EMP-54/EMP-73/EMP-74

Bright, Light and Affordable Mobile Projectors for Professional Presentations
High Bright 2000/1500 ANSI lumens Mobile Projectors Enhanced security features for complete peace of mind True SVGA/XGA Projectors, supporting VGA to SXGA/UXGA resolutions Silent Operation Mode Automatic Keystone Correction 6 separate Colour Modes for Optimum Image Rendering
TAKE THE HASSLE OUT OF BUSINESS PROJECTI
The EPSON EMP-54, EPSON EMP-73 and EPSON EMP-74 are high-performance and affordable mobile projectors for professionals on the move. Bright, quiet and easy to operate, they encourage smooth and dynamic presentations with their wealth of great features. They are stylish and compact and virtually effortless to move from place to place, thanks to a compact design and lightweight, ultra-portable build.
High Performance Features Perfect for business and educational uses alike, the EPSON EMP-73, EPSON EMP-54 and EPSON EMP-74 give very bright 2000 and 1500 ANSI lumens respectively. Featuring the newly-developed EPSON 0.7 Dream 3 LCD panels, which boast a vastly improved aperture ratio, projections are extremely bright and have unrivalled resolution. Because EPSON is a world leader in advanced imaging technology,
the EPSON EMP-54, EPSON EMP-73 and EPSON EMP-74 are expertly designed and manufactured with the highest quality components. Rugged but stylish, each of these projectors will give you enduring and consistent performance, day in and day out. Very Stylish and Virtually Silent The EPSON EMP-54, EPSON EMP-73 and EPSON EMP-74 are sleek and stylishly designed with great features inside and out. To help you give the best presentations, they keep a very low profile when
running. Thanks to the new Silencer Cooling Duct and Lamp Wattage Control, the projectors are able to switch into silent operation mode and operate at a barely audible 33dB. This helps you take the strain off your audience during long presentations and minimises any unwanted and distracting operating noise from the projector.
Dual Brightness Mode A key feature in EPSON engineering is to optimise performance. This means that the EPSON EMP-54, EPSON EMP-73 and EPSON EMP-74 are designed with different modes that fit in with the intended use and requirements for you. Together with Normal Mode, 'Silent Mode' has the advantages of quiet operation, and with the added benefit of an extra long lamp life, you can have up to 3,000 hours of quality viewing.
INTELLIGENT MEETING SET-UP AND OPERATION
Easy To Use Designed specifically to get the best out of your presentations, the EPSON EMP-54, EPSON EMP-73, EPSON EMP-74 are packed with features to take care of all the little details and let you get on with the important stuff. Theres no timely set-up procedure, just place on the table, plug in and turn on. Whats more, the projectors will detect whatever input source you are using automatically. Just plug in, switch on and they adjust the settings to suit. With an incredibly short cool down time of around 20 seconds, you are ready to present and go without any hassles. Get Connected With so many great features, its amazing the EPSON EMP-54, EPSON EMP-73 and EPSON EMP-74 are so lightweight and compact weighing just 2.9kg. They also offer great connectivity via their comprehensive interfaces. Monitor output is perfect when projecting from a long distance or need multiple screens. However, if youre very close to the screen you neednt worry either, as the EPSON EMP-54, EPSON EMP-73 and EPSON EMP-74 can handle a 60 inch screen from just 1.8m. To make things even easier, the projectors have a new card-type remote that offers great operating functions like Page Turn. This stores away inside the projector when not in use, keeping it safe and secure when youre on the move. Auto Keystone Correction This impressive technology means that no matter where your projector is placed, the projected images will automatically adjust to give you a perfectly shaped screen for optimum performance. Blackboard Projection Mode Integrated as part of an addition to the original 5 colour modes, the blackboard projection mode enables you to project on to dark surfaces that makes it very useful for the education and lecture sessions.

Dark projection surface Standard projection mode With enhanced colour mode

Features & Benefits

ENHANCED SECURITY FUNCTIONS
Users Logo Start Up Screen A simple but very effective password security feature means that when you start-up, your personalised information (logo, design or message etc) will always be displayed. Password Protected Security Function For an even higher level of security, this feature will only allow the projector to be used if a security password is correctly entered. Protect Timer Function In addition to the standard password protection, these projectors have a screen saver function. Just like your PC, after a preset time your projector will switch to a security mode, and will only display again once youve entered your password to unlock it.
Native resolution of SVGA (EPSON EMP-54) and XGA (EPSON EMP-73/EPSON EMP-74) High Bright: 2000 ANSI Lumens (EPSON EMP-54/EPSON EMP-74) and 1500 ANSI Lumens (EPSON EMP-73) Blackboard projection mode Silent Operation Mode Auto Keystone Correction Monitor Output Connection USB support to enable operation of Remote Mouse Self-storing, Card-type Remote Control with page turning included in box Protect Timer Function Enhanced Security Functions

Specifications

EPSON EMP-54 PROJECTION SYSTEM PROJECTION METHOD SPECIFICATION OF MAIN PARTS LCD Size Pixel number Native Resolution Aspect ratio Pixel Arrangement PROJECTION LENS Type Focal length Zoom ratio LAMP Type Life Optical System Screen size (Projected Distance) Keystone correction ratio BRIGHTNESS High Brightness mode Low Brightness mode Contrast Brightness Uniformity Color reproduction Sound output EFFECTIVE SCANNING FREQUENCY RANGE Pixel Clock Horizontal ADJUSTMENT FUNCTION Projector/Remote Control Tilt Angle Keystone Correction Auto Keystone Correction ANALOG RGB I/O Display Performance Native Resize Input Signal Signal type Video Signal Sync. Signal Audio Signal Input Terminal Video Audio Output Signal Signal type VIDEO I/O Display Performance Input Signal Video Standard Video signal EPSON EMP-73 EPSON EMP-74 RGB Liquid Crystal Shutter Projection System Front / Rear / Ceiling Mount

EPSON EMP-74

0.7 inches without MLA (x3) 480000 dots (800x600) x3 SVGA
0.7inches with MLA (x3) 0.7 inches without MLA (x3) 786432 dots (1024x768) x3 XGA 4:3 Stripe Manual: zoom/focus 21.3-25.6mm 1.0:1.2

97mm 240mm

EPSON EMP-54
200W UHE 3000H (Low Brightness mode) 2000H (High Brightness mode) Method
200W UHE 165W UHE 3000H (Low Brightness mode) 2000H (High Brightness mode) 1500H Dichroic Mirror Separation & Prism combine 30 to 300inch (0.9 to 10.5m) 10:ANSI lumens 1500 ANSI lumens 1500 ANSI lumens 1200 ANSI lumens 500:1 85%(Typ.) Full Colour (1677million colours) 1W Monaural 13.5MHz to 162MHz 15KHz to 92KHz
2000 ANSI lumens 1500 ANSI lumens

EPSON EMP-73

Keystone(Vertical) /Brightness /Contrast/Tint/Saturation/Sound/Input signal 0 to 10 degrees 'Vertical: -15 to +15 degrees Yes

800 x 600 dots 1280 x 1024/800 x 600/ 640 x 480 dots
1024 x 768 dots 1600 x 1200/1280 x 1024/800 x 600/640 x 480 dots
Separate signal Analog(0.7V p-p,75 ohm/Mac0.714Vp-p, 75ohm) Separate (positive&negative, bi-polarity 2-5Vpp)/Composite(positive&negative, bi-polarity 2-5Vpp)/ Sync-on-green(negative, 0.3Vpp) 500mVrms/47Kohm Mini D-sub 15pin Blue-molding x2 Mini D-sub 15pin x1 Blue-molding Stereo mini jack Not analog-RGB standard level NTSC: 550 line PAL: 550 line (Depend on observation of the multi burst pattern) Mini D-sub 15pin Blue-molding x2
Audio signal INPUT TERMINAL Video
NTSC/NTSC4.43/PAL/M-PAL/N-PAL/PAL60/SECAM Composite Video(1.0Vpp/Sync.negative, 75 ohm)/S-Video(Luminous0.714Vpp, Chrominous 0.286Vpp, 75 ohm)/ Component Video(Analog Y level 0.7V 75 ohm/Cr Cb level +/-0.35V 75 ohm/sync.negative 0.3V or 3-state+/0.3V on Y)/Video-RGB(0.7V p-p,75 ohm/Mac 0.714Vpp,75 ohm) 500mVrms/47Kohm Composite Video: RCA (Yellow) x 1 S-Video: Mini DIN Component Video: Mini D-sub 15pin Blue-molding (in common with Analog RGB connector) Video-RGB: Mini D-sub 15pin Blue-molding (in common with Analog RGB connector) RCA (White/Red) x 2
EPSON (UK) Ltd Campus 100, Maylands Avenue, Hemel Hempstead, Hertfordshire HP2 7TJ United Kingdom Telephone: +44 (0) Fax: +44 (0) E-mail: info@epson.co.uk Home Page: www.epson.co.uk For product support, call the EPSON Customer Support Hotline on 766 For Ireland, call 9016 (Stylus products) 9015 (non Stylus products)
Audio CONTROL I/O USB I/O I/O terminal Serial I/O I/O terminal I/O signal Operating Temperature Cool-down period Start-up period Power Supply Voltage Power Consumption DIMENSION Exclude Projection lens & Feet Maximum dimension Weight Fan Noise High Brightness mode Low Brightness mode WARRANTY
Component Video: Mini D-sub 15pin Blue-molding (in common with Analog RGB connector) x 2 Video-RGB: Mini D-sub 15pin Blue-molding (in common with Analog RGB connector) x 2 Stereo mini jack
USB connector series B x1
USB connector series A x 1 USB connector series B x 1
100-240V 3.2-1.6A 50/60Hz
Mini D-sub 9pin x1 RS-232C 5C to 35 C <41F to 95 F> about 20 seconds about 40 seconds 100-120V / 200-240V 10%, 50/60Hz AC 100-240V 2.6-1.3A 50/60Hz 100-240V 3.2-1.6A 50/60Hz 240(D) x 315(W) x 87(H) mm 240(D) x 315(W) x 97(H) mm Approx. 6.4lbs / 2.9Kg

36dB 33dB

EMP547374 - 1GB
UK - 3 year next day on site repair or replace Ireland - 3 years next day on site repair or loan
EPSON is a registered trademark SEIKO EPSON Corporation. All other product names and other company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners. Errors and omissions excepted, all specifications are subject to change without notice.

74/54 Quick Reference Guide English-01-04

Useful Functions

Colour mode The following six preset types of colour mode can be selected by selection pressing [Color Mode] on the remote control.

Dynamic Living Room

A/V Mute Automatic Setup

Presentation sRGB

Theatre Blackboard
User's Guide "Selecting the Projection Quality (Colour Mode Selection)" User's Guide "A/V Mute" User's Guide "Adjusting Computer Images and RGB Video Images"

Quick Reference Guide

Be sure to read the accompanying User's Guide before using the projector.
Playback of images and sound can be momentarily paused and then resumed each time [A/V Mute] on the remote control is pressed. Identifies signals from a connected computer or RGB video source, and automatically adjusts these signals so that the optimum images can be obtained.

WARNING

Do not look into the lens while the projector's power is turned on.

Adjusting the Image Size

User's Guide "Screen Size and Projection Distance"
The size of the projected image is basically determined by the distance from the lens to the screen. The actual values will vary depending on projection conditions and the zoom setting. The values should be used as a guide for setting up the projector.
Distance to screen ("W" (wide) to "T" (tele)) cm (30.134.4 ft.) (20.022.9) (10.011.4) (8.09.1) (5.96.8) (4.95.7) (3.94.5) (2.93.4) Screen size

Troubleshooting

Using the help function
User's Guide "Troubleshooting"
on the projector's control panel.
Select the item to view. Press [ ] (or the [ ] and [ ] on the remote control). Accept the selection. Press [Enter] on the control panel or on the remote control. The help contents will then be displayed. To clear the display, press on the control panel.

300"

(410 300) 80 (200 150) 60 (160 120) 40 50
(100 76) Centre of lens 7 (2.7) 8 (3.3) 11 (4.4) 14 (5.5) 28 (10.9) 42 cm (16.4 in.) (120 90)

Checking the indicators

These indicators alert you to problems with projector operation. The following tables show what the indicators mean and how to remedy problems that they indicate.
Refer to "Problems Solving" in the User's Guide for further details.

20 cm (7.9 in.)*

(61 46)

(81 61)

(Warning) indicator
Status Problem and remedy

Flashing

(2.2) Distance from centre (1.6) of lens to bottom edge of screen
* When installing against a wall, leave about 20 cm (7.9 in.) between the projector and the wall.

Power indicator

Status

Problem and remedy

High temperature inside projector (overheating) The lamp will turn off automatically and projection will stop. Wait for about 5 minutes, unplug the power cable and then plug it back in again. Then press to turn the projector back on. Lamp problem Remove the lamp and check if it is broken. If the lamp is not broken, reinsert it. If the lamp is broken replace it with a new lamp, or contact your local dealer for further advice. *1 Internal problem Stop using the projector and have it serviced it for service. *2 High-speed cooling in progress. If the temperature rises too high again, projection will stop automatically. Check that the air filter and air exhaust vent are clear, and that the internal room temperature is not too high.

Connecting to a Computer

User's Guide "Connecting to a Computer"
Turn off the power for both the projector and the computer before connecting them. To [Computer1/Component Video1] or [Computer2/Component Video2] port (blue)

Orange

Standby condition The power cable should only be disconnected in this condition. Projection starts when you press. Cool-down in progress The projector changes to standby (indicator lights orange) after about 20 seconds. Projection in progress Warm-up in progress After warm-up finishes, projection starts when an image signal is input.

404654400E

Red (0.5-second intervals)
Red (1-second intervals) Orange

To computer monitor port

Computer cable (accessory)
Printed in Japan 03.08-6.85A(C05)
*1 Contact your dealer for a spare lamp. *2 For repairs, contact your dealer or the nearest address provided in the "International Warranty Conditions" section in the Safety Instructions/World-Wide Warranty Terms booklet.

The computer cable supplied with the projector may not match the monitor port on some computers. In such cases, you will need to purchase a separate adapter.
74/54 Quick Reference Guide English-02-03
Connecting to a Video Source
User's Guide "Connecting to a Video Source"

Adjustments

Adjusting the image angle
While pressing the foot adjust buttons on either side, lift up the front of the projector. When the desired angle is obtained, release the foot adjust buttons.
User's Guide "Adjusting the Screen Image"
Turn off the power for both the projector and the video source before connecting them. [S-Video] port [Video] port (yellow) When connecting to a video source with an S-Video output port To S-Video output port S-Video cable (commercially-available) [Audio2] port To video output port To audio output port yellow white yellow
Adjusting the image size and focus
Fine adjustments to image size Turn the zoom ring to adjust the image size. Turn to the "W" side to increase the image size, and turn to the "T" side to reduce the image size.
Front adjustable feet red A/V cable (accessory) When connecting to a video source with a video output port

Foot adjust button

* To output sound from the video equipment through the projector's built-in speaker, connect the video equipment and the projector with the accessory A/V cable. If connecting a component video source (such as a DVD player), you can use the optional component video cable to connect the source to the Computer/Component Video port at the rear of the projector. User's Guide "Turning On the Projector" Power indicator
When the projector is tilted, it will cause keystone distortion to appear in the image, but this distortion can be corrected using the automatic keystone correction function as long as the vertical angle of tilt is within a range of approximately 15. If you would like to make further minor adjustments to the effects of automatic keystone correction, use [keystone] on the projector's control panel.
Adjusting the focus Turn the focus ring to adjust the focus.
Preparation before Projecting 3 4
Remove the lens cover. Insert the projector's power cable into the projector. Insert the power cable into an earthed electrical outlet. The Power indicator will light orange. Turn on the power for the signal input source. For video equipment, press [Play] to start playback. Press to turn on the projector's power. A beep will sound to indicate that the projector is starting up. The Power indicator will flash green, and projection will then start (warm-up in progress). The Password Protect setting may cause the password entry screen to be displayed each time the power is turned on. If this happens, enter the password. User's Guide "Preventing theft (Password Protect)"

The following adjustments can also be made. Automatic setup (only when computer or RGB video signals are being projected).
User's Guide "Adjusting Computer Images and RGB Video Images" When projecting computer images, the input signals are detected automatically and adjusted
If no images are projected, change the input signal.
so that the optimum images are projected. If the results of automatic adjustment are not satisfactory, individual settings can also be adjusted manually using the menus. Other adjustments User's Guide "Using the Configuration Menu Functions" Press [Menu] on the remote control to display the configuration menu. You can use the configuration menu functions to adjust setting such as brightness, contrast and colour.
Turning the Projector Off 1

Projector Remote control

User's Guide "Turning Off the Projector" Power indicator
Operating problems may occur if the power cable is disconnected while the Power indicator is flashing orange.
Turn off the power for all sources connected to the projector. Press twice to turn off the power. The Power indicator will flash orange (cool-down in progress/about 20 seconds). If a message prompting you to clean or replace the air filter appears, follow the instructions in the message. Check that the Power indicator lights orange, and then disconnect the power cable from the electrical outlet.
If connecting to a computer with a built-in monitor, or to a laptop computer, you may need to change the output destination using the buttons or setting menus on the computer or laptop computer.
User's Guide "Turning On the Power and Projecting Images"