near Home POI along route POI near destination Distance from your current location Distance from the city center Distance from your Home location Distance from your current location Distance from your destination
If you know the name of the POI, tap Find and type the name. Select it from the list when it is shown. The next screen shows more detailed information including the location of the POI on the map and the phone number of the POI, if available. Tap Select to confirm you want to plan a route to this POI. Once you have selected a POI, the route to the POI is calculated by your TomTom ONE.

Showing POIs on the map

1. Tap Show POIs on map in the Preferences menu.

Show POI on map

2. Select the POI categories to display on the map. Tap Find to search for a POI by name. 3. Tap Done. The POIs you have selected are shown as symbols on the map.
How can I set warnings for POIs?
1. Tap the screen to bring up the main menu. 2. Tap Change preferences. 3. Tap Warn when near POI.
Tap this button to receive a warning when you travel near to the location of a POI.

Warn when near POI

4. Select the category of POI you want to be warned about. Select the category from the list or start to type the name of the category and select it when it is shown in the list. 5. Set how close the POI should be when you receive a warning. 6. Choose the warning sound for the category of POI you selected.

Preferences

Use night colors / Use day colors
Tap this button to reduce the brightness of the screen and show darker colors on the map. When should I use this?

Use night colors

When its dark, it is easier to see the screen if the display on your ONE is not brightly lit. To change back to a brighter screen showing brighter colors on the map, tap Use day colors.

Use day colors

Tap this button to set which categories for the Points of Interest (POIs) should be shown on the map: 1. Tap Show POIs on map in the Preferences menu.

2. Select the POI categories to display on the map. Tap Find to search for a POI category. 3. Tap Done. The POIs you have selected are shown as symbols on the map.

Safety preferences

Tap this button to set the following safety preferences: Hide most menu options while driving
Suggest driving breaks Show safety reminders Warn when near places of worship or schools Warn when driving faster than allowed Warn when driving faster than a set speed Warn not to leave the device in the car If you select one or more of the warnings, you will also be asked to select a sound to be played whenever a warning is displayed. Select whether or not your TomTom ONE should warn you about which side of the road you should be driving on. Decide if you want the map display to be turned off in special circumstances and press Done. What happens when I use the Turn off map display option? When you turn off the map display, instead of seeing your position on a map in the Driving View, you will only see information about the next instruction. Tap the button and select an option for when the map should be turned off. These are the options: Always - The map will not be shown and you will only see information about the next instruction and arrows showing direction. Above a certain speed - you set the speed at which point the map will be turned off. This option is useful for situations when the map might be distracting, such as when you are driving fast. Never - the map is never turned off.

Guided tours

Tap this button to show one of the Guided tours on how to use your TomTom ONE.
Turn off sound / Turn on sound
Tap this button to turn off sound. If you turn off the sound, warnings for upcoming POIs are also turned off. The button changes to Turn on sound.

Turn off sound

Tips To change the volume, tap Volume preferences in the Preferences menu. To change the volume quickly while you are driving, tap the bottom lefthand section of the Driving View and move the slider. To change the voice being used by your ONE, tap Change voice in the Voice preferences menu.

Volume preferences

Tap this button to change the volume.

Manage Favorites

Operate left-handed / Operate right-handed
Tap this button to move important buttons, for example, the Done and Cancel buttons as well as the zoom bar, to the left hand side of the screen. This makes it easier to tap the buttons with your left hand without blocking the screen.

Operate lefthanded

To move the buttons back to the right hand side of the screen, tap Operate right-handed.

Brightness preferences

Tap this button to set the brightness of the screen. Move the sliders to set the brightness separately for day map colors and for night map colors.
You can set the map color scheme by tapping Change map colours.

Change map colors

Tap this button to select the color schemes for day and night map colors. You can also download more color schemes from TomTom Services.

Set units

Tap this button to set the type of units that will be shown for the following: Distance
Time Latitude and longitude Temperature Air pressure

Set clock

Tap this button to select the type of clock that is shown and set the time. The easiest way to set the time is by tapping the Sync button. Your ONE will then take the time from GPS information.
Note: After using Sync to set the time, you may have to adjust the hours depending on your time zone. Your ONE works out your time zone and always keeps the time correct using GPS information. You can only use Sync if you have GPS reception, so you cannot set the clock in this way when you are indoors.

Keyboard preferences

You use the keyboard to enter your destination or to find an item in a list, such as a POI. Tap this button to select the size of the keys on the keyboard and the keyboard layout. You can select from two sizes: Large keyboard Small keyboard Three keyboard layouts are available: ABCD keyboard QWERTY keyboard AZERTY keyboard

Compass preferences

Tap this button to configure the compass. The following options are available: None - the compass is not shown.
One with arrow pointing north - the arrow always points towards north and the direction you are moving is shown at the top of the compass. One with arrow showing your heading - the arrow always shows the direction you are moving. If you select one of these options, you then need to select the features that are shown in the middle of the arrow: Direction - your direction is shown as a compass point, displayed in the center of the compass arrow. Degrees - your direction is shown as compass degrees, displayed in the center of the compass arrow. Nothing One with arrow pointing to your destination - the arrow always points towards your destination. The distance to your destination is displayed in the compass arrow.

Receiving the latest map updates
When you connect your TomTom ONE to your computer, TomTom HOME automatically downloads any available map updates and sends any changes you have made, to the Map Share community. There are several types of updates which can be set in the Correction preferences menu.
Marking a map error while on the move
If you notice an item on your map that needs attention, you can mark the location using the Report button and then enter the details when you are no longer driving. To show the Report button in the Driving View, do the following: 1. Tap Map corrections in the Main Menu. 2. Tap Correction preferences. 3. Tap Done and then tap Done again. 4. Select Show report button, then tap Done. The Report button is shown on the left-hand side of the Driving View. After you mark a location, you can add more information about the change when you open the Map corrections menu. For example, you are driving to a friend's house and you notice that the name of the street you are on is different from the one on your map. To report the change, tap the Report button and your ONE will save your current location. You can then send the update to TomTom Map Share when you have finished your trip.
TomTom Map Share community
To join the Map Share community, do the following: 1. Tap Map corrections in the Main Menu. 2. Tap Download corrections made by others. 3. Tap Join.
When you connect your TomTom ONE to computer, TomTom HOME automatically downloads any available map updates and sends any changes you have made, to the Map Share community.
Changing my preferences for map updates
Correction preferences is used to set the way TomTom Map Share runs on your device. You can set the following preferences: Choose what types of updates you want to use on your maps. Decide if you want to share your updates with others. Show or hide the Report button in the Driving View. To set your preferences, do the following: 1. Tap Map corrections in the Main Menu. 2. Tap Correction preferences. A list of update types is shown. 3. Tick the box next to each update type you want use. 4. Tap Done. 5. Choose how you want to share your map updates with the Map Share community, then tap Done. 6. Choose if you want to see the Report button in the Driving View. 7. Tap Done. Tip: If you later decide you want to remove updates from the map, clear the checkbox next to the types of update you want to remove. If you clear all the checkboxes, your map returns to the original state before the first update.

1. Tap Add missing POI. 2. Tap Restaurant in the list of POI categories. 3. Tap Near you. 4. Select the location of the missing restaurant. You can select the location by entering the address or by selecting the location on the map. Select Near you or Near home to open the map at your current location or at your Home location. 5. Tap Done. 6. Type the name of the restaurant then tap OK. 7. If you know the telephone number of the restaurant you can type it, then tap OK. If you dont know the number, just tap OK without typing a number.
Tap this button to edit an existing POI. You can use this button to make the following changes to a POI:

Edit POI

Delete the POI. Rename the POI. Change the telephone number of the POI. Change the category that a POI belongs to. Move the POI on the map. Tap this button to report other types of update. These updates are not immediately corrected on your map. Your TomTom ONE sends a special update report to TomTom Map Share.

Report other error

You can report missing streets, errors in freeway entrances and exits and missing roundabouts. If the update you want to report is not covered by any of these report types, enter a general description then tap Other.
Traffic Information using RDS-TMC
The Traffic Message Channel (TMC)
You can receive traffic information on your TomTom ONE using the TomTom RDS-TMC Traffic Receiver. The TMC transmits traffic information as a radio signal. Tip: The TomTom RDS-TMC Traffic Receiver is included with some products and available as an accessory for others. Visit tomtom.com for more information. The Traffic Message Channel (TMC) is not a TomTom Service. FM radio stations in several countries broadcast TMC information as part of their programming. TMC is also known as RDS-TMC traffic information. Your TomTom navigation device uses this information to warn you about traffic delays along your route and how you can avoid them. Note: TomTom is not responsible for the availability or quality of traffic information provided by TMC. TMC is not available in all countries or regions. Visit tomtom.com to check if it is available in your country or region.

Setting up TMC

To start using TMC all you need to do is connect the RDS-TMC Traffic Receiver to your TomTom navigation device. Important: When you install your navigation device in your car, dont block the drivers view of the road. 1. Connect the RDS-TMC Traffic Receiver to your navigation device. 2. Connect the Car Charger to the RDS-TMC Traffic Receiver and then plug the Car Charger into your cars cigarette lighter socket. Note: The RDS-TMC receiver does not work if the Car Charger is not connected. 3. Place the transparent suction cup at the tip of the antenna firmly against the upper left hand corner of your car windshield.
4. Then place the remaining suction cups along the edge of the windshield, as shown, keeping the cable straight. 5. Switch on your navigation device. The Traffic bar is shown in the Driving View and your navigation device searches for a radio station that carries RDS-TMC information.

These symbols are shown at the top of the traffic sidebar: Your ONE has the latest RDS-TMC traffic information. Your ONE is waiting to download the latest RDS-TMC traffic information as soon as it is available. Your ONE is searching for a radio station that carries RDS-TMC traffic information.
Using RDS-TMC traffic information
As soon as you start receiving traffic information, the traffic sidebar is shown on the right side of the Driving View. The traffic sidebar warns you about any traffic incidents on your route. In this example, there is a traffic jam on your route 9 kilometers ahead that will cause an expected delay of 38 minutes. To find the quickest route to your destination, do the following: 1. Tap the Traffic sidebar. 2. Tap Minimize traffic delays. Your device looks for the quickest route to your destination. The new route may also include traffic delays, or may even be the same route as before. 3. Tap Done.
Changing traffic preferences
Use the Change Traffic preferences button to choose how traffic information works on your device.
To change your traffic preferences, do the following: 1. Tap the TomTomTraffic button in the Main Menu on your device.
Change Traffic preferences
2. Tap Change Traffic preferences. You can change the following preferences: Automatically minimize delays after every traffic update - if you select this option, your device automatically recalculates when new delays occur on your route. Beep when traffic situation on route changes - if you select this option your device beeps when a new traffic incident occurs on your current route. Ask for traffic updates when preparing a route - this option has no effect in RDS traffic. 3. Select or clear the check box next to each preference you want to change. 4. Tap Done. Your device lists the countries that have radio stations providing RDSTMC traffic information that you can currently receive. Normally you can leave this set to Any country (strongest signal). 5. Tap Done.
Making commuting to work easier
The Home to work or Work to home buttons in the Traffic menu lets you check your route to and from work with one tap of a button. When you use either of these buttons, your device checks the route for possible delays, and if it finds any, provides you with the possibility to avoid them. The first time you use Home to work, you must set your traffic home and work locations, do the following: 1. Tap the TomTomTraffic button in the Main Menu on your device. 2. Tap Show home-work traffic.

Data Source 2008 Tele Atlas N.V. Based upon: Topografische ondergrond Copyright dienst voor het kadaster en de openbare registers, Apeldoorn 2008. Ordnance Survey of Northern Ireland. IGN France.
Swisstopo. BEV, GZ 1368/2008. Geonext/DeAgostini. Norwegian Mapping Authority, Public Roads Administration / Mapsolutions. DAV. This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of Her Majestys Stationery Office. Crown copyright and/or database right 2008. All rights reserved. Licence number 100026920.
Data Source Tele Atlas North America. Inc. All rights reserved. Canadian Data DMTI Spatial. Portions of Canadian map data are reproduced under license from Her Majesty the Queen in Right of Canada with permission from Natural Resource Canada. Point of Interest data by Info USA. Copyright 2008.
Data Source Whereis map data is 2008 Telstra Corporation Limited and its licensors, Whereis is a registered trademark of Telstra Corporation Limited, used under license.
Some images are taken from NASAs Earth Observatory. The purpose of NASAs Earth Observatory is to provide a freely-accessible publication on the Internet where the public can obtain new satellite imagery and scientific information about our home planet. The focus is on Earths climate and environmental change: earthobservatory.nasa.gov/
Text to Speech technology, 2008 Loquendo TTS. All rights reserved. Loquendo is a registered trademark. www.loquendo.com

Addendum

Important Safety Notices and Warnings
Global Positioning System The Global Positioning System (GPS) is a satellite-based system that provides location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United States of America, which is responsible for its availability and accuracy. Any changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of your TomTom device. TomTom does not accept any liability for the availability and accuracy of GPS. Use with Care Use of a TomTom device for navigation still means that you need to drive with due care and attention. Aircraft and Hospitals Use of devices with an antenna is prohibited on most aircraft, in many hospitals and in many other locations. A TomTom device must not be used in these environments.
Taking care of your TomTom device
Do not leave your TomTom device or TomTom accessories on view when you leave your car. They may become an easy target for thieves. You can set a password for your device which must be entered every time you start your device. We recommend that you use the safety preferences on your TomTom device, where available. The safety preferences are available in the Preferences menu. Take care of your TomTom device and clean it correctly. Use a soft cloth to wipe the screen of your device; do not use any liquid cleaners. If your device gets wet, dry it with a soft cloth. Do not open the casing of your device under any circumstances. Doing so may be dangerous and will invalidate your warranty. Do not use the memory card (SD card) with any device other than a TomTom device. Other devices may damage the memory card. Do not expose your device to high or low temperatures, which can cause permanent damage. For example, dont leave it in the car on hot summer days or during cold winter nights.

Battery

This product uses a Lithium-Polymer battery. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 60 C (140 F). Failure to follow these guidelines may cause the Lithium-Polymer battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will not occur at low (below 0 C/32 F) or high (over 45 C/113 F) temperatures. Temperatures: Standard operation: -10 C (14 F) to +55 C (131 F); short period storage: -20 C (-4 F) to + 60 C (140 F); long period storage: -20 C (-4 F) to +25 C (77 F). THE LITHIUM-POLYMER BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF PROPERLY. USE YOUR TomTom ONLY WITH THE SUPPLIED DC POWER CABLE (CAR CHARGER/BATTERY CABLE) AND AC ADAPTER (HOME CHARGER) FOR BATTERY CHARGING. To recycle your TomTom unit please see your local approved TomTom service center.
SPECIAL NOTE REGARDING DRIVING IN CALIFORNIA AND MINNESOTA
California Vehicle Code Section 26708 (a) (1) provides that No persons shall drive any motor vehicle with an object or material placed, displayed, installed, affixed or applied upon the windshield or side or rear windows. Drivers in California should not use a suction mount on their windshield, side or rear windows. Note: this section of the California Vehicle Code applies to anyone driving in California, not just California residents. Minnesota State Legislature Statutes Section 169.71, subdivision 1, section 2 provides that A person shall not drive or operate with any objects suspended between the driver and the windshield other than sun visors and rearview mirrors and electronic toll collection devices. Note: this Minnesota Stature applies to anyone driving in Minnesota, not just Minnesota residents. TomTom Inc. bears no responsibility for any fines, penalties or damage that may be incurred by disregarding this notice. While driving in any state with windshield mounting restrictions, TomTom recommends the use of the supplied Adhesive Mounting Disk or its Alternative Mounting Kit, which includes multiple options for mounting TomTom devices on the dashboard and using the air vents. See www.tomtom.com for more information about this mounting option.

doc1

TomTom

Whats in the box

a Your TomTom

A Charging light B On/off button C Touchscreen D Connector E Speaker F USB connector G Reset button H Memory card slot b Memory card (SD card) d Connector cover c USB cable

e Sleeve

f Documentation pack

g Product code card

Before you start.

Everyone loves TomTom

So never leave your TomTom in your car when youre not using it - its an easy target for thieves. Always remove your TomTom from the car stereo and take it with. If you are using your TomTom in another car, dont leave it or any other TomTom products on display. Always store your TomTom in the bag to protect the screen.

Backup your TomTom

Its always a good idea to make a backup of the contents of your TomTom. You can make a backup using TomTom HOME. For more information about TomTom HOME, see Using TomTom HOME on page 55.

Safety lock

When you first switch on your TomTom, the safety lock is enabled. You can switch off the safety lock in the by tapping Safety preferences in the Preferences menu. We recommend using the safety lock at all times. When the safety lock is enabled, only a few buttons and features are available while you are driving. When you are stationary, all the buttons and features are available.

Safety preferences

For more information, see Safety preferences on page 39.

Keep to the speed limit

To help you keep to the speed limit, your TomTom can tell you the speed limit for the road you are on. To see the speed limit, select to show your speed in the Status bar preferences in the Preferences menu. The speed limit is shown next to your current speed. Note: The speed limit information is included with the map and is not available for all roads.

Troubleshooting

Always make sure that you are using the latest version of the TomTom application on your TomTom. You can update the application using TomTom
HOME. For more information about TomTom HOME, see Using TomTom HOME on page 55. If you have problems turning on your TomTom, try resetting your TomTom. To reset your TomTom, use a straightened paper clip, or something similar, to push the reset button. The reset button is next to the memory card slot, on the bottom of your TomTom. Then turn your TomTom on.

Secure your TomTom

Set a password for your TomTom so that only you can use it. Every time you start your TomTom you will have to enter your password. To set the password, you have to run your TomTom using TomTom HOME. You can then use TomTom HOME to set the password. To set a password on your device, do the following: 1. Connect your TomTom to your computer and switch it on. 2. Start TomTom HOME if it does not start automatically. If you do not have TomTom HOME installed, insert the CD that came with your TomTom to install it. Alternatively, you can download TomTom HOME from www.tomtom.com. Make sure you always have the latest version of TomTom HOME. For more information about TomTom HOME, see Using TomTom HOME on page 55. 3. In the Planning section, select your TomTom. A picture of your TomTom is shown in the main section of TomTom HOME. 4. Click the On/Off button on the picture of your TomTom to switch it on in TomTom HOME. Your TomTom starts in TomTom HOME. You can now set the password on your TomTom using TomTom HOME. Don't unplug your TomTom, just use it as you normally would by clicking the buttons shown on your computer. 5. From the Main Menu in your device, click Change preferences. 6. Click Set owner. You may have to click the arrow until you reach the page where Set owner is shown. If you cannot find the button Set owner, make sure that all buttons are shown in your TomTom. Tap the button Show ALL menu options. All buttons will now be shown.

Set owner

You can now set the password for your TomTom. You can also set your name and address, which will then be shown when your TomTom starts up.

Take care of your TomTom

It is important to take care of your TomTom and to clean it correctly. Use a soft cloth to wipe the screen of your TomTom; do not use any liquid cleaners. If your TomTom gets wet, dry it with a soft cloth. Do not open the casing of your TomTom under any circumstances. Doing so may be dangerous and will invalidate your warranty. Do not use the memory card (SD card) with any device other than a TomTom device. Other devices may damage the memory card. Do not expose your TomTom to high or low temperatures, which can cause permanent damage. For example, dont leave it in the car on hot summer days or during cold winter nights.

Getting started

Switching on
Follow the instructions at the start of this manual to dock your TomTom in your car stereo. Your TomTom can also be used without docking it in your car stereo. A mount is available as an accessory so that you can use your TomTom in other cars. The first time you switch on your TomTom, it may take up to 20 seconds to start. To switch off your TomTom, press and hold the On/Off button for 2 seconds.

Setting up

You have to answer a few questions to set up your TomTom. Answer the questions by tapping the screen. You will use the touchscreen for everything you do with your TomTom. You can change these settings at any time using the Preferences menu. For information about the Preferences menu, see Preferences on page 38. Once you have answered the questions, your TomTom will display the Driving View. The Driving View is shown in black and white until your TomTom locates your current position. For more information about the Driving View, see Driving View on page 14.
Locating your current position
Your TomTom must be outdoors to locate your current position. The first time you start your TomTom, it can take up to 5 minutes to find your current position. If it takes longer than 5 minutes, make sure that you are in an open place without tall buildings or trees around you. In the future, your position will be found much faster, normally within a few seconds. Once your TomTom has located your current position, the Driving View is shown in full colour and shows your position on the map.

Night view

When you switch on the headlights in your car, your TomTom will switch to night view. In night view, the brightness of the screen on your TomTom is dimmed so its easier to see when its dark outside. Night view on your TomTom is linked to the dimmer setting on your car stereo. See the manual for your car stereo for information about the dimmer setting.
To manually control the brightness of the screen, select not to link the night view to the dimmer setting in the Docking preferences in the Preferences menu. To switch to night view manually, tap Use night colours in the Preferences menu.

Navigate to. Tap this button to start planning a route. Find alternative. Tap this button if you want to avoid part of your route, travel via a specific location or calculate an alternative route. TomTom Traffic Tap this button to enable or disable traffic information. Mobile phone This button opens the mobile phone menu. You can, for example, make calls, and write or read messages. For more information, see Hands-free calling on page 35. Change preferences This button opens the Preferences menu. You can change many things about the way TomTom looks and behaves. For more information, see Preferences on page 38. Hidden buttons and features When you first start using your TomTom, not all the buttons will be shown in the menu. Many buttons and some more advanced features are hidden because you will not need these features very often. To show all buttons and features, tap Show ALL menu options in the Preferences menu.
To hide these buttons again, tap Show fewer menu options in the Preferences menu.
If your car is moving and the safety lock is enabled, you are not able to access all buttons and features of your TomTom. The Main Menu shows only a few buttons that may be needed while you are driving. As soon as your car stops moving, you will be able to access all of the buttons and features again. To disable the safety lock, tap Safety preferences in the Preferences menu.

Using the car stereo

Switching to audio
To use your TomTom to control your car stereo, press the Screen button. You can switch back to the navigation functions at any time by pressing the Screen button again. When you switch to controlling your car stereo, it switches to the radio unless you are already using a different audio source. To switch to other audio input sources, press the Source button. The volume of all sound is set by the volume control on the car stereo. You can adjust the volume of spoken instructions separately by changing the volume on your TomTom.

Using the radio

Your TomTom shows the radio station that you are tuned to and the frequency.

Find alternative.

Then tap one of the options below.
Tap this button to calculate an alternative to the route already planned. Your TomTom will look for another route from your current location to your destination. If you decide you would prefer to use the original route after all, tap Recalculate original. Why would I need to do this? Apart from the roads near your position and near your destination, the new route will use totally different roads to reach your destination. This is an easy way of calculating a totally different route. Tap this button if you can see a roadblock or a line of traffic ahead. You then have to choose how much of the route ahead you want to avoid.

Avoid roadblock

Calculate alternative
Choose from the different options: 100m, 500m, 2000m, 5000m. Your TomTom will recalculate your route avoiding the section of the route for the distance you selected. Dont forget that once a new route is calculated, you may have to turn off the road you are on very soon. If the roadblock suddenly clears, tap Recalculate original to return to your original route.
Tap this button to change your route so that it passes a particular location, perhaps to pick someone up on the way.

Travel via.

You choose the location you want to pass in the same way as you choose a destination. So you can select from all the same options: for example, Address, Favourite, Point of Interest and Point on map. Your TomTom will calculate a new route to your destination that passes the location you chose. Using this button, you can only travel via one location. If you want to pass more than one, use an Itinerary. For more information, see Itinerary planning on page 32. Tap this button to return to the original route without any deviations for roadblocks or to travel via particular locations.

Recalculate original

Tap this button to avoid a part of the route. Use this button if you see that your route includes a road or junction you dont like, or which is wellknown for traffic problems.

Avoid part of route

You then choose the road you want to avoid from a list of the roads on your route. Tap this button to recalculate your route so that it avoids traffic problems as much as possible. Your TomTom will check if there are any traffic problems on your route and work out the best route to avoid the problems.

Minimise traffic delays

For more information about using TomTom Traffic, see Traffic information on page 50.

Using the map

Every time you use your TomTom to plan a route, you are using the map. However, you can use the map in many other ways. To open the map, tap Browse map in the Main Menu.
Place your finger on the screen and drag it across the screen to move the map. A The scale bar Move the handle on the scale bar to zoom in and out on the cursor position. B Your current position C GPS button. Tap this button to centre the map on your current position. D The Options button Use the Options button to set what is shown on the map. E The cursor F The Find button Tap this button to find specific addresses and Points of Interest on the map. G The Cursor button Tap this button to navigate to the cursor position, make a Favourite of the cursor position, or find a Point of Interest near the cursor position. See below for more information. H The zoom bar. Change the scale of the map by moving the zoom bar up or down.

Using the Cursor button

You can use the map to find addresses and Points of Interest (POIs), for example, restaurants, train stations and petrol stations. With the Cursor button, you can use what you have found. Tap the cursor button to open the page of buttons shown below:
Tap this button to navigate to the cursor position. Your TomTom will calculate the route there.

Navigate there

Tap this button to find a POI near the cursor position. For example, if you have found a restaurant to go to, you can search for a parking garage nearby.

Find POI nearby

Tap this button to call the cursor position. This button is only available if your TomTom has the phone number for the cursor postion.
The phone numbers of many POIs are stored in your TomTom. If you entered phone numbers for POIs you have created, you can also call them. For more information about hands-free calling, see Hands-free calling on page 35. Tap this button to create a Favourite at the cursor position. For more information about Favourites, see Favourites on page 23.

Add as Favourite

Tap this button to create a POI at the cursor position. For more information about POIs, see Points of Interest on page 27.

Add as POI

Tap this button to travel via the cursor position. This button is only available if you are currently navigating to a destination.

Favourites

What are Favourites?
Favourites are places that you go often. You can create Favourites so that you dont have to enter the address every time you want to navigate there. They dont have to be places you like, just useful addresses.
How can I create a Favourite?
From the Main Menu, tap Add Favourite. Note: The button Add Favourite may not be shown on the first page of the Main Menu. Tap the arrow to open other pages in the Main Menu. You can then select the location of the Favourite from the list below. Give your Favourite a name that is easy to remember. Your TomTom will always suggest a name, usually the address of the Favourite. To enter the name, just start typing. You dont have to delete the suggested name. You can set your Home location as a Favourite.
You cannot create a Favourite from another Favourite. This option will always be unavailable in this menu.
To rename a Favourite, tap Manage Favourites in the Preferences menu. For more information, see Manage Favourites on page 40. You can specify an address to be a Favourite. When you enter an address, you can choose from four options. The same options as appear in the Navigate to. menu:

Address

City centre Street and house number Postcode (fully supported only in UK and the Netherlands) Crossing or intersection
Select a Favourite location from a list of places you have recently used as destinations.
You can add a Point of Interest (POI) as a Favourite. Does it make sense to do this?
If you visit a POI you particularly like, for example a restaurant, you can add it as a Favourite. To add a POI as a Favourite, tap this button, then do the following: 1. Narrow your choice of POIs by selecting the area where the POI is.
You can select one of these options: POI near you - to search from a list of POIs near your current position. POI in city - to choose a POI in a particular town or city. You have to specify a town or city. POI near Home - to search from a list of POIs near your Home location. If you are currently navigating to a destination, you can also select from a list of POIs which are on your route or near your destination. Choose one of these options: POI along route POI near destination 2. Select the category of POI. Tap the category of POI if it is shown or tap the arrow to choose from the complete list. Tap Any POI category to search for a POI by name. For more information about POIs, see Points of Interest on page 27. Tap this button to add your current postion as a Favourite. For example, if you see stop somewhere you like, while you are there you can tap this button to create the Favourite.

Mark visited

Mark as waypoint

Mark as destination

It will navigate you to the next item in the Itinerary. This button is only shown if you are still due to visit this item.
Tap this button to repeat part of your Itinerary. Your TomTom will navigate you to this item followed by the rest of the items in the Itinerary.

Mark to visit

This button is only shown if you have already visited this item. Tap this button to move the item up the Itinerary. This button is unavailable if the item is at the top of the Itinerary.

Move item up

Tap this button to move the item down the Itinerary. This button is unavailable if the item is at the bottom of the Itinerary.

Move item down

Tap this button to see the location of the item on the map. For more information about the map browser, see Using the map on page 21. Tap this button to delete the item from the Itinerary.

Show on map

Delete item

Start using an Itinerary

Tap Options, then tap Start navigation.
Once you have created an Itinerary, its a good idea to save it. To save an Itinerary, tap Save Itinerary. To load a saved Itinerary, tap Load Itinerary. To create a new Itinerary, tap New Itinerary and to delete one, tap Delete Itinerary.

Hands-free calling

If you have a mobile phone with Bluetooth, you can use your TomTom to make phone calls and send and receive messages while you are driving. Your TomTom must be docked in your car stereo to make hands-free calls. Note: Not all phones are supported or compatible with all features. For more information, visit www.tomtom.com/phones

Connecting to your phone

First you must establish a connection between your mobile phone and your TomTom. You only have to do this once. Your TomTom remembers your phone. Tap Mobile phone in the Main Menu, then follow the instructions on the screen.

Setting up TomTom PLUS

After you have established a connection with your phone, you can set up a wireless data connection for TomTom PLUS services. For information about TomTom PLUS, see TomTom PLUS on page 53. Tips Make sure that you switch on Bluetooth on your phone. Make sure that your phone is set to discoverable or visible to all. You may have to enter the password 0000 on your phone in order to connect to your TomTom. Make your TomTom a trusted device on your phone. Otherwise you have to enter 0000 every time. See your phones user guide for information about Bluetooth settings.

Your phonebook

Preferences

You can change many things about the way your TomTom looks and behaves. Tap Change preferences in the Main Menu.
Hidden buttons and features
When you first start using your TomTom, not all the buttons will be shown in the menu. Many buttons and some more advanced features are hidden because you will not need these features very often. To see all of the buttons and features, tap this button in the Preferences menu.

Show ALL menu options

After you have finished, we recommend that you hide the advanced buttons and features again by tapping this button. For everyday use, you wont need all the buttons and features.

Show fewer menu options

Use night colours / Use day colours
Tap this button to reduce the brightness the of the screen and use darker colours on the map.

Use Night colours

By default, the colours that are used for the screen is linked to the dimmer setting on your car stereo. When the display on your car stereo is dimmed, night colours are used. To manually control the brightness of the screen, select not to link the night view to the dimmer setting in the Docking preferences in the Preferences menu. When should I use this? When its dark outside, its easier to see the screen of your TomTom if it isnt so bright. To change back to a brighter screen and brighter colours on the map, tap the button Use day colours.

Use day colours

Turn off 3D display / Turn on 3D display
Tap this button to view the map from above while you are navigating.

Turn off 3D display

To switch back to seeing the map from your perspective as you drive, tap Turn on 3D display.

Turn on 3D display

When should I use this? In some situations, it is easier to see the map from above. Perhaps if the roads are very complicated or if you are walking and using your TomTom to navigate.
Tap this button to enable or disable the safety lock.
Safety lock When you enable the safety lock, you are not able to access all buttons and features of your TomTom while driving. The Main Menu shows only a few buttons that may be needed while you are driving. As soon as your car stops moving, you will be able to access all of the buttons and features again.

Note: The best route may be the same as the route originally planned.

TomTom PLUS

TomTom PLUS is a collection of services that keep you informed and entertained while youre on the road. You can subscribe to a range of extras and download them either directly to your TomTom, or to your computer from where you can transfer them to your TomTom. Tips New services are being added regularly. Use TomTom HOME or visit www.tomtom.com/plus to find out whats available. To download TomTom PLUS services to your TomTom, you need a mobile phone with Bluetooth and a wireless data connection (GPRS, EDGE, UMTS or CDMA). Your mobile operator may charge you for using a wireless data connection. Dont forget that you can download many TomTom PLUS services to your computer without needing to set up a wireless data connection. Not all services are available in all countries. For more information, visit www.tomtom.com/plus Traffic Get the fastest and most reliable updates from local sources. Safety cameras Be smart and stick to the speed limit. Maps Download detailed maps of many cities throughout the world or even whole countries. Voices Get instructions from John Cleese and many other funny voices. Buddies Instant messaging and navigation meet on your TomTom. Weather Get weather forecasts for the next 5 days or check the current weather at your destination.
Points of Interest Find the places you need quickly with the locations of thousands of Points of Interest (POIs).

Using TomTom HOME

Using TomTom HOME, you can, for example, do the following: Make and restore backups of your TomTom. Manage the maps, voices, POIs and other extras on your TomTom. Read the full version of the user manual. Plan journeys in advance. Buy TomTom PLUS services and manage your subscriptions.

Installing TomTom HOME

To install TomTom HOME, put the CD which came with your TomTom into your computer. If the installation does not start, browse to the CD on your computer and double-click the file Install TomTom HOME. Connect your TomTom to your computer and switch it on.

Making a backup

One of the most important things you can do with TomTom HOME is make a backup of your TomTom. 1. Connect your TomTom to your computer using the USB cable and switch your TomTom on. TomTom HOME starts. 2. Click Backup under Contents. 3. Click Backup. TomTom HOME makes a backup of your TomTom on your computer.

Restoring a backup

If you ever have a problem with your TomTom, you can restore the backup. Follow steps 1 and 2 above, then select the latest backup and click Restore. The latest backup will be restored to your TomTom. For more information, see the Help included with TomTom HOME.

How does navigation work?
Global Positioning System (GPS)
In order to navigate you to your destination, your TomTom must know where you are now. To find your current position, your TomTom uses the Global Positioning System (GPS). GPS is available for free and without subscription. The GPS uses satellites to transmit signals to GPS receivers. Your TomTom uses a GPS receiver built into your car when inserted in your car stereo, and it has a built-in GPS receiver that it uses when it is not inserted in the car stereo. Using the GPS signal, your TomTom can work out where you are and how fast you are going. GPS signals work in all weather, anywhere in the world. Note: Your TomTom does not transmit your position, so others cannot use it to track you while you are driving. You can however send your position to TomTom Buddies. For more information, visit www.tomtom.com/plus
Once your TomTom knows where you are and you have told it where you want to go, it uses the digital map on the memory card to work out the best route to your destination.

Addendum

Important Safety Notices and Warnings
Global Positioning System The Global Positioning System (GPS) is a satellite-based system that provides location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United States of America which is responsible for its availability and accuracy. Any changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of your TomTom. TomTom does not accept any liability for the availability and accuracy of GPS. Use with Care Use of TomTom for navigation still means that you need to drive with due care and attention. Aircraft and Hospitals Use of devices with an antenna is prohibited on most aircraft, in many hospitals and in many other locations. TomTom must not be used in these environments. Battery This product uses a Lithium-Ion battery. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 60 C (140 F). Failure to follow these guidelines may cause the Lithium-Ion battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will not occur at low (below 0 C/32 F) or high (over 45 C/113 F) temperatures. Temperatures: Standard operation: -10 C (14 F) to +55 C (131 F); short period storage: -20 C (-4 F) to + 60 C (140 F); long period storage: -20 C (-4 F) to +25 C (77 F). THE LITHIUM-ION BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF PROPERLY. USE YOUR TOMTOM ONLY WITH THE SUPPLIED DC POWER LEAD (CAR CHARGER/ BATTERY CABLE) AND AC ADAPTER (HOME CHARGER) FOR BATTERY CHARGING. To recycle your TomTom unit please see your local approved TomTom service center.

FCC Information for the User
This product contains a transmitter which must not be co-located or simultaneously operated in conjunction with any other transmitter. Exposure to Radio Frequency Radiation To comply with RF exposure requirements please maintain a separation distance of at least 20 cm / 7 inches from any part of the product. Radio and Television Interference This equipment radiates radio frequency energy and if not used properly - that is, in strict accordance with the instructions in this manual - may cause interference to radio communications and television reception. It has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation distance between the equipment and the receiver. If you are using the equipment with a mains adapter, plug it into an outlet which is on a different circuit from that to which the receiver is connected. Consult an experienced radio/TV technician for help. Important This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cable and connectors to reduce the possibility of causing radio and television interference. Shielded cables, suitable for the product range, can be obtained from an authorised dealer. If the user modifies the equipment or its peripherals in any way, and these modifications are not approved by TomTom, the FCC may withdraw the users right to operate the equipment. For customers in the USA, the following booklet prepared by the Federal Communications Commission may be of help: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the US Government Printing Office, Washington, DC 20402. Stock No 004-00000345-4.
FCC Declaration of Conformity
Tested to Comply with FCC Standards for Home or Office Use TomTom has been tested to and complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Responsible party in North America TomTom, Inc., 150 Baker Avenue, Concord, MA 01742 Tel: 866 48-6866 option 1 (1-866-4-TOMTOM) Emissions information for Canada

Vastavalt EL direktiivile 2002/96/E, mis ksitleb elektri- ja elektroonikaseadmete jtmeid (WEEE), ei vi antud toodet visata majapidamisjtmete hulka. Palun tagastage antud toode taaskasutamise eesmrgil mgipunkti vi kohaliku piirkonna jtmekogumise punkti. Az elektromos s elektronikus berendezsek hulladkairl szl 2002/96/EK (WEEE) irnyelvnek megfelelen ezt az elektromos berendezst tilos szortrozatlan, kzssgi hulladkgyjtbe dobni. A termket hasznlata befejeztvel vigye vissza az eladsi ponthoz vagy a helyi kzigazgatsi jrahasznost gyjthelyre. Pagal ES Direktyv 2002/96/EB dl elektros ir elektronins rangos atliek (WEEE), io elektros gaminio negalima imesti su buitinmis atliekomis. gamin reikia grinti t viet, kur jis buvo pirktas, arba miesto atliek perdirbimo punkt. Saska ar ES Direktvu 2002/96/EC par elektrisko un elektronisko iekrtu atkritumiem (EEIA), o elektrisko iekrtu ir aizliegts nodot kop ar citiem neirotiem sadzves atkritumiem. Ldzu nododiet o iekrtu atpaka ts tirdzniecbas viet vai Jsu tuvkaj sabiedriskaj iekrtu savkanas punkt to prstrdei. Zgodnie z Dyrektyw Nr 2002/96/WE w sprawie zuytego sprztu elektrycznego i elektronicznego (WEEE), niniejszego produktu elektrycznego nie wolno usuwa jako nie posortowanego odpadu komunalnego. Prosimy o usuniecie niniejszego produktu poprzez jego zwrot do punktu zakupu lub oddanie do miejscowego komunalnego punktu zbirki odpadw przeznaczonych do recyklingu. V slade so smernicou 2002/96/ES o odpade z elekrickch a elektronickch zariaden (OEEZ) sa toto elektrick zariadenie nesmie odstranovat ako netrieden komunlny odpad. Vrobok odstrnte jeho vrtenm v mieste nkupu alebo odovzdanm v miestnom zbernom zariaden na recyklovanie. Atk elektrikli ve elektronik cihazlar konulu 2002/96/AT sayl AB Direktifine (WEEE) uygun olarak bu cihaz, ayrlmam belediye atklaryla birlikte atlmamaldr. Ltfen bu rn, sat noktasna iade ederek veya belediyenizin geri dnm iin toplama merkezine gtrerek atn.
N14644 This product displays the Ctick to show it complies with all relevant Australian and New Zealand regulations.

This Document

Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. The information in this document is subject to change without notice. TomTom shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the performance or use of this material. This document contains information protected by copyright. No part of this document may be photocopied or reproduced in any form without prior written consent from TomTom International B.V. Part numbers TomTom device: 4P00.001

Copyright notices

2007 TomTom International B.V., The Netherlands. Patents Pending. All rights reserved. TomTom and the TomTom logo are registered trademarks of TomTom International B.V., The Netherlands. All other trademarks are the property of their respective owners. Our end user license agreement and a limited warranty apply to this product; they are included in this package. You can also review both at www.tomtom.com/legal
Data Source 2007 Tele Atlas N.V. Based upon: Topografische ondergrond Copyright dienst voor het kadaster en de openbare registers, Apeldoorn 2007. Ordnance Survey of Northern Ireland. IGN France. Swisstopo. BEV, GZ 1368/2007. Geonext/DeAgostini. Norwegian Mapping Authority, Public Roads Administration / Mapsolutions. DAV. This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of Her Majestys Stationery Office. Crown copyright and/or database right 2007. All rights reserved. Licence number 100026920.
Apple and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
SoundClear acoustic echo cancellation software Acoustic Technologies Inc.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit mp3licensing.com
Some images are taken from NASAs Earth Observatory. The purpose of NASAs Earth Observatory is to provide a freely-accessible publication on the Internet where the public can obtain new satellite imagery and scientific information about our home planet. The focus is on Earths climate and environmental change: earthobservatory.nasa.gov/

 

Tags

AW12ECB8 Timer 58-14 PM-3500C Turbo KR-33 Dvdr3480-31 Yorkville TX8P PT-D3500 Electronics M6 Flash Lite ANT24-0700 AF-S85NX Optio 750Z Sagem D32V Battery SA-PM53 XDV-D500 Reset UB502 Samsung I688 XR-C430RDS DRM-24HX Aladin AIR VX5200 DTH8543 Amplifier MP 4000 Menzoberranzan PR-SC5508 Master VGN-SZ340P Ryobi 750R Accessories E3300 WFT 2830 Manual VGN-AR71J Eco TE Cqrx300N Expert SAP-ZK22X Analysis 2010 LMS-480M DTT900 Software VGN-TZ31wn B 5 0 Infiniti G20 D1100 LI860-5 270 CDI Gps White E5615 Power M8 T2351 Series Systemdiagnostics DR198H Imt702 207 CC LAV86730-W DB-90 LAV42030 STR-DE997 LN32T72BDA TH-65PF12UK Makita 4324 SPK 48 Recettes RDR-HXD895 P-85S EX-S770 Models L1716S EL-2135 Ducati 749R M 300 Xxx 4 Review KX-393 ES 2 FS1255S Mamiya ZE Color Kxtg6411E DVP-S535D WV-CS600 STR-V333ES Notebook SA-AK640 Contour York YS Mount DJM-800 Samsung R843 SB-RX300D Intermatic DT17 DVD-S97 Update BCD2000 AM-906 Protocol VPC-CG6 KDC-7080RV DNX194H FS-1562 TX-28PL1F

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101