HELL-BABE HB01

Thank you for showing your confidence in us by purchasing the BEHRINGER HELL-BABE HB01. This professional Wah-Wah pedal is specially designed to provide everything you need for all-style classic and modern sounds. Thanks to its high-performance features like flexible Q control, freely adjustable heel-down frequency range (perfect for use with bass guitars), tunable boost function and much more youre armed with a tool for serious musicians yearning for the most up-to-date sounds to add new dimensions to their creativity. WHERE TO PUT YOUR WAH-WAH Most guitar players put their Wah-Wah pedal before time based effects like reverb, flanger, chorus, vibrato etc. This assures that the effects are added to the Wah-Wah sound. Even all kinds of distortion/overdrive effects should be placed before this unit to achieve best tone results.

1. CONTROLS

This is the pedal of the HB01. The unit will be activated as soon as you put your foot on and move it. By taking your foot from the pedal the effect will be deactivated. Depending on the timer adjustment (see ) the HB01 remains active for a few seconds after that. The RANGE control lets you extend the heel-down frequency to match the frequency range of bass guitars for example (440 Hz to 250 Hz). The BOOST switch activates the boost function. The output level is then increasedbut only if the Wah effect is switched on. The BOOST control adjusts the level of output boost (max. +15 dB). This control is only active if the BOOST switch is set to ON (and if the Wah is switched on). The Q control allows to change the shape of the filter peak. High Q settings (turned to right position) produce a large, selective filter peak with a high output level. Low Q settings (turned to left position) provide a lower output level with a subtle, broad filter peak producing less vocal effect. Turning the FINE control allows to extend the toe-down frequency of the sweep range up to 2.2 kHz. Use this 1/4" TS IN connector to plug in the instrument cable. The 1/4" TS OUT connector sends the effected signal to your amp. The 1/4" TS OUT/BYPASS connector can be used as second output or as bypass, hard wired to the input, to play out the uneffected signal. The TIMER ADJ control (accessable through a hole in the housing) is needed to adjust the time the effect remains active after taking your foot from the pedal. Use the 9 V connection to plug in a 9 V power supply (not included). The STATUS-LED illuminates when the effect is activated. The BOOST-LED illuminates when the boost function is activated. The rocker screw allows to adjust the resistance of the rocker mechanism. The BATTERY COMPARTMENT is located at the bottom of the unit. Open the lid to install or replace the 9 V battery. The HB01 has no on/off switch. As soon as you insert the jack into the IN connector, the HB01 begins running. When not using the HB01, remove the jack from the IN connector. This extends the life of the battery. The SERIAL NUMBER is located at the bottom of the unit.

2. WARRANTY

For our current warranty terms, please refer to our website at http://www.behringer.com.
Input Connector Impedance Output Connector Impedance Output/Bypass Connector Impedance Power supply 1/4" TS 1 k 1/4" TS 1 M

3. SPECIFICATIONS

Power connector Battery Power consumption Dimensions (H x W x D) Weight
1/4" TS 1 k 9 V, 100 mA DC regulated PSU-SB-CN BEHRINGER 220 VAC adaptor China PSU-SB-EU BEHRINGER 230 VAC adaptor Europe PSU-SB-JP BEHRINGER 100 VAC adaptor Japan PSU-SB-SAA BEHRINGER 240 VAC adaptor Australia PSU-SB-UK BEHRINGER 240 VAC adaptor UK PSU-SB-UL BEHRINGER 120 VAC adaptor USA 2 mm DC jack, negative center 9 V type 6LRmA approx. 99 mm (3 9/10") x 120 mm (4 3/4") x 254 mm (10") approx. 0.46 kg (1.01 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

Die deutsche Anleitung ist erhltlich @ www.behringer.com Manuel francophone en tlchargement sur www.behringer.com Manual en espaol disponible en www.behringer.com Manuali italiani disponibili @ www.behringer.com @ www.behringer.com Polska instrukcja dostpna jest pod adresem @ www.behringer.com Nederlandse handleiding beschikbaar @ www.behringer.com Suomenkielinen kyttohje saatavilla osoitteesta www.behringer.com Svensk manual finns tillgnglig p www.behringer.com Dansk vejledning findes p @ www.behringer.com Manual portugus disponvel @ www.behringer.com www.behringer.com
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER is a registered trademark. ALL RIGHTS RESERVED. 2005 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Mnchheide II, Germany. Tel. +9206 0, Fax +9206 4903