NETGEAR Wireless LAN Antennas and Accessories
NETGEAR NETGEAR NETGEAR NETGEAR NETGEAR NETGEAR 18 dBi Patch Panel Directional Antenna - ANT24DdBi Omni-directional Antenna - ANTdBi Omni-directional Antenna - ANT24OmW Power Booster - ANT24BNA (part of ME103BDL1NA bundle) Power Injector - ANT24BDC Antenna Cables
NOTE: To obtain optimal results in extending wireless range with antenna installations, it is recommended that a qualified, professional installer is consulted for site survey and proper installation.
Optimize WLAN Range and Power
NETGEARs line of antennas and accessories for 802.11b and 802.11g devices give you multiple options for maximizing the reach and performance of your wireless infrastructure devices. Every WLAN deployment is unique. When planning a network that incorporates wireless, varying facility sizes, construction materials, distance between transmission points and physical obstructions must be accounted for. With both directional and omni-directional antennas, low-loss cables, mounting hardware, and other accessories, installers can customize a value-priced wireless solution that meets the requirements of even the most challenging applications. All NETGEAR antennas are FCC-approved to work with the following NETGEAR models: FVM318, FWG114P ME103 and WG302. ,
18 dBi Patch Panel Directional Antenna
The ANT24D18 indoor/outdoor directional* antenna provides a 3-in-1 solution for mixed applications in combination with an 802.11b or 802.11g access point or wireless router. One, it delivers extended access point range in a single floor environment ideally positioned in the corner of a building. Two, it functions point-to-point so that you can wirelessly connect LANs between buildings in a campus-type environment. Three, it provides multifloor transmission when placed on a ceiling, as the higher power output extends the range through typical flooring materials. Includes several mounting options (fixed wall, wall adjustable, and pole), cable sold separately.
*Directional: Concentrates transmit and receive radio-frequency energy into a cone, or beam, for higher signal strength and reception in a single direction.
9 dBi Indoor/Outdoor Omni-directional Antenna
The ANT2409 indoor/outdoor antenna provides extended point-to multi-point coverage for wireless 802.11b or 802.11g devices. Optimal for medium range indoor or outdoor point-to-multi-point applications. Included lightning arrestor (a $90 value) helps prevent damage due to lightning-induced surges or static electricity in outdoor applications. Typically hung from crossbars of drop ceilings or on a rooftop, the waterproof and UV resistant ANT2409 includes wall and pole mounting materials for installation ease, antenna cable and grounding cable not included.
5 dBi Omni-directional Antenna
The ANT24O5 indoor omni-directional** antenna is designed to extend coverage of wireless 802.11b or 802.11g devices. This antenna is especially useful in optimizing coverage when you want to place your wireless access point or router out of plain view in a wiring closet or above a ceiling pad. Locate this antenna at the top of a cubicle, on a ceiling, desktop or wall, where it is more receptive to radio signals. Ideal placement is on a wall, 2 m high, or on the ceiling facing the area to cover. Includes mounting brackets, cable sold separately.***
** Omni-directional: Radiates radio-frequency energy equally in all directions for widespread, all-points deployment. ***NETGEAR recommends use of antenna cable up to 5 m long with the ANT24O5 antenna.

500 mW Power Booster****

The 500-milliwatt bi-directional power booster increases the transmission signal from an average 50 mW to 500 mW and amplifies the signal by 10 dB (10 times) in receive mode. It is used to enable a single access point device to cover a larger area. Consisting of a bi-directional amplifier, 500 mW (+27 dBm) in transmit mode for +5 to +15 dBm input, it provides 10 dB gain in receive mode. It can also be used to fully compensate for the loss of long antenna cables without any reduction of performance, and permits one to position an antenna at a greater distance from a wireless node. Used in conjunction with a high gain antenna, such as the 18 dBi ANT24D18, it can provide very high outdoor range up to 120 km or about 74 miles. Easy to install, no configuration required; includes ceiling/wall mount bracket, cable sold separately.
**** NETGEAR has approved this product for use in the United States only. As per FCC regulations, the ANT24BNA booster is sold as part of a transmission system which includes the ME103 802.11b ProSafe Wireless Access Point and the NETGEAR 3m cable (ACC-10314-02). This product may only be ordered as part of a bundle p/n: ME103BDL1NA. Use of the ANT24BNA with any other products is strictly prohibited by FCC regulations. Netgear expressly disclaims the implied warranty of merchantability and fitness for a particular purpose for any damage caused by misuse of the ANT24BNA.
Power Injector for the 500 mW Booster
An optional accessory for the 500 mW booster, the ANT24BDC power injector provides power through the antenna cable to the booster. Use this device when the booster is not located near a power outlet. Installed between the access point and the booster, this device injects up to 12 volts and 2 amps to the booster. The antenna cable from the access point to the injector can be up to 3 m in length. The cable between the injector and the booster can be up to 10 m long to achieve maximum performance benefits.

Low-loss Antenna Cables

These 1.5 m, 3 m, 5 m, and 10 m antenna cables offer low loss at 2.4 GHz and added flexibility for setting up access points at a greater distance from a power source. They come with reverse SMA connectors and provide a standard connection optimized for use with NETGEARs line of WLAN antennas, and Booster/Power Injector products (range can be drastically reduced if longer or higher loss cables than these are used.)
d B i Pa t c h Pa n e l D i r e c t i o n a l A n t e n n a - A N T D 1 8

Technical Specifications

Description: Typical Application: Maximum Outdoor Range1: Frequency Range: Gain2: Beam Width: Dimensions: Weight: Package Contents: 18 dBi Patch Panel Directional Antenna with reverse N female jack and reverse N to reverse SMA adapter Indoor/outdoor long range point-to-point connections 15.8 km (~9.8 miles) 2.400 ~ 2.485 MHz 18 dBi Horizontal 60 Vertical 30 262.8 x 262.8 x 40 mm (10.35 x 10.35 x 1.58 in) 1520 g/3.35 lbs. - 18 dBi Patch Panel Directional Antenna - ANT24D18 (cable required, sold separately) - Wall and ceiling mount brackets and hanging materials - One reverse N type to reverse SMA adapter - Installation guide - Warranty/Support information card NETGEAR 2-year warranty

Warranty:

Range estimation is based on two wireless nodes each with an ANT24D18 antenna attached, associating with each other at 11 Mbps under ideal line-of-sight conditions.
Gain: A ratio of decibels to an isotropic antenna that is commonly used to measure antenna coverage.
9 dBi Indoor/Outdoor Omni-directional Antenna - ANT2409
Description: Typical Application: Frequency Range: Gain2: Polarization: Operating Temperature: Weight: Package Contents: 9 dBi Omni-directional Antenna with reverse N female connector Indoor/outdoor medium range point-to-multipoint connections 2400 ~ 2485 MHz 9 dBi Vertical -30 to 80 C (-22 to 176 F).9 kg/2 lbs. - Indoor/Outdoor 9 dBi Omni-directional Antenna ANT2409 - Lightning Arrestor - 2 meter low loss antenna cable (to connect antenna to the lightning arrestor) - Wall and pole mounting brackets and hanging materials - One reverse N/SMA Adapter - Installation guide - Warranty/Support information card NETGEAR 2-year warrranty
5 dBi Omni-directional Antenna - ANT24O5
Description: Maximum Outdoor Range3: Frequency Range: Gain: Polarization: Beam Width: Operating Temperature: Storage Temperature: Dimensions: Weight: Package Contents: 5 dBi Omni-directional Antenna 790m (863.95 yds) 2400 to 2500 MHz 5 dBi Vertical Horizontal 120 Vertical 110 -20 to 65 C (-4 to 149 F) -30 to 80 C (-22 to 176 F) 99.2 x 53.9 x 27.5 mm (3.91 x 21.2 x 1.08 in.) 55 g/.12 lb. - Indoor 5 dBi Omni-directional Antenna ANT24O5 (cable required, sold separately) - Ceiling/wall mount bracket - Installation guide - Warranty/Support information card NETGEAR 2-year warranty
3 Range estimation is based on two wireless nodes, each with an ANT24O5 antenna attached, associating with each other at 11 Mbps under ideal line-of-sight conditions.

NETGEAR Antenna Cables

Description: NETGEAR low-loss cables with 2 Reverse SMA Connectors extend the length between NETGEAR wireless access points or routers and the external antenna without sacrificing range.
ACC-10314-01 ACC-10314-02 ACC-10314-03 ACC-10314-04
Part Number: Cable Length: Maximum Cable Loss with Connectors: Weight:
1.5 m (4.9 ft) 1.4 dB 50 g (1.76 oz)
3m (9.8 ft) 2.4 dB 145 g (5.12 oz)
5m (16.4 ft) 3.7 dB 225 g (7.94 oz)
10 m (32.8 ft) 7.0 dB 440 g (15.53 oz)
Attenuation: Operating Temperature: Minimum Bend Radius: Package Size: Warranty:
0.21 dB/ft maximum or.659 dB/m maximum at 2.5 GHz -40 to 75 C (-40 to 167 F) 26 mm (1 in) 450 x 280 x.12 mm (17.72 x 11.02 x.004 in) NETGEAR 2-year warranty
N E T G E A R 0 m W Po w e r B o o s t e r - A N T B N A
Please check the NETGEAR web site at http://www.NETGEAR.com/go/antennas_fcc for an updated list of approved antenna and wireless device combinations.
Only sold as part of bundle ME103BDL1NA Technical Specifications
Description: Bi-directional Power Booster for 802.11b with 2 Female Reverse SMA Connectors for NETGEAR ME103 802.11b ProSafe Wireless Access Point 2400 to 2500 MHz TDD (burst mode) 600 watts TVS @ 6 VDC 700 mA typ. @ 6 VDC 26.5 dBm minimum + 5 dBm minimum 3 s maximum 10 dB typical 1 dB over operating range 5 dB maximum 3 s maximum 0.2 dB.45 to.99 Nm (4.0 to 8.8 in. lbs.) 22.68 kg (50 lbs.) minimum 2.27 kg (5 lbs.) minimum Brass per JIS H3250 C3604 BD, gold plated per MIL-G-45204 Beryllium Copper per QQ-C-530, gold plated per MIL-G-to 70 C (32 to 158 F) -30 to 80 C (-22 to 176 F) 99.2 x 53.9 x 27.5 mm (3.91 x 21.2 x 1.08 in) 510 g/1.13 lbs. - Indoor 500 mW Power Booster ANT24BNA - Ceiling/wall mount bracket and hanging materials - Power Supply - Installation guide - Warranty/Support information card NETGEAR 1-year warranty

Frequency Range: Operating Mode: DC Surge Protection: Current Drain (TDD Mode): Transmit Power: Transmit Input Power: Transmit Ramp Up time: Receiver Gain: Receiver Frequency Response: Receiver Noise Figure: Receiver Ramp Down Time: RF Connector Insertion Loss: RF Connector Recommended Coupling Nut Torque: RF Connector Coupling Nut Retention Force: RF Connector Contact Captivation Axial: RF Connector Body: RF Connector Contact: Operating Temperature: Storage Temperature: Dimensions: Weight: Package Contents:
N E T G E A R Po w e r I n j e c t o r - A N T B D C
Description: Frequency Range: PTC Fuse: Insertion Loss4: Short Circuit Protect: DC Supply Voltage: Maximum Voltage: Coupling Nut Torque: Operating Temperature: Storage Temperature: Humidity: Dimensions: Weight: Electromagnetic Compliance: Package Contents: Power Injector for NETGEAR ANT24BNA Power Booster with 2 Female Reverse SMA Connectors 2400 to 2500 MHz 2.5 A / 30 V 1.5 dB max. @2.4 to 2.5 GHz PTC Fuse 2.5 A / 30 V DC, 5 V / to 12 V 750 VRMS max.45 to.99 Nm (4.0 to 8.8 in. lbs.) 0 to 70 C (32 to 158 F) -10 to 80 C (14 to 176 F) 10% to 90% 88.2 x 58.9 x 33.4 mm (3.48 x 3.32 x 1.32 in) 220 g (7.76 oz) FCC Part 15 Class B - Indoor Power DC Injector ANT24BDC - Installation guide - Warranty/Support information card NETGEAR 1-year warranty
4500 Great America Parkway Santa Clara, CA 95054 USA Phone: 1-888-NETGEAR (638-4327) E-mail: info@NETGEAR.com www.NETGEAR.com
2004 NETGEAR, Inc. NETGEAR, the Netgear Logo, ProSafe, Everybodys connecting and Auto Uplink are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved.

4/2004 D-Antennas-5

Insertion loss: Attenuation

NETGEAR ProSafe Wireless LAN Antennas and Accessories
NETGEAR NETGEAR NETGEAR NETGEAR 14 dBi Patch Panel Directional Antenna - ANT24DdBi Omni-directional Antenna - ANTdBi Omni-directional Antenna - ANT24O5 Antenna Cables
NOTE: To obtain optimal results in extending wireless range with antenna installations, it is recommended that a qualified, professional installer is consulted for site survey and proper installation.
Optimize WLAN Range and Power
NETGEARs ProSafe line of antennas and accessories for 802.11b and 802.11g devices give you multiple options for maximizing the reach and performance of your wireless infrastructure devices. Every WLAN deployment is unique. When planning a network that incorporates wireless, varying facility sizes, construction materials, distance between transmission points and physical obstructions must be accounted for. With both directional and omni-directional antennas, low-loss cables, mounting hardware, and other accessories, installers can customize a value-priced wireless solution that meets the requirements of even the most challenging applications. All NETGEAR antennas are FCC-approved to work with the following NETGEAR models: WAG302, WG302, WAG102, WG102, FVG318, FWG114P.
ProSafe 14 dBi Patch Panel Directional Antenna
The ANT24D18 indoor/outdoor directional* antenna provides a 3-in-1 solution for mixed applications in combination with an 802.11b or 802.11g access point or wireless router. One, it delivers extended access point range in a single floor environment ideally positioned in the corner of a building. Two, it functions point-to-point so that you can wirelessly connect LANs between buildings in a campus-type environment. Three, it provides multifloor transmission when placed on a ceiling, as the higher power output extends the range through typical flooring materials. Includes several mounting options (fixed wall, wall adjustable, and pole), cable sold separately.
*Directional: Concentrates transmit and receive radio-frequency energy into a cone, or beam, for higher signal strength and reception in a single direction.
ProSafe 9 dBi Indoor/Outdoor Omni-directional Antenna
The ANT2409 indoor/outdoor antenna provides extended point-to multi-point coverage for wireless 802.11b or 802.11g devices. Optimal for medium range indoor or outdoor point-to-multi-point applications. Included lightning arrestor (a $90 value) helps prevent damage due to lightning-induced surges or static electricity in outdoor applications. Typically hung from crossbars of drop ceilings or on a rooftop, the waterproof and UV resistant ANT2409 includes wall and pole mounting materials for installation ease, antenna cable and grounding cable not included.
ProSafe 5 dBi Omni-directional Antenna
The ANT24O5 indoor omni-directional** antenna is designed to extend coverage of wireless 802.11b or 802.11g devices. This antenna is especially useful in optimizing coverage when you want to place your wireless access point or router out of plain view in a wiring closet or above a ceiling pad. Locate this antenna at the top of a cubicle, on a ceiling, desktop or wall, where it is more receptive to radio signals. Ideal placement is on a wall, 2 m high, or on the ceiling facing the area to cover. Includes mounting brackets, cable sold separately.***

** Omni-directional: Radiates radio-frequency energy equally in all directions for widespread, all-points deployment. ***NETGEAR recommends use of antenna cable up to 5 m long with the ANT24O5 antenna.

Low-loss Antenna Cables

These 1.5 m, 3 m, 5 m, and 10 m antenna cables offer low loss at 2.4 GHz and added flexibility for setting up access points at a greater distance from a power source. They come with reverse SMA connectors and provide a standard connection optimized for use with NETGEARs line of WLAN antennas, and Booster/Power Injector products (range can be drastically reduced if longer or higher loss cables than these are used.)
ProSafe 14 dBi Patch Panel Directional Antenna - ANT24D18

Technical Specifications

Description: Typical Application: Maximum Outdoor Range1: Frequency Range: Gain2: Beam Width: Dimensions: Weight: Package Contents: 18 dBi Patch Panel Directional Antenna with reverse N female jack and reverse N to reverse SMA adapter Indoor/outdoor long range point-to-point connections 15.8 km (~9.8 miles) 2400 - 2500 MHz 14 dBi Horizontal 60 Vertical x 240 x 30mm (10.31 x 9.44 x 1.18 in) 1520 g/3.35 lbs. - 14 dBi Patch Panel Directional Antenna - ANT24D18 (cable required, sold separately) - Wall and ceiling mount brackets and hanging materials - One reverse N type to reverse SMA adapter - 2 meter cable - Lightening Arrestor - Installation guide - Warranty/Support information card NETGEAR 2-year warranty

Warranty:

1 Range estimation is based on two wireless nodes each with an ANT24D18 antenna attached, associating with each other at 11 Mbps under ideal line-of-sight conditions.
Gain: A ratio of decibels to an isotropic antenna that is commonly used to measure antenna coverage.
ProSafe 9 dBi Indoor/Outdoor Omni-directional Antenna - ANT2409
Description: Typical Application: Frequency Range: Gain2: Polarization: Operating Temperature: Weight: Package Contents: 9 dBi Omni-directional Antenna with reverse N female connector Indoor/outdoor medium range point-to-multipoint connections 2400 ~ 2485 MHz 9 dBi Vertical -30 to 80 C (-22 to 176 F).9 kg/2 lbs. - Indoor/Outdoor 9 dBi Omni-directional Antenna ANT2409 - Lightning Arrestor - 2 meter low loss antenna cable (to connect antenna to the lightning arrestor) - Wall and pole mounting brackets and hanging materials - One reverse N/SMA Adapter - Installation guide - Warranty/Support information card NETGEAR 2-year warrranty

ProSafe 5 dBi Omni-directional Antenna - ANT24O5
Description: Maximum Outdoor Range3: Frequency Range: Gain: Polarization: Beam Width: Operating Temperature: Storage Temperature: Dimensions: Weight: Package Contents: 5 dBi Omni-directional Antenna 790m (863.95 yds) 2400 to 2500 MHz 5 dBi Vertical Horizontal 120 Vertical 110 -20 to 65 C (-4 to 149 F) -30 to 80 C (-22 to 176 F) 99.2 x 53.9 x 27.5 mm (3.91 x 21.2 x 1.08 in.) 55 g/.12 lb. - Indoor 5 dBi Omni-directional Antenna ANT24O5 (cable required, sold separately) - Ceiling/wall mount bracket - Installation guide - Warranty/Support information card NETGEAR 2-year warranty
Range estimation is based on two wireless nodes, each with an ANT24O5 antenna attached, associating with each other at 11 Mbps under ideal line-of-sight conditions.

NETGEAR Antenna Cables

Description: NETGEAR low-loss cables with 2 Reverse SMA Connectors extend the length between NETGEAR wireless access points or routers and the external antenna without sacrificing range.
ACC-10314-01 ACC-10314-02 ACC-10314-03 ACC-10314-04
Part Number: Cable Length: Maximum Cable Loss with Connectors:
4500 Great America Parkway Santa Clara, CA 95054 USA Phone: 1-888-NETGEAR E-mail: info@NETGEAR.com www.NETGEAR.com
1.5 m (4.9 ft) 1.4 dB 50 g (1.76 oz)
3m (9.8 ft) 2.4 dB 145 g (5.12 oz)
5m (16.4 ft) 3.7 dB 225 g (7.94 oz)
10 m (32.8 ft) 7.0 dB 440 g (15.53 oz)

Weight:

2006 NETGEAR, Inc. NETGEAR, the NETGEAR logo, Connect with Innovation, Everybodys connecting, the Gear Guy logo, IntelliFi, ProSafe, RangeMax and Smart Wizard are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. This product has been tested for quality assurance and this product or its components may have been recycled. * Free basic installation support provided for 90 days from date of purchase. Advanced product features and configurations are not included in free basic installation support; optional premium support available. 4/2006 D-Antennas-6

Attenuation: Operating Temperature: Minimum Bend Radius: Package Size: Warranty:
0.21 dB/ft maximum or.659 dB/m maximum at 2.5 GHz -40 to 75 C (-40 to 167 F) 26 mm (1 in) 450 x 280 x.12 mm (17.72 x 11.02 x.004 in) NETGEAR 2-year warranty