Page 4

Notices

Attention

Telephone Line Interruption A continuous land-based phone line connection is required for DIRECTV Pay Per View functionality and DIRECTV subscriptions. Any calls generated by the DIRECTV Receiver are toll free. These calls are typically made in the middle of the night; your phone is in use for approximately 30 seconds. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
Program Recording Restrictions All other taping is expressly prohibited. Some programming may not be taped. An additional taping fee may be applied. Call your program provider for details.

Owner's Record

The model number, serial numbers and Receiver ID are located on the rear panel of the DIRECTV Receiver. The number for the Access Card is on the back of the card and on the carton label. Record these numbers for reference when calling your sales or service representative regarding this product. Model Number: ____________________________________ Serial Number: ____________________________________ Access Card Number: _______________________________ Receiver ID: ________________________________________

Customer Support

For DIRECTV Programming For subscription information, or to resolve problems related to programming, call: DIRECTV at 1-800-DIRECTV (1-800-347-3288) or visit the DIRECTV Web site (DIRECTV.com). For Installation To arrange for the installation of your DIRECTV Receiver, call the dealer from whom you purchased your system. For Hardware To resolve problems related to this DIRECTV Receiver, call DIRECTV customer support at 1-800-347-3288.

Trademark and copyright statements 2004 DIRECTV, Inc. DIRECTV and the Cyclone Design logo are registered trademarks of DIRECTV, Inc. All other trademarks and service marks are the property of their respective owners. Macrovision Information This equipment incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology is granted by Macrovision for home and other limited DBS IRD pay per view uses only. Reverse engineering or disassembly is prohibited.

Page 6

Limited 90 Day Warranty
DIRECTV warrants your DIRECTV Receiver (Model Number: D10-200) and any included accessories against defects in material or workmanship for a period of ninety (90) days after the date of purchase.

WHO IS COVERED?

You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. THIS LIMITED WARRANTY EXTENDS ONLY TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THE DIRECTV RECEIVER AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. THIS WARRANTY DOES NOT EXTEND TO COMMERCIAL USERS. THIS PRODUCT IS NOT AUTHORIZED FOR USE OUTSIDE THE UNITED STATES AND ANY SUCH USE VOIDS THIS WARRANTY.
Reception transmission problems caused by signal conditions, telephone line, or cable or antenna systems outside the unit. A product that has been modified or adapted to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. A product used for commercial or institutional purposes. DIRECTV makes no warranty that the access connection will be a local (not long distance) phone call. The continued provisioning of any of the programming and other services delivered through the Receiver including but not limited to television programming, show information, program guide data, and scheduling information.

MAKE SURE YOU KEEP.

Please keep your sales receipt or other document showing proof of purchase. Attach it to this User Guide and keep both nearby. Also keep the original box and packing material in case you need to return your product.

WHAT IS COVERED?

Warranty coverage begins the day you purchase the product. For ninety (90) days from the purchase date, at the option of DIRECTV, the DIRECTV Receiver will be repaired or replaced with a new, repaired, refurbished or comparable product (whichever is deemed necessary) if it becomes defective or inoperative. This exchange is done without charge to you for parts and labor. You will be responsible for the cost of shipping to and from the location designated by DIRECTV. If DIRECTV cannot reasonably repair or replace the Receiver then DIRECTV may, at its sole discretion, refund the price you paid for the product or the current retail price of the product. All products, including replacement products, are covered only for the original warranty period. When the warranty on the original product expires, the warranty on the replacement product also expires. After ninety (90) days from the date of purchase, you pay for the replacement of all parts, and for all labor charges. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
BEFORE REQUESTING REPAIR SERVICE.
Please check the troubleshooting section of this guide. This may save you a call to DIRECTV Customer Care.

TO GET WARRANTY SERVICE.

Warranty service will be provided by DIRECTV. If you believe you need service for your Receiver, contact DIRECTV at 1-800-DIRECTV (347-3288). A representative will go through a diagnostic checklist with you. If it is determined that the product needs to be returned for service or exchanged, you will receive a return authorization number. The representative will give you complete shipping details.
TO GET OUT-OF-WARRANTY SERVICE.
To obtain out-of-warranty service contact DIRECTV at 1-800-DIRECTV (347-3288) for information on the possibility of and any costs for repair or replacement of out-of-warranty products.

WHAT IS EXCLUDED?

Your warranty does NOT cover: Labor charges for installation or setup of the product. Installation, performance of, or repair of: audio/video cabling, telephone line, or accessory attachments used with the product. Product replacement because of misuse, accident, lightning damage, unauthorized repair, or other cause not within the control of DIRECTV. Incidental or consequential damages resulting from the product. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. Any modifications or other changes to the product, including but not limited to software or hardware modification in any way other than as expressly authorized by DIRECTV will void this limited warranty. Except in the case of hardware or software provided by DIRECTV, installing software modifications hacks or utilizing service access or back doors will void this limited warranty.

REMEMBER.

Record the model and serial numbers found on the product below. MODEL # _____________________________________________ SERIAL # _____________________________________________

Page 8

ALL WARRANTIES IMPLIED BY LAW, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY. WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., THIS EXPRESS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS AND SIMILAR OBLIGATIONS OF DIRECTV. REPAIR OR REPLACEMENT AS PROVIDED IN THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY. IN NO EVENT WILL DIRECTV BE LIABLE FOR ANY AMOUNT GREATER THAN THE RETAIL PRICE OF THE DIRECTV RECEIVER. DIRECTV SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THE DIRECTV RECEIVER. SOME STATES DO NOT ALLOW LIMITATIONS ON WARRANTIES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. DIRECTV, Inc. 2230 E. Imperial Hwy El Segundo, CA 90245 1-800-DIRECTV (347-3288)

FCC Information

Declaration of ConformityStandards to which Conformity is declared: FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: DIRECTV, Inc. 2230 E. Imperial Hwy El Segundo, CA 90245 1-800-DIRECTV (347-3288) Trade Name: DIRECTV Type of Equipment: DIRECTV Receiver Model Number: D10-200 Federal Communications Commission (FCC): This equipment complies with both Part 15 and Part 68 of the FCC rules. Your DIRECTV Receiver complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving satellite dish antenna. Increase the separation between the equipment and the DIRECTV Receiver. Connect the equipment into an outlet on a circuit different from that to which the DIRECTV Receiver is connected.

DIRECTV Receiver to TV and VCR with A/V cables
If connection option D best matches your needs, follow these steps:
Connect the RG-6 coaxial cable running from your satellite dish to the SATELLITE IN jack on the back of your DIRECTV Receiver. Connect the supplied phone cord to a telephone wall jack and to the Phone Line jack on the back of the DIRECTV Receiver. Matching like colors, connect the supplied A/V cables to the AUDIO OUT and VIDEO OUT jacks on the back of the DIRECTV Receiver. Connect the other ends of these A/V cables to the audio and video input jacks on your VCR. Be sure to connect the A/V jacks on the DIRECTV Receiver to corresponding inputs on your VCR (video out to video in, left audio out to left audio in, right audio out to right audio in). Matching like colors, connect another set of A/V cables (not included) to the other set of audio and video output jacks on the back of the DIRECTV Receiver. Connect the other ends of these cables to the audio and video input jacks on your TV. Be sure to connect the outputs on the DIRECTV Receiver to corresponding inputs on your TV. (Optional) if your TV and VCR both have S-Video jacks, you can also make the S-Video connections shown in the illustration. This step is optional; it provides improved picture quality. Plug in the power cords for your TV, VCR, and DIRECTV Receiver.

Page 30

Connection option E:
Set your A/V receiver and TV to the appropriate input mode. See the manuals for your A/V receiver and TV for instructions.)
DIRECTV Receiver to TV and A/V receiver
If connection option E best matches your needs, follow these steps:
Make sure your TV, A/V receiver, and DIRECTV Receiver are turned off and unplugged.
Connect the RG-6 coaxial cable running from your satellite dish to the SATELLITE IN jack on the back of your DIRECTV Receiver. Connect the coaxial cable running from your cable TV system or off-air TV antenna to the OFF-AIR IN jack on the back of the DIRECTV Receiver. Connect the supplied phone cord to a telephone wall jack and to the Phone Line jack on the back of the DIRECTV Receiver. Matching like colors, connect the supplied A/V cable to the AUDIO OUT and VIDEO OUT jacks on the back of the DIRECTV Receiver. Connect the other ends of the A/V cables to appropriate audio and video input jacks on your A/V receiver. Be sure to connect the outputs on the DIRECTV Receiver to corresponding inputs on your A/V receiver (video out to video in, left audio out to left audio in, right audio out to right audio in). Connect another set of A/V cables (not included) to the second set of audio and video output jacks on the back of the DIRECTV Receiver. Connect the other ends of these A/V cables to the appropriate audio and video input jacks on your TV. Be sure to connect the outputs on the DIRECTV Receiver to corresponding inputs on your TV. (Optional) if your TV and A/V receiver both have S-Video jacks, you can also make the S-Video connections shown in the illustration. This step is optional; it provides improved picture quality. Plug in the power cords for your TV, A/V receiver, and DIRECTV Receiver.

Highlight the Installation menu item, then press the SELECT button. The Installation menu appears. Highlight the Set Dish menu item, then press the SELECT button. The Set Dish menu appears.
Highlight the Dish Pointing menu item, then press the SELECT button. The Dish Pointing screen appears. Use the right-arrow button on your remote control to highlight the space for the first digit in the ZIP code.
Use the 0 - 9 buttons on your remote control to enter your five-digit ZIP code. When you have entered all five digits, the screen updates to display the correct azimuth, elevation, and (for oval dish types only) tilt. Azimuth refers to the left-to-right angle to which you should point your dish. Elevation refers to the up-and-down angle to which you should point your dish. Tilt (for oval dishes only) refers to the amount off-horizontal you should twist the dish on its axis. Write down these numbers and use them to accurately point your satellite dish. To return to the Set Dish menu, press the BACK button on your remote control. To exit the Menu system, press the EXIT button on your remote control.
The sections that follow detail each of these procedures.

Page 34

Checking the satellite signal strength
The Signal Meter allows you to check the strength of the signal from the satellite to your satellite dish. This is useful while setting up your satellite dish, and while troubleshooting any reception problems you may encounter. Satellite signal strength can be affected by how accurately you have pointed the satellite dish, and by any obstructions between the satellite and the satellite dish (tree limbs, for example).

Setting the dish type

To function properly, your DIRECTV Receiver needs to know what type of satellite dish you are using. You can specify the dish type using the instructions here, or you can follow the steps on page 36 to use the Auto Detection menu item to automatically set the dish type.
To check your satellite signal strength, follow these steps:
To manually set the dish type:
Press the MENU button on your remote control.
Highlight the Setup menu item, then press the SELECT button.
Highlight the Installation menu item, then press the SELECT button.
If the Progress screen (shown here) is on your TV screen, select Installation by pressing the SELECT button. If this screen is not displayed, access the Main Menu by pressing the MENU button on your remote control. Then use the arrow buttons on your remote control to highlight the Setup menu, and press the SELECT button. Then highlight the Installation menu, and press the SELECT button. The Installation menu appears. Highlight the Set Dish menu item, then press the SELECT button. The Set Dish menu appears.
Highlight the Set Dish menu item, then press the SELECT button.
Highlight the DIRECTV Satellite Signal Meter menu item, then press the SELECT button. The DIRECTV Satellite Signal Meter screen appears. The signal meter starts checking the satellite signal strength immediately. The signal strength (from 0-to-100%) is indicated at the bottom of the screen. The DIRECTV Satellite Signal Meter screen allows you to check signal strengths from different Satellites, and different Transponders. Transponders are the equipment on satellites that receive the signal from the earth-based program providers and relay it back to earth to your satellite dish. Different transponders handle the signals for different TV channels. When setting up your satellite dish, you should try to maximize the signal strength across all of the satellites and transponders. To check the signal strength for different transponders, highlight the on-screen Transponder option, then use the up- and down-arrow buttons to change the setting. The signal meter updates to show you the signal strength for the new transponder.

Guide overview

This diamond marks the current time (so you can see how close you are to a program start or end time). Title of the highlighted program or channel This Banner shows information about the channel or program highlighted in the Guide.
Current time and date Picture-inGuide shows you the program you are watching. Signal type
To get information on a channel (rather than a program), use the arrow keys on the remote control to highlight the channel entry in the Guide. The Channel Banner displays information about the high lighted channel.
The program list; use the arrow buttons on your remote control to highlight different areas.
Press the INFO button on your remote control while a channel entry is highlighted to see a Channel Detail Screen containing more information about the highlighted channel.
The program currently highlighted.
One or more alternative languages are available for the program.

Page 48

Tuning to a channel with the Guide
To tune to a program or channel listed in the Guide: Highlight the program or channel you want to watch.
Searching by Credits, Title, or Text
To find programs that star a certain actor, share a director, have a particular character, have won a specific award, or were created in a certain year, search By Credits. To search for a program whose title you know, search by title. Searching by text looks at both credits and titles to find programs that match your search terms.
Press the SELECT button. The Guide disappears, and the channel you selected fills the screen.
While viewing the Guide, press the ACTIVE button on your remote control. A search list appears, allowing you to choose a type of search. Highlight By Credits, By Title, or By Text, then press the SELECT button. The search screen you selected appears. If you chose to search By Credits, the screen allows you to select a type of credit to search by. Highlight one of the five Credit types (Actor, Director, Role, Award,or Year), and press the SELECT button. Highlight the first letter in the word you wish to search for, then press the SELECT button. To erase a letter, highlight the on-screen left arrow and press the SELECT button. To clear the entire entry, highlight the on-screen Clear button and press the SELECT button. Continue to select letters from the on-screen keyboard until you have completed your search term. As you enter letters, an on-screen list shows you matches for the text you have entered so far. To execute the search you can either highlight the on-screen Search button and press the SELECT button, or you can highlight an item from the on-screen list and press the SELECT button. A list of programs related to your search terms appears. To see a list of show times for one of the search results, highlight that program, then press the SELECT button. To see information about one of the search results, highlight that program, then press the INFO button.

Chapter 5: User profiles
This chapter tells you how to modify and select user profiles. Its contents include:
User profiles basics Editing user profile names Editing channel lists Setting ratings limits Allowing or blocking pay per view purchases Setting a pay per view spending limit Setting the screen color and translucency Setting the current user profile Locking and unlocking your DIRECTV System
Editing user profile names
The four profiles named User 1 - 4 can be renamed for members of your household. The Family and All Channels profiles cannot be renamed. You can change the names of User 1 - 4 profiles to anything you wish, using up to eight letters and numbers.

User profile basics

If your DIRECTV Receiver is going to be used by more than one person in your household, you should consider setting up user profiles for each user. The Profiles section of the Menu system allows you to: Set ratings limits for the DIRECTV Receiver (applies to all users). Set pay per view spending limits for the DIRECTV Receiver (applies to all users). Edit channel lists for the DIRECTV System, and customized lists for individual users. Change the color and translucency of the Menu and Guide screens for each user profile. Set which user profile is currently active. Lock and unlock the system (controlling when the ratings limits, spending limits, and channel restrictions are active). There are five user profiles you can choose: Family: The Family user profile is the master profile for your DIRECTV Receiver. The ratings limits, channel restrictions, and pay per view spending restrictions you set in the Family profile apply to all of the user profiles. These four user profiles allow individuals in your household to create custom channel lists and custom screen appearances for their own use. These profiles can be renamed to identify them with members of your household. Ratings, spending, and channel restrictions set in the Family profile still apply when one of these four user profiles is the active profile and the system is locked. You can change the Screen color or Translucency in the preferences of the set up menu.
Highlight the PROFILES menu item, then press the SELECT button. The PROFILES menu appears.

Setting the Local Time options
The Local Time setting (in the Installation section of the Setup menu) allows you to control whether to allow your service provider to automatically control two time settings:
the time zone your DIRECTV Receiver uses, and whether your DIRECTV Receiver observes Daylight Savings Time.
Reviewing your Caller ID list
If you turn the Local Time Setting on, you can choose a time zone and decide whether or not to observe Daylight Savings Time. With the Local Time setting off, your service provider automatically controls these settings for you. Follow these steps to turn the Local Time Setting on or off, and (if you turn it on) to set your Time Zone and Daylight Savings Time observance.
To see a list of calls you have received, follow these steps: Press the MENU button on your remote control.
Highlight the Review Caller IDs menu item, then press the SELECT button. The Review Caller IDs screen appears. The calls on the list are sorted in time order. To see details about any of the listed calls, highlight the call from the list, then press the SELECT button. A screen appears displaying the total number of calls received from that phone number and the times and dates for the three most recent calls. To delete a Caller ID record, highlight the on-screen Delete button, then press the SELECT button. To return to the Review Caller IDs list, highlight the on-screen Back button, then press the SELECT button.
Highlight the Local Time menu item, then press the SELECT button.
To change the Local Time Setting, highlight it using the arrow buttons on your remote control, then press the SELECT button. A list appears from which you can indicate whether you want the local time setting on (you set the time zone and daylight savings time observance), or off (your program provider controls the time settings).
Highlight On or Off, then press the SELECT button. The list disappears, and the Local Time Setting menu item reflects your choice. If you turn the Local Time Setting off, the Time Zone and Daylight Savings Time options are controlled by your program provider; these menu items become unavailable. If you turn the Local Time Setting on, continue with the following steps to set your time zone and whether you wish to observe daylight savings time.

Page 76

Highlight Time Zone menu item, then press the SELECT button. A list appears from which you can choose your local time zone.
Viewing important information and a list of features supported by your DIRECTV Receiver
The System menu allows you to view a list of important details about your DIRECTV Receiver, as well as a list of features supported by your DIRECTV Receiver. To view this information, use the System Information and System Features items in the System portion of the Setup menu.

Highlight your Time Zone, then press the SELECT button. The list disappears, and the Time Zone menu item reflects your choice. Highlight the DST Observation menu item, then press the SELECT button. A list appears from which you can choose to turn Daylight Savings Time observance on or off. Highlight On or Off, then press the SELECT button. The list disappears, and the Status line indicates either DST in effect or Standard time in effect.
Viewing information on automatic system upgrades
The System Upgrades menu item in the System menu provides information about the current software on your DIRECTV Receiver, and a history of when previous upgrades have been downloaded to your Receiver. To View this information, use the System Upgrades item in the System portion of the Setup menu.
Installing a new Access Card
Your DIRECTV service provider may send you a new, replacement Access Card. When you receive a new card, follow these steps to continue your DIRECTV service without interruption:
The System Test feature allows you to quickly check the status of the satellite signal, your Access Card, and your phone line connection. This is helpful while troubleshooting any problem you may experience with your DIRECTV Receiver.
Highlight the New Access Card menu item, then press the SELECT button. The New Access Card screen appears. To start replacing your Access Card, highlight the on-screen SELECT button, then press the SELECT button. On-screen instructions tell you how to replace your old card with the new one. Follow these instructions.

D10-200 CHAPTER 7-ENG_01

10:06 AM

Page 78

CHAPTER 7 Programming the remote control
Chapter 7: Programming the remote control
This chapter explains how to program your remote control so that you can use it to operate your TV, VCR, or other A/V equipment. Chapter sections include:
Programming the remote control Operating a device with your programmed remote control Code lists

TV INPUT Select setup

Once youve set up your TV Power, VOL and MUTE, you can program the TV INPUT button if youd like. Move the slide switch near the top of the remote to TV.
Programming the remote control
Your DIRECTV Receivers remote control can be programmed to operate your TV, VCR, DVD player and other A/V equipment. You use the code lists provided in this chapter to enter the code for your brand of TV, VCR, etc.
Point the remote away from your DIRECTV Receiver. Press and hold MUTE and SELECT until the light near the slide switch on the remote flashes twice. (about 5 seconds) Enter 0. The light will blink twice.

If you want to hide the TV INPUT button, then follow steps 1 through 3 again, and the light will blink 4 times, then pressing the TV INPUT will do nothing.
Programming your remote control
TV Setup (TV Power, VOL and MUTE) Set up AV1 or AV2 to control DVD, VCR, other TV, second DIRECTV Receiver, or Stereo
You can program the remote control to work with other electronic components in your home. Move the slide switch near the top of the remote control to AV1 or AV2. You can program the DIRECTV remote control to turn your TV power, volume and mute. Move the slide switch near the top of the remote to TV.
Point the remote away from your DIRECTV Receiver. Press and hold MUTE and SELECT until the light near the slide switch on the remote flashes twice. (about 5 seconds) Enter the five-digit code for your TV (refer to the code list located at the back of this users guide). Test the remote by press the PWR, VOL and MUTE. If the remote is not controlling your television, repeat steps 2 and 3, using a different five-digit code. If youve tried all the codes for your TV, and you cant control your TV, then try Perform a Code Search (see page 81).
Point the remote away from your DIRECTV Receiver and components. Press and hold MUTE and SELECT until the light near the slide switch on the remote flashes twice. (about 5 seconds) Enter the five-digit code for the component and brand (refer to the code list located at the back of this users guide). Test the remote by pressing the PWR button on the remote. If the component turns off/on then you successfully programmed your remote. If not then repeat step 2 and 3 with the next code for your component. If youve tried all the codes for component, and you cant control your equipment, then try Perform a Code Search (see page 81).
Once your remote is programmed to work with your TV, the VOL and MUTE key will work regardless of the slide switch position. If you would like to change the VOL and MUTE to work with another component, you can. Simply set up your remote to work with the component, and then follow the Volume Lock instructions (see page 80).

Page 80

Perform a Code Search
If you were unable to find a code for your brand of TV or component, then you can try a code search. This process may take up to 30 minutes. First turn on the TV or component.

Volume Lock

If you programmed your remote to control your TV, then the VOL and MUTE key will automatically control the volume on your TV, regardless of the slide switch position. If you want the VOL/MUTE keys to control a different component, such as your stereo, you can. First, program AV1 or AV2 to work with your stereo or A/V equipment (see above instructions).

Move the slide switch near the top of the remote control to the position you would like to lock the VOL & MUTE keys to. Point to remote away from your DIRECTV Receiver and components. Press and hold MUTE and SELECT until the light near the slide switch on the remote flashes twice. (about 5 seconds) Enter 3. The light will blink twice.
1 Move the slide switch near the top of the remote control to the appropriate position. 2 Point the remote away from your DIRECTV Receiver and components. Press and hold MUTE and 3 SELECT until the light near the slide switch on the remote flashes twice. (about 5 seconds) Enter one of the following 4 digits 4 TV : or DVD : VCR 9912

Stereo : 9913

Now no matter which position your slide switch is in, the VOL and MUTE will work this new component.

Global Volume Unlock

Depending on how you set up your remote, the VOL and MUTE will control only your TV or other component, no matter which position the switch is in. If you dont want it to work this way, the remote can be programmed so that the VOL and MUTE work with multiple components based on the switch position. Point to remote away from your DIRECTV Receiver and components. Press and hold MUTE and SELECT until the light near the slide switch on the remote flashes twice. (about 5 seconds) Enter 3 then VOL UP. The light will blink twice.
5 Point the remote to the TV or component and press CHAN UP. Repeatedly press the CHAN UP 6 until the TV or component turns off. When the TV or component turns off, the press SELECT. 7
If the light flashes 3 times before the TV or component responds, then youve cycled all codes and unfortunately the code you need is not available. You must then use the remote that came with your TV or component.
Press the PWR key on the remote control.

Factory Default

Now the VOL and MUTE will work for the component selected by the slide switch position.
1 Enter 1. The light on the remote will flash twice. 2
Now you have cleared the AV1, AV2 and TV modes.
To reset all the functions of the remote control to the factory defaults, follow these steps. Point the remote away from your DIRECTV Receiver and components. Press and hold MUTE and SELECT until the light near the slide switch on the remote flashes twice. (about 5 seconds)

Operating a device with the programmed remote control
To operate a device with your programmed remote control, move the Slide switch to the required mode. (TV, AV1, AV2, or DIRECTV). Then use the remote control to operate that device. The remote control will continue to operate that device until the current mode is changed using the slide switch. Each time you wish to use a different device with the remote control, select the intended device using the slide switch before starting.

Page 82

Code lists
Use these lists to find the codes you need to program your DIRECTV Receivers remote control to operate your other A/V devices. For brands with multiple codes listed, try the codes in order until you find one that works for your device.
DirecTV SATELLITE RECEIVERS

Brand names

DirecTV

TELEVISION (continued)

Daewoo Denon Dumont Durabrand Dwin Electroband Emerson

Code numbers

00001, 00002, 00003, 00004
10451, 11661, 10672, 10017 10180, 10178 10774, 10154, 10236, 10463, 10180, 10178, 10171, 10179, 10154 10179, 10809, 10683, 10853 10180, 10171, 11756, 11755 10047, 10051, 10451, 10178, 10021, 11447 10017, 10030 10030, 10178 10180, 10748 10145, 10016, 10151, 10180, 10030 10016

AMPLIFIERS

GE JVC Luxman Marantz Nakamichi Optimus Realistic Sansui Sony Soundesign Victor Wards Yamaha

RECEIVERS (continued)

30689 30078, 30078, 30211 30354

TELEVISION

Admiral Advent Aiko Akai Alaron Albatron Ambassador America Action Ampro Anam AOC Apex Digital Audiovox Bell & Howell Bradford Broksonic Candle Carnivale Carver Celebrity Celera Changhong Citizen Clarion Concerto Contec Craig Crosley Crown Curtis Mathes
Kenwood KLH Linn Magnavox Marantz MCS Mitsubishi Onkyo Optimus Oritron Panasonic Philips Pioneer Polk Audio Proscan Quasar RCA
31313, 31570, 30027 31412, 31189, 31269, 30189, 30531, 31514 31189, 31269, 30039, 31393 31298, 30135 31023, 31074, 31518, 30039, 30309 31189, 31269, 30189 31023, 30531, 31384, 30150, 30014, 31023, 31609, 31254, 31074, 31511, 31390, 31869 31058, 31758, 31313 31390, 31074 31518, 30039, 31390 30189, 30014 30176, 31331 31293

Auto Configuration Process to Acquire 72.5 and 95 By Receiver Model If you need to run an auto configuration on a DIRECTV Receiver, find the receiver model number below and follow the steps outlined.
1. DIRECTV D10 Press MENU on the remote Select SETTINGS Select SATELLITE Select AUTO DETECT Press (dash) on the remote three times 2. DIRECTV D10-200 Press MENU on the remote Select SETUP Select INSTALLATION Select SET DISH Select AUTO DETECTION Select SELECT 3. DIRECTV D10-300 Press MENU on the remote Select SETUP Select DISH TYPE Select AUTO SELECTION Select START AUTO SELECTION 4. DIRECTV HR10-250 Press DIRECTV on the remote Select READ NEW MESSAGES & SETUP Select SETTINGS Select SATELLITE & OFF AIR ANTENNA Select RESET SATELLITE INFORMATION Press Thumbs Down three times Press ENTER Follow the remaining on-screen instructions to finish auto configuration process 5. HNS HBH-SA, HAH-SA, SD-HBH Press MENU on the remote Select SYSTEM SETUP Highlight INSTALL and scroll right Select AUTO CONFIG 6. HNS HTL-HD, Sony SAT-HD300, Zenith LSS-3200A Press MENU on the remote Select SYSTEM SETUP Highlight INSTALL and scroll right Select AUTO CONFIG 7. Philips 5500/5400 Press MENU on the remote Highlight SETUP and press OK Highlight DISH TYPE and press OK Highlight AUTO SELECTION and press OK Press OK to start auto selection, wait for all 19 steps to complete 8. RCA 435RH, 455RH, 486RH Press MENU on the remote Select SYSTEM SETUP Select RECIEVER OPTIONS Select MULTISWITCH SETUP Select CONTINUE Select AUTO DETECT Select CONTINUE 9. RCA DTC-210 Press MENU on the remote Select SYSTEM SETUP Select INSTALLATION Select SET DISH Select AUTO DETECTION Select OK
10. Samsung SIR-S300W, SIR-S310W, SIR-S360W Press MENU on the remote Select SETUP Select INSTALLATION Select SET DISH Select AUTO DETECTION Select OK or SELECT 11. Sony SAT-HD200, Zenith HDSAT520 Press MENU on the remote Select DIRECTV Select INITIAL SETUP Select SELECT DISH Select AUTO DETECTION 12. DVR Receivers: HNS HDVR2, SDDVR120, SD-DVR40, SD-DVR80; Philips DSR7000/17, DSR704, DSR708; RCA DVR120, DVR39, DVR40, DVR80; Samsung SIR-S4040R, SIR-S4080R, SIRS4120R Press DIRECTV on the remote to get to DIRECTV Central Select MESSAGES & SETUP Select RECORDER & PHONE SETUP Select AUTO DETECT SATELLITE INFORMATION Press Thumbs Down 3 times Press Enter Follow the remaining on-screen instructions to finish the process