REV2496

Technical Specifications
Version 1.0 November 2003

V-VERB PRO

ENGLISH

V-VERB PRO REV2496

Ultra High-Performance 24-Bit/96 kHz Dual-Engine Reverb Modeler
s Reference-class reverb modeling processor with high-quality 24-bit/96 kHz A/D and D/A converters
s Full 4-channel operation up to 96 kHz without any limitations, providing two separate effects processors in one unit s 8 high-end reverb algorithms, modeled after world-class reverb processors
s Additional high-quality modulation effects from X-over Delay to Chorus/Flanger plus stereo Compressor
s Full-featured digital interface with AES/EBU In/Out, optical S/PDIF In/Out, Wordclock In and MIDI function for flexible use with digital equipment
s Ultra high-resolution SHARC processor with 32-bit internal signal processing for ultimate sonic resolution s 10 different routing types for flexible assignment of analog and digital connectors to both stereo engines
s Innovative user interface with soft push/turn encoders, big preset wheel, high-resolution graphic LCD display and additional TAP button for delay times s Direct access to 4 effect parameters makes editing easy and comfortable
s Intuitive editing of up to 30 parameters using specially designed graphic mode s Separate ROM and user preset banks with 400 presets total
s Balanced inputs and servo-balanced outputs with gold-plated XLR and TRS connectors s Open architecture allows future software updates via MIDI
s Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus lowest possible power consumption for energy saving s Ultra-rugged construction ensures long life, even under most demanding conditions s Designed in Germany. Manufactured under ISO9000 certified management system 2
ANALOG INPUTS Type Impedance Max. input level CMRR ANALOG OUTPUTS Type Impedance Max. output level SYSTEM SPECIFICATIONS Frequency range Signal-to-noise ratio Dynamic range THD Crosstalk Signal delay DIGITAL INPUT 1 Type Standard input impedance nominal input level DIGITAL INPUT 2 Type Standard DIGITAL OUTPUT 1 Type Standard DIGITAL OUTPUT 2 Type Standard SYNC INPUT Type Standard input impedance Nom. level MIDI Interface Type Implementation DIGITAL PROCESSING Processor Converter Sample rate DISPLAY Type MEMORY Presets POWER SUPPLY Mains voltage Power consumption Fuse Mains connector DIMENSIONS/WEIGHT Dimensions Weight

SPECIFICATIONS

XLR balanced 1/4" TRS stereo balanced approx. 22 k balanced +16 dBu typ. 40 dB XLR, servo-balanced 1/4" TRS stereo servo-balanced approx. 100 balanced +16 dBu <10 Hz - 20 kHz @ 44.1 kHz <10 Hz - 22 kHz @ 48 kHz <10 Hz - 46 kHz @ 96 kHz -90 dBu 106 dB (analog in analog out) 0,007% typ. @ +4dBu, 1 kHz, Gain 1 < -100 dB (analog in analog out) < 1 ms (analog in analog out) XLR servo-balanced AES/EBU or S/PDIF 110 0.2 - 5 V peak-to-peak TOSLINK optical AES/EBU or S/PDIF XLR servo-balanced AES/EBU or S/PDIF TOSLINK optical AES/EBU or S/PDIF BNC Wordclock (1 x sample rate) approx. 50 k 2 - 6 V peak-to-peak 5-pin DIN jacks In/Out/Thru cf. MIDI implementation chart high-resolution SHARC DSP, 600 MFLOPs, 32-bit internal signal processing 24 Bit/96 kHz external, 44.1 kHz, 48 kHz, 96 kHz 128 x 64 backlit liquid crystal display (green) with adjustable contrast 100 ROM + 100 user presets for engines A and B, 100 ROM + 100 user presets for combinations V~, Hz 10 W typ. T 1A H Standard receptacle 19" (482.6 mm) x 1 " (44.5 mm) x 8 " (217 mm) approx. 4 " lbs. (2.15 kg)

BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the specifications and design of the device may differ from the information given in this manual.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. SHARC as well as the names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications depicted may vary slightly from product. No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER is a registered trademark. ALL RIGHTS RESERVED. 2003 BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Mnchheide II, Germany Tel. +9206 0, Fax +9206 4903