PM5D Version2

Digital Mixing Console

PM5D Rear Panel

PM5D-RH

PM5D-RH Rear Panel
The PM5D and PM5D-RH Digital Mixing Consoles take the digital revolution to the next level.
The PM5D features standard high-performance head amps, while the PM5D-RH adds head-amp recall capability that allows
head amp gain settings to be recalled along with the other console scene data.
48 mono and 4 stereo inputs, 24 mix buses and 2 stereo outputs, and 8 matrix outputs (expandable). Custom DSP7 LSI for ultra-high-speed 96-kHz/32-bit processing. I/O capacity and functionality can be doubled or tripled by adding one or two rack-mountable DSP5D Digital Mixing Systems. Easy virtual soundcheck with individually assignable channels does not require complex re-patching. Built-in VCM (Virtual Circuit Modeling) effects offer impeccable simulations of classic signal processing gear. 8 high-performance multi-effect processors and 12 graphic equalizers built in. Enhanced security features keep the system operating flawlessly in any application.

ACCESSORIES

Gooseneck Lamp

OPTIONS

Digital Mixing System

PW800W

Power Supply Unit

Rear Panel

Digital Cabling Unit
The PM5D is reliably powered by an external power supply unit. The PW800W is extremely compact and lightweight (3U, 10kg). Thanks to its high efficiency, the low speed cooling fans are extremely quiet. Two PW800W units can be serially connected using optional PSL120 cable for failsafe operation. PW800W accepts 100 - 240 volts so it can be used anywhere.
GENERAL SPECIFICATIONS (PW800W)
* Please refer to the DSP5D/DCU5D datasheet for more details.

PSL120

Power Consumption Dimensions (W x H x D) Weight Included Accessories Temperature Operating Renge Storage
1000W 480 x 142 x 384mm (18.7" x 5.5" x 14.98") 10kg (22lbs) Power cord, Cord clamp, Owner's Manual 10C--35C --20C--60C

Power Supply Link Cable

DIMENSIONS (PW800W)

unit : mm

132 10

378 384

GENERAL SPECIFICATIONS (PM5D, PM5D-RH)
Internal processing Number of scene memories Sampling frequency rate 32bit (Accumulator=58bit) 500 Internal: E x ter n al: Signal Delay PM5D: 44.1kHz, 48kHz, 88.2kHz, 96kHz 44.1kH z ( -10% ) to 48kH z( +6% ) 88.2kH z ( -10% ) to 96kH z ( +6% ) Less than 2.3 ms INPUT to STEREO A,B (@fs = 48 kHz) Less than 1.15 ms INPUT to STEREO A,B (@fs = 96 kHz)
INPUT ST IN 1-4[L,R] INSERT IN 1-48 2TR IN ANALOG 1, 2 [L,R] TALKBACK
ANALOG INPUT SPECIFICATIONS (PM5D)
Input terminal PAD GAIN -60dB -16dB -34dB +10dB 3k 4k 10k 10k 3k Actual load impedance For use with nominal 50-600 Mics & 600 Lines 600 Lines 600 Lines 600 Lines 50-600 Mics & 600 Lines Input level Sensitivity -80dBu -36dBu -10dBu -54dBu -10dBu -16dBu -6dBu (-12dBu) -60dBu Nominal -60dBu -16dBu +10dBu -34dBu +10dBu +4dBu +4dBu (-2dBu) -50dBu Max. before clip -40dBu +4dBu +30dBu -14dBu +30dBu +24dBu +24dBu (+18dBu) -30dBu Connector
XLR3-31 type* XLR3-31 type* TRS Phone Jack* XLR3-31 type* XLR3-31 type*
P M 5D -R H : L es s th an 2.5 m s I N P U T to S T E R E O A ,B ( @fs = 48 kH z) Total harmonic distortion *1 CH Input to STEREO OUT Input Gain=Min. Less than 1.25 ms INPUT to STEREO A,B (@fs = 96 kHz) Less than 0.05%, 20Hz to 20kHz @+14dB into 600 Less than 0.01%, 1kHz @+18dB into 600 (@fs = 48 kHz) Less than 0.05%, 20Hz to 40kHz @+14dB into 600 Less than 0.01%, 1kHz @+18dB into 600 (@fs = 96 kHz) Frequency response Dynamic range 20Hz to 20kHz, 0.5, -1.5dB, @44.1kHz, 48kHz 20H z to 40kH z, 0.5, -1.5d B , @88.2kH z, 96kH z 110dB typ, DA Converter (STEREO OUT) 108d B ty p , A D +D A ( to S T E R E O O U T ) ( @fs = 48 kH z) Hum & noise level *2 Crosstalk (@1kHz) Input Gain=Min. Power requirements Power consumption Dimensions (W x H x D) Weight 106d B ty p , A D +D A ( to S T E R E O O U T ) ( @fs = 96 kH z) -128dB equivalent input noise -86d B r es id u al o u tp u t n o is e -100dB*3, -80dB adjacent input channels -100dB*3, -80dB input to output Refer to PW800W power requirements Refer to PW800W power consumption 1551 x 283 x 950mm (61" x 11.1" x 37.4") P M 5D : 98.0kg ( 215lb s ) P M 5D -R H : 97.0kg ( 213lb s ) *1. Total harmonic distortion is measured with a 18dB/Oct filter @80kHz. *2. Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with infinite dB/Oct attenuation *3.Crosstalk is measured with a 30 dB/octave filter @22 kHz.

ANALOG INPUT SPECIFICATIONS (PM5D-RH)
Input terminal PAD INPUT 1-48 & ST IN 1-4[L,R] GAIN -62dB +10dB Actual load impedance 3k 10k 3k For use with nominal 50-600 Mics & 600 Lines 600 Lines 50-600 Mics & 600 Lines Input level Sensitivity -82dBu -10dBu -6dBu (-12dBu) -60dBu Nominal -62dBu +10dBu +4dBu (-2dBu) -50dBu Max. before clip -42dBu +30dBu +24dBu (+18dBu) -30dBu Connector XLR3-31 type* XLR3-31 type* XLR3-31 type*
2TR IN ANALOG 1, 2 [L,R] TALKBACK
ANALOG OUTPUT SPECIFICATIONS (PM5D, PM5D-RH)
Output terminals STEREO A,B[L,R] MONITOR OUT[L,R,C] CUE OUT[L,R] MATRIX OUT 1-8 MIX OUT 1-24 Actual source For use with impedance nominal Lines 600 Lines 600 Lines 600 Lines 600 Lines 10k Lines 8 Phones 40 Phones Output terminals GAIN SW +24dB +18dB +24dB +18dB +24dB +18dB +24dB +18dB +24dB +18dB ------Nominal +4dBu -2dBu +4dBu -2dBu +4dBu -2dBu +4dBu -2dBu +4dBu -2dBu +4dBu 75mW 65mW Max. before Clip +24dBu +18dBu +24dBu +18dBu +24dBu +18dBu +24dBu +18dBu +24dBu +18dBu +24dBu 150mW 150mW Connectors XLR3-32 type* XLR3-32 type* XLR3-32 type* XLR3-32 type* XLR3-32 type* TRS Phone Jack * ST Phone Jack **
DIMENSIONS (PM5D, PM5D-RH)

INSERT OUT 1-48 PHONES

DIGITAL INPUT SPECIFICATIONS
Te rmi nal 1 2TR IN DIGITAL with SRC CASCADE IN AES/EBU AES/EBU COAXIAL F ormat AES/EBU AES/EBU IEC-60958 --Data length 24bit 24bit 24bit --L e ve l RS422 RS422 0.5Vpp/ 75 RS422 Conne ctor XLR3-31 type XLR3-31 type RCA Pin Jack D-sub Half Pitch Connector 68Pin (Female)
DIGITAL OUTPUT SPECIFICATIONS (PM5D, PM5D-RH)

Te rmi nal

1450 1551
F ormat AES/EBU AES/EBU COAXIAL AES/EBU AES/EBU IEC-60958 ---
Data length 24bit 24bit 24bit ---
L e ve l RS422 RS422 0.5Vpp/ 75 RS422
Conne ctor XLR3-32 type XLR3-32 type RCA Pin Jack D-sub Half Pitch Connector 68Pin (Female)

2TR OUT DIGITAL

CASCADE OUT
CONTROL I/O SPECIFICATIONS (PM5D, PM5D-RH)
Terminal TO HOST MIDI TIME CODE IN U SB IN OU T TH R U S M P TE IN OU T Format USB1.1 MIDI MIDI MIDI SMPTE ----------PS/2 PS/2 ----Level --------0.3Vpp(min.)/ 10Vpp(max.), 10k TTL/75 (ON/OFF) TTL/75 --RS422 RS422 --2.5V-11.5V -Connector B Ty p e U S B C o n n ecto r D I N C o n n ecto r 5P D I N C o n n ecto r 5P D I N C o n n ecto r 5P X L R 3-31 Ty p e* B N C C o n n ecto r B N C C o n n ecto r D-Sub Connector 25P (Female) D-Sub Connector 9P (Male) D-Sub Connector 9P (Female) DIN Connector 6P DIN Connector 6P XLR4-31 Type PCMCIA (Compact Flash)
WORD CLOCK GPI HA REMOTE RS422 REMOTE KEYBOARD MOUSE LAMP 1, 2, 3 MEMORY CARD

PM5D-RH Version2

BLOCK DIAGRAM