Sylvania 6720FDE Manual
Sylvania 6720FDE, size: 1.4 MB
Here you can find all about Sylvania 6720FDE like remote and other informations. For example: .
Sylvania 6720FDE manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Sylvania 6720FDE please write about it to help other people. [ Report abuse or wrong photo | Share your Sylvania 6720FDE photo ]
User reviews and opinions
|empy||1:37pm on Tuesday, October 12th, 2010|
|6720FDE cannot record and display two different stations The following may be true of other similar products as well.|
|WolframZimmermann||9:08am on Wednesday, October 6th, 2010|
|Trouble at first I went to Best Buy and bought one of these units and when I arrived at home with it and went to set it up the DVD tray would not come...|
|blydunchikus||1:21pm on Sunday, September 12th, 2010|
|Excellent TV-Combo for bedroom / smaller room The 20" pure flat display is crisp with minimal edge fade or blur. GREAT FEATURES BUT POOR QUALITY Pros: Cheap, looks nice, flat screen, good picture, TV/DVD/VCR Cons: Ridiculous. DVD player never worked.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
COLOR TV/VCR/DVD TRIPLE COMBO
This Owners Manual is made of recycled paper.
ACCESSORIES Batteries PART NO. 2 AA Batteries 0EMN02469 Remote Control Unit NE222UD Owners Manual
INSTRUCCIONES EN ESPAOL INCLUIDAS.
As an ENERGY STAR Partner, our company has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.
If you need additional operating assistance after reading this owners manual or to order replacement accessories, please call TOLL FREE : 1-800-968-3429. Or visit our WEB SITE at http://www.funai-corp.com Please read before using this equipment
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK DO NOT OPEN
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear of the cabinet.
1.Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions-The safety and operating instructions should be retained for future reference. 3.Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions-All operating and use instructions should be followed. 5.Cleaning-Unplug TV/VCR/DVD from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6.Attachments-Do not use attachments not recommended by the TV/VCR/DVD manufacturer as they may cause hazards. 7.Water and Moisture-Do not use this TV/VCR/DVD near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8.Accessories-Do not place this TV/VCR/DVD on an unstable cart, stand, tripod, bracket, or table. The TV/VCR/DVD may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/VCR/DVD. Any mounting of PORTABLE CART WARNING the appliance should follow the manufacturers instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care.Quick stops, excessive force, and uneven S3126A surfaces may cause the appliance and cart combination to overturn. AMEUBLES- Cet appareil ne doit SYMBOLE D'AVERTISSEMENT POUR LES tre plac que sur un meuble (avec APPAREIL ETCOMPOSANTES MEUBLE A ROULETTES ou sans roulettes) recommand par le fabricant. Si vous linstallez sur un meuble roulettes, dplacez les deux ensembles avec prcaution. Un arrt brusque, lutilisation dune force excessive et des surS3126A faces irrgulires risquent de dstabiliser lensemble et de le renverser. 9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/VCR/DVD and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV/VCR/DVD on a bed, sofa, rug, or other similar surface. This TV/VCR/DVD should never be placed near or over a radiator or heat register. This TV/VCR/DVD should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 10.Power Sources-This TV/VCR/DVD should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/VCR/DVDs intended to operate from battery power, or other sources, refer to the operating instructions. 11.Grounding or Polarization-This TV/VCR/DVD is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
F IGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE
ANTE NNA L EAD I N WI RE GROUND CLAMP
A NTENNA DI SCHARG E UN I T (NEC SECTION -2 0)
EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION -2 1)
G RO UND CL AM PS
NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART , PART H)
13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/VCR/DVD, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) 14.Lightning-For added protection for this TV/VCR/DVD receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/VCR/DVD due to lightning and power-line surges. 15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17.Object and Liquid Entry-Never push objects of any kind into this TV/VCR/DVD through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/VCR/DVD. 18.Servicing-Do not attempt to service this TV/VCR/DVD yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19.Damage Requiring Service-Unplug this TV/VCR/DVD from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV/VCR/DVD. c. If the TV/VCR/DVD has been exposed to rain or water. d. If the TV/VCR/DVD does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/VCR/DVD to its normal operation. e. If the TV/VCR/DVD has been dropped or damaged in any way. f. When the TV/VCR/DVD exhibits a distinct change in performance-this indicates a need for service. 20.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21.Safety Check-Upon completion of any service or repairs to this TV/VCR/DVD, ask the service technician to perform routine safety checks to determine that the TV/VCR/DVD is in proper operating condition. 22.Heat-This TV/VCR/DVD product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR VITER LES CHOCS LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR VITER LES CHOCS LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
mode automatically changes without control.
A NOTE ABOUT RECYCLING This products packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. -7EN
Dolby Digital sound On-screen display
This TV/VCR/DVD can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.
Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
Random playback for audio CD and MP3
Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control.
Chapter search / Title search / Track search / Time search
This TV/VCR/DVD can shuffle the order of tracks to play them in random order. You can program the order of tracks to play them in any desired order.
Chapter / Title / Track / Group / All / A-B
Program playback for audio CD and MP3
The part designated by user can be called back. User can resume to playback from the part at which the play was stopped.
DVD menus in a desired language
You can display DVD menus in a desired language, if available on a DVD.
Screen saver/Auto power-off functions
Virtual Surround Bit rate indication DRC (Dynamic range control)
The screen saver program starts when there is no input from the TV/VCR/DVD for five minutes in the stop mode. When the screen saver program is activated for 15 minutes, the power automatically turns off.
Subtitles in a desired language
You can control the range of sound volume.
You can select a desired language for the display subtitles, if that language is available on a disc.
Selecting a camera angle
You can select the desired camera angle, if a disc contains sequences recorded from different angles.
Choices for audio language and sound mode
You can select the desired audio language and sound mode, if different languages and modes are available on a disc.
You can set the control level to limit playback of discs which may not be suitable for children.
Automatic detection of discs
This TV/VCR/DVD automatically detects if the loaded disc is DVD, audio CD or MP3 on disc.
Playback MP3 disc
NOTE: We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this TV/VCR/DVD, please be aware that the code number given may not operate this TV/VCR/DVD. In this case, please call the manufacturer of the universal remote control. -8EN
48. COAXIAL digital audio out Jack Connect to the digital input of an external amplifier or decoder for DVD audio only.
PREPARATION FOR USE
Satellite Box or Cable Box (Not supplied)
VHF/UHF Antenna (Not supplied) From Cable System or Satellite Dish VHF Antenna (Not supplied)
From Cable System
75-ohm Coaxial Cable (Not supplied)
UHF Antenna (Not supplied) or
VHF/UHF Combiner (Not supplied)
or Flat twin-lead cable
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration. By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR/DVD Remote Control. Unattended timer recording is limited to one channel at a time. Antenna/Cable Connections Continued on the Next Page.
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/VCR/DVD without a converter box. By using this connection you can: 1) Use the TV/VCR/DVD remote to select channels. 2) Program one or more unscrambled channels for Automatic Timer Recording. NOTE: This TV/VCR/DVD will ONLY record and view the same channel.
- 11 -
TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the TV/VCR/DVD channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. Note to CATV system installer: This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 AA penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover.
EXTERNAL INPUT MODE
When using an external input signal (another VCR or video camera), connect the players audio/video output cables to the AUDIO L/R IN/ AUX VIDEO IN jacks of your TV/VCR/DVD. Then press the CHANNEL button K or L until AUX appears on the screen.
CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on an another source (VCR or video camera), use the audio/video input jacks on the front of the TV/VCR/DVD. Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/VCR/DVD. Then press the CHANNEL button K or L until AUX appears on the screen. NOTE: When you connect a monaural VCR (another source) to this TV/VCR/DVD, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this TV/VCR/DVD. The audio will output in both L and R channel equally.
To the audio output jacks [Another source]
Audio/Video coaxial cable (not supplied) etc. To the video output jack [Front of the TV/VCR/DVD]
- 12 -
CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT DECK (for DVD)
Use an audio coaxial digital cable available at retail for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.
Amplifier equipped with digital input jacks, MD deck, DAT deck, etc. To COAXIAL DIGITAL AUDIO INPUT jack
To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack (only DVD AUDIO OUT)
[Fig. 6] NOTES: The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck. Be sure to turn off the power to all components in the system before connecting another component. Refer to the Owner's Manuals for the components to be connected to the TV/VCR/DVD. Set Dolby Digital to OFF for audio output in the setup mode. Playing a TV/VCR/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
05 : 40
Start the clock
Press the SETUP button on the remote control. Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the remote control. Use this feature to synchronize the clock with the correct time. NOTE: When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.
Press the SETUP button on the remote control. Press the Arrow button K or L to select SETTING CLOCK. Press the ENTER button to enter SETTING CLOCK menu.
Set AUTO CLOCK to [ON]
SETTING CLOCK B AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF]
Press the Arrow button B until AUTO CLOCK [ON] appears.
TO CHANGE CLOCK SETTING
If you want to change the clock, 1)Follow steps  and . 2)Select where you want to change using the Arrow button B. 3)Enter correct numbers using the Arrow button K or L. 4)Press the SETUP button on the remote control to start the clock. PLEASE NOTE: If there is no local PBS station in your area or on your cable system, select AUTO CLOCK and press the ENTER button to turn [OFF] this function. Then you can manually adjust the clock.
Begin AUTO CLOCK CH SEARCH
SETTING CLOCK AUTO CLOCK [ON] B AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF]
Press the Arrow button L to select AUTO CLOCK CH SEARCH. Press the ENTER button. The TV/VCR/DVD is now searching for the station which contain the auto clock set signal. The search for a signal may take up to 20 seconds per channel. _ _ appears at the lower left of the screen when the search has ended. Auto Clock station- write down the number(s) that appear on the screen. These are the auto clock station(s) in your area. See step  on page 17. If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 17. Press the SETUP button to exit the screen.
AUTO CLOCK CH SEARCH 13 __
- 16 -
NOTE: During Auto Clock CH Search, the picture may be distorted. This is normal.
Select this feature and the TV/VCR/DVDs clock automatically will advance one hour in April, then reverse one hour in October. When Daylight-Saving Time is ON, the clock will change automatically as follows: First Sunday of April : At 2 AM the clock immediately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record. Last Sunday of October : At 2 AM the clock immediately changes to 1 AM. Make sure. Press the POWER button to turn on the TV/VCR/DVD.
Enter the channel number that contains the Automatic Clock Setting Signal
Press the SETUP button on the remote control. Press the Arrow button K or L to select SETTING CLOCK. Press the ENTER button to enter SETTING CLOCK menu. Press the Arrow button L to select AUTO CLOCK CH. Press the ENTER button or the Arrow button s or B until you locate Auto Clock Set station number. See step  on page 16. Press the SETUP button to exit the screen.
TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USERS SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH
AUTO CLOCK [ON] AUTO CLOCK CH SEARCH B AUTO CLOCK CH [ 45] MANUAL CLOCK SET D.S.T. [OFF]
Turn off the TV/VCR/DVD
Once the TV/VCR/DVD is turned off , it will periodically check and set the correct date and time.
Set D.S.T. (Daylight-Saving Time) to [ON]
SETTING CLOCK AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET B D.S.T. [ON]
Press the Arrow button K or L to point to D.S.T. Then, press the ENTER button until [ON] appears.
Exit the Daylight-Saving Time mode
Press the SETUP button on the remote control to return to TV mode.
TO CANCEL THE DAYLIGHT-SAVING TIME
Repeat steps  to , select [OFF] using the ENTER button.
- 17 -
CHANNEL SET UP
You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR/DVD channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box. Make sure. Press the POWER button to turn on the TV/VCR/DVD.
DELETING (OR ADDING) CHANNEL
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)
Select CHANNEL SET UP
MENU TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK B CHANNEL SET UP USERS SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH
Press the SETUP button on the remote control. Press the Arrow button K or L to point to CHANNEL SET UP. Then, press the ENTER button.
Select ADD/DELETE CH
CHANNEL SET UP B ADD / DELETE CH (CATV) AUTO CH PROGRAMMING
Press the Arrow button K or L to point to ADD/DELETE CH. Press the ENTER button.
Begin auto ch programming
CHANNEL SET UP ADD / DELETE CH (CATV) B AUTO CH PROGRAMMING
Enter the desired channel number
Press the Arrow button K or L to point to AUTO CH PROGRAMMING. Then, press the ENTER button. The tuner scans and memorizes all the active channels in your area.
The tuner stops on the lowest memorized channel. When AUTO CH PROGRAMMING is activated where there is no TV signal input, NO TV SIGNALS will appear on the display after the completion of the channel scanning. The TV/VCR/DVD may recognize TV channels to be CATV channels by the receiving conditions. In this case, try auto ch programming again in the fine receiving conditions.
Press the Arrow button K or L until your desired channel number 08 appears. (You can also use the number buttons or the CHANNEL K or L button to enter it) (Example: CH8) When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to select channel 125, first press the +100 button then press 2 and 5). You must proceed single-digit channel numbers with a zero (Example: 02. 09).
ADD / DELETE
Delete (or add) it from (into) memory
Press the ENTER button. The channel number changes to light red. The channel is deleted from memory. To delete another channel, repeat steps  and . If you press the ENTER button again, the channel is memorized again. Added channel: Light blue. Deleted channel: Light red.
Exit the channel setup mode
Press the SETUP button on the remote control to returns to TV mode. NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button.
- 18 -
WATCHING A TV PROGRAM
The TV/VCR/DVDs picture controls BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image. NOTES: Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled. When setting the Picture Control, the Game mode will be cancelled. Make sure. TV/VCR/DVD power must be turned on.
Select TV RATING
V-CHIP SET UP B TV RATING MPAA RATING CHANGE CODE
Press the Arrow button K or L to select TV RATING. Then, press the ENTER button.
Blocking TV programs
B TVY TVY7 ( TVG TVPG ( TV14 ( TVMA ( ) ) ) ) [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] [VIEW]
Press the Arrow button K or L to select TV rating that you wish to block. Press the ENTER button to turn it [BLOCK]. When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. When you turn TV-Y to [VIEW], then all ratings will turn to [VIEW] automatically. Selection TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Rating Category Explanations Appropriate for all children Appropriate for children seven and older General Audience Parental Guidance suggested. Unsuitable for children under 14 Mature audience only
Press the Arrow button L to select the sub-rating you wish to block. Then, press the ENTER button twice. When you select [TV-Y7]: Press the Arrow button L or K to select FV (Fantasy Violence). Then, press the ENTER button to select [BLOCK] or [VIEW]. When you select [TV-PG], [TV14] or [TV-MA]: Press the Arrow button L or K to select D(Suggestive Dialog), L(Coarse Language), S(Sexual Situation), or V(Violence). Then, press the ENTER button to select [BLOCK] or [VIEW]. Note: When you select [TV-MA], D does not appear on the TV screen. The sub-ratings which set to [BLOCK] appears next to the rating category in the TV rating menu.
TVY7 [BLOCK] B FV [BLOCK] TVPG [BLOCK] B D L S V [BLOCK] [BLOCK] [BLOCK] [BLOCK] B TVY TVY7 ( ) TVG TVPG (DLSV ) TV14 (DLSV ) TVMA ( LSV ) [VIEW] [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK]
Exit the V-Chip setting mode
Press the SETUP button on the remote control to enter the setting and exit the screen.
Press the SETUP button on the remote control to exit the screen.
- 21 -
CHANGING V-CHIP BLOCKED PROGRAMMING
Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the channel to a station that is not protected. 1)Follow steps  and . 2)Press the Arrow button K or L to select TV RATING. Then, press the ENTER button. Select a TV rating to be unblocked by pressing the Arrow button K or L. Then press the ENTER button to unblock the rating. 3)Press the SETUP button on the remote control to exit the screen.
CHANGE ACCESS CODE
To change access code, follow the steps.
MPAA RATING SET UP 1
Use the number buttons on the remote control to enter the access code. The default code is 0000.
Select CHANGE CODE
V-CHIP SET UP TV RATING MPAA RATING B CHANGE CODE
Press the Arrow button K or L to select CHANGE CODE. Then, press the ENTER button.
Use the number buttons on the remote control to enter the access code.
V-CHIP SET UP TV RATING B MPAA RATING CHANGE CODE
Enter New code
NEW CODE XXXX
Select MPAA RATING
Press the Arrow button K or L to point to MPAA RATING. Then, press the ENTER button.
Select your desired item
G PG PG13 B R NC17 X [VIEW] [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK]
Press the Arrow button K or L to point to your desired item. Then, press the ENTER button to select [BLOCK] or [VIEW]. Selection G PG PG-13 R NC-17 X
Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen. If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space.
CONFIRM CODE _ _ _ _
Rating Category Explanations General Audience Parental Guidance suggested. Unsuitable for children under 13 Restricted; under 17 requires accompanying parent or adult guardian No one under 17 admitted Mature audience only
Press the SETUP button on the remote control to exit the screen. Note: If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary.
When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. When you turn G to [VIEW], then all ratings will turn to [VIEW] automatically. - 22 EN
MTS(Multi-Channel Television sound)SYSTEM
You can record or listen to a program in MTS stereo.
CHECKING THE SELECTED MTS MODE
When you play a VHS tape, or receive a broadcast on the TV/VCR/DVD tuner channel you are watching, the status shown below will appear when you press the DISPLAY button on the remote control.
PLAY B HIFI
12:00AM CH 123 STEREO/SAP
3) 2) 1)
Second Audio Program, which means your program, can also be received in a second language or sometimes a radio station. High Fidelity which produces better sound than standard stereo TV/VCR/DVDs.
1) When a program is broadcast in stereo, STEREO appears on the TV screen. 2) When a program is broadcast in second audio, SAP appears on the TV screen. 3) When a program broadcast both in stereo and second audio, STEREO and SAP appear on the TV screen. NOTE: Although a program may be broadcast in both stereo and second audio, you cannot record in both stereo and second audio at the same time. 4) While the TV/VCR/DVD is set in HIFI stereo mode and playback mode. HIFI appears on the TV screen. While the TV/VCR/DVD is set in monaural(MONO) mode, HIFI disappears from the TV screen. NOTE: If you play non-HIFI tapes while the TV/VCR/DVD is set in HIFI, HIFI will disappear from the TV screen and the TV/VCR/DVD will play automatically in monaural.
MTS RECORDING/MONITOR MODE
Type of broadcast Regular (monaural audio) Stereo broadcast Bilingual broadcast Display on the TV screen -NoneSTEREO SAP STEREO/SAP SELECTION -Invalid-InvalidSTEREO* SAP* Stereo & Bilingual broadcast STEREO SAP STEREO* SAP* Hi-Fi audio track(2-channel) L-channel R-channel Mono Mono L Main audio program Sub audio program L sub audio program R Main audio program Sub audio program R sub audio program Normal audio track Mono L+R Main audio program Sub audio program L+R sub audio program
*You must select the recording mode in TV AUDIO [STEREO] or [SAP] when you record a broadcast.
- 23 -
SELECTING THE MTS SYSTEM
Make sure. TV/VCR/DVD power must be turned on.
TO SELECT MONO MODE
You can change the selection to MONO if you want to listen to HIFI tapes in normal audio playback. 1) Press the SETUP button on the remote control. Press the Arrow button K or L to point to USERS SET UP.Then, press the ENTER button. 2) Press the Arrow button K or L to point to VCR AUDIO. 3) Press the ENTER button until [MONO] appears. 4) Press the SETUP button on the remote control to return to TV mode.
CORRECTIVE ACTION Connect the video cables firmly. Insert a correct video disc that plays on this TV/VCR/DVD. Press the SELECT button on the remote control to select DVD mode. Then, try other DVD feature. Insert the disc. Disc cannot be played Clean the disc. Place the disc correctly, with the label side up. Cancel the parental lock or change the control level. Connect the audio cables firmly. No sound Turn the power of the audio component on. Correct the audio output settings. Correct the input settings on the audio component. This TV/VCR/DVD does not support DTS audio. This is not a malNo DTS audio is output function. There are some cases where pictures may be slightly distorted, which Distorted picture are not a sign of a malfunction. Although pictures may stop for a moment, this is not a malfunction. Audio or subtitle language The selected language is not available for audio or subtitles on the DVD. does not match the set up This is not a malfunction The camera angle cannot be changed The DVD does not contain sequences recorded from different camera angles. This is not a malfunction Audio or subtitle language cannot be The DVD does not contain audio source or subtitles in the selected changed language. This is not a malfunction. Prohibited icon appears on the That operation is prohibited by the player or the disc. screen, prohibiting an operation This is not a malfunction. CD sound dropout Scratched disc. Replace the disc with unscratched one. No CD reproduction DVD picture dropout DVD picture freeze DVD picture in mosaic No DVD reproduction No picture NOTES: PROBLEM
Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owners Manual for details on correct operations.
Playback from a desired track and random playback are not available during program playback.
Wipe the front panel and other exterior surfaces of
the TV/VCR/DVD with a soft cloth immersed in lukewarm water and wrung dry. Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces.
1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2. If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-968-3429, to locate an Authorized Service Center. NOTES: Remember to read the instructions included with the video head cleaner before use. Clean video heads only when problems occur.
AUTO HEAD CLEANING
Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture. Playback picture may become blurred of interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your TV/VCR/DVD may need to be cleaned.
Wite 107 SP-550UZ GSA-E20N 24540 Motorola I530 Millennium XR-C353 MP520 HBH-PV712 XDM6830 DVD-C450K CMT-EX5 Edition BZ28300 HD 325 Aspire 5510 LE32C570 DX4850 78-9003 MC-E468 PM-2 Mk2 F488E Lustre 2011 29PT656A-78R BXR 60 PCV-W1-F Dale II KDC-M4524 Optio P80 Nttl09510 G2 1U P2450H WD-1227RD HP 12C MRD-F752 Gardena T14E VGN-NS20e S T CNC Vla II NN-A554 RX-ES23 TM-U220 EWT13620W Yamaha PSR2 LE26R74BD Cayman EM-55 CK-100 Classic A Pain NAD 912 CQ-RDP143N ZWC85010W Trade Travelmate 5600 SRF-M55 WNR834M Dimage F200 TX-32LMD70F XM-460GTX Workstation Explorer 240 RQ-L31 V2-0-D DMC-FX3 SX30 IS RM-20LA70 A785GMH 128M NA-16VG1 Audio 990 ANW23GV1 Phone-MA361 HX270S Deskjet 948C Cantibmlp R519 Fa01 Ap-18 24CE Roomba 500 Coolpix S640 AVE-750 1372F CP720 Minox EC DVD-1940 LE32C350d1W ZM80D-HP Album ZBM762W SVH72XF1 GCC-H21N HK-700 LN32B550 VP-DC171WI System KX-TD7684 RD 169 Singer 6212 RDR-HX90 P 6612 M D
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101