Quick Start Guide

Check out behringer.com for expanded Owner Manuals
EUROLIVE B208D/B208D-WH/B210D/B210D-WH/ B212D/B212D-WH/B215D/B215D-WH
Active 200/550-Watt 2-Way PA Speaker System with 8", 10", 12" and 15" Woofer and 1.35" Compression Driver

behringer.com

A50-00000-17266
EUROLIVE B208D/B208D-WH/B210D/B210D-WH/B212D/B212D-WH/B215D/B215D-WH
Important Safety Instructions
Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with " TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel. Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Limited Warranty

1 Warranty
[1] This limited warranty is valid only if you purchased the product from a BEHRINGER authorized dealer in the country of purchase. A list of authorized dealers can be found on BEHRINGERs website behringer.com under Where to Buy, or you can contact the BEHRINGER office closest to you. [2] MUSIC Group* warrants the mechanical and electronic components of this product to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of purchase (see the Limited Warranty terms in 4 below), unless a longer minimum warranty period is mandated by applicable local laws. If the product shows any defects within the specified warranty period and that defect is not excluded under 4, MUSIC Group shall, at its discretion, either replace or repair the product using suitable new or reconditioned product or parts. In case MUSIC Group decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e., one (1) year (or otherwise applicable minimum warranty period) from the date of purchase of the original product. [3] Upon validation of the warranty claim, the repaired or replacement product will be returned to the user freight prepaid by MUSIC Group. [4] Warranty claims other than those indicated above are expressly excluded. PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE.

[2] Subsequently, Limited Warranty the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group. [3] Shipments without freight prepaid will not be accepted.
2 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase at behringer.com under Support and kindly read the terms and conditions of our limited warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation! 3 Return materials authorization
[1] To obtain warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may contact the BEHRINGER distributor for your country listed under Support at behringer.com. If your country is not listed, please check if your problem can be dealt with by our Online Support which may also be found under Support at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product. After verifying the products warranty eligibility with the original sales receipt, MUSIC Group will then issue a Return Materials Authorization (RMA) number.

Legal Disclaimer

Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. BEHRINGER products are sold through authorized dealers only. Distributors and dealers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of Red Chip Company Ltd. ALL RIGHTS RESERVED. 2010 Red Chip Company Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands
4 Warranty Exclusions [1] This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries. Where applicable, MUSIC Group warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase. [2] This limited warranty does not cover the product if it has been electronically or mechanically modified in any way. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. This limited warranty does not cover any such modification/adaptation, regardless of whether it was carried out properly or not. Under the terms of this limited warranty, MUSIC Group shall not be held responsible for any cost resulting from such a modification/adaptation. [3] This limited warranty covers only the product hardware. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product. Any such software is provided AS IS unless expressly provided for in any enclosed software limited warranty. [4] This limited warranty is invalid if the factoryapplied serial number has been altered or removed from the product. [5] Free inspections and maintenance/repair work are expressly excluded from this limited warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, guitar strings, illuminants and similar parts. Legal Disclaimer [6] Damage/defects caused by the following conditions are not covered by this limited warranty: improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; damage/defects caused by acts of God/Nature (accident, fire, flood, etc) or any other condition that is beyond the control of MUSIC Group.

[7] Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the limited warranty. [8] If an inspection of the product by MUSIC Group shows that the defect in question is not covered by the limited warranty, the inspection costs are payable by the customer. [9] Products which do not meet the terms of this limited warranty will be repaired exclusively at the buyers expense. MUSIC Group or its authorized service center will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, MUSIC Group will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order. [10] Authorized BEHRINGER dealers do not sell new products directly in online auctions. Purchases made through an online auction are on a buyer beware basis. Online auction confirmations or sales receipts are not accepted for warranty verification and MUSIC Group will not repair or replace any product purchased through an online auction.

9 Amendment

Warranty service conditions are subject to change without notice. For the latest warranty terms and conditions and additional information regarding MUSIC Groups limited warranty, please see complete details online at behringer.com.
* MUSIC Group Macao Commercial Oshore Limited of Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau, including all MUSIC Group companies
5 Warranty transferability This limited warranty is extended exclusively to the original buyer (customer of authorized retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of MUSIC Group. 6 Claim for damage
Subject only to the operation of mandatory applicable local laws, MUSIC Group shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind. In no event shall the liability of MUSIC Group under this limited warranty exceed the invoiced value of the product.
7 Limitation of liability This limited warranty is the complete and exclusive warranty between you and MUSIC Group. It supersedes all other written or oral communications related to this product. MUSIC Group provides no other warranties for this product. 8 Other warranty rights and national law [1] This limited warranty does not exclude or limit the buyers statutory rights as a consumer in any way. [2] The limited warranty regulations mentioned herein are applicable unless they constitute an infringement of applicable mandatory local laws. [3] This warranty does not detract from the sellers obligations in regard to any lack of conformity of the product and any hidden defect.

Caractristiques techniques
Puissance de sortie Section du Woofer Puissance efficace Puissance crte Section du Tweeter Puissance efficace Puissance efficace Diamtre des haut-parleurs Diamtre Entres audio XLR (symtrie lectronique) Sensibilit Impdance dentre Jack stro 6,35 mm (symtrie lectronique) Sensibilit Impdance dentre Rglage de niveau (Level) Plage de niveau dentre Niveau max. dentre Reprise signal dentre Connecteur Donnes lectriques Rponse en frquence Frquence de coupure Pression sonore Limiteur galiseur dynamique galiseur HIGH LOW Alimentation secteur Tension (fusibles) USA/Canada UK/Australia Europe Japan Consommation lectrique Embase secteur Dimensions et Poids Dimensions (H x L x P) Poids approx. 14.65 x 9.80 x 8.00" approx. 372 x 249 x 205 mm 14.68 lbs / 6,66 kg approx. 18.27 x 11.50 x 9.61" approx. 464 x 292 x 244 mm 18.77 lbs / 8,52 kg approx. 21.7 x 13.6 x 10.6" approx. 550 x 345 x 270 mm 31.9 lbs / 14,5 kg approx. 27.2 x 17.3 x 13.2" approx. 690 x 440 x 335 mm 45.2 lbs / 20,54 kg 120 V, 60 Hz (T 4.0 A H 250 V) 240 V~, 50 Hz (T 2.0 A H 250 V) 230 V~, 50 Hz (T 2.0 A H 250 V) 100 V~, 50-60 Hz (T 4.0 A H 250 V) max. 300 Watts 120 V, 60 Hz (T 4.0 A H 250 V) 120 V, 60 Hz (T 6.3 A H 250 V) 240 V~, 50 Hz (T 2.0 A H 250 V) 240 V~, 50 Hz (T 3.15 A H 250 V) 230 V~, 50 Hz (T 2.0 A H 250 V) 230 V~, 50 Hz (T 3.15 A H 250 V) 100 V~, 50-60 Hz 100 V~, 50-60 Hz (T 4.0 A H 250 V) (T 6.3 A H 250 V) max. 300 Watts max. 600 Watts Embase secteur IEC 120 V, 60 Hz (T 6.3 A H 250 V) 240 V~, 50 Hz (T 3.15 A H 250 V) 230 V~, 50 Hz (T 3.15 A H 250 V) 100 V~, 50-60 Hz (T 6.3 A H 250 V) max. 600 Watts 12 kHz / 15 dB 80 Hz / 15 dB 24 kHz max. 113 dB SPL @ 1 m 65 Hz / 20 kHz 24 kHz 2.4 kHz max. 113 dB SPL @ 1 m max. 125 dB SPL @ 1 m Optique Gr par processeur 1.9 kHz max. 126 dB SPL @ 1 m -40 dBu +4 dBu 20 k -40 dBu +4 dBu 20 k + 30 dB +22 dBu Connecteur XLR 8" / 20 cm 10" / 25 cm 12" 15" 135 W @ W @ W @ W @ W @ W @ W @ W @ W @ W @ W @ W @ W @ W @ W @ W @ 8
Other important information

Important information

1. Register online. Please register your new BEHRINGER equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, ifapplicable. 2. Malfunction. Should your BEHRINGER dealer not be located in your vicinity, you may contact the BEHRINGER distributor for your country listed under Support at behringer.com. Should your country not be listed, please check if your problem can be dealt with by our OnlineSupport which may also be found under Support at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning theproduct. 3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

Informations importantes

1. Enregistrez-vous en ligne. Prenez le temps denregistrer votre produit BEHRINGER aussi vite que possible sur le site Internet behringer.com. Le fait denregistrer le produit en ligne nous permet de grer les rparations plus rapidement et plus efficacement. Prenezgalement le temps de lire les termes et conditions de notre garantie. 2. Dysfonctionnement. Si vous navez pas de revendeur BEHRINGER prs de chez vous, contactez le distributeur BEHRINGER de votre pays: consultez la liste des distributeurs de votre pays dans la page Support de notre site Internet behringer.com. Si votre pays nest pas dans la liste, essayez de rsoudre votre problme avec notre aideen ligne que vous trouverez galement dans la section Support du site behringer.com. Vous pouvez galement nous faire parvenir directement votre demande de rparation sous garantie par Internet sur le site behringer.com AVANT de nous renvoyer le produit. 3. Raccordement au secteur. Avant de relier cet quipement au secteur, assurez-vous que la tension secteur de votre rgion soit compatible avec lappareil. Veillez remplacer les fusibles uniquement par des modles exactement de mme taille et de mme valeur lectrique sans aucune exception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
EUROLIVE B208D/B208D-WH/B210D/ B210D-WH/B212D/B212D-WH/B215D/ B215D-WH
Responsible party name: Address:
BEHRINGER USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +Fax: +673 7647

Phone/Fax No.:

complies with the FCC rules as mentioned in the followingparagraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician forhelp. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important information: Changes or modifications to the equipment not expressly approved by BEHRINGER USA can void the users authority to use the equipment.

Professional Powered Speakers
EUROLIVE B215D/B212D B210D/B208D
EUROLIVE D Series 550/200-Watt 2-Way PA Speaker Systems with 15"/12"/10"/8" Woofer and 1.35" Aluminum-Diaphragm Compression Driver
High-power 2-way PA sound reinforcement speaker systems for live and playback applications
- B215D/B212D: 550-Watts - B210D/B208D: 200-Watts
Ultra-compact lightweight systems deliver excellent sound even at extreme sound pressure levels Revolutionary Class-D amplifier technology yields enormous power, incredible sonic performance and super-light weight Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption Integrated sound processor for ultimate system control and speaker protection with active variable high-pass filter Extremely powerful, handmade long-excursion driver provides incredibly deep bass and acoustic power B215D: 15" B212D: 12" B210D: 10" B208D: 8" State-of-the-art 1.35" aluminumdiaphragm compression driver for exceptional high-frequency reproduction Ultra-wide dispersion via large-format exponential horn Built-in ultra-low noise Mic/Line input with Volume control and Clip LED
Finally, great-sounding active loudspeakers that wont break your back or bank account! Thanks to our revolutionary Class-D amplifier technology and internal switch-mode power supplies, EUROLIVE D Series loudspeakers provide a much better power-to-weight ratio than competing active speakers. Put simply, you get all the power without the backbreaking weight. And the sound quality of these lightweight loudspeakers exceeds that of our extremely popular EUROLIVE B212A and B215A systems plus weve included two 200-Watt models, the B210D (10") and B208D (8") for less demanding applications. Due to their high-efficiency design, they crank out 550/200 of the cleanest,
punchiest audio Watts youve ever heard from a compact loudspeaker system. The integrated sound processor provides total system control, along with dependable protection of the LF and HF transducers, thanks to the built-in active high-pass filter, which virtually eliminate distortion even at extreme operating levels. In addition, all four models feature an Ultra-Low Noise (ULN) Mic/Line input with LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control. Intelligent by design One of the coolest things about active loudspeakers is the lack of back-breaking racks of amps, crossovers and EQs that are often required to make passive speaker systems sound almost as good. But that

Continued on next page

behringer.com

Page 2 of 6

Dedicated 2-band EQ Additional Line output allows linking of additional speaker systems Versatile trapezoidal enclosure design allows different positioning:

EUROLIVE B215D

LINK OUTPUT
INPUT Output Left Output Right

- Stand mounting with

35-mm pole socket
- Tilts on its side for use as
a floor monitor Two ergonomically shaped handles on B215D/B212D and one on the B210D for easy carrying High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany

XENYX 2442FX

comes with a trade-off that extra weight is transferred to the loudspeaker, making it difficult for a single user to heave all that mass onto the top of a speaker stand. BEHRINGERs D Series IntelligentDesign merges the best features of active loudspeakers with significantly lower weight by using switch-mode power supplies and Class-D amplifier topology. Hidden deep inside each enclosure is the equivalent of an active 2-way electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter and two Class-D power amplifiers, yet overall weight is less than comparable loudspeaker systems! These components
work together seamlessly to provide optimum sound quality and it all takes place automatically, without you having to touch a single knob. Class-D Amplifier Technology delivers high power with low weight. Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly reduces the power losses in the output devices. This is easy in theory and complex in practice, which is why there are so many different

Page 3 of 6

Class-D designs. Without boring you with terms like PWM Generation and Gate Drivers, lets just say that to realize the benefits of a Class-D design requires compensating for a lot of potential problems that can cause audible distortion. BEHRINGER didnt invent Class-D technology, but our R&D Department has been working for years to perfect our own version with all the benefits of reduced weight and cool running, and none of the drawbacks. Thats why we invested over a solid year of research time eliminating pitfalls like quantizing errors and excess dead time, selecting just the right switching frequency (and other equally tech-y terms). And why we spent an equally long time testing individual components to ensure they will stand up to the rigors of the real world. When combined with switching-mode power supplies that replace heavy toroid transformers, our new designs provide more dynamic punch since the higher switching frequency reloads the supplys capacitors much faster. And, because they are so much more efficient, the D Series runs cooler and doesnt require huge, heavy heat sinks. The resulting speakers systems are much lighter, making them easy to transport and set up. Our no-compromise design means your

" input jack for balanced TRS and unbalanced TS connections
LEVEL control with CLIP LED for optimizing input signal level
MIC/LINE input jack with internal microphone preamplifier for balanced XLR connections
EQ HIGH & LOW shelving equalization controls cuts or boosts the treble (12kHz) and bass (80Hz) range by 15 dB
LINK OUTPUT XLR jack lets you connect additional BEHRINGER active loudspeaker systems

Power LED

D Series active loudspeakers will deliver full power and incredible fidelity all night long, with no need for rest cycles. Instant PA system With just a single D Series loudspeaker system and a microphone or MP3 player, you can set up an instant sound system. Thanks to the built-in preamp section, you just connect a dynamic mic and raise and lower the volume with the Level control. Plug in your sound source, place the speaker on a tabletop or stand, and power up. Its just that easy. And if you need more coverage, simply use the convenient LINK OUTPUT XLR connector to add more active loudspeakers. Stereo music system You can even use two D Series enclosures for stereo playback of your MP3, CD or old-skool cassette deck without any additional hardware. Just plug the appropriate stereo breakout adapter into your decks output jack and run the cables to the " inputs on each loudspeaker. Set the Level and EQ controls the same on both enclosures. Voil, instant party!
Marvelous monitoring Thanks to their trapezoidal design, these cabinets can be laid on their side providing the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single XLR or " cable from the monitor send on your mixing console and, of course, power. Additional monitors can be chained together via the XLR LINK OUTPUT jack on the rear panel. Custom-designed transducers Lets face it; the transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we dont cut any corners. While some of our competitors are content to buy off-the-shelf transducers and plug them into their boxes, we custom-design and build our transducers from scratch. Not only do we wind our own voice coils, we process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components, like the long-excursion LF transducers and state-of-the-art 1.35" compression drivers we deploy in each and every EUROLIVE enclosure.

Page 4 of 6

Low frequency response The EUROLIVE D Series was built with extended low frequency handling in mind. With a tuned port, internally braced, injection molded enclosure, each models custom-designed LF transducer (woofer) really cranks out tight low end. Keep in mind that bass response varies according to LF transducer size, so the larger the speaker, the more bass you will be able to generate.
Accurate non-fatiguing midrange and treble Even if your particular application doesnt include booming bass, youll love the sheer accuracy of these loudspeakers. Over a year of design went into a exponential horn/aluminum dome compression driver combination that could do justice to loud hard rock or dance music yet could also satisfy audiophiles with its musical timbre and attention to detail. For spoken word, singing or acoustical instruments, they are un-matched for being able to articulate complex harmonic details. In fact, many customers think its the most naturalsounding speaker theyve ever heard at anywhere near the price.
Processor controlled output Dynamic processing is one of the best ways to maximize output without sacrificing sound quality. The D Series built-in circuitry automatically adjusts program content, allowing the loudspeaker to operate at extreme levels. It accomplishes this by reducing bass output slightly as you approach the limit of the transducers. This frees up LF amp and transducer resources, so that higher overall volume can be realized. Its like having a tiny soundman inside each cabinet constantly monitoring and changing output parameters. By making subtle changes to the crossover frequency and the audio content, the system is able to crank out more sound without the slightest hint of distortion.
Ergonomically shaped carry handles on each side of enclosure for easy transport of system. Two handles on B212D/B215D, one on B210D Impact resistant, molded enclosure. Trapezoid shape allows use as a powered monitor wedge
State-of-the-art 1.35" aluminumdiaphragm compression driver for exceptional high-frequency reproduction Ultra-wide dispersion and large format horn
Extremely powerful 15"/12"/10"/8" long-excursion LF transducer provides incredibly deep bass and acoustic power
Rubber feet for stacking enclosure on structures or subwoofers
138" (35-mm) pole socket for standard speaker stands

Page 5 of 6

Massive power to size ratio Cutting-edge technology and high-fidelity speakers are not all it takes to get your message across you need power, and lots of it. At the heart of each EUROLIVE D Series loudspeaker are two high-current amplifiers with a total output of 550-Watts for the B212D/B215D and 200-Watts for the B210D/B208D. Theyre capable of driving the speakers to their maximum with no distortion and without speaker damage, thanks to active internal protection circuits. Put simply, they will astound you with their massive punch, smooth mids and articulate top-end! Which speaker do I need? As youve probably noticed, we make these active loudspeakers in four different woofer sizes. Which one is right for you? Well, lets start with your application. Is it spoken word in a hotel ballroom? Hard rock in a park? A folk singer or a drum n bass DJ? Loud enough for an 18-year old or loud enough for your grandmother? A huge auditorium or a tiny club? Physics are physics and a 15" low frequency transducer has almost 40% more surface area with which to move
air than a 12". A 12" has 30% more area than a 10", and a 10" has 35% more than an 8". So the easiest answer is Whether to choose one speaker cabinet over another depends on your bass requirements. If youre addressing a small meeting, or demoing the latest slice-o-chop-ovegamatic at the swap meet or county fair, the B208D might be all the speaker youll need. But if youre providing disco to the masses at a standing room only nightclub or you just need to crank it up louder, then the B215D may be a better choice. As you can see, Bass requirements isnt quite as easy an answer as it sounds. The larger a rooms cubic volume, the more energy is required to achieve a given level of bass. In other words, when playing the same tune in a big room versus a small room, big room = less bass; small room = more bass. Confused yet? We suggest that you consult your BEHRINGER dealer for more advice on this subject, which is also a good time to do a listening test against their competition and against each other. Judge for yourself. And then own BEHRINGER with money to spare.

XM1800S

Electric Guitar

Keyboard

EPA900

EUROLIVE B210D

Page 6 of 6
OUTPUT POWER Low-frequency range Level control Input Trim Max. input level Link Connector to + 30 dB +22 dBu

B212D/B215D

USA / Canada UK / Australia Europe Japan Power consumption Mains connection 120 V, 60 Hz (T 6.3 A H 250 V) 240 V~, 50 Hz (T 3.15 A H 250 V) 230 V~, 50 Hz (T 3.15 A H 250 V) 100 V~, 50-60 Hz (T 6.3 A H 250 V) max. 600 Watts Standard IEC receptacle

B208D/B210D

RMS @ 1% THD Peak power 135 W @ W @ 8

XLR connector

RMS power Peak power 280 W @ W @ 8

LOUDSPEAKER SYSTEM DATA

Frequency response Crossover frequency Sound pressure level Limiter Dynamic equalizer 65 Hz to 20 kHz 24 kHz max. 113 dB SPL @ 1 m Optical Processor-controlled

DIMENSIONS/WEIGHT

High-frequency range
Dimensions (HxWxD) 14.70 x 8.00 x 9.80" 249 x 205 x 372 mm Weight 14.70 lbs / 6.70 kg
RMS @ 1% THD Peak power 38 W @ W @ 8
RMS power Peak power 65 W @ W @ 8
Frequency response Crossover frequency Sound pressure level Limiter Dynamic equalizer 65 Hz to 20 kHz 2.4 kHz max. 125 dB SPL @ 1 m Optical Processor-controlled
Dimensions (HxWxD) 18.30 x 11.50 x 9.60" 464 x 292 x 244 mm Weight 18.80 lbs / 8.50 kg
SPEAKER POWER CAPACITY Woofer
Dimensions (HxWxD) approx. 21.70 x 13.60 x 10.60" approx. 550 x 345 x 270 mm Weight 31.9 lbs / 14.5 kg
Size 12" RMS @ 1% THD 250 W @ 8 Peak power handling 1000 W @ 8
Frequency response Crossover frequency Sound pressure level Limiter Dynamic equalizer EQUALIZER HIGH LOW POWER SUPPLY Voltage (Fuses) 55 Hz to 20 kHz 1.9 kHz max. 126 dB SPL @ 1 m Optical Processor-controlled
Dimensions (HxWxD) approx. 27.2 x 17.3 x 13.2" approx. 690 x 440 x 335 mm Weight 45.2 lbs / 20.54 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

Size 15" RMS @ 1% THD 250 W @ 8 Peak power handling 1000 W @ 8 Tweeter
12 kHz / 15 dB 80 Hz / 15 dB
RMS @ 1% THD 30 W @ 8 Peak power handling 120 W @ 8 AUDIO INPUTS XLR (servo-balanced) Sensitivity -40 dBu to +4 dBu Input impedance 20 k " TRS jack (servo-balanced) Sensitivity -40 dBu to +4 dBu Input impedance 20 k
USA / Canada UK / Australia Europe Japan Power consumption Mains connection 120 V, 60 Hz (T 4.0 A H 250 V) 240 V~, 50 Hz (T 2.0 A H 250 V) 230 V~, 50 Hz (T 2.0 A H 250 V) 100 V~, 50-60 Hz (T 4.0 A H 250 V) max. 300 Watts Standard IEC receptacle
For service, support or more information contact the BEHRINGER location nearest you: Europe Tel.: +9206 4149, Fax: +Australia Tel.: +9877 7170, Fax: +USA/Canada Tel.: 672 0816, Fax: +Japan Tel.: +5281 1180, Fax: +Singapore Tel.: +1800, Fax: +0275
2010 Red Chip Company Ltd. Technical specications and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph or statement contained herein.985-10000-00401