L6203UD.QX33 02.4.5 8:18 PM Page 1
FUNAI CORPORATION LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: LABOR:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.

Owners Manual

FEATURES

27 INCH COLOR TELEVISION

WF2702
Tinted, Bright Black Matrix Picture Tube 181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels. PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tuning system provides free and easy channel selection, and lets you tune directly to any channel using the channel number buttons (0~9 and +100-key) on the remote control. On-Screen Function Display. Full-Function Remote Control Sleep Timer Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. Auto Shut Off Function- If there is no air signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically. V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does not apply to any the product not purchased and used in the United States. This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY. THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED.

PRECAUTIONS

IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
Place your TV in a room with adequate ventilation. Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. Do not place your TV on soft surfaces, such as rugs or blankets. Leave enough room for air to circulate around the bottom, top and back of the set.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. To locate your nearest FUNAI Authorized Service Center or general service procedure, please call 1-800-242-7158 or write to the following: FUNAI CORPORATION Customer Service 100 North Street; Teterboro, NJ 07608 Tel :1-800-242-7158 PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

0EMN01991 Printed in Malaysia L6203UD * * * * *
The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.
Date of Purchase Dealer Phone No. Dealer Purchase from Model No. Dealer Address Serial No. This Owners Manual is made of recycled paper.
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING AFTER READING OWNERS MANUAL, PLEASE CALL TOLL FREE 1-800-242-7158.
ANTENNA/CABLE CONNECTIONS
UHF/VHF Rod Antenna (Not supplied)

VHF Antenna

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
*Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company.
CATV Box * or Satellite Box (Not supplied) FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
(Not supplied) UHF Antenna (Not supplied)

ANT.IN

ANT. IN

75-ohm Coaxial Cable

From Cable System or Satellite Antenna 75-ohm Coaxial Cable From Cable System
VHF/UHF Combiner (Not supplied)

AV input (stereo)

VHF/UHF Combination Antenna (Not supplied)
Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 82040 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

CLOSED CAPTION

This TV can receive C1 and C2 Caption and Text.

Caption Mode

(1) Closed Caption Characters can be displayed on the TV screen only when the received broadcast signal contains Caption Signals. (2) Paint-on mode: Displays input characters on the screen immediately. Pop-on mode: Once characters are stored in memory, they are displayed all at once. Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines) Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters will not be displayed.

Notes: (1) When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a VCRs video output channel (CH3 or CH4), your TV may not display the correct caption or text. (2) Captions and texts may not match the TV voice exactly. (3) Interference may cause the closed caption system not to function properly. (4) The caption or text characters will not be displayed while the menu display or functions display is shown. (5) If you see this screen:

Text Mode

(1) Displays the text on the screen by scrolling (max. 7 lines) (2) If the received broadcast signal does not contain caption or text signals, no change will occur. If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select CAPTION C1, C2 or CAPTION [OFF].
L6203UD.QX33 02.4.5 8:18 PM Page 2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE GROUND CLAMP
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS
The important note is located on the rear of the cabinet.

IMPORTANT SAFEGUARDS

1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Cleaning-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments-Do not use attachments not recommended by the TV manufacturer as they may cause hazards. 7. Water and Moisture-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories-Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. Any mounting of the appliance should follow the manufacturers instructions and should use a mounting accessory recom- PORTABLE CART WARNING mended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. S3126A AMEUBLES- Cet appareil ne doit tre plac que sur un meuble (avec ou sans roulettes) recommand par le fabricant. Si vous linstallez sur SYMBOLE D'AVERTISSEMENT POUR un meuble roulettes, dplacez LES COMPOSANTES APPAREIL ET MEUBLE A ROULETTES les deux ensembles avec prcaution. Un arrt brusque, lutilisation dune force excessive et des surfaces irrgulires risquent de dstabiliser lensemble et de le S3126A renverser. 9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 10. Power Sources-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions. 11. Grounding or Polarization-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

NEC - NATIONAL ELECTRICAL CODE

S2898A

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
12. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) 14. Lightning-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges. 15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.
18. Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance-this indicates a need for service. 20. Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22. Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

OPERATING CONTROLS AND FUNCTIONS
- FRONT PANEL VIDEO LAUDIOR MENU VOLUME CHANNEL POWER

VIDEO L AUDIO R ANT.IN

- REAR PANEL -

- REMOTE CONTROL 12 11

SLEEP DISPLAY

CHANNEL RETURN

MENU VOL

CH VOL CH MUTE

1. VIDEO (in) jack- Connect to the video output jack of a video camera or VCR. NOTE: The AUDIO and VIDEO jacks on the front panel are given priority over those on the rear panel. Suppose that the connections are already made with the rear-panel jacks and additionally with the front-panel jacks. In this case too, the input via the front ones is automatically selected. 2. AUDIO L (in) jack- Connect to the left channel audio output jack of a video camera or VCR. NOTE: The rear-panel AUDIO L (IN) jack is for mono input. The sound is heard from both speakers. Use this jack for monaural audio equipment to be hooked up. 3. AUDIO R (in) jack- Connect to the right channel audio output jack of a video camera or VCR. 4. MENU button- Press to display the menu on the TV screen. 5. VOLUME / buttons- Press to control the volume level. Press to determine the setting mode from the menu on the TV screen. (only the VOL button) Press to select or adjust from a particular menu. (for example: Language Selection, Channel Presetting, Closed Caption Selection, Picture Adjustment, V-CHIP Set Up)
6. CHANNEL / buttons- Press to select memorized channel. NOTE:You MUST PRESET channels BEFORE using CHANNEL / button. (See CHANNEL PRESETTING) Press to select the setting mode from the menu on the TV screen. Press to select item you want to adjust in the picture control mode. 7. POWER (PWR) button- Press to turn the TV ON and OFF. 8. Infrared Sensor Window- Receives the infrared control signals from the remote control unit. 9. CHANNEL NUMBER button- Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel. +100 button- Press to select cable channels higher than 99. 10.MUTE button- Press the MUTE button to turn off the sound portion of the TV program. (Volume level display turns LIGHT RED from LIGHT BLUE.) Press the MUTE button again or press the VOL(ume) or button to restore sound. 11.CHANNEL RETURN button- Press this button to go back to the previously viewed channel. For example, pressing the CHANNEL RETURN button once will change channel display from CH 3 (present channel) to CH 10 (previously viewed channel), and pressing it a second time will return from CH 10 to CH 3.
12.DISPLAY button- Press to display the channel number on the screen. If you press it again, the channel number will disappear. 13.SLEEP button- Press the SLEEP button to display the sleep timer and start the function. The shut off time can be determined by the number of times you press the button. (0, 10, 20, 30,.90, 0 minutes) 14.GAME button- Press to set the Game mode and external input mode at the same time. Press the GAME button again to exit this mode. 15.ANT(enna). IN jack- Connect to an antenna, cable system, or satellite system. 16.AC cord- Connect to a standard AC outlet (120V/60Hz). NOTE: Unwrap the AC cord completely from the backcover before plugging the cord into an AC outlet.

INSTALLING THE BATTERIES

1) Slide the battery compartment cover back on the remote unit. 2) Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the polarity (+ / -) markings. Batteries installed with incorrect polarity may damage the remote unit. 3) Replace the cover.
L6203UD.QX33 02.4.5 8:18 PM Page 3

PREPARATION FOR USE

LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the procedure below. 1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2) Press the POWER button to turn on the TV. 3) Press the MENU button so that the menu display appears on the TV screen. 4) Press the CH(annel) or button to point to "[ENGLISH]". 5) Select "ENGLISH" or "ESPAOL" = Spanish by using the VOL(ume) or button. 6) Press the MENU button to exit the menu.
PICTURE CHANNEL SET [ENGLISH]ESPAOL V-CHIP SET UP CAPTION [OFF]

CHANNEL PRESETTING

NOTE:You MUST PRESET channels BEFORE using CHANNEL or button. To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV. PICTURE 2) Press the MENU button so that the menu display appears CHANNEL SET on the TV screen. [ENGLISH]ESPAOL V-CHIP SET UP 3) Press the CH(annel) or button to point to "CHANNEL SET". CAPTION [OFF] Then, press the VOL(ume) button. 4) Press the CH(annel) or button to point to "AUTO MEMO". Then, press the VOL(ume) button. ADD/DELETE AUTO MEMO The tuner scans and memorizes all active channels in your area. STEREO [ON] The TV distinguishes between standard TV channels and cable (CATV) channels. When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen. When you press the CH(annel) or button after selecting AUTO MEMO, the tuner will stop at the memorized channels only. The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better.
[ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) or button to point to "CHANNEL SET". Then, press the VOL(ume) button. 3) Press the VOL(ume) button so that "ADD/DELETE" is selected. 4) Use the CH(annel) or button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the normal screen automatically in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen. Press the VOL(ume) or button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. Press the VOL(ume) or button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu.

ADD/DELETE AUTO MEMO STEREO [ON]

STEREO SOUND SYSTEM

This function suppresses noise, restores the dynamic range and electronically expends the stereo signal to create a more specious sound effect. 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) or button to point to "CHANNEL SET". Then, press the VOL(ume) button. 3) Press the CH(annel) or button so that "STEREO" is selected. 4) Press the VOL(ume) or button to select the stereo mode on or off. Stereo sound is effective when "STEREO" is on.
ADD/DELETE AUTO MEMO STEREO [OFF]

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatically when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV. 2) Select the desired channel with the CH(annel) or button. 3) Adjust the volume to the desired listening level using the VOL(ume) or button. 4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".) GAME MODE Set to the most suitable position for TV GAME. [+] : ON [-] : OFF BRIGHT Adjust until the darkest parts of the picture are as bright as you prefer. [+] : increase brightness [-] : decrease brightness CONTRAST Adjust to increase or decrease contrast. [+] : increase contrast [-] : decrease contrast COLOR Adjust to be brilliant or pale color. [+] : be brilliant color [-] : be pale color TINT Adjust to obtain natural skin tones. [+] : greenish tone [-] : reddish tone Notes: + is achieved by pressing the VOL(ume) button and - by pressing the VOL(ume) button. In the above steps, the picture adjustment display will disappear from the TV screen : Press the CH(annel) or button. 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) or button to point to "CAPTION". 3) Press the VOL(ume) or button to select the mode you wish. 4) When done, press the MENU button to exit the menu.
PICTURE CHANNEL SET [ENGLISH]ESPAOL V-CHIP SET UP CAPTION [ T1] PICTURE CHANNEL SET [ENGLISH]ESPAOL V-CHIP SET UP CAPTION [ T2]

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the power automatically turn off after a set time period. 1) Press the POWER button to turn on the TV and press the SLEEP button on the remote control. 2) You may change the sleep time by pressing the SLEEP SLEEP 10 button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 minutes each time the SLEEP To cancel the sleep timer: button is pushed. (The timer display counts up and sleep Press the SLEEP button repeatedtimer will be displayed on the screen when you press the ly until "SLEEP 0" is displayed. SLEEP button on remote control.) Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.
automatically after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) button so that "PICTURE" is selected. Then, press the CH(annel) or button repeatedly until the display returns to the screen. If you adjust any picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically.
[USING THE GAME BUTTON] You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. GAME appears on the TV screen. To exit the Game mode and external input mode, press the GAME button on the remote control again. To cancel the Game mode only, adjust the picture control. In this case, VIDEO instead of GAME appears on the TV screen. If you press the GAME button when the TV is off, the TV turns on and will be in the Game mode and external input mode automatically.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

[-] GAME MODE [+] OFF ON

BRIGHT

CONTRAST

: Press the VOL(ume) or button.
PICTURE CHANNEL SET [ENGLISH]ESPAOL V-CHIP SET UP CAPTION [OFF] PICTURE CHANNEL SET [ENGLISH]ESPAOL V-CHIP SET UP CAPTION [ C1]

V-CHIP SET UP

V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets or exceeds the limitations you select. In this case, "PROTECTED PROGRAM by." message appears on the TV screen. To block certain ratings, follow the steps below. Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING). You cannot access the menu when the "PROTECTED PROGRAM by." message appears. In this case, change to an unblocked channel, then press the MENU button.

PICTURE CHANNEL SET [ENGLISH]ESPAOL V-CHIP SET UP CAPTION [ C2]

PICTURE ADJUSTMENT

1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the VOL(ume) button so that "PICTURE" is selected. 3) Select the feature you wish to adjust with the CH(annel) or button and adjust it with the VOL(ume) or button.
L6203UD.QX33 02.4.5 8:18 PM Page 4

OPERATIONS (Continued)

[MPAA RATING SET UP] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) or button to point to PICTURE CHANNEL SET "V-CHIP SET UP". [ENGLISH] ESPAOL B V-CHIP SET UP Then, press the CAPTION [OFF] VOL(ume) button. 3) Press the CH(annel) or button to point to TV RATING B MPAA RATING "MPAA RATING". Then, press the VOL(ume) button. 4) Press the CH(annel) [VIEW] or button to point to B G PG [VIEW] PG-13 [VIEW] your desired item. R [VIEW] Then, press the NC-17 [VIEW] X [VIEW] VOL(ume) button to select [BLOCK] or [VIEW].
<Selection> <Rating Category Explanations> G: General Audience PG: Parental Guidance suggested. PG-13: Unsuitable for children under 13 R: Restricted; under 17 requires accompany ing parent or adult guardian NC-17: No one under 17 admitted X: Mature audience only
[TV RATING SET UP] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) or button to point to PICTURE CHANNEL SET "V-CHIP SET UP". [ENGLISH] ESPAOL B V-CHIP SET UP Then, press the CAPTION [OFF] VOL(ume) button. 3) Press the CH(annel) or button to point to B TV RATING MPAA RATING "TV RATING". Then, press the VOL(ume) button. 4) Press the CH(annel) [VIEW] or button to point to B TV-Y TV-Y7( ) [VIEW] TV-G [VIEW] your desired TV-PG( ) [VIEW] item.Then, press the TV-14( ) [VIEW] TV-MA( ) [VIEW] VOL(ume) button to select [BLOCK] or [VIEW].
<Selection> Explanations> TV-Y: TV-Y7: TV-G: TV-PG: TV-14: TV-MA:
When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) button, the sub-ratings will appear on the TV screen. If you select the rating category (example: TVPG) and turn it to [BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically. You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the steps below. When you select [TV-Y7]: Press the CH(annel) or button to select "FV" (Fantasy Violence). Then, press the VOL(ume) button to select [BLOCK] or [VIEW].

TV-Y7 FV [BLOCK] [BLOCK]

Note: When you select [TV-MA], "D" does not appear on the TV screen. The sub-ratings which set to [BLOCK] appear next to the rating category in the TV RATING menu. 5) Press the MENU button to exit the menu.
<Rating Category Appropriate for all children Appropriate for children seven and older General Audience Parental Guidance suggested. Unsuitable for children under 14 Mature audience only
When you select [TV-PG], [TV-14] or [TV-MA]: Press the CH(annel) or button to select "D" (Suggestive Dialog), "L"(Coarse Language), "S"(Sexual Situation), or "V" (Violence).
TV-PG D L S V [BLOCK] [BLOCK] [BLOCK] [BLOCK] [BLOCK]
When you select the rating category and turn it to [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically. When you turn "X" to [VIEW], then all ratings will turn to [VIEW] automatically. 5) Press the MENU button to exit the menu.
When you select the rating category and turn it to [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. When you turn "TV-Y" to [BLOCK] or [VIEW], then all ratings will turn to [BLOCK] or [VIEW] automatically. When you turn "TV-MA" to [VIEW], then all ratings will turn to [VIEW] automatically
Then, press the VOL(ume) button to select [BLOCK] or [VIEW].
TV-Y [VIEW] ) [VIEW] TV-Y7 ( [BLOCK] TV-G TV-PG (DLSV) [BLOCK] TV-14 (DLSV) [BLOCK] TV-MA ( LSV) [BLOCK]

TROUBLESHOOTING GUIDE

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save you time and money.
Poor Reception on Some Channels

MAINTENANCE

CABINET CLEANING

PICTURE TUBE CLEANING

Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect the power cord.
Remote Control Doesnt Work
Lines or Streaks in Picture

Sound OK, Picture Poor

Picture OK, Sound Poor

Picture Rolls Vertically

Ghosts in picture

Picture Distorted

QUICK SERVICE CHECK LIST

No Picture or Sound

Bars On Screen

Picture Blurred

Weak Picture

No Color

Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry. Never use a solvent or alcohol. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces.

PROBLEM

POSSIBLE REMEDY

SUPPLIED ACCESSORIES

Remote control unit (N0132UD/N0108UD) Batteries ("AA" x 2) Owners Manual
Try a new channel, if OK, then possible station trouble. Is TV plugged in? Power at outlet? Is TVs POWER button on? Is antenna connected to terminal on the back of the set? If outside antenna is being used, check for broken wire. Check for local interference. Turn off with POWER button and then turn it on after about a minute. Adjust COLOR control. Adjust CONTRAST & BRIGHT control. Check batteries in Remote Control.

SPECIFICATIONS

Sound output: 1W, 8 ohm x2

GENERAL SPECIFICATIONS

Possible Remedy

Closed Caption Problem

Television system: Closed Caption System: Channel coverage VHF: UHF: CATV: Tuning System Channel access: Terminals Antenna input:
My TV is showing captions that are misspelled.
You are watching a live broadcast and spelling errors made by the closed captioning production company may pass through uncorrected. A prerecorded program will not show any misspelled words because of the normal time available for editing the captions.
NTSC-M TV Standard 15.119/FCC 2 ~ ~ ~ 13, A ~ W, W+1 ~ W+84, A-5 ~ A-1, 5A 181 channel frequency synthesized tuning system Direct access keyboard, programmable scan and up/down

OTHER SPECIFICATIONS

Remote control: Operating temperature: Digital encoded infrared light system
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue or there is a delay of what is being said. are common for live broadcasts. Most captioning production companies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue. My captions are scrambled with white boxes on the TV screen. My program guide listed a TV show as being closed captioned but none of the captions were displayed. My prerecorded videotape does not show any captions. The tape box mentions it being closed captioned. Interference caused by building, power lines, thunderstorms, etc. may cause scrambled or incomplete captions to appear. Broadcasters may at times use a time compression process to the actual program so that additional advertising time can be given. Since the decoder cannot read the compressed information, captions will be lost. The videotape was either an illegal copying or the tape duplicating company accidentally left out the captioning signals during the copying process.

5C to 40C (41F~104F) Power requirements: AC120V, 60Hz Power consumption (Maximum): 110W Picture tube: 27" Dimensions: H : 22-1/16 (560mm) W: 26 (660mm) D : 19-11/16 (500mm) Weight: 77.2 lbs. (35kg) Designs and specifications are subject to change without notice. If there is a discrepancy between languages, the default language will be English.
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION channels. [OFF].
As an ENERGY STAR Partner, our company has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.
VHF/UHF/CATV 75 ohm unbalanced (F-type) Video input: RCA connector x 2 (1 x Front / 1 x Rear) Audio input: RCA connector x 4 (2 (L/R) x Front / 2 (L/R) x Rear) Stereo Sound System 2 speakers
ELECTRICAL SPECIFICATIONS