VentiIation-SIots and openings in the cabinet are provided for ventilation and to ensure reIiabIe operation of the unit and to protect it from overheating, and these openings must not be bIocked or covered. The openings should never be blocked by pIacing the unit on a bed, sofa, rug,or other similar surface. This unit should not be pIaced in a built-in instaIIation such as a bookcase or rack unIess proper ventilation is provided or the manufacturer's instructions have been adhered to.
Wide bIade Lame Iarge Cuchilla ancha
Alternate Warnings -This plug wiIl onIy fit into a grounding-type power outIet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug.
Heat-Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampIifiers ) that produce heat.
Accessories -Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may faII, causing serious injury to a chiId or aduIt, and serious damage to the unit. Use onIy with a cart, stand, tripod, bracket, or table recom mended by the manufacturer, or accessory re commended by the manufacturer, or soId with the TV set, and shouId use a mounting accessory recommended by the manufacturer.
Overloading -Do not overload waIl outlets, extension cords or integraI convenience receptacIes as this can result in fire or electric shock.
A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn. Lightning-For added protection for this unit during a lightning storm, or when it is Ieft unattended and unused for long periods of time, unpIug it from the waIl outlet and disconnect the antenna or cabIe system. This wiIl prevent damage to the product due to lightning and power-line surges.
Power-Cord Protection-Protect the power cord from being walked on or pinched particularly at p l u g s , c o n v e n i e n c e r e c e p t a c l e s , a n d t h e p o i n t where they exit from the apparatus.
Object and Liquid Entry-Never push objects of any kind into the unit through openings as they may touch dangerous voItage points or short-out parts that couId resuIt in a fire or eIectric shock. Never spill liquid of any kind on the unit.

Precautions (continued)

Cleaning-Unplug the unit from the walI outlet before cIeaning or poIishing it. Do not use liquid cleaners or aerosoI cIeaners. Use a dry cIoth for cleaning the exterior of the unit. Damage Requiring Service - Unplug the unit from the waIl outlet and refer servicing to qualified service personneI under the folIowing conditions: a. lf the power cord or plug is damaged or frayed.

Playable discs This unit can play back the following discs.

Disk Mark DVD video disc

Contains Audio + Video (moving pictures)

Disc Size

Maximum playback time Approx. 4 hours (single sided disc)
Notes on regional numbers DVDs are divided into separate regions. The United States and Canada are designated as region 1 DVD. Your unit plays region 1 DVDs only.
Approx. 8 hours (double sided disc) Approx. 74 minutes

12cm Audio CD Audio

8cm Approx. 20minutes (CD single)

CONTENTS

lNTRODUCTlON Features.....10 ControI Buttons.....11 INSTALLATION To Connect the Antenna....14 Remote Batteries....14 To Connect ExternaI Equipment.... TV FUNCTIONS Power On/Off..... 17 Menus..... 17 Tuning in.... 18 Function SeIection.... 18 GeneraI Operation.... 20 Time Setting.....21 Picture Improvement....22 Childlock.....22 Sound Improvement....23 DVD FUNCTIONS MP3 Operation.....24 Playing Back a Disc....25 Locating a Specific Title, Chapter or Track....28 Zooming a Picture.....30 Selecting the Camera Angle/Language/Audio Settings...31 Playing in a Favorite Order.... 32 Selecting Subtitles.... 33 Playing Repeatedly..... 33 Playing Back Yor KODAK Picture CD....34 Playing Your JPEG Files....35 Using the On-screen Display..... 36 Setting the Parental Lock....37 Customizing the Function Settings....38
SPEClFICATIONS.....39 TROUBLESHOOTlNG GUIDE....40 TV / DVD Combo Warranty Information....41
Note: The OSD and illustration in this manuaI may be somewhat different from the actual situation. PIease take the unit as the standard.

INTRODUCTION

Features
True FIat Picture Tube Delivers real pictures, which ensures that you can watch sharper and more natural pictures. By adopting the invar shadow-mask, the tube increases the transparency and reduces thermal deformation, which greatly improves the picture stability and delivers more vivid pictures. English/French/Spanish Menus The unique English/French/Spanish menu control function makes the operation more easily. 181 Channel Tuner 2-69 channels in the Air mode and 1-125 channels in the Cable mode can be preset (of which 2-13 channels in the Air and Cable modes are the same.) DVD/CD/MP3/KODAK Picture CD Support AV/S-VIDEO/AC-3 TerminaIs for ExternaI Equipment Connection On/Off Timer The TV automatically turns off and on and tunes to the desired channel at the time when programmed. Auto Off Under no signal condition, the TV will turn off in15 min. Childlock Function Prevents children from watching TV for a long period of time. Especially when parents are out. Parental Control Prevents children from watching programs not suitable for them. Quick Selectable Picture/Sound Modes Allows one-touch selection of your favorite picture and sound quality among three picture modes and four sound modes. CCD /Text Function If they are included in a program, you can view closed captions or text information. Correction Technology Reduces picture noise and improves color quality. Black Level Stretch The black level stretching circuit enhances the picture gradation. DigitaI Geometric Correction The TV adopts digital geometric correction with no mechanic adjustment, which offers the TV reliablity. Channel Scan Displays all channels set in the Add mode. MTS Stereo AVC - Auto Volume Correction

Auto-degaussing

Color TV is easily affected by magnetism which leads to color distortion. If your unit is moved or affected by near magnetic components or appliances with power on, please power off your unit for at least 1 hour. The built-in autodegaussing circuit will eliminate the magnetism interference.
To Connect the Antenna An outdoor antenna or CATV is recommended for the best reception.

75-ohm coaxial cable

VHF UFH or Cable
OR 300-ohm twin-lead cable
Antenna adapter (not supplied)

U/V mixer (not supplied)

Notes: 1 It is recommended that a 75 coaxial cable be used in order to eliminate possible interference and noise which may occur due to nearby radio transmissions. 2 The antenna cable should not be tied together with other wiring. 3 Set up a lightning arrester and check it regularly when an outdoor antenna is used.

Remote Batteries

Remove the battery compartment lid. Place in two AAA batteries. Make sure the positive + and negative - polarities are correct. Reattach the battery lid.
Notes: 1 Alkaline batteries are recommended for longer life. Always replace both batteries with fresh ones of the same type. 2 Do not expose batteries to fire or disassemble them. 3 To avoid battery leakage, remove batteries from the remote control when it is not to be used for a long period of time or the batteries are exhausted.

INSTALLATION (continued)

To Connect External Equipment
The following are optional connections.Refer to operation manuals of external equipment that will be connected to your unit.
Connect VCR' s or DVD player' s RF OUT terminal to the ANTENNA IN jack located on the rear panel.
RF IN Coaxial Cable VCR with RF Modulator ANTENNA IN

AUDIO/VIDEO OUT

With S-VIDEO Terminal VCD Player AV IN VIDEO Yellow Camcorder White Red AUDIO Yellow White Red AN IN on the rear panel
VIDEO AUDIO/VIDEO IN Yellow White Red VCR AUDIO Yellow White Red AN OUT on the rear panel

on the remote control to enter the
Auto off when no signal received When a channeI has no signaI (e. g. the program is over) and if no button is pressed within 15 minutes, the TV wiIl automatically enter the Standby mode. If the Off Time is preset and the time left is less than 15 minutes, the TV will carry out the Off Time program prior to the auto-off.
Press the MENU button, and the TV will display the primary menu as right: To adjust a function, press the CH-/ + buttons to highlight the selection, and press the VOL -/+ buttons to call up a sub-menu. (Take English menu for example).
Picture Tint Brightness Contrast Color Sharp 32 Audio 31 Bass Treble 31 Balance 00 Surround On AVC Off MTS Stereo [S]O) Tuner Channel Add/Erase Antenna Auto Program 2 Add Air Menu Picture Audio Tuner Timer System
Timer Timer On Time On Channel Off Time MPAA - Off

System

Language Blue Back CCD/Text Parental Guide Eng. Fra. Esp. On Off On TV - Off
After selecting a sub-menu, press the CH-/+ buttons to highlight the desired item and press the VOL-/+ buttons to adjust. MENU display except Tuner disappears 6 seconds after last selection. Notes: 1 After calling up the sub menu, pressing the MENU button can return to the primary menu display. 2 The adjustable Tint ragne in the Picture menu and Balance range in the Audio menu are -31~+31 and L31~R31 respectively while the other adjustments are 0 ~ 63. 3 When the Tuner menu is recalled, the display will not disappear automatically. Press the DISPLAY button on turn off the menu display. In the following function introductions, the operations are similar to the above ways unless otherwise noted.

TV FUNCTIONS (continued)

Tuning in
This section gives descriptions about adjustment of items in the Tuner menu. 1.Auto program 1) Press the CH-/+ buttons to highlight Auto Program. 2) Press the VOL+ button, and the TV will search automatically in sequence. After auto search, the TV will store receivable channels and return to the lowest channel number. During auto program, press the VOL- button to stop searching.
Channel Add/Erase Antenna Auto Program

2 Add Air

Notes: 1 After auto program, there may be some repeated channels or inferior signal received. In thes case,press any of the VOL- / + , Channel Number buttons to select one of the channels. Then set Add/ Erase to Erase so that pressing the CH - / + buttons can not caII up the channeIs. To resume the channeIs, set Add/Erase to Add in the way mentioned above. 2 When Antenna is set to the Air mode, the TV wiII auto search from channel number 2 to 69; when set to the Cable mode, it wilI auto search from 1 to 125 (of which 2 -13 channeIs in the Air and CabIe modes are the same.) 2.Channel selection Press the CH-/ + buttons to highlight Channel in the Tuner menu, and press any of the VOL- / + ,Channel Number buttons to select channel numbers. 3.Add/Erase selection Press the CH-/ + buttons to highlight Add / Erase, and press the VOL - / + buttons to select Add or Erase cyclically.

Picture Improvement

1.To seIect picture modes

PICTURE

Press the PICTURE button repeatedly to seIect one of the Normal, Memory and Theater modes. NormaI Memory Theater
Refer to the foIIowing introduction about each mode. Mode Normal Memory Theater Picture Quality Standard mode, suitable for watching ordinary program. Picture quality users set. Movie-like picture setting, suitable for viewing some movie programs.
2. To set desired picture quality 1) Call up the Picture menu and the TV screen is displayed as follows.
Picture Tint Brightness Contrast Color 32
2) Press the CH- / + buttons to choose an adjustment.
3) Press the VOL-/+ buttons to adjust the digitaI leveI of the selected adjustment as desired. The adjusted Ievel is stored in the MEMORY position and remains unchanged until next adjustment.
Picture Quality Item Press the VOL-button Tint Brightness Contrast Color Sharp Purplish Darker Lower Paler Softer Press the VOL-button Greenish Brighter Higher Deeper Sharper

Childlock

The CHlLDLOCK function prevents chiIdren from watching TV. HoId down the F button and then press the MUTE button until the symboI appears on the screen, and the TV enters the CHlLDLOCK mode. Except for the symboI you press the , the screen becomes blue back and mutes when buton to turn the TV off, then turn the TV on after setting the
CHILDLOCK function. To unlock the TV, hoId down the F button and then press the MUTE button again. Note: The CHlLDLOCK can be set or cancelIed only by the remote controI. After setting CHlLDLOCK, secure the remote control in a safe place.

Sound Improvement

1. To seIect sound modes SOUND Press the SOUND button repeatedIy to seIect one of the Speeh, Music, Theater and Memory modes. Speech Music Theater Memory
Refer to the foIIowing introduction about each mode.
Mode Speech Music Theater Memory
Sound Quality Language clarity improvement, suitable for program focusing on dialogue Suitable for enjoying music programs Movie-like sound setting, suitable for enjoying dynamic sound, such as programs of entertaninment Sound quality users set
2. To set desired sound quaIity 1) Call up the Audio menu.
Audio Bass Treble Balance Surround On AVC Off MTS Stereo [S] O) 30
2) Press the CH-/+ buttons to select an adjustment. 3) Press the VOL- /+ buttons to adjust the digital Ievel of the seIected item as desired. The adjusted Ievel is stored in the Memory position and remains unchanged untiI next adjustment.
Sound Quality ltem Press the VOL- button Bass Treble Balance Surround AVC MTS Weaker Weaker Decrease the right volume On,Off On,Off Refer to Stereo selection. Press the VOL+ button Stronger Stronger Decrease the left volume

DVD FUNCTIONS

MP3 Operation
Playing an MP3 format 1.To play you must view through your television. Insert an MP3 CD, the DVD player will initialize the disc when the tray is closed and the directory (folder) will be shown in an MP3 MENU on screen. 2. Press / twice to select and highlight the PLAY MODE. Then press / each way to select play mode options (repeat, shuffle, etc.) Then press / twice then press the / button to select and highlight an MP3 file (song). Press OK to highlight your list of songs.

Playing Back a Disc (continued)
4. How to start playback from the menu screen 1) Press / / / or the Number buttons to select the title.
2) Press the OK button. The DVD player will start playback from the title selected.
5. How to pause playback (still playback) Press the PAUSE during playback. Press the PAUSE button to resume normal playback. 7. How to remove the disc Press the OPEN/CLOSE button.
6. How to stop playback Press the STOP button. The DVD player is stopped. Press the PLAY or RESUME button to replay. Press the STOP button twice.
Wait until the disc tray is completely open before removing any discs. After removing the discs, press the OPEN/CLOSE button to close the disc tray.
Note: At the completion of each movie a menu screen will appear. Be aware that the on-screen setup menu may damage your TV by permanently burning that image onto the screen. To avoid this, press the STOP button at the completion of each movie. You may also decide to setup the SCREEN SAVER.
8. Playing in slow-motion A disc can also be played back in slow-motion.
Press the SLOW button during playback The playback speed becomes 1/2, 1/4, or 1/8 of the normal speed each time you press the SLOW button. (Reverse slow play as the same.)
Notes: 1 During the slow-motion playback, the sound is muted. 2 MP3 CD/CDDA does not utilize this feature.
9. Playing at 2X 4X 6X or 8X the normal speed You can play back a disc at 2X, 4X, 6X or 8X the normal speed. Press the REV or FWD button during playback. The playback speed becomes 2X the normal speed. The playback speed changes each time you press the REV or FWD button. REV: Fast reverse FWD: Fast forward
Audio CD The reverse of forward playback alternates between 1X, 2X, 3X, 4X speed. Notes: 1 The DVD player will not playback sound and subtitles during scan reverse and foward playback of DVD video discs and audio CDs. The DVD player will play sound during fast forward or fast reverse playback of MP3 CDs. 2 The speeds may vary slightly from disc to disc and are only approximate. 10. Resuming playback from the same location This DVD player allows you to stop playback and continue playback later from the same location on the disc. 1) Press the STOP button. This will interrupt the playback and the DVD player will memorizes the location where you stopped playback. 2) Press the PLAY/PAUSE or RESUME button. The DVD player will resume the playback from the location where you stopped playback. Notes: 1 The following actions will cancel the RESUME function: - Unplugging the unit after you stop playback. - Ejecting the disc. - Adjusting/changing the parental lock or selecting a different language setting. 2 On occasion depending on the disc, you may experience a difference of location where playback resumes. 3 MP3 CD does not utilize this feature.

Locating a Specific Title, Chapter or Track
THE DVD VIDEO DISCS ARE NORMALLY DIVIDED INTO TITLES. THE TITLES ARE SUB-DIVIDED INTO CHAPTERS. MOREOVER, AUDIO CD and MP3 CD ARE DIVIDED INTO TRACKS. YOU CAN CONVENIENTLY LOCATE ANY SPECIFIC TITLE, CHAPTER, OR TRACK WITH THIS UNIT.
Chapter1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Track 1 Track 2 Track 3 Track 4 Track 5

TITLE 1 DVD Video Disc

TITLE 2 Audio CD
1. Locating a title using the title menu You can locate a specific title using the title menu function, if a DVD video disc contains a title menu. 1) Press the TITLE button. On the TV screen, the title menu will appear. 2) Press the you want. You can also directly locate a specific title by pressing its assigned number with the Number buttons. 3) Press the OK button. This will cause the unit to start playback from chapter 1 of the title selected.

Example of a title menu.

Title 3 Title 4

buttons select the title

Title 1

Title 2

Notes: 1 You may find that some discs will not respond to this function. 2 If different instructions appear on the TV screen, follow those instructions. The instructions above are descrbing the basic procedure where the procedures may vary depending on the contents of the DVD video disc.
2. Locating a spectific chapter or track This unit allows you to locate consecutive chapters or tracks. Press the PREV or NEXT button repeatedly to display the requested chapter or track The DVD player starts playback from the selected chapter or track. How to locate proceeding chapters or tracks When you press the PREV button, the DVD player starts playback from the beginning of the proceeding chapter or track. How to locate succeeding chapters or tracks When you press the NEXT button, the DVD player starts playback from the beginning of the succeeding chapter or track. Note: On some discs the titles may not display the sub-divided chapters.
Locating a Specific Title, Chapter or Track (continued)
3. Locating a title If a DVD video disc contains title numbers, you can locate a specific title by directly selecting a title number. 1) Press GOTO during playback. Make sure that the space next to TITLE is highlighted. GOTO

2) Press the Number buttons to select the title and chapter you want.

e.g. To select title 2

To select title 16:

To select title 26:

3) Press PLAY/ PAUSE or OK button. Notes: By pressing / / / OK you may shift the highlights between the TITLE and CHAPTERS. To select the time, you can press the GOTO twice.

Zooming a Picture

Zooming a picture This DVD player allows you to zoom into a picture as well as shift the zoom point.
Press ZOOM during normal playback or slow-motion. The DVD player magnifies in the center of the picture.

ZOOMx1.5

ZOOMx2

ZOOM OFF

ZOOMx3

If you press

during zoom playback, the zoom point shifts.
TO RESUME NORMAL PLAYBACK. Press ZOOM during zoom playback.

Vocal Assist

Vocal cancel: Eliminates the vocal sound from the music recorded in a disc. The vocal cancel function may not work on some discs. VOCAL
Selecting the Camera Angles / Language / Audio Settings
THIS UNIT ALLOWS YOU TO SELECT FROM SEVERAL DIFFERENT ANGLES AND LANGUAGES.

ANGLE 1 ANGLE 2

Good evening

Bonsoir

Buenas tardes
Selecting the camera angle Selecting a language
1. How to change the camera angle Press the ANGLE button while playing back a scene recorded with multiple angles. You may only press the ANGLE button when the angle icon is flashing on the DVD display. Each time you press the ANGLE button, the angle will change. Notes: 1 The angle function will not work on DVD video discs that do not contain recorded multiple angles. 2 During still playback, you are able to change the camera angle. Hower, when you resume to normal playback, the camera angle changes to the new settings. 3 The angle icon indicator will illuminate while playing back a title that contains at least one scene recorded from multiple angles. 2. How to select a playback audio setting This DVD player allows you to select a preferred language and sound recording system from those included on the DVD video disc. 1) Press the AUDIO button during playback.
AUDIO 1/ 3 : AC-3 5.1 EGLISH Language AUDIO 2/ 3 : AC-3 5.1 FRENCH
2) Press the AUDIO button again to cycle backwards.
AUDIO 3/ 3 : AC-3 5.1 SPANISH Total Audio Channels Current Audio Position AUDIO 1/ 3 : AC-3 5.1 ENGLISH

Recording systems This DVD player uses the MPEG 2, PCM and DTS recording systems. It cannot playback DVD video discs recorded in any other recorded format. Notes: 1 The DVD player returns to the initial default settings when you turn on the DVD player or replace a disc. 2 The DVD player plays the prior sound programmed on the disc when you select a format which is not included on the disc.
Playing in a Favorite Order
COMBINE YOUR FAVORITE TITLES, CHAPTERS, OR TRACKS AND PLAY THEM BACK IN ANY ORDER. PROGRAM UP TO 99 ITEMS INTO THE MEMORY. (PROGRAM PLAYBACK) How to set titles. chapters, or tracks in a favorite order The program playback function will automatically playback titles, chapters or tracks in the order preprogrammed. 1. Insert a disc during normal playback, press the STOP twice, then press the PROGRAM
At this time, the menu will appear.

PROGRAM P 00: TOO C000

PROGRAM SCAN
2. Using the numbered button, select the items in the order you want them programmed in.
Memory 1 PROGRAM P01: T01 C004

Memory 2

PROGRAM

P02: T01 C009

Memory 3

P03: T01 C001

Memory 4

P04: T01 C003

TO CHANGE the programmed item: Press the STOP button, then press PROGRAM. TO CANCEL the programmed item:
3. Press the OK button once to confirm. Press it again and playback begins. The DVD player starts memory playback. OK
Press the STOP button, then press PROGRAM,at last press PLAY/PAUSE
Notes: 1 When the DVD player is turned off, or if the discs are removed, the program item will be removed. 2 Depending on the disc, the program playback may not function.

Selecting Subtitles

THIS UNIT ALLOWS YOU TO DISPLAY THE SUBTITLES FROM THOSE INCLUDED ON THE DISC, ON TO YOUR TV SCREEN.
How to display subtitles You have the option to select a preferred subtitle from those included on the DVD video disc.
Press the SUB-T button during playback.
SUBTITLE 1 1/03 2/03 3/03 ENGLISH SPANISH FRENCH

SUBTITLE 2 SUBTITLE 3

Notes: With some DVDs, you may not be able to turn off the subtitles and they will appear on screen automatically. As you press the SUB-T button, the subtitles may not appear immediately during

SUBTITLE OFF

To TURN OFF the subtitles.
some scenes. If the subtitles continue to show on your TV even after the DVD has been turned off, please refer to the TVs close caption settings.
Press the SUB-T during playback until the subtitles disappears.

Playing Repeatedly

THIS UNIT ALLOWS YOU TO PLAYBACK A SPECIFIC TITLE, CHAPTER, TRACK, OR SEGMENT REPEATEDLY. (TITLE REPEAT, CHAPTER/TRACK REPEAT).

CHAPTER REPEAT ON

Repeats the same chapter.
How to repeat a title, chapter or track 1.Select the title, chapter, or track you want to repeat. 2.Press the REPEAT button. The repeat mode changes each time you press the REPEAT button.
DVD video disc TITLE REPEAT ON REPEAT OFF
Repeats the same title. Resumes normal playback.
Playing Back Your KODAK Picture CD
1. NOrmal When a KODAK Picture CD is inserted, an automated slide show is launched. Each picture in the current directory will be displayed consecutively in a slide-show fashion and will be scaled to fit most of the TV screen. Twelve slideshow transition modes are provided. Use RESUME button to select: Customers can set transition effects for every picture at any time during the slideshow.
mode 0: no special transition effect (by default) mode 1: wipe from top to bottom mode 2: wipe from bottom to top mode 3: wipe from top/bottom to center mode 4: wipe from center to top/bottom mode 5: vertical blind mode 6: wipe from left to right mode 7: wipe from right to left mode 8: wipe from left/right to center mode 9: wipe from center to left/right mode 10: wipe from edge to center mode 11: horizontal blinds mode 12: random
To display an image indefinitively, press the PAUSE button. To view the Next or Previous picture press the NEXT or PREV button. To resume the slideshow press the PLAY button. 2.Image rotation There are four modes to transformation: Invert, Mirror, Left, and Right. These operations are allowed only when a picture is being displayed normally, and will be cancelled automatically when a new picture is displayed. The arrow buttons are used to select the different transformation modes: UP Down Left Right 3. Menu The D-MENU button is used to display thumbnail pictures. From the stop position, press the D-MENU button. After it is enabled, up to nine scaled-down thumbnails pictures will be displayed on the screen. The NEXT and PREV buttons can be used to display the NEXT and PREVIOUS nine pictures in the current directory. Note: You can use the / / / / OK buttons to select. -Invert / Normal -Mirror / Normal -Turn left -Turn right

Playing Your JPEG Files

1. Normal Slide Show Presentation When a JPEG disc is loaded into the player, a menu will appear on screen. From the Play Mode shown on the menu, select the FOLDER option using your direction buttons. Each picture in the current directory will be displayed consecutively in a slideshow presentation and will be seated to the most of your TV screen. Twelve slideshow transition modes are provided. Use RESUME button to select. Note: From the playmode shown on the menu you may also select the SINGLE option to view a picture indefinitely until NEXT, PREV, or PLAY button is selected. 2. Image rotation There are four modes to rotate a picture: Invert, Mirror, Left, and Right. These operations are allowed only when a picture is being displayed normally, and will be cancelled automatically when a new picture is displayed. The arrow buttons are used to select the different rotation modes: UP Down Left Right 3. Zoom This features allows you to view a picture at 25%-200% in several increments. Press the ZOOM button. An on screen message (Zoom On) will verify your selection. Use FWD and REV buttons to control the amount of zoom in and out. Press the direction buttons to move the picture in any direction. With Zoom Off, the picture is scaled to fit most of your TV screen. Note: When in the ZOOM mode, the slideshow transition and image transformation features are disabled. 4. Menu The D-MENU button is used to display thumbnail pictures. From the stop position, press the D-MENU button. After it is enabled, up to nine scaled-down thumbnails pictures will be displayed on the screen. The NEXT and PREV buttons can be used to display the NEXT and PREVIOUS nine pictures in the current directory. Each of the nie pictures are numbered from 1-9. By pressing a Number button, the corresponding picture will be enlarged to fill most your TV screen and the digest mode will be cancelled. -Invert / Normal -Mirror / Normal -Turn left -Turn right
Using the On-Screen Display
THE UNIT ALLOWS YOU TO VIEW THE OPERATION STATUS AND DISC INFORMATION ON THE TV SCREEN.
Checking the operational status With this function you can view the following on the TV: - Current title - Track number - Total playing time Press DISPLAY during playback

Designs and specifications are subject to change without notice.

TROUBLESHOOTING GUIDE

Check the following guide for a possible correction to a problem before contacting customer service. Check FAQ at our website: www.apexdigitalinc.com. Symptoms and Correction Symptoms No power Correction Connect the power plug into the wall outlet securely. Verify the connection from the DVD/VCR video output to the TV video input is secure.Then switch TV to the appropriate Video mode. Verify coaxial cable from antenna is connected to RF IN. Connect the audio cables into the terminals securely. Verify the connection from the DVD/VCR audio output to the TV autio input. Then switch to the appropriate mode on the receiver. Refer to your audio amplifier owner's manual. Mute feature may be enabled. Check whether your receiver is set to the TV mode. Check whether the antenna is well connected to the TV receiver. Unplug the TV from the wall for 30 seconds, then plug in and try again. Unplug the antenna connection from the back of the TV, unplug the TV from the wall, wait 30 seconds, then try again. Interference may come from high frequency sources such as a broadcasting station, poor ground connection in cable used, or non shielded audio speakers too close to the picture tube. Check the antenna lead wire to see if it has open circuit or not. Check the connection of antenna lead wire to the TV set input. Check whether there is any damage to antenna. Change the direction of antenna to minimize the multi image. The video frequency radiated from TV station can be reflected by tall buildings, high tower, etc. Make sure the Air/Cable setting is correct. Channel may be locked with the block channel feature, such as Parental Control. Check Add/Erase feature, as channel may have been erased during set up. Closed Caption to Text feature may be active. Batteries may be weak. Replace batteries. Make sure remote sensor is not blocked including deflection from curved glass cabinet. What youre viewing may be effect of the copy protection circuitry required on all DVD players. Change another disc, and try again. Place the disc with the graphics side up. Place the disc on the disc tray correctly inside the guide. Make sure the disc is free from scratches & fingerprints. Press the SETUP button to turn off the menu screen. Cancel the parental lock function or change the parental lock level. (The preset password is 3308.) Turn the power off then disconnect the power plug and reinsert it back into the wall.Retry again. Use region 1 disc only. Reburn disc as the software edition used may not be compatible with the player. Check web site for instruction. Use new editions of software such as Voyetra Audiostation 4, Adaptecs Easy CD Creator or NT 1. Roxios Toast Titanium, etc. Make sure MP3 file are not encoded with a variable bit rate such as provided by Real Networks.