Epson EMP-700 Home Cinema Projector, size: 1.6 MB
Black, Image Size: 23.6 in - 299 in, Metal halide 120 Watt, 2 years warranty
The EMP-700 is a "next generation" ultra portable projector featuring true XGA resolution. It combines high brightness and excellent image quality with a new ultra-compact design. Incorporating many features only previously available on high-end projectors, the EMP-700 combines new miniaturized technology in an ultra small unit. New miniaturized optics, circuit board and a newly developed small size 120W UHP lamp enables the EMP-700 to produce high bright 800 ANSI lumens. The newly dev... Read more
[ Report abuse or wrong photo | Share your Epson EMP-700 photo ]
Epson EMP TW 700 GT Prologue auf Ps3 Slim / 140"
User reviews and opinions
|mortdk||4:19am on Friday, September 24th, 2010|
|This projector is excellent, I have only had it for a week but the image is perfect.|
|mlanetto||11:26pm on Monday, April 19th, 2010|
|I am stunned by this projector, I have it 6 meters back in a lounge room right near the corner of a room with poor light control. I am stunned by this projector, I have it 6 meters back in a lounge room right near the corner of a room with poor light control.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Please read the following important information about your projector.
Important Safety Information
Warning: Never look into the projector lens when the lamp is switched on as the bright light can damage your eyes. Never let children look into the lens when it is on. Warning: Never open any covers on the projector except the lamp and filter covers. Dangerous electrical voltages inside the projector can cause severe injury. Except as specifically directed in this Owners Manual, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. Warning: Keep the plastic bags for the projector, accessories and optional parts out of the reach of children. Children covering their heads with bags may result in death by suffocation. Be particularly careful around small children. Caution: When you replace the lamp, never touch the new bulb with your bare hands. The invisible residue left by the oil on your hands may be shorten the bulb life. Use a cloth or gloves to handle the new bulb.
operation panel operation indicator remote control receiver zoom ring focus ring
speaker front foot foot adjust lever
Function Turns the projector on or off. Displays the Help menu. Switches the image source in order of computer S-video composite video. If there is no S-video input, the switch toggles between computer and composite video. Selects a menu option when the Help menu is displayed. Scrolls up and down, or right and left when the Help menu is displayed.
Power Help Source
Keystone +/- Adjusts a trapezoid distorted image to normal. Select
Power Freeze A/V Mute E-Zoom
R/C ON OFF
Button Freeze A/V Mute E-Zoom Function Keeps the current computer or video image on the screen. Turns off the audio and video output of the projector. To turn on the audio and video output, press either the A/V mute button or Esc button again. Pressing the right side of the button enlarges the image, pressing the left side of the button reduces the image. To display a portion of the enlarged image which is outside of the display area, press the Enter button to scroll the image. Turns the projector on or off. Use the enter button to navigate the menus or use the remote as a mouse pointer when the projector is connected to the computer with the computer cable and the mouse cable. You can also select a menu option by pressing the center of this button (Enter). If you press the Enter when a menu or help is displayed, you access the next menu or screen. When the image source is a computer, the Enter button acts as the mouse left click. Lights up all buttons on the remote control for 10 seconds. Terminates the current function. If you press the Esc button when a menu or help is displayed, you go back to the previous screen or menu. When the image source is a computer, the Esc button acts as the mouse right click. Displays or hides the menu. Displays the Help menu. Switches to the computer image from Computer. Switches to the video image from S-Video. Switches to the image from Video. Optimizes the computer image. Switches between the Window display and Resizing display. Displays a subscreen on the main display. To display the subscreen, press the PinP button once. To hide the subscreen, press it again. To set the subscreen being displayed, press in the following order : [Menu] [Setting] [P in P]. The default settings are as follows; Subscreen size:1/9 division Main screen input source:Computer Subscreen input source:Video To change the subscreen position, press the Enter button. The subscreen will move to the selected direction. Adjusts the volume.
Audio In Audio Out
Computer Out Audio S-Video R Audio L In
USB Mouse Power Inlet
Connecting to a PC Desktop Computer
To connect the projector to your PC desktop computer, you need to: Connect the computer cable Connect the audio cable (if youll be projecting with audio) Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are on.
Note: Computer configurations vary. See your computer manual for the location of the ports needed to connect your projector.
Connecting the Computer and Monitor Cables
Refer to this illustration while following the steps below.
1. If you will be viewing the video on your computer monitor as well as the projector screen, disconnect the monitor cable from the video port on the back of your computer. 2. Connect one end of the computer cable to the projectors Computer port.
3. Connect the other end of the computer cable to the computers video port. 4. Tighten the screws on all connectors.
Connecting the Mouse Cables
If you want to use the remote control as a mouse, you need to connect the PS/2 mouse cable or USB mouse cable. Refer to this illustration while following the steps below.
USB mouse port
Mouse/Com port PS/2 mouse cable
USB mouse cable
1. Connect the 9-pin end of the PS/2 mouse cable or, the USB mouse cable to the Mouse/Com or USB mouse port on the projector.
2. Disconnect your mouse from the mouse port on the back of your computer and replace it with the other end of the PS/2 mouse cable or USB mouse cable. (Your computers mouse will be disabled while you are using the remote control as a mouse.)
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio cable to the Audio In jack on the projector.
Audio n jack
2. Connect the other end of the audio cable to the speaker or audio out port on the computers sound card.
Connecting to a PC Laptop Computer
To connect the projector to your PC laptop computer, you need to: Connect the computer cable Connect the mouse cable (if you want to use the remote control as a mouse) Connect the audio cable (if youll be projecting with audio) Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are on.
Note: After you turn on the projector and computer, youll need to choose Mirroring in the Display Control Panel if you set up your configuration to display on the LCD screen as well as the projector screen.
Connecting to a Video Source
You can connect a VCR, a camcorder, a laser disc player, DVD player, or any other compatible video image source to your projector. The projector can receive composite video or S-Video. Your equipment has composite video if your video source has a one-pin RCA video jack. Your equipment has S-Video if your video source has a four-pin (mini-DIN) video jack.
Note: The projector is not compatible with a cable TV-style F connector.
You can connect the projector to an S-Video source and a composite video source at the same time. The projector supports NTSC, PAL, and SECAM video formats, and automatically detects and identifies the video format. However, you can specify that a single broadcast format be detected. (See Chapter 3.) Note that the projector will then be able to detect only one type of video signal. The type of cable you use to connect the video source to the projector depends on whether you have composite video or S-Video. For composite video, use the RCA audio and RCA video cable supplied with the projector. For S-Video, use the S-Video cable supplied with your video device or obtain one from your computer or video equipment dealer.
S-Video 4-pin, mini-DIN
To connect a video source to the projector: 1. Turn off the projector and video source if they are on.
2. If your video source uses a small, round, one-prong composite (RCA) video connector, youll need the RCA video cable that comes with the projector. If your video source uses a large, round, four-prong S-Video connector, you will need to purchase the appropriate cable or use the cable that came with your video source. 3. For Composite Video, connect the yellow RCA plug on one end of the RCA video cable to the projectors Video jack. Connect the other yellow RCA plug to the video-out jack of your video source.
RCA audio cable
RCA video cable
4. Connect the RCA audio cable to the Audio jacks of the projector: insert the white plug into the L jack and the red plug into the R jack. Connect the plug at the other end of the RCA audio cable to the audio output jacks of the video source. 5. For S-Video, insert one end of an S-Video cable into the projectors S-Video connector. Insert the other end into the S-video out jack of your video source.
6. Connect the RCA audio cable to the Audio jacks of the projector: insert the white plug into the L jack and the red plug into the R jack. Connect the plug at the other end of the RCA audio cable to the audio output jack of the video source.
To use the remote control, point it towards the remote control receivers located at the front and back of the projector. To be able to use the remote control as a cordless mouse, connect the mouse cable to the projector and your computer. You can use the remote control up to 10 metres (30 feet) from the projector.
Note: The projector may not respond to remote control commands in these conditions: ambient light is too bright; a certain type of fluorescent light is present; a strong light source (such as direct sunlight) shines into the infrared receiver; or other equipment emitting infrared energy is present (such as a radiant room heater). Correct these conditions to use the remote control or control the projector from a computer.
This table summarizes the functions on the remote control.
Button Freeze A/V Mute Function Keeps the current computer or video image on the screen. Turns off the audio and video output of the projector. To turn on the audio and video output, press either the A/V mute button or Esc button again. Pressing the right side of the button enlarges the image, pressing the left side of the button reduces the image. To display a portion of the enlarged image which is outside of the display area, press the Enter button to scroll the image. Turns the projector on or off. Use to display special effects that have been assigned in the Effect menu. Use the enter button to navigate the menus or use the remote as a mouse pointer when the projector is connected to the computer with the computer cable and the mouse cable. You can also select a menu option by pressing the center of this button (Enter). If you press the Enter when a menu or help is displayed, you access the next menu or screen. When the image source is a computer, the Enter button acts as the mouse left click. Lights up all buttons on the remote control for 10 seconds. Terminates the current function. If you press the Esc button when a menu or help is displayed, you go back to the previous screen or menu. When the image source is a computer, the Esc button acts as the mouse right click. Displays or hides the menu. Displays the Help menu.
Power Effect buttons Enter
Button Comp S-Video Video Auto Resize P in P
Function Switches to the computer image from Computer. Switches to the video image from S-Video. Switches to the image from Video. Optimizes the computer image. Switches between the Window display and Resizing display. Displays a subscreen on the main display. To display the subscreen, press the PinP button once. To hide the subscreen, press it again. To set the subscreen being displayed, press in the following order : [Menu] [Setting] [P in P]. The default settings are as follows; Subscreen size:1/9 division Main screen input source:Computer Subscreen input source:Video To change the subscreen position, press the Enter button. The subscreen will move to the selected direction. Adjusts the volume.
Using the Operation Panel
You can use the operation panel to control the projector instead of the remote control. However, you can program and access the custom features only using the remote control. The following table summarizes the functions on the operation panel.
Button Power Help Source Function Turns the projector on or off. Displays the Help menu. Switches the image source in order of computer Svideo composite video. If there is no S-video input, the switch toggles between computer and composite video. Selects a menu option when the Help menu is displayed. Adjusts a trapezoid distorted image to normal. Scrolls up and down, or right and left when the Help menu is displayed.
Enter Keystone +/Select
Projector Status Indicators
The power and lamp indicators at the top of the projector tell you its operating status.
Operation Indicator Lamp Indicator Temperature Indicator
Caution: A red indicator warns you if a serious problem occurs. See Chapter 5, Troubleshooting, for what to do if a warning light comes on.
Displays machine condition.
Color Orange Green Green Orange Status Lit Flashing Lit Flashing Meaning Sleep mode. (The projector is plugged in, but not projecting.) The projector is warming up. Power and projection lamp are on. Projection lamp is off, and the projector is cooling down for one minute. Cooling time depends on the air temperature. During the cooling, any other operations cannot be executed. There is an internal projector problem and the power to the projector has been cut off. The projector is not on.
Displays lamp condition. This indicator is off when the projector is in a normal condition.
Color Red Orange Status Off Lit Flashing Meaning Lamp is functioning normally. The lamp needs to be replaced. Projection lamp has reached the time to replace and will no longer project images. Replace the projection lamp with a new one. There is a problem with the projection lamp, lamp power supply, lamp fuse, or a circuit malfunctioned in the projector.
Displays the internal temperature condition. This indicator is off when the projector is in a normal condition.
Color Orange Red Red Status Off Flashing Lit Flashing Meaning The projector is functioning normally. The projector is too hot. The projector has turned off automatically because of over heating. There is a problem with the cooling fan or temperature sensor.
Menu item Color
Description Adjusts the color balance (Red:Green:Blue) of the input source. Select this item by pressing the Enter button. The projector will enter color adjustment mode. Use the Enter button to select a color. Next, use the Enter button to adjust the selected color. Increase the color setting for more intense color, or decrease the setting for less intense color. Adjusts the screen sharpness. Increase the sharpness for a sharper image, or decrease it for a less sharp image. Set to On to have the computer automatically optimize the image for projection. Adjusts the projected imagery for natural coloration. Returns all menu items to their initial factory defaults. Select this item and then press the Enter button to display the confirmation screen. Next, select Yes and then press the Enter button to reset the menu. If you change your mind, select No and then press the Enter button to clear the confirmation screen without changing any settings.
Auto Setup Gamma Reset
Video Menu (Image source = Video)
The Video menu lets you make adjustments to the projected image. The following options are available when the image source is Video.
Note: The projectors image source must be set to Video, and the video source (such as a VCR or camcorder) must be connected and operating for you to access these menu options (for example, the projector must actually be projecting an image from a video tape, if youre using a VCR).
Menu item Position Description Select this item by pressing the Enter button to enter the screen position adjustment mode. Then use the Enter button to move the screen position in the corresponding direction. When you finish making adjustment, press the Esc button to return to the Video submenu. Lightens or darkens the overall image. Increase brightness to lighten an image, or decrease it to darken the image. Adjusts the difference between light and dark areas. Increase the contrast to make light areas lighter and dark areas darker. Decrease it to minimize the difference between light and dark areas. Adjusts color density. Increase the setting for darker and more opaque colors. Decrease it for lighter and less opaque colors. Adjusts the red-green color balance of the screen. Increase tint to add more green, (NTSC only) or decrease it to add more red. This setting only works with NTSC video signals. Adjusts the screen sharpness. Increase the sharpness to make screen images more sharp, or decrease it to make the images less sharp. Adjusts the projected imagery for natural coloration.
User's Logo Menu
The Users Logo menu lets you display a custom logo on the screen. Creating a user logo requires two steps: Storing a user logo Assigning the logo to the A/V Mute button
Storing a User Logo
Follow these steps to capture and store a logo. 1. Display the image(with the projector) you wish to use as a logo. 2. Press the Menu button to open the Menu window. 3. Select the Users Logo menu option by pressing the pointer button. Then press the Enter button to display the Users Logo Setting window. 4. The message, Do you use the present image as a user logo? appears on the screen. Choose Yes or No by pressing left or right of the Enter button. Then press Enter button. 5. When you choose Yes in the step 4, a selection box will appear over the image. To select the portion of the image you wish to use as the logo, use the Enter button. Once you have selected the desired area, press the Enter button. 6. The message Do you use this image? appears on the screen. Select Yes and press the Enter button. If you want to change the position, select No. 7. Next, the Zoom rate setting window appears on the screen. Select a rate using the arrow buttons, then press the Enter button. 8. The message Do you save this user logo? appears on the screen. Select Yes and press the Enter button. If you dont want to save the logo, select No.
Note: Saving the logo may take a moment. Do not use the projector or other sources (computer, video, speaker, etc.) while the logo is being saved.
9. When the message Saving the user logo is completed appears on the screen, press the Menu or Enter button to display the Main Menu.
Assigning the Logo to the A/V Mute Button
Follow these steps to assign the logo to the A/V Mute button: 1. Press the Menu button to open the Menu window. 2. Select the Setting menu and press the Enter button. 3. Select the Blank option (A/V Mute), then highlight User Logo. 4. Press the Menu button twice. Now you can press the A/V Mute button on the remote control to display the user logo.
Reset All Menu
Selecting the Reset All menu option resets the settings in all menus to their factory defaults. It does not change or delete any user logo you may have stored. You will be prompted to confirm the reset action. Select Yes or No, then press the Enter button to reset all the settings.
The Advanced menu enables you to set various projector options.
Menu item Language Description Selects the menu language from Japanese, English, German, French, Italian, Spanish, Portuguese, Chinese and Korean. Displays the user logo during the warm-up after the projector is turned on. Adjusts the whiteness and blackness of the screen. Increasing the values emphasizes the whiteness and blackness. Decreasing the values weakens the whiteness and blackness. Mirrors the projected image so it looks correct when youre projecting from behind onto a translucent screen. Selecting ON turns mirroring on, while OFF turns it off (for a normal image). Flips the projected image so it looks correct when youre hanging the projector upside-down from the ceiling. Selecting ON turns this feature on, while OFF turns it off (for a normal image). Returns all menu items to their initial factory defaults. Select this item and then press the Enter button to display the confirmation screen. Next, select Yes and then press the Enter button to reset the menu. If you change your mind, select No and then press the Enter button to clear the confirmation screen without changing any settings.
Startup Screen Color Temp.
The About menu displays the following information about your projector. Image source = Computer or Component Video
Menu item Lamp Description Displays the number of hours the current lamp has been used. The lamp light turns red when the projector lamp needs to be replaced. When this happens, replace the projector lamp with a new one as soon as possible. Displays the horizontal and vertical frequency of the computer. Displays the sync polarity of the computer. Displays the sync mode of the computer. Displays the output resolution of the computer video output. Displays the refresh rate of the computer video output.
Frequency SYNC Polarity SYNC Mode Resolution Refresh Rate
Image source = Video
Menu item Lamp Description Displays the number of hours the current lamp has been used. The lamp light turns red when the projector lamp needs to be replaced. When this happens, replace the projector lamp with a new one as soon as possible. Displays the input image signal mode.
Replacing the Lamp
Replace the lamp when: The projected image gets darker or starts to deteriorate. The projection lamp indicator is flashing orange. The message LAMP REPLACE appears on the screen when the projector lamp comes on.
Note: To keep the initial brightness and image quality, replace the lamp as soon as possible when the message appears on the screen. The replacement message is set to being displayed at about 2000 hours of use. Contact your local EPSON dealer for a spare lamp. Request part number ELPLP10B (EMP-700/500) or ELPLP10S (EMP-710). Warning: Let the lamp cool before replacing it. Also, do not touch the glass portion of the lamp assembly. Touching the glass portion of the lamp will result in premature lamp failure.
1. Turn off the power and allow the unit to cool down, then remove the power cord. The amount of time needed to cool down will depend on the ambient temperature.
2. Remove the lamp cover after the unit is cool. It will normally take about an hour to completely cool down. Loosen a lamp cover-mounting screw with the screwdriver provided with the spare lamp, then remove.
3. Loosen two mounting screws for the lamp with the same screwdriver, and pull out the lamp using the handle.
4. Mount new lamp. Check that the lamp orientation is correct, and then press it into place securely. Tighten the mounting screws for the lamp with the screwdriver. 5. Remount the lamp cover. Tighten the lamp cover screw with the screwdriver.
Replacing the Lamp 59
This chapter describes the problems indicated by the warning
lights and provides information on how to solve problems with the projector. It is divided into the following sections: Problems with the projector. See this section if the projector is not working and to find out what the warning lights are indicating. Problems with the screen image. See this section if you cannot project an image or if the screen image is poor. If you have a problem, refer to the appropriate section and follow all suggestions that apply to your problem. If none of the suggested solutions solves the problem, call your dealer or EPSON Service Centre.
Problems with the Projector
If you have problems with the projector, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this does not solve the problem, check the warning lights at the top of the projector. These lights alert you to problems with projector operation.
See the following pages for information on what to do when you see these warning lights or encounter other specific problems with the projector. u The operation indicator is flashing orange and you cannot turn on the projector. The lamp is cooling down. Wait until the light turns off and then turn on the projector. u The operation indicator does not come on. Turn off the projector, check that the power cable is connected securely both at the power outlet and the projector, and press the Power button again. u Projected images get darker or start to deteriorate, or the lamp indicator is red. Replace the projector lamp as described on page 58.
u The temperature indicator is red. The projector is overheating, which turns the lamp off automatically. Let the projector cool for a few minutes, then turn it back on. Make sure nothing is blocking the ventilation vents. The air filter may be clogged. Clean it as described on page 57 in Chapter 4 and then let the projector cool for a while. If the projector continues to overheat after you clean the air filter, the problem may be caused by damage to the cooling fan or internal circuits. Contact a qualified service person.
Warning: Do not attempt to service this product yourself except as specifically explained in this Users Guide.
Problems with the Image or Sound
u An image does not appear on the screen. Check that the power light is on and the lens cover is off. Also make sure the cables are installed correctly, as described in Chapter 1. The correct image source may not be selected. Press the Source button on the remote control or the Source button on the appropriate input operation panel to choose another image source. u Only part of the computer image is displayed. If the computers output resolution setting is higher than (EMP-710/700) or 800 x 600 (EMP-500), the projector resizes the image. If the computer output is not compatible with this resizing, choose a different display setting on the computer. For supported display settings, see Supported Monitor Displays on page 69, 70. You also may need to modify existing presentation files if you created them for a different resolution. See your software manual for specific information. u The message NO SIGNAL is displayed. An image source not connected to the projector is selected, the signal is not being output from the computer, or the signal is not reaching the projector. Make sure the connectors are securely attached to both the projector and the image source. Then check that the image source is selected correctly. When NO SIGNAL is displayed, you cannot access the Video (computer/video) menu.
u A blank screen is displayed. The computer signal cannot be interpreted by the projector. Verify the display format (see page 69, 70). When you see a blank screen, you cannot access the projector menus. u The image or parts of the image are blurred or not in focus. Adjust the Brightness and Contrast settings on the Video menu. If youre viewing a computer image, also try adjusting the Tracking and Sync buttons on the projectors operation panel. There may be dirt or smears on the lens. Clean the lens as described in Chapter 4, Maintenance. u The colors of the image are not right. The color balance may be incorrect. If youre displaying a computer image, adjust the red, green, and blue settings in the Video menu. If youre displaying video, adjust the Color and Tint (NTSC only) settings on the Video menu. u There is no sound. First check that the volume setting is not turned all the way down and that the RCA audio cable is securely attached to both the projector and the audio source. Also, make sure that the Mute button is off. The wrong source is selected. Press either the Computer or Video button on the remote control or Source button on the operation panel to select the proper source.
General Type of display Poly-silicon TFT Size of liquid crystal panels 0.9 inches (22.9 mm) Resolution
1024 (horizontal) x 768 (vertical) pixels (EMP-710/700) 800 (horizontal) x 600 (vertical) pixels (EMP-500)
Projection distance Remote control range Internal speaker system Optical aspect ratio Zoom ratio
26-300 inch (1.1-13.8 meters) 32.8 feet (10 meters) 1W Monaural 4 : 3 (horizontal : vertical) 1:1.2
Projector Lamp Type Power Part number UHE Lamp (Ultra High Efficiency Lamp) 120 W ELPLP10S (EMP-710) ELPLP10B (EMP-700/500)
Mechanical Height Width Depth Weight 7.4 inches (87 mm) Maximum dimension 19.8 inches (267 mm) Maximum dimension 12 inches (213 mm) Maximum dimension 5.8 lb (2.6 kg)
Electrical Voltage Rated frequency Power supply 100 - 120 VAC and 200 - 240 VAC 10% 50/60 Hz 100 - 120 VAC, 1.9 A, 50/60 Hz 200 - 240 VAC, 1.0 A, 50/60 Hz
Environmental Temperature Operation: 41 - 95 F (5 - 35 C), non-condensing Storage: 14 - 140 F (-10 - 60 C), non-condensing Humidity Operation: 20 - 80% RH, non-condensing Storage: 10 - 90% RH, non-condensing
Supported Monitor Displays
The projector displays images at a resolution of 1024 x 768 (EMP-710/700) or 800 x 600 (EMP-500) pixels. To display a higher resolution image, the projector compresses it to 1024 x 768 (EMP-710/700) or 800 x 600 (EMP-500). The following table lists the display formats supported by the projector:
A: Resize B: Native Mode ACTIVE H VGACGA VGAEGA NEC400 VGA60 VGA72 VGA75 VGA85 SVGA56 SVGA60 SVGA72 SVGA75 SVGA85 XGA43i XGA60 XGA70 XGA75 XGA85 SXGA1_70 SXGA1_75 SXGA1_85 SXGA2-60 SXGA2-1280 V H(KHz) 31.46 31.46 24.83 31.469 37.861 37.5 48.269 35.156 37.879 48.077 46.875 53.674 35.522 48.363 56.476 60.023 68.677 63.851 67.5 77.75 FREQUENCY V(Hz) 56.65 59.94 72.85.008 56.25 60.317 72.85.061 86.958 60.004 70.069 75.029 84.997 70.84.75 MODEL
Pixel(MHz) EMP-710/ EMP-25.175 25.175 21.053 25.175 31.5 31.50 49.5 56.25 44.75 78.75 94.5 94.121.126 A/B A/B A/B A/B A/B A/B A/B A/B A/B A/B A/B A/B B B B B B A A A A A A/B A/B A/B A/B A/B A/B A/B B B B B B A A A A A A A A A A
Serial. A type of communication interface that transmits data over a single wire.
Audio cable 9 Audio In jack 9 Audio Menu 48 Audio Out jack 25
Image 64 Installation x
Mac mouse cable 2, 15 Macintosh desktop adapter 13, 17 Maintenance x Mouse/Com port 8, 11, 15
Cleaning the Air Filter 57 Color 47 Contrast 73 cooling 62
operation indicator 28 operation panel 28 Optional Accessories ix
Effect Menu 49 External Speaker 1, 25
PA System 1, 25 PAL 73
pin assignments 71 Power cord 2 Projector ix PS/2 mouse cable 2, 8
video-out cable 17 Volume 48
wireless mouse 1 World Wide Web xiii
RCA audio cable 23 RCA video cable 23 Resolution 64, 73 RGB 73
SECAM 73 Serial 74 Setting Menu 49 Sound 64 stereo audio cable 25 S-Video 73 S-Video cable 24 S-Video connector 24
Technical Specifications x, 67 Tone 48 Troubleshooting x, 61
USB mouse cable 2 User's Logo Menu 50
Video Source 22
World-Wide Warranty Terms
The EPSON Multi-Media Projector you purchased includes Epsons World-Wide Warranty, which allows you to obtain repair service for your product outside the country where you purchased it in over 45 countries in the world. Please note that the terms stated in the warranty card which accompanied your product, and not these world-wide terms, will apply to service sought in the country or countries covered by the card. This warranty service is limited to the following countries. <EUROPE> AUSTRIA, BELGIUM, BULGARIA, CROATIA, CYPRUS, CZECH, DENMARK, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LUXEMBURG, MACEDONIA, NETHERLANDS, NORWAY, PORTUGAL, POLAND, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, SWITZERLAND, TURKEY, UNITED KINGDOM and YUGOSLAVIA <NORTH, CENTRAL AMERICA & CARIBBEAN ISLANDS> CANADA, COSTA RICA, MEXICO and U. S. A. <SOUTH AMERICA> ARGENTINA, BRAZIL, CHILE, COLOMBIA, PERU and VENEZUELA <ASIA & OCEANIA> AUSTRALIA, HONG KONG, JAPAN, KOREA, MALAYSIA, SINGAPORE and TAIWAN This warranty service is subject to the following terms and conditions. 1) To obtain warranty service, you must present proof of the date you purchased your product, by showing the servicer either your purchase receipt or your warranty card (if the purchase date is shown on the card).
2) This warranty service will be implemented based on the warranty term and conditions that have been established by EPSON (or its authorized servicer) in the country where service is sought. However, Epson guarantees at least these service terms: - The period of warranty is 12 months from the day of purchase. - The warranty will cover at least the cost of parts and labor. - Epson cannot guarantee that the servicer will be able to provide you with a replacement product while your product is being repaired. 3) This warranty service will not apply in to the following cases: a.Failures or defects in consumables such as Lamps or optional equipment b.In case the product was damaged due to inappropriate use or failure to properly use in accordance with details of this manual, or transportation c.In case the product was repaired or modified by any party other than EPSON or an Epson-authorized servicer d.Problems caused by optional equipment or consumables, other than original EPSON product or product of the same quality
HONGKONG : EPSON Technical Support Centre (Information Centre) Rooms 4706-4710, China Resources Building, 26 Harbour Road, Wan Chai, HONG KONG Tech. Hot Line: (852) Fax: (852) Web Address: http://www.epson.com.hk JAPAN : SEIKO EPSON CORPORATION SHIMAUCHI PLANT VD Customer Support Group: 4897 Shimauchi, Matsumoto-shi, Nagano-ken, 390-8640 JAPAN Tel: 0263-48-5438 Fax: 0263-48-5680 KOREA : EPSON KOREA CO., LTD 17F HANSOL Bldg., 736-1, Yaoksam-dong Kangnam-gu, Seoul, 135-080, KOREA Tel: 2-553-3515 Fax: 2-5584271 http://www.epson.co.kr
TAIWAN : EPSON Taiwan Technology & Trading Ltd. 10F, No.287, Nanking East Road, Section 3, Taipei, Taiwan, R. O. C. Tel: 02-2717-7360 ext. 327 Fax: 02-2713-2155 http://www.epson.com.tw
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909 Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Representative : EPSON AMERICA, INC. Address : 3840 Kilroy Airport Way MS : 6-43 Long Beach, CA90806-2469 Telephone : (562) 290-5254 Manufacturer Address : SEIKO EPSON CORPORATION : 3-5, Owa 3-Chome, Suwa-shi, Nagano-ken 3928502 Japan EPSON LCD Projector Class B personal computers and peripherals ELP-710/700/500
Trade Name : Type of Product : Type of Device : Model :
We hereby declare that the equipment specified above conforms to the above Standards.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. ncrease the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. For Canadian Users This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Le prsent appareil numrique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de Classe B prescrites dans le rglement sur le brouillage radiolectrique dict par le Ministre des Communications du Canada.
THE FEATURE-RICH, 800 LUMEN SUPERPORTABLE PROJECTOR
EPSON PowerLite 700c Multimedia Projector
F E AT U R E S Superior brightness 800 lumens Extremely portable Superior image quality BENEFITS Works in the most challenging lighting conditions. Superportable 5.8 lb and smaller than a sheet of standard A4 paper (10.5 x 8.4 x 3.5). Three-LCD imaging system for best color saturation and truer color images; 350:1 contrast ratio for blacker blacks and sharper text; 90% corner brightness eliminates hot spots found with DLP. Brilliant projection that supports a range of resolutions from VGA (640 x 480) to UXGA (1600 x 1200), including workstations. Epsons PowerLite 700c is easy to set up and use.
The Epson PowerLite 700c packs 800 lumens of brightness into a 5.8 lb package. As a key player in our new commuter series of superportable projectors, it retains all the world-class reliability our projectors are known for while sacrificing neither image quality nor features. Compared to single-chip processing projectors, like DLP, the PowerLite 700c has superior image quality and corner-to-corner brightness. Its unique three-LCD imaging system generates vivid, eye catching color saturation and sharp, easy-to-read text. Plus, its corner- to-corner brightness and overall image quality allow you to use it in lighting conditions that would defeat lesser projectors. The PowerLite 700c is also filled with presenterfriendly features. Our exclusive SizeWise technology lets you use it with virtually any resolution computer up to UXGA (1600 x 1200). Convenient 15 keystone correction, a zoom lens, USB mouse port and full-featured remote control are also included. And, for presentations that incorporate video, the PowerLite 700c is equipped with a digital comb filter and picture-in-picture capability. A simple four button control panel, context sensitive help and on-screen 3-D menu make setting up and operating the PowerLite 700c a snap. The PowerLite 700c, like all Epson projectors, is backed by one of the strongest support packages in the industry. Our exclusive PrivateLine SM gives you access to person-to-person help. And a new international warranty complements our renowned Road Service support program. With its ease, convenience and audience-pleasing image quality, the Epson 700c sets itslef apart as one of the most sophisticated superportable projectors in the world.
Native SVGA (800 x 600) and SizeWise Four button control panel, help button, USB mouse connection, zoom lens, remote control, and 15 keystone correction Long lamp life (estimated) 2000 hours Powerful video features
Less frequent lamp changes means lower total cost of ownership compared to DLP models. Picture-in-picture allows simultaneous display of video and computer presentations; digital comb filter improves video image quality; supports more worldwide video standards than competitors. Two year limited warranty in the U.S. and Canada; international warranty; 90-day lamp warranty; EPSON PrivateLine (a toll-free hotline open from 6 a.m. to 6 p.m. PST Mon. - Fri.); EPSON Road Service (will provide a replacement projector, usually overnight, if user is on the road.)
Backed by unsurpassed service and support
2361 McGaw Ave Irvine, California 92614 PHONE: (949) 660-7080 FAX: (949) 975-1557
CYAN MAGENTA YELLOW BLACK PANTONE 5125 VARNISH
S P EC I F I C AT I O N S Power Requirements/Consumption
EPSON Original Prism technology
EPSON 1.32" Poly-Silicon TFT; Active-matrix
Number of Pixels
AC 100 to 120V/200 to 240V 10%, 50/60Hz 180W
Multiple Aspect Ratio
2,359,296 pixels (1024 x 768) x 3 panels
5:4 4:3 16:9
SXGA, UXGA VGA, SVGA, XGA Wide screen video NTSC, Chroma subcarrier frequency 3.58 MHz, 4.43 MHz Chroma subcarrier frequency CCIR, Chroma Subcarrier frequency 4.43 MHz CCIR, Carrier frequency 4.43 MHz
Manual zoom /manual focus 1.2:1 zoom, F = 2.0 - 2.2, f = 35 - 42 mm
NTSC, NTSC 4.43, NTSC 5.0 PAL, PAL-M, PAL-N PAL-N, PAL-60 SECAM
Electronic 15 degrees
Ultra High Efficiency (UHE) 2000 hrs. (est.) 120W (user replaceable)
10.5 x 3.5 x 8.4 (W x D x H); 5.8 lb
Diagonal 26" - 300"
3.9' - 52' (1.2m - 15.7m)
PS/2 mouse cable, Macintosh mouse cable, USB mouse cable, computer cable, AV cable, power cable, CD-ROM, remote control, 2 AA batteries, users guide, Quick Start poster
Product/Accessory Part Numbers
24 bit, 16.7 million colors
800 ANSI lumens (typical)
EPSON PowerLite 700c multimedia projector EMP-700 Optional Accessories Wheeled soft case for projector/laptop ELPKS18 Soft shell shoulder case for projector/laptop ELPKS13 Replacement lamp unit ELPLP10S
Front projection Rear/ceiling mount
Two year limited warranty in the U.S. and Canada; international warranty; 90-day lamp warranty; EPSON PrivateLine and EPSON Road Service.
Support - The Epson Connection
Built-in monaural speaker 1w
Pre-Sales Support U.S. & Canada 800-463-7766 Automated Technical Support 800-922-8911 Internet Website http://www.epson.com http://www.presentersonline.com
13.5 - 162 MHz
15 - 92 kHz
50 - 96 Hz
Operating Noise Level
Epson America, Inc. 3840 Kilroy Airport Way, Long Beach, CA 90806 Epson Canada, Ltd. 550 McNicoll, Willowdale, Ontario M2H 2E1 Epson Latin America, Inc. 6303 Blue Lagoon Drive, Miami, FL 33126
Specifications and terms are subject to change without notice. EPSON is a registered trademark of Seiko Epson Corporation. PowerLite is a registered trademark, SizeWise is a trademark and PrivateLine, Epson Connection and Presenters Online are service marks of Epson America, Inc. All other product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks. Copyright 1999 Epson America, Inc. CPD-9688 50K 12/99
Printed on recycled paper
The EMP-700 is a "next generation" ultra portable projector featuring true XGA resolution. It combines high brightness and excellent image quality with a new ultra-compact design. Incorporating many features only previously available on high-end projectors, the EMP-700 combines new miniaturized technology in an ultra small unit. New miniaturized optics, circuit board and a newly developed small size 120W UHP lamp enables the EMP-700 to produce high bright 800 ANSI lumens. The newly developed retractable lens retains the compact size but also allows the lens to be protected during transportation. The EMP-700 is a lightweight, high bright compact projector targeted at the mobile presenter requiring maximum portability, without sacrificing advanced features and brightness, for a versatile, professional presentation.
|Device Type||LCD projector|
|Projector / Panel|
|Image Brightness||800 ANSI lumens|
|Image Contrast Ratio||350:1|
|Image Size||23.6 in - 299 in|
|Projection Distance||3.6 ft - 45 ft|
|Resolution||XGA (1024 x 768)|
|Display Format||786,432 pixels (1,024 x 768) x 3|
|Color Support||16.7 million colors|
|Max Sync Rate (V x H)||96 Hz x 92 kHz|
|Lamp Type||Metal halide 120 Watt|
|Lamp Life Cycle||2000 hour(s)|
|Front Panel Controls||Power on/off, audio volume, zoom, speaker on/off, mouse, effects, resize, menu, help display|
|Projector Lens System|
|Lens Aperture||F/2.0, f/2.1, f/2.2|
|Analog Video Format||NTSC, SECAM, PAL, PAL-N, PAL-M|
|Analog Video Signal||RGB, S-Video, composite video|
|Type||Speaker(s) - integrated|
|Sound Output Mode||Mono|
|Output Power / Channel||1 Watt|
|Speaker(s)||1 x center channel|
|Type||Mouse, remote control - external - wireless, wired|
|Expansion / Connectivity|
|Interfaces||1 x audio - line-out - mini-phone stereo 3.5 mm - 1 1 x mouse - generic - 9 pin D-Sub (DB-9) - 1 1 x mouse - USB - 4 pin USB Type A - 1|
|Connections||1 x display / video - VGA - 15 pin HD D-Sub (HD-15) - 1 1 x audio - line-out - mini-phone stereo 3.5 mm - 1 1 x display / video - S-video output - 4 pin mini-DIN - 1 1 x display / video - composite video/audio output - RCA - 3 2 x audio - line-out - RCA - 2|
|Cables Included||1 x A/V cable 1 x display cable 3 x mouse cable 1 x power cable|
|Power Device||Power supply - integrated|
|Voltage Required||AC 110/220 V ± 10% ( 50/60 Hz )|
|Power Consumption Operational||180 Watt|
|Software / System Requirements|
|Software Included||Drivers & Utilities|
|OS Required||Microsoft Windows 95/98, Apple MacOS|
|Service & Support||2 years warranty|
|Service & Support Details||Limited warranty - parts and labor - 2 years - carry-in|
|Sound Emission||40 dB|
|Universal Product Identifiers|
LP-M5600F Fm Card Capitalism II SLV-X9N TX-36PF10 A5000-A4000 YZ250F Audiogram3 1050E Scan Yamaha RX11 NX8420 Citroen DS3 LE-15A10 Aopen AX33 EWT719 32PFL9603H Speakers HT-X625 C-4000 Zoom Z370A 240V FT-2400H-3 Urc4041 AVM P2 TXP42C2E Minolta 8031 UR5-mdvr DSC-T300 B Series Europe CS806 AVR 155 AR-M256 M316 Amarys 100 F4 14MG10G Corsa Challenger DN-V210 MES-230 KX-TS520FX QV-5700 Simulator 69NT40-489-100 DCR-SR80 GT-S3600 Palm M515 KLV-30XBR900 VS2121 Omnibook XE3 D2935 NH-AA-DA LA40A550 CL608E XV-DV535W Converter Lens 1 1E EL-1801V RX-DS101 Dvcr-2002 LRH-539 NAD T514 DI551 3 6 Yamaha D-85 Meter VI PEG-NX73V Bizhub 40P WK-3800 PM7001 VGN-T1xp-L 425 PN Gothic 3 PDP-435FDE RC68223 P4B266M Logicom G350 ICF-CD815 DSC-W120 MCV903-A0U U8130 1200MU Komfort XBM 838 Omron CJ Rcs-55 KV-25FX20B Classic RC-631M TR2500BC 65105 E1110 D 112 CD4066B SVT124 Asus A3 T-mobile MDA FAX-1360 HBM1228 Reference Book
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101