WMF1000pro

User Manual EN
The first premium machines that bring the highest quality coffee from the worlds finest addresses right to your home.
WMF has been involved in the preparation of coffee since 1880. The first WMF large coffee machine dates back to 1927. Just 30 years later, in 1955, the great victory campaign of WMFcoffee machines began, when WMF brought the Italian espresso to German restaurants with the first fully automatic espresso machine. This was followed by a multitude of groundbreaking innovations, which brought WMF world-wide success. WMF was then the first manufacturer to follow the fully automatic espresso with the latte macchiato at the touch of a button for the restaurant trade. The innovative WMF force and typical quality combined with many years of experience are the basis of the reputation that WMF rofessional machines enjoy today. p Today you will find WMF coffee machines in the worlds finest restaurants. And the WMF 1000 pro brings the highest quality coffee from the worlds finest restaurants right to your home.
The first professional coffee machine for the home: The WMF1000 Blitz from 1954
Introduction and General Information Parts of the machine
Bean hopper Plus button / Aroma button Minus button / Care button / Aroma button P button / Confirm / Preheat cup button Off/C button / Timer

Manual insert

Heated cup storage

Display

Hot water button

Hot water spout

Milk hose Milk button / Milk foam button

Beverage buttons

Adjustable height AllinOne professional spout with integral milk foamer Coffee grounds container
Preheat cup Removable drip tray with drip tray grid Water tank Refrigerated milk tank (optional)
The WMF1000pro is a professional, fully automatic coffee machine. The coffee machine is intended for private use and has been developed based on our experience and knowledge of high-performance coffee machines for restaurants and hotels. The WMF1000pro offers you a unique range of beverages and access to well-established technology. You will be impressed by the machines technical design, long service life, and especially by the quality of the coffee it produces. The WMF1000pro prepares espresso, ristretto, caf crme, latte, espresso macchiato and can make two glasses of latte macchiato or two cups of cappuccino at once. It can also provide hot milk and hot water to be used for tea, for example. In addition to the successful features offered by the WMF1000pro, including a selection of 12 specialties at the touch of a button, the patented WMF Connect and Clean milk system rinse and the WMF professional technology, the WMF 1000 pro includes additional unique innovations, all in the pursuit of just one goal: to produce yet again a decisive advance in coffee quality. The new WMF All-In-One professional spout The innovative WMF Steam-Jet cup preheating system The new WMF Perfect Extraction System WMFs innovations raise the bar. In the restaurant business - and now at home.
Congratulations on choosing your WMF1000pro.
Table of Contents Introduction and General Information
Parts of the machine Before you begin User manual signs and symbols

Start-up

Unpacking and setting up Test the water hardness Prepare the water tank Insert the WMF water filter Assemble the milk hose Fill the water tank Connect the milk hose to the milk Fill the coffee bean hopper Start-up program Basic settings

Operation

Prepare coffee beverages Beverage button overview Example: Prepare two glasses of latte macchiato Set coffee strength for the next beverage Coffee preparation using the manual insert Preparing milk and milk foam Dispensing hot water General beverage preparation Cancel beverage preparation WMF All-In-One professional spout Adjusting the height WMF Steam-Jet cup preheating Control buttons Operating and lighting concept Switching the coffee machine on and off Switching on Switching off Switching the coffee machine on and off in timer operation Setting the automatic switch-on time Display timer operation Manual switch-on for timer operation Manual switch-on for timer operation

>> Unpack coffee machine and set it up on a stable, horizontal support
Always follow the safety instructions in the Safety chapter, starting on page 57.

Cable compartment

>> Check the coffee machine for possible transport damages >> Plug the connector into a grounded outlet >> Insert drip tray and drip tray grid

Test the water hardness

>> Briefly dip carbonate hardness test strip into water (approx. 1 second) >> One minute later, read the degree of hardness on the colour scale of the test strip package
The water hardness is set during start-up.

Prepare the water tank

>> Remove the water tank from the coffee machine >> Remove all accessories from the water tank >> Rinse the water tank thoroughly with tap water
Do not put the water tank back into the machine yet. The milk hose must be assembled first.
Drip tray and drip tray grid
Insert the WMF water filter
The WMF water filter ensures the best coffee quality and protects the coffee machine from calcium deposits.
With water hardness 0-4, do not use a water filter.

Water tank

>> Remove the built-in filter from the front of the water tank [1] >> Place the cartridge adapter on the water spout supports from above (lock pulled) and fix it by
pressing the lock down [2]
>> Unpack the water filter cartridge and place it on the cartridge adapter [3]
The sieve and water filter sit very securely.

Assemble the milk hose

The milk hose is already mounted on the AllinOne professional spout. For refrigerated milk, use the white milk nozzle (assembled on delivery) For non-refrigerated milk, use the grey milk nozzle from the accessories box
>> Move the AllinOne spout to the lowest position [4] >> Insert the milk hose into the guide [5] [6]
The milk hose must be in the lowest position without tension and must not sit in front of the grounds container. 6

Fill the water tank

>> Fill the water tank with cold tap water (max. 2.8 litres) >> Slowly slide the water tank back into the machine
Fill the water tank only with fresh, cold water. Never use hot water, mineral water, milk or other liquids.
Connect the milk hose to the milk
>> Place the refrigerated milk directly to the right of the machine
Place the milk hose with the milk nozzle on it into the milk container. The hose end with the milk nozzle should reach the bottom of the milk container.

Milk is a very sensitive food. When handling milk, always ensure cleanliness. Only open packs with clean hands and utensils. Take care that no bacteria can be introduced into the milk.
Fill the coffee bean hopper
>> Open the cover towards the back >> Pour in the coffee beans (max. 320g) >> Close the cover
Once roasted coffee beans have been unpacked, they lose their aromatic components within days. Therefore only pour as many beans into the coffee bean hopper as you expect to use in the next few days; frequent topping up is better. Ensure that no foreign bodies land in the coffee bean hopper. Such foreign bodies can damage the grinders of the coffee mill. This damage is excluded from the warranty.
Each coffee machine is thoroughly tested before shipment. Therefore, coffee grounds residue may remain in the grinder. Your coffee machine is not used.
Do not reach into the bean opening of the mill.
>> Press the Off/C button The start-up program begins.
language: english OK: P change: -/+
>> Press the button to set the desired language. + >> Confirm with the P button.
initial setup of your WMF 1000 The machine is switched on, the start-up program leads you through the basic settings.
The set values can be changed in the Basic Settings program after start-up.

Basic settings

>> Press the and buttons to set the desired values - + >> Press the P button to confirm the values and inputs
After confirmation, the program jumps to the next point of the settings. When exiting the program, the new values are saved. Time time hh:mm:ss OK: P change: -/+

Cup preheating

See Settings chapter
>> Set the current time here.
hh= hour (two places) mm= minutes (two places) ss= seconds (two places) Date date dd:mm:yyyy OK: P change: -/+
Select/confirm Care button
Page backwards Reduce value Page forwards Increase value
The new values are saved when you exit the program.
>> Set the current date here.
dd= day (two places) mm= month (two places) yyyy= year (four places)
Start-up program Water hardness water hardn.: 13-16 OK: P change: -/+

>> Set the result of the carbonate hardness test here
Water filter water filter: No OK: P change: -/+
Carbonate hardness test See included accessories
>> Enter here whether you are using a tank filter (recommended with water hardness
5 dKH and higher) If water filter is set, then the filter should be rinsed now. place 3L container under h.w. spout
Rinse filter: Follow the display messages See Water filter insertion in Start-up chapter See Change filter in Care
>> Set a container with approx. 3 litres capacity under the hot water spout
When rinsing the filter, you will hear unusual noises. This is normal. The noises will end during the filter rinse. The machine now heats up. heating up.
After the machine is heated up, there is a coffee system rinse. This warms up all the pipes.
>> Place a container for the rinse water (approx. 120 ml)under the AllinOne professional spout
The coffee system rinse lasts approx. 40 seconds; after this, the machine is ready to operate. your selection pls 08:15 17.10.2007
Start-up program Start-up complete You can use the WMF1000pro to make coffee just how you like it. There are many settings available for this: Set cup size Beverage setting Grinding degree setting Basic settings
Tips and Tricks, see page 46
For perfection in your preparation of coffee we have compiled a chapter of Tips and Tricks. Switching on and off When switching the machine on and off, the machine automatically starts a Coffee system rinse. This requires sufficient water in the water tank at all times Empty the drip tray regularly, since the rinse water (approx. 120ml) is emptied into the drip tray by the AllinOne professional spout. You can place a container under the AllinOne professional spout to catch the rinse water. About the timer: Switching on and off Attention! The coffee machine automatically switches itself off at a pre-set time. In this circumstance also, the machine performs a coffee system rinse directly before switching off. Empty the drip tray regularly, since the rinse water (approx.120 ml) is emptied into the drip tray by the AllinOne professional spout. You can place a container under the AllinOne professional spout to catch the rinse water.

13 Setting the automatic switch-off time after last beverage dispensing, see Basic settings

Operation

This chapter explains all you need to know about simple preparation of coffee using the WMF 1000 pro. Preparation of coffee beverages Preparing milk and milk foam Dispensing hot water Allinone professional spout WMF SteamJet cup preheating Control buttons Operating and lighting concept Switching on and off the coffee machine / Timer operation Caution. Burning and scalding hazard. The AllinOne spout and the hot water spout can get very hot. The beverages dispensed and the escaping steam are very hot. Never touch the spouts during or directly after dispensing beverages. Never touch the beverages, rinse and cleaning water or steam during or directly after dispensing beverages.
Always observe the safety instructions to operate the WMF 1000 pro safely. See Safety chapter

Prepare coffee beverages

In the centre of the WMF 1000 pro is a multifunction knob with four beverage buttons. Herein lie all the international coffee specialities that you can imagine. Each of the four buttons is assigned several beverages.

Beverage button overview

1x brief 2x brief 1x long 1x brief 2x brief 1x long 1x espresso 2x espresso 1x ristretto 1x cappuccino 2x cappuccino 1x cafe latte 1x caf crme 2x caf crme 1x mug caf crme 1x latte macchiato 2x latte macchiato 1x espresso macchiato 1x brief 2x brief 1x long 1x brief 2x brief 1x long
Example: Prepare two glasses of latte macchiato
Here is a step-by-step description of how to prepare two glasses of latte macchiato. This description serves as an example for the preparation of all beverages. All steps are carried out for the preparation of the other beverages according to the example. >> If necessary, adjust the height of the AllinOne professional spout to the height of the drinking vessel >> Place two appropriate drinking vessels under the AllinOne professional spout >> Press the Latte Macchiato button 2x brief See beverage button overview. The beverage button pressed lights up white. The display indicates: 2x latte macchiato
Set the height of the AllinOne professional spout, see page 19 Coffee preparation using the manual insert, see page 17 Preparing milk and milk foam, see page 17
Depending on the setting, the coffee beans are ground appropriately for the selected beverage. The preparation occurs as specified in the beverage settings. The machine automatically switches from milk to milk foam during the beverage preparation. The beverage is prepared and dispensed into the drinking vessels underneath the spout. The readiness display indicates:

>> The flow of steam stops when you release the button or automatically after no more
than 8seconds your selection pls 08:15 17.10.2007 Produces hot steam! Cup can be very hot! Do not use without a cup and never without the drip tray grid in place! Use heat-resistant drinkware! Never use without the preheater plate! Do not leave children unattended around the machine when switched on!

Control buttons

So that you will be delighted not only by the especially good taste of the coffee, but also by the elegant design of the machine, we decided to rely on a small number of multi-function buttons for operation. Off/C button Switching on Switching off (> 2 seconds) Cancel Timer operation
Program button/P button/WMF Steam-Jet cup preheater Introduction to settings Confirm a selection Start WMF Steam-Jet cup preheating (> 2 seconds) Minus button / Aroma button / Care button Browse back through the programs with minus Reduce coffee strength for the next beverage Care menu (> 2 seconds) Plus button/Aroma button Page forwards with the plus button Increase coffee strength for the next beverage
Operating and lighting concept
The lighting system helps you with navigation. Only the available buttons are lighted. White symbols: Press 1x briefly Orange symbols: Press 2x briefly
Switching the coffee machine on and off Switching on
>> Press the Off/C button The welcome display appears, then the coffee machine heats up.
WELCOME of your WMF 1000 heating up.
Time from switching on until readiness state approx. 4 min.
>> Place a container for the rinse water (approx. 120ml) under the AllinOne professional spout
After the machine is heated up, there is a coffee system rinse. This rinse warms up all the pipes. The coffee system rinse lasts approx. 40 seconds; after this, the machine is ready to operate. your selection pls 08:15 17.10.2007 The readiness state display appears.

Switching off

>> Press the Off/C button for approx. 2 seconds >> Place a container for the rinse water (approx. 120ml) under the AllinOne professional spout
If beverages with milk (such as caf latte) were prepared, then you will be asked to perform a milk system rinse. A coffee system rinse begins after that. Follow the display messages. The machine switches off.
Milk system rinse See Care chapter > Care programs
Switching the coffee machine on and off in timer operation Setting the automatic switch-on time

Check the grinding degree using the WMF Perfect Extraction System
>> Place a collecting vessel underneath for the coffee system rinse to follow >> Use the button to browse through to +
grinding adjustment OK: P browse: -/+
>> Select the grinding degree setting program by pressing the P button
An automatic coffee system rinse starts. A brewing test begins immediately thereafter. >> Place a drinking vessel under the AllinOne professional spout brewing test Test grinding degree The brewing pressure is shown in the form of a bar diagram during the brewing test. Low brewing pressure coarse grinding degree milder aroma High brewing pressure fine grinding degree stronger aroma min. press. max.
After a few seconds, the grinding degree setting is shown in the display: Grinding degree OK grinding degree OK Test: P end: C The brewing pressure is within the optimum range. No further adjustment is necessary. The grinding degree can be adjusted as needed. >> Press off/c to end grinding degree setting
Set grinding degree, see page 29
Settings Grinding degree too coarse Signs: The coffee flows too fast, the crme is too light and has too little body, the aroma is flat. grinding too coarse Test: P end: C
>> Turn the multitool one rotation clockwise to set the grinding degree finer.
Test the new grinding degree setting
>> Place a drinking vessel under the AllinOne professional spout >> Briefly press the P button.
Two new brewing tests automatically start, one after the other The brewing pressure is shown in the form of a bar diagram during the second brewing test. Low brewing pressure coarse grinding degree milder aroma High brewing pressure fine grinding degree stronger aroma After a few seconds, the grinding degree setting is shown in the display: >> Press off/c to end grinding degree setting Grinding degree too fine grinding too fine Test: P end: C
Set grinding degree, see page 29 Set coffee strength, see page 26
Display brewing pressure bar diagram, see page 28
>> Turn the multitool one rotation anticlockwise to set the grinding degree coarser. >> Test the new grinding degree setting (see above) >> Press off/c to end grinding degree setting

Set the grinding degree

Use the multitool supplied in the accessories box!
>> Place the multitool into the grinding degree adjustment on the left side of the coffee machine. >> Adjust the grinding degree by one rotation

The care of your WMF1000pro is very important, not least so that your coffee is always prepared perfectly. The display notifies you as soon as the WMF1000pro must be rinsed, cleaned or descaled. The unique WMF Connect and Clean milk system rinse provides you with a very easy to maintain cleaning system for beverages with milk components.

Care overview

Care programs: Warm-up rinse/Coffee system rinse Milk system rinse WMF Connect and Clean Cleaning the machine - Cleaning program replace water filter Descale machine Manual cleaning: Cleaning the milk system Cleaning the brewing unit Cleaning the coffee grounds container Cleaning the water tank Drip tray cleaning Cleaning the bean hopper Machine casing cleaning

See Care programs

See Manual cleaning

General care program

When switching the machine on and off, an automatic coffee system rinse starts automatically. This requires that sufficient water be in the tank at all times. The rinse water (min. 200ml) is caught in the drip tray. Empty the drip tray regularly or place a container under the AllinOne professional spout during the rinse. After each brewing cycle, in the heating up phase and during the care programs, so-called release water runs into the drip tray. This rinses any remaining coffee from the pipes. This is a completely normal procedure and not an error in the coffee machine. WMF assumes no liability for damage due to lack of cleaning or descaling or due to the use of other cleaning or descaling agents than those provided by WMF. All guarantee and warranty claims then lapse. Cleaning and descaling agents are irritants and during execution of the programs, they become very hot. Avoid any contact with these liquids. The plastic parts of the coffee, with the exception of the water tank, machine may not come into contact with the descaling agent. Follow the instructions on the packaging and in the Safety chapter.

Call up the care program

To select the care programs without a previous request on the display:
>> Press the care button for approx. 2 seconds
select care program browse: Care button
>> Use the care button to browse to the desired program >> Select the displayed program with the P button

place 3L container under h.w. spout
and Start-up > Basic settings
>> Place a 3 litre container under the hot water spout >> Start the filter rinse with the care button
rinsing filter. time remaining: 4 min. When rinsing the filter, you will hear unusual noises. This is normal. The noises will end during the filter rinse. During further operation, everything will sound normal again. After the rinse, the readiness state display appears. your selection pls 08:15 17.10.2007 Depending on the water hardness and the water flow, but after 3 months at the latest, the request appears to change the water filter. The filter change can be delayed by pressing the Off/C button.
Use the filter change for a thorough tank cleaning. Clean water tank, see page 45.

Descale coffee machine

Do not drink the descaling solution that comes out of the spout during descaling.
Total duration of descaling approx. 37 minutes. The procedure may not be interrupted. machine descaling OK:P brwse.:care-bt
>> Press the care button >> Empty the drip tray >> Pull the water tank out of the machine towards the front >> Remove the filter cartridge if a water filter is used (important) >> Pour a whole bottle of WMF liquid descaling agent (750ml) into the water tank >> Fill the water tank with water >> Remove the milk foamer and the milk hose >> Place an appropriate container (min. 3 litres) under the AllinOne professional spout >> Place another container (min. 1 litre) under the hot water spout >> Start the descaling with the care button
The descaling begins. A minute countdown indicates how long until the descaling will finish. descaling. time remaining: 37 min. After approx. 30 minutes, the following displays appear: empty water tank OK: P
See Cleaning the milk system
Place container underneath Tip: Instead of two containers, you can use a sufficiently large container which fits under both spouts.
>> Empty the water tank and rinse thoroughly with clear water

Refit the brewing unit after it has been dried.
>> Insert the brewing unit and push it firmly back into the housing until the handle (marked PRESS)
snaps in clearly and is level again [11]
>> Close the side door
If the brewing unit cannot be inserted completely: Turn thread on the brewing unit head slightly to the left or right with the multitool until the brewing unit slides into the guide. Never use force!

General cleaning

Never clean the water tank, drip tray or the coffee grounds container in the dishwasher! Clean the coffee grounds container
>> Empty the coffee grounds container and rinse with water
The All-in-One professional spout must be in the lowest position and the milk hose must not sit in front of the grounds container. Clean the water tank
>> Empty the water tank >> Remove the filter cartridge and the adapter (if a filter is used) >> Remove debris in the tank and on the adapter with a scrub brush >> Rinse the water tank with water >> Check smooth running of the float (red plastic part) in the guide >> Replace the water tank
Heavy calcium deposits can be removed with the WMF descaling agent. After descaling, rinse the water tank thoroughly in order to remove the descaling debris. Clean the drip try and drip tray grid
>> Empty the drip tray and drip tray grid and rinse with water >> Insert the drip tray and drip tray grid

Clean the bean hopper

>> Switch-off the machine, pull the mains connector >> Wipe out the bean hopper with a dry, lint-free cloth
Machine casing cleaning/front panel cleaning
>> Switch off the machine, unplug the power cord >> Clean the housing with adamp cloth
It is best to clean the stainless steel front and the side parts using the WMF stainless steel cleaning cloth from the specialty shop.

Tips and tricks

Tips and Tricks for Perfect Coffee Beverages Tips and tricks Water quality
Water quality is extremely important for preparing your coffee specialties. Excessive lime and chlorine will adversely affect the aroma. Prevent this by using the WMF water filter. Descaling also protects your WMF1000pro against scaling. Change the water in the tank after long idle periods.

Programming the taste of the coffee
Program the coffee strength and the amounts of water, foam and milk individually to your taste for each coffee specialty.
Preheating cups with the WMF Steam-Jet
Warm up your cups quickly and easily with the WMF Steam-Jet cup preheating feature. Your espresso and all other drinks will stay hot longer.

Pre-brew

The pre-brew function is set at the factory for all coffee specialties except caf crme. Activate this setting for caf crme also if you prefer a stronger coffee aroma.

The right cups

Brewing temperature
The brewing temperature is factory-set to 92C, which is ideal for coffee with 100% Arabica beans. If you are using coffee with a proportion of Robusta beans, a reduction in brewing temperature to no less than 88C is recommended.
Use espresso cups of thick porcelain, which retain the pre-warm heat better. Their maximum capacity is 60ml - but they should only ever be filled two-thirds full - and they are tapered. If the cups are too large, they allow the espresso to cool down too quickly at the surface.

Warm-up rinse

Run a warm-up rinse on the machine after switching on and after pauses in use. This brings the WMF1000pro up to its ideal operating temperature. For a good espresso it is particularly important that it is hot.
WMF Perfect Extraction system
Together with the quantity of ground coffee, the grinding degree influences the generation of the body or richness of the coffee, and the formation and persistence of the crme. The finer the coffee is ground, the more strongly its contents are released into the coffee. Adjust the grinding degree using the WMF Perfect Extraction System so that it is optimal for the type of coffee used.
Inserting water filter - see Start-up chapter; Warm-up rinse - see Care chapter; Programming coffee taste - see Beverage settings chapter; Setting brewing temperature - see Basic settings chapter; Setting grinding degree - see Grinding degree setting chapter; Pre-brewing - see Beverage settings chapter; Coffee bean filling - see Start-up chapter.

Varieties of coffee

Coffee is assessed by its qualities such as acidity, aroma, body and fragrance. 100% Arabica guarantees top quality. In the end, which top-quality coffee that comes to your breakfast table is down to your individual taste.

Types of milk

Milk foam comprises the protein elements in the milk. A high protein content in the milk increases the quality and stability of the milk foam.

Espresso macchiato Espresso with a shot of milk foam. The smaller version of a cappuccino.
Milk Hot milk or milk foam. Refined palates sprinkle cocoa powder under it.

Messages and Tips

Messages and Tips Operating messages Empty coffee grounds container
empty grounds cont. beverage sel. locked grounds cont.missing The coffee grounds container is full >> Remove the coffee grounds container, empty it and rinse it with water >> Wipe the coffee grounds container dry >> Replace the coffee grounds container >> Confirm with the P button

Refill water tank

The water tank is nearly empty
beverage sel. locked refill water tank
>> Remove the water tank and fill it >> Replace the water tank

Empty drip tray

empty drip tray beverage sel. locked drip tray missing The drip tray must be emptied >> Remove the drip tray and empty it >> Replace the drip tray

Bean hopper is empty

refill beans confirm beverage There are not enough coffee beans in the coffee bean hopper Grinding is interrupted >> Pour coffee beans into the bean hopper >> Press the beverage button again The grinding process continues and the additional coffee required for the brewing cycle is ground The selected beverage is then brewed.

Insert coffee grounds

insert coff. grounds select beverage The manual insert lid is open >> Insert the ground coffee >> Close the manual insert >> Select the desired beverage with the beverage button This procedure can be cancelled with the Off/C button. Already-inserted ground coffee is removed via the coffee grounds container.

Change filter

your selection pls replace water filter The water filter must be changed >> Change filter (see Care chapter)

Side door open

beverage sel. locked side door open The right-hand side door of the coffee machine is open >> Close the right-hand side door >> Close lock completely

Quick reference 64

Storage 47 Switch-off time 30, 31 Switch-on time 22, 30 Switch coffee machine on 21 Switching off 20, 22 Switching on 21 Switch on the coffee machine 10
Read counters 31 Refrigerate milk 47 Rinse water filter 38
Technical Data 65 Test dispensing 25 Test the water hardness 8 Time 11, 30 Tips 50 Tips and tricks 46 Transport and disposal 61 Types of milk 47
Warranty ticket 64 Water hardness 11, 12 Water quality 46 Water volume 26 White symbols 20 WMF 1000 service ticket 61 WMF Service Hotline 60 WMF Steam-Jet 19 WMF1000 Service Center 60
Safety 57 Safety instructions 57 Scope of supply 64 Second type of coffee 17 Sequence of milk and coffee 27 Set coffee strength for the next beverage 16 Settings 24 Settings (Basic settings) 11 Setting the automatic switch-on time 22 Setting up 8 Side door open 52 Spare parts 64 Standby mode 22 Start-up 8 Start-up complete 13 Steam-Jet 19, 20

Unpacking 8

Varieties of coffee 46, 47
Warm-up rinse 35, 46 Warrantor 60 Warranty/Guarantee 59
2007-2008 WMF Aktiengesellschaft All rights, especially the rights of reproduction, publication and translation, are reserved. No part of this manual may be reproduced in any form or processed, duplicated or distributed using electronic systems without written consent. Subject to technical modification. Design and production/typesetting and print presentation: TecDoc GmbH; Geislingen, info@tecdocgmbh.de Translated from the German original edition. Printed in Germany.

Type 0510 BAL 10/08 - EN

WMF 1000 pro quick reference

Operation

1x brief 2x brief 1x long 1x brief 2x brief 1x long 1x espresso 2x espresso 1x ristretto 1x cappuccino 2x cappuccino 1x cafe latte 1x caf crme 2x caf crme 1x mug caf crme 1x latte macchiato 2x latte macchiato 1x espresso macchiato 1x brief 2x brief 1x long 1x brief 2x brief 1x long
Beverage buttons Milk foam button/ Milk button Hot water button
Press 1x briey 1 cup milk Readiness state display your selection pls 08:15 17.10.2007 Coffee strength for the next beverage Normal - standard setting Mild - about 15 % weaker 2 x minus button Strong - about 15 % stronger 2x plus button
press and hold Milk foam on request
Press 1x briey 1 glass hot water
press and hold Hot water on request
Other types of coffee using the manual insert: > Pour the ground coffee into the manual insert (not more than 15 g for a maximum of one cup) > Close the cover > Select the beverage with the beverage buttons This procedure can be cancelled with the Off/C button. Already-inserted ground coffee is removed via the coffee grounds container.
This manual does not replace the user manual. Always observe the safety instructions in the user manual, for your safety and for care of your WMF 1000 pro.
Storage of this quick reference
Care programs Warm-up rinse Milk system rinse Coffee machine cleaning
For filter change and descaling see user manual.
Calling up the care programs To select the care programs without a previous request on the display: >> Press the care button for approx. 2 seconds select care program browse: Care button >> Use the care button to browse to the desired program >> Select the displayed program with the P button
Warm-up rinse >> Place a collection vessel under the all-in-one professional spout >> Confirm the rinse with the P button >> Start the rinse with the care button
Manual cleaning: Cleaning the milk system
See user manual for brewing unit cleaning and general cleaning.

[1] [2] [3] [4]

Off/C button P button Cup preheating Minus button/Care Plus button
Milk system rinse >> Place a container under the all-in-one professionalspout >> Wipe off the outside of the milk hose with a clean, damp cloth >> Place the milk hose with the milk nozzle attached on to the hot water spout and turn it clockwise to the stop >> Start the rinse with the care button After rinsing (duration about 30 seconds): >> Turn the milk hose anticlockwise, disconnecting it from the hot water spout
Cleaning program >> Confirm machine cleaning with the P button >> The individual steps appear on the display on request >> Place a collection container (min. 3 litres) under the all-in-one professional spout >> Add a cleaning tablet together with the yellow sponge and close the cover >> Press the care button The cleaning program starts. After 5 minutes, the machine cleaning ends. The display calls for a manual milk system cleaning.
Milk system cleaning >> Release the milk foamer and remove it together with the milk hose >> Disassemble all parts >> Leave them in the cleaning solution (1 measuring cap WMF milk system cleaner and 200ml water) for 5 hours or overnight >> Then rinse all parts thoroughly with running warm water >> Reassemble the milk foamer >> Attach the milk hose >> Install the all-in-one professional spout >> Insert the milk hose into the guide