Owners Manual

Please read before using this equipment.
DVD/CD Player with Video Cassette Recorder
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.

EWD2204

INSTRUCCIONES EN ESPAOL INCLUIDAS. Table of Contents

Precautions

Laser Safety. Important Safeguards. Installation Location. Avoid the Hazards of Electrical Shock and Fire. Moisture Condensation Warning. About Copyright. Symbol Used in This Manual. Maintenance.2.3.4.4.4.4.4.4

Supplied Accessory

Remote control RF cable (NB100UD or NB150UD) (WPZ0901TM002) with two AA batteries
About the Video Cassettes and Discs. 5 Playable Video Cassettes. 5 Playable Discs. 5 Unplayable Discs. 5 Connections. 5 RF Output Channel. 5 Hint for Cable Box or Satellite Box. 6 Connection to an Audio System. 6 Connection to a TV. 7 Front & Rear Terminals. 7 About the Remote Control and Front Panel. 8 VCR/DVD Switching. 9 Preset for Use. 10 Turn on the unit for the first time. 10 Clock Set Up. 10

VCR Functions

Playback. Recording & OTR (One Touch Recording). Other Operations. On-Screen Operations. Recording Features. Timer Recording. Hint for Timer Recording. Copying a Video Tape. Special Features. Time Search / Index Search / Auto Repeat.. 24 24
Audio/Video cables (WPZ0102TM015 or WPZ0102LTE01)
Owners Manual (0VMN04085)

Owner's Manual

DVD Functions
Playback. MP3 Playback. The On-Screen Display. Search Function. Track Search / Title/Chapter Search / Time Search. Marker Setup. Repeat / Random / Programmed Playback. Repeat Playback / Repeat A-B Playback / Random Playback / Programmed Playback. Special Settings. Subtitle Language / Audio Language / Camera Angle / Black Level Setting / Stereo Sound mode / Virtual Surround. DVD Set Up. LANGUAGE Setting. DISPLAY Setting. AUDIO Setting. PARENTAL Setting. To return the All Selections of SET UP (except for PARENTAL) to the Default Setting Troubleshooting Guide. Specifications. Language List. Limited Warranty.
TOLL FREE : 1-800-256-2487
or visit our web site at http://www.funai-corp.com

Information

Espaol.25 Quick Use Guide.27

Basic TV Connection

Cable Signal Antenna or (Back of TV) Cable Signal Antenna (Back of DVD/VCR) or (Back of TV)

Disconnect

Connect

ANT-IN

ANT-OUT

RF Cable (supplied)

AC outlets Plug in

From DVD/VCR From TV

Please refer to "Connections" on page 5.

Espaol

If you need additional operating assistance after reading this owners manual or to order replacement accessories, please call
DVD Functions VCR Functions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Laser Safety

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: CAUTION: LOCATION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR VITER LES CHOC LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.

FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) ANTENNA LEAD WIRE
NEC NATIONAL ELECTRICAL CODE

S2898A

14. Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges. 15. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. Object and Liquid Entry - Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product. 18. Servicing - Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service - Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. e. If the video product has been dropped or damaged in any way. f. When the video product exhibits a distinct change in performance this indicates a need for service. 20. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21. Safety Check - Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. 22. Heat - This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Installation Location

For safety and optimum performance of this unit: Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.

Maintenance

SERVICING Please refer to relevant topics on the Troubleshooting Guide on page 23 before return the product. When this unit become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our help line mentioned on the front page to locate an Authorized Service Center. CLEANING THE CABINET Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. CLEANING DISCS When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records. CLEANING THE DISC LENS If this unit still does not perform properly although you refer to the relevant sections and to TROUBLESHOOTING GUIDE in this Owners Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. DISC HANDLING Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. Always store the disc in its protective case when it is not used. AUTO HEAD CLEANING Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture. Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your DVD/VCR may need to be cleaned. 1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2. If a Video Head Cleaner does not solve the problem, please call our help line mentioned on the front page to locate an Authorized Service Center. NOTES: Remember to read the instructions along with the video head cleaner before use. Clean video heads only when problems occur.

To call up the VCR Menu.

Installing the Batteries for the Remote Control
Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control.
To open or close the disc tray. To pause disc playback. To advance playback one frame at a time. To begin disc playback. To turn the unit on or off.

PLAY POWER

REC/OTR REPEAT
To call up the DVD setup menu. To skip tracks. To change channels. To adjust the tracking manually during playback. To view the tape in slow motion. To select the recording speed.

To skip chapters.

Keep in mind the following when using the remote control: Make sure that there is no obstacle between the remote and the remote sensor on the unit. Use within the operating range and angle, as shown.
To stop playback. To select subtitles on a disc. To call up the Top Menu on a disc.

To stop playback.

To stop playback or recording. To put the VCR into standby mode for a timer recording.

TOP MENU

t ou ab 7m) in ( ith t W 3 fee 2

Remote control

To return to the top file of the highest hierarchy in the program and MP3 menu. (MP3) To select the VCR output mode. To activate the remote control in VCR mode.
To select DVD position or TV position.
To select CD/MP3 position or TV position.
To select VCR position or TV position.

V.SURR

To set virtual surround on/off. To set virtual surround on/off.

Front Panel Display

Lights up when the disc is inserted. Lights up during a recording. Flashes when a recording is paused. Lights up when the inserted disc is being played back. Flashes when an unacceptable disc is installed.
Lights up when power is on.

OPEN/CLOSE

STOP/EJECT

TIMER REC REC /OTR

VCR CHANNEL

OUTPUT

DISC IN SKIP/REV STOP

FWD/SKIP

Lights up when the timer recording or an OTR recording has been set.

VCR/DVD Switching

Because this product is a combination of a VCR and a DVD player, you must select first which component you wish to operate with the OUTPUT button.

VCR MODE

Press the VCR button on the remote control. (Verify that the VCR OUTPUT light is lit.)
POWER REW F.FWD STOP/EJECT PLAY TIMER REC REC /OTR VCR CHANNEL

DVD MODE

Press the DVD button on the remote control. (Verify that the DVD OUTPUT light is lit.) Note Pressing only the OUTPUT button on the front panel DOES NOT switch the mode of the remote control. You MUST select the correct mode on the remote control.

VCR button

DVD button

DVD SKI

REC/OTR PLAY STOP
DVD OUTPUT light OUTPUT button VCR OUTPUT light

REC (Normal recording) OTR(8:00) OTR(0:30) OTR(1:00).. OTR(7:30)

Record tab

To stop recording temporarily (Pause mode)
Press the PAUSE/STILL button. During the rec-pause mode, five C marks appear on the TV screen. Each C mark represents one minute. Press it again to resume recording.

Other Operations

To cue or review picture during playback (Picture Search)
Press the F.FWD or REW button. Press it again and the DVD/VCR will search in super high speed. (in the LP/SLP modes only)

Counter Reset

Press the CLEAR/C.RESET button.
Still/Slow/Pause mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head. To return to playback from the Picture Search/Still/ Slow mode, press the PLAY button.
To play back in slow motion
Press the SLOW button during playback or the still mode. If the noise bars appear on the TV screen, you can reduce it by pressing the CHANNEL buttons.
To freeze the picture on TV screen during playback (Still mode)
Press the PAUSE/STILL button. Each time you press the button, the picture will be forwarded by one frame. If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing the CHANNEL buttons. If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped.

Auto Rewind

When a tape reaches its end during playback, fast-forward, or recording (except timer recording and One Touch Recording), the tape will automatically rewind to the beginning. After rewinding finishes, the DVD/VCR will eject the tape.

On-Screen Operations

To call up the main menu
-MENUB TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT

To decide

CHANNEL SET UP AUTO SET UP B MANUAL SET UP

To select an item

-MENUor TIMER PROGRAMMING AUTO REPEAT [OFF] B CHANNEL SET UP CLOCK SET LANGUAGE SELECT

To exit the menu

Recording Features

Timer Recording

Insert a tape with its record tab into the DVD/VCR.
Select the desired start time (hour)
ONE TIME PROGRAM or PROGRAM NUMBER 4 DATE / MON START TIME : END TIME : CHANNEL REC SPEED
ONE TIME PROGRAM PROGRAM NUMBER 4 DATE / MON START TIME : PM END TIME : PM CHANNEL 16 REC SPEED SP B SP SLP
Select the desired recording speed To set another program after step [9], press the B button. Then, continue with step [2].

Select the minute

or PROGRAM NUMBER 4 DATE / START TIME : END TIME : CHANNEL REC SPEED
TIMER REC light on the front panel appears. The DVD/VCR will change to the DVD mode.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

(Back of another source)

1) Insert a pre-recorded tape into the playing VCR. 2) Insert a tape with its record tab into the recording DVD/VCR. 3) Press the SPEED button on the remote control or of the recording DVD/VCR to select the desired Connect Connect recording speed (SP/SLP). 4) Select the "L1" or "L2" position on the recording RF cable (supplied) DVD/VCR. Audio/Video cables *Front input jacks are also available To use the input jacks on the back of this unit, (not supplied) select "L1" position by pressing [0], [0], [1] on the remote control or the CHANNEL buttons. Hint To use the input jacks on the front of this unit, For best results during dubbing, use the front panel controls whenever select "L2" position by pressing [0], [0], [2] on possible. The remote control might affect another sources operation. the remote control or the CHANNEL buttons. Always use video-quality shielded cables with RCA-type connectors. 5) Press the REC/OTR button on the recording Standard audio cables are not recommended. DVD/VCR. You can use a video disc player, satellite receiver, or other audio/video 6) Begin playback of the tape in another source. component with A/V outputs. 7) To stop recording, press the STOP/EJECT button L1 or L2 is found before the lowest memorized channel. (Example: CH02) on the recording DVD/VCR, then stop playback of the tape in another source. L2 input jacks are on the front of this DVD/VCR.
(Back of TV) (Back of Recording DVD/VCR*)

ANT-IN ANT-OUT

DVD AUDIO S-VIDEO OUT OUT

VIDEO VIDEO OUT IN

Special Features

Time Search

You can specify the time for fast forwarding or rewinding. Insert a tape into this unit.

Index Search

You can specify the number of programs to be skipped. Insert a tape into this unit.

Auto Repeat

You can repeat playback of a whole tape automatically. Insert a tape into this unit.

TIME SEARCH :

INDEX SEARCH
-MENUTIMER PROGRAMMING B AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT

x2 (Twice)

x1 (Once)
Select the desired length of time for fast forwarding or rewinding

TIME SEARCH 2:50 or

INDEX SEARCH 03
CURRENT PROGRAM Beginning of tape
-MENUTIMER PROGRAMMING B AUTO REPEAT [ON] CHANNEL SET UP CLOCK SET LANGUAGE SELECT

01 ~ 20

End of tape

Pro.2 01

Pro.3 01

Pro.4 02

Pro.5 03
0:01~ 9:59 (1 minute~9 hours and 59 minutes)

INDEX MARK

To rewind To fast forward To rewind To fast forward

AUTO REPEAT B

After searching,
To cancel Auto Repeat, follow steps [1]-[2] above. Then, press the B button, so that [OFF] appears beside AUTO REPEAT. Press the CLEAR/C.RESET button to exit. If menu remains on the TV screen at step [3], press the CLEAR/C.RESET button to exit.
This unit stores index mark at the beginning of the recording. There should be time gap between two index marks for the Index Search.
Hint f or Timer Sear c h & Inde x Sear c h
These functions are not available during recording. Press the STOP button to stop the search. If the end of the tape is reached during a Search, this unit will cancel the search and rewind the tape.

DVD Functions Playback

Before: Turn on the TV, amplifier and any other components which are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel.

Hint 1

PLAY STOP REC/OTR
OPEN/CLOSE POWER REW F.FWD STOP/EJECT PLAY TIMER REC REC /OTR VCR CHANNEL
When you play an MP3 file, details on page 16. A prohibited icon may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit. Some DVDs may be played from title 2 or 3 due to specific programs. During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

DVD menu

DVDs may contain menus to access special features. Press appropriate Number buttons or use the arrow (K/L/s/B) buttons to highlight your selection on the DVD main menu and press the ENTER button to confirm.
To use the SKIP/REV, FWD/SKIP buttons on the Main Unit

DVD-V CD MP3

Calling up a Menu Screen during Playback
Press the MENU button to call up the DVD menu. Press the TOP MENU button to call up the title menu.
Press once to skip chapters or tracks to a desired point. Press and hold to change forward or reverse playback speed.
Note Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for details.
Fast Forward/Reverse Search

Resume

Press the STOP button. Resume message will appear on the TV screen. Press the PLAY button, playback will resume from the point at which playback was Press 'PLAY' to play from here. To play the beginning, stopped. press 'STOP' first and then 'PLAY'. To cancel resume, press the STOP button one more time during the Stop mode. For MP3, playback will resume from the beginning of the track at which playback was stopped.
Slow Forward/Slow Reverse
Paused and Step-by-Step Playback
Press the PAUSE button during playback. To continue playback, press the PLAY continue playback, PLAY b utton.

CH(Chapter): Current chapter number / Total chapters

4/12 0:13:45 - 0:45:40 T

0:00:00 - 1:23:45
Remaining time of the current title Elapsed time of the current title
TT(Title): Current title number / Total titles
Layer numbers, appears only when playing a two-layered Disc L0: Layer 0 is playing L1: Layer 1 is playing Current repeat setting appears only when the repeat setting is active C: Chapter repeat / T: Title repeat / A B: A-B repeat

TRACK 01

The name of the file currently in play will be displayed.
BIT RATE: The amount of audio and video data currently being read

1/36 0:01:15

TR(Track): Current Track number / Total Tracks
Current Repeat setting, if active T: Track repeat G: Group (folder) repeat A: Disc repeat
Elapsed playing time of the current track

Search Function

Track Search

Title / Chapter Search

Using the number buttons 2 3
Using the SEARCH MODE button 1

TOTAL 1:29:00

For single digit tracks (1-9), press a single number (eg. track 3, press 3). To play track 26, press +10, 2, 6 of the Number buttons.
x1(Press once) for the chapter search x2 (Press twice) for the title search
x repeatedly until this screen appears
Within 30 seconds Within 30 seconds e.g. When you enter 5:55, 0 is automatically entered, so that 0:05:55 is displayed on the time search screen.
Using the SKIP H , G buttons 1

/2 PLAY

Current Chapter (CH)

Within 30 seconds

CH 1 CH 2 CH 3 CH 4 SKIP

Current Track (TR)

TR 1 TR 2 TR 3 TR 4 SKIP
Note Depending on the disc being played, this function can also be performed by directly entering the desired chapter number with the number buttons. Refer to the manual accompanying the disc.

Marker Setup

This feature allows you to assign a specific point on a disc to be called back later.
To return to the marker later 1
To e xit the marker screen 1

To set a marker 1

x repeatedly until this screen appears Notes Opening the disc tray or turning off the power will erase all markers. Selecting AC at step [2] in the section To set a marker will also erase all markers. To clear a marker, select the marker to be cleared at step [2] in the section To return to the marker later, and then press the CLEAR/C.RESET button.

Some DVD discs may contain scenes which have been shot simultaneously from various angles. You can change the camera angle if the ( ) icon appears on the screen. If the ANGLE ICON setting is OFF in the Display menu, the ( ) icon will not appear. (Refer to pages 20-21.)
You can enjoy stereophonic virtual world on your existing 2 channel stereo system.

DVD Set Up

Q UICK SETUP Men u
You can select the PLAYER MENU, TV ASPECT, or DOLBY DIGITAL from the QUICK SETUP menu quickly.

<SETUP MENU>

Confirm that QUICK is selected
SETUP QUICK CUSTOM INITIALIZE

Select the desired item

QUICK ENGLISH 4:3 LETTER BOX ON
PLAYER MENU TV ASPECT DOLBY DIGITAL
P20 A (Step 5) P21 B (Step 5) P21 C (Step 5)
Refer to the sections PLAYER MENU, TV ASPECT, or DOLBY DIGITAL section on page 20 or 21.

CUSTOM Men u

You can change the DVD players settings.

Select CUSTOM

to decide To select the desired item
SETUP LANGUAGE DISPLAY AUDIO PARENTAL CUSTOM

LANGUAGE menu

SETUP LANGUAGE ORIGINAL OFF ENGLISH ENGLISH

DISPLAY menu

SETUP DISPLAY 4:3 LETTER BOX AUTO ON ON TV ASPECT STILL MODE ANGLE ICON AUTO POWER OFF

AUDIO menu

SETUP AUDIO ON ON ON DRC DOWN SAMPLING DOLBY DIGITAL

PARENTAL menu

SETUP PASSWORD PARENTAL Please enter a 4-digit password.
AUDIO SUBTITLE DISC MENU PLAYER MENU

page 20 A

page 21 B

page 21 C

page 22 D

LANGUAGE Setting

Follow the step 1) to 3) in the CUSTOM Menu section on page 20. Select the desired item

or ENTER

Select the desired language
AUDIO (Default: ORIGINAL) Sets the audio language.
AUDIO ORIGINAL ENGLISH FRENCH SUBTITLE OFF ENGLISH FRENCH DISC MENU ENGLISH FRENCH SPANISH PLAYER MENU ENGLISH FRANAIS ESPAOL
1 Language options are not available with some discs. If OTHER is selected on the AUDIO, SUBTITLE or DISC MENU screen, press four-digit number to enter the code for the desired language. (Refer to the language code list on page 24.) Only the languages supported by the disc can be selected. 2 Language Setting for Audio and Subtitle is not available with some discs. Then use the AUDIO and the SUBTITLE/T-SET button. Details are on page 19.

DRC DOWN SAMPLING DOLBY DIGITAL
DOWN SAMPLING: (Default: ON) Set to ON when outputting in 48 kHz. Set to OFF when outputting the original sound.
DRC ON DOWN SAMPLING ON DOLBY DIGITAL ON ON OFF ON
DOLBY DIGITAL: QUICK (Default: ON) Set to ON when the unit is connected to a Dolby Digital receiver. ON: Outputs a Dolby Digital Signals OFF: Convert the Dolby Digital into PCM (2 channel)
DRC ON DOWN SAMPLING ON DOLBY DIGITAL ON

ON ON OFF

PARENTAL Setting
Parental Control limits the disc viewing that exceed your settings. (an incorrect password will not play.) This feature prevents your children from viewing inappropriate materials.

Parental Le vels

Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set. Follow the steps 1) to 3) in the CUSTOM Menu section on page 20.
Enter your desired fourdigit password (except for 4737)

Select PARENTAL LEVEL

Select the desired levels

PARENTAL LEVEL CHANGE

PARENTAL LEVEL ALL [NC-17] 6 [R]
SETUP PASSWORD Please enter a 4-digit password. PARENTAL
or If you have set a password already,
enter the current four-digit password.
SETUP PASSWORD Enter current password. PARENTAL
CONTROL LEVELS ALL: All parental locks are cancelled. Levels 8: DVD softwares of any grades (adult/general/children) can be played back. Levels 7 to 2: Only DVD softwares intended for general use and children can be played back. Level 1: Only DVD softwares intended for children can be played back, with those intended for adult and general use prohibited.
To Chang e the Pass w or d f or Parental Controls
You can change your password for parental controls. Follow the steps 1) to 3) in the CUSTOM Menu section on page 20.

Select CHANGE

Enter your new four-digit password (except for 4737)
PARENTAL LEVEL CHANGE ALL
Record the password in case you forget it. If you forget the password, press 4, 7, 3, 7 at step 4, then enter your new password. Password will be cleared and parental levels will be set to ALL.

To return the All Selections of SET UP (except for PARENTAL) to the Default Setting

or ENTER ENTER

Select INITIALIZE

Select YES

SETUP Initialize? NO YES INITIALIZE
SETUP SETUP QUICK CUSTOM INITIALIZE QUICK CUSTOM INITIALIZE

x2 (twice)

When you cancel to initialize at step 3,select NO.
Information Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.
Make sure the power plug is connected to an AC outlet. Make sure the power is turned on. This unit does not respond to Check if the power plug is connected to an AC outlet. the remote control. Check the batteries in the remote control. Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote. You have to be within 23 feet of this unit. Check if the right mode is selected. If its not in the right mode, press the DVD or VCR buttons, whichever you need, on the remote control. Check if a cassette tape is in this unit. Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then. If you hear some signal sound from the radio in response to your pressing buttons on the remote, the remote control is working. Timer recording is impossible. Make sure the timer recording is set correctly. V Make sure the TIMER REC light appears on the DVD/VCR. If not, press the SUBTITLE/T-SET button. C Make sure the VCR clock is set correctly. R Cannot go into Record mode. Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape. Activate this unit in VCR mode. Press the VCR button on the remote control so that the green VCR OUTPUT light is lit. ) buttons Playback picture is partially noisy. Adjust tracking control for a better picture by pressing the CHANNEL ( on the DVD/VCR or the SKIP/CH.(K/L) buttons on the remote control. Cannot view a tape but the Head cleaning may be necessary. Refer to AUTO HEAD CLEANING. audio is OK. Make sure the VCR is not in the Menu mode. No, or poor, playback picture. Change the RF output channel to CH4. Then select the same channel on the TV. Fine tune your TV. TV programs cannot be seen Re-check the ANT. IN and ANT. OUT connections. See pages 1 and 6. normally. Press the VCR/TV button. Press the VCR button on the remote control to activate it in the VCR mode. Check if the green VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button. Video or color fades in and out when You cannot copy a copyrighted video tape. You are experiencing copy guard protection. making a copy of a video tape. Cannot remove the tape. Check if this unit is in the VCR mode. If not, press the VCR button on the remote control to switch the mode. No picture. Connect the video cables firmly. D Insert a correct video disc that plays on this unit. V Press the DVD button on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features. D Insert the disc. Disc cannot be played. Clean the disc. Place the disc correctly with the label side up. Cancel the parental lock or change the control levels. Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface. Connect the audio cables firmly. No sound. Turn the power of the audio component on. Correct the audio output settings. Correct the input settings on the audio component. This unit does not support DTS audio. This is not a malfunction. No DTS audio is output. Connect this unit directly to the TV. Distorted picture. There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction. Although pictures may stop for a moment, this is not a malfunction. Audio or subtitle language The selected language is not available for audio or subtitles on the DVD. does not match the set up. This is not a malfunction. The camera angle cannot be The DVD does not contain sequences recorded from different camera angles. changed. This is not a malfunction. Audio or subtitle language The DVD does not contain audio source or subtitles in the selected language. cannot be changed. This is not a malfunction. Prohibited icon appears on the That operation is prohibited by this unit or the disc. screen, prohibiting an operation This is not a malfunction. Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owners Manual for details on correct operations. Playback from a desired track and random playback are not available during program playback. Some functions are prohibited on some discs.

Para saltar captulos

SUBTITLE T -SET
Para repetir entre los puntos A y B elegidos
Para repetir entre los puntos A y B elegidos (disco compacto)

Quick Use Guide 1

Please refer to Basic TV Connection on the front page before you use this unit. RF Output Channel
If channel 3 is already occupied for broadcasting, 1)Set your TV to channel 4. 2)Insert a pre-recorded tape into this unit. 3)Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit. If noise appears on the TV screen, press the VCR/TV button on the remote control. 4)Press the PLAY button once. 5)After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds. The RF output channel will change to channel 4 from channel 3 and you will see a playback picture. When a picture does not appear on the TV screen, repeat step [4]. 6)Press the STOP button to stop playback.
CLOCK SET MONTH DAY 03 / HOUR MINUTE : YEAR AM/PM

Select the current month

AUTO SET UP CH 01 or
Installing the Batteries for the Remote Control 2 3
POWER REW F.FWD VIDEO AUDIO
STOP/EJECT PLAY TIMER REC REC /OTR VCR CHANNEL
Please wait for a few minutes. After scanning.
The tuner stops on the lowest memorized channel. You can select only the channels memorized in this unit by using the CHANNEL buttons.
Press the DVD button on the remote control. (Verify that the DVD OUTPUT light is lit.)
Pressing only the OUTPUT button on the front panel DOES NOT switch the mode of the remote control. You MUST select the correct mode on the remote control.

Quick Use Guide 6

VCR Playback

DVD/CD Playback

Remote Control TV Screen
DVD mode Button Disc/Tape

VCR mode

To select chapter or title directly.
To select track directly.
To search forward/backward through a disc. To search forward/backward To begin slow forward/reverse through a disc. playback during the pause mode.
To select audio languages on To select STEREO, a disc. L-CH or R-CH. (CD) To clear the markers. To clear the numbers entered incorrectly. To clear the markers. (CD) To remove status No. in program input. To clear the numbers entered incorrectly. To exit the VCR Menu. To reset the tape counter.
To display the current disc To display the current disc To display the current time, mode. mode. tape counter, and channel. To select the DVD output To select the DVD output mode. mode. To activate the remote control To activate the remote control in DVD mode. in DVD mode. To call up the Menu on a disc. To set black level on/off. To call up the MP3 menu. (MP3) To arrange the playing order or play randomly. To open or close the disc tray. To pause disc playback. To begin disc playback. To turn the unit on or off. To eject the video cassette from the VCR. To pause tape playback or recording. To advance playback one frame at a time. To begin tape playback. To turn the unit on or off. To start a recording. To play a track or disc repeatedly. (CD) To play a track, group or disc repeatedly. (MP3) To return to the previous To return to the previous operation on the DVD setup operation on the DVD setup menu. menu. To search track. To search chapter, title or time. To search time. (CD) To rapidly return to To rapidly return to a location of disc. a location of disc. Search the markers. Search the markers. (CD) To play a chapter or title repeatedly. To call up the DVD setup menu. To call up the DVD setup menu. To skip tracks. To change channels. To adjust the tracking manually during playback. To view the tape in slow motion. To select the recording speed. To stop playback. To select subtitles on a disc. To call up the Top Menu on a disc. To return to the top file of the highest hierarchy in the program and MP3 menu. (MP3) To select the VCR output mode. To activate the remote control in VCR mode. To select DVD position or TV position. To select CD/MP3 position or TV position. To select VCR position or TV position. To stop playback. To stop playback or recording. To put the VCR into standby mode for a timer recording. To call up the VCR Menu.