ECHO MACHINE EM600

Thank you for showing your confidence in us by purchasing the BEHRINGER ECHO MACHINE EM600. This ultimate stereo Echo Modeler delivers the whole range of analog, tape and digital delay effects. Create any sound from vintage tape-based echo over warm analog BBD delay sound to clean high-fidelity digital delay.

1. CONTROLS

Top view The MIX knob is used for setting the level of the delays. The REPEAT knob determines the number of delays. The TIME control adjusts the delay time. The length of time depends on the selected program. The delay time indicates how fast the signal repetitions will follow after the original signal. Low settings allow to use the unit as a chorus or flanger. Alternatively, you can tap the tempo with the footswitch. Turning the control overrides tap tempo settings. With the MODE knob, you can select one of several delay modes:
The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator. Use the footswitch to activate/deactivate the effect. If you depress the pedal for more than two seconds, you are able to enter a tempo by tapping the pedal several times in time with the music. Depressing the pedal again for more than two seconds quits the tempo input mode. The 1/4" TS connectors (IN A/IN B) connect to your instrument. Use IN A for mono applications and both IN A and IN B if you have a stereo signal source, such as another effects unit. The two 1/4" TS connectors OUT A and OUT B send the signals to your amp. Use both connectors if you want to achieve a full stereo delay effect. For mono use simply plug in OUT A. With the MOD knob, you can add a nice modulation effect to your delays (TYPE switch position: ANALOG=Vibrato; DIGITAL=Chorus; TAPE= Wow and flutter). The TYPE switch allows you to choose from different classic delay characteristics, ranging from TAPE (delays with subtle high-frequency damping), DIGI (high-quality delays) to ANALOG (dark and slightly distorted delays). With the TRAILS switch, you can prevent delays from being cropped when bypassing the effect. Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
The EM600 has no On/Off switch. It is operable as soon as you insert a plug into one of the IN connectors. Disconnect the plug, if you dont use the EM600. In doing so, you can extend the life time of the battery. The SERIAL NUMBER is located at the underside. In rare cases interferences of the normal function may appear by external influence (e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application.

2. WARRANTY

For our current warranty terms, please refer to our website at http://www.behringer.com.

3. SPECIFICATIONS

IN A / IN B Connector Impedance OUT A / OUT B Connector Impedance Power supply BEHRINGER PSU-SB 1/4" TS 500 k 1/4" TS 1 k 9 V_, 100 mA regulated USA/Canada 120 V~, 60 Hz 220 V~, 50/60 Hz China/Korea Europe/U.K./Australia 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz Export model 120/230 V~, 50 - 60 Hz 2 mm DC jack, negative center 9 V type 6LRmA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0.33 kg (0.73 lbs)
Power connector Battery Power consumption Dimensions (H x W x D) Weight
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

4. SAFETY INSTRUCTIONS

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged. No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice slo accesorios y aditamentos autorizados. No intent reparar el producto usted mismo. Contacte a nuestro personal tcnico cualificado para servicio y reparaciones, especialmente cuando la fuente o el cable de alimentacin estn daados. . . . , .
Die deutsche Anleitung ist erhltlich @ www.behringer.com Manuel francophone en tlchargement sur www.behringer.com Manual en espaol disponible en www.behringer.com Manuali italiani disponibili @ www.behringer.com @ www.behringer.com Polska instrukcja dostpna jest pod adresem @ www.behringer.com Nederlandse handleiding beschikbaar @ www.behringer.com Suomenkielinen kyttohje saatavilla osoitteesta www.behringer.com Svensk manual finns tillgnglig p www.behringer.com Dansk vejledning findes p @ www.behringer.com Manual portugus disponvel @ www.behringer.com www.behringer.com
Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. Products are sold through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. ALL RIGHTS RESERVED. 2007 BEHRINGER International GmbH. BEHRINGER International GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Muenchheide II, Germany. Tel. +9206 0, Fax +9206 4903