22" Widescreen Analog/Digital LCD Monitor
16:10 widescreen ratio, 1680 x 1050 resolution Fast MagicSpeed 5 ms (G to G) response time Detailed 700:1 contrast ratio 160/160 horizontal/vertical viewing angles
Exclusive MagicTune, MagicColor and MagicBright 2
Ergonomic height-adjustable stand
imagine having more room to spread out. The Samsung 225BW combines a 22" screen with a 16:10 widescreen aspect ratio to give you a bigger window on your world. Whether you use that power to work more efficiently or to watch a bigger blockbuster, you get sharp text and crisp motion through a fast 5 ms (G to G) response time, 700:1 contrast ratio and exclusive technologies like MagicColor and MagicBright 2 And its all topped. off by a height-adjustable stand. With the Samsung 225BW, its not hard to imagine.
Features Widescreen Format Whether youre creating a masterpiece or just watching one on DVD, the wide 16:10 aspect ratio and 1680 x 1050 resolution deliver a better view. 5 ms (G to G) Response Time Fast pixel response means fast action with virtually no blurring or ghosting. MagicTune with Asset Management
Widescreen Analog/Digital LCD Monitor

Specifications

Panel Type Viewable Size Pixel Pitch Brightness (Typical) Contrast Ratio (Typical) Response Time (Typical) Viewing Angle (Horizontal/Vertical, Typical) Native Resolution Aspect Ratio Maximum Color Interface Input Video Signal Sync Type Input Connectors Plug & Play Power Supply Power Consumption Emission Standard Stand Type Cabinet Color (Front/Back) VESA Wall Mount Magic Technologies Special Features Dimensions (W x H x D)
a-si TFT/TN 22" Wide.282 mm 280 cd/m2 700:ms (G to G) 160/160 (CR >5) 1680 x 1050 16:10 16.7M Analog/Digital Analog RGB, DVI Digital Link: TMDS Separate H/V, Composite H/V, SOG 15-pin D-sub, DVI-D DDC 2B Built-in 55 watts (max.) TCO 03 Three-way adjustable: height (3.9"), swivel, tilt Black 100 mm
MagicTune with asset management, MagicColor, MagicBright 2
Monitor adjustments are made via the mouse, for a sleeker monitor with fewer buttons. You can even adjust networked monitors from a remote computer. MagicColor and MagicBright 2
Enjoy rich, natural color and easily selectable brightness modes that include Text, Internet, Game, Sports and Movie. Three-Way Adjustable Stand The tilting, swiveling, height-adjustable 225BW has all the right moves.
HDCP support, Safe Mode (down-scaling in UXGA) 19.9" x 16.1" x 8.7" (without stand: 19.9" x 13.2" x 2.6") 15.2 lbs. 3/3/3 PC/Windows, Macintosh

Dimensions

19.9"
Net Weight Warranty (P/L/B) Compatibility

13.2"

16.1"

8.7"

Product Information: 1-866-542-7214 Product Support: 1-800-SAMSUNG

www.samsung.com/monitor

2006 Samsung Electronics America, Inc. Samsung is a registered mark of Samsung Electronics Corp., Ltd. Specifications and design are subject to change without notice. See www.samsung.com for detailed information. Printed in USA. 225BW8/06R1

SyncMaster 225BW

Install drivers

Install programs

Notational
Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment.

Prohibited

Important to read and understand at all times

Do not disassemble

Disconnect the plug from the outlet

Do not touch

Ground to prevent an electric shock
When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode.
Do not use a damaged or loose plug. This may cause an electric shock or fire.
Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire.
Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage.
Insert the power plug firmly so that it does not come loose. A bad connection may cause fire.
Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. This may cause an electric shock or fire.
Do not connect too many extension cords or plugs to an outlet. This may cause fire.
Do not disconnect the power cord while using the monitor. A surge may be caused by the separation and may damage the monitor.
Do not use the power cord when the connector or plug is dusty. If the connector or plug of the power cord is dusty, clean it with a dry cloth. Using the power cord with a dusty plug or connector may cause an electric shock or fire.

Installation

Be sure to contact an authorized Service Center, when installing your monitor in a location with the heavy dust, high or low temperatures, high humidity, chemical substance and where it operates for 24 hours such as the airport, the train station or etc. Failure to do so may cause a serious damage to your monitor. Put your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause an electric shock or fire inside the monitor.
Do not drop the monitor when moving it. This may cause damage to the product or human body.
Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. Dropping the product may cause damage to the product or personal injury.
Do not place the product on an unstable or small surface area. Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically children.
Do not place the product on the floor. Someone, specifically children could trip over it.
Keep any flammable objects such as candles, insecticides or cigarettes away from the product. Otherwise, this may cause a fire.
Keep any heating devices away from the power cable. A melted coating may lead to electric shock or fire.
Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in internal temperature may cause fire.
Set down the monitor carefully. The monitor could be damaged or broken.
Do not place the monitor face down. The TFT-LCD surface may be damaged.
Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual.
When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inches ) for ventilation purposes. Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.
Keep the plastic packaging (bag) out of childrens reach. The plastic packaging (bag) may cause suffocation if children play with it.
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric.
Do not spray water or detergent directly on the monitor. This may cause damage, electric shock or fire.
Use the recommended detergent with a smooth cloth.
If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector may cause an electric shock or fire.
Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire.
Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent.

Never insert anything metallic into the monitor openings. This may cause an electric shock, fire or injury.
Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports or etc. It may cause a fire or an electric shock. If an alien substances or water flows into the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center.
If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.
Adjust the resolution and frequency to the levels appropriate for the model. Inappropriate resolution may cause undesirable picture quality. 22 inch (55,9 cm) - 1680 X 1050
Watching the monitor continuously at a too close angle may result in eyesight damage.
To ease eye strain, take at least a five-minute break after every hour of using the monitor.
Do not install the product on an unstable, uneven surface or a location prone to vibrations. Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connecting to other devices, are disconnected before moving the monitor. Failure to disconnect cables may damage it and lead to fire or an electric shock. Place the product out of childrens reach, as they could damage by hanging onto it. A falling product could cause physical damage even death.
When not using the product for an extended time period, keep the product unplugged.
Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, leading to electric shock or fire.
Do not place childrens favorite objects (or anything else that may be tempting) on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing physical damage or even death.
Proper Seating Posture During Monitor Use
Periodically take a 10 minute break every hour or so to relieve eye strain. Position the monitor so that your eyes are slightly higher than the display panel. Adjust the LCD screen panel angle so that the panel faces downwards. Adjust the LCD screen panel so that the reflection of the illumination is minimized for your comfort. Keep your arms parallel to the floor and lightly place your hands on the keyboard. Position the monitor or chair so that your eyes are slightly higher than the display panel.

Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.

Unpacking

Monitor & Sliding Stand

Manual

Quick Setup Guide
Warranty Card (Not available in all locations)
User's Guide, Monitor Driver, Natural Color software, MagicTune software

D-sub Cable

Power Cord

DVI Cable (option)

MENU button [ ] MagicBright [ ]
Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently six different modes are available: Custom, Text, Internet, Game, Sport and Movie. Each mode has its own pre-configured brightness value. You can easily select one of six settings by simply pressing MagicBright control button. 1) Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. 2) Text For documentations or works involving heavy text. 3) Internet For working with a mixture of images such as texts and graphics. 4) Game For watching motion pictures such as a game. 5) Sport For watching motion pictures such as a sport. 6) Movie For watching motion pictures such as a DVD or Video CD. >>Click here to see an animation clip

Brightness button

When OSD is not on the screen, push the button to adjust
[ ] Adjust buttons [ Enter button [ ] / Source button
brightness. ] Adjust items in the menu. Activates a highlighted menu item. / Push the ' ', then selects the video signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.) Note : If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable. Use this button for auto adjustment. Use this button for turning the monitor on and off. / This light glows blue during normal operation, and blinks blue once as the monitor saves your adjustments.
AUTO button Power button [ ]/ Power indicator
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
(The configuration at the back of the monitor may vary from product to product.)
POWER IN DVI IN RGB IN ON [ | ] / OFF [O] Kensington Lock
Connect the power cord for your monitor to the power port on the back of the monitor. Connect the DVI Cable to the DVI port on the back of your monitor. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. Switch the monitor on and off. The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately. ) For using a locking device, contact where you purchase it.

5. 6. 7. 8. 9. 10.

If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux Operating System To execute X-Window, you need to make the X86Config file, which is a type of system setting file. Press Enter at the first and the second screen after executing the X86Config file. The third screen is for setting your mouse. Set a mouse for your computer. The next screen is for selecting a keyboard. Set a Keyboard for your computer. The next screen is for setting your monitor. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) 8. Set a vertical frequency for your monitor. (You can enter the frequency directly.) 9. Enter the model name of your monitor. This information will not affect the actual execution of X-Window. 10. You have finished setting up your monitor. Execute X-Window after setting other requested hardware. 1. 2. 3. 4. 5. 6. 7.

Natural Color

One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the color of the the printed or scanned images. For more information, refer to Help (F1) in the software program. How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the program Natural Color will be executed. Click Natural Color on the initial screen to install the Natural Color software. To install the program manually, insert the CD included with the Samsung monitor into the CDROM Drive, click the [Start] button of Windows and then select [Run.] button. Enter D:\color\eng\setup.exe and then press the <Enter> key. (If the drive where the CD is inserted is not D:\, enter the applicable drive.)
How to delete the Natural Color software program Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program." Select Natural Color from the list and then click the "Add/Delete" button.

1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [AUTO]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are adjusted automatically.
Description When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. (Available in analog mode only)
To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. - If auto adjustment does not work properly, press AUTO button again to adjust picture with more accuracy. - If you change resolution in the control panel, auto function will be executed automatically.

Locked

Description After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can adjust only the brightness and contrast of the monitor with the OSD adjustment locking feature.

MagicBright

Menu MagicBright
Description Push the MagicBright button to circle through available preconfigured modes. - Six different modes (Custom/Text/Internet/Game/Sport/Movie)

Brightness

Menu Brightness
Description When OSD is not on the screen, push the button to adjust brightness.

SOURCE

Menu SOURCE
Description Selects the video signal while the OSD is off.
Picture Color Image OSD Setup Information
Brightness MagicColor Coarse Language Auto Source
Contrast Color Tone Fine H-Position Image Reset Color Control Sharpness V-Position Color Reset Gamma H-Position Transparency V-Position Display Time

Picture

Description You can use the on-screen menus to change the brightness according to personal preference.

Play/Stop

Direct Access Feature : When OSD is not on the screen, push the button to adjust brightness.

[MENU , MENU]

Contrast
You can use the on-screen menus to change the contrast according to personal preference.

[MENU , , MENU]

Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left. 3) Full - Displays not only vivid natural color but also more realistic natural skin color with clearness. 4) Intelligent - Displays vivid natural color with clearness.

Adjusts of the monitor image color. You can change the monitor color to your desired color. R- G - B
The process through which the colors of your choice are optimized and maintained. You will find Calibration MagicTune extremely useful if you are one of those who wish to view images with their full details accurately reproduced - including web images and ones produced by a digital camera or scanner.
MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. 1. 2. 3. 4. 5. OFF : Returns to the original mode. DEMO : The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left. Full : Displays not only vivid natural color but also more realistic natural skin color with clearness. Intelligent : Displays vivid natural color with clearness. MagicZone The MagicZone ensures the clear and sharp display of animated multimedia or photo
images by enhancing the brightness, sharpness, saturation, Hue of a certain area on the screen. This offers an easy-to-use interface that highlights the video-playing portion of your multimedia program by automatically detecting and highlight the desired area by dragging. When the mouse cursor is activated( )and it is necessary to de-activate it to use it for other tasks, right click your mouse, or put the activated cursor ( )on the taskbar and click. When de-activated, the icon on the screen changes back to the one shown before activation. Especially, MagicZone is appropriate to using the moving picture. Auto Detect : If you run the Movie in some players, MagicZone will automatically get the play screen highlighted (it will be supported in players of Gom, Adrenalin, KCP, Window Media, and Power DVD etc., )Some other players also can be highlighted but could have some problems. Tusk menu HUE Adjust the tint of the color.
Saturation Adjusts the color saturation. Brightness Adjusts the Brightness. Sharpness Zone Off Reset Adjusts the difference between the lightest and darkest areas of the display. Turn off the zone that you have captured. Returns to the the default setting that vendor has set.
Depending on the monitor models Color Control, Sharpness, Contrast, Color Tone, Brightness will not be adjustable in MagicColor mode of Full and Intelligent. MagicTune will be disappear if you excute MagicZone, and closing the MagicZone after adjusting, will show the MagicTune again. (System Tray is Unhecked) MagicTune will be disappear if you excute MagicZone, and closing the MagicZone after adjusting. will not show MagicTune again. (System Tray is Checked) MagicColor mode will be different according to monitor models. MagicZone mode will show if the monitor supports the function.

4. 5. 6.

Visit the MagicTune website for technical support for MagicTune, FAQs (questions and answers) and software upgrades.
The current computing system is not compatible with MagicTune. Please press OK and click on the "Shortcut to the MagicTune site" to view our home page for further reference. An error may occur when your video/graphic card is not in the 'Available' list. (The latest or oldest video cards may not be compatible.)
Please visit our homepage to see the Troubleshooting section.
An error may occur if the card maker has modified the video card driver or the graphics chip even when the video card is in the list.
Check if your monitor is manufactured by Samsung. Products from other manufacturers may cause errors.
Only Samsung products are able to support this feature.
An error may occur even when your monitor is manufactured by Samsung but is out of date. Check if your monitor is able to support MagicTune.
This feature is only supported by those monitors that are registered on our homepage. Check for the monitor before purchasing it as out-of-date models are not supported.
An error occurs when no information on EDID (Extended Display Identification Data) exists for the current monitor. This happens when from your desktop, Start > Setup > Control Panel > System > Hardware > Device Manager > Monitor is selected, the current "Plug-and-play monitor" is removed and new hardware is searched for but the system couldn't find any "Plug-and-play monitor".
An error occurs when replacing the monitor with a new one when the system power is off but the system has not been restarted.
Please restart the system each time the monitor is replaced before using MagicTune.
An error occurs when the video card driver is not installed properly. This happens when the current video card list is not displayed normally. You can check this via Start > Setup > System > Hardware > Device Manager > Display Adapter.
Visit the video card maker's homepage and download and install the latest driver. For more information about the video card, contact the card manufacturer.
To ensure normal operation, please restart your system. An error occurs when the system is not restarted after installing MagicTune. (This is for Win98SE and WinMe only.)
Restart the system before use.
For the best performance of MagicTune, adjust to the optimal resolution. Refer to the User Guide for the optimal resolution. If you do not adjust to the optimal resolution and perform Color Calibration, the monitor cannot be adjusted to the optimal condition.

Refer to the manual for the optimal resolution.
This video card does not support MagicTune. Please install a new video card driver. An error occurs when the video card driver is not installed properly. This happens when the current video card list is not displayed normally. You can check this from Start > Setup > System > Hardware > Device Manager > Display Adapter.
Visit the video card manufacturer's homepage and download and install the latest driver. For more information about the video card, contact the card manufacturer.
As the Highlight program uses the communication lines, please exit the Highlight program before you can access MagicTune. Some of Samsung CDT monitors support the Highlight feature. When using both the Highlight feature and MagicTune simultaneously, conflicts occur, which cause errors.
Make sure to turn OFF Highlight before using MagicTune.
MagicTune may not work in case monitor is replaced or driver of graphic card is updated while MagicTune is operating. If so, please restart the system. Symptom Check when MagicTune does not function properly. Check List MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play. Solutions * To check whether your PC is available for MagicTune feature, follow the steps below (When Windows is XP); Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager -> Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware. MagicTune is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with
the graphic card, visit our website to check the compatible graphic card list provided.
http://www.samsung.com/monitor/MagicTune
MagicTune doesn't work properly. Have you changed your PC or video graphic card? Download the latest program. The program can be downloaded
http://www.samsung.com/monitor/MagicTune.
Visit the MagicTune website for technical support for MagicTune, FAQs (questions and answers) and software upgrades. Visit the MagicTune website and download the installation software for MagicTune MAC.

Check List

Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.

Set the video card by referring to the video card manual. Adjust screen image position and size using the OSD. Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes).
The screen suddenly has become unbalanced.
Have you changed the video card or the driver? Have you adjusted the resolution or frequency to the monitor?
The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD. The screen is out of focus or OSD cannot be adjusted. LED is blinking but no images on the screen. Have you adjusted the resolution or frequency on the monitor? Is the frequency properly adjusted when checking the Display Timing on the menu? Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes). Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes. (The maximum frequency per resolution may differ from product to product.) There are only 16 colors shown on the screen. The screen colors have changed after changing the video card. Have the Windows colors been set properly? Windows ME/2000/XP: Set the colors properly at the Control Panel Display Settings. Set the video card by referring to the video card manual.
Has the video card been set properly?
There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found". Check when MagicTune does not function properly.
Have you installed the monitor driver? See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play.
Install the monitor driver according to the Driver Installation Instructions. Install the monitor driver according to the Driver Installation Instructions.
* To check whether your PC is available for MagicTune feature, follow the steps below (When Windows is XP); Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager -> Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware. MagicTune is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune
MagicTune doesn't work properly.

This box appears during normal operation if the video cable becomes disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly.
Warning Messages If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.
Environment The location and the position of the monitor may influence the quality and other features of the monitor. 1. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room. 2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor.
Useful Tips A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. Judging the monitor's working condition If there is no image on the screen or a "Not Optimum Mode","Recommended Mode 1680 x Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on. If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition. In this case, check the computer for trouble.

General

General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 8 bit color (16.7 M) Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog, Compliant Digital RGB 0.7 Vp-p 5%, TTL level (V high 2.0V, V low 0.8V) Maximum Pixel Clock 156 MHz Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz Signal Cable 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Power Consumption Less than 55 watts 1680 x 1050@60 Hz 1680 x 1050@60 Hz 31 ~ 81 kHz 56 ~ 75 Hz 22" Diagonal (55.9 cm) 477.7 mm (H) x 300.1 mm (V) 0.282 mm (H) x 0.282 mm (V) a-si TFT active matrix SyncMaster 225BW
Dimensions (WxDxH)/ (Without Stand) 504.7 x 65.8 x 335.1 mm / 19.9 x 2.6 x 13.2 inch Dimensions (WxDxH)/ Weight (Lowest HAS) 504.7 x 219.8 x 408 mm / 19.9 x 8.7 x 16.1 inch , 6.9 kg / 15.2 lbs VESA Mounting Interface 100 x 100 mm Environmental considerations Operating Storage Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. For example, the number of TFT LCD sub pixels that is contained in this product are 5,292,000. Note: Design and specifications are subject to change without prior notice. Class B Equipment (Information Communication equipment for residential use) This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.) Operating Temperature : 50 F~ 104 F ( 10 C ~ 40 C) Humidity : 10% ~ 80%, non-condensing Storage Temperature : -4 F~ 113 F ( -20 C ~ 45 C) Humidity : 5% ~ 95%, non-condensing

Middle East & Africa SOUTH AFRICA U.A.E (SAMSUNG) 800SAMSUNG (7267864) http://www.samsung.com/za http://www.samsung.com/mea
Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called Vertical Frequency or Refresh Rate. Unit: Hz Example :If the same light repeats itself 60 times per second, this is regarded as 60 Hz. Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Interlace and Non-Interlace Methods Showing the horizontal lines of the screen from the top to the bottom in order is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs. Plug & Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. Resolution The number of horizontal and vertical dots used to compose the screen image is called 'resolution'. This number shows the accuracy of the display. High resolution is good for performing multiple tasks as more image information can be shown on the screen. Example :If the resolution is 1680 x 1050 , this means the screen is composed of 1680 horizontal dots (horizontal resolution) and 1050 vertical lines (vertical resolution).

For Better Display

1. Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. Resolution: 1680 x 1050 Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. For example, the number of TFT LCD sub pixels that is contained in this product are 5,292,000. 3. When you clean the monitor and the panel outside, please apply the recommended small amount of cleaner by using soft and dry cloth and polish it. Let LCD area not to be forced but to be scrubbed out softly. If excessive force is applied, you can have a stain on it.

4. If you are not satisfied with the quality of the picture, you can get better quality of the picture by executing "auto adjustment function" in display screen that is appeared as window termination button is pressed. If there's still noise after automatic adjustment, use FINE/COARSE adjustment function. 5. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time.

Authority

Information in this document is subject to change without notice. 2006 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.
MXICO IMPORTADO POR: SAMSUNG ELECTRONICS MXICO. S.A. de C.V. Va Lopez Portillo No. 6, Col. San Fco. Chilpan Tultitln, Estado de Mxico, C.P. 54940 Tel: 01-55-5747-5100 / 01-800-726-7864 Samsung Electronics CO.,LTD. 416, Mae tan-3dong, Yeongtong - gu, Suwon City, Gyeonggi-do Korea

EXPORTADO POR:

PRODUCT INFORMATION (Image Retention Free)
LCD Monitors and TVs may have an image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate a correct usage of LCD products in order to protect them from Image retention. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. What is Image retention ? During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD,are subject to image retention. This is not a product defect. Please follow the suggestions below to protect your LCD from image retention Power Off, Screen Saver, or Power Save Mode Ex) Turn the power off when using a stationary pattern. - Turn the power off for 4 hours after 24 hours in use - Turn the power off for 2 hours after 12 hours in use Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. Set the Monitor to power off with the PC Display Properties Power Scheme. Suggestions for specific applications Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems We recommend that you follow set up of your display system program as below: Display Information together with Logo or Moving image cycle. Ex) Cycle : Display Information for 1 hour followed by a Display Logo or moving image for 1 minute. Change the Color Information periodically (Use 2 different colors). Ex) Rotate the Color Information with 2 colors every 30 minutes.