REVERB MACHINE RV600

Thank you for showing your confidence in us by purchasing the BEHRINGER REVERB MACHINE RV600. This ultimate effects pedal is specifically designed to deliver 24-bit, high-resolution stereo reverbs comparable to state-of-the-art studio processors. Thanks to its 11 well-known modes and the extensive parameter control that allow for maximum creativity, youll have plenty of great sounds at your disposal for every situation.

1. CONTROLS

Top view The TONE control allows you to shape your overall sound. The MIX control determines the amount of reverb added to the signal. The DECAY control determines how quickly the reverb fades. In ECHO mode, it determines the amount of signal feedback. The blue ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator. The TIME control determines the pre-delay time, that is, the delay time between the original dry sound and the actual, audible reverb effect. In SPACE mode, it determines the harmonic density of the signal. This control lets you choose one of the eleven reverb type effects: ECHO: Very fat echo with reverb. TILE: Emulates the acoustics of a tiled room with bright early reflections, like a bathroom. CAVE: Deep and large echo, like being inside a cave. SPACE: Ambiental, lush reverb with a dense, harmonized, octave-shifted content. DUCKNG: Hall reverb with a ducking effect. The reverb ducks under your instruments signal while you are playing to avoid clouding your sound, and reemerges when you stop, adding a rich and smooth tail to it. HALL: Bright and open reverb that simulates the reflections of a concert hall. CHMBR: Emulates the highly reflective acoustics of a typical reverb chamber. ROOM: Clear and natural acoustics of a room. PLATE: Metallic, resonant sound of a plate reverb. SPRING: Simulates the distinct and beloved sound of a spring reverb. 63 SP: Emulates the classic sound of a 1963 guitar combo spring reverb. With the TRAILS switch turned on, the reverb will smoothly fade away once you bypass the effect instead of simply being cut off. Use the two 1/4" TS connectors IN A and IN B to plug in a stereo input signal. For mono signals connect to IN A. The two 1/4" TS connectors OUT A and OUT B send the signal to your amp. Use both outputs to achieve a full stereo effect. For mono use, connect to OUT A. Use the footswitch to activate/deactivate the effect. Use the DC IN connection to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
The RV600 has no on/off switch. As soon as you insert the plug into the IN connector, the RV600 is on. When not using the RV600, remove the plug from the IN connector. This extends the life of the battery. The SERIAL NUMBER is located on the underside. In rare cases interferences of the normal function may appear by external influence (e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application.

2. WARRANTY

For our current warranty terms, please refer to our website at http://www.behringer.com.

3. SPECIFICATIONS

IN A Connector Impedance Impedance mono OUT A Connector Impedance Power supply 1/4" TS 1 k 1/4" TS 500 k 250 k IN B Connector Impedance OUT B Connector Impedance 1/4" TS 500 k

1/4" TS 1 k

Power connector Battery Power consumption Dimensions (H x W x D) Weight
9 V_, 100 mA, regulated BEHRINGER PSU-SB U.S.A./Canada 120 V~, 60 Hz China 220 V~, 50 Hz Korea 220 V~, 60 Hz Europe/U.K./Australia 230 V~, 50 Hz Japan 100 V~, Hz 2 mm DC jack, negative center 9 V type 6LRmA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0.33 kg (0.73 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

4. SAFETY INSTRUCTIONS

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged. No utilizar cerca de agua o instalar cerca de fuentes de calor. Utiliza slo accesorios y aditamentos autorizados. No intentes reparar el producto t mismo. Contacta a nuestro personal tcnico cualificado para servicio y reparaciones, especialmente cuando la fuente o el cable de alimentacin estn daados. . . . , .
Die deutsche Anleitung ist erhltlich @ www.behringer.com Manuel francophone en tlchargement sur www.behringer.com Manual en espaol disponible en www.behringer.com Manuali italiani disponibili @ www.behringer.com @ www.behringer.com Polska instrukcja dostpna jest pod adresem @ www.behringer.com Nederlandse handleiding beschikbaar @ www.behringer.com Suomenkielinen kyttohje saatavilla osoitteesta www.behringer.com Svensk manual finns tillgnglig p www.behringer.com Dansk vejledning findes p @ www.behringer.com Manual portugus disponvel @ www.behringer.com www.behringer.com
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specification may vary slightly from product. Products are sold through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. ALL RIGHTS RESERVED. 2006 BEHRINGER International GmbH, HannsMartin-Schleyer-Str. 36-38, 47877 Willich-Mnchheide II, Germany. Tel. +9206 0, Fax +9206 4903
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible party name: Address: MUSIC Group Services USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +Fax: +673 7647

Phone/Fax No.:

complies with the FCC rules as mentioned in the followingparagraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. Consult the dealer or an experienced radio/TV technician forhelp. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesiredoperation. Important information: Changes or modifications to the equipment not expressly approved by MUSIC Group can void the users authority to use the equipment.

behringer.com