Motorola DTA100 - Quick Start Guide, size: 391 KB
Here you can find all about Motorola DTA100 like remote codes and other informations. For example: hack, remote, for sale, slingbox.
Motorola DTA100 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Motorola DTA100 please write about it to help other people.
[ Report abuse or wrong photo | Share your Motorola DTA100 photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Digital Transport Adapter
Quick Start Guide
Before You Begin
READ THIS FIRST Connecting Your DTA100 1. Connect the DTA100 to your cable service. Connect the coaxial cable from your wall outlet to the connector on the back of the DTA100 labeled Cable In. Connect the DTA100 to your A/V equipment. Refer to the illustrations in this guide to connect the DTA100 to your TV and other A/V components. Turn on the DTA100. Plug the DTA100 power cord into the receptable on the back of the unit. Plug the other end into a non-switched wall outlet. The DTA100 will turn on automatically. (Optional) Connecting the Remote Extender. If you wish to place your DTA100 out of view, you can afx velcro squares to the two mounting squares on the bottom of the DTA100. Once in place, you can use the velcro squares to attach the DTA100 to the back of the TV or within the entertainment system. When you place the DTA100 out of view, you must use the Remote Extender for the DTA100 to receive commands from the remote control. Insert the connector of the Remote Extender into the IR IN port and position the opposite end of the Remote Extender in view of the remote control (e.g. attached to the top of the TV). 5. Tune your TV to Channel 3 or 4 Turn on your TV and ensure that it is tuned to either channel 3 or 4. On the back of the DTA100, ensure that the Ch 3/4 switch is set to the same channel as your TV. Enjoy your new services!
Important: If your TV screen is blank or you have no sound, you may have mixed the cable connections. After plugging a cable into the Cable In or To TV connector, be sure to plug the other end of the cable into the corresponding connector on your TV or other A/V component. Important handling and installation instructions Install the terminal away from heat sources such as radiators, heat registers, and stoves. The air surrounding the terminal should not exceed 40C (104 F). Do not place the terminal in an enclosed area where the cooling vents are blocked or impede the ow of air through the ventilation openings. Position the unit with at least 3 inches of space on all sides. Place the terminal on a at surface not prone to vibration or impact. Do not install the terminal in an area where condensation occurs.
DTA100 Quick Start Guide
Congratulations on receiving a Motorola DTA100 Digital Transport Adapter. Connection Options The DTA100 transport adapter supports the RF out (coaxial) video/audio connection. This connection supports Standard-Denition video and audio.
Connecting Your Device
Connecting an SDTV
1. Connect a coaxial cable from the cable wall outlet to the Cable IN connector on the DTA100. Connect a coaxial cable to the To TV connector on the DTA100 and the Cable / Antenna IN on the TV.
Connecting an SDTV and VCR/DVD Recorder
1. Connect a coaxial cable from the cable wall outlet to the Cable IN connector on the DTA100. Connect a coaxial cable to the To TV connector on the DTA100 and the Cable / Antenna IN on the VCR/DVD Recorder. Connect a composite video cable from the Video Out connector on the VCR/ DVD Recorder to the Video In connector on the TV and a stereo audio cable from the Audio L / R Out connectors on the VCR/DVD Recorder to the Audio Left In and Audio Right In connector on the TV. or Connect a coaxial cable to the To TV connector on the VCR/DVD Recorder to the Cable / Antenna IN connector on the TV.
Connecting an A/V Receiver, SDTV, and VCR / DVD Recorder
1. Connect a coaxial cable from the cable wall outlet to the Cable IN connector on the DTA100. Connect a coaxial cable from the To TV connector on the DTA100 to the Cable / Antenna IN connector on the VCR/DVD Recorder. Connect a composite video cable from the Video OUT connector on the VCR / DVD Recorder to the VCR Video IN connector on the A/V Receiver and a stereo audio cable from the Audio L / R OUT connector on the VCR / DVD Recorder to the VCR Audio L / R IN connector on the A/V Receiver. Connect a composite video cable from the TV / Monitor VIDEO OUT connector on the A/V Receiver to the Video IN connector on the TV and a stereo audio cable from the TV / Monitor AUDIO L / R OUT connectors on the A/V Receiver to the Audio Left and Audio Right connectors on the TV.
Before calling your service provider, review this troubleshooting guide. This information is to help you quickly solve a problem. If your problem still exists, contact your service provider.
Problem The DTA100 will not power on Possible Solution Verify whether the DTA100 is powered on by looking at the POWER icon on the front of the DTA100. If it is lit green, the DTA100 is powered on. If the DTA100 is connected to a switched outlet, verify the switch is turned on. It is recommended to use an unswitched outlet, if possible. Verify that the AC power cord of the external power supply is connected to the DTA100 and an AC outlet. Unplug the DTA100 from the AC outlet, and then plug it back in. Verify that the remote control is in Cable mode, and turn the DTA100 on by pressing the POWER key. Verify that the remote control is in Cable mode. Verify that there are no obstructions between the remote control and the DTA100. Aim the remote control directly at the DTA100 front panel or the Remote Extender, if connected, not the TV or VCR. The angle between the remote control and the DTA100 may be too large. Stand in front of the DTA100 and not too far to either side. Press and release operation keys one at a time, rmly and deliberately. Check the batteries in the remote control. Install new batteries if needed. Verify that the TV is powered on and set to the appropriate channel (3 or 4) for the DTA100. Verify that the DTA100 is powered on and tuned to an authorized cable channel. Verify that the coaxial cable between the DTA100 and the TV is rmly connected. Verify that the coaxial cable feed is rmly connected to the DTA100 and the wall jack. Verify that the mute button on the remote control has not been pressed. Press MUTE on the remote control to restore sound. If the DTA100 audio output is connected to the TV, verify that the Mute button on the TV has not been pressed. Verify that closed captions are enabled on the TV. Note: Closed captioning may not be available on the current program.
The remote control does not work
There is no video on the TV screen
There is no audio when viewing cable channels No closed captions display
Motorola, Inc. www.motorola.com MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. Motorola, Inc. 2008 556788-001-a 11/08 This device is ENERGY STAR qualified when connected to a digital video service. The Service Provider is responsible for completing the ENERGY STAR Partnership Agreement prior to deploying any Set-top device with an ENERGY STAR label, or claiming to provide ENERGY STAR qualified Set-top devices in advertising or promotional materials.
DIGITAL TRANSPORT ADAPTER
The Motorola DTA100 Digital Transport Adapter gives service providers a cost-effective means of realizing the benefits of an all-digital network. It makes it possible for video service subscribers to keep watching their analog TV(s) even when connected to an All-Digital cable network which allows the service provider to recover analog bandwidth in order to launch additional, enhanced digital services such as HDTV. Consistent with the current analog subscriber's experience, the Motorola DTA100 features unidirectional functionality, a single in-band tuner, standard definition decoding capabilities, and a basic user interface for accessing one-way digital services.
Single MHz All-Digital Tuner Full Inband DSM-CC Support for Code Download One-Way Device Front Panel IR Receiver and Power LED RF Remod Output RF Remod Channel 3 / 4 switch External IR input External high-efficiency Power Supply Basic User Interface Channel number and Call-Sign display Volume/Mute status
www.amt.com www.amt.com www.amt.com
Advanced Media Technologies, Inc. 3150 SW 15th Street. G, Deerfield Beach, FL 33442 Advanced Media Technologies, Inc. 720 South Powerline Road, SuiteDeerfield Beach, FL 33442 (888) 293-5856 (954) 427-5711 Fax (954) 427-9688 (888) 293-5856 (954) 427-5711 Fax (954) 427-9688
G12LH Linea 198 Spirit 710 GXT300 Touch Full FAX-207 SC-7S1 UX-F4CL PL-888Z Kala 6523 Twister For Sale AWW1217 Ypg-225 Navsoon 385 IC-M601 AL-1661CS SA-W10H Icom SM-6 26PF5321D Dwl-G520 ES150P MB-373NS SGH-D880 DV-TR11 EWF14780W MX-200 Dynax 5000 MX850 PCM-R500 X363DN 10 8-LI SU-810 Suite 10 2408 Mkii FT-1000MP NW-E50 Celsius H250 Squad Finepix F485 Videostudio7 DVP3264 SRU1020 Convertible 2003 FZS1000-2005 Street Psae0 To Hell DSC-P30 GPS 95XL PV-DV203D DCR-TRV890E YP-U3QBD Sunbeam 5890 Remote Doro 131 WFE1261K DC300 Premia DX6490 180IS-MB5 Seicento MWV961combi Es30 Elura 65 F5D7330 Monitor PM4000 French MAX-B450 Simulator DB338RB SC-AK320 Hack GZ-MG610 Array CLP-315K BQ-390 PSC 1310 KDC-7080R CRT51 Explorist 610 Hdi 138 HCD-S500 XVS650AL Triceratops P4S61 KRC-559R Presario 700 PM 290 Slingbox Nikon D700 Morrowind N620C KX-FP141G EWT9120W KDL-32S2030 Expansion Pack 3006C-3010C CE2977N EX-P505 CS-99A EWR20V5 MS103HCE
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101