ULTRA CHORUS UC200

Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA CHORUS UC200. This ultimate effects pedal is designed to deliver super-thick chorus with unbelievable stereo effect. Thanks to its high-performance features youll have full parameter control for absolute flexibility and limitless creative options. The chorus effect slightly detunes the original signal. A very pleasant detune effect is created in connection with the pitch variation. The chorus effect is used often and quite extensively used for dispersing signals.

1. CONTROLS

Top view The LEVEL control adjusts the output level. The TONE control allows you to adjust the overall effects sound and achieve a more defined and brilliant tone. The RATE control determines the chorus effect speed. Turn up the DEPTH control to achieve a fuller, deeper effect sound. The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator. Use the footswitch to activate/deactivate the effect. Use this 1/4" TS IN connector to plug in the instrument cable. The two 1/4" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if you want to achieve full stereo chorus effect. For mono use just plug in OUT A. Use the DC IN connection to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
The UC200 has no on/off switch. As soon as you insert the jack into the IN connector, the UC200 begins running. When not using the UC200, remove the jack from the IN connector. This extends the life of the battery. The SERIAL NUMBER is located at the bottom.

2. WARRANTY

For our current warranty terms, please refer to our website at http://www.behringer.com.

3. SPECIFICATIONS

In Connector Impedance Out A Connector Impedance Out B Connector Impedance Power supply 1/4" TS 1 k 9V , 100 mA regulated BEHRINGER PSU-SB USA/Canada 120 V~, 60 Hz China/Korea 220 V~, 50 Hz U.K./Australia 240 V~, 50 Hz Europe 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz 2 mm DC jack, negative center 9 V type 6LR61 approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0.33 kg (0.73 lbs) 1/4" TS 1 k 1/4" TS 500 k
Power connector Battery Dimensions (H x W x D) Weight
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

4. SAFETY INSTRUCTIONS

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged. No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice slo accesorios y aditamentos autorizados. No intent reparar el producto usted mismo. Contacte a nuestro personal tcnico cualificado para servicio y reparaciones, especialmente cuando la fuente o el cable de alimentacin estn daados. . . . , .
Die deutsche Anleitung ist erhltlich @ www.behringer.com Manuel francophone en tlchargement sur www.behringer.com Manual en espaol disponible en www.behringer.com Manuali italiani disponibili @ www.behringer.com @ www.behringer.com Polska instrukcja dostpna jest pod adresem @ www.behringer.com Nederlandse handleiding beschikbaar @ www.behringer.com Suomenkielinen kyttohje saatavilla osoitteesta www.behringer.com Svensk manual finns tillgnglig p www.behringer.com Dansk vejledning findes p @ www.behringer.com Manual portugus disponvel @ www.behringer.com www.behringer.com

Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER is a registered trademark. ALL RIGHTS RESERVED. 2006 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Mnchheide II, Germany. Tel. +9206 0, Fax +9206 4903
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible party name: Address: MUSIC Group Services USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +Fax: +673 7647

Phone/Fax No.:

complies with the FCC rules as mentioned in the followingparagraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. Consult the dealer or an experienced radio/TV technician forhelp. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesiredoperation. Important information: Changes or modifications to the equipment not expressly approved by MUSIC Group can void the users authority to use the equipment.