EUROPOWER

Operating/Safety Instructions
IMPORTANT: Read this document before using this product. Want more information? See the back page of this booklet.

EPX2000 EPX3000

3000-WATT STEREO POWER AMPLIFIER

0 -10 -20

Instrucciones de seguridad/manejo
IMPORTANTES: Lea este documento antes de empezar a usar este aparato. Necesita ms informacin? Vea la contraportada.
Mode demploi/ Consignes de scurit
IMPORTANT : Lisez ce document avant dutiliser le produit. Pour de plus amples informations, veuillez consulter le dos de ce livret.

A50-A1X40-24001

www.behringer.com
EUROPOWER EPX2000/EPX3000 pg 2
EN EN Important Safety Instructions
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments/accessories specied by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. I
Este smbolo, siempre que aparece, le advierte sobre instrucciones operativas y de mantenimiento que aparecen en la documentacin adjunta. Por favor, lea el manual. Atencin Para reducir el riesgo de descarga elctrica, no quite la tapa (o la parte posterior). No hay piezas en el interior del equipo que puedan ser reparadas por el usuario. Si es necesario, pngase en contacto con personal cualicado. Atencin Para reducir el riesgo de incendio o descarga elctrica, no exponga este aparato a la lluvia, humedad o alguna otra fuente que pueda salpicar o derramar algn lquido sobre el aparato. No coloque ningn tipo de recipiente para lquidos sobre el aparato. Atencin Las instrucciones de servicio deben llevarlas a cabo exclusivamente personal cualicado. Para evitar el riesgo de una descarga elctrica, no realice reparaciones que no se encuentren descritas en el manual de operaciones. Las reparaciones deben ser realizadas exclusivamente por personal cualicado. 1. Lea las instrucciones. 2. Conserve estas instrucciones. 3. Preste atencin a todas las advertencias. 4. Siga todas las instrucciones. 5. No use este aparato cerca del agua. 6. Limpie este aparato con un pao seco. 7. No bloquee las aberturas de ventilacin. Instale el equipo de acuerdo con las instrucciones del fabricante.
Terminals marked with this symbol carry electrical current of sucient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with TS plugs pre-installed. All other installation or modication should be performed only by qualied personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sucient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualied personnel. Caution To reduce the risk of re or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects lled with liquids, such as vases, shall be placed on the apparatus. Caution These service instructions are for use by qualied service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualied service personnel. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. www.behringer.com

Technical specications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specications may vary slightly from product. Our products are sold through authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of Red Chip Company Ltd. ALL RIGHTS RESERVED. 2009 Red Chip Company Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands Las especicaciones tcnicas y apariencia del equipo estn sujetas a cambios sin previo aviso. La informacin aqu contenida es correcta hasta el momento de impresin. BEHRINGER no es responsable de la veracidad y/o exactitud de la informacin, descripciones e ilustraciones aqu contenidas. Los colores y especicaciones pueden variar ligeramente del producto. Los productos se venden exclusivamente a travs de nuestros distribuidores autorizados. Los distribuidores y comerciantes no actan en representacin de BEHRINGER y no tienen autorizacin alguna para vincular a BEHRINGER en ninguna declaracin o compromiso explcito o implcito. Este manual est protegido por el derecho de autor. La reproduccin total o parcial de su contenido, por cualquier medio electrnico o impreso, incluyendo fotocopias y cualquier otro tipo de registro, debe contar con la autorizacin expresa de Red Chip Company Ltd. ALL RIGHTS RESERVED. 2009 Red Chip Company Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands Caractristiques techniques et apparence susceptibles dtre modies sans notication pralable. Contenu exact lors de limpression. BEHRINGER dcline toute responsabilit concernant lexactitude et lintgrit des descriptions, illustrations et indications contenues ici. Les couleurs et spcications reprsentes peuvent tre lgrement direntes de celles du produit. Les produits sont vendus uniquement par nos revendeurs agrs. Les distributeurs et revendeurs ne sont pas des concessionnaires BEHRINGER. Par consquent, ils ne sont en aucun cas autoriss lier BEHRINGER par engagement ou reprsentation explicite ou implicite. Ce manuel est protg par copyright. Aucun extrait de ce manuel ne peut tre reproduit, transmis, photocopi ou enregistr de manire mcanique ou lectronique et quels quen soient le but, la forme et les moyens, sans la permission crite de Red Chip Company Ltd. ALL RIGHTS RESERVED. 2009 Red Chip Company Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands

500W Rear

520W Crossover

850W Limiter Type

900W Indicators
Connectors (each channel) Bridged Mono
8 / 20 Hz - 20 kHz @ 0.1% THD 8 / 1kHz @ 0.1% THD 4 / 20 Hz - 20 kHz @ 1% THD 4 / 1 kHz @ 1% THD Distortion Frequency Response (at 10db below rated output power) Damping Factor (1 kHz and below) Signal to Noise (20 Hz - 20 kHz) Voltage Gain Input Sensitivity
Active balanced XLR (pin 2+), " TRS RCA connectors Touch-proof binding posts/ twist-locking professional speaker connectors Continuously variable speed fan, back-to-front air ow

Input 1700W

1800W Output

Cooling

<0.01% 20Hz - 20kHz, +0/-1 dB 5Hz - 50kHz(at -3dB points)
<0.01% 20Hz - 20kHz, +0/-1 dB 5Hz - 50kHz(at -3dB points) Full short circuit, Full short circuit, open circuit, open circuit, thermal, ultrasonic, thermal, ultrasonic, RF protection. RF protection. Stable into reactive Stable into reactive or mismatched or mismatched loads loads On/o muting, DC- On/o muting, DCfault power supply fault power supply shutdown shutdown Class H, 2-tier Class H, 2-tier

Amplier Protection

>300 @ 8
>400 @ 8 Load Protection

>100 dB

>100 dB Output Circuitry
32dB 1V 10k ohms unbalanced / 20k ohms balanced

Power Consumption

1/8 Power (pink noise) Bridged 4ohms

5A_230V / 9A_120V

7A_230V / 12A_120V

Input Impedance

Fuse Rating
EU:10A250V/ UL:20A250V 19"/ 2U
EU:15A250V/ UL:30A250V 19"/ 2U
EUROPOWER EPX2000/EPX3000 pg 19
Especicaciones tcnicas del EUROPOWER EPX2000/EPX3000

MODELO:

Voltaje de entrada

Controles

Interruptor AC/ controles de ganancia para cada canal Interruptores MONO, X-Over, Limiter y BRIDGE MODE FX 100 Hz, pendiente 12 dB Limitador CLIP VCA, conmutable Encendido: piloto azul/por canal > Seal piloto verde: -20 dB, -10 dB/ amarillo: 0 dB/ Clip: rojo

Panel frontal

Modo stereo (ambos canales reciben seal)

Panel trasero

Crossover o divisor de frecuencias

850 W Tipo de limitador

1400 W

Indicadores

Otros aspectos importantes
Autres informations importantes
EUROPOWER EPX2000/EPX3000 pg 23

Warranty

1 Other warranty rights and national law
[1] This warranty does not exclude or limit the buyers statutory rights provided by
national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. [2] The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law.
[2] If the product needs to be modied or adapted in order to comply with applicable
technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modication/adaptation shall not be considered a defect in materials or workmanship. The warranty does not cover any such modication/adaptation, irrespective of whether it was carried out properly or not. Under the terms of this warranty, BEHRINGER shall not be held responsible for any cost resulting from such a modication/adaptation. Free inspections and maintenance/repair work are expressly excluded from this warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar strings, illuminants and similar parts. Damage/defects caused by the following conditions are not covered by this warranty: improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; damage/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the inspection costs are payable by the customer. Products which do not meet the terms of this warranty will be repaired exclusively at the buyers expense. BEHRINGER will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notication, BEHRINGER will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order.

2 Online registration

Please do remember to register your new BEHRINGER equipment right after your purchase by visiting http://www.behringer.com and kindly read the terms and conditions of our warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more efciently. Thank you for your cooperation!

3 Warranty

[1] BEHRINGER (BEHRINGER International GmbH including all BEHRINGER
subsidiaries, except BEHRINGER Japan) warrants the mechanical and electronic components of this product to be free of defects in material and workmanship for a period of one (1) year* from the original date of purchase, in accordance with the warranty regulations described below. If the product shows any defects within the specied warranty period that are not excluded from this warranty as described under 5, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or reconditioned parts. In the case that other parts are used which constitute an improvement, BEHRINGER may, at its discretion, charge the customer for the additional cost of these parts. [2] If the warranty claim proves to be justied, the product will be returned to the user freight prepaid. [3] Warranty claims other than those indicated above are expressly excluded.

[5] [6] [7]

4 Return authorization number 6 Warranty transferability
[1] To obtain warranty service, the buyer (or his authorized dealer) must call
BEHRINGER during normal business hours BEFORE returning the product. All inquiries must be accompanied by a description of the problem. BEHRINGER will then issue a return authorization number. [2] Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by BEHRINGER. [3] Shipments without freight prepaid will not be accepted. This warranty is extended exclusively to the original buyer (customer of retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of BEHRINGER.

7 Claim for damage

Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim (consequential) damages. In no event shall the liability of BEHRINGER exceed the invoiced value of the product.

5 Warranty regulations

[1] Warranty services will be furnished only if the product is accompanied by a copy
of the original retail dealers invoice. Any product deemed eligible for repair or replacement under the terms of this warranty will be repaired or replaced.

Customers in the European Union please contact BEHRINGER Germany Support for further details.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible party name: Address: MUSIC Group Services USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +Fax: +673 7647

Phone/Fax No.:

complies with the FCC rules as mentioned in the followingparagraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician forhelp. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important information: Changes or modifications to the equipment not expressly approved by MUSIC Group can void the users authority to use the equipment.

behringer.com

Do you want more information about this product?
We oer expanded Owners Manuals in PDF format for the advanced user at www.behringer.com. Downloads are available in English, Spanish, German and Chinese.
Necesita ms informacin sobre este producto?
Para aquellos usuarios ms avanzados que necesiten ms informacin, encontrarn un manual de instrucciones ampliado en formato PDF en nuestra pgina web www.behringer.com. Estos manuales estn disponibles en ingls, espaol, alemn y chino.
Souhaitez-vous de plus amples informations sur ce produit ?
Vous trouverez une version plus longue de ce mode demploi en anglais, en espagnol, en allemand et en chinois au format PDF sur le site www.behringer.com.

PA Amplifiers

EUROPOWER EPX2000/EPX3000
EUROPOWER Professional 3000/2000-Watt Light Weight Stereo Power Amplifiers with ATR (Accelerated Transient Response) Technology EPX3000: 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) EPX2000: 2 x 1000 Watts into 2 Ohms; 2 x 650 Watts into 4 Ohms; 2000 Watts into 4 Ohms (bridge mode) ATR (Accelerated Transient Response) technology for ultimate punch and clarity Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption Switchable limiters offer maximum output level with reliable overload protection Detented gain controls for precise setting and matching of sensitivity Precise Power, Signal and Clip LEDs to monitor performance XLR, " TRS and RCA input connectors for compatibility with any source Professional speaker connectors and touch-proof binding posts support most speaker wiring systems Built-in Subwoofer/Satellite crossover for more flexibility
Ultra-light, built on a legacy Power amps have always been heavy, mainly because of the massive transformers and huge banks of capacitors needed for high-power operation. In fact, six conventional power amps in a rack can easily top 250 pounds. The same number of EPX Series amps come in at just under 134 lbs / 61 kg, and they pack all the power of their conventional counterparts! In a class of their own The secret to the EPX series incredible power-to-weight ratio is their use of a switching-mode power supply combined with Class-H topology. Switching-mode power supplies work on demand. Instead of constantly working at full power and dissipating excess power as heat, they only ramp up the power output when neededthousands of times per
second. Considerably more efficient than traditional power supplies, switchingmode power supplies are small and light, yet deliver ample power. Think of a Class H amp as a car with two engines (in amps, you call them rails). One engine runs all the time. The other runs only when musical peaks demand extra power output. An EPX Class H amp only generates a fraction more power than is immediately needed while the output stage operates at its maximum efficiency all the time. And just like in today's hybrid cars, the efficiency of this dual system is far greater than having one engine or rail that must operate all the time. EPX amps dont waste power. Class H amps dont waste power, require much smaller heat sinks and much lighter power transformers.

Continued on next page

Page 2 of 5
Accelerated Transient Response delivers the knock-out punch
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show Back-to-front ventilation system including air filter for reliable operation Built-like-a-tank, impact-resistant, all-steel 2U rackmount chassis High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. Thats called Transient Response and its the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound. Instead of operating relatively continuously like Class AB circuits, Class H amps, which were first described in NASA technology (U.S. patent 3,319,175), feature
rail tracking for effectively modulating the power supply rails with only the peaks of the input signal. This technology has revolutionized pro audio amp designs with its outstanding performance and efficiency. When combined with switching-mode power supplies that replace heavy toroid transformers, our new designs provide more dynamic punch and, because they are so much more efficient, run cooler and dont require huge, heavy heat sinks. BEHRINGER didnt invent Class H technology, but our R&D Department has been working for years to perfect our own version, creating lightweight amps that run cool and also achieve our goal of Accelerated Transient Response.

Front Panel

Detented channel GAIN controls Power Switch

0 -10 -20

3000-WATT STEREO POWER AMPLIFIER
Signal level LED meter with clipping LED

Ventilation openings

Rear Panel
Built-in CROSSOVER switch dedicated 100 Hz CH1/CH2 or FULLRANGE MODE switch mono/ stereo/ bridge

IEC power socket

Professional locking speaker connections
Touch-proof binding posts speaker outputs

Cooling fans

INPUT accepts balanced XLR, " TRS, and unbalanced 1 /4" TS and RCA connections

LIMITER on/off switch

Page 3 of 5
Everything you need, nothing you don't The simple front panel controls of these amps give you all of your sounds vital signs at a glance. After pressing the Power Button, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input. Panel discussion The EPX series INPUTs accept balanced XLR, " TRS, and unbalanced " TS and RCA connections. Take your pick of professional locking speaker outputs or touch-proof binding posts to securely connect speakers. A panel of switches found on the back offers an array of cool options applicable to both channels. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the amp is being overdriven into clipping and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so its an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you're feeling lucky. The same panel contains the switches that allow you to put these amps to work in either mono, stereo (two-channel mode) or bridge mode, which is always in mono. A built-in CROSSOVER switch lets you select the point at which highs and lows are separated (CH1<100Hz / CH2>100 Hz or FULLRANGE). BEHRINGERs EPX line is built for the working musician. Its much easier to transport than a conventional AB power amp, it packs ample power, its got a built-in crossover and limiter, and its built to last through all the rigors of the road. Plus its light price tag will leave you with enough cash left over to acquire more stuff to amplify! Check out an EPX and find out why BEHRINGER power amps are among the most popular on Earth.

Mono Out

Stereo Mode
SX2442FX Mixing Console EUROLIVE B1520 PRO Full range loudspeaker

R Stereo Out L

Input Channel 1
EUROPOWER EPX3000 (STEREO MODE)

Input Channel 2

Mono Mode
EUROPOWER EPX3000 (MONO MODE)

-10 -20

Page 4 of 5

Biamp Mode

Mixing Console SX2442FX

Stereo Out

EUROLIVE B1800X-PRO Subwoofer EUROLIVE B1520 PRO Full range loudspeaker EUROLIVE B1520 PRO Full range loudspeaker
EUROLIVE B1800X-PRO Subwoofer

Page 5 of 5

OUTPUT POWER RMS Power Stereo Mode (both channels driven)

EPX2000/EPX3000

Input Sensitivity 1V
Circuit protection Cooling Continuously variable speed fan,back to front air flow Full short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
Distortion 350 W 600 W 1000 W <0.01%

EPX2000

8 / 1 kHz @ 0.1% THD 4 / 1 kHz @ 0.1% THD 2 / 1 kHz @ 1% THD
Frequency Response 20 Hz - 20 kHz, +0/-1 dB

Amplifier protection

Voltage Gain 35 dB

EPX3000

8 / 1 kHz @ 0.1% THD 4 / 1 kHz @ 0.1% THD 2 / 1 kHz @ 1% THD Bridged Mono 550 W 900 W 1500 W
Damping Factor > 300 @ 8
Output circuit type POWER SUPPLY / VOLTAGE (FUSES) Class H
Input impedance 10 k unbalanced, 20 k balanced
USA / Canada UK / Australia 120 V~, 60 Hz (T 20 A H 250 V) 240 V~, 50 Hz (T 10A H 250 V) 230 V~, 50 Hz (T 10 A H 250 V) 100 V~, 50-60 Hz (T 20 A H 250 V) 3000 W Standard IEC receptacle
8 / 1 kHz @ 0.1% THD 4 / 1 kHz @ 1% THD 1250 W 2000 W
Signal-to-Noise > 100 dBA
8 / 1 kHz @ 0.1% THD 4 / 1 kHz @ 1% THD PEAK POWER 1800 W 3000 W
Controls Front Rear POWER switch GAIN control (channel 1 and 2) MODE switch X-over Switch, BRIDGE MODE switch
Europe Japan Power consumption Mains connector
Stereo Mode (both channels driven)
8 / 1 kHz 4 / 1 kHz 2 / 1 kHz 400 W 800 W 1450 W
Indicators POWER CLIP (per channel) PROT (per channel) SIGNAL (per channel) -20dB~-10dB SIGNAL (per channel) -10dB~ 0dB Blue LEDs Blue LEDs Blue LEDs White LEDs White LEDs
USA / Canada UK / Australia (T 15A H 250 V) Europe Japan Power consumption Mains connector 120 V~, 60 Hz (T 30 A H 250 V) 240 V~, 50 Hz 230 V~, 50 Hz (T 15 A H 250 V) 100 V~, 50-60 Hz (T 30 A H 250 V) 4500W Standard IEC receptacle
8 / 1 kHz 4 / 1 kHz 2 / 1 kHz Bridged Mono 650 W 1150 W 2100 W
Connectors Inputs Outputs Balanced XLR, " TRS , RCA Speakon and touch-proof binding posts
8 / 1 kHz 4 / 1 kHz 1650 W 2900 W

DIMENSIONS/WEIGHT Dimensions (H x W x D) Weight
Please note these specifications are preliminary and conceptual in nature, and as such are subject to change as product development progresses. This information is supplied for market research purposes only and is not to be made public in any manner. This document is solely the property of The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner.
8 / 1 kHz 4 / 1 kHz 2250 W 4000 W
For service, support or more information contact the BEHRINGER location nearest you: Europe Tel.: +Singapore Tel.: +1800 Fax: +Fax: +0275 USA/Canada Tel.: +Australia Tel.: +Fax: +Fax: +9877 7870

Tel.: +Fax: +5281 1181

2011 Red Chip Company Ltd. Technical specications and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00408