TRIAX MOBIUS TRIAX SPEED 100 TRIAX SPEED 50 TRIAX SPEED 10

+/_ to change value

Continue to Next Setting
Select 12 or 24 Hour Clock
Select Day or Month Display
In TIME mode you can set time and calendar information within two time zones. You can set two time alarms in TIME mode. The time alarm will sound for 20 seconds. Power Save: Display shuts off to conserve battery life. Press any button to turn watch ON
NOTE: The TRIAX SPEED 10 has one time zone and one alarm
BEGIN setting Time and Date
Turn Button Chime ON / OFF

Adjust Screen Contrast

Electrolite ON

Switch Time Zones

EXIT Time and Date
TIME Warp: Hold for 1 second in any mode to return to TIME mode
Scroll to TIME mode to set Alarms
Alarm ON / OFF BEGIN by pressing VIEW button to select Alarm 1 or Alarm 2
Adjusted Alarms turn ON upon EXIT
RUN mode can be used to capture lap and total time data down to 1/ 100th of a second. The convertible display can be easily switched between total time, lap time or both simultaneously during a workout. NOTE: The TRIAX SPEED 10 does not have a convertible display
VIEW button changes the convertible display to total time, lap time or both simultaneously Mark LAP 2 ( Lap flashes for 2 sec onds) START Run Mark LAP 1 ( Lap flashes for 2 sec onds)

STOP Run

Run saved to DATA mode

RESET Run

NOTE: The TRIAX SPEED 10 has a one run memory. Run is automatically stored to DATA mode.

CHRONOGRAPH LIMITS

TRIAX MOBIUS / TRIAX SPEED 100 19:59' 59" 99 (auto stops) 30 Run memory 100 Laps TRIAX SPEED 50 19:59' 59" 99 (auto stops) 10 Run memory 50 Laps TRIAX SPEED 10 19:59' 59" 99 (auto stops) 1 Run memory 10 Laps

H20 RESIST

ATTENION: Water damage may occur if the buttons are pressed underwater

MATERIAL SPECIFICATIONS

CRYSTAL Mineral Glass STRAP Polyurethane CASE Polycarbonate CASEBACK Stainless Steel BEZEL Stainless Steel BUTTONS Polycarbonate BUCKLE Stainless Steel

OPERATING TEMPERATURE

-5 to 50 Celsius
RUN mode has a PACE function which compares actual lap and total times to preset PACE target times NOTE: The TRIAX SPEED 10 does not have the PACE function

EXIT back to RUN mode

Turn PACE targets ON / OFF
Turn PACE ALARM ON / OFF The PACE ALARM will give 5 short beeps before the end of each target segment

Set Segment 1

_ Seconds, Minutes and Hours
Lap and total target time differentials display for 2 seconds Mark LAP 2 Mark LAP 1

START Run

View PACE target times before starting workout

CLEAR ALL PACE segments

In INTERVAL mode you can set five repeating segments for customized interval training. NOTE: The TRIAX SPEED 10 does not have INTR mode
Set Segment 1 _ Seconds, Minutes and Hours ( 19:59' 59" maximum )

Set up to 5 segments

START interval workout. Segment begins to countdown
This example demonstrates a 7'30" run and 1'15" walk repeating workout Press STOP to pause workout.
Press START to continue workout.

99 segment loop maximum

CLEAR ALL Segments

RESET ALL Segments

In DATA mode you can review workout data saved from RUN mode

Select RUN

DATA mode records Total Time, All Lap Times, Best Lap and Average Lap
DATA mode with the PACE targets turned ON

CLEAR ALL Runs

CLEAR Selected Run

version 1

Triax SPEED 100 Battery
WARNING! Keep watch batteries away from children. If swallowed, contact a doctor immediately. WARNING! Batteries contain chemical substances. They should be disposed of properly according to local regulations.
Battery Type: CR2032 3V Lithium Battery Life: The battery is estimated to last 5 years depending on frequency and use of certain features.
Battery Replacement: If the back case is sealed, you will need to send the watch to our authorized service center. We strongly recommend you do not remove the watch back yourself. Here's why. Many of our watch designs use special gaskets that create a water tight seal between the back plate and the watch case. The greatest risk of changing the battery yourself, or having a jeweler do it, is that this gasket will not be replaced properly. In this case water damage can occur. In addition to ensuring that your watch is water tight, our service centers will clean the components and replace damaged parts. Customer feedback on the price, duration and headache of this process has prompted us to start putting user serviceable battery hatches in our watches whenever possible.