AirPort Extreme Setup Guide

Contents

3 Chapter 1: Getting Started 10 Chapter 2: AirPort Extreme Networks 11 Using AirPort Extreme with Your Broadband Internet Service 13 Using AirPort Extreme to Share a USB Printer 15 Using AirPort Extreme to Share a USB Hard Disk 17 Using AirPort Extreme with Your AirPort Network 19 Chapter 3: Setting Up AirPort Extreme 24 Chapter 4: Tips and Troubleshooting 29 Chapter 5: Learning More, Service, and Support 31 Appendix: AirPort Extreme Specifications

Getting Started

Congratulations on purchasing AirPort Extreme. Read this guide to get started using it.
AirPort Extreme is based on an Institute of Electrical and Electronics Engineers (IEEE) draft 802.11n specification and provides better performance and greater range than previous IEEE 802.11 standards. AirPort Extreme is compatible with computers using 802.11b, and 802.11g, as well as computers using the 802.11a wireless standards. With AirPort Extreme, you can: Create a wireless network in your home, and then connect to the Internet and share the connection with multiple computers simultaneously. An entire family or office can be connected to the Internet at the same time. Connect AirPort Extreme to your Ethernet network. Wireless-equipped Macintosh computers or Windows XP computers can then have access to an entire network without being connected by a cable. Connect a USB printer to your AirPort Extreme. All of the compatible computers on the AirPort network, both wireless and wired, can print to it.
Connect a USB hard disk to your AirPort Extreme. All of the compatible computers on the AirPort network, both wireless and wired, can access the information on the hard disk. Connect a USB hub to your AirPort Extreme, and then connect multiple USB devices, such as printers or hard disks, and all of the computers on the network have access to those devices.
Chapter 1 Getting Started

About AirPort Extreme

AirPort Extreme has five ports, located on the back: One 10/100 Ethernet Wide Area Network (WAN) port (<) for connecting a DSL or cable modem, or for connecting to an existing Ethernet network Three 10/100 Ethernet Local Area Network (LAN) ports (G) for connecting Ethernet devices, such as printers or computers, or for connecting to an existing Ethernet network One USB port (d) for connecting a compatible USB printer, hard disk, or hub
Status light Internet WAN port Ethernet ports Reset button

Power port AC adapter

USB port

Security slot

Next to the ports is a reset button, which is used for troubleshooting your AirPort Extreme. The status light on the front of AirPort Extreme shows the current status.
Chapter 1 Getting Started 5
About the AirPort Software
AirPort Extreme works with the AirPort software included on the AirPort Extreme CD.
AirPort Utility AirPort Utility helps you set up your AirPort Extreme to create a wireless network, connect to the Internet, and share a USB printer or hard disk. You can also connect your AirPort Extreme to your existing AirPort Extreme or AirPort Extreme wireless network to extend the range of your network using WDS. Use AirPort Utility to quickly and easily set up your AirPort Extreme and your wireless network. AirPort Utility is also an advanced tool for setting up and managing AirPort Extreme and AirPort Express Base Stations. Use AirPort Utility to adjust network, routing, and security settings and other advanced options.
AirPort status menu in the menu bar Use the AirPort status menu to switch quickly between AirPort networks, monitor the signal quality of the current network, create a computer-to-computer network, and turn AirPort on and off. The status menu is available on computers using Mac OS X.

What You Need to Get Started
To set up AirPort Extreme using a Macintosh, you must have the following: A Macintosh computer with an AirPort or AirPort Extreme Card installed to set it up wirelessly A Macintosh computer connected to AirPort Extreme with an Ethernet cable to set it up using Ethernet Mac OS X v10.4 or later AirPort Utility 5.0 or later
To set up AirPort Extreme using a Windows PC, you must have the following: A Windows PC with 300 MHz or higher processor speed Windows XP Home or Professional (with Service Pack 2 installed) AirPort Utility v5 or later You can use AirPort Extreme with a wireless-enabled computer that is compliant with the IEEE 802.11a, 802.11b, 802.11g standards, or with an IEEE 802.11n draft specification. To set up AirPort Extreme, your computer must meet the requirements listed above. Install the AirPort software that came on the CD and follow the instructions on the following pages to set up your AirPort Extreme and your AirPort wireless network.
Plugging In AirPort Extreme
Before you plug in your AirPort Extreme, first connect the appropriate cables to the ports you want to use, including: The Ethernet cable connected to your DSL or cable modem (if you will connect to the Internet) to the Ethernet (WAN) port (<) USB cable connected to the USB port (d) and to a compatible USB printer (if you will print to a USB printer), a USB hard disk, or USB hub Any Ethernet devices to the Ethernet LAN ports (G)
Once you have connected the cables for all the devices you plan to use, connect the AC plug adapter, and plug AirPort Extreme into the wall. There is no on switch.

Power port

Ethernet activity light

AC adapter

Important: Use only the AC adapter that came with your AirPort Extreme. When you plug AirPort Extreme into the wall, the status light flashes green for one second, and then glows amber while it starts up. Once it has started up completely, the status light flashes amber. The status light glows solid green once it is set up and connected to the Internet or a network. When you connect Ethernet cables to the Ethernet LAN ports (G), the lights above the ports glow solid.
AirPort Extreme Status Light The following table explains AirPort Extreme light sequences and what they indicate.
Light Off Flashing green Solid green Status/description AirPort Extreme is unplugged. AirPort Extreme is starting up. The light flashes for one second. AirPort Extreme is on and working properly. If you choose Flash On Activity from the Status Light pop-up menu (on the Base Station pane of AirPort settings in AirPort Utility), the status light may flash green to indicate normal activity. AirPort Extreme cannot establish a connection to the network or the Internet. See Your AirPort Extreme Status Light Flashes Amber on page 26. AirPort Extreme is completing its startup sequence. There may be a problem starting up. AirPort Extreme will restart and try again.

Flashing amber

Solid amber Flashing amber and green
Whats Next After you plug in AirPort Extreme, use AirPort Utility to set it up to work with your Internet connection, USB printer or hard disk, or an existing network. The AirPort Utility is located in the Utilities folder in the Applications folder on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows XP. See AirPort Extreme Networks on page 10 for examples of all the ways you can use AirPort Extreme, and information about how to set it up.

AirPort Extreme Networks

In this chapter youll find explanations of the different ways you can use AirPort Extreme.
This chapter gives examples of the different kinds of networks you can set up using AirPort Extreme. It provides diagrams and explanations of what you need to do to get your AirPort Extreme network up and running quickly. See Chapter 3, Setting Up AirPort Extreme, on page 19 to find out more about using AirPort Utility to help set up your network.
Using AirPort Extreme with Your Broadband Internet Service
When you set up AirPort Extreme to provide network and Internet access, Macintosh computers with AirPort and AirPort Extreme Cards, and 802.11a, 802.11b, 802.11g, and IEEE 802.11n draft specification wireless-equipped computers can access the wireless AirPort network to share files, play games, and use Internet applications like web browsers and email applications. It looks like this:

DSL or cable modem

< Internet WAN port

to Internet

Chapter 2 AirPort Extreme Networks
To set it up: 1 Connect your DSL or cable modem to your AirPort Extreme Ethernet WAN port (<). 2 Open AirPort Utility (located in the Utilities folder in the Applications folder on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows), select your base station, and then click Continue. 3 Follow the onscreen instructions to create a new network. (See Setting Up AirPort Extreme on page 19.) Computers using AirPort and computers using other wireless cards or adapters connect to the Internet through AirPort Extreme. Computers connected to AirPort Extreme Ethernet ports can also access the network and connect to the Internet. Wireless computers and computers connected to the Ethernet ports can also communicate with one another through AirPort Extreme.
Using AirPort Extreme to Share a USB Printer
When you connect a USB printer to your AirPort Extreme, all computers on the network (wired and wireless) can print to it. It looks like this:

Shared printer

d USB port
To set it up: 1 Connect the printer to the AirPort Extreme USB port (d) using a USB cable. 2 Open AirPort Utility (located in the Utilities folder in the Applications folder on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows), select your base station, and then click Continue. 3 Follow the onscreen instructions to create a new network. To print from a computer using Mac OS X v10.2.7 or later: 1 Open Printer Setup Utility (located in the Utilities folder in the Applications folder). 2 Select the printer from the list. If the printer is not in the list, click Add and choose Bonjour from the pop-up menu, and then select the printer from the list. To print from a computer using or Windows XP: 1 Install Bonjour for Windows from the CD that came with your AirPort Extreme. 2 Follow the onscreen instructions to connect your printer.

Using AirPort Extreme to Share a USB Hard Disk
When you connect a USB hard disk to your AirPort Extreme, all computers on the network (wired and wireless) can access the hard disk to access, share, and store files. It looks like this:

Shared hard disk drive

To set it up: 1 Connect the hard disk to the AirPort Extreme USB port (d) using a USB cable. 2 Open AirPort Utility (located in the Utilities folder in the Applications folder on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows), select your base station, and then click Continue. 3 Follow the onscreen instructions to create a new network. Computers can access the hard disk to share or store files using Mac OS X v10.4 or later, or Windows XP (with Service Pack 2).
Using AirPort Extreme with Your AirPort Network
The illustration below shows a wireless network utilizing all the capabilities of AirPort Extreme.

Family Room Living Room

to Ethernet port to Internet

to USB port

To set it up: 1 Connect all the devices you plan to use in your network. 2 Open AirPort Utility (located in the Utilities folder in the Applications folder on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows), select your base station, and then click Continue. 3 Follow the onscreen instructions to set up your network. (See Setting Up AirPort Extreme on page 19.)
Setting Up AirPort Extreme
This chapter provides information and instructions for using AirPort Utility to set up your AirPort Extreme.
Use the diagrams in the previous chapter to help you decide where you want to use your AirPort Extreme, and what features you want to set up on your AirPort network. Then use the instructions in this chapter to easily configure AirPort Extreme and set up your AirPort network. This chapter provides an overview for using the setup assistant in AirPort Utility to set up your network and other features of your AirPort Extreme. For more detailed wireless networking information, and for information about the advanced features of AirPort Utility, refer to the Designing AirPort Extreme 802.11n Networks document, located at www.apple.com/support/airport. You can do most of your network setup and configuration tasks using the setup assistant in AirPort Utility. To set advanced options, choose Manual Setup from the Base Station menu of AirPort Utility. See Setting Advanced Options on page 23.

Using the AirPort Utility
To set up and configure your AirPort Extreme to use AirPort for wireless networking and Internet access, use the setup assistant in AirPort Utility. AirPort Utility is installed on your computer when you install the software on the AirPort Extreme CD. On a Macintosh computer using Mac OS X v10.4 or later: 1 Open AirPort Utility, located in the Utilities folder in your Applications folder. 2 Select your base station and click Continue. 3 Follow the onscreen instructions to set up your AirPort Extreme and your wireless network. On a computer using Windows XP (with Service Pack 2): 1 Open AirPort Utility, located in Start > All Programs > AirPort. 2 Select your base station and click Continue. 3 Follow the onscreen instructions to set up your AirPort Extreme and your wireless network. The setup assistant in AirPort Utility asks you a series of questions about the type of network you want to use and the services you want to set up. The setup assistant helps you enter the appropriate settings for the network you are setting up. If you are using AirPort Extreme to connect to the Internet, you need a broadband (DSL or cable modem) account with an Internet service provider, or a connection to the Internet using an existing Ethernet network. If you received specific information from your ISP (such as a static IP address or a DHCP client ID), you may need to enter it in AirPort Utility. Have this information available before you set up your AirPort Extreme.
Chapter 3 Setting Up AirPort Extreme
Creating a New Wireless Network
You can use the setup assistant in AirPort Utility to create a new wireless network. The setup assistant guides you through the steps necessary to name your network, protect your network with a password, and set other options. If you plan to share a USB printer or USB hard disk on your network: 1 Connect the printer or hard disk to the AirPort Extreme USB port (d). 2 Open AirPort Utility, located in Utilities folder in the Applications folder on a Macintosh, or in Start > All Programs > AirPort on a computer using Windows XP. 3 Follow the onscreen instructions to create a new network.
Configuring and Sharing Internet Access
If you plan to share your Internet connection with wireless-enabled computers on your network or computers connected to the Ethernet ports, you need to set up your AirPort Extreme as an AirPort Base Station. Once it is set up, computers access the Internet via the AirPort network. The base station connects to the Internet and transmits information to the computers over the AirPort network. Before you use the AirPort Utility to set up your base station, connect your DSL or cable modem to the AirPort Extreme Ethernet WAN port (<). If you are using an existing Ethernet network with Internet access to connect to the Internet, you can connect the AirPort Extreme to the Ethernet network instead.

Use the setup assistant in AirPort Utility to enter your ISP settings and configure how AirPort Extreme shares the settings with other computers. 1 Choose the wireless network you want to change. On a Macintosh, use the AirPort status menu in the menu bar. On a computer using Windows XP, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. The default network name for an Apple base station is AirPort Network XXXXXX, where XXXXXX is replaced with the last six digits of the AirPort ID, also know as the Media Access Control or MAC address. The AirPort ID is printed on the bottom of an AirPort Extreme and on the electrical-plug side of the AirPort Express. 2 Open AirPort Utility, located in Utilities folder in the Applications folder on a computer using Mac OS X, or in Start > All Programs > AirPort on a computer using Windows XP. 3 Select your base station and click Continue. 4 Follow the onscreen instructions to configure and share Internet access on your AirPort Extreme. Using AirPort Utility is a quick and easy way to set up your base station and network. If you want to set additional options for your network, such as restricting access to your network, or setting advanced DHCP options, you can choose Manual Setup from the Base Station menu of AirPort Utility.

Setting Advanced Options

To set advanced options, you can use AirPort Utility to set up your AirPort Extreme manually. You can configure advanced base station settings, such as advanced security options, closed networks, DHCP lease time, access control, power controls, setting up user accounts, and more. To set advanced options: 1 Choose the wireless network you want to change. On a Macintosh, use the AirPort status menu in the menu bar. On a computer using Windows XP, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. The default network name for an Apple base station is AirPort Network XXXXXX, where XXXXXX is replaced with the last six digits of the AirPort ID, also know as the Media Access Control or MAC address. The AirPort ID is printed on the bottom of an AirPort Extreme and on the electrical-plug side of the AirPort Express. 2 Open AirPort Utility, located in the Utilities folder in the Applications folder on a Macintosh, and in Start > All Programs > AirPort on a computer using Windows XP. 3 If there is more than one base station in the list, select the base station you want to configure. If you dont see the base station you want to configure, click Rescan to scan for available base stations, then select the base station you want. 4 Choose Manual Setup from the Base Station menu. If you are prompted for a password, enter it. For more information and detailed instructions for using the manual setup features AirPort Utility, see the Designing AirPort Extreme 802.11n Networks document, located at www.apple.com/support/airport.

Tips and Troubleshooting

You can quickly solve most problems with AirPort Extreme by following the advice in this chapter.
You Forgot Your Network or Base Station Password You can clear the AirPort network or base station password by resetting AirPort Extreme. To reset the base station password: 1 Use the end of a straightened paper clip to press and hold the reset button for one (1) second. Important: If you hold the reset button for more than one (1) second, you may lose your network settings. 2 Select your AirPort network. On a Macintosh, use the AirPort status menu in the menu bar to select the network created by AirPort Extreme (the network name does not change). On a computer using Windows XP, hold the pointer over the wireless connection icon until you see your AirPort Network Name (SSID), and choose it from the list if there are multiple networks available. 3 Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh, and in Start > All Programs > AirPort on a computer using Windows XP).
4 Select your base station and then choose Manual Setup from the Base Station menu. 5 Click AirPort in the toolbar, and then click Base Station. 6 Enter a new password for the base station. 7 Click Wireless and choose an encryption method from the Wireless Security pop-up menu to turn on encryption and activate password protection for your AirPort network. If you turn on encryption, enter a new password for your AirPort network. 8 Click Update to restart the base station and load the new settings. Your AirPort Extreme Isnt Responding Try unplugging it and plugging it back in. If your AirPort Extreme stops responding completely, you may need to reset it to the factory default settings. Important: This erases all of your base station settings and resets them to the settings that came with the AirPort Extreme. To return AirPort Extreme to the factory settings: m Use the end of a straightened paper clip to press and hold the reset button until the status light flashes quickly (about 5 seconds). AirPort Extreme resets with the following settings: AirPort Extreme receives its IP address using DHCP. The network name reverts to Apple Network XXXXXX (where XXXXXX is replaced with the last six digits of the AirPort ID). The base station password returns to public.
Chapter 4 Tips and Troubleshooting
If your base station is still not responding, try the following: 1 Unplug AirPort Extreme. 2 Use the end of a straightened paper clip to press and hold the reset button while you plug in AirPort Extreme. Your AirPort Extreme Status Light Flashes Amber The Ethernet cable may not be connected properly, AirPort Extreme may be out of range of an AirPort network, or there may be a problem with your Internet service provider. If you are connected to the Internet with a DSL or cable modem, the modem may have lost its connection to the network or the Internet. Even if the modem seems to be working properly, try disconnecting the modem from its power supply, waiting a few seconds, and then reconnecting it. Make sure AirPort Extreme is connected directly to the modem via Ethernet before reconnecting power to the modem. For more information about the reason the light flashes, open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. The information about the flashing light is displayed on the Summary pane. Your Printer Isnt Responding If you connected a printer to the USB port on AirPort Extreme and the computers on the AirPort network cant print, try doing the following: 1 Make sure the printer is plugged in and turned on. 2 Make sure the cables are securely connected to the printer and to the AirPort Extreme USB port.

3 Make sure the printer is selected in the Printer List window on client computers. On a Macintosh using Mac OS X v10.2.7 or later: Open Printer Setup Utility, located in the Utilities folder in the Applications folder. If the printer is not in the list, click Add. Choose Bonjour from the pop-up menu. Select the printer and click Add. To select your printer on a computer using Windows XP: Open Printers and Faxes from the Start menu. Select the printer. If the printer is not in the list, click Add Printer and then follow the onscreen instructions. 4 Turn the printer off, wait a few seconds, then turn it back on. I Want to Update My AirPort Software Apple periodically updates AirPort software to improve performance or add features. It is recommended that you update your AirPort Extreme to use the latest software. To download the latest version of AirPort software, go to www.support.apple.com/airport.
AirPort Extreme Placement Considerations
The following recommendations can help your AirPort Extreme achieve maximum wireless range and optimal network coverage. Place your AirPort Extreme in an open area where there are few obstructions, such as large pieces of furniture or walls. Try to place it away from metallic surfaces. If you place your AirPort Extreme behind furniture, keep at least an inch of space between the AirPort Extreme and the edge of the furniture.
Chapter 4 Tips and Troubleshooting 27
Avoid placing your AirPort Extreme in areas surrounded by metal surfaces on three or more sides. If you place your AirPort Extreme in an entertainment center with your stereo equipment, avoid completely surrounding AirPort Extreme with audio, video, or power cables. Place your AirPort Extreme so that the cables are to one side. Maintain as much space as possible between AirPort Extreme and the cables. Try to place your AirPort Extreme at least 25 feet from a microwave oven, 2.4 or 5 gigahertz (GHz) cordless phones, or other sources of interference.
Items That Can Cause Interference With AirPort
The farther away the interference source, the less likely it is to cause a problem. The following items can cause interference with AirPort communication: Microwave ovens Direct Satellite Service (DSS) radio frequency leakage The original coaxial cable that came with certain types of satellite dishes. Contact the device manufacturer and obtain newer cables. Certain electrical devices such as power lines, electrical railroad tracks, and power stations Cordless telephones that operate in the 2.4 or 5 GHz range. If you have problems with your phone or AirPort communication, change the channel your base station or AirPort Extreme uses, or change the channel your phone uses. Nearby base stations using adjacent channels. For example, if base station A is set to channel 1, base station B should be set to channel 6 or 11.

Learning More, Service, and Support
You can find more information about using AirPort Extreme on the web and in onscreen help.

Online Resources

For the latest information on AirPort Extreme, go to www.apple.com/airport. To register AirPort Extreme (if you didnt do it when you installed the software on the AirPort Extreme CD), go to www.apple.com/register. For AirPort service and support information, a variety of forums with product-specific information and feedback, and the latest Apple software downloads, go to www.apple.com/support/airport. For support outside of the United States, go to www.apple.com/support, and then choose your country from the pop-up menu.

Onscreen Help

m To learn more about using AirPort, open AirPort Utility and choose Help > AirPort Utility Help.
Obtaining Warranty Service
If the product appears to be damaged or does not function properly, please follow the advice in this booklet, the onscreen help, and the online resources. If the base station still does not function, go to www.apple.com/support for instructions about how to obtain warranty service.
Finding the Serial Number of Your AirPort Extreme
The serial number is printed on the bottom of your AirPort Extreme.
Chapter 5 Learning More, Service, and Support
AirPort Specifications Frequency Band: 2.4 and 5 GHz Radio Output Power: 20 dBm (nominal) Standards: 802.11 DSSS 1 and 2 Mbps standard, 802.11a, 802.11b, 802.11g specifications, and a draft 802.11n specification Interfaces 1 RJ-45 10/100Base-T Ethernet WAN (<) 3 RJ-45 10/100Base-T Ethernet LAN (G) Universal Serial Bus (USB d) AirPort Extreme wireless Environmental Specifications Operating Temperature: 32 F to 95 F (0 C to 35 C) Storage Temperature: 13 F to 140 F (25 C to 60 C) Relative Humidity (Operational): 20% to 80% relative humidity Relative Humidity (Storage): 10% to 90% relative humidity, noncondensing

Appendix

AirPort Extreme Specifications
Size and Weight Length: 6.50 inches (165.0mm) Width: 6.50 inches (165.0mm) Thickness: 1.34 inches (34.0mm) Weight: 1.66 pounds (753 grams) Hardware Media Access Control (MAC) Addresses The AirPort Extreme has two hardware addresses printed on the bottom of the case: AirPort ID: The address used to identify AirPort Extreme on a wireless network. Ethernet ID: You may need to provide this address to your ISP to connect AirPort Extreme to the Internet.

Using AirPort Extreme

The only way to shut off power completely to your AirPort Extreme is to disconnect it from the power source. When connecting or disconnecting your AirPort Extreme, always hold the plug by its sides. Keep fingers away from the metal part of the plug. Your AirPort Extreme should not be opened for any reason, even when the AirPort Extreme is unplugged. If your AirPort Extreme needs service, see Learning More, Service, and Support on page 29. Never force a connector into the ports. If the connector and port do not join with reasonable ease, they probably dont match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port.
Appendix AirPort Extreme Specifications
About Operating and Storage Temperatures
When you are using your AirPort Extreme, it is normal for the case to get warm. The AirPort Extreme case functions as a cooling surface that transfers heat from inside the unit to the cooler air outside.

Avoid Wet Locations

Warning: To reduce the chance of shock or injury, do not use your AirPort Extreme in or near water or wet locations. Keep AirPort Extreme away from sources of liquids, such as drinks, washbasins, bathtubs, shower stalls, and so on. Protect AirPort Extreme from direct sunlight and rain or other moisture. Take care not to spill any food or liquid on your AirPort Extreme. If you do, unplug AirPort Extreme before cleaning up the spill. Do not use AirPort Extreme outdoors. AirPort Extreme is an indoor product.
Do Not Make Repairs Yourself
Warning: Do not attempt to open your AirPort Extreme or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.

About Handling

Your AirPort Extreme may be damaged by improper storage or handling. Be careful not to drop your AirPort Extreme when transporting the device.
Communications Regulation Information

Wireless Radio Use

This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range to reduce the potential for harmful interference to cochannel Mobile Satellite systems. Cet appareil doit tre utilis lintrieur. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. You can determine whether your computer system is causing interference by turning it off. If the interference stops, it was probably caused by the computer or one of the peripheral devices. If your computer system does cause interference to radio or television reception, try to correct the interference by using one or more of the following measures: Turn the television or radio antenna until the interference stops. Move the computer to one side or the other of the television or radio. Move the computer farther away from the television or radio. Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses.) If necessary, consult an Apple Authorized Service Provider or Apple. See the service and support information that came with your Apple product. Or, consult an experienced radio/television technician for additional suggestions.

Exposure to Radio Frequency Energy
The radiated output power of this device is well below the FCC radio frequency exposure limits. However, this device should be operated with a minimum distance of at least 20 cm between its antennas and a person's body and the antennas used with this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant.
FCC Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.
Radio and Television Interference
This computer equipment generates, uses, and can radiate radio-frequency energy. If it is not installed and used properlythat is, in strict accordance with Apples instructionsit may cause interference with radio and television reception.
Important: Changes or modifications to this product not authorized by Apple Computer, Inc. could void the EMC compliance and negate your authority to operate the product. This product was tested for FCC compliance under conditions that included the use of Apple peripheral devices and Apple shielded cables and connectors between system components. It is important that you use Apple peripheral devices and shielded cables and connectors between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. You can obtain Apple peripheral devices and the proper shielded cables and connectors through an Apple-authorized dealer. For non-Apple peripheral devices, contact the manufacturer or dealer for assistance. Responsible party (contact for FCC matters only): Apple Computer, Inc., Product Compliance, 1 Infinite Loop M/S 26-A, Cupertino, CA 95014-2084, 408-974-2000.

VCCI Class B Statement

EuropeEU Declaration of Conformity
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz). This equipment meets the following conformance standards: EN300 328, EN301 893, EN301 489-17, EN60950. Hereby, Apple Computer, Inc., declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Industry Canada Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
Disposal and Recycling Information
AirPort Extreme has an internal battery. Please dispose of it according to your local environmental laws and guidelines. For information about Apple's recycling program, go to www.apple.com/environment. California: The coin cell battery in your product contains perchlorates. Special handling and disposal may apply. Refer to www.dtsc.ca.gov/hazardouswaste/ perchlorate.
European UnionDisposal Information:
Nederlands: Gebruikte batterijen kunnen worden ingeleverd bij de chemokar of in een speciale batterijcontainer voor klein chemisch afval (kca) worden gedeponeerd.
This symbol means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Deutschland: Dieses Gert enthlt Batterien. Bitte nicht in den Hausmll werfen. Entsorgen Sie dieses Gertes am Ende seines Lebenszyklus entsprechend der mageblichen gesetzlichen Regelungen.

Taiwan:

2007 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, AirPort, AirPort Extreme, Bonjour, iTunes, Mac, Macintosh, and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. AirPort Express is a trademark of Apple Computer, Inc. Other product and company names mentioned herein may be trademarks of their respective companies.
www.apple.com/airport www.apple.com/support/airport
034-3422-A Printed in XXXX

AirPort Express Setup Guide

Contents

12 Chapter 1: Getting Started About AirPort Express About the AirPort Software What You Need to Get Started Plugging In Your AirPort Express AirPort Express Status Lights Whats Next
13 Chapter 2: Using AirPort Express 13 Using AirPort Express with Your Broadband Internet Service 15 Using AirPort Express on an Existing Wireless Network and Stream Music to Powered Speakers or Your Home Stereo 17 Using AirPort Express to Share a USB Printer Chapter 3: Setting Up Your AirPort Express Using AirPort Utility Creating a New Wireless Network Configuring and Sharing Internet Access Connecting to an Existing Wireless Network Allowing Wireless Clients Access to Your Network
27 Setting Advanced Options 29 Chapter 4: Tips and Troubleshooting 35 AirPort Express Placement Considerations 36 Items That Can Cause Interference with AirPort 41 Chapter 5: Learning More, Service, and Support Online Resources Onscreen Help Obtaining Warranty Service Finding the Serial Number of Your AirPort Express Appendix: AirPort Express Specifications AirPort Express Safety Tips Avoid Wet Locations Do Not Make Repairs Yourself
43 Regulatory Compliance Information

Getting Started

Congratulations on purchasing AirPort Express. Read this guide to get started using it.
AirPort Express is based on an Institute of Electrical and Electronics Engineers (IEEE) draft 802.11n specification and provides better performance and greater range than previous IEEE 802.11 standards. AirPort Express is compatible with computers using 802.11b, and 802.11g, as well as computers using the 802.11a and 802.11n wireless standards. You can use AirPort Express to share your broadband Internet access with wireless computers on your network, play iTunes music on your home stereo, and share a USB printer. Your AirPort Express comes with AirTunes, an easy way to play iTunes music through remote speakers.
With AirPort Express, you can: Create a wireless network in your home, and then connect to the Internet and share the connection with up to ten computers, or Wi-Fi devices such as iPhone, iPod touch, and Apple TV. An entire family can be connected to the Internet at the same time. Connect AirPort Express to your home stereo or powered speakers and use AirTunes to play your iTunes music on your home stereo from a Macintosh with an AirPort or AirPort Extreme Card, or a compatible Windows XP or Windows Vista computer. Set up a wireless connection to your Ethernet network. AirPort and AirPort Extremeequipped Macintosh computers, or Windows Vista or Windows XP computers, can then have access to an entire network without being connected with a cable. Connect a USB printer to your AirPort Express. All of the compatible computers on the AirPort network, both wireless and wired, can print to it.
Chapter 1 Getting Started

About AirPort Express

AirPort Express has three ports, located on the bottom side: Ethernet (G) port for connecting a DSL or cable modem, or for connecting to an existing Ethernet network Analog and optical digital audio stereo mini-jack (-) for connecting AirPort Express to a home stereo or powered speakers USB (d) port for connecting a compatible printer to AirPort Express

Status light

AC plug adapter USB port Reset button

Ethernet port

Line Out port (Analog and optical digital audio mini-jack)
Next to the ports is a reset button, which is used for troubleshooting your AirPort Express. The status light on the side of AirPort Express shows the current status.

AirPort Express Status Lights
The following table explains AirPort Express light sequences and what they indicate.
Light Off Flashing green Solid green Status/description AirPort Express is unplugged. AirPort Express is starting up. The light flashes for one second. AirPort Express is on and working properly. If you choose Flash On Activity from the Status Light pop-up menu in the Base Station pane of AirPort Utility, the status light may flash green to indicate normal activity.

Light Flashing amber

Status/description AirPort Express cannot establish a connection to the network or the Internet, or is encountering a problem. Make sure you have installed AirPort Utility and use it to get information about what might cause the status light to flash amber. See If Your AirPort Express Status Light Flashes Amber on page 32. AirPort Express is completing its startup sequence. There may be a problem starting up. AirPort Express will restart and try again. The base station is ready to allow a wireless client access to the network. See Allowing Wireless Clients Access to Your Network on page 26.
Solid amber Flashing amber and green Solid blue

Whats Next

After you plug in AirPort Express, you use AirPort Utility to set it up to work with your Internet connection, stereo, USB printer, or existing network. See Using AirPort Express on page 13 for examples of all the ways you can use AirPort Express, and information about how to set up your wireless network. Then see Setting Up Your AirPort Express on page 21 to find out more about the setup process.

Using AirPort Express

In this chapter youll find explanations of the different ways you can use AirPort Express.
This chapter gives examples of how your setup might look, depending on how you use AirPort Express. It also gives a brief explanation of what you need to do to get your AirPort Express network up and running quickly.
Using AirPort Express with Your Broadband Internet Service
When you set up AirPort Express to provide network and Internet access, Macintosh computers with AirPort and AirPort Extreme Cards, and 802.11a, 802.11b, 802.11g, or 802.11n wireless computers can access the wireless AirPort network to share files, play games, and use Internet applications such as web browsers and email applications.

What It Looks Like

DSL or cable modem

G Ethernet port

to Internet

How to Set It Up 1 Connect your DSL or cable modem to your AirPort Express using the Ethernet (G) port. 2 Use AirPort Utility to create a new network. (See Setting Up Your AirPort Express on page 21 for more information.) Computers using AirPort and computers using other wireless cards or adapters connect to the Internet through AirPort Express. Wireless computers communicate with each other through AirPort Express.
Chapter 2 Using AirPort Express
Using AirPort Express on an Existing Wireless Network and Stream Music to Powered Speakers or Your Home Stereo
You can also connect AirPort Express as a client to an existing wireless network. Connect AirPort Express to your stereo or powered speakers and use AirTunes to play music from iTunes. Connecting AirPort Express to your existing network allows you to place AirPort Express in another room, within range of your network. What It Looks Like
AirPort Extreme Base Station DSL or cable modem
to Internet Line Out port

Powered speakers

to Ethernet port
How to Set It Up 1 Connect your AirPort Express to your home stereo or powered speakers using a digital fiber optic cable, analog mini-stereo-to-dual-RCA cable, or mini-stereo to mini-stereo cable (depending on what type of connectors your stereo uses) connected to the stereo mini-jack (-). Note: You cannot use USB speakers with AirPort Express. Use powered speakers with a stereo mini-jack connector. 2 To join the wireless network, use the AirPort status menu in the menu bar on a Macintosh. On a Windows computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password if necessary. 3 Open iTunes on your computer and choose your stereo or speakers from the speakers pop-up menu in the lower-right corner of the iTunes window. You can stream iTunes music to more than one AirPort Express at a time by choosing Multiple Speakers from the speakers pop-up menu. Wireless computers within range of AirPort Express can wirelessly stream music to it using iTunes 4.6 or later. Only one computer at a time can stream music to AirPort Express. Do not connect AirPort Express to the phono jack on your stereo.

Using AirPort Express to Share a USB Printer
When you connect a USB printer to your AirPort Express, all of the computers on the wireless network can print to it. What It Looks Like

Line Out port

to USB port
How to Set It Up 1 Connect the printer to the AirPort Express USB (d) port using a USB cable. 2 Use AirPort Utility to create a new network or join an existing one. (See Setting Up Your AirPort Express on page 21.) Wireless computers can print to the printer using Mac OS X v10.2.7 or later, or Windows Vista or Windows XP. To use the printer with a computer using Mac OS X v10.3 or v10.4: 1 Open Printer Setup Utility (located in the Utilities folder in the Applications folder). 2 Select the printer from the list. If the printer is not in the list, click Add, choose Bonjour from the pop-up menu, and then select the printer from the list. To use a printer with a computer using Mac OS X v10.5: 1 Choose Apple > System Preferences, and then click Print & Fax. 2 Select the printer in the list. If the name of the printer isnt in the list, click Add (+) at the bottom of the list and then select the printer you want to use. To use the printer with a Windows computer: 1 Install Bonjour for Windows from the CD that came with your AirPort Express. 2 Follow the onscreen instructions to connect your printer.
Optional Audio Cable and Power Cord
You can purchase the optional AirPort Express Stereo Connection Kit to connect your AirPort Express to your home stereo or powered speakers. The kit includes analog ministereo-to-dual-RCA connectors, a Toslink digital fiber optic cable, and a power cord.
Mini-stereo-to-RCA cable Toslink-to-mini digital fiber optic cable

Power cord

Connect the analog cable to your home stereo if it uses standard analog cables. Connect the digital fiber optic cable if your stereo has a digital Toslink port. Connect the power cord if you are setting up your AirPort Express away from a power outlet.
Setting Up Your AirPort Express
This chapter provides information and instructions for using the AirPort software to set up your AirPort Express.
Use the diagrams in the previous chapter to help you decide where you want to use your AirPort Express, and what features you want to set up on your AirPort network. Then use the instructions in this chapter to easily configure your AirPort Express and set up your wireless network. With AirPort Utility you can: Set up a new network that wireless computers can use to communicate with each other. If you set up your AirPort Express as a base station and connect it to the Internet, wireless computers can also share the Internet connection. Connect your AirPort Express to your existing wireless network and use AirTunes to play iTunes music on your home stereo or powered speakers, and connect a USB printer to share. You can use AirTunes to play music from iTunes and share a USB printer in any type of network you set up, whether it is a new network or you are joining an existing network. If you have more than one AirPort Express, you can connect one to the stereo in your living room and connect another to the powered speakers in your den, for example. Using AirTunes, you can stream your iTunes music to either AirPort Express, depending

Allowing Wireless Clients Access to Your Network
If your network is password-protected using WPA Personal or WPA/WPA2 Personal, you can provide wireless clients access to your network without requiring them to enter the network password. When you allow a client access to your network, the clients name and wireless MAC address (or AirPort ID) are stored in the access control list of AirPort Utility until you remove the client from the list. You can also provide 24 hours of access, after which time the client will no longer be able to access your network. When you provide a client access to your wireless network, the client does not need to enter the network password. To allow client access to your network: 1 Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary. 2 Choose Add Wireless Clients from the Base Station menu. 3 Select how you want the client to access the network: Select PIN to enter the eight-digit number provided by the client requesting network access. Select First attempt to allow network access to the first client attempting to join the network. 4 Select Limit clients access to 24 hours if you want to provide only one day of access to your network. If you dont select this option, the client will have access to your network until you remove the clients name from the list.

Setting Advanced Options

To set advanced options, you can use AirPort Utility to set up your AirPort Express manually. You can configure advanced base station settings, such as advanced security options, closed networks, DHCP lease time, access control, power controls, setting up user accounts, and more. To set advanced options or make changes to a network youve already set up: 1 Choose the wireless network you want to change. On a Macintosh, use the AirPort status menu in the menu bar. On a computer using Windows XP, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and then choose it from the list if there are multiple networks available. The default network name for an Apple base station is AirPortNetwork XXXXXX, where XXXXXX is replaced with the last six digits of the AirPort ID, also know as the Media Access Control or MAC address. The AirPort ID is printed on the electrical-plug side of the AirPort Express. 2 Open AirPort Utility, located in the Utilities folder in the Applications folder on a Macintosh, and in Start > All Programs > AirPort on a computer using Windows XP. 3 If there is more than one base station in the list, select the base station you want to change. If you dont see the base station you want to configure, click Rescan to scan for available base stations, and then select the base station you want. 4 Choose Manual Setup from the Base Station menu. If you are prompted for a password, enter it.

Tips and Troubleshooting

You can quickly solve most problems with AirPort Express by following the advice in this chapter.
If the AirPort Express Software Cant Detect the Proper AirPort Hardware
Make sure that the computer you are using has an AirPort Card or an AirPort Extreme Card installed. If you recently installed the card, shut down your computer and make sure the card is properly installed. Make sure that the AirPort antenna is securely connected to the card (you should hear a click when the antenna is connected securely). Make sure that the other end of the card is firmly inserted into the connector in the AirPort Card slot. If you are using a Windows computer, make sure the wireless card or adapter is installed correctly. See the documentation that came with your computer to check the connection.
If You Cant Play Music on Your Stereo from iTunes
Check the following: Make sure your AirPort Express is plugged into a power outlet, is in range of your computer, and that you have connected the appropriate cables. You may need to join the AirPort Express network. Make sure to choose your AirPort Express from the speakers pop-up menu in the lower right corner of the iTunes window. Make sure you are using iTunes 4.6 or later.
If You Cant Hear Music Playing
If music is playing (the progress bar at the top of the iTunes window is moving) but you can't hear anything, check the following: If you are trying to play music through speakers connected to an AirPort Express, and youve selected the Disable iTunes volume control for remote speakers checkbox in the Audio pane of iTunes preferences, make sure your remote speakers are selected in the pop-up menu at the bottom of the iTunes window and the volume control on the remote speakers isnt turned down.
If You Forgot Your Network or AirPort Express Password
You can clear the AirPort network or AirPort Express password by resetting AirPort Express. To reset your password: 1 Use the end of a straightened paper clip to press and hold the reset button for one second. 2 Select your AirPort network.
Chapter 4 Tips and Troubleshooting
On a Macintosh computer: Use the AirPort status menu in the menu bar to select the network created by AirPort Express (the network name does not change). On a computer using Windows Vista or Windows XP: Hold the pointer over the wireless connection icon until you see your AirPort Network Name (SSID), and choose it from the list if there are multiple networks available. 3 Open AirPort Utility, located in the Utilities folder in the Applications folder on a Macintosh, and in Start > All Programs > AirPort on a computer using Windows. 4 Select your AirPort Express and click Configure. 5 In the dialog that appears, make the following changes: Reset the AirPort Express password. Turn on encryption to activate password protection for your AirPort network. If you turn on encryption, enter a new password for your AirPort network. 6 Click OK. AirPort Express restarts to load the new settings.

If Your AirPort Express Isnt Responding
Try unplugging it and plugging it back into a power outlet. If your AirPort Express stops responding completely, you may need to reset it to the factory default settings. This erases all of the settings youve made and resets them to the settings that came with the AirPort Express.
If Your AirPort Express Status Light Flashes Amber
The Ethernet cable may not be connected properly, your AirPort Express may be out of range of an AirPort network, or there may be a problem with your Internet service provider. If you are connected to the Internet with a DSL or cable modem, the modem may have lost its connection to the network or the Internet. Even if the modem seems to be working properly, try disconnecting the modem from its power supply, waiting a few seconds, and then reconnecting it. Make sure your AirPort Express is connected directly to the modem via Ethernet before reconnecting power to the modem. For information about the reason the light flashes amber, open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary, and then click Base Station Status to display information about the flashing light. You can also select the Monitor base station for problems checkbox in AirPort preferences. If the base station has problems, AirPort Utility opens and walks you through solving the problems. Note: If AirPort Express is set up as a wireless client and the network its joining is protected by an access control list (ACL), AirPort Express must be in the ACL to connect to the network. To return AirPort Express to the factory settings: m Use the end of a straightened paper clip to press and hold down the reset button for ten seconds. AirPort Express restarts with the following settings: AirPort Express receives its IP address using DHCP.
The network name reverts to Apple Network XXXXXX (where X is a letter or number). The AirPort Express password returns to public. If you used AirPort Utility to create profiles for your AirPort Express, they are preserved when you reset your AirPort Express. If you need to return your AirPort Express to the factory settings and remove any profiles you have set up: 1 Unplug AirPort Express. 2 Use the end of a straightened paper clip to hold down the reset button while you plug in AirPort Express. Wait until the status light flashes, and then reset the base station.

If Your Printer Isnt Responding
If you connected a printer to the USB port on AirPort Express and the computers on the AirPort network cant print, try doing the following: 1 Make sure the printer is plugged in and turned on. 2 Make sure the cables are securely connected to the printer and to the AirPort Express USB port. 3 Make sure the printer is selected in the Printer List on client computers. To select your printer on a computer using Mac OS X v10.3 or v10.4: Open Printer Setup Utility, located in the Utilities folder in the Applications folder. If the printer is not in the list, click Add. Choose Bonjour from the pop-up menu. Select the printer and click Add.
To select your printer on a computer using Mac OS X v10.5: Choose Apple > System Preferences, and then click Print & Fax. Select the printer in the list. If the name of the printer isnt in the list, click Add (+) at the bottom of the list, and then select the printer you want to use. To select your printer on a computer using Windows: Open Printers and Faxes from the Start menu. Select the printer. If the printer is not in the list, click Add Printer and then follow the onscreen instructions. 4 Turn off the printer, wait a few seconds, and then turn it back on.
If You Want to Update Your AirPort Software
Apple periodically updates AirPort software. To update your base station software: 1 Open AirPort Utility, located in the Utilities folder in the Applications folder. 2 Choose Check for Updates from the AirPort Utility menu. 3 Click Download to download all available firmware updates, or click Show Details to select specific firmware for your base station. 4 After the firmware is downloaded, click Update to install it on your base station. If you are updating more than one base station, click Show Details to select the base stations you want to update.
AirPort Express Placement Considerations
The following recommendations can help your AirPort Express achieve maximum wireless range and optimal network coverage. Place your AirPort Express in an open area where there are few obstructions, such as large pieces of furniture or walls. Try to place it away from metallic surfaces. If you place your AirPort Express behind furniture, keep at least an inch of space between the AirPort Express and the edge of the furniture. Avoid laying your AirPort Express on its side. Avoid placing your AirPort Express in areas surrounded by metal surfaces on three or more sides. If you place your AirPort Express in an entertainment center with your stereo equipment, avoid completely surrounding AirPort Express with audio, video, or power cables. Place your AirPort Express so that the cables are to one side. Maintain as much space as possible between AirPort Express and the cables. If you place your AirPort Express behind your stereo equipment, place it on one side or the other. Avoid centering it behind your stereo. Try to place your AirPort Express at least 25 feet (8 meters) from a microwave oven, 2.4 GHz cordless phone, or other source of interference.

Items That Can Cause Interference with AirPort
The farther away the interference source, the less likely it is to cause a problem. The following items can cause interference with AirPort communication: Microwave ovens Direct Satellite Service (DSS) radio frequency leakage The original coaxial cable that came with certain types of satellite dishes. Contact the device manufacturer and obtain newer cables. Certain electrical devices such as power lines, electrical railroad tracks, and power stations Cordless telephones that operate in the 2.4 GHz range. If you have problems with your phone or AirPort communication, change the channel your base station or AirPort Express uses. Adjacent base stations using nearby channels. For example, if base station A is set to channel 1, base station B should be set to channel 4 or higher.
Learning More, Service, and Support
You can find more information about using AirPort Express on your hard disk, on the web, and in onscreen help. Online Resources
For the latest information about AirPort Express, go to www.apple.com/airportexpress. To register your AirPort Express (if you didnt do it when you installed the software on the AirPort Express CD), go to www.apple.com/register. For AirPort service and support information, forums with product-specific information and feedback, and the latest Apple software downloads, go to www.apple.com/ support/airport. For support outside the United States, go to www.apple.com/support and choose your country from the pop-up menu.

Onscreen Help

m To learn more about using AirPort, open AirPort Utility and choose Help > AirPort Utility Help.
Obtaining Warranty Service
If your AirPort Express appears to be damaged or does not function properly, please follow the advice in this booklet, the onscreen help, and the online resources. If the unit still does not function, go to www.apple.com/support for instructions on how to obtain warranty service.
Finding the Serial Number of Your AirPort Express
The serial number is printed on the back of your AirPort Express.
Chapter 5 Learning More, Service, and Support
AirPort Express Specifications
AirPort Specifications Frequency Band: 2.4 or 5 gigahertz (GHz) Radio Output Power: 20 dBm (nominal) Standards: 802.11 DSSS 1 and 2 Mbps standard, 802.11a, 802.11b, 802.11g specifications, and a draft 802.11n specification Interfaces RJ-45 Ethernet LAN connector for built-in 10/100Base-T (G) Universal Serial Bus (USB) (d) Analog/digital optical 3.5 mm mini-jack AirPort Extreme Environmental Specifications Operating Temperature: 32 F to 95 F (0 C to 35 C) Storage Temperature: 13 F to 140 F (25 C to 60 C) Relative Humidity (Operational): 20% to 80% relative humidity Relative Humidity (Storage): 10% to 90% relative humidity, noncondensing Operating Altitude: 0 to 10,000 feet (0 to 3048 m) Maximum Storage Altitude: 15,000 feet (4572 m)

Do Not Make Repairs Yourself
WARNING: Do not attempt to open your AirPort Express or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.
Regulatory Compliance Information

Wireless Radio Use

This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range to reduce the potential for harmful interference to cochannel Mobile Satellite systems. Cet appareil doit tre utilis lintrieur. protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. You can determine whether your computer system is causing interference by turning it off. If the interference stops, it was probably caused by the computer or one of the peripheral devices. If your computer system does cause interference to radio or television reception, try to correct the interference by using one or more of the following measures: Turn the television or radio antenna until the interference stops. Move the computer to one side or the other of the television or radio. Move the computer farther away from the television or radio. Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses.) If necessary, consult an Apple Authorized Service Provider or Apple. See the service and support information that came with your Apple product. Or, consult an experienced radio/television technician for additional suggestions. Important: Changes or modifications to this product not authorized by Apple Inc. could void the EMC compliance and negate your authority to operate the product.
Exposure to Radio Frequency Energy
The radiated output power of this device is well below the FCC and EU radio frequency exposure limits. However, this device should be operated with a minimum distance of at least 20 cm between its antennas and a persons body. The antennas used with this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant.
FCC Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.

Radio and Television Interference
This computer equipment generates, uses, and can radiate radio-frequency energy. If it is not installed and used properlythat is, in strict accordance with Apples instructionsit may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable
This product was tested for FCC compliance under conditions that included the use of Apple peripheral devices and Apple shielded cables and connectors between system components. It is important that you use Apple peripheral devices and shielded cables and connectors between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. You can obtain Apple peripheral devices and the proper shielded cables and connectors through an Apple-authorized dealer. For non-Apple peripheral devices, contact the manufacturer or dealer for assistance. Responsible party (contact for FCC matters only): Apple Inc., Corporate Compliance, 1 Infinite Loop M/S 26-A, Cupertino, CA 95014-2084.
European Union Disposal Information
This symbol means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
Disposal and Recycling Information
This product has an internal battery. Please dispose of it according to your local environmental laws and guidelines. For information about Apple's recycling program, go to www.apple.com/environment. California: The coin cell battery in your product contains perchlorates. Special handling and disposal may apply. Refer to www.dtsc.ca.gov/hazardouswaste/ perchlorate. Deutschland: Dieses Gert enthlt Batterien. Bitte nicht in den Hausmll werfen. Entsorgen Sie dieses Gertes am Ende seines Lebenszyklus entsprechend der mageblichen gesetzlichen Regelungen. Nederlands: Gebruikte batterijen kunnen worden ingeleverd bij de chemokar of in een speciale batterijcontainer voor klein chemisch afval (kca) worden gedeponeerd.
Industry Canada Statement
This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numrique de la Class B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada.

VCCI Class B Statement

Europe EU Declaration of Conformity
For more information, see www.apple.com/euro/ compliance.

Taiwan:

Taiwan Warning Statements
Apple and the Environment
Apple Inc. recognizes its responsibility to minimize the environmental impacts of its operations and products. More information is available on the web at: www.apple.com/environment.

Korea Warning Statements

2008 Apple Inc. All rights reserved. Apple, the Apple logo, AirPort, AirPort Express, AirPort Extreme, Apple TV, Bonjour, iTunes, Mac, Macintosh, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. AirTunes and iPhone are trademarks of Apple Inc. Other product and company names mentioned herein may be trademarks of their respective companies.
www.apple.com/airport www.apple.com/support/airport
034-4657-A Printed in XXXX