M1224FX

User Guide and Reference Manual
6/S. Eastern Ave Los Angeles, CA 90040 www.AmericanAudio.us
MAIN FEATURES....2 ELECTRICAL PRECAUTIONS....3 SAFETY PRECAUTIONS....5 INTRODUCTION....6 SET-UP PRECAUTIONS....6 Unpacking.....7 quick start.....7 CONTROLS and FUNCTIONS CHANNEL CONTROL.....8 MAIN CONTROL....11 INPUT & OUTPUT CONNECTIONS....14 Connectors....16 HOME/STUDIO RECORDING SET-UP....18 LIVE PERFORMANCE SET UP....19 effects list....20 CLEANING.....22 Troubleshooting.....22 WARRANTY.....23 SPECIFICATIONS....24

CONTENTS

4 Mono & 4 Stereo Channel Inputs Stereo Main Outputs & ALT 3/4 Output 3-Band EQ, 1 Aux with Pre/Post Switch, 1 EFX, BAL, Mute, & PFL for Stereo Input Trim With Peak LED, HPF, 3-Band EQ, 1 Aux With Pre/Post Switch, 1 EFX, Pan, Mute, & PFL Switch for Mono Input Trim With Peak LED, HPF (CH 5-8) Main L/R With AFL Switch, ALT 3/4 With AFL, To Main Switch, AUX & EFX Send, AUX & EFX Return Tape With PFL Switch, HP/Control Room & Phantom Power 24-Bit DSP Effect, 100 Presets, EFX On/Off & EFX Level Tape With PFL Switch, HP/Control Room & Phantom Power 6 XLR Mic/Inputs XLR & 1/4 Phone Jack Balanced & 1/4 Phone Jack for Mono Input XLR & 1/4 Phone Jack For Stereo (Ch 5-8) & 1/4 Phone & Phono Jack For Stereo Input 1/4 Phone Jack For Stereo Return & Phono Jack For Tape In 1/4 Phone Jack For Main, ALT 3/4, Aux Send, EFX Send, Control Room & Headphone Phono Jack For Tape & 1/4 Phone Jack For Footswitch

American

M1224FX

Main Features

Audio - www.americanaudio.us - M1224FX Instruction Manual Page 2
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN, LIQUIDS, OR MOISTURE
ELECTRICAL SAFETY PRECAUTIONS
The serial and model number for this unit is located on the rear panel. Please write down the numbers here and retain for future reference. Model No._____________________________
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER TYPE OF ELECTRICAL OUTLET UNLESS THE WIDE BLADES CAN BE CAREFULLY INSERTED INTO A MATCHING WIDE SLOT. ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.
Serial No._____________________________ Purchase Notes: Date of Purchase_______________________ Dealer Name__________________________ Dealer Address_________________________ _____________________________________ _____________________________________ Dealer Phone__________________________
NOTE: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electrical appliances such as radios and televisions, use shielded cables and connectors for connections.
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 3
M1224FX ELECTRICAL PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER SERVICE TO YOUR AUTHORIZED AMERICAN AUDIO SERVICE TECHNICIAN. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

REad iNSTRUCTiONS All the safety and operating instructions should be read before the product is operated. RETaiN iNSTRUCTiONS The safety and operating instructions should be retained for future reference. HEEd WaRNiNGS All warnings on the product and in the operating instructions should be adhered to. FOLLOW iNSTRUCTiONS All operating and use instructions should be followed. CLEaNiNG The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. aTTaCHMENTS Do not use attachments not recommended by the product manufacturer as they may cause hazards. WaTER aNd MOiSTURE Do not use this product near water for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. aCCESSORiES Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. CaRT A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
IMPORTANT SAFETY INSTRUCTIONS
GROUNdiNG OR POLaRiZaTiON If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. POWER-CORd PROTECTiON - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTdOOR aNTENNa GROUNdiNG If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A. LiGHTNiNG For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. POWER LiNES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. OvERLOadiNG Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

OBJECT aNd LiQUid ENTRY - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. SERviCiNG Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. daMaGE REQUiRiNG SERviCE - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or damaged in any way. When the product exhibits a distinct change in performance this indicates a need for service. REPLaCEMENT PaRTS -- W hen replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. SaFETY CHECk - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. WaLL OR CEiLiNG MOUNTiNG The product should not be mounted to a wall or ceiling. HEaT The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
vENTiLaTiON Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. POWER SOURCES This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. LOCaTiON The appliance should be installed in a stable location. NONUSE PERiOdS The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
ELECTRIC SERVICE EQUIPMENT
GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC NATIONAL ELECTRICAL CODE

Fig. A

Audio - www.americanaudio.us - M1224FX Instruction Manual Page 4
1. For adult use only - Keep out of the reach of children. 2. Water and Moisture - The player should not be used near water - for example, near a bath tub, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc. Do not spill water or other liquids in to or on to your mixer. 3. Ventilation - The Mixer should be situated so that its location or position does not interfere with its proper ventilation. For example, the Mixer should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 4. Heat - The Mixer should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 5. Power Sources - The Mixer should be connected to a power supply (wall outlet) only of the type described in the operating instructions or as marked on the Mixer. 6. Servicing -The user should not attempt to service the Mixer beyond that described in the operating instructions. There are no user serviceable parts inside. All other servicing should be referred to qualified service personnel. The Player should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged. B. Objects have fallen, or liquid has been spilled into the Mixer. C. The Mixer has been exposed to rain or water. D. The Mixer does not appear to operate normally or exhibits a marked change in performance. 7. Never disassemble or modify your unit in any way, doing so will void your manufactures warranty.

SAFETY PRECAUTIONS

8. Never plug this mixer in to a dimmer pack. 9. Do not let insecticides, benzene, or thinner come in contact with the surface of the unit. 10.This unit is intended for indoor use only, use of this product outdoors voids all warranties. 11.Always mount this unit in safe and stable matter. 12.Disconnect from main power before making any type of connection. 13.Cleaning - The mixer should be cleaned only as recommended by the manufacturer. Use a soft cloth to wipe down the outside of the unit. For stubborn stains moisten a soft cloth with glass cleaner or other mild detergent to wipe away any stains. Use a soft cloth to wipe any residual cleaner. Never use volatile cleaners uch as benzene, solvent, or thinner to clean s your unit, these cleaners will damage the units surface. 14.Handle the power supply cord carefully. Do not damage or deform; it may cause electric shock or malfunction when used. Hold plug attachment when removing from wall outlet. Do not pull on the cord. 15.To avoid electric shock, do not open the top cover when the unit is plugged in. If problems occur with the unit, call American Audio customer support. 16.Do not place metal objects or spill any liquids inside or on the mixer. Electric shock or malfunction may occur. 17.Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the mixer. Route your power cord out of the way of foot traffic. 18.Always have the trim controls set to their lowest level during initial power-up to prevent speaker damage.

Audio - www.americanaudio.us - M1224FX Instruction Manual Page 5

Introduction

Introductions: Congratulations and thank you for purchasing the American Audio M1224FX mixing
console. This mixing console is a representation of American Audios continuing commitment to produce the best and highest quality audio products possible at an affordable price. Please read and understand this manual completely before attempting to operate your new mixer. Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Take special care to follow all warning symbols and labels both on the unit and printed in this manual. Also, Please keep this manual with the unit, for future reference. Customer Support: American Audio provides a toll free customer support line, to provide set up help and answer any question should you encounter problems during your initial set up or operation. You may also visit us on the web at www.americanaudio.us for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:30 p.m. Pacific Standard Time. Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: support@americandj.com To purchase parts online visit http://parts.americandj.com Caution! There are no user serviceable parts inside this mixer. Do not attempt any repairs yourself, without being instructed to do so by an authorized American Audio service technician. Doing so will void your manufactures warranty. In the unlikely event your mixer may require service, please contact American Audio customer support. Do not discard the packing carton in the trash. Please recycle when ever possible.

Set-Up Precautions

Please be sure to make any connections before plugging the mixer in to an electrical outlet. All fader and volume controls should be set to zero or minimum position, before the mixer is switched on. If the mixer has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on the mixer immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature. Operating Determinations: When installing this mixer, please make sure that the device is not exposed or will not be exposed to extreme heat, moisture or dust! Do not operate the mixer in extremely hot (more than 30/100F) or extremely cold (less than 5C/40F) surroundings. Keep the unit out of direct sunlight and away from heaters. Operate the mixer only after becoming familiar with its functions. Do not permit operation by persons not qualified for operating the mixer. Most damages are the result of unprofessional operation! Do not attempt to operate this mixer if the power cord has been frayed or damaged. Disconnect from main power before making any type of connection. Do not attempt to operate this mixer, if it becomes damaged in any way. Never operate this mixer when its covers are removed. To reduce the risk of electrical shock or fire, do not expose this mixer to rain or moisture. This mixer is intended for indoor use only, use of this product outdoors voids all warranties. During long periods of non-use, disconnect the mixers main power.

channel controls and functions cont.

CONTROL HIGH MID LOW

MAX. BOOST/CUT 15dB 12dB 15dB
FREQUENCY 12kHz 2.5kHz 80Hz
TYPE Shelving Peaking Shelving
4. AUX CONTROLS - The AUX knobs control the signal level that the channel sends to AUX bus. 5. PRE/POST BUTTON - This button determines if the AUX signal is Pre Fader (signal level is not affected by fader position) or Post Fader (signnal level is affected by the fader position). 6. EFX CONTROL - These knobs control the signal levels sent to the EFX bus. The channel signals mixed by this bus have their overall level set by the MASTER EFX SEND control to the EFX jack located on the front top panel. Since the control is place after the channel fader, the signal level will be affected by the channel faders setting. NOTE: The Effect bus signal is also fed into the internal DSP (digital signal processor).
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 9
7. PAN/BALANCE CONTROL PAN (Mono Control) - This control pans the channel signal across the master L and R buses, therefore determining the ideal position of the sound from that channel. EXAMPLE: If the PAN control is set all the way to the left, the sound from that channel will only be projected from the left speaker only. Same goes for the control being set all the way to the right, only from the right speaker. BALANCE (Stereo Control) - This control lets you adjust the balance of the L/R position, of the stereo input signal. Turning this knob to the left moves the source signal towards the MAIN MIX L bus, turning the knob to the right sends the signal towards the MAIN MIX R bus. 8. MUTE/ALT 3/4 BUTTON - When the corresponding channels MUTE/ALT 3/4 button is not active (depressed) the channel output will be sent to the ALT 3/4 output, and not the MAIN L/R output. The ALT 3/4 bus gives you a second independent stereo sub mix with its own sub master stereo fader. 9. PFL BUTTONS - This button allows you to monitor the PRE FADER LEVEL input signal through headphones or the control room outputs. When the button is NOT pressed the channel signal will be sent to the PFL bus. 10. CHANNEL FADERS - Thes faders are channels main level control. These faders control the signal level sent from the channel to the master mixing, group outs, and effect buses. The settings of the input channel faders affect the mix or the sound level balance between the instruments or other sources connected to the inputs. When a channel is not being used, the fader should be set at the minimum position to prevent any unwanted noise added to the main signal.

Audio - www.americanaudio.us - M1224FX Instruction Manual Page 10
main controls and functions MAIN CONTROL SECTION

15 Effects List

Audio - www.americanaudio.us - M1224FX Instruction Manual Page 11
MAIN CONTROL SECTION: 11. DSP PROGRAM DISPLAY - This displays shows the number of the selected effect. Please see the effect list located on the MAIN CONTROL SECTION of the mixing console. 12. DSP PROGRAM SELECT KNOB - The program knob wil allow you to select one of the 100 built-in digital effects. This control board has a 24 Bit digital high quality effect processor. 13. AUX PRE CONTROL - Use this control to adjust the signal level sent from the internal digital effect to the AUX bus. 14. stereo return control AUX RETURN - Use the corresponding control knobs to adjust the signal level of the mixed L/R signal sent from the RETURN jack (L & R MONO) to the AUX bus. main control - Use the corresponding control knobs to adjust the signal level of the mixed L/R signal sent from the RETURN jack (L & R MONO) to the MAIN L/R bus. 15. MASTER SEND CONTROLS AUX CONTROL KNOBS - Use this control knob to adjust the signal level sent to the AUX output jack. MASTER EFFECT CONTROLS - Use this knob to adjust the signal level of the EFFECT bus sent to the EFFECT output jack. 16. TAPE IN CONTROL - This knob controls the playback signal level from the component that is connected to the TAPE IN RCA JACKS located on at the top panel of the mixing board. 17. DSP ON/OFF BUTTON - This button turns the internal effect program on/off. 18. PFL BUTTON - Pressing this button In will allow you to send the effect signal to the PFL bus. 19. EFX RTN FADER - With this fader you can adjust the signal level sent from the digital effect to the MAIN bus. 20. alt 3/4 fader - With this fader you can adjust the final combined stereo signal level that is sent to the ALT 3/4 output jacks. 21. POWER INDICATOR - This indicator will light when mixer power switch is turned on. 22. PHANTOM POWER BUTTON - When this button is pressed In, the mixer will supply power to all channels the provide XLR MIC input jacks. Use this function when using one or more condensor microphones. Note: When this function is active, the mixer supplies DC +48V power to pins 2 and 3 of all XLR type MIC input jacks. Leave this switch off if you do not need phantom power. When you turn this function on, make sure that only condenser MICs are connected to the XLR input jacks. Devices other then condensor MICs may be damaged if connected to the phantom power supply. The switch may be left on when connecting to balanced dynamic microphones. To avoid damage to speakers, be sure to turn off the amplifier (on powered speakers) before turn- ing this function on or off. Also, to avoid loud noises that could cause hearing loss or device damage, we recommend that you turn all out controls (MAIN, master fader, ALT 3/4 fader etc.) to the minimum settings before activating this function.

main controls and functions cont.
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 12
23. LEVEL METER - This LED displays the signal level of the selected LEVEL METER SIGNAL BUTTON. When the meter lights up RED then the output is hitting the clipping level. 24. CONTROL ROOM/HEADPHONE CONTROL - This controls the signal level that is sent to the CONTROL ROOM JACKS or HEADPHONE JACK. 25. LEVEL-METER SIGNAL BUTTONS - Use these buttons to select the signal that is sent to the CONTROL ROOM outputs and/or HEADPHONE output. The ouput level will be shown in the LEVEL METER. Please see the illustration below to see how the button settings correspond to the signal selection.
Signal Switch PFL TAPE IN ALT3 / 4

TAPE IN

ON C-R OUT & PHONES

ALT3/4

OFF OFF
26. TO MAIN BUTTON - When this button is pressed In (On), the mixer will send the signal from the ALT 3/4 to the MAIN L/R outputs. 27. MAIN L/R FADERS - This fader adjusts the final signal level sent to the MAIN L/R output.
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 13
INPUT AND OUTPUT CONNECTIONS
40 INPUT AND OUTPUT CONNECTIONS: 28. CHANNEL INPUT JACKS MIC JACKS - These are balanced 3-pin XLR-type input jacks.
BALANCED LINE IN JACKS - These standard 1/4 TRS phone jack are used for balanced or unbalanced line level signals. Some examples of line level equipment include most electronic keyboards, synthesizers, turntables (with appropriate pre-amps), tape decks and line outputs from other mixers. 29. CHANNEL stereo Input jacks - These are unbalanced stereo line input jacks. The two jacks provided are 1/4 and RCA. 30. TAPE INPUT JACKS - These RCA jacks are used to connect a stereo sound source. Use these jacks when you want to connect a CD, cassette, or DAT, directly to the mixer for monitoring. Use the TAPE IN control to adjust the signal level. 31. REC OUT JACKS - These jacks send the PRE FADER signal from the master bus to a tape deck for recording.
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 14
32. FOOT SWITCH JACK - You can connect a foot switch to this jack, and use the foot jack to toggle the digital effects on/off. 33. ALT 3/4 OUPUT JACKS - These unbalanced 1/4 phone type jacks output the ALT 3/4 signal to the input of a MTR, external mixer, or other device. 34. CONTROL ROOM OUTPUT JACKS - These stereo 1/4 phone type output jacks send the mixed signal to a monitoring system. Use the CONTROL ROOM/HEADPHONE CONTROL to adjust the output signal level. The signal monitored by these jacks is select by the using the LEVEL METER SIGNAL BUTTONS. 35. HEADPHONE JACK - Use this jack to connect headphones to the mixing board. NOTE: The signal monitored by these jacks is select by the using the LEVEL METER SIGNAL BUTTONS, the TAPE IN CONTROL and the PFL BUTTON on the input channels. 36. MAIN L/R OUTPUT JACKS - These jacks deliver a stereo output signal to a amplifier or powered speakers. You can also use these outputs to send a signal you wish to record. You can control the signal level control using the MAIN FADER located in the MASTER CONTROL section. 37. AUX OUTPUT JACK - This 1/4 output jack send a signal from the AUX bus to a cue box, effector, or other monitoring system. 38. EFX OUTPUT JACK - This unbalanced phone output jack sends a signal to an external effect machine. 39. STEREO RETURN L (MONO) - These are unbalanced 1/4 TRS phone-type line input jacks. The signal received by these jacks is sent to the MAIN bus and AUX bus. These jacks are typically used to receive a return signal from an external effector (reverb, delay, etc.) 40. CHANNEL INSERT I/O JACK - These are 1/4 TRS (tip, ring, sleeve) phone jacks that support bi-directional operation. These input/output jacks are located between the head-amplifier and the high pass filter. These jacks can be used to independently connect these channels to devices such as graphic equalizers, compressors, and noise filters. NOTE: Connection to an I/O jack requires a special separately-sold insertion cable. Please see the illustration below.

Left Signal Right Signal Ground Seeve Tip
Unbalanced Input/Output AUX Send

2 Pole (Mono) Jack

Signal Ground
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 16
Connector and Cable Configurations
REMOTE DEVICE DESCRIPTION
White(Red)/HIGH 2 A. XLR** 3 1
REMOTE SIDE OF CABLE (Connector Type)

Black/LOW 1

Shield/GND
Floating or Balanced low impedance: most professional equipment line in and line out, microphones.

T B. TRS PHONE

White(Red)/HIGH R S

White(Red)/HIGH

Black/LOW
Unbalanced C. STANDARD low impedance: some PHONE professional equipment and microphones.

S Shield/GND

White(Red)/HIGH T S D. STANDARD PHONE
Unbalanced high impedance: most hi-fi equipment.

Shield/GND 1

White(Black)/HIGH T S Shield/GND S T

E. SHIELD/GND PHONE

(Standard Phone)
Connector and cable configurations are recommended for use with the M 4 bus series. These cables are based on the use of auxillary equipment that is isolated from the AC power mains.
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 17

home studio Set-Up

Setup Procedure: 1. Before connecting to microphones and instruments, be sure that all devices are turned off. Also be sure that all of the mixers channel fader and master control faders are set all the way down. 2. For each connection, connect one end of the cable to the relevant microphone or instrument and connect the other end to the appropriate input jack on the mixer. NOTE: Where an input channel provides both a MIC INPUT jack and a LINE INPUT jack, you may use either one of these jack but you may not use both at the same time. Please connect to only one of these jacks on each channel. 3. To avoid causing damage to speaker, power up the devices in the following order: Peripheral devices mixer power amps (or powered speakers). NOTE: When shutting the system down, turn off the power in the opposite order: Power amps (powered speakers) mixer Peripheral devices.
Sound Source(CD,MD,DAT, Cassette,Video etc.)
PROGRAM EJECT POWER STOP PLAY/PAUSE LEVEL

REPEAT

COMPACT DISC PLAYER

MIN MAX

Master Recorder(MD,DAT.)

PROGRAM EJECT

Synthesizer

PLAY/PAUSE

MTR Foot Switch

LINE 9

LINE 11

REC OUT

FOOT SWITCH LINE 10 LINE 12

ALT 3/4 OUTPUT

CONTROL ROOM

LINE 5

LINE 7

AUX HEADPHONE

INSERT

LINE 6

LINE 8

LINE 10

LINE 12

AUX RETURN

MAIN OUTPUT

Microphone

OUT IN

Effector Effector

Rhythm Machine

Guitar

Powered Monitor Speakers
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 18

Live Performance Set-Up

Monitor Speakers (Internal) CD Player
Guitar CD,Cassette,or DAT Recorder Power Amp

Microphone Foot Switch

Effector

Power Amp

Stage (Internal) Main Speakers (External)
AUX (PRE ) Audience(External)
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 19

Program No.(Hex)

00h 01h 02h 03h 04h 05h 06h 07h 08h 09h 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 20h 21h 22h 23h 24h 25h 26h 27h 28h 29h 30h 31h 32h 33h 34h 35h 36h 37h 38h 39h 40h 41h 42h 43h 44h 45h 46h 47h 48h 50h 51h 52h

Effect Description

Effects List

Efx Level Room Size

8.00mc 36.78mc 9.00mc 8.00mc 9.00mc 8.00mc 8.00mc 30.61mc 12.11mc 35.75mc 8.00mc 9.00mc 8.00mc 9.00mc 8.00mc 9.00mc 9.00mc 9.00mc 9.00mc 9.00mc 8.00mc 8.00mc 8.00mc 45.00mc 45.00mc 8.00mc 8.00mc 45.00mc 45.00mc 36.78mc 9.00mc 8.00mc 8.00mc 9.00mc 9.00mc 9.00mc 9.00mc 9.00mc 9.00mc 9.00mc 8.00mc 8.00mc 8.00mc 8.00mc 8.00mc 8.00mc 8.00mc 8.00mc 8.00mc 34.72mc 34.72mc 29.58mc

Effect Name

Medium Bright Plate 78.00% Best Plate 63.00% Medium Dark Spring 13.00% Short Plate 78.00% Long Bright Spring 13.00% Performance Slapback 2 100.00% Slapback w verb 91.00% Echo-Verb echo long verb 28.00% Slow st chor 100.00% Hall best hall 2 78.00% Short Hall 44.00% Short Dark Hall 35.00% Short Bright Hall 35.00% Medium Hall 27.00% Medium Dark Hall 21.00% Hall Medium Bright Hall 27.00% Long Hall 13.00% Long Dark Hall 21.00% Long Brigh Hall 27.00% Best Hall 58.00% Short Plate 78.00% Short Dark Plate 78.00% Short Bright Plate 78.00% Long Bright Plate 26.00% Medium Dark Plate 78.00% Plate Medium Bright Plate 78.00% Medium Plate 78.00% Long Plate 78.00% Long Dark Plate 52.00% Best Plate 63.00% Short Spring 13.00% Short Dark Spring 13.00% Short Bright Spring 13.00% Medium Spring 13.00% Medium Dark Spring 13.00% Spring Medium Bright Spring 13.00% Long Spring 13.00% Long Dark Spring 13.00% Long Bright Spring 13.00% Best Spring 13.00% Slapback 2 100.00% Short Echo 80.00% 420ms Delay High Feedback 100.00% 420ms Delay Low Feedback 100.00% Echo 550-275ms Delay cross Feedback 100.00% 550ms Delay High Feedback 100.00% 550ms Delay Low Feedback 100.00% 650-375ms Delay cross Feedback 100.00% 650ms Delay High Feedback 100.00% American Audio - www.americanaudio.us - M1224FX Instruction Manual Page 20 Flanger Reverb 100.00% Flanger Short reverb 100.00% It Flanger Medium Reverb 99.00%

44h Echo 45h 46h 47h M1224FX 48h 50h 51h 52h 53h 54h Flanger+Verb 55h 56h 57h 58h 59h 60h 61h 62h 63h 64h Chorus+Verb 65h 66h 67h 68h 69h 70h 71h 72h 73h 74h Echo+Verb 75h 76h 77h 78h 79h 80h 81h 82h 83h 84h Chorus 85h 86h 87h 88h 89h 90h 91h 92h 93h 94h Flanger 95h 96h 97h 98h 99h
550-275ms Delay cross Feedback 100.00% 8.00mc 550ms Delay High Feedback 100.00% 8.00mc 550ms Delay Low Feedback 100.00% 8.00mc 650-375ms Delay cross Feedback 100.00% List Cont. 8.00mc Effects 650ms Delay High Feedback 100.00% 8.00mc Flanger Reverb 100.00% 34.72mc Flanger Short reverb 100.00% 34.72mc It Flanger Medium Reverb 99.00% 29.58mc Medium Flanger Medium Reverb 100.00% 18.28mc Slow Flanger Long Reverb 100.00% 29.58mc Flanger Long Reverb 100.00% 29.58mc Stereo Flanger Medium Reverb 100.00% 29.58mc Stereo Flanger Long Reverb 100.00% 29.58mc Whip Flanger Short Reverb 100.00% 21.36mc Whip Flanger Long Reverb 100.00% 29.58mc Slow Chorus Short Reverb 100.00% 30.61mc Slow Chorus Medium Reverb 100.00% 36.78mc Slow Chorus Long Reverb 100.00% 36.78mc Medium Chorus Medium Reverb 79.00% 29.58mc Medium Chorus Long Reverb 79.00% 29.58mc Fast Chorus Short Reverb 100.00% 30.61mc Fast Chorus Long Reverb 100.00% 29.58mc Trem Chorus Medium Reverb 100.00% 31.64mc Trem Chorus Long Reverb 100.00% 36.78mc Big Chorus Medium Reverb 100.00% 29.58mc Echo-Verb 1 33.00% 17.25mc Hard echo Medium verb 32.00% 26.50mc Echo-Verb 2 53.00% 40.89mc Echo-Verb 4 37.00% 28.56mc Echo-Verb 3 23.00% 45.00mc Pre delay serial 48.00% 29.58mc Cross echo 72.00% 8.00mc Echo long verb 28.00% 30.61mc Echo cross verb 29.00% 30.61mc Echoverb 18.00% 37.81mc Chorus 1 100.00% 8.00mc Chorus 2 100.00% 11.08mc Chorus fast 100.00% 8.00mc Deep slow chorus 100.00% 8.00mc Deep fast chorus 72.00% 8.00mc Medium slow chorus 100.00% 8.00mc Slow stereo chorus 100.00% 8.00mc Leslie 100.00% 8.00mc Medium leslie 100.00% 8.00mc Stereo chorus 100.00% 8.00mc Slow It Flange 100.00% 41.92mc It Flanger 100.00% 8.00mc Deep slow flanger 100.00% 41.92mc Deep It flanger 100.00% 41.92mc Deep lazer flanger 100.00% 41.92mc Jet flanger 1 100.00% 41.92mc Jet flanger 2 100.00% 41.92mc Medium flanger 100.00% 8.00mc Medium lazer flanger 100.00% 41.92mc Strong flanger 100.00% 41.92mc
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 21

Cleaning

Dust will settle in the fader track overtime dust can cause a popping noise on the fader. To prevent this cover you mixer. If the mixer has been unused for over a month or more move you faders up and down a couple of times this will move most of the settle dust from the fader track. Do not eat, drink, or smoke over you over or near the mixer. Dont use spray cleaners. Use compressed air or a vacuum with a brush accessory. Cleaning frequency depends on the environment in which the mixer operates (i.e. smoke, fog residue, dust, dew).

TROUBLESHOOTING

Trouble Shooting: Listed below are common problems you may encounter, and solutions. I cant hear the source from a channel thru the main mix Check the trim knob, fader, and output volume on your source. Check the Mute button, or make sure your sub groups are assigned to the mains. Check you connection from the source to the mixer. Try the same connection on a different channel with the same settings. I hear noise in mix Check your power a 60Hz hum, could come from ungrounded equipment. Turn all the faders down one at a time and the stereo return knob. If the noise goes away its that channel or the source. Disconnect the source from the mixer bring up that fader if the noise is gone it your source, If it is the source try bringing down its out put volume. I have no power Make sure your power supply is properly hooked up to the unit. I cant hear the mix on my headphones or my control room monitors Check the phones / control room knob, Select the proper source.

Audio - www.americanaudio.us - M1224FX Instruction Manual Page 22

Warranty

The M1224FX carries a one year limited warranty. We recommend you fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a R.A. (return authorization) number. If the mixer is under warranty, you must provide a proof of purchase invoice. You may obtain a R.A. number by contacting our customer support team on our toll free number. Please contact American Audio customer support at (800) 322-6337
for a R.A. number. All package not displaying a R.A. number on the outside of the package will be returned to the shipper. 1-YEAR LIMITED WARRANTY A. American Audio hereby warrants, to the original purchaser, American Audio products to be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owners responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the American Audio factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, American Audio will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, American Audio shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which American Audio concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American Audio factory unless prior written authorization was issued to purchaser by American Audio; if the product is damaged because not properly maintained as set forth in the instruction manual. D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specified above, American Audio will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American Audio under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American Audio. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. E. American Audio reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American Audio in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumers and or Dealers sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American Audio be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. G. This warranty is the only written warranty applicable to American Audio Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

Audio - www.americanaudio.us - M1224FX Instruction Manual Page 23
Model: M1224FX Power supply:

Specifications

AC 115v~60Hz/230v~50Hz
Single Voltage: AC 100V, 50/60Hz (Japan); AC 110V, 60Hz (Colombia) AC 120V, 60Hz (U.S.A. and Canada); AC 127V, 60Hz (Mexico) AC 220V, 50Hz (Chile and Argentina); AC 240V, 50Hz (Australia) AC 220V, 60Hz (Philippines and Korea) AC 230V, 50Hz (Europe, U.K., New Zealand, South Africa, and Singapore)
420mm (W) x 328mm (D) x 90mm (H) 16.5 (W) x 12.9 (D) x 3.54 (H) 7.49 Lbs. / 3.4 Kgs. 36W 5 to 35 deg. C; Humidity: 25 to 85% RH (non-condensing); Storage Temperature: -20 to 60 deg. C +26dB (Main L/R), +20dB (ALT 3/4, Aux/EFX, & Control Room) +20dB (Insert), More than 100mW (Headphones) @ 33 20Hz ~ 20kHz, +1/-2dB (Mix L/R, ALT 3/4, Aux/EFX Send, & Control Room) <0.1% @ +14dB 20Hz ~ 20kHz (Mix L/R, ALT 3/4, Aux/EFX Send, & Control Room) 74dB 74dB 66dB 76dB 76dB 80dB 52.2dB 54dB 54dB 46dB 56dB 56dB 60dB 44dB 44dB 16dB 20dB
Dimensions: Weight: Power Consumption: Operating Temperature: MAXIMUM OUTPUT LEVEL (0.5% T.H.D. AT 1kHz): FREQUENCY RESPONSE: T.H.D. (Total Harmonic Distortion): MAXIMUM VOLTAGE GAIN: MIC IN to MAIN L/R: MIC IN to ALT 3/4: MIC IN to AUX (PRE): MIC IN to AUX (POST): MIC IN to EFX (REV): MIC IN to CONTROL ROOM L/R: MIC IN to REC L/R: LINE IN to MAIN L/R: LINE IN to ALT 3/4: LINE IN to AUX (PRE): LINE IN to AUX (POST): LINE IN to EFX (REV): LINE IN to CONTROL ROOM L/R: STEREO IN to MAIN L/R: STEREO IN to ALT 3/4: AUX RETURN IN to MAIN L/R: TAPE IN to MAIN L/R:
HUM AND NOISE [(AVERAGE RS = 150) (Master Fader At Nominal Level & All Channel Faders At Minimum)]: MIX L/R, ALT 3/4, AUX/EFX SEND, CONTROL ROOM OUT: -127dB Equivalent Input Noise, -95dB Residual Noise MIX L/R, ALT 3/4, AUX/EFX SEND, CONTROL ROOM OUT: -88dB CHANNEL INDICATORS: PEAK: An indicator for each channel turns on when the pre-channel fader signal is 5dB below clipping. INTERNAL DIGITAL EFFECT: LED METERS:
100 Selectable Presets/Foot Switch Controlable 10-Segment LEDx2, Main L/R, ALT 3/4, PFL, & Tape IN
Audio - www.americanaudio.us - M1224FX Instruction Manual Page 24
INPUT CHANNEL EQ: HIGH: MID: LOW: TURNOVER/ROLL OFF FREQUENCIES:
12kHz Shelving 2.5kHz Peeking 80Hz Shelving Located 3dB Below Maximum Boost/Cut 40dB Variable (-20db ~ +20dB)
GAIN CONTROL (MONO/STEREO COMBINATION INPUT CHANNEL): GAIN CONTROL (MONO INPUT CHANNEL): CROSSTALK (at 1kHz):

-INPUT

NOW Supports SDHC Cards!

MAIN ADVANTAGES:. No external Hard drives. No expensive laptops.No extra MP3 players. No complicated software to learn. Now supports High Capacity SD Cards (SDHC)** SDJ-1 MAIN FEATURES:. Dual SD card slot for full functioning MP3 player (currently shipping models that support High Capacity SD Cards (SDHC)**. Folder Search. Auto BMP. Seamless Loop. Easy to use. Full playback control similar to most Pro CD players. Tempo Lock. Fast, Simple & Reliable. Great for Drops. Fader Q Start. Pitch Control (+/-4%, +/-8% or +/-16%). Pitch Bend. Advanced cueing with track search by frame. S/PDIF digital output for each player. Bright LCD display Single/Continue, Time viewing and MP3 track listings. Up to 1000 MP3 songs on a 1G SD card* (4GB SD card not included / MP3 recorded at 128 bit rate)*. Dimensions (LxWxH): 19 x 3.46x 4.25 / 482 x 88 x 108. Weight: 4 lbs. / 1.8 kgs

CK- 1 000

pr ofessional mp3 /cd player /mixer

CK - 0

CD/MP3 PLAYERS
M P3 / C D P L AY E R S M A I N F E AT U R E S. Plays MP3, CD & CD-R discs. Display shows track (song) title and artist when a MP3 disc is played (ID3TAG). Advanced cueing with track searching by frame (not by each second). Advanced Track Search by track (song) title or by Folder Search. Quick MP3/CD recognition. TAP sync BPM. Tempo Lock. Instant Start. Digital Scratch FX. TAP Button for manual BPM. Anti Shock (20 sec. per side). +10 track advance button. Seamless loop. BOP effect. Q-Start. Pitch range: +/- 4%, +/- 8%, +/- 16%. Selectable elapsed, remain & total remaiming time display. Single or continuous play
M I X E R M A I N F E AT U R E S. 2 Channel Pro mixer built-in. Inputs: 2 CD (built-in), 2 Line, 1 Aux, 1 Mic. Bass, Mid, Treble & Gain adjustment for each channel. Master Level, Mic Level, Cue Pan & Cue Level adjustment. Stream Flow LED indicators for each channel. Flip Flop On/Off button Relay playback between two CD Players. Auxiliary input on face Mini Jack great for Portable MP3 players or satellite radio receivers
R E A R PA N E L F E AT U R E S. XLR Balanced XLR Outputs. Digital Output (S/PDIF). 2 additional line inputs. Mic input (XLR or 14 input). Multi-voltage Switch: 115V/60Hz or 230V/50Hz. Power On/Off button. Dimensions (LxWxH): 17.75 x 11.25 x 4.5 / 450x285x110mm. Weight: 13 lbs. / 6 kgs.
M P3 / C D P L AY E R S M A I N F E AT U R E S. Plays MP3, CD & CD-R discs. Quick MP3/CD recognition. Instant Start. Anti Shock (20 sec. per side). +10 track advance button. Loop & Reloop. Q-Start. Pitch range: +/- 4%, +/- 8%, +/- 16%. Selectable elapsed, remain & total remaiming time display. Single or continuous play
C K- C A S E. Compatible with - CK-800 - CK-1000
R E A R PA N E L F E AT U R E S. XLR Balanced. Digital Output (S/PDIF). 2 additional line inputs. Mic input (XLR or 14 input). Multi-voltage Switch: 115V/60Hz or 230V/50Hz. Power On/Off button. Dimensions (LxWxH): 17.75 x 11.25 x 4.5 / 450x285x110mm. Weight: 13 lbs. / 6 kgs.

R AD IU S 100 0

pr ofessional single mp3 /cd player Whether you DJ with CDs or a computer, the American Audio, Radius 1000 will help you achieve the next level! The Radius 1000 is a professional CD/MP3 player with Midi capabilities so DJs can control their favorite music playback software. It features a large 6-inch (150mm) jog wheel, 9 on-board DSP effects, and a large bright display that shows track titles and artist ID tags. Radius 1000 has a red LED visual marker display that rotates around the jog wheel to show the reference point of where the CD/MP3 disc is playing. The Radius 1000 also offers features only found on the highest quality CD Players, such as: Slot load CD Drive, Quick MP3/CD disc recognition, Advanced Track Search (search for a new track while one is playing), 10 seconds of Antishock memory, Seamless Loop, 3 Flash Start buttons, Digital BPM Counter, and Digital Output (S/PDIF).

R AD I U S 0 0

pr ofessional media player Whether you DJ with SD or USB, the American Audio, Radius 2000 will help you achieve the next level! The Radius 2000 is a professional Media player with Midi capabilities so DJs can control their favorite music playback software. It features a large 6-inch (150mm) jog wheel, 9 on-board DSP effects, and a large bright display that shows track titles and artist ID tags. Radius 1000 has a red LED visual marker display that rotates around the jog wheel to show the reference point of where the CD/MP3 disc is playing. The Radius 2000 also offers features only found built in a Media Player, such as: Quick Advanced Track Search (Find a new track while one is playing), 10 seconds of Anti-shock memory, Seamless Loop, 3 Flash Start buttons, Digital BPM Counter, and Digital Output (S/PDIF).
F E AT U R E S Plays MP3, CD & CD-R discs Midi software compatible via USB (Control up to 8 MIDI channels at once) Display shows track titles and artist from ID tags when played Advanced cueing with track searching by frame (not by each second) Quick MP3/CD recognition Track and Folder Search Advanced Track Search: Search for a new track while one is playing PowerTouch advanced digital scratching (with adjustable sensitivity) 2 Scratching modes: Digital Scratch mode, Beat Juggle mode Tempo Lock Instant Start 9 On-board FX: Scratch, Filter, Echo, Trans, Skid, Phase, Flanger, Pan, Bop 6-inch (150mm) Jog Wheel with LED Cue marker and adjustable LED effects 3 mode Jog Wheel: Normal, Scratch, and Auto Cue Scratch(Great for Beat Juggling) Time & Ratio adjustment for digital FX FX sync adjustment Red LED Visual marker display: Reference point to view where the disc is playing Digital BPM Counter: keeps digital FX in sync with music TAP Button for manual BPM Anti Shock (10 sec.) Smart loop: Automatically measures your loop Fader Q Start Independently adjustable Pitch Bend (up to 100%) Sleep Mode (Adjustable in increments of 5 min - up to 120 minutes) 3 Flash Start Buttons with (5 second sample each button) Recall memory of Q-Start and samples Store up to 1500 cue points Digital Output (S/PDIF) Headphone jack on rear with volume control Slot load CD drive Flip Flop Relay playback between two Radius 1000 CD/MP3 Players Dimensions (LxWxH): 10.5 x 14 x 4.25 / 265x356x106 mm Weight: 8 lbs. / 3.6 kgs.

F E AT U R E S. Plays SD, HDSC cards, USB Flash Drives, And FAT Formatted Hard Drives. Midi software compatible via USB (Control up to 8 MIDI channels at once). Display shows track titles and artist from ID tags when played. Advanced cueing with track searching by frame (not by each second). Quick ID tag recognition. Track and Folder Search. Advanced Track Search: Find a new track while one is playing. PowerTouch advanced digital scratching (with adjustable sensitivity). 2 Scratching modes: Digital Scratch mode, Beat Juggle mode. Tempo Lock. Instant Start. 9 On-board FX: Scratch, Filter, Echo, Trans, Skid, Phase, Flanger, Pan, Bop. 6-inch (150mm) Jog Wheel with LED Cue marker and adjustable LED effects. 3 mode Jog Wheel: Normal, Scratch, and Auto Cue Scratch (Great for Beat Juggling). Time & Ratio adjustment for digital FX. FX sync adjustment. Red LED Visual marker display: Reference point to view where the disc is playing. Digital BPM Counter: keeps digital FX in sync with music. TAP Button for manual BPM. Anti Shock (Infinite ). Seamless Loop. Smart loop: Automatically measures your loop (Cut and Stretch with Beat Measure). Fader Q Start. Independently adjustable Pitch Bend (up to 100%). 4 Flash Start Buttons with (5 second sample each button). Recall memory of Q-Start and samples. Store up to 1500 cue points. Digital Output (S/PDIF). Headphone jack on rear with volume control. USB Slot and SD Card Slot. Flip Flop Relay playback between two Radius 2000 CD/MP3 Players. Dimensions (LxWxH): 10.5 x 14 x 4.25 / 265x356x106 mm. Weight: 6 lbs. / 2.72 kgs.
pr ofessional single mp3 /cd player

CDI 500 M P 3

CD I 0 MP3
M P3 F E AT U R E S. Plays MP3, CD & CD-R discs. Display shows track (song) title and artist when a MP3 disc is played (ID3TAG). Advanced cueing with track searching by frame (not by each second). Advanced Track Search by track (song) title or by Folder Search. Quick MP3/CD recognition. Fine Tune B.P.M. adjustment. Advance Track Launch M A I N F E AT U R E S. PowerTouch- Touch sensitive interactive jog wheels Touch Sensitive Adjustment (Patent pending). 2 Scratching modes: Digital Scratch mode, Beat Juggle mode. Digital Scratching 2.0 (Accurate Scratching). Tempo Lock. Instant Start. Reverse play. 9 On-board FX: Scratch, Filter, Echo, Trans, Skid, Phase, Flanger, Pan & Bop. Time & Ratio (wet/dry) adjustment for digital FX. FX sync adjustment. Effect layering. Visual marker display: Reference point to view where the disc is playing. Digital B.P.M. counter: keeps digital FX in sync with music. TAP Button for manual BPM. Anti Shock (30 sec.). Seamless loop. Fader Q Start. +/- 4%, 8%, 16% &100% Hyper Pitch. 3 flash start buttons with (5 second sample each button). Recall memory of Q-Start and samples. Store up to 1500 cue points. Digital Output (S/PDIF). Slot load CD drive. Flip Flop Relay playback between two CD Players. Dimensions (LxWxH): 13.75 x 9.75 x 4.25 / 348x246x106 mm. Weight: 7 lbs. / 3.3 kgs.

M P3 F E AT U R E S. Plays MP3, CD & CD-R discs. Display shows track (song) title and artist when a MP3 disc is played. Advanced cueing with track searching by frame (not by each second). Quick MP3/CD recognition. Folder Search M A I N F E AT U R E S. Digital Scratching 2.0 (Accurate Scratching). Visual marker display: Reference point to view where the disc is playing. Anti Shock (10 sec.). Seamless loop. Fader Q Start. 3 flash start buttons with (5 second sample each button). Tempo Lock. Auto BPM Counter. Hyper Pitch (+/- 4%, +/-8%, +/-16%, +/-100%). Digital output (S/PDIF). Dimensions (LxWxH): 13.75 x 9.75 x 4.25 / 348x246x106 mm. Weight: 7 lbs. / 3.3 kgs.
*May var y depending on bit rate of your MP3 f iles.

CD I 0 MP 3 S Y S T E M

. 2 x CDI-500 MP3 CD Players. 1 x Q-D5 MKII Mixer. CDI System Case & component cables included

CDI 300 MP3 SYSTEM

. 2 x CDI 300 MP3 CD Players. 1 x Q-D6 Mixer. Case & Component cables included

C D I- M P 3

V EL OCI TY
pr ofessional dual mp3 /cd player
M P3 F E AT U R E S. Plays MP3, CD & CD-R discs. Advanced cueing with track searching by frame (not by each second). Quick MP3/CD recognition. Fine Tune B.P.M. adjustment C D I -M P3 M A I N F E AT U R E S. Plays MP3, CD & CD-R discs. Quick MP3/CD recognition. Instant Start. Anti Shock (10 seconds). +10 track advance button. Seamless Loop. Q-Start. Pitch range: +/- 4%, +/- 8%, +/- 16%. Selectable elapsed, remain & total remaining time display. Single or continuous play. Digital Output (S/PDIF). Multi-voltage Switch: 115V/60Hz or 230V/50Hz. Power On/Off button. Dimensions (LxWxH): 11.25 x 8.75 x 4.5 / 285x220x110mm. Weight: 5 lbs. / 2.25 kgs.
V E LO C I T Y M P3 F E AT U R E S. Plays MP3, CD & CD-R discs. Quick MP3/CD recognition. Display show track listing and artist when a MP3 disc is played. Advanced cueing with track searching by frame (not by each second). Advanced Track Search by track (song) title or by Folder Search. Fine Tune B.P.M. adjustment. Cue Point. Advance Track Launch
V E LO C I T Y M P3 F E AT U R E S. PowerTouch** , Touch sensitive interactive jog wheels (**U.S. & foreign patents pending). Digital Scratching 2.0 (Accurate Scratching). 2 Scratching modes: Digital Scratch mode, Beat Juggle mode. 9 On-board FX: Scratch, Filter, Echo, Trans, Skid, Phase, Flanger, Pan, Bop. Effect layering. Digital B.P.M. counter: keeps digital FX in sync with music. 6 Preset Parameters settings for each FX. Tempo Lock (Master Tempo). Parameter Ratio & Time adjustment knobs. Hyper Pitch (+/-4% up to +/-100%). 3 Flash Start Sampler Buttons per side (7 second sample per button with or without a CD in drive)
. Slot Load Dual CD Player. Digital Anti-shock memory. Instant start. Seamless loop. Fader Q Start. Reverse play. Digital output - S/PDIF. Volume control between music and sampler. FX MIX. Store 384 cue points or samples. Flip Flop (Relay playback between two decks). Dimensions MAIN UNIT: 19 x 10 x 3.5 (2 rack spaces) CONTROL UNIT: 19 x 2 x 7 (4 rack spaces). Weight (total): 16 lbs.

PL AY U P TO

O F M P3 M US I C PE R D I S C *

MCD - 0

CDI 100 MP3 S Y S TEM
. 2 x CDI-100 MP3 CD Players. 1 x Q-D1 MKII Mixer. CDI System Case & component cables included
M C D -710 M A I N F E AT U R E S. Plays MP3, CD & CD-R discs. Fader Q Start. +10 track advance button. -10 back track button. MP3 Folder Search. Auto BPM. Tempo Lock. 20 seconds Anti Shock Protection (per side). Flip Flop (Relay Playback). Pitch Control (+/-4%, +/-8% or +/-16%). Pitch Bend. Advanced cueing with track search by frame. S/PDIF digital output for each player. Bright LCD display Single/Continue and Time viewing. Reads CD and CD-R media. Update firmware via CD-ROM. Dimensions (LxWxH): Player unit: 10 x 19 x 3.5 Controller: 2.5 x 19 x 3.5 (2-spaces). Weight:15 lbs.

MC D- 510

D CD - PR O0
pr ofessional dual cd player
N O W W I T H S E A M L E S S LO O P & B U F F E R S TA R T ! M C D - 510 M A I N F E AT U R E S. Plays MP3 and CD discs. Fader Q Start. +10 track advance button. -10 back track button. 20 seconds Anti Shock Protection (per side). Flip Flop (Relay Playback). Pitch Control (+/-4%, +/-8% or +/-16%). Pitch Bend. Seamless Loop. Buffer Start. Advanced cueing with track search by frame. S/PDIF digital output for each player. Bright LCD display Single/Continue and Time viewing. Reads CD and CD-R media. Update firmware via CD-ROM. Dimensions (LxWxH): Player unit: 10 x 19 x 3.5 Controller: 2.5 x 19 x 3.5 (2-spaces). Weight: 15 lbs.

MC D- 110

D C D - P R O0 M A I N F E AT U R E S. Fader Q Start. +10 track advance button. Mechanical Anti Skip Protection. Flip Flop (Relay Playback). Pitch Control (+/-4%, +/-8% or +/-16%). Pitch Bend. S/PDIF digital output for each player. Bright LCD display. Single/Continue and Time viewing. Reads CD and CD-R media. Dimensions (LxWxH): Player unit: 10 x 19 x 3.5 Controller: 2.5 x 19 x 3.5. Weight: 15 lbs. / 6.8 kgs.

CD PLAYERS

pr ofessional mp3 /cd player

M OB I L E 0 PRO SYS

. 1x DCD-PRO310 Dual CD Player. 1x Q-2411 PRO Mixer. 1x TLC 8x4 Road Case. 1x DJ Headphones. 1x DJ Microphone. All component cables needed M C D -110 M A I N F E AT U R E S. Plays MP3 and CD discs. +10 track advance button. -10 back track button. 20 seconds Anti Shock Protection. Pitch Control (+/-4%, +/-8% or +/-16%). Pitch Bend. Advanced cueing with track search by frame. S/PDIF digital output for each player
. Bright LCD display Single/Continue and Time viewing. Reads CD and CD-R media. Update firmware via CD-ROM. Dimensions (LxWxH): Player unit: 10 x 19 x 3.5 (2-spaces). Weight: 9 lbs.

TT- R E CO R D

Q- R ECOR D
pr ofessional turnt able mp3 r ecor der

pr ofessional USB mp3 dj mixer

TURNTABLE MP3 RECORDER

PRO MIXERS
No Computer Needed No Software to Learn Fast and Easy to Use
Have you ever wondered how to get your old vinyl collection transferred to your computer?
Well, wonder no more! The American Audio TT-Record turntable is an easy-to-use solution to record your vinyl records to MP3 format with ease by a push of a button. No software programs to learn; No technical experience is needed; record directly to a USB memory stick. The TT-Record transfers analog recordings to 196 kbps MP3 files.
TT-RECORDER MAIN FEATURES:. Belt-Drive Turntable with easy-to-use analog to digital record function. USB record to MP3 format (128 kbps). Create track breaks by turning On and Off the Record Button. 33/45 RPM selector. +/- 10% Pitch slider. Needle included (headshell and cartridge). 45 RPM Adapter included. Selectable line level/phono level output. Slip mat included. Switchable voltage: 115V/60Hz or 230V/50Hz. Power Consumption: 9-Watts. Dimensions (LxWxH): 17.75 x 14.5 x 5.75 / 449x370x145mm. Weight: 9 lbs. / 3.8 kgs.
USB Flash Drive For Full Functioning MP3 Playback & Record!
Q - R E CO R D M A I N F E AT U R E S. Professional 19-inch 4-channel mixer. USB Flash drive for full functioning MP3 playback & record. 2 Phono, 4 Line, 4 Aux & 2 Mic inputs. Fader Q Start compatible (with select American Audio CD players). Balanced XLR outputs. Mic volume, treble, bass and talkover control. Gain, treble, mid & bass control for each channel (-30 dB Rotary Kills). MP3 recorded at 256kbps. Recessed back panel. Mini plug input on face of mixer for use with MP3 players *(standard 3.5mm plug) *MP3 player not included. Headphone jack on face of mixer. Cue mixing, cue level and master level control. Zone output control. Stream Flow LED meters. Trim output adjustment on rear. Mic attenuator control on rear panel. Power: Switchable AC 115/230V, 60/50Hz, 18W. Dimensions (LxWxH): 19x 7x 4.25 / 482.6 x 177 x 109.6mm - 4 rack spaces. Weight: 8.5 lbs./3.8 kgs.

Q- S D

Q- F XPR O

pr ofessional mp3 mixer

pr ofessional 19-inch mixer
MAIN ADVANTAGES:. No external hard drives. No expensive laptops. No extra MP3 players. No complicated software to learn. Supports up to 4GB SD Card
Q - F X P R O M A I N F E AT U R E S. 2 Phono, 4 Lines, 4 Aux & 4 Mic Inputs. 16-Bit Digital Effects with DSP (Digital Signal Processing). Assignable DSP Effects to Any Channel Including Any Mic Channel. X-Y Parameter Adjustments on ALL DSP Effects. FX include: Pitch Shift, Reverb, Flanger, Auto Filter, Manual Filter, Transform, Echo, Auto Pan. Cue Up on Effects

WOW is a registered trademark of SRS Labs, Inc.
Q -2 P R O M A I N F E AT U R E S. New improved sound quality. 3-channel, 19-inch professional DJ mixer. 2 Phono, 4 Line, 2 Aux, & 2 Mic Inputs. Stream Flow LED indicators on each Ch. Easy access auxiliary input on front of the mixer to plug in MP3 players, or satellite radio receivers. Bass, Mid & Tremble Control and separate volume for Mics. Q-Start. High quality Feather Fader for Smooth, Clean Crossfades (Replaceable). Balanced XLR outputs. Recessed back panel. 2 Zone Outputs. Volume, bass, & treble control for second zone. 3-band EQ per channel (Bass, Mid & Treble). Independent Pan & Gain on each channel. Trim output adjustment on rear. Improved mic circuitry and longer lasting line faders. Dimensions (LxWxH): 7 x 19 x 4 (4 rack spaces). Weight: 8 lbs.

Q -P RO

Q- D 6
pr ofessional 10-inch mixer
Q-D6 M A I N F E AT U R E S. 3-channel Pro DJ Mixer. 2 Phono, 3 Lines, 2 Aux & 1 Mic input. Mini plug input on face of mixer for use with MP3 players & satellite receivers. Balanced Outputs. Fader Q Start Compatible. Gain, Treble, Mid & Bass control for each Ch. (-26 dB Rotary Kills). DJ Mic with Volume, Treble, Bass and Talkover control. Stream flow LED Master Level meters. Cue Mixing, Cue Level and Master Level Control. Extremely clean signal to noise ratio. Dimensions (LxWxH): 12.25 x 10x 3.25. Weight: 7 lbs.

Q-PR O

Q -P R O M A I N F E AT U R E S. New improved sound quality. 4-channel, 19-inch Professional DJ mixer. 3 Phono, 5 Line, 3 Aux & 2 Mic Inputs. Fader Q Start Compatible (with select American Audio CD Players). Balanced XLR Outputs. 5-band EQ. Separate volume for each microphone. High Quality Feather Fader For Smooth, Clean Crossfades (Replaceable). L.E.D. meters. Dimensions (LxWxH): 7 x 19 x 3.75 (4 rack spaces). Weight: 7 lbs.

Q- D 5 MK I I

Q -D5 MKII M A I N F E AT U R E S. 2 Phono, 2 Lines, 2 Aux & 1 Mic input. Optical Crossfader (tested over 1 million times)*. Balanced XLR outputs. Q-Start. Cross Fader curve knob (short to long crossfade) with reverse crossfade button. Independent curve for channels 1 & 2 (short to long curve) with reverse button. Gain, Treble, Mid & Bass control for each channel. -30 dB Rotary Kills for Treble, Mid & Bass. 100% cut buttons for Treble, Mid & Bass. Dimensions (LxWxH): x 12.25 x 10 x 3.25. Weight: 7 lbs.
*The optical fader was factor y tested over 1 m i l l i o n t i m e s b a c k- a n d - f o r t h a n d n e v e r quit working !

(HP 900 & HP 700 Only HP 500 includes 1/4 Right Angle Only)

pr o earbuds

AUDIO ESSENTIALS

HP 7 00

H P M A I N F E AT U R E S. Comfortable, sturdy high-powered headphones. Ultra dynamic range with great sounding high and lows. Flexible housing design allows for double or single ear monitoring; folds up for easy transport. Input: Mini plug with two screw-on 1/4 adapters (Right Angle & Straight plugs). Includes headphone bag
EB 900 M A I N F E AT U R E S. Comfort fit, high powered ear buds. Compact design great for the working professional. Designed for stage use. Includes carrying case. Cord length: 9 ft. / 3 meters
Includes A Pair Of Replacement Earpads
(HP 900, HP 700 & HP 500)
DESIGNED FOR S TA G E USE !

EB 0 HP 5 50

pr o earbuds pr o dj headphones
H P M A I N F E AT U R E S. Comfortable, sturdy high powered headphones. Includes 1 set of extra earpads and a headphones bag. Flexible housing design allows for double or single ear monitoring; folds up for easy transport. Replaceable earpads - Easy to snap on. Input: Mini plug with right angle 1/4 adapter E B M A I N F E AT U R E S. Comfort fit, high powered ear buds with extended bass. Compact design great for the working professional. Includes carrying case. Cord length: 9 ft. / 3 meters

WITH EXTENDED BASS !

WM - 16H H

WM- H H

wir eless micr ophone kit
W M -16 H H S YS T E M I N C LU D E S : Wireless Microphone, Receiver & 12V DC Power Supply W M -16 L AV S YS T E M I N C LU D E S : Wireless Body Pack, Lavalier, Receiver & 12V DC Power Supply
W M - H H S YS T E M I N C LU D E S : Wireless Microphone, Receiver & 12V DC Power Supply W M - L AV S YS T E M I N C LU D E S : Wireless Body Pack, Lavalier, Receiver & 12V DC Power Supply

WM - 16LAV

wir eless bod y pack kit
Hand Held PLL Synthesized UHF Wireless Microphone System Switching diversity (Antenna diversity) Super high sensitivity, low noise transmission and reception Diversity A/B indicators the antenna has received the RF signal AF indicators the audio signal has been received Uni-directional electret condenser unit microphone 16 selectable UHF frequencies Outputs: XLR balanced & unbalanced -inch mono jack Wireless range up to 150 ft. (In standard condition) Freq. channel: 790 - 806MHz, S/N ratio more than 94dB On/Off control on mic On & Low Battery LED indicators Includes small screwdriver inside mic to change frequencies Power Supply: DC 12V~18V for receiver Battery: DC3V (2 x 1.5V AA size batteries) or DC2.4V (2 x 1.2V AA size rechargeable batteries) for transmitter Weight (mic & receiver): 0.95 lbs /.43 kgs Weight (Body Pack, Lavalier & receiver): 0.73 lbs /.33 kgs Dimensions: (Receiver only LxWxH): 6.7x4.17x1.26 / 170x106x32mm

WM- L AV

Hand Held PLL Synthesized UHF Wireless Microphone System Auto-Scan receiver Switching diversity (Antenna diversity) Super high sensitivity, low noise transmission and reception RF level indicators display signal strength AF level indicators display audio signal strength Uni-directional electret condenser unit microphone 64 selectable UHF frequencies Outputs: XLR balanced & unbalanced 6.3mm mono jack Wireless range up to 150 ft. (In standard conditions) Freq. channel: 790 - 806MHz, S/N ratio more than 94dB On/Off control on mic On & Low Battery LED indicators Includes small screwdriver Power Supply: DC 12V~18V (receiver) Battery: DC3V (2 x 1.5V AA size batteries) or DC2.4V (2 x 1.2V AA size rechargeable batteries) for transmitter Weight (mic & receiver):1.52 lbs / 0.69 kgs Weight (Lavalier & receiver):1.30 lbs / 0.59 kgs Dimensions: (Receiver only LxWxH): 8.31x7.09x1.73 / 211x180x44mm
STA G E & S T U D I O KI T
micr ophone / headphone combo kit
S TAG E & S T U D I O M I C K I T I N C LU D E S. 1x DM-302x microphone. 1x 15 ft. Mic Cable (XLR - 1/4). 1x HP 500 professional headphones (including all items in HP 500 kit - see p. 18)

WM- 0 H H

W M -H H S YS T E M I N C LU D E S : Wireless Microphone, Receiver & 12V DC Power Supply W M -L AV S YS T E M I N C LU D E S : Wireless Body Pack, Lavalier, Receiver & 12V DC Power Supply

STU DI O M IC KI T

dual micr ophone kit
S TAG E & S T U D I O M I C K I T I N C LU D E S. 2x DM-302x microphone. 2x 15 ft. Mic Cable (XLR - 1/4). 1x protective carrying case

WM- 0 L AV

Hand Held PLL Synthesized UHF Wireless Microphone System Auto-Scan receiver Switching diversity (Antenna diversity) Super high sensitivity, low noise transmission and reception RF level indicators display signal strength AF level indicators display audio signal strength Uni-directional electret condenser unit microphone 700 selectable UHF frequencies Outputs: 3-pin XLR balanced & unbalanced -inch mono jack Wireless range up to 150 ft. Freq. channel: 471.000 - 481.650MHz, S/N ratio more than 95db On/Off/Mute control on mic On & Low Battery LED indicators Power Supply: DC 12V~18V Weight (mic & receiver): 1.5 lbs /.8 kgs Weight (Lavalier & receiver): 1.5 lbs /.8 kgs Dimensions: (Receiver only LxWxH): 8.11x6x1.75 / 206x165x44mm

PA PACK 1

M822F X PA Mixer Package
POWER MIXERS PA AMPLIFIERS
I N C LU D E S : 1- M 2 F X 2 - PX I 10 P ( s t a n d s n o t i n c l u d e d ) PX I 10 P High-Powered 10-inch, 2-way speaker Built-in 200w high-powered bi-amplifier system 10 woofer with 40oz magnet 1 compression driver Electronic crossover ABS nylon fiber cabinet with handle XLR & RCA line inputs One microphone input (XLR & 1/4 strereo) with separate microphone volume control Sensitivity: 94 2dB/m/w Frequency response: 50-17KHz (10db) Treble, bass and volume output control Trapezoidal design Flyable & stand mountable Blue LED On Indicator on front of unit Dimensions: (LxWxH): 10 x 13 x 18.5 / 260 x 335 x 472 mm Weight: 31 lbs. / 14 kgs. Mounting brackets available
M 2 F X F E AT U R E S : Controls:. 2 Mono & 3 Stereo channels input & stereo main output. Trim with Peak LED, HPF, 3-band EQ, 1 AUX, 1 EFX & PAN for mono input. Trim with Peak LED, HPF (CH3-CH6), 3-band EQ. 1 AUX, 1EFX & balance for stereo input. Main L/R, HP/Control Room, AUX Return, Tape Level & Phantom Power. 24 bit DSP effect 100 presets, EFX ON/OFF & EFX level Input Connectors:. 4 XLR MIC/INPUTS. XLR & 1/4 phone jack balanced & 1/4 phone jack for insert on mono input. XLR & 1/4 phone jack for stereo (CH3-CH6), 1/4 phone & phono jack for stereo input (CH7-CH8). 1/4 phone jack for stereo return & phono jack for Tape Output Connectors:. 1/4 phone jack balanced for main, 1/4 phone jack for AUX, Control Room & Headphone. phono jack for Tape, 1/4 phone jack for Footswitch Indicator:. Peak for each input, level meter & phantom power Specifications M822FX:. Weight (Net): 2.8 kg. Dimensions: (W x H x D) 247 x 65 x 290 mm

PA PA C K 2

M1224F X PA Mixer Package

PA PACK 3

M1624F X PA Mixer Package
I N C LU D E S : 1- M4 F X 2 - PX I 12 P 2 -S P S -1B PX I 12 P High-powered 12-inch, 2 way-speaker Built-in 300w high-powered bi-amplifier system 12 Flat wound cast frame woofer with 70oz magnet 1 compression driver Electronic crossover ABS nylon fiber cabinet with handle XLR & RCA line inputs One microphone input (XLR & 1/4 stereo) with separate microphone volume control Sensitivity: 96.5 2dB/m/w Frequency response: 40-17KHz (-10db) Treble, bass, and volume output control Trapezoidal design Flyable & stand mountable Blue LED On Indicator on front of unit Dimensions (LxWxH): 12 x 15.5 x 22 / 310 x 400 x 554 mm Weight: 53.5 lbs. / 20 kgs.

FACTORY BUNDLES

PX I SE RI E S
professional powered loud speakers
PX I - 8 P S PE C I F I C AT I O N S
. High powered 8-inch, 2-way speaker. 100w Built-in bi-amplifier system. Electronic crossover. ABS nylon fiber cabinet with handle. XLR line inputs: mic / line. Sensitivity: 90 2dB/m/w. Frequency response: 50-17KHz (-10db). Volume output control. Trapezoidal design. Flyable & stand mountable. Blue LED On Indicator on front of unit. Dimensions (LxWxH): 8 x 11 x 15.5 / 213 x 282 x 393mm. Weight: 24 lbs. / 8.9 kgs. Mounting bracket (PXI BR8) sold separately. XLR Output
PX I -10 P S P E C I F I C AT I O N S
. High powered 10-inch, 2-way speaker (with 40oz magnet). Built-in 200w high-powered bi-amplifier system. 1 compression driver. Electronic crossover. ABS nylon fiber cabinet with handle. One XLR & one RCA line input. One microphone input (XLR & 1/4 stereo) with separate microphone volume control. Sensitivity: 94 2dB/m/w. Frequency response: 50-17KHz (-10db). Treble, bass and volume output control. Trapezoidal design. Flyable & stand mountable. Blue LED On Indicator on front of unit. Dimensions (LxWxH): 10 x 13 x 18.5 / 260 x 335 x 472mm. Weight: 31 lbs. / 14 kgs. Mounting bracket (PXI BR10) sold separately. XLR Output
PX I -12 P S PE C I F I C AT I O N S
. High Powered 12-inch, 2-way speaker (12 Flat wound cast frame woofer with 70 oz. magnet). Built-in 300w high-powered bi-amplifier system. 1 compression driver. Electronic crossover. ABS nylon fiber cabinet with handle. One XLR & one RCA line input. One microphone inputs (XLR & 1/4 stereo) with separate microphone volume control. Sensitivity: 96.5 2dB/m/w. Frequency response: 40-17KHz (-10db). Treble, bass and volume output control. Trapezoidal design. Flyable & stand mountable. Blue LED On Indicator on front of unit. Dimensions (LxWxH): 12 x 15.5 x 22 / 310 x 400 x 554mm. Weight: 53.5 lbs. / 20 kgs. Mounting bracket (PXI BR12) sold separately. XLR Output
PX I -15 P S PE C I F I C AT I O N S
. High-Powered 15-inch, 2-way speaker (Flat wound cast frame woofer with 80 oz. magnet). Built-in 400w high-powered bi-amplifier system. 1.75 compression driver. Electronic crossover. ABS nylon fiber cabinet with handle. One XLR & one RCA line input. Two microphone inputs (XLR & 1/4 stereo) with separate microphone volume control. Sensitivity: 97.4 2dB/m/w. Frequency response: 40-17KHz (-10db). Treble, bass and volume output control. Trapezoidal design. Flyable & stand mountable. Blue LED On Indicator on front of unit. Dimensions (LxWxH): 14 x 16.5 x 25.5 / 360 x 420 x 655mm. Weight: 68 lbs. / 25.5 kg. Mounting bracket (PXI BR15) sold separately. XLR Output

F F -1

XDM-221 XDM-241 XDM-343 XDM-352 XDM-3633

FF-COMMANDER

COMMANDER PLUS DX5R
XDM-221 XDM-241 XDM-242 XDM-343 XDM-352 XDM-3633 XDM-250T

XDM-221

Q-2221

FF-QFX

Q-FX19

FF-4/S

Q-2422/S Q-3433/S

FF-5/S

O F -1

Q-D5 Q-D5/B Q-D5 MKII

F F - DX

GNL-14

F F - Q S II

Q-SPAND MKII

F F -7

Q-2411

FF-PLUS/S
Q-2422/S Q-3433/S Q-D1 Q-MX1 Q-MX2BPM Q-SPAND XDM-200 XDM-250T

FF-PLUS

Q-2221/SX Q-2422/SX Q-2422 MKII Q-2422 MKII LIMITED Q-3433/SX Q-3433 MKII Q-221 Q-D3 XDM-250
M A I N F E AT U R E S. GNL-14, Gooseneck Light allows you to perform in dimly lit areas. 14-inch flexible gooseneck fits the American Audio mixers with BNC connection. Comes with one lamp. Replacement lamp:Model:ZB-GNL. Connection:12V DCBNC

USB LIGHT

M A I N F E AT U R E S. Light for mixers and control consoles

FEATHER FADERS

specifications subject to change without notice on all products -

www.AmericanDJ.com

www.AmericanAudio.us

EXTEND YOUR WORLD.

www.AccuCable.com

www.ArribaCase.com

Join Us On You Tube: www.youtube.com/adjlighting Join Us On My Space: www.myspace.com/adj_lighting www.myspace.com/american_audio Join us on Facebook: Keyword American DJ

www.ElationLighting.com

www.GlobalTruss.com

www.Lamp-Lite.com

distributed by:
American DJ Los Angeles CA 90040 USA www.americandj.com
Kerkrade Netherlands www.americandj.eu