Reviews & Opinions
Independent and trusted. Read before buy Behringer BX3000T!

Behringer BX3000T

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Behringer BX3000T, size: 2.5 MB
Related manuals
Behringer BX3000T Technical Specifications

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Behringer BX3000TAbout Behringer BX3000T
Here you can find all about Behringer BX3000T like review and other informations. For example: manual, price, bass amp, head.

Behringer BX3000T manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Behringer BX3000T please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Behringer BX3000T photo ]

Video review

Improv

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

BX3000T

Users Manual

Version 1.1 October 2003

ULTRABASS

ENGLISH

ULTRABASS BX3000T
IMPORTANT SAFETY INSTRUCTIONS
DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. 5) Do not use this device near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, extension cords, and the point at which they exit the unit. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the device. When a cart is used, use caution when moving the cart/ device combination to avoid injury from stumbling over it.

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
13) Unplug this device during lightning storms or when not used for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
300-Watt bass amplifier with DYNAMIZER technology
s Extremely powerful 300-Watt RMS bass amp head s Patented* DYNAMIZER technology for ultimate punch
s Switchable ULTRABASS sub-harmonics processor for unbelievable low-end power s Revolutionary SHAPE filter for extreme sound range
s Extremely musical 5-band EQ with Bright and Deep functions for ultimate tone-shaping
s Integrated limiter and active, temperature-controlled cooling system for ultimate protection s Vintage-style VU meter for precise signal level control s Dual footswitch for ULTRABASS and SHAPE functions included s Balanced XLR DI output, easily accessible on the front panel s Effects loop with tuner function and line output for additional flexibility s 3 speaker outputs on 1/4" jack and SPEAKON connectors
s Ultra-rugged power supply with toroidal transformer for highest power reserves
s Extremely rugged construction ensures long life, even under the most demanding conditions s Designed in Germany. Manufactured under ISO9000 certified management system

* German Patent No.: 833

FOREWORD
Dear Customer, Welcome to the team of ULTRABASS users and thank you very much for expressing your confidence in BEHRINGER products by purchasing the BEHRINGER BX3000T. It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of hard work delivered by our engineering team to reach a very ambitious goal: to present you with an outstanding bass workstation that gives you maximum flexibility and performance with its unique sound character and broad range of functions. The task to design the new ULTRABASS certainly meant a great deal of responsibility, which we assumed by focusing on you, the discerning user and musician. It also meant a lot of work and night shifts to accomplish this goal. But it was fun, too. Developing a product usually brings a lot of people together, and what a great feeling it is when everybody who participated in such a project can be proud of what weve achieved. It is our philosophy to share our joy with you, because you are the most important member of the BEHRINGER team. With your highly competent suggestions for new products youve greatly contributed to shaping our company and making it successful. In return, we guarantee you uncompromising quality (manufactured under ISO9000 certified management system) as well as excellent technical and audio properties at an extremely favorable price. All of this will enable you to fully unfold your creativity without being hampered by budget constraints. We are often asked how we can produce such high-grade devices at such unbelievably low prices. The answer is quite simple: its you, our customers! Many satisfied customers means large sales volumes enabling us to get better conditions of purchase for components, etc. Isnt it only fair to pass this benefit back to you? Because we know that your success is our success, too! I would like to thank all people whose help on Project ULTRABASS has made it all possible. Everybody has made very personal contributions, starting from the designers of the unit to the many staff members in our company and finally to you, the users of BEHRINGER products.

TABLE OF CONTENTS

1. INTRODUCTION.. 5
1.1 The design concept... 5 1.1.1 Patented DYNAMIZER technology.. 5 1.2 Before you get started... 5 1.2.1 Shipment... 5 1.2.2 Initial operation.. 5 1.2.3 Warranty.. 5

2. CONTROL ELEMENTS.. 6

2.1 Front panel... 6 2.2 Rear panel... 7

3. WIRING EXAMPLES... 7

3.1 Standard setup comprising footswitch and one loudspeaker... 7 3.2 Expanded setup with tuner and connection to a mixing console.. 7 3.3 Connecting several loudspeakers.. 8 3.3.1 Calculating the total impedance when connecting several loudspeakers.. 8 3.4 Connection of a multi-effects processor.. 8 3.5 Setup for master/slave operation.. 8 3.5.1 ULTRABASS BX3000T as master.. 8 3.5.2 ULTRABASS BX3000T as slave controlled by an external amp/preamp. 8
4. SHAPE FUNCTION... 8 5. ULTRABASS FUNCTION.. 9 6. INSTALLATION... 9
6.1 Mains connection... 9 6.2 Audio connections.. 9 6.2.1 Loudspeaker connections.. 9
7. SPECIFICATIONS... 10 8. WARRANTY.. 11
My friends, its been worth the trouble!

Thank you very much,

Uli Behringer

WARNING!

It should be pointed out that extreme output volumes may damage your hearing and/or your headphones. Turn down all LEVEL controls before you switch on the unit. Always set the volume at an appropriate level.

1. INTRODUCTION

Congratulations! With the BX3000T you have acquired a prolevel amplifier from our BX bass amplifier series. This revolutionary bass amplifier top has many of the features of our successful BX1200. Our top goal when designing the BX3000T was to set new standards. In fact, the BX3000T is a bass amp that gives you a full set of features plus a comprehensive range of connection and expansion options. With this amp youll certainly rattle the planet! BEHRINGER is an audio engineering company that has been successfully developing products for studio and live applications for many years now. Our range of products includes microphones and a variety of 19" devices (compressors, enhancers, noise gates, tube processors, headphone amps, digital effects devices, DI boxes, etc.) as well as monitoring and P.A. speakers plus professional live and recording consoles. You will find all of our technical know-how combined in your BX3000T. Flexibility has become a particularly important factor in the music business over the past few years. Modern bass players need to offer a broad range of sounds, but should still be able to play in different kinds of applications at short notice: home recording, studio, live concerts. For this reason, it has always been our prime concern to give you a bass amplifier that offers a complete set of useful functions, but can still be operated intuitively and quickly. Additionally, the world of electric bass playing has changed: new basses, with five or six strings, are being launched all the time, there are effects devices and the desire to create ones own unique soundwhich can only be achieved with innovative amplifiers. Our unique ULTRABASS BX3000T gives you pioneering sounds and power galore. We have expanded our BX Series with this amplifier top to give you all the freedom you need when expanding your set-up. No matter which speakers or cabinets you preferwith its superb sound, your BX3000T will bring some life into your speaker. As technology advances, youve got to keep track of the latest technological breakthroughs to avoid falling by the wayside. Which is what we did, by continuously improving this bass amplifier and including many of your valuable suggestions. Experience a new-generation bass amp with fascinating features: s s s s s s Astounding sound diversity through SHAPE filter and ULTRABASS sub-harmonics processor. Unbelievable punch through innovative DYNAMIZER preamp technology. More gain, but no distortion through built-in limiter. Optimum level metering through clearly visible VU meter. A 5-band EQ with additional Deep and Bright functions meets all requirements in terms of tone-shaping. Plenty of power plus a built-in DI outputeven on big stages youll cut a fine figure with your BX3000T. signal peaks can therefore be seen as one of its most essential quality features. Many manufacturers use limiters preceding the power stage to limit dynamic signal peaks. However, the problem is the preamp, which is why weve equipped the BX3000T with our unique DYNAMIZER preamp circuitry that gives you a lively and punchy sound with signal peakseven if the amp reaches its power limits. Extreme signal peaks are limited effectively while the average level and hence the power of the overall signal is raised. The sound gets more vivid and powerful in character, without any unmusical distortion. With its limiter in the power stage it is virtually impossible to overdrive the ULTRABASS BX3000T.

1.2 Before you get started

1.2.1 Shipment

Your BX3000T was carefully packed at the factory and the packaging is designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage that may have occurred during transit.
If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee.

1.2.2 Initial operation

Be sure that there is enough space around the unit for cooling and please do not place the ULTRABASS on high temperature devices such as radiators etc. to avoid overheating.
Before you connect your ULTRABASS to the mains, please make sure that your local voltage matches the voltage required by the unit:
The fuse holder on the female mains connector has 3 triangular markings, with two of these triangles opposing each other. The ULTRABASS is set to the operating voltage printed next to these markers and can be set to another voltage by turning the fuse holder by 180. CAUTION: This instruction does not apply to export models exclusively designed e.g. for 120 V operation!
If you set the unit to a different mains voltage, be sure to use a fuse of the correct type and rating. Please refer to the SPECIFICATIONS for details. Blown fuses must be replaced by fuses of the same type and rating! Please refer to the SPECIFICATIONS for details.
The mains connection of the BX3000T is made by using the enclosed mains cable and a standard IEC receptacle. It meets all of the international safety certification requirements.

1.1 The design concept

This absolutely low-noise and indestructible bass amp represents the current state of the art. The rugged enclosure of your ULTRABASS ensures that the unit will withstand rough handling on the road over many years.
Please make sure that all units have a proper ground connection. For your own safety, never remove or disable the ground conductor from the unit or of the AC power cord.

1.2.3 Warranty

Please take the time to fill in and return the warranty card within 14 days after the date of purchase, so as to benefit from our extended warranty. The serial number is printed on the top side of the unit. Or register online at www.behringer.com.
1.1.1 Patented DYNAMIZER technology
When it comes to amplifying the signals delivered by electric instruments, youve got to separate the wheat from the chaff. Unlike mixed or mastered signals, electric instruments usually deliver extremely high signal peaks which, when raised in gain, produce nasty distortion. How an amplifier responds to these

2. CONTROL ELEMENTS

2.1 Front panel
The BASS control in the EQ section allows you to boost or cut the bass frequencies at approx. 50 Hz. Press the DEEP switch to add low frequencies (ranging from 30 - 200 Hz) to your bass sound. When the DEEP function is switched on, the LED above the switch lights up. This control governs the upper bass-frequency range at approx. 140 Hz. The MIDDLE control allows you to boost/cut the low midrange frequencies at approx. 500 Hz. This control raises/lowers the high midrange frequencies at approx. 1.6 kHz. The TREBLE control governs the high-frequency range on your BX3000T at approx. 7.5 kHz. Use this switch to enable/disable the BRIGHT effect, which adds some brilliance to the treble frequencies in the range from 2 - 20 kHz. When the BRIGHT function is on, its respective LED lights up. Fig. 2.1: BX3000T front panel (section 1) The LEVEL VU meter reads the level that is applied to the preamp circuitry of the BX3000T. If the GAIN control is set fully counterclockwise, the VU meter reads the input level only. Selecting instead of Passive is recommended Active if the input level appears too high (in the right-hand third of the VU meter). Use the GAIN control to set the amplifier properly (so that the meter is in the mid region). The overall volume can be adjusted with the OUTPUT control. These are the inputs for your electric bass guitar. The PASSIVE jack is for passive basses, the ACTIVE jack for active instruments with high output levels. The ACTIVE jack features 10 dB less gain. Use the GAIN control to determine the input gain on your BX3000T. Connect your footswitch to the FOOTSWITCH jack, so as to control the sub-harmonics processor and SHAPE filter. With the sub-harmonics processor switched on (see ) you can add ultra-low bass frequencies to your sound by turning the ULTRABASS control (see chapter 5). Press the ULTRABASS switch to enable the sub-harmonics processor: The LED above the switch lights up.

Fig. 2.3: BX3000T front panel (section 3) When you enable the SHAPE filter with switch , you can use the SHAPE control to modify the filter sound. The filter position is adjustable in the range from 120 Hz 1.2 kHz. The SHAPE switch activates the SHAPE filter. When the filter is on, the LED above the switch lights up. Use the OUTPUT control to determine the overall volume of your BX3000T. When the built-in limiter is activated, the LED below the OUTPUT control lights up. Connect the SEND/TUNER output to the input of your effects device, for example, our proven multi-effects processor BEHRINGER VIRTUALIZER PRO DSP2024P. This output can also be used to connect your tuner. Connect the RETURN jack to the output of your effects device. Since the BX3000T features a serial effects path, the mix ratio must be set on your effects device. Use the balanced D.I. XLR output to feed the audio signal from your ULTRABASS to an external mixing console. The D.I. signal is wired post-EQ. Use the LINE OUT jack to connect your BX3000T to a mixing console that has no balanced inputs and/or to provide a signal that is independent of all settings adjusted on the BX3000T. The LINE OUT output is wired post effects loop & and can also be used to feed the output signal of your BX3000T to an external bass amp.
Fig. 2.2: BX3000T front panel (section 2)

2.2 Rear panel

For correct speaker connection please also refer to chapters 3.3, 3.3.1 and 6.2.1!

3. WIRING EXAMPLES

This chapter is aimed at describing and illustrating basic wiring examples.
3.1 Standard setup comprising footswitch and one loudspeaker
The standard setup is intended for rehearsals, sessions and club gigs.
Fig. 2.4: BX3000T rear panel (section 1) Use the POWER switch to switch the BX3000T on or off. You should always make sure that the POWER switch is in the Off position when initially connecting the unit to the mains. To disconnect the unit from the mains, pull out the main cord plug. When installing the product, ensure that the plug is easily accessible. If mounting in a rack, ensure that the mains can be easily disconnected by a plug or by an all-pole disconnect switch on or near the rack. Please note: Merely switching the unit off does not mean that it is fully disconnected from the mains. When not using the unit for prolonged periods of time, please unplug the units power cord from the power outlet. MAINS CONNECTION. Use the power cord supplied with the unit to connect it to the mains. FUSE HOLDER/VOLTAGE SELECTOR. Before connecting the unit to the mains, make sure that the voltage setting matches your local voltage. A blown fuse should only be replaced by a fuse of the same type and rating. On some units, the fuse holder can be switched to one of two positions, i.e. 230 V and 120 V. When operating the unit outside Europe at 120 V, a higher fuse rating is required. SERIAL NUMBER. Please take the time to fill in and return the warranty card within 14 days after the date of purchase, so as to benefit from our extended warranty. Or register online at www.behringer.com. Fig. 3.1: Standard setup

3.2 Expanded setup with tuner and connection to a mixing console
The wiring scheme shown here builds on the standard setup.
Fig. 2.5: BX3000T rear panel (section 2) Use the SPEAKER outputs to connect your loudspeakers. The outputs are wired in parallel on two 1/4" jacks and a SPEAKON connector. Your speaker cabinets should have a sufficient power rating (>300 W) and preferably a total impedance of 4 W to avoid speaker damage. Too high a load impedance will decrease the output power rating of the power stage! Fig. 3.2: Expanded setup The output signal of your BX3000T can be taken directly at the XLR D.I. output and fed to a microphone input of your mixing console using a balanced microphone cable. Please ensure that phantom power is switched off on the respective channel of your mixer!
The D.I. output signal of your BX3000T is independent of the OUTPUT controls setting. However, it depends on all remaining settings and the effects loop. If you own a tuner that is able to loop through and mute the signal, we recommend connecting it to and. This allows you to the effects loop mute the output signal as long as you tune your instrument.
3.4 Connection of a multi-effects processor
Use the SEND/TUNER jack to connect the bass signal to a multi-effects device or a compressor. The output level is independent on the position of the OUTPUT control. The RETURN jack should be connected to the output of your effects device. If this jack is used for connection, the direct signal is interrupted automatically. The ratio between direct and effects signal has to be set on your effects device.
3.3 Connecting several loudspeakers
Needless to say, you can connect several loudspeakers (three at the most) to the speaker outputs of your BX3000T, which are wired in parallel. The figure below illustrates an example for such a connection.
Fig. 3.4: Connection of a multi-effects processor
3.5 Setup for master/slave operation
3.5.1 ULTRABASS BX3000T as master
The LINE OUT jack allows you to connect the BX3000T to an external power amp, using a commercial instrument cable equipped with mono phone plugs. The signal present here is independent on the position of the OUTPUT control. Fig. 3.3: Connection of two speaker cabinets
If several speakers are used in parallel, the total impedance should not drop below 4 W!
3.5.2 ULTRABASS BX3000T as slave controlled by an external amp/preamp

To use the power amp of your ULTRABASS for an external amp or preamp, you need to connect the line output of the external amplifier to the RETURN jack on your BX3000T. The connected signal can be taken at the D.I. output. Use the OUTPUT control to set the volume level.
3.3.1 Calculating the total impedance when connecting several loudspeakers
If several speakers are used in parallel, their total impedance can be calculated as follows:

4. SHAPE FUNCTION

The SHAPE function on your BX3000T provides a revolutionary type of filter that you can use to modify your bass sound in full detail. The filter allows you to shape your soundwhich is a must for bass players today. Extreme filter settings will give your bass sound more power, for example: You want to play a live bass solo but the sound doesnt cut through. The solo should stand out, rather than being drowned. Set up a solid basic sound plus a very distinctive solo sound using the SHAPE filter. Connect your footswitch to control the SHAPE filter.
E.g. this would allow two 8 loudspeakers.

. or 1 x 8 and 2 x 16 :

Please note that varying loudspeaker impedances result in different output power delivered to the individual speaker cabinets.
The SHAPE filter is a bargain when you are using two different bass guitars. Maybe you want to change from a jazz bass to a fretless bass, and vice versatwo instruments with a completely different sound. During gigs you often lack the time to set up your amp for a different instrument, so youll be happy to have a BX3000T, because you can use the SHAPE filter for your fretless sound, and the basic sound for the jazz bass.

5. ULTRABASS FUNCTION

Extremely low bass sounds playing one octave below the lowest available bass guitar frequency are quite trendy in current music productions. Often, you can do this in studios only, because most bass amplifiers have no sub-harmonics function. Not so with your BX3000T: the ULTRABASS processor gives you the ultimate tool to shape up-to-date sounds. Youll be surprised how deep your bass can sound with the ULTRABASS function of your BX3000T. Extreme settings can be particularly interesting if you want to give your sound some flavor in the treble range. By the way: when you use the SHAPE filter set to a low cut-off frequency (which is a nice setting for growling sounds), but feel that theres not enough power in the bass range, the sub-harmonics processor will be there to help you: even though the sound is still growling, now it has much more depth. The ULTRABASS function can easily be switched on and off via the supplied footswitch. This allows you to fine-tune certain passages only.

Fig. 6.3: XLR connectors

6. INSTALLATION
For rack mounting, please use M6 metal nuts and bolts.
Please ensure that only qualified personnel install and operate the BX3000T. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the unit.

6.1 Mains connection

The mains connection is made by using the enclosed mains cable and a standard IEC receptacle. It meets all of the international safety certification requirements.
6.2.1 Loudspeaker connections
In total, your BX3000T features three loudspeaker connectors.
Please make sure that all units have a proper ground connection. For your own safety, never remove or disable the ground conductor of the unit or of the AC power cable.
When connecting loudspeakers to the 1/4" jack connectors, please switch off the device first. Power up the unit again after all connections have been made.

6.2 Audio connections

The BEHRINGER ULTRABASS is equipped with mono phone jacks, except for the D.I. output which is on a balanced XLR connector. The speaker jacks are on 1/4" and SPEAKON connectors.
Please use the SPEAKON connector, if you want to connect one speaker cabinet only. For optimum output power delivered to the speaker(s), use your BX3000T in combination with one 4 or two 8 cabinets. Your BX3000T is equipped with high-quality NEUTRIK NL4MP SPEAKON connectors which ensure safe and trouble-free operation. The SPEAKON connector was especially developed for high-power loudspeakers. Once it is plugged in, it safely locks into its position and cannot be accidentaly disengaged. It prevents the occurrence of electrical shock and ensures the correct polarity.
Fig. 6.1: 1/4" TS connector Fig. 6.4: SPEAKON connector
Fig. 6.2: 1/4" TRS connector

7. SPECIFICATIONS

AUDIO INPUTS Active instrument input Input impedance Passive instrument input Input impedance Return Input impedance AUDIO OUTPUTS Send/Tuner Output impedance Line Out Output impedance Output level D.I. output Output impedance Output level Loudspeaker connectors Load impedance SYSTEM SPECIFICATIONS Power amp output POWER SUPPLY Mains voltages U.S./Canada 120 V~, 60 Hz Europe/U.K./Australia 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz General export model 120/230 V~, 50 - 60 Hz max. 490 W 100 - 120 V ~: T 12.6 A H 200 - 240 V ~: T 6.3 A H Standard IEC receptacle 300 Watts RMS into 4 1/4" mono jack, unbalanced min. 2.2 k unbalanced 1/4" mono jack, unbalanced approx. 100 unbalanced max. +4 dBu XLR connector, servo-balanced approx. 100 balanced max. -10 dBu 1/4" mono jack, unbalanced NEUTRIK NL4MP SPEAKON connector min. 4 1/4" mono jack, unbalanced approx. 220 k unbalanced 1/4" mono jack, unbalanced approx. 750 k unbalanced 1/4" mono jack, unbalanced approx. 10 k unbalanced
Power consumption Fuse Mains connection PHYSICAL/WEIGHT Dimensions (H x W x D) Weight
approx. 5 3/4" (144,6 mm) x 19 1/8" (486 mm) x 12" (305 mm) approx. 14 kg (30 7/8 lbs)
BEHRINGER constantly strives to maintain the highest quality standards. Modifications may be made, if necessary, without prior notice. The specifications and appearance of the equipment may therefore differ from those listed or illustrated.

8. WARRANTY

1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims. Based on the conditions herein, the buyer may also choose to use the online registration option via the Internet (www.behringer.com or www.behringer.de). 2 WARRANTY 1. BEHRINGER (BEHRINGER Spezielle Studiotechnik GmbH including all BEHRINGER subsidiaries listed on the enclosed page, except BEHRINGER Japan) warrants the mechanical and electronic components of this product to be free of defects in material and workmanship for a period of one (1) year* from the original date of purchase, in accordance with the warranty regulations described below. If the product shows any defects within the specified warranty period that are not excluded from this warranty as described under 4, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or reconditioned parts. In the case that other parts are used which constitute an improvement, BEHRINGER may, at its discretion, charge the customer for the additional cost of these parts. 2. If the warranty claim proves to be justified, the product will be returned to the user freight prepaid. 3. Warranty claims other than those indicated above are expressly excluded. 3 RETURN AUTHORIZATION NUMBER 1. To obtain warranty service, the buyer (or his authorized dealer) must call BEHRINGER (see enclosed list) during normal business hours BEFORE returning the product. All inquiries must be accompanied by a description of the problem. BEHRINGER will then issue a return authorization number. 2. Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by BEHRINGER. 3. Shipments without freight prepaid will not be accepted. 4 WARRANTY REGULATIONS 1. Warranty services will be furnished only if the product is accompanied by a copy of the original retail dealers invoice. Any product deemed eligible for repair or replacement under the terms of this warranty will be repaired or replaced. 2. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. The warranty does not cover any such modification/adaptation, irrespective of whether it was carried out properly or not. Under the terms of this warranty, BEHRINGER shall not be held responsible for any cost resulting from such a modification/adaptation. 3. Free inspections and maintenance/repair work are expressly excluded from this warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, tubes and similar parts. 4. Damages/defects caused by the following conditions are not covered by this warranty: s improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. s connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used. s damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. 5. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty. 6. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the inspection costs are payable by the customer. 7. Products which do not meet the terms of this warranty will be repaired exclusively at the buyers expense. BEHRINGER will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, BEHRINGER will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order. 5 WARRANTY TRANSFERABILITY This warranty is extended exclusively to the original buyer (customer of retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of BEHRINGER. 6 CLAIM FOR DAMAGES Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim (consequential) damages. In no event shall the liability of BEHRINGER exceed the invoiced value of the product. 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyers statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law. * Customers in the European Union please contact BEHRINGER Germany Support for further details.

The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER is a registered trademark. SPEAKON is a registered trademark of NEUTRIK with no connection whatsoever to BEHRINGER. ALL RIGHTS RESERVED. 2003 BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Mnchheide II, Germany Tel. +9206 0, Fax +9206 4903

doc1

ULTRABASS

BX3000T

ULTRABASS BX3000T

BEHRINGER
ULTRABASS BX3000T BX3000T BX BX1200
2.1 BX3000T LEVEL-VU BX3000T BX3000T (1)
BX3000T ACTIVE PASSIVE ACTIVE ACTIVE 10 dB GAIN 2 ULTRABASS 180 FOOTSWITCH SHAPE BX3000T

ULTRABASS LED

SEND/TUNER BEHRINGER VIRTUALIZER PRO DSP2024P RETURN BX3000T D.I.-XLR EQ LINE OUT GAIN OUTPUT EQ BX3000T ULTRABASS D.I.
2.2 BX3000T EQ DEEP DEEP LED BASS

MIDDLE

TREBLE BRIGHT

BRIGHT LED

2.4 : BX3000T POWER BX3000T

2.3 BX3000T SHAPE SHAPE

IEC SHAPE LED OUTPUT BX3000T 230 V V 120 V SHAPE
2.5 : BX3000T SPEAKER Neutrik Speakon

(2) 16 2

LINE OUT Neutrik Speakon

DI. 8 OUTPUT

2 BX3000T
Neutrik Speakon Speakon ULTRABASS Line RETURN BX3000T D.I. OUTPUT

SHAPE SHAPE

5. SHAPE
BX3000T ULTRABASS ULTRABASS BX3000T

7.3 XLR IEC

E-Bass E-Bass Return 6.3 mm 220 kW 6.3 mm 750 kW 6.3 mm 10 kW
BEHRINGER ULTRABASS D.I. 6.3 mm TS XLR Neutrik Speakon

Send/Tuner Line Out

6.3 mm min. 2.2 kW 6.3 mm 100 W max. +4 dBu XLR 100 W max. -10 dBu 6.3 mm Neutrik Speakon min. 4 W 4W

300 W RMS

120 V~ 7.1 6.3 mm
220 V~, 50 Hz 230 V~ 100 V~ 50 Hz Hz 60 Hz 250 V 250 V
120/230 V~ 50 max. 490 W V~: V~: IEC
5 3/4" (144.6 mm) x 19 1/8" (486 mm) x 12" (305 mm) 14 kg

6.3 mm

 

Tags

C4200DN Sony W220 3 1 Coolpix L15 ST-17 ESL620 Server 2 5 KV-80 Audioline 33 Numerique VCE-180 TM-H6000III WV-CP150 M3600 CTK-519 850 W Trackman 8830 PC If-ED A6500 SGH-F275L Zoom 4040 Dock 6000 EWT800 ICC20 Silver Evo3 Bass Amp Lantern 286A Yamaha RX15 ES-FG64 Zdts101 Street V3 VPC-C6EX SA-MT1 09 898C SI Touch 311 Attack-4 Probe 74229400 PLV-70 W2353V DR-MH200SE Price 400 ABS 700 PE TLU-42643B NX1101 Manual DIR-455 TX-SR604 Coolpix 600 Vyper GA-73PVM-s2 130SLT Doro 430 CT-21Q20EN G31T-M 42WM04ST DCR-TRV410E Wharton 4860 AP400 NAD 319 Sis761 Aspire 1710 LT-26DX7BJ Rcs-606h 490000 Canon XL1 SC-PM25 Auris CFD-E100 CDR570 VS-2400CD TCA 5400 Radio Head DE2654 ST-SE200 Deskjet 5160 CCD-TRV31E WD-1470FD 7100I DXZ715 Drive DCP-7040 Yamaha RX-7 Sharp 902 ESF6543 CD1351S-22 50PC1R Jensen UV9 HT-X70 1190 RC8 Dialtel 3031 BGW 750D LC-SM3 6240T SW KNA-G510 Optio M30 MC-E4013 T-mobile SDA

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101