Quick Start Guide

Check out behringer.com for expanded Owner Manuals

TRUTH B3030A/B3031A

2-Way Active Ribbon Studio Reference Monitor with Kevlar Woofer
Important Safety Instructions
Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with " TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel. Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Limited Warranty

1 Warranty
[1] This limited warranty is valid only if you purchased the product from a BEHRINGER authorized dealer in the country of purchase. A list of authorized dealers can be found on BEHRINGERs website behringer.com under Where to Buy, or you can contact the BEHRINGER office closest to you. [2] MUSIC Group* warrants the mechanical and electronic components of this product to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of purchase (see the Limited Warranty terms in 4 below), unless a longer minimum warranty period is mandated by applicable local laws. If the product shows any defects within the specified warranty period and that defect is not excluded under 4, MUSIC Group shall, at its discretion, either replace or repair the product using suitable new or reconditioned product or parts. In case MUSIC Group decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e., one (1) year (or otherwise applicable minimum warranty period) from the date of purchase of the original product. [3] Upon validation of the warranty claim, the repaired or replacement product will be returned to the user freight prepaid by MUSIC Group. [4] Warranty claims other than those indicated above are expressly excluded. PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE.

[2] Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group. [3] Shipments without freight prepaid will not be accepted.
2 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase at behringer.com under Support and kindly read the terms and conditions of our limited warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation! 3 Return materials authorization [1] To obtain warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may contact the BEHRINGER distributor for your country listed under Support at behringer.com. If your country is not listed, please check if your problem can be dealt with by our Online Support which may also be found under Support at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product. After verifying the products warranty eligibility with the original sales receipt, MUSIC Group will then issue a Return Materials Authorization (RMA) number.

Legal Disclaimer

Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. BEHRINGER products are sold through authorized dealers only. Distributors and dealers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of Red Chip Company Ltd. ALL RIGHTS RESERVED. 2010 Red Chip Company Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands

4 Warranty Exclusions [1] This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries. Where applicable, MUSIC Group warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase. [2] This limited warranty does not cover the product if it has been electronically or mechanically modified in any way. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. This limited warranty does not cover any such modification/adaptation, regardless of whether it was carried out properly or not. Under the terms of this limited warranty, MUSIC Group shall not be held responsible for any cost resulting from such a modification/adaptation. [3] This limited warranty covers only the product hardware. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product. Any such software is provided AS IS unless expressly provided for in any enclosed software limited warranty. [4] This limited warranty is invalid if the factoryapplied serial number has been altered or removed from the product. [5] Free inspections and maintenance/repair work are expressly excluded from this limited warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, guitar strings, illuminants and similar parts. [6] Damage/defects caused by the following conditions are not covered by this limited warranty: improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; damage/defects caused by acts of God/Nature (accident, fire, flood, etc) or any other condition that is beyond the control of MUSIC Group.

[7] Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the limited warranty. [8] If an inspection of the product by MUSIC Group shows that the defect in question is not covered by the limited warranty, the inspection costs are payable by the customer. [9] Products which do not meet the terms of this limited warranty will be repaired exclusively at the buyers expense. MUSIC Group or its authorized service center will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, MUSIC Group will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order. [10] Authorized BEHRINGER dealers do not sell new products directly in online auctions. Purchases made through an online auction are on a buyer beware basis. Online auction confirmations or sales receipts are not accepted for warranty verification and MUSIC Group will not repair or replace any product purchased through an online auction.

9 Amendment

Warranty service conditions are subject to change without notice. For the latest warranty terms and conditions and additional information regarding MUSIC Groups limited warranty, please see complete details online at behringer.com.
* MUSIC Group Macao Commercial Oshore Limited of Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau, including all MUSIC Group companies
5 Warranty transferability This limited warranty is extended exclusively to the original buyer (customer of authorized retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of MUSIC Group. 6 Claim for damage
Subject only to the operation of mandatory applicable local laws, MUSIC Group shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind. In no event shall the liability of MUSIC Group under this limited warranty exceed the invoiced value of the product.
7 Limitation of liability This limited warranty is the complete and exclusive warranty between you and MUSIC Group. It supersedes all other written or oral communications related to this product. MUSIC Group provides no other warranties for this product. 8 Other warranty rights and national law [1] This limited warranty does not exclude or limit the buyers statutory rights as a consumer in any way. [2] The limited warranty regulations mentioned herein are applicable unless they constitute an infringement of applicable mandatory local laws. [3] This warranty does not detract from the sellers obligations in regard to any lack of conformity of the product and any hidden defect.

Room Compensation

High Frequency Power Supply Voltage/Fuses 100 - 120 V~, 50/60 Hz 220 - 230 V~, 50/60 Hz Power consumption Mains connection Dimensions/Weight Dimensions (H x W x D) Weight 12.5 x 8.4 x 8.3" 15 x 215 x 210 mm 22 lbs / 10 kg T 2.0 A H 250 V T 1.6 A H 250 V max. 110 W
Frecuencias agudas Fuente de Alimentacin T 5.0 A H 250 V T 2.5 A H 250 V max. 200 W Fusible 100 - 120 V~, 50/60 Hz 220 - 230 V~, 50/60 Hz Consumo Conexin de corriente Dimensiones 15.8 x 9.8 x 11.4" 400 x 250 x 290 mm 33 lbs / 15 kg Dimensiones (A x L x P) Peso 315 x 215 x 210 mm 22 lbs / 10 kg T 2.0 A H 250 V T 1.6 A H 250 V max. 110 W
T 5.0 A H 250 V T 2.5 A H 250 V max. 200 W Conector IEC standard 400 x 250 x 290 mm 33 lbs / 15 kg

Standard IEC connector

Caractristiques techniques
B3030A Entres Audio XLR Jack stro 6,35 mm impdance dentre Gain dentre Niveau dentre maximum Haut-Parleurs Tweeter Woofer Puissance de Sortie Efficace avec distorsion harmonique de 0,1 % (sinus) Crte Filtrage Type Frquence de coupure Mesures Systme Rponse en frquence Niveau de pression sonore Basses frquences 50 Hz to 24 kHz 113 dB SPL maximum 1 m (paire) 0 dB @ 60 Hz 2 dB @ 60 Hz 4 dB @ 60 Hz 6 dB @ 60 Hz 0 dB @ 300 Hz 2 dB @ 300 Hz 4 dB @ 300 Hz 6 dB @ 300 Hz +2 dB @ 8 kHz 0 dB @ 8 kHz 2 dB @ 8 kHz 4 dB @ 8 kHz 116 dB SPL maximum 1 m (paire) Actif 3.6 kHz 75 W 140 W 150 W 285 W 2" ribbon 17 cm, membrane au Kevlar 22 cm, membrane au Kevlar Entre symtrique Entre symtrique 10 k 6 dB to +6 dB +22 dBu B3031A
Compensation de lespace dcoute
Hautes frquences Alimentation Fusible 100 - 120 V~, 50/60 Hz 220 - 230 V~, 50/60 Hz Consommation lectrique Embase secteur Dimensions Dimensions (h x l x p) Poids 315 x 215 x 210 mm 22 lbs / 10 kg T 2.0 A H 250 V T 1.6 A H 250 V max. 110 W
T 5.0 A H 250 V T 2.5 A H 250 V max. 200 W Embase IEC standard 400 x 250 x 290 mm 33 lbs / 15 kg
Other important information

Important information

1. Register online. Please register your new BEHRINGER equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, ifapplicable. 2. Malfunction. Should your BEHRINGER dealer not be located in your vicinity, you may contact the BEHRINGER distributor for your country listed under Support at behringer.com. Should your country not be listed, please check if your problem can be dealt with by our OnlineSupport which may also be found under Support at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning theproduct. 3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

Informations importantes

1. Enregistrez-vous en ligne. Prenez le temps denregistrer votre produit BEHRINGER aussi vite que possible sur le site Internet behringer.com. Le fait denregistrer le produit en ligne nous permet de grer les rparations plus rapidement et plus efficacement. Prenezgalement le temps de lire les termes et conditions de notre garantie. 2. Dysfonctionnement. Si vous navez pas de revendeur BEHRINGER prs de chez vous, contactez le distributeur BEHRINGER de votre pays: consultez la liste des distributeurs de votre pays dans la page Support de notre site Internet behringer.com. Si votre pays nest pas dans la liste, essayez de rsoudre votre problme avec notre aideen ligne que vous trouverez galement dans la section Support du site behringer.com. Vous pouvez galement nous faire parvenir directement votre demande de rparation sous garantie par Internet sur le site behringer.com AVANT de nous renvoyer le produit. 3. Raccordement au secteur. Avant de relier cet quipement au secteur, assurez-vous que la tension secteur de votre rgion soit compatible avec lappareil. Veillez remplacer les fusibles uniquement par des modles exactement de mme taille et de mme valeur lectrique sans aucune exception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible party name: Address: MUSIC Group Services USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +Fax: +673 7647

Phone/Fax No.:

complies with the FCC rules as mentioned in the followingparagraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician forhelp. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important information: Changes or modifications to the equipment not expressly approved by MUSIC Group can void the users authority to use the equipment.

Studio Monitors

TRUTH B3030A/B3031A
TRUTH 2-Way Active Ribbon Studio Reference Monitor with Kevlar Woofer Ultra-linear frequency response with individual frequency diagrams Built-in 150 and 75 watt power amplifiers (75 and 35 watt for B3030A) with enormous power reserve Ultra-high resolution, 2" velocity ribbon transducer for ultimate sound reproduction Long-throw 8 " woofer (6 " for B3030A) with deformation-resistant Kevlar cone and aluminum die-cast chassis for ultimate bass response Controlled dispersion characteristics and extremely large sweet spot owing to the unique BEHRINGER wave guide technology Active crossover network with 4th order Linkwitz-Riley filters Adjustable to a wide range of acoustic conditions and subwoofer operation Separately controlled limiter for low and high-frequency overload protection Magnetic shielding allows placement near computer monitors Servo-balanced inputs with XLR and " TRS connectors High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany Honesty When it comes to your studio recordings, you want honesty. In fact, considering how important your art is, you should demand it! Thats why we designed the new B3030A and B3031A Reference Monitors to speak nothing but the TRUTH. Oh, they still sound great hooked up to your stereo or your video surround system, but they were really built with the studio in mind where every note you play or sing is under the microscope. Built on a Legacy Our TRUTH B2030A and B2031A monitors have been so wildly successful that weve sold thousands upon thousands of them to some of the most critical ears on the planet. So, from the moment we started this project, we knew these new speakers would have to be something really special, and indeed they are! Years of RnD For the past two years our Resead Development team has been on a mission to create the perfect studio monitor. Since the TRUTH B2031A had already become the industry standard, our acoustic engineers decided to start there and see just how far they could push the envelope. They tried a variety of transducers and enclosure designs, along with existing and emerging technologies. When all the dust settled, they chose to deploy an ultra-high resolution, 2" velocity ribbon transducer and a long-throw, Kevlar-coned woofer in a deformation-resistant, die-cast aluminum chassis. Why Kevlar? Were glad you asked. Kevlar has an incredible strength-to-weight ratio thats one reason its used in bulletproof vests. Kevlar gives our LF transducer the strength to handle the extremely high energy levels required for distortion-free, chest-pounding bass. And since they have such low mass, Kevlar speaker cones also respond much more quickly than those made of paper, important for not only maintaining bass content integrity, but critical for midrange accuracy and definition. Our Kevlar transducers reproduce even the subtlest nuance of the low-frequency realm without muddying the midrange.

Continued on next page

Page 2 of 4

Power to the People

Whats with the funny-looking tweeter? Ribbon tweeters bring a level of accuracy and sophistication to highresolution studio monitors that was previously unattainable. They provide exceptionally wide horizontal dispersion (for a larger sweet-spot), while holding the vertical dispersion extremely tight. And since our ribbon transducer diaphragm is virtually weightless, it reacts instantaneously to changes in the high-frequency content. Now, not only do you hear the dulcet tones of a flute, you hear the breath flowing through it. You hear the wind chimes bouncing off each other. You can hear the fingernails on the nylon strings of a classical guitar Another reason why ribbon tweeters are so supremely accurate is their ability to reproduce frequencies far above our normal hearing range. Even though we cant hear these ultrasonics, the lower harmonics they generate do affect the way we experience the stereo image. For instance, a 30 kHz signal is too high for us to hear, but we can hear its first sub-harmonic (15 kHz), second sub-harmonic (7.5 kHz), and third (3.75 kHz), etc. All these sub-harmonics combine with the primary sound to create stunning realism.

It takes quite a bit more than just a bulletproof woofer and a high-tech ribbon tweeter stuck inside a fancy box to make a studio monitor of this class. It also takes power and lots of it! But even more importantly, that power has to be matched to the individual high- and low-frequency tranducers. While some of our competitors are content to stick whatever speakers they have on the shelf into haphazardly designed boxes and then strap on a one-size-fits-all amplifier package, we build every single component from the ground up. We pack 225-Watts of bi-amped technology (including a time- and phase-corrected active crossover)
into every B3031A (110-Watts for B3030A), ensuring that you have the enormous power reserves youll need to drive them really hard. Designed to Work in Your Environment The ideal environment for listening is a room that is flat, neither too reflective (echoes) nor too absorptive (where the sound is muffled). But since all rooms are not the same acoustically, all TRUTH monitors come equipped to function in a wide variety of situations. Switches are provided to adapt the monitors lowand high-frequency characteristics for optimal performance specific to your listening environment.

Surround Sound Setup

Video Monitor

Surround Sound Decoder

Subwoofer

B3031A

Page 3 of 4
Placement is also critical. Ideally, all loudspeakers should be placed away from walls to ensure proper bass response. But fear not, B3030A/B3031A monitors feature Room Compensation switches so you can place them against walls, or even in corners. Walls tend to enhance low-frequency content, and corners exaggerate bass even more, but your TRUTH monitor can be custom-tailored to provide honest bass response for your situation, with the simple flick of a switch or two. Non-fatiguing, Wide Sweet Spot While some of our competitors studio monitors have a highly focused sweet spot (the optimal listening position for a pair of loudspeakers), our wave-guide is designed to create a much more generous, broader listening zone. That means you wont wear a hole in the carpet in that one spot where everything sounds great. You are free to move around inside the stereo image to find the ideal spot in the mix for subtle instrument or effects placement opportunities. You also wont suffer the ravages of monitor-fatigue-syndrome, an ailment that comes from listening to harsh high-mids and treble content for hours on end. The new 2" velocity ribbon transducer, along with our proprietary wave-guide design, generates silky-smooth high-end that is non-fatiguing, even during those all-night mix-down sessions that can test your nerves. Hearing is Believing We could bore you to tears with all the technical jargon (if you really like that stuff, theres a special treat at the end), but hearing the TRUTH will make you a believer. From the bulletproof bass of its Kevlar woofer to the silky top-end of its ribbon transducer, we think youll agree that nothing in this class outperforms the B3030A and B3031A monitors. Compare them to the competition and own BEHRINGER!

Computer Setup

energyXT2.5 software sold separately
UCA222 USB Audio Interface

Recording

B3031A Control Out Left and Right

XM8500

V-AMP PRO

X2222USB

Page 4 of 4
Power switch 2" velocity ribbon HF transducer (tweeter) Low Frequency switch for use with subs or to simulate smaller speakers Power Mode switch On/ Off/Auto (B3031A only) - Auto mode puts system in standby until signal detected Input Trim control sets volume level Input accepts XLR and " TRS Room Compensation switch adjusts bass when speakers are placed against walls or in corners High Frequency switch adjusts treble content Mute Low and Mute High switches (B3031A only, for service technician) IEC power socket
HF waveguide Power/Limit LEDs show power on and input signal overload Kevlar LF transducer (woofer)

SPECIFICATIONS

High-frequency range
25 W @ W @ - 120 V~, 50/60 Hz 220 - 230 V~, 50/60 Hz T 5.0 A H 250 V T 2.5 A H 250 V

B3030A/B3031A

Audio Inputs XLR connector " TRS Input impedance Input Trim Max. input level TRANSDUCERS servo-balanced input servo-balanced input 10 k 6 dB to +6 dB +22 dBu

B3030A

RMS @ 0.1 % THD (sine wave) Peak power
Power consumption Mains connection max. 110 W Standard IEC connector
RMS @ 0.1 % THD (sine wave) Peak power CROSSOVER 30 W @ W @ 6
Power consumption Mains connection max. 200 W Standard IEC connector
2" ribbon 6 " diameter Kevlar diaphragm Type Crossover frequency SYSTEM SPECIFICATION active, 4th order Linkwitz-Riley 3.6 kHz
High-frequency driver Low-frequency driver

DIMENSIONS/WEIGHT

Dimensions (HxWxD) Weight 12.50 x 8.40 x 8.33" 315 x 215 x 210 mm 22 lbs/10 kg
High-frequency driver Low-frequency driver AMPLIFIER OUTPUT POWER Low-frequency range 2" ribbon 8 " diameter Kevlar diaphragm
Frequency response Sound pressure level 50 Hz to 24 kHz max. 113 dB SPL @ 1 m (pair)
Dimensions (HxWxD) Weight 15.75 x 9.81 x 11.38" 400 x 250 x 290 mm 33 lbs/15 kg
Frequency response Sound pressure level POWER SUPPLY 50 W @ W @ 4 Voltage/Fuses 50 Hz to 24 kHz max. 116 dB SPL @ 1 m (pair)
RMS @ 0.1 % THD (sine wave) Peak power 100 W @ W @ 4
100 - 120 V~, 50/60 Hz 220 - 230 V~, 50/60 Hz T 2.0 A H 250 V T 1.6 A H 250 V
Please note these specifications are preliminary and conceptual in nature, and as such are subject to change as product development progresses. This information is supplied for market research purposes only and is not to be made public in any manner. This document is solely the property of The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner.
For service, support or more information contact the BEHRINGER location nearest you: Europe Tel.: +Singapore Tel.: +1800 Fax: +Fax: +0275 USA/Canada Tel.: +Australia Tel.: +Fax: +Fax: +9877 7870

Tel.: +Fax: +5281 1181

2010 Red Chip Company Ltd. Technical specications and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00360