6.5" WVGA Touch Screen Monitor

TME-S370

OWNER'S MANUAL Please read before using this equipment. MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. MANUAL DE OPERACIN Leealo antes de utilizar equipe.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda Shinagawa-ku Tokyo 141-0031, Japan Phone 03-5496-8231
ALPINE electronics of australia pty, ltd.
161-165 Princess Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 Wilhelm-Wagenfeld-Str. 1-Munich, Germany Phone 089-640
ALPINE Electronics (Europe) GmbH
(RCS PONTOISE B 280) 98, Rue de la Belle Etoile, Z.I. paris Nord II, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989
ALPINE ELectronics France S.a.r.l.
ALPINE Electronics of America, inc.
19145 Gramercy Place Torrance, California 90501 U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE Electronics of Canada, Inc.
777 Supertest Road Toronto, Ontario M3J 2M9 Canada Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE House Fletchamstead Highway, Coventry CCV4 9TW, U.K. Phone 0870-763
ALPINE electronics of u.k., ltd.
Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781

ALPINE Italia S.p.a.

ALPINE ELECTRONICS DE ESPAa, S.A.
Portal de Gamarra 36, Pabelln, Vitoria (Alava)-APDO 133, Spain Phone 945-283588
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6, 1930 Zaventem, Belgium Tel.: 02-725 1315
Designed by Alpine Electronics of America, Inc. Printed In China

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.
SERIAL NUMBER: INSTALLATION DATE: INSTALLATION TECHNICIAN: PLACE OF PURCHASE:
290533_TME370_r13.indb ii

7/29/09 1:29:12 PM

ENGLISH Contents

Operating Instructions

WARNING
Warning.. 2 Caution.. 2 Precautions.. 3

Information

In Case of Difculty..15 Specications..17 Accessories..17

Getting Started

Location of Controls..4 Turning Power On and Off..4 Adjusting the Volume and Mute.4 Switching the Source.5
Installation and Connections
Warning.. 18 Caution.. 18 Precautions. 19 Mounting Options..19 Connections..20 Lock-out Function..21
Auxiliary Device Operation
DVD Video Player Operation (Optional)..6 iPod Operation (Optional).7 DVD-HU Operation (Optional).7 DVB-T Operation (Optional Europe Only)..8 Menu Control Screen..8 TV Operation (Optional)..9 Sirius TV Operation (Optional)..9 Display Mode..10
General Setups..11 System Setup Operations..11 AUX Setup Operations.12 Navigation Setup Operations.13 Camera Setup Operations.13 Display Setups..14 Reset Display Setting.15
290533_TME370_r13.indb E1 7/29/09 1:29:12 PM
This symbol means important instructions. Failure to heed them can result in serious injury or death. INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED.

It is dangerous (and illegal in many states) for the driver to watch TV/Video while driving a vehicle. Installing this product incorrectly enables the driver to watch TV/Video while driving. This may cause a distraction, preventing the driver from looking ahead, thus causing an accident. The driver or other people could be severely injured.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, re or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may result in re, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in re or electric shock.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in re, electric shock or other injury.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching video may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR BAG.
If the unit is not installed correctly, the air bag may not function correctly and may cause an accident and injuries.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
290533_TME370_r13.indb E2

PRECAUTIONS

Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Temperature

Be sure the temperature inside the vehicle is between +45C (+113F) and 0C (+32F) before turning your unit on.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

Installation Location

Make sure the TME-S370 will not be installed in a location subjected to: Direct sun and heat High humidity and water Excessive dust Excessive vibrations After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal. In cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal. Operation of some of the functions of this unit is very complex. Because of this, it was deemed necessary to place these functions into a special screen. This will restrict operation of these functions to times when the vehicle is parked. This ensures the focus of the drivers attention will be on the road and not on the TME-S370. This has been done for the safety of the driver and passengers. The setup operation cannot be made if the car is moving. The car must be parked and the parking brake must be engaged for the procedure described in the Owners Manual to be valid. The warning Operation is not allowed while driving, will be displayed if any attempts are made to perform these operations while driving.
290533_TME370_r13.indb E3 7/29/09 1:29:12 PM

Location of Controls

6 Built-in Speaker
Outputs sound for AUX and Navigation guidance.

7 AMPS Mounting Hole

Universal AMPS accessory is available in any third party dealer.
8 Locking Connector to the hideaway box
Connects to the hideaway box. Make sure to lock properly. 1 2

Turning Power On and Off

Press POWER to turn on the unit. Press and hold POWER for 2 seconds to turn off the unit.
Some operations cannot be performed while the vehicle is in motion. In order to operate, enable lockout function. See page 21 for details.
Adjusting the Volume and Mute
Adjust the volume level by pressing.
Turn the volume up to turn Off mute.

1 Remote IR Receiver

The IR receiver receives the remote IR command from the remote controller of connected devices.

2 Ambient Light Sensor

Changes the LCD backlight and the soft-touch key backlit automatically, when the surrounding brightness changes.

If Changing Sound Output (HU Vol. Control) (page 12) is set to on, you can adjust HU speaker volume. The volume control bar disappears after 3 seconds once the volume operation is completed. The volume bar does not indicate when the HU volume control mode is on.

3 Volume Buttons

Adjust the volume level by pressing the or buttons. AUX and Navigation independently controls volume. -For details, refer page 12.

4 SOURCE Button

Returns to Source Select screen.

(POWER)/Mute

Turns the monitor power On and Off. The monitor power turns Off when press and hold the power button for 2 seconds. Power button changes to red in standby mode. Turns Mute on when press the power button, when the unit is turned on. The mute icon appears on the screen.
290533_TME370_r13.indb E4 7/29/09 1:29:12 PM

Switching the Source

4 SETUP
The System Setup screen is displayed.
Touch the desired source on Source Select screen.
For details, refer to Setup (page 11).
The AUX Input screen is displayed. The name given as the source name in Source Name under AUX Setup Operation on page 12 is displayed. Refer to the section titled Auxiliary Device Operation on page 6 for details.

2 Nav (Navigation)

The Navigation screen is displayed. For navigation operation, refer to the Owner's Manual for the navigation system. Refer to page 13 for Navigation Setup Operation.

3 Rearview Camera

Camera input is displayed, when the car is in reverse gear OR the rearview camera is selected on Source Select screen. For operation, refer to the Owner's Manual for the rearview camera. Refer to page 13 for Camera Setup Operation. To enable to use reverse wire, camera interrupt must be on reverse. See page 13 for detail.
290533_TME370_r13.indb E5 7/29/09 1:29:13 PM
If an ALPINE device is connected to AUX, the device is controllable from the unit. This section explains how to operate representative devices. This operation cannot be performed while the vehicle is in motion. In order to display AUX input, enable lock-out function. See page 21 for details.
Finds the beginning of track/chapter. Touching and holding plays fast-reverse.

Pauses and plays back.

Finds the beginning of a track/chapter. Touching and holding plays fast-forward.
PRE- STOP/STOP Switch DISC (Alpine DVD Changer only) Switch DISC (Alpine DVD Changer only)
DVD Video Player Operation (Optional)
Operable when optional Alpine DVD Player/DVD Changer is connected. When DVD is selected in Source Name under AUX Setup Operation (page 11), DVD is displayed in Source Select screen. Refer to owner's manual of DVD video player for details.
Displays the Menu Control screen. See page 8 for detail. Press and hold function is for future product control.
Touch the display panel to display the operation control bar.
The operation control bar changes to the visual screen in the DVD mode for 5 seconds after an operation has been performed. Touch the display panel to display the operation control bar again. 9
Page Change Switches between page 1 and page 2 of operation control bar. Display Mode Setting Wide/Cinema/Normal See page 10 for details. Audio The sound switches between the alternate audio tracks recorded on the disc each time the button is pressed. The selected alternate track becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not include that track, the disc's default language is selected instead. Not all discs will allow changing the alternate audio tracks during playback. In these cases, select audio tracks from the DVDs menu. There may be a delay before the selected alternate track begins to play. Sub Title (Sub.T) The Sub Title switches between the languages recorded on the disc and OFF each time the button is pressed. There may be a delay before the selected subtitle appears. No all discs will allow changing the subtitles during playback. In these cases, select subtitles from the DVD's menu.
290533_TME370_r13.indb E6 7/29/09 1:29:13 PM
The selected subtitle language becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not include that language, the disc's default language is selected instead. For some discs, the subtitles will be displayed even when this is set to off.
DVD-HU Operation (Optional)
Operable when optional Alpine DVD-HU is connected. When DVD-HU is selected in "Source Name" under AUX Setup Operation (page 12), DVD-HU is displayed in Source Select screen.
Angle The angle switches between the angles recorded on the disc, each time the button is pressed. Some time may be required for the angle to change. Depending on the disc, the angle may switch in one of two ways. - Seamless: The angle switches smoothly. - Non-seamless: When the angle is switched, a still picture is displayed rst, after which the angle switches. Repeat Chapter/Track/Title Repeat Playback Shufe Shufes through audio tracks Power Turns the DVD Player/Changer on or off.

Touch the display panel to display the operation control bar. The operation control bar changes to the visual screen in the DVD-HU mode for 5 seconds after an operation has been performed. Touch the display panel to display the operation control bar again.
iPod Operation (Optional)
The function is same as DVD Video Player operation. The function requires the iPod interface box, KCE-415i (USA/Europe model), KCE-425i (Europe model). See owner's manual for details. Feature is limited depending on the iPod interface box.

1 Source

Switches DVD-HU source (AM/FM radio, CD/DVD, etc.). See page 6 for a description of additional button functions.
290533_TME370_r13.indb E7 7/29/09 1:29:13 PM
DVB-T Operation (Optional Europe Only)
Operable when optional Alpine DVB-T is connected. When DVB-T is selected in "Source Name" under AUX Setup Operation (page 12), the DVB-T is displayed in Source Select screen. Refer to owner's manual of DVB-T for details.

9 Display Mode Setting

See Display Mode on page 10 for details.

Menu Control Screen

The operation control bar changes to the visual screen in the DVB-T mode for 5 seconds after an operation has been performed. Touch the display panel to display the operation control bar again. 2

1 RETURN

Sends to return command to the source device.
This function is same as source remote control, up, down, right and left buttons.
Returns to the previous screen of monitor menu.
Decreases channels one by one.

4 MENU

Sends the Menu command to the source device.
Decreases the preset numbers one by one.

5 ENTER

Enters the selected item. Operation may differ depending on the connected device. Refer to owner's manual of the connected device.

2 TUNE

Changes the tuning way (manual mode <CH> and preset number <Fav>).
Increases channels one by one.
Increases the preset numbers one by one.

4 Scan

This initiates the auto seek mode.

Adjusts the Camera display setting. Refer to page 14 for details. Returns to the factory default settings of Camera setup. The message, "Restore default settings?" appears. Touch "Restore" to go back to the default settings.
Setting Output of the Rearview Camera Interruption
Off / On Off: In this mode, the rearview does not appear on the screen whenever the vehicle is placed in reverse gear. In this mode, the screen switches to rearview screen whenever the vehicle is placed in reverse gear.
AUX operation cannot be performed while the vehicle is in motion. When the navigation destination is set, the navigation interrupts the AUX screen that is currently displayed whenever navigation guidance is made.
Off: The navigation guidance will not interrupt the AUX screen and audio.
Flipping the Screen Horizontally

Off / On

Voice: The navigation voice interrupts the AUX sound. Video: The screen switches to the Navigation screen whenever navigation guidance is made.
This function allows you to see the rearview as a mirror image on the screen.
Off: On: The images on the screen appear normally. The images on the screen appear mirrored.
Setting Delay Timing of the Navigation Guidance Interruption (Nav Interrupt Delay)
Off / 5 sec / 10 sec / 15 sec Off: The Navigation screen returns to the screen after guidance is complete.
Flipping the Screen Vertically
5 sec: The Navigation screen disappears 5 seconds after guidance is complete. 10 sec: The Navigation screen disappears 10 seconds after guidance is complete. 15 sec: The Navigation screen disappears 15 seconds after guidance is complete.
This function is useful if the camera is mounted upside down.
Off: On: The images on the screen appear normally. The images on the screen appear upside down.

Setting Region Manually

USA / Europe
You can switch the navigation region manually.
290533_TME370_r13.indb E13 7/29/09 1:29:15 PM

Display Setups

Its easy to customize the unit to suit your preferences.

Vehicles ignition is off. If connected according to the instructions, the unit will not operate with the vehicles ignition off. Improper power lead connections. Check power lead connections.
Adjusting Picture Sharpness
Soft (-15) to Hard (+15) (Default Setting: 0)
Touch [ ] or [ ] adjust the sharpness or clarity of the edge of an object appearing on the screen. When it reaches the minimum or maximum sharpness level, the display shows Soft or Hard, respectively.

Visual EQ Mode

Off (Default Setting) / Night Movie / Soft / Sharp / High Contrast Off: Night Movie: Soft: Sharp: The default setting. Suitable for movies containing dark scenes. Suitable for CGs and animated lms. Suitable for old movies where images are not clearly shown.
High Contrast: Suitable for recent movies.
No sound or unnatural sound.
Connections are not properly or securely made. Check the connections and rmly connect.
When any picture setting is changed, the Visual EQ item name is changed to Custom.

Screen not displayed.

Reset Display Setting
Reset only affects the individual display setup sources. Any picture setting can be reset without affecting the other settings. When pressing the Reset button, the message, "Reset display values to default?" appears. Press "Reset" to go back to the factory setting.
Brightness control is set at the minimum position. Adjust the Brightness control. Temperature in the vehicle is too low. Increase the vehicles interior temperature to operation temperature range. Connections to the DVD, navigation system are not securely made. Check the connections and rmly connect.
Navigation system inoperative.
Connections to the navigation system are incorrect. Check the connections with the navigation system and connect the cables correctly and rmly.
290533_TME370_r13.indb E15 7/29/09 1:29:15 PM

No picture is produced.

Monitors mode is not switched to the mode you want to see. Switch to the mode you want to see. Make sure your input device is connected.

Caution Display

Picture is unclear or noisy.
Vehicles battery power is weak. Check the battery power and wiring. (The unit may malfunction if the battery power is sunder 11 volts with a load applied.)
Spots or dotted lines/stripes appear.
Caused by neon signs, high-voltage power lines, Walkie-Talkie or cell phone, other vehicle's ignition plugs, etc. Change the location of your vehicle.

Picture Off For Your Safety Message Appears.
Whenever the hand brake is off, the AUX screen turns to black and the message appears. Park the vehicle and set the hand brake. See page 21, Lock-out Function.
Cant Operate While Driving Message Appears.
Whenever the hand brake is off, the setup menu turns to black and this message appears. Park the vehicle and set the hand brake. See page 21, Lock-out Function.
290533_TME370_r13.indb E16 7/29/09 1:29:16 PM

Specications

MONITOR SECTION
Screen Size Resolution Operation System 6.5 inch WVGA TFT active matrix

Accessories

Check accessory parts
Touch-Display Monitor Hideaway Box with Cable
Number of Picture Elements 1,152,000 pcs. Effective Number of Picture Elements Illumination System 99.99% or more x1 LED Power Connector Parking Wire x1

GENERAL

Power Requirement Operation Temperature Storage Temperature 14.4 V DC (1116 V allowable) -10C (+14F) to +60C (+140F) x1 -20C (-4F) to +75C (+167F) x1
CHASSIS SIZE (Monitor section)
Width Height Depth Weight (Monitor Section) 178 mm (7") 100 mm (3-15/16") 36 mm (1-7/16") 385 g (12.44 oz)

HIDEAWAY BOX

Width Height Depth 88 mm (3-7/16") 60 mm (2-3/8") 28 mm (1-1/8")
Due to continuous product improvement, specications and design are subject to change without notice. The LCD panel is manufactured using an extremely high-precision manufacturing technology. Its effective pixel ratio is over 99.99% meaning that it is possible that 0.01% of the pixels could be either always ON or OFF.
290533_TME370_r13.indb E17 7/29/09 1:29:16 PM
Before installing or connecting the unit, please read the following and pages 2 to 3 of this manual thoroughly for proper use.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF CHILDREN.
MAKE THE CORRECT CONNECTIONS
Failure to make the proper connections may result in re or product damage.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
Be sure to use only the specied accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in re or electric shock.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in re.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause re etc.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.
290533_TME370_r13.indb E18 7/29/09 1:29:16 PM
Be sure to disconnect the cable from the () battery

Mounting Options

Mounting the Monitor on the Dashboard Using a Bracket
The bracket is not included. Ask your dealer to make a custom bracket that is suitable for your vehicle.
post before installing your TME-S370. This will reduce any chance of damage to the unit in case of a short-circuit. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicles electrical system. When making connections to the vehicles electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the TME-S370 to the fuse box, make sure the fuse for the intended circuit of the TME-S370 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer. The TME-S370 uses female RCA-type jacks for connection to other units having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance. The Display must be completely retracted in the casing when installing. If it is not, problems may occur.

Mount the bracket using the screws (M5 x 8). Mount the bracket on back side of the monitor.
Mount the monitor with bracket attached in the car.
Attaching the Monitor and Stand
CAUTION Do not install the monitor near the front passenger seat air bag system. You can purchase an aftermarket monitor stand. Mount the monitor by following the installation manual for the monitor stand.
Mounting Monitor at Headrest
Ask your dealer to install the headrest cup kit or headrest pole bracket.
290533_TME370_r13.indb E19 7/29/09 1:29:16 PM

Connections

ACCESSORY Red

ACCESSORY Battery

GND Black REMOTE OUT White/Brown M.CONT White/Pink REVERSE Orange/White FOOT BRAKE Yellow/Black HAND BRAKE Yellow/Blue PARKING BRAKE Yellow/Blue M.CONT REMOTE OUT

White/Brown

White/Pink
Connects to Alpine video device. See page 6 for AUX device options.
To the reverse gear. Use only when rearview camera is connected.
To the foot brake lead or brake lamp lead. (USA only) To the handbrake indicator lead (USA only) To the parking brake indicator lead. Separate cable is included for parking brake.
Rearview Camera HCE-C105 (Sold separately)

To S-Video

Navigation System (Sold separately)
DVD Changer DHA-S690, etc (Sold separately)
290533_TME370_r13.indb E20 7/29/09 1:29:16 PM
ACC (+12V) GND REMOTE M-CONT REVERSE FOOT BRAKE HAND BRAKE PARKING BRAKE
Red Black White/Brown White/Pink
Connect to vehicle accessory / ignition Connect to vehicle ground line Remote out for controlling peripherals Monitor Control activate while S3 remote function is used
Orange/White Switch to rearview camera screen Yellow/Black Yellow/Blue Yellow/Blue Enables displaying video or operating setup (For front use) Enables displaying video or operating setup (For front use) Enables displaying video or operating setup (For rear use) For USA, parking brake wire pin is for rear seat entertainment use. It is not connected at factory for US model. The wire pin is included in a bag with a caution note. For other regions, parking brake wire pin is connected at factory. Foot and hand brake wires are not necessary.

9 = A B C

POWER CONNECTOR RGB CABLE CAMERA INPUT TERMINAL S-VIDEO CABLE RCA EXTENSION CABLE

Lock-out Function

To watch AUX device or operate setup functions, the Lock-out needs to be disabled. To do this, follow the procedure below.
Bring your vehicle to a complete stop at a safe location. Engage the hand brake. Keep pushing the foot brake and release the hand brake once then engage it again. When the hand brake is engaged for the second time, release the foot brake.

Now, the locking system for the AUX mode operation has been released. Engaging the hand brake can reactivate the AUX mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of "Lock-out Function". If you try to activate the auxiliary device while driving, the display will show the warning-Picture Off For Your Safety.
290533_TME370_r13.indb E21 7/29/09 1:29:16 PM