O ROKR

Introducing O ROKR, the worlds first eyewear to stream digital music. Even better, O ROKR lets you wirelessly control the music. Just use the buttons on the frame to select songs on your Bluetooth music-streaming mobile phone or portable music player. (NOTE: A small add-on Bluetooth adapter may be required.) O ROKR also offers the convenience of hands-free wireless communication with a compatible mobile phone which means it works like a wireless phone headset, except theres nothing to clip on your ear. Best of all, O ROKR combines the leading Bluetooth technologies of Motorola with the world-class performance and protection of High Definition Optics (HDO), available only from Oakley.

CONTENTS

Introduction.3 Charging the Battery.4 Pairing With Your Phone and/or Music Device.5 Turning O ROKR On and Off.6 Adjusting Volume.6 Making and Receiving Calls.7 Controlling Music.8 Indicator Light.9 Audible Indicators.9 Oakley Frame and lens Technology.10 Cleaning.10 Changing the Lenses.11 Safety and General Information.12 Specifications.14

2006.02.21

IMPORTANT: READ ALL INCLUDED SAFETY INFORMATION BEFORE USING O ROKR.

INTRODUCTION

O ROKR gives you a mobile, wearable link to your Bluetooth enabled mobile phone with no cords or wires to get in the way. With the ability to stream digital music, O ROKR works like wireless stereo headphones and even lets you control the music wirelessly. Just use a mobile phone with music streaming capability or add a Bluetooth adapter to your portable music player. Make sure the Bluetooth enabled phone or adapter has Bluetooth A2DP (for wireless audio streaming) and Bluetooth AVRCP (for wireless control of music). These Bluetooth technologies allow the device to work with O ROKR.

Fast Forward / Next Song

Play / Pause
Fast Backward / Previous Song

USB Port Indicator Light

Volume Up Call Volume Down

CHARGING THE BATTERY

Charge O ROKR for 3 hours before using it the first time. (For normal recharging, a fast charge of 1.5 hours will charge the battery to 80% capacity; 3 hours will provide a full charge.) When fully charged, O ROKR provides over 100 hours of standby time or 5 hours of talk time. If O ROKR hasnt been used for a while, the battery may need recharging. When the battery is low, you will hear warning tones every 60 seconds.
O ROKR comes with a wall charger. With the optional USB cable (sold separately), you can charge O ROKR by plugging it into any computer USB port. That way, you can leave the wall charger at home and use the USB cable at the office, or anywhere you have access to a computer.

TO CHARGE O ROKR

1. Plug the wall charger into an electrical outlet. 2. Plug the charger cable into the eyewear. Be sure to align the plug correctly. If the plug will not go in, try flipping it over. 3. When the indicator light is solid green, charging is complete.
WHEN CHARGING THE BATTERY, NOTE THE FOLLOWING:
Battery life depends on many things, including volume level and external temperature. The more time you spend talking on the phone or listening to music, the less standby time your rechargeable battery has with the remaining charge. Storing O ROKR fully charged in high temperature conditions may permanently reduce the life of the internal battery. Low temperature conditions may temporarily shorten battery life. The internal Lithium Ion Polymer battery is self-contained and cannot be replaced by the user. Any device with a rechargeable battery must be disposed of properly and may need to be recycled. Contact your local recycling center for proper disposal methods. WARNING: Never dispose of batteries in a fire. Doing so may cause them to explode.
PAIRING WITH YOUR PHONE AND/OR MUSIC DEVICE
Before you can use O ROKR to make a call, it must be paired with your Bluetooth enabled phone and/or music device. This is a one-time task. Once pairing is complete, O ROKR automatically connects to your phone and/or music device whenever you turn O ROKR on.
TO PAIR O ROKR WITH YOUR PHONE
1. On your phone, be sure the Bluetooth feature is turned on. For more information, consult the users guide that came with your phone. 2. With O ROKR turned off, press and hold the Call The indicator light will turn solid red. 3. Have your phone search for Bluetooth devices. (On most Motorola phones, this function can be found under Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.) For more information, consult the users guide that came with your phone. 4. Select Oakley O ROKR from the list of discovered devices on your phone. Follow the onscreen prompts to confirm your selection. 5. When prompted by the phone, enter the passkey 0000 (four zeroes). Follow the onscreen prompts to confirm your selection. button for 7 seconds.

When pairing is successful, the indicator light flashes green ten times and O ROKR turns on, ready for use. To pair O ROKR with another phone, follow the same instructions. O ROKR can store pairing information for up to eight different devices. See below for more information.
TO PAIR O ROKR WITH YOUR MUSIC PLAYER
For each music-streaming Bluetooth device, follow the instructions listed above. Some devices require an add-on Bluetooth adapter. Consult the users guide that came with your Bluetooth device or adapter for additional information.
WHEN PAIRING WITH ADDITIONAL DEVICES, NOTE THE FOLLOWING:
If you are pairing with a device that offers no means of entering the four zeroes mentioned in the instructions above, simply put O ROKR and the device in pairing mode then wait a few seconds. Pairing should occur automatically. O ROKR keeps a list of the paired devices in its internal memory. The list is in chronological order. When you pair a device beyond the maximum total of eight, the least used device on the list is removed from memory. Any of the eight paired devices can initiate a connection with O ROKR. As long as you initiate the connection from the device, O ROKR will connect to it. Two different devices (such as a phone and an MP3 player) can be wirelessly connected to O ROKR at the same time. However, two similar devices (such as two phones) cannot. Whichever device initiates the connection to O ROKR becomes the last device connected to in the memory list. When you initiate a connection from O ROKR (by pressing the Call button), for a phone connection, or PLAY/PAUSE button,
for music connection O ROKR will automatically initiate a connection to the last device it was connected to. If you want O ROKR to connect to a different device in its memory list, you must initiate the connection from that device.
TURNING O ROKR ON AND OFF
To turn O ROKR on: Press and hold the Call button for approximately three seconds until you hear four audio tones rising in pitch, or you see the indicator light flash red > amber > green > green. To turn O ROKR off: While O ROKR is not being used for an active call, press and hold the Call button for approximately three seconds

until you hear four audio tones descending in pitch, or you see the indicator light flash green > amber > red > red. NOTE THE FOLLOWING: When O ROKR is activated (and not being used for music), it is in standby mode, ready to answer a call. The internal rechargeable battery offers over 100 hours of standby time. When O ROKR is turned off, it uses no power. However, the internal rechargeable battery will naturally lose power over time, and will eventually require charging.

ADJUSTING VOLUME

To adjust volume, use the Volume Up and Volume Down buttons on the left stem. repeatedly until you reach the desired volume level. repeatedly until you reach the desired volume level. To increase speaker volume, press the front volume button To decrease speaker volume, press the back volume button
While adjusting volume in phone mode, you will hear a single high tone when the maximum or minimum volume level is reached. (You will not hear these tones while adjusting music volume.)
MAKING AND RECEIVING CALLS
In addition to the volume buttons, the Call button is all you need to use O ROKR with your phone.

USING O ROKR FOR CALLS

TURN O ROKR ON ANSWER A CALL ADJUST VOLUME
Press and hold the Call Press the Call

button for 3 seconds.

button briefly. button repeatedly to increase the volume. button repeatedly to decrease the volume. button for 1 second, until a medium pitch tone is heard. Repeat to release from mute.
Press the Volume Up Press the Volume Down
MUTE THE MICROPHONE END A CALL TURN O ROKR OFF
Press and hold the Volume Down Press the Call button briefly.

Press and hold the Call

Note that if communication between O ROKR and your phone is interrupted (such as when you move O ROKR out of range), O ROKR will attempt to reestablish the link.
Additional functions depend on what Bluetooth profile your mobile phone supports. O ROKR supports both the Bluetooth Headset and Handsfree profiles. The tables below give instructions for each profile. When using the tables, please note the following: O ROKR must be turned on for the functions to work. If your phone supports the dial by voice feature, the phone must be turned on (in idle mode) for the feature to work. (Note: Some phones do not support dial by voice over a headset.) Some phones do not support all the features listed. Please consult the users guide that came with your phone. Features like Three-way Calling may require additional services from your phone service provider.

HANDSFREE PROFILE

REJECT A CALL DIAL BY VOICE REDIAL A NUMBER PUT A CALL ON HOLD ANSWER 2ND INCOMING CALL
(AND PUT CURRENT CALL ON HOLD)

button for 2 seconds.

button briefly then speak the name or command. button for 2 seconds. button for 2 seconds. button for 2 seconds.
Press and hold the Call Press and hold the Call Press and hold the Call Press the Call
TRANSFER CALL FROM PHONE TO O ROKR

button briefly.

HEADSET PROFILE
SEND A NUMBER DIALED ON THE PHONE DIAL BY VOICE REDIAL A NUMBER TRANSFER CALL FROM PHONE TO O ROKR
Press the Call Press the Call
button briefly. button briefly then speak the name or command. button for 2 seconds. button for 2 seconds.
Press and hold the Call Press and hold the Call

CONTROLLING MUSIC

Use O ROKR to wirelessly control music from your Bluetooth music-streaming phone or music player. If a call comes in while music is playing, just press the Call button on O ROKR to pause the music and take the call. After the call is finished, press the Call button again to go back to where you left off in the music. Note the following: If you dont hear music, be sure your music-streaming phone or music player is on; be sure it is properly paired with O ROKR (see the section on pairing); and be sure the Bluetooth function on your phone or music player is activated. Also try increasing the volume level on O ROKR. Whenever you want to make a call, simply press the Call button.
When O ROKR is in use for a call, its music control buttons are deactivated. Some music players do not support the feature that pauses the music when a call is received. For those players, O ROKR will mute the music during a call.

USING O ROKR FOR MUSIC

TURN O ROKR ON PLAY MUSIC STOP MUSIC PAUSE / RESUME PLAYING
Press and hold the Call Press the Play / Pause
button for 4 seconds. button briefly. button for 1 second.
Press and hold the Play / Pause Press the Play / Pause

ADJUST VOLUME

Press the Volume Up button repeatedly to increase the volume. button repeatedly to decrease the volume. Press the Volume Down Press the Fast Forward / Next Song button briefly. button. button briefly. button.
SKIP TO NEXT SONG FAST FORWARD WITHIN A SONG PLAY PREVIOUS SONG FAST BACKWARD WITHIN A SONG TURN O ROKR OFF

Press and hold the Fast Forward / Next Song Press the Fast Backward / Previous Song
Press and hold the Fast Backward / Previous Song Press and hold the Call button for 3 seconds.

INDICATOR LIGHT

The indicator light on O ROKR provides the following information:

DURING PAIRING

The light is solid red. It to flashes green ten times when pairing is successful. Solid green = fully charged Solid amber = 99% to 50% charged Solid red = 49% to 0% charged The light flashes every 3 seconds: Green indicates 100% to 67% charge remaining. Amber indicates 66% to 34% charge remaining. Red indicates 33% to 0% charge remaining. The light flashes twice in red every 4 seconds. The light flashes red > amber > green > green. The light flashes green > amber > red > red.

DURING CHARGING

WHILE WIRELESSLY CONNECTED TO A DEVICE
WHILE NOT CONNECTED TO A DEVICE WHILE POWERING UP WHILE POWERING DOWN

Note the following:

Bluetooth Sniff Mode technology ensures that power usage is minimized. The only time O ROKR does not use power is when it is completely turned off. However, even when not used, the internal rechargeable battery gradually loses power over time and requires recharging.

AUDIBLE INDICATORS

Sound tones provide the following information:
DUAL HIGH/LOW TONE EVERY 60 SECONDS
Low battery. Out of range. (Move O ROKR closer to your phone or Bluetooth enabled audio device.)
NO AUDIBLE TONES; DETERIORATING AUDIO QUALITY; SKIPPING MUSIC
SINGLE HIGH TONE DURING VOLUME ADJUSTMENT RING TONE SINGLE HIGH TONE
Maximum or minimum volume level has been reached. Phone mode only. Incoming call. Pairing is confirmed. Initiate voice activation. (Speak the name of the person you want to dial.) Voice tag not recognized. (The name of the person you want to dial was not recognized.) Microphone is muted. O ROKR is turned off. O ROKR is turned on.

SINGLE LOW TONE

DUAL HIGH/LOW TONE
SINGLE MEDIUM TONE EVERY 20 SECONDS FOUR TONES, LOW TO HIGH FOUR TONES, HIGH TO LOW
OAKLEY FRAME AND LENS TECHNOLOGY
You're now wearing the best eye protection on earth. Only Oakley utilizes pure Plutonite lens material, a proprietary synthetic that exceeds the optical requirements of ANSI Z87.1 standards while inherently blocking 100% of all UVA, UVB, UVC and harmful blue light. Oakley performance eyewear also takes advantage of patented XYZ Optics, a breakthrough that maintains precise clarity at all angles of vision and extends the range of optical correction to the periphery of dual-spherical eyewear lenses and single-lens sports shields.

All Oakley sunglasses satisfy ANSI Z80.3 & EN 1836 standards for optical and mechanical performance and are in accordance with the EC Directive 89/686/EEC for the I.P.D. of category I corresponding to the European Community. Light transmission ranges from 10% to 39% of available light. All transmission profiles are based on data obtained according to ANSI Z80.3 and EN 1836 test protocols. LENS TINT TRANSMISSION PROFILES Grey: protection index 2 Bronze Iridium: protection index 2 Black Iridium: protection index 3 18% 22% 10%
The sunglass lens type is printed on the package. The corresponding protection index can be found in the Lens Tint Transmission Profiles chart above. Protection Index (in compliance with the standard EN 1836) Index 0: Aesthetic, very low protection Index 1: For weak sun luminosity Index 2: For average sun luminosity Index 3: For strong sun luminosity

CLEANING

How to keep the best at their best All Oakley Lenses: To help maintain the High Definition Optics (HDO) of Oakley lenses, your new eyewear comes with a speciallywoven electrostatic Microclear bag for cleaning and storage. Using it will preserve the superior optical quality of Oakley's pure Plutonite lenses. Hand wash and air-dry the Microclear bag regularly. Iridium Lenses: Oakley Iridium lens coating is engineered to reduce glare and improve contrast. An array of available tints allows the wearer to balance light transmission in any light condition. The 12-micron jacket of Iridium must be treated with special care to avoid scratching. Never use cleaning solutions. Use only mild soap and water, and dry by gently blotting with the Microclear bag provided. When cleaning O ROKR, please note the following: O ROKR is not waterproof. Moisture may damage the electronic circuitry. Do not rinse or immerse any part of the frame. Keep the frame dry at all times. Before cleaning, make sure O ROKR is unplugged from the wall charger. Do not clean the lenses with soaps, detergents, ammonia, alkaline cleaners, abrasive cleaning compounds or solvents. These substances may damage the lens coatings or leak into the module and damage the electronic circuitry. Should a lens become scratched, have it replaced immediately to ensure your vision is not compromised.

CHANGING THE LENSES

The lenses of O ROKR can be easily changed. The instructions below show you how to remove the current lenses and install a different set. WARNING: Follow these instructions carefully. Failure to do so may adversely affect optical performance. Improperly installed lenses may fail to stay in place, causing interference with your vision.

To remove the lenses:

1. Hold the frame upside down as shown in Figure 1. Grip the lens with one hand. Grip the frame with your other hand by placing your index finger on the nose bridge and your thumb beneath the frame rim. 2. Gently flex the frame by applying upward pressure with your thumb and outward pressure with your index finger. (See Figure 2.) Pull the lens out of the groove.

To install new lenses:

1. Hold the frame upside down as shown in Figure 1. Slide the lens into place so the outer edge tab fits into the frame slot. 2. Rotate the lens into the frame groove until the inner edge tab slides gently into the frame slot. 3. Hold the lens firmly. With your other hand, slide your thumb along the frame edge until the inner lens tab snaps firmly into place.
SAFETY AND GENERAL INFORMATION
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. O ROKR complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR sec 15.19 (3).

USE AT YOUR OWN RISK

AVOID DISTRACTION Using headsets while operating a motor vehicle, motorcycle or bicycle is dangerous, and is illegal in some states. Check your local laws. Use caution while using your O ROKR when engaging in ANY activity that requires your full attention. While engaging in such activity, remove al of speakers from your ears or turning off the sound will keep you from being distracted, so as to avoid accident or injury. Avoid placing or receiving calls while driving an automobile, motorcycle, equipment or any other motorized mode of transportation to reduce the risk of accident or injury. AVOID HEARING DAMAGE Using the headset at high volume may result in permanent hearing loss. If you experience ringing in your ear, reduce the volume or discontinue using O ROKR. With continued use at high volume, your ear may become accustomed to the sound level, which may result in permanent damage to your hearing. Keep O ROKR volume at a safe level. EYEWEAR USE This eyewear is not designed to protect the wearer from all injury in the event of impact with hard objects or if the lens or lenses are not properly secured in the frame. It is not recommended to use tinted lenses for night driving, or direct viewing of the sun or strong artificial light sources. Sunglasses are not recommended for industrial protection. AVOID MOISTURE Using O ROKR in or near water or other liquids, or in wet locations, may cause electric shock and serious injury. The device is not waterproof, so follow these safeguards: Do not use O ROKR while swimming or bathing. Do not wear O ROKR in the rain. Do not wear O ROKR during prolonged periods of perspiration. If any food or liquid is spilled on O ROKR or its power adapter, unplug the charging cable from O ROKR and unplug the power adapter from the electrical outlet before drying. LOCATION OF USE O ROKR is NOT to be used in the vicinity of any explosive or hazardous substances, as it may become volatile and cause serious injury or death. See "Electromagnetic Interference" below for restrictions on using O ROKR in medical facilities and aboard aircraft.

SAFETY INFORMATION: WIRELESS DEVICES
ELECTROMAGNETIC INTERFERENCE RF ENERGY WARNING To avoid electromagnetic interference and/or compatibility conflicts, turn off your device in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external radio frequency (RF) energy emitted by your device. AIRCRAFT While aboard aircraft, turn off your device when instructed to do so. Any use of the device must be in accordance with applicable regulations per airline crew instructions. MEDICAL DEVICES Hearing Aids: Some devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your hearing aid manufacturer to discuss alternatives. Other Medical Devices: If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. ELECTRONIC SYSTEMS Do not expose O ROKR to strong magnetic fields such as those that surround stereo speakers and TV picture tubes, in your car or home, without first checking with the manufacturer of those items.
PROPER CARE OF YOUR O ROKR
DO NOT MODIFY OR DISMANTLE Do not attempt to open O ROKR. Doing so may expose you to electric shock and serious injury. There are no user-serviceable parts inside. Any attempt to alter or repair the unit will void the limited warranty. Users are not permitted to make changes or modify the device in any way. Changes and modifications void the user's authority to operate the device. See 47 CFR Sec. 15.21. BATTERY Do not attempt to remove the internal rechargeable battery. Disposal of devices that contain internal rechargeable batteries must be in accordance with local environmental regulations. TEMPERATURE Do not store or use O ROKR in temperatures lower than -10C / -4F or higher than 50C / 122F. Do not recharge O ROKR in temperatures lower than 0C / 32F or higher than 40C / 104F. Conditions inside a parked car can exceed this temperature range. Do not store O ROKR in a parked car. Do not store O ROKR in direct sunlight. Storing O ROKR fully charged in high temperature conditions may permanently reduce the life of the internal battery. Battery life may temporarily shorten in low-temperature conditions. SHOCKWAVE Do not expose O ROKR to excessive force or impact. Be careful not to drop O ROKR. CHARGER Do not force the charging cable connector into the module port. If the connector won't go into the port, try flipping the connector 180 degrees. Do not attempt to charge O ROKR with any charger other than the one designed by Oakley specifically to be used with this product.

SPECIFICATIONS

Bluetooth Specifications. BT 2.0, backward compatible with 1.2 Bluetooth Profiles. Handsfree, Headset, A2DP, AVRCP Speaker Positioning. Fully articulated for adaptable fit Music Frequency Response. 20 Hz 20,000 Hz Telephony Frequency Response. 300 Hz 3,000 Hz Battery Life When Fully Charged. 5 hours* Battery Type. Integrated rechargeable Li-Ion Polymer Standby Time. Over 100 hours Charging Time. Fast charge (80% capacity) in 1.5 hours; full charge in 3.0 hours Connectivity. Built-in port for USB (Mini-B) cable connection Radio Frequency. 2.4 GHz, GFSK Weight. 52 grams Included Software. None required Included Accessories. Wall adapter for local region, User Guide CD, Quick Start Guide Optional Accessories. World Wall Charger, Oakley Car Charger, USB Cable, Soft Vault, Soft Box Warranty. Warranted by Motorola for 1 year Operation/storage environment. -10C to 50C (-4F to 122F); 5% to 90% relative humidity Charging environment. 0C to 40C (32F to 104F) *Battery life depends on numerous factors including volume level and environmental temperature.
Oakley, the Ellipse Logo, High Definition Optics and HDO are registered trademarks of Oakley, Inc. in the U.S. and other countries. Motorola, the Stylized M Logo and O Rokr are trademarks of Motorola, Inc. in the U.S. and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. in the U.S. and other countries. The Bluetooth trademarks are owned by their proprietor and used by Motorola under license. U.S. Patent Nos. 5648832, 5689323, 5969789, 6010218, 6168271 B1 U.S. and International Patents Pending 2006 Oakley, Inc.

2007.07.30

O ROKR PRO
Introducing O ROKR Pro, the worlds first eyewear to stream digital music. Even better, O ROKR Pro lets you wirelessly control the music. Just use the buttons on the frame to select songs on your Bluetooth music-streaming mobile phone or portable music player. (NOTE: A small add-on Bluetooth adapter may be required.) O ROKR Pro also offers the convenience of handsfree wireless communication with a compatible mobile phone which means it works like a wireless phone headset, except theres nothing to clip on your ear. Best of all, O ROKR Pro combines the leading Bluetooth technologies of Motorola with the world-class performance and protection of High Definition Optics (HDO), available only from Oakley.

CONTENTS

Introduction.3 Charging the Battery.4 Pairing With Your Phone and/or Music Device.5 Turning O ROKR Pro On and Off.6 Adjusting Volume.6 Making and Receiving Calls.7 Controlling Music.8 Indicator Light.9 Audible Indicators.9 Oakley Frame and lens Technology.10 Cleaning.10 Changing the Lenses.11 Safety and General Information.12 Specifications.14 Service and Support.15-16
IMPORTANT: READ ALL INCLUDED SAFETY INFORMATION BEFORE USING O ROKR PRO.

INTRODUCTION

O ROKR Pro gives you a mobile, wearable link to your Bluetooth enabled mobile phone with no cords or wires to get in the way. With the ability to stream digital music, O ROKR Pro works like wireless stereo headphones and even lets you control the music wirelessly. Just use a mobile phone with music streaming capability or add a Bluetooth adapter to your portable music player. Make sure the Bluetooth enabled phone or adapter has Bluetooth A2DP (for wireless audio streaming) and Bluetooth AVRCP (for wireless control of music). These Bluetooth technologies allow the device to work with O ROKR Pro.

Indicator Light

CHARGING THE BATTERY
Charge O ROKR Pro for 3 hours before using it the first time. (For normal recharging, a fast charge of 1.5 hours will charge the battery to 80% capacity; 3 hours will provide a full charge.) When fully charged, O ROKR Pro provides over 100 hours of standby time or 5 hours of talk time. If O ROKR Pro hasnt been used for a while, the battery may need recharging. When the battery is low, you will hear warning tones every 60 seconds.
O ROKR Pro comes with a wall charger. With the optional USB cable (sold separately), you can charge O ROKR Pro by plugging it into any computer USB port. That way, you can leave the wall charger at home and use the USB cable at the office, or anywhere you have access to a computer.

TO CHARGE O ROKR PRO

1. Plug the wall charger into an electrical outlet. 2. Plug the charger cable into the eyewear. Be sure to align the plug correctly. If the plug will not go in, try flipping it over. 3. When the indicator light is solid green, charging is complete.
WHEN CHARGING THE BATTERY, NOTE THE FOLLOWING:
Battery life depends on many things, including volume level and external temperature. The more time you spend talking on the phone or listening to music, the less standby time your rechargeable battery has with the remaining charge. Storing O ROKR Pro fully charged in high temperature conditions may permanently reduce the life of the internal battery. Low temperature conditions may temporarily shorten battery life. The internal Lithium Ion Polymer battery is self-contained and cannot be replaced by the user. Any device with a rechargeable battery must be disposed of properly and may need to be recycled. Contact your local recycling center for proper disposal methods. WARNING: Never dispose of batteries in a fire. Doing so may cause them to explode.

PAIRING WITH YOUR PHONE AND/OR MUSIC DEVICE
Before you can use O ROKR Pro to make a call, it must be paired with your Bluetooth enabled phone and/or music device. This is a onetime task. Once pairing is complete, O ROKR Pro automatically connects to your phone and/or music device whenever you turn O ROKR Pro on.

EASY PAIRING O ROKR PRO

1. Power on the headset by pressing the Call indicate the headset is in pairing mode. button. After a few moments, the indicator light will be steadily lit in red to
If the headset does not enter pairing mode, see section labeled TO MANUALLY PLACE O ROKR PRO IN PAIRING MODE below.
TO PAIR O ROKR PRO WITH YOUR PHONE
2. On your phone, be sure the Bluetooth feature is turned on.
For more information, consult the users guide that came with your phone.
3. Have your phone search for Bluetooth devices. On most Motorola phones, this function can be found under Settings > Connection > Bluetooth Link > Handsfree > Look for Devices
4. Select Oakley O ROKR PRO from the list of discovered devices on your phone. Follow the onscreen prompts to confirm your selection. 5. When prompted by the phone, enter the passkey 0000 (four zeroes). Follow the onscreen prompts to confirm your selection. When pairing is successful, the indicator light flashes green ten times and O ROKR Pro turns on, ready for use. To pair O ROKR Pro with another phone, follow the same instructions. O ROKR Pro can store pairing information for up to eight different devices.
TO MANUALLY PLACE O ROKR PRO IN PAIRING MODE
With O ROKR Pro turned off, press and hold the Call button for 7 seconds. The indicator light will turn solid red.
TO PAIR O ROKR PRO WITH YOUR MUSIC PLAYER
For each music-streaming Bluetooth device, follow the instructions listed above. Some devices require an add-on Bluetooth adapter. Consult the users guide that came with your Bluetooth device or adapter for additional information.
WHEN PAIRING WITH ADDITIONAL DEVICES, NOTE THE FOLLOWING:
If you are pairing with a device that offers no means of entering the four zeroes mentioned in the instructions above, simply put O ROKR Pro and the device in pairing mode then wait a few seconds. Pairing should occur automatically. To minimize pairing issues with additional devices, make sure that devices you have already paired with O ROKR Pro are off. O ROKR Pro keeps a list of the paired devices in its internal memory. The list is in chronological order. When you pair a device beyond the maximum total of eight, the least used device on the list is removed from memory. Any of the eight paired devices can initiate a connection with O ROKR Pro. As long as you initiate the connection from the device, O ROKR Pro will connect to it. Two different devices (such as a phone and an MP3 player) can be wirelessly connected to O ROKR Pro at the same time. However, two similar devices (such as two phones) cannot. Whichever device initiates the connection to O ROKR Pro becomes the last device connected to in the memory list. When you initiate a connection from O ROKR Pro (by pressing the Call button), for a phone connection, or PLAY/PAUSE button,

for music connection O ROKR Pro will automatically initiate a connection to the last device it was connected to. If you want O ROKR Pro to connect to a different device in its memory list, you must initiate the connection from that device.
TURNING O ROKR PRO ON AND OFF
To turn O ROKR Pro on: Press and hold the Call button for approximately three seconds until you hear four audio tones rising in pitch, or you see the indicator light flash red > amber > green > green. To turn O ROKR Pro off: While O ROKR Pro is not being used for an active call, press and hold the Call button for approximately three
seconds until you hear four audio tones descending in pitch, or you see the indicator light flash green > amber > red > red. NOTE THE FOLLOWING: When O ROKR Pro is activated (and not being used for music), it is in standby mode, ready to answer a call. The internal rechargeable battery offers over 100 hours of standby time. When O ROKR Pro is turned off, it uses no power. However, the internal rechargeable battery will naturally lose power over time, and will eventually require charging.

ADJUSTING VOLUME

To adjust volume, use the Volume Up and Volume Down buttons on the left stem. repeatedly until you reach the desired volume level. repeatedly until you reach the desired volume level. To increase speaker volume, press the front volume button To decrease speaker volume, press the back volume button
While adjusting volume in phone mode, you will hear a single high tone when the maximum or minimum volume level is reached. (You will not hear these tones while adjusting music volume.)
MAKING AND RECEIVING CALLS
In addition to the volume buttons, the Call button is all you need to use O ROKR Pro with your phone.
USING O ROKR PRO FOR CALLS
TURN O ROKR PRO ON ANSWER A CALL ADJUST VOLUME
Press and hold the Call Press the Call

button for 3 seconds.

button briefly. button repeatedly to increase the volume. button repeatedly to decrease the volume. button for 1 second, until a medium pitch tone is heard. Repeat to release from mute.

Press the Volume Up Press the Volume Down
MUTE THE MICROPHONE END A CALL TURN O ROKR PRO OFF
Press and hold the Volume Down Press the Call button briefly.

Press and hold the Call

Note that if communication between O ROKR Pro and your phone is interrupted (such as when you move O ROKR Pro out of range), O ROKR Pro will attempt to reestablish the link.
Additional functions depend on what Bluetooth profile your mobile phone supports. O ROKR Pro supports both the Bluetooth Headset and Handsfree profiles. The tables below give instructions for each profile. When using the tables, please note the following: O ROKR Pro must be turned on for the functions to work. If your phone supports the dial by voice feature, the phone must be turned on (in idle mode) for the feature to work. (Note: Some phones do not support dial by voice over a headset.) Some phones do not support all the features listed. Please consult the users guide that came with your phone. Features like Three-way Calling may require additional services from your phone service provider.

HANDSFREE PROFILE

REJECT A CALL DIAL BY VOICE REDIAL A NUMBER PUT A CALL ON HOLD ANSWER 2ND INCOMING CALL
(AND PUT CURRENT CALL ON HOLD)

button for 2 seconds.

button briefly then speak the name or command. button for 2 seconds. button for 2 seconds. button for 2 seconds.
Press and hold the Call Press and hold the Call Press and hold the Call Press the Call
TRANSFER CALL FROM PHONE TO O ROKR PRO

button briefly.

HEADSET PROFILE
SEND A NUMBER DIALED ON THE PHONE DIAL BY VOICE REDIAL A NUMBER TRANSFER CALL FROM PHONE TO O ROKR PRO
Press the Call Press the Call
button briefly. button briefly then speak the name or command. button for 2 seconds. button for 2 seconds.
Press and hold the Call Press and hold the Call

CONTROLLING MUSIC

Use O ROKR Pro to wirelessly control music from your Bluetooth music-streaming phone or music player. If a call comes in while music is playing, just press the Call button on O ROKR Pro to pause the music and take the call. After the call is finished, press the Call button again to go back to where you left off in the music. Note the following: If you dont hear music, be sure your music-streaming phone or music player is on; be sure it is properly paired with O ROKR Pro (see the section on pairing); and be sure the Bluetooth function on your phone or music player is activated. Also try increasing the volume level on O ROKR Pro. Whenever you want to make a call, simply press the Call button.

When O ROKR Pro is in use for a call, its music control buttons are deactivated. Some music players do not support the feature that pauses the music when a call is received. For those players, O ROKR Pro will mute the music during a call.
USING O ROKR PRO FOR MUSIC
TURN O ROKR PRO ON PLAY MUSIC STOP MUSIC PAUSE / RESUME PLAYING
Press and hold the Call Press the Play / Pause
button for 4 seconds. button briefly. button for 1 second.
Press and hold the Play / Pause Press the Play / Pause

ADJUST VOLUME

Press the Volume Up button repeatedly to increase the volume. Press the Volume Down button repeatedly to decrease the volume. Press the Fast Forward / Next Song button briefly. button. button briefly. button.
SKIP TO NEXT SONG FAST FORWARD WITHIN A SONG PLAY PREVIOUS SONG FAST BACKWARD WITHIN A SONG TURN O ROKR PRO OFF
Press and hold the Fast Forward / Next Song Press the Fast Backward / Previous Song
Press and hold the Fast Backward / Previous Song Press and hold the Call button for 3 seconds.

INDICATOR LIGHT

The indicator light on O ROKR Pro provides the following information:

DURING PAIRING

The light is solid red. It to flashes green ten times when pairing is successful. Solid green = fully charged Solid amber = 99% to 50% charged Solid red = 49% to 0% charged The light flashes every 4 seconds: Green indicates 100% to 67% charge remaining. Amber indicates 66% to 34% charge remaining. Red indicates 33% to 0% charge remaining. The light flashes twice in red every 4 seconds. The light flashes red > amber > green > green. The light flashes green > amber > red > red.

DURING CHARGING

WHILE WIRELESSLY CONNECTED TO A DEVICE
WHILE NOT CONNECTED TO A DEVICE WHILE POWERING UP WHILE POWERING DOWN

Note the following:

Bluetooth Sniff Mode technology ensures that power usage is minimized. The only time O ROKR Pro does not use power is when it is completely turned off. However, even when not used, the internal rechargeable battery gradually loses power over time and requires recharging.

AUDIBLE INDICATORS

Sound tones provide the following information:
DUAL HIGH/LOW TONE EVERY 60 SECONDS
Low battery. Out of range. (Move O ROKR Pro closer to your phone or Bluetooth enabled audio device.)
NO AUDIBLE TONES; DETERIORATING AUDIO QUALITY; SKIPPING MUSIC
SINGLE HIGH TONE DURING VOLUME ADJUSTMENT RING TONE SINGLE HIGH TONE
Maximum or minimum volume level has been reached. Phone mode only. Incoming call. Enter pairing mode. Pairing is confirmed. Initiate voice activation. (Speak the name of the person you want to dial.) Voice tag not recognized. (The name of the person you want to dial was not recognized.) Microphone is muted. O ROKR Pro is turned off. O ROKR Pro is turned on.

SINGLE LOW TONE

DUAL HIGH/LOW TONE
SINGLE MEDIUM TONE EVERY 20 SECONDS FOUR TONES, LOW TO HIGH FOUR TONES, HIGH TO LOW
OAKLEY FRAME AND LENS TECHNOLOGY
You're now wearing the best eye protection on earth. Only Oakley utilizes pure Plutonite lens material, a proprietary synthetic that exceeds the optical requirements of ANSI Z87.1 standards while inherently blocking 100% of all UVA, UVB, UVC and harmful blue light. Oakley performance eyewear also takes advantage of patented XYZ Optics, a breakthrough that maintains precise clarity at all angles of vision and extends the range of optical correction to the periphery of dual-spherical eyewear lenses and single-lens sports shields.
All Oakley sunglasses satisfy ANSI Z80.3 & EN 1836 standards for optical and mechanical performance and are in accordance with the EC Directive 89/686/EEC for the I.P.D. of category I corresponding to the European Community. Light transmission ranges from 10% to 39% of available light. All transmission profiles are based on data obtained according to ANSI Z80.3 and EN 1836 test protocols. LENS TINT TRANSMISSION PROFILES Grey: protection index 2 Bronze Iridium: protection index 2 Black Iridium: protection index 3 18% 22% 10%
The sunglass lens type is printed on the package. The corresponding protection index can be found in the Lens Tint Transmission Profiles chart above. Protection Index (in compliance with the standard EN 1836) Index 0: Aesthetic, very low protection Index 1: For weak sun luminosity Index 2: For average sun luminosity Index 3: For strong sun luminosity

CLEANING

How to keep the best at their best All Oakley Lenses: To help maintain the High Definition Optics (HDO) of Oakley lenses, your new eyewear comes with a speciallywoven electrostatic Microclear bag for cleaning and storage. Using it will preserve the superior optical quality of Oakley's pure Plutonite lenses. Hand wash and air-dry the Microclear bag regularly. Iridium Lenses: Oakley Iridium lens coating is engineered to reduce glare and improve contrast. An array of available tints allows the wearer to balance light transmission in any light condition. The 12-micron jacket of Iridium must be treated with special care to avoid scratching. Never use cleaning solutions. Use only mild soap and water, and dry by gently blotting with the Microclear bag provided. When cleaning O ROKR Pro, please note the following: O ROKR Pro is not waterproof. Moisture may damage the electronic circuitry. Do not rinse or immerse any part of the frame. Keep the frame dry at all times. Before cleaning, make sure O ROKR Pro is unplugged from the wall charger. Do not clean the lenses with soaps, detergents, ammonia, alkaline cleaners, abrasive cleaning compounds or solvents. These substances may damage the lens coatings or leak into the module and damage the electronic circuitry. Should a lens become scratched, have it replaced immediately to ensure your vision is not compromised.

CHANGING THE LENSES

The lenses of O ROKR Pro can be easily changed. The instructions below show you how to remove the current lenses and install a different set. WARNING: Follow these instructions carefully. Failure to do so may adversely affect optical performance. Improperly installed lenses may fail to stay in place, causing interference with your vision.

To remove the lenses:

1. Hold the frame upside down as shown in Figure 1. Grip the lens with one hand. Grip the frame with your other hand by placing your index finger on the nose bridge and your thumb beneath the frame rim. 2. Gently flex the frame by applying upward pressure with your thumb and outward pressure with your index finger. (See Figure 2.) Pull the lens out of the groove.

To install new lenses:

1. Hold the frame upside down as shown in Figure 1. Slide the lens into place so the outer edge tab fits into the frame slot. 2. Rotate the lens into the frame groove until the inner edge tab slides gently into the frame slot. 3. Hold the lens firmly. With your other hand, slide your thumb along the frame edge until the inner lens tab snaps firmly into place.
SAFETY AND GENERAL INFORMATION
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. O ROKR Pro complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR sec 15.19 (3).

USE AT YOUR OWN RISK

AVOID DISTRACTION Using headsets while operating a motor vehicle, motorcycle or bicycle is dangerous, and is illegal in some states. Check your local laws. Use caution while using your O ROKR Pro when engaging in ANY activity that requires your full attention. While engaging in such activity, remove al of speakers from your ears or turning off the sound will keep you from being distracted, so as to avoid accident or injury. Avoid placing or receiving calls while driving an automobile, motorcycle, equipment or any other motorized mode of transportation to reduce the risk of accident or injury. AVOID HEARING DAMAGE Using the headset at high volume may result in permanent hearing loss. If you experience ringing in your ear, reduce the volume or discontinue using O ROKR Pro. With continued use at high volume, your ear may become accustomed to the sound level, which may result in permanent damage to your hearing. Keep O ROKR Pro volume at a safe level. EYEWEAR USE This eyewear is not designed to protect the wearer from all injury in the event of impact with hard objects or if the lens or lenses are not properly secured in the frame. It is not recommended to use tinted lenses for night driving, or direct viewing of the sun or strong artificial light sources. Sunglasses are not recommended for industrial protection. AVOID MOISTURE Using O ROKR Pro in or near water or other liquids, or in wet locations, may cause electric shock and serious injury. The device is not waterproof, so follow these safeguards: Do not use O ROKR Pro while swimming or bathing. Do not wear O ROKR Pro in the rain. Do not wear O ROKR Pro during prolonged periods of perspiration. If any food or liquid is spilled on O ROKR Pro or its power adapter, unplug the charging cable from O ROKR Pro and unplug the power adapter from the electrical outlet before drying. LOCATION OF USE O ROKR Pro is NOT to be used in the vicinity of any explosive or hazardous substances, as it may become volatile and cause serious injury or death. See "Electromagnetic Interference" below for restrictions on using O ROKR Pro in medical facilities and aboard aircraft.
SAFETY INFORMATION: WIRELESS DEVICES
ELECTROMAGNETIC INTERFERENCE RF ENERGY WARNING To avoid electromagnetic interference and/or compatibility conflicts, turn off your device in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external radio frequency (RF) energy emitted by your device. AIRCRAFT While aboard aircraft, turn off your device when instructed to do so. Any use of the device must be in accordance with applicable regulations per airline crew instructions. MEDICAL DEVICES Hearing Aids: Some devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your hearing aid manufacturer to discuss alternatives. Other Medical Devices: If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. ELECTRONIC SYSTEMS Do not expose O ROKR Pro to strong magnetic fields such as those that surround stereo speakers and TV picture tubes, in your car or home, without first checking with the manufacturer of those items.

PROPER CARE OF YOUR O ROKR PRO
DO NOT MODIFY OR DISMANTLE Do not attempt to open O ROKR Pro. Doing so may expose you to electric shock and serious injury. There are no user-serviceable parts inside. Any attempt to alter or repair the unit will void the limited warranty. Users are not permitted to make changes or modify the device in any way. Changes and modifications void the user's authority to operate the device. See 47 CFR Sec. 15.21. BATTERY Do not attempt to remove the internal rechargeable battery. Disposal of devices that contain internal rechargeable batteries must be in accordance with local environmental regulations. TEMPERATURE Do not store or use O ROKR Pro in temperatures lower than -10C / -4F or higher than 50C / 122F. Do not recharge O ROKR Pro in temperatures lower than 0C / 32F or higher than 40C / 104F. Conditions inside a parked car can exceed this temperature range. Do not store O ROKR Pro in a parked car. Do not store O ROKR Pro in direct sunlight. Storing O ROKR Pro fully charged in high temperature conditions may permanently reduce the life of the internal battery. Battery life may temporarily shorten in low-temperature conditions. SHOCKWAVE Do not expose O ROKR Pro to excessive force or impact. Be careful not to drop O ROKR Pro. CHARGER Do not force the charging cable connector into the module port. If the connector won't go into the port, try flipping the connector 180 degrees. Do not attempt to charge O ROKR Pro with any charger other than the one designed by Oakley specifically to be used with this product. CARING FOR THE ENVIRONMENT BY RECYCLING When you see this symbol on a Motorola product, do not dispose the product with household waste. RECYCLING MOBILE PHONES AND ACCESSORIES The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems arent available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region. Warning: Never dispose of batteries in a fire because they may explode.

032375o

SPECIFICATIONS
Bluetooth Specifications. BT 2.0, backward compatible with 1.2 Bluetooth Profiles. Handsfree, Headset, A2DP, AVRCP Speaker Positioning. Fully articulated for adaptable fit Music Frequency Response. 20 Hz 20,000 Hz Telephony Frequency Response. 300 Hz 3,000 Hz Battery Life When Fully Charged. 5 hours* Battery Type. Integrated rechargeable Li-Ion Polymer Standby Time. Over 100 hours Charging Time. Fast charge (80% capacity) in 1.5 hours; full charge in 3.0 hours Connectivity. Built-in port for USB (Mini-B) cable connection Radio Frequency. 2.4 GHz, GFSK Weight. 49 grams Included Software. None required Included Accessories. Wall adapter for local region, User Guide CD, Quick Start Guide Optional Accessories. World Wall Charger, Oakley Car Charger, USB Cable, Soft Vault, Soft Box Warranty. Warranted by Motorola for 1 year Operation/storage environment. -10C to 50C (-4F to 122F); 5% to 90% relative humidity Charging environment. 0C to 40C (32F to 104F) *Battery life depends on numerous factors including volume level and environmental temperature.

SERVICE AND SUPPORT

If OROKR Pro does not function, follow the instructions under Troubleshooting in this user guide. In addition, go to www.oakley.com for the latest support information on OROKR Pro. If OROKR Pro still does not function, follow the procedures below to make a warranty claim. OAKLEY LIMITED WARRANTY In the United States, OROKR Pro is warranted against manufacturers defects for 1 year from the date of purchase. Outside of the U.S. please contact your local corporate office for warranty information. Coverage is valid only with proof of purchase from an Authorized Oakley OROKR Pro Dealer. Oakley will have the option, at its discretion, to repair or replace the defective product for the consumer. This warranty does not cover scratched lenses. Oakley may replace or repair the product with new or reconditioned parts or product, and the replaced parts or product become the property of Oakley. EXCLUSIONS AND LIMITATIONS Please note that this warranty does not cover the following defects or damages to your Oakley OROKR Pro product: 1) after the warranty expires; 2) if the product was not originally purchased from an authorized Oakley dealer; 3) from repair services or attempts not performed by Oakley; 4) from normal wear and tear; 5) from fire, earthquake, flood or other natural disasters; 6) from alteration or disassembly of product; 7) from accidents, neglect, water or moisture damage or abuse; 8) caused during shipment to Oakley.
Oakley is not liable for any damage to or loss of any data or other information stored on any media contained within the Oakley OROKR Pro product. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty. It is your responsibility to backup all data before returning your product to Oakley, and for restoring all data upon your products return to you.
THE WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. OAKLEY GRANTS NO OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE CUSTOMERS EXCLUSIVE REMEDY FOR A BREACH OF WARRANTY WILL BE THE REPAIR OR REPLACEMENT OF THE ITEM, AS DETERMINED BY OAKLEY IN THE EXERCISE OF ITS SOLE DISCRETION. TO THE MAXIMUM EXTENT PERMITTED BY LAW, OAKLEY IS NOT RESPONSIBLE FOR DIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING ANY COSTS OF RECOVERING OR REPRODUCING ANY DATA STORED IN OR USED WITH THE OAKLEY PRODUCT, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.

The governing law for any warranty claim will be the laws of the State of California, without reference to conflicts of law principles. Venue for any such action shall lie exclusively within the state or federal courts located in Orange County,California. No Oakley dealer, agent or employee is authorized to make any modification, extension or addition to this warranty. Legal rights under applicable national law governing the sale of consumer goods are not affected by this warranty.
OBTAINING WARRANTY SERVICE The defective product must be returned to Oakley by the owner with a Return Authorization (RA) number and a dated proofof purchase from an authorized Oakley OROKR Pro dealer. Call Oakley Customer Service at 800-403-7449 (U.S.) to request an RA number. Based on the information you provide, Customer Service will determine if an RA number should be issued. Credit card information must be provided for Customer Service to issue an RA number. Oakley cannot accept any product that does not include a valid RA number on the shipping package. RA numbers are valid for 15 days. If you ship the product to Oakley for warranty, you assume the risk of damage during shipping, so it is your responsibility to purchase any necessary insurance from your shipping carrier. You must use the original packaging (or the equivalent) and pay any applicable shipping charges.
NOTE: If product is returned with a claimed manufacturing defect yet is diagnosed to be NTF (No Trouble Found), or if the warranty is void pursuant to the above exclusions, a $39 diagnostic, shipping and handling fee will apply and will be charged to your credit card.
Product returned after expiration of the warranty period may be repaired or replaced, at Oakleys discretion, for a specified fee to the customer. Contact Oakley Customer Service for further details.
Within the United States, telephone our global headquarters at 1 (800) 403-7449 for warranty assistance. Customers outside the United States should contact their local corporate office for warranty information. In Europe, call Oakley Europe Customer Service at or write to infoeurope@oakley.com to have more information about the warranty procedure in case of defective products.
International Contact Information Local corporate offices: OAKLEY AFRICA +OAKLEY BRASIL +OAKLEY CANADA 9714 OAKLEY EUROPE BENELUX, FRANCE, ITALIA, SCANDINAVIA ESPAA 398 PORTUGAL 121 SVERIGE 1037 OAKLEY GMBH +OAKLEY JAPAN 146 OAKLEY MEXICO +OAKLEY SOUTH PACIFIC +OAKLEY UK LTD. +475 400
STATEMENT ACCORDING TO FCC PART 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. Consult the dealer or an experienced radio/TV technician for help. EUROPEAN UNION DIRECTIVES CONFORMANCE STATEMENT Hereby, Motorola declares that this product is in compliance with The essential requirements and other relevant provisions of Directive 1999/5/EC All other relevant EU Directives.

The above gives an example of a typical Product Approval Number. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your products label in the Search bar on the web site. FCC NOTICE TO USERS Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3). EXPORT LAW ASSURANCES Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. INDUSTRY CANADA NOTICE TO USERS Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device Ref IC RSS 210 Sec.5.11. The term IC before the declaration/registration number only signifies that registration was performed based on Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. See Ref IC Self-Marking 6(f) and RSP-100 Sec. 4.

AUSTRALIA

MEXICO
Oakley, the Ellipse Logo, High Definition Optics and HDO are registered trademarks of Oakley, Inc. in the U.S. and other countries. Motorola, the Stylized M Logo and O ROKR Pro are trademarks of Motorola, Inc. in the U.S. and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. in the U.S. and other countries. The Bluetooth trademarks are owned by their proprietor and used by Motorola under license. U.S. Patent Nos. 5648832, 5689323, 5969789, 6010218, 6168271 B1 U.S. and International Patents Pending 2007 Oakley, Inc.