User Manual

EUROPOWER PMP960M/PMP980S/ PMP1280S
900/1,200-Watt 6/10-Channel Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System

Thank you

Thank you for choosing one of the PMP series powered mixers from BEHRINGER. These mixers pack impressive features such as digital effects, graphic EQs, FBQ feedback destroyer and unique voice cancelling function all in a lightweight, portable package. You now have a versatile combination of inputs, routing options, effects and power amp operations for your rehearsal space, small venue or portable PA needs. But why bother with manuals? We know you want to get started right away, but please read this manual carefully and keep it handy for ongoing reference. These instructions show you all the inside features, tricks, and tips you need to build the best possible sound with your new PMP powered mixer. After all, its all about your sound.

Table of Contents

Thank you... 1 Important Safety Instructions. 2 1. Before you get started.. 3 2. Control Elements... 3 3. Digital Effects Processor... 6 4. Installation... 6 5. Wiring Examples.. 9 6. Specifications.. 11 Legal Disclaimer.. 13 Waranty... 14
This manual is available in English, German, French, Spanish, Italian, Russian, Polish, Dutch, Finnish, Swedish, Danish, Portugese, Greek, Japanese and Chinese. There may also be more current versions of this document. Download them by going to the appropriate product page at:

www.behringer.com

XXX-XXXXX-XXXXX

ENGLISH

EUROPOWER PMP960M/PMP980S/PMP1280S User Manual
Important Safety Instructions
[6] Clean only with dry cloth. [7] not block any ventilation openings. Install in accordance Do
with the manufacturers instructions.
[8] not install near any heat sources such as radiators, heat Do

* * ! ! ! !

registers, stoves, or other apparatus (including amplifiers) that produce heat.
[9] not defeat the safety purpose of the polarized or Do
grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Terminals marked with this symbol carry electrical current of sucient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with " TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
{10} Place the power cord so that it is protected from being walked
on and sharp edges. Be sure that the power cord is protected particularly at plugs, convenience receptacles and the point where it exits from the apparatus.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sucient to constitute a risk of shock.
{11} apparatus shall be connected to a MAINS socket outlet The
with a protective earthing connection.
{12} Where the MAINS plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain readily operable.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
{13} use attachments/accessories specified by the Only

manufacturer.

{14} only with the cart, stand, tripod, bracket, Use

Caution

To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
{15} Unplug this apparatus during lightning
storms or when unused for long periods of time.
{16} Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
[1] these instructions. Read [2] Keep these instructions. [3] Heed all warnings. [4] Follow all instructions. [5] not use this apparatus near water. Do
1. Before you get started

1.1 Shipment

Your PMP mixer was carefully packed at the factory and the packaging is designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage which may have occurred during transit. If the unit is damaged, please do NOT return it to BEHRINGER, but notify your dealer and the shipping company immediately. Otherwise, claims for damage or replacement may not be granted. We recommend that you use a flight case, so as to give your power mixer optimum protection during use or transport. Always use the original packing carton to prevent damage during storage or transport. Make sure that children cannot play unsupervised with the device or its packaging. Please ensure proper disposal of all packing materials.

1.3 Online registration

Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (www.behringer.com). Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation!

range.
[14] List of all multi-effects presets. [15] LED level meter of the effects processor. Since the PMP980S/
channel in the monitor mix.
channel to the built-in effects processor; this signal is also present at the FX OUT jack (see (32)). The PMP980S/ PMP1280S has two FX controls (FX 1 and FX 2), so that you can use two effects simulteneously. Accordingly, it also provides two effect Aux paths (see (32)). Please note that the effects processor signal will be inaudible when the FX RETURN control (21) is set fully counter-clockwise. [6] For the mono input channels, the PMP980S/PMP1280S has a PAN(ORAMA) control which determines the position of the channel signal in the stereo main mix. The PMP960M has no PAN on the input channels, because it is a dualmono power mixer. [7] The BAL(ANCE) control for the stereo channels of the PMP980S/PMP1280S corresonds to the PAN control for the mono channels. It determines the relative volume of the left and right input signals before they are routed to the stereo main output. The PMP960M has no stereo channels and hence no BAL control, because it is a dual-mono power mixer. [8] The LEVEL control adjusts the channel signal level in the main mix.
PMP1280S allows you to select two effects simultaneously, it also has two level meters (DUAL FX). Be sure that the clip LED illuminates for signal peaks only. If it is illuminated all the time, it is a sign that the effects processor is overloading and hence producing unpleasant distortion. [16] The Effect display (PMP980S/PMP1280S: two displays) shows the currently selected preset. [17] Turn the PROGRAM control (PMP980S/PMP1280S: one control each for FX 1 and FX 2) to select an effects preset (preset number starts flashing). Push the control briefly to confirm your selection. [18] Press the FX IN button (PMP980S/PMP1280S: FX 1 IN and FX 2 IN) to activate the effects processor.
2.3 Main and monitor section
[19] Your power mixer is equipped with two graphic 7-band

2.1.1 Input section

[9] The CLIP LED is very useful to control the input gain. It
should never be constantly illuminated (only with signal peaks). [10] The PAD switch reduces the input sensitivity of the channel by approx. 30 dB, to connect for example line-level signals. [11] The balanced HI-Z input (" TRS) can be used for line-level signal sources, e.g. keyboards, electric guitars and basses.

[22] [23]

equalizers. The upper one processes the monitor signal, the lower one the main signal. Use the EQs to adjust the sound to the room acoustics. Press the FBQ IN switch to activate the FBQ Feedback Detection System. The frequencies causing feedback are shown by the brightly lit fader LEDs. Simply lower the level of the respective frequency range until feedback disappears and the LED goes out. Your power mixer offers this function both for the main and the monitor mix. Turn the FX RET control to add the effect signal to the main mix (lower) or monitor mix (upper). The PMP980S/ PMP1280S allows you to use two effects at the same time, it also has two FX controls each for the main and monitor mixes: when the FX RET 1 and FX RET 2 controls are fully counterclockwise, no effect signal is added. The CD/TAPE IN control adjusts the volume of the 2 Track In signal (see (35)). The MONITOR MASTER control adjusts the monitor output volume.

[24] Use this 5-digit LED meter to control the output level of the
[30] If STANDBY is pressed, all input channels are muted.
monitor signal. The upper LIM LED illuminates when the internal amp protection circuit responds to output levels that are too high. [25] The MAIN MASTER control is used to adjust the main output volume. [26] Use this 5-digit LED meter to control the output level of the main signal. The PMP980S/PMP1280S has two rows of LED meters (L/R), because the signal is stereo. The upper LIM LED illuminates when the internal amp protection circuit responds to output levels that are too high. [27] +48V phantom power is provided for condenser microphones. The phantom power supply is activated for all channels with the PHANTOM switch and the PHANTOM LED above the switch illuminates. [28] Use the POWER AMP switch to determine the operating mode of your power mixer. The PMP980S/PMP1280S has three different operating modes: In MAIN L/MAIN R mode it functions as a stereo amplifier, i.e. the left and right main stereo signals are sent to OUTPUT A (L) and OUTPUT B (R). In MON/MONO mode it functions as a dual mono amplifier, i. e. OUTPUT A sends the monitor signal, and OUTPUT B the main signal (mono). In BRIDGE AMP MODE the output power of outputs A and B are added and provided at OUTPUT B. The PMP960M also has three operating modes, since it can be operated in two modes with the switch in its upper position (MAIN/MAIN (BRIDGE) mode), depending on the pin connections of the speaker cables. In MAIN/MAIN (BRIDGE) mode power of both outputs is added and provided at OUTPUT B (Locking cable, pins 1+/2+). With the normal pin connections (Locking cable, pins 1+/1-) a main signal is provided in this mode at OUTPUT A and B (not bridged). In MON/MAIN mode, the mixer can also be used as a dual mono amplifier, i.e. OUTPUT A provides the monitor signal, while the main signal is present at OUTPUT B. Please refer to (44) and (45) as well as chapter 4.4 Loudspeaker connectors. In BRIDGE mode, always connect only one loudspeaker with an impedance of at least 8 to OUTPUT B (pins 1+/2+)! Please note that OUTPUT A must NEVER be used in BRIDGE mode (with pin connections 1+/2+)! In all other operating modes, the minimum impedance of the speaker connected must not fall below 4. [29] Use the SPEAKER PROCESSING switch to activate a filter that adapts the mixer to the specifications of your loudspeakers. If the speakers have a limited frequency response in the bass range, it allows you to adapt it optimally to the frequency response of the speakers.
During breaks you can thus prevent the microphones from picking up noise or interference, which would then be reproduced by the P.A. system. The advantage is that all faders can be left untouched while you play a CD via the CD/TAPE inputs (see (35)). There is also no need to move down the faders of muted channels and lose your mix.

OUTPUT B. PMP960M: Either the main or the bridged main mono signal is provided at OUTPUT B (see (28)). When you use a cable with the normal pin connections (pins 1+/1-), it is possible in MAIN/MAIN (BRIDGE) mode to take the mono main signal from this output (not bridged). Please also refer to chapter 4.3 Loudspeaker connection. In BRIDGE mode, always connect only one loudspeaker with an impedance of at least 8 to OUTPUT B (pins 1+/2+)! Please note that OUTPUT A must NEVER be used in BRIDGE mode (with pin connections 1+/2+)! In all other operating modes, the minimum impedance of the speaker connected must not fall below 4. Information on how to properly connect your speaker with regard to polarity can be found on the rear of the mixer (PINOUTs). [45] SERIAL NUMBER.

2.4 Rear panel

3. Digital Effects Processor
24-BIT MULTI-EFFECTS PROCESSOR
This built-in effects module produces high-grade standard effects such as reverb, chorus, flanger, delay and various combination effects. The integrated effects module has the advantage of requiring no wiring. This way, the danger of creating ground loops or uneven signal levels is eliminated at the outset, completely simplifying the handling. These effect presets are designed to be added to dry signals. If you move the FX RET control, you mix the channel signal (dry) and the effect signal. Turn down the FX controls in those channel strips whose signals you dont wish to process.
[41] The mains connection is on a standard IEC receptacle. An [42] FUSE HOLDER. Before connecting the unit to the mains,
appropriate power cord is supplied with the unit.
ensure that the voltage setting matches your local voltage. Blown fuses should only be replaced by fuses of the same type and rating. Please also read the information given in chapter 6 Specifications. [43] Loudspeaker OUTPUT A. PMP980S/PMP1280S: Depending on the operating mode selected (see (28)) either the left main signal or the monitor signal is provided at OUTPUT A. Never use this output in bridged mono mode. PMP960M: In MON/MAIN mode, the monitor signal is provided at OUTPUT A (see (28)). Never use this output in bridged mono mode, except when you use a cable with the normal pin connections (pins 1+/1-). In this case you can take the mono main signal from this output in MAIN/ MAIN (BRIDGE) mode (not bridged). Please also refer to chapter 4.3 Loudspeaker connection. The impedance of the loudspeaker connected must not fall below 4. Please note that the power delivered to the speaker in bridged mono mode is considerably higher than in other operating modes. Please read the information given on the rear panel of the power mixer. [44] Loudspeaker OUTPUT B. PMP980S/PMP1280S: Depending on the operating mode selected (see (28)) either the right main signal, the mono main signal or the bridged mono signal is provided at

4. Installation

4.1 Mains connection
Blown fuses must be replaced by fuses of the same type and rating. The mains connection is made using the enclosed power cord and a standard IEC receptacle. It meets all of the international safety certification requirements. Please make sure that all units have a proper ground connection. For your own safety, never remove or disable the ground conductor from the unit or of the AC power cord.

4.2 Audio connections

The inputs and outputs of the BEHRINGER EUROPOWER are unbalanced " TS connectorsexcept for the balanced mono line inputs. Of course, all inputs and outputs work with both bal-
anced and unbalanced connectors. The Tape Ins and Outs are on stereo RCA connectors. Please ensure that only qualified personnel install and operate the power mixer. During installation and operation, the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the unit.
Strain relief clamp Sleeve Tip
1 = ground/shield 2 = hot (+ve) 3 = cold (-ve) output
For unbalanced use, pin 1 and pin 3 have to be bridged

Sleeve (ground/shield)

Balanced use with XLR connectors

Tip (signal)

Fig. 4.3: XLR connectors

Unbalanced TS connector

strain relief clamp sleeve
Fig. 4.1: " TS connector
strain relief clamp sleeve ring tip

sleeve pole 1/ground

sleeve ground/shield

tip pole 2

The footswitch connects both poles momentarily
ring cold (-ve) tip hot (+ve)
For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug.
1/ TS footswitch connector 4"
Fig. 4.4: " TS connector for footswitch
Balanced 1/ TRS connector 4"
Fig. 4.2: " TRS connector
EUROPOWER PMP960M/PMP980S/PMP1280S User Manual Please use a dual footswitch for the PMP980S/PMP1280S, so that you can enable/disable FX1 and FX2 independently of each other. In this case, the tip of the " plug controls FX1, and the ring FX2. Please be sure to only use professional locking-style speaker cables (type NL4FC). Please check the pin connections of your loudspeakers and cables depending on the EUROPOWER speaker output you choose.

MICROPHONE INPUTS
Type Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ohm source resistance @ 50 Ohm source resistance @ 150 Ohm source resistance Frequency response Gain Max. input level Impedance Signal-to-noise ratio Noise (THD + N) XLR, electronically balanced input circuit -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted < 10 Hz - 200 kHz (-1 dB) < 10 Hz - > 200 kHz (-3 dB) +30 dB, +10 dB with pad +12 dBu @ +10 dB gain approx. 2.2 kOhm balanced / 1.1 kOhm unbalanced 110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain) 0.001% / 0.0007% A-weighted " TS connectors, balanced approx. 20 kOhm, balanced +21 dBu

PREAMP OUTPUTS

MAIN Type Impedance Max. output level MONITOR Type Impedance Max. output level " TS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu " TS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu

STEREO OUTPUTS

PMP960M Type Impedance Max. input level PMP980S Type Impedance Max. input level PMP1280S Type Impedance Max. input level PMP960M Type Impedance Max. input level PMP980S Type Impedance Max. input level PMP1280S Type Impedance Max. input level " TRS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu " TRS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu RCA, mono output approx. 1 kOhm +21 dBu RCA approx. 1 kOhm +21 dBu RCA approx. 1 kOhm +21 dBu

MONO LINE INPUTS

Type Impedance Max. input level

STEREO LINE INPUTS

PMP960M Type Impedance Max. input level PMP980S Type Impedance Max. input level PMP1280S Type Impedance Max. input level " TRS connectors, unbalanced approx. 100 kOhm, unbalanced +21 dBu " TRS connectors, unbalanced approx. 100 kOhm, unbalanced +21 dBu 80 Hz / +/-15 dB 2.5 kHz / +/-15 dB 12 kHz / +/-15 dB RCA approx. 10 kOhm

EQUALIZER

Low Mid High

MAIN MIX SYSTEM DATA

Noise: MAIN MIX @ -? Channel fader -? MAIN MIX @ 0 dB Channel fader -? MAIN MIX @ 0 dB Channel fader @ 0 dB

CD/TAPE INPUT

Type Impedance
-102 dB/-106 dB A-weighted -88 dB/-91 dB A-weighted -84 dB/-86 dB A-weighted
EUROPOWER PMP960M/PMP980S/PMP1280S User Manual LOUDSPEAKER OUTPUTS Type Load impedance: PMP960M MAIN L/R PMP980S MAIN L/R PMP1280S MAIN L/R PMP960M MONITOR/MAIN MONO MAIN MONO/MAIN MONO BRIDGE PMP980S MONITOR/MAIN MONO MAIN MONO/MAIN MONO BRIDGE PMP1280S MONITOR/MAIN MONO MAIN MONO/MAIN MONO BRIDGE 4 - 8 Ohm 4 - 8 Ohm 4 - 8 Ohm 4 - 8 Ohm 8 - 16 Ohm 4 - 8 Ohm 4 - 8 Ohm 8 - 16 Ohm 4 - 8 Ohm 4 - 8 Ohm 8 - 16 Ohm 24-bit Delta-Sigma, 64/128-times oversampling 90 dB 40 kHz max. 5 secs approx. 1.5 ms PMP960M 4 Ohm per channel PMP980S 4 Ohm per channel PMP1280S 4 Ohm per channel
Professional twist-lock style connector

250 W 250 W 450 W

RMS @ 1% THD (sine wave), bridged mode: PMP960M 8 Ohm PMP980S 8 Ohm PMP1280S 8 Ohm Peak Power, both channels driven: PMP960M 8 Ohm per channel PMP980S 8 Ohm per channel PMP1280S 8 Ohm per channel PMP960M 4 Ohm per channel PMP980S 4 Ohm per channel PMP1280S 4 Ohm per channel 225 W 225 W 300 W 350 W 350 W 600 W 500 W 500 W 900 W
Converter Dynamics D/A Sampling rate Delay Time Signal run time (Line In > Line Out)
Peak Power, bridged mode:
PMP960M 8 Ohm 900 W 900 W 1200 W

DISPLAY

PMP960M Type PMP980S/PMP1280S Type 2-digit, 7-segment LED 2 x 2-digit, 7-segment LED
PMP980S 8 Ohm PMP1280S 8 Ohm

OUTPUT POWER

RMS @ 1% THD (sine wave), both channels driven: PMP960M 8 Ohm per channel PMP980S 8 Ohm per channel PMP1280S 8 Ohm per channel 165 W 165 W 215 W
PMP1280S 100 - 120 V~, 50/60 Hz 220 - 240 V~, 50/60 Hz T 10 A H 250 V T 6.3 A H 250 V 1000 W IEC standard receptacle

POWER CONSUMPTION

Power consumption Mains connector

14 DIMENSIONS/WEIGHT

Dimensions (H x W x D) PMP960M Weight PMP980S Weight PMP1280S Weight approx. 12 2/5" x 18 1/10" x 8 3/5" approx. 315 mm x 460 mm x 220 mm 8.5 kg, 18 3/4 lbs. 9.4 kg, 20 3/4 lbs. 10.6 kg , 23 1/3 lbs.
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing productswithout prior notice. Specifications and appearance may differ from those listed or illustrated.

Warranty

1 Warranty
[1] limited warranty is valid only if you purchased the product from a BEHRINGER This [2] This limited warranty does not cover the product if it has been electronically or
authorized dealer in the country of purchase. A list of authorized dealers can be found on BEHRINGERs website www.behringer.com under Where to Buy, or you can contact the BEHRINGER office closest to you.
[2] BEHRINGER* warrants the mechanical and electronic components of this product

to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of purchase (see the Limited Warranty terms in 4 below), unless a longer minimum warranty period is mandated by applicable local laws. If the product shows any defects within the specified warranty period and that defect is not excluded under 4, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or reconditioned product or parts. In case BEHRINGER decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e., one (1) year (or otherwise applicable minimum warranty period) from the date of purchase of the original product.
[3] Upon validation of the warranty claim, the repaired or replacement product will
mechanically modified in any way. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. This limited warranty does not cover any such modification/adaptation, regardless of whether it was carried out properly or not. Under the terms of this limited warranty, BEHRINGER shall not be held responsible for any cost resulting from such a modification/adaptation.
[3] This limited warranty covers only the product hardware. It does not cover
technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product. Any such software is provided AS IS unless expressly provided for in any enclosed software limited warranty.
[4] This limited warranty is invalid if the factory-applied serial number has been
altered or removed from the product.
[5] Free inspections and maintenance/repair work are expressly excluded from this
be returned to the user freight prepaid by BEHRINGER.
[4] Warranty claims other than those indicated above are expressly excluded.
PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE.
limited warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar strings, illuminants and similar parts.

[6] Damage/defects caused by the following conditions are not covered by this

2 Online registration

Please do remember to register your new BEHRINGER equipment right after your purchase at www.behringer.com under Support and kindly read the terms and conditions of our limited warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation!
limited warranty: improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; damage/defects caused by acts of God/Nature (accident, fire, flood, etc) or any other condition that is beyond the control of BEHRINGER.
[7] Any repair or opening of the unit carried out by unauthorized personnel
3 Return authorization number
[1] obtain warranty service, please contact the retailer from whom the equipment To
(user included) will void the limited warranty.
[8] If an inspection of the product by BEHRINGER shows that the defect in question is
was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may contact the BEHRINGER distributor for your country listed under Support at www.behringer.com. If your country is not listed, please check if your problem can be dealt with by our Online Support which may also be found under Support at www.behringer.com. Alternatively, please submit an online warranty claim at www.behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product. After verifying the products warranty eligibility with the original sales receipt, BEHRINGER will then issue a Return Materials Authorization (RMA) number.
[2] Subsequently, the product must be returned in its original shipping carton,
not covered by the limited warranty, the inspection costs are payable by the customer.
[9] Products which do not meet the terms of this limited warranty will be repaired
exclusively at the buyers expense. BEHRINGER or its authorized service center will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, BEHRINGER will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order.

[10 Authorized BEHRINGER dealers do not sell new products directly in online ]
together with the return authorization number to the address indicated by BEHRINGER.
[3] Shipments without freight prepaid will not be accepted.
auctions. Purchases made through an online auction are on a buyer beware basis. Online auction confirmations or sales receipts are not accepted for warranty verification and BEHRINGER will not repair or replace any product purchased through an online auction.

4 Warranty Exclusions

[1] limited warranty does not cover consumable parts including, but not limited This
5 Warranty transferability
This limited warranty is extended exclusively to the original buyer (customer of authorized retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of BEHRINGER.
to, fuses and batteries. Where applicable, BEHRINGER warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
EUROPOWER PMP960M/PMP980S/PMP1280S
Responsible party name: Address: MUSIC Group Services USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +Fax: +673 7647

Phone/Fax No.:

complies with the FCC rules as mentioned in the followingparagraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician forhelp. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important information: Changes or modifications to the equipment not expressly approved by MUSIC Group can void the users authority to use the equipment.

behringer.com

Legal Disclaimer

6 Claim for damage

Subject only to the operation of mandatory applicable local laws, BEHRINGER shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind. In no event shall the liability of BEHRINGER under this limited warranty exceed the invoiced value of the product.
Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. BEHRINGER products are sold through authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of Red Chip Company Ltd. ALL RIGHTS RESERVED. 2009 Red Chip Company Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands
7 Limitation of liability
This limited warranty is the complete and exclusive warranty between you and BEHRINGER. It supersedes all other written or oral communications related to this product. BEHRINGER provides no other warranties for this product.
8 Other warranty rights and national law
[1] limited warranty does not exclude or limit the buyers statutory rights as a This

consumer in any way.

[2] The limited warranty regulations mentioned herein are applicable unless they
constitute an infringement of applicable mandatory local laws.
[3] This warranty does not detract from the sellers obligations in regard to any lack of
conformity of the product and any hidden defect.

9 Amendment

Warranty service conditions are subject to change without notice. For the latest warranty terms and conditions and additional information regarding BEHRINGERs limited warranty, please see complete details online at www.behringer.com.
* BEHRINGER Macao Commercial Oshore Limited of Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau, including all BEHRINGER group companies