User Manual

U-PHONO UFO202
High-quality USB Audio Interface with Built-in Phono Preamp and Massive Software Package for Digitalizing Your Tapes and Vinyl Records

Thank you

Thank you for choosing the new UFO202 U-PHONO interface from BEHRINGER. You will now be able to transfer all your great albums from the vinyl and tape eras into the digital realm with the help of this easy-to-use device. It features stereo RCA inputs and outputs to allow both monitoring and recording of the audio source. The USB connection will work with either PCs or Mac computers, so no drivers are needed for installation, and power is supplied through the USB cable. The separate headphones output allows you to play back your recordings at any time, even if you dont have any loudspeakers available. Weve also included free software to help you transfer and edit the music in a streamlined fashion, allowing you to spend less time fidgeting with settings and more time listening to your favorite songs.

Table of Contents

Thank you... 1 Important Safety Instructions. 2 Before You Get Started.. 3
Shipment....3 Initial operation...3 Online registration....3

System Requirements.. 3

Hardware connection...3
Operating Elements and Connections.. 3 Software Installation... 4 Hookup Diagram... 4
Hooking up a record player..4 Hooking up a tape player...4
Recording Process... 4 Audio Connections.. 5

Wiring...5

Specifications... 5 Legal Disclaimer... 6 Warranty.. 7
This manual is available in English, German, French, Spanish, Italian, Russian, Polish, Dutch, Finnish, Swedish, Danish, Portugese, Greek, Japanese and Chinese. There may also be more current versions of this document. Download them by going to the appropriate product page at:

www.behringer.com

A50-A1230-08001

ENGLISH

U-PHONO UFO202 User Manual
Important Safety Instructions

Caution

To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel.
{1}. {2}. {3}. {4}. {5}. {6}. {7}.

* * !!

To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. {8}. Only use attachments/accessories specified by the manufacturer. {9}. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [10]. CAUTION - These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions unless you are qualified to do so.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Before You Get Started

Shipment
Your UFO202 was carefully packed at the assembly plant to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage. Damaged equipment should NEVER be sent directly to us. Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery. Otherwise, all claims for replacement/repair may be rendered invalid. Please always use the original packaging to avoid damage due to storage or shipping. Never let unsupervised children play with the equipment or with its packaging. Please dispose of all packaging materials in an environmentally friendly fashion.

System Requirements

The UFO202 is PC and Mac-compatible. Therefore, no installation procedure or drivers are required for the correct functioning of the UFO202. To work with the UFO202, your computer must fulfill the following minimum requirements:
PC Intel or AMD CPU, 400 MHz or higher Minimum 128 MB RAM USB 1.1 interface Windows XP, 2000 MAC G3, 300 MHz or higher Minimum 128 MB RAM USB 1.1 interface Mac OS 9.0.4 or higher, 10.X or higher

Hardware connection

Use the USB connecting cable supplied with the UFO202 to connect the unit to your computer. The USB connection also supplies the UFO202 with current. You can connect a variety of devices and equipment to the inputs and outputs.

Initial operation

Please make sure the unit is provided with sufficient ventilation, and never place the UFO202 on top of an amplifier or in the vicinity of a heater to avoid the risk of overheating. The current supply is made via the USB connecting cable, so that there is no external power supply unit required. Please adhere to all required safety precautions.
Operating Elements and Connections

Online registration

Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (www.behringer.com/ support). Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation!

[2] [3]

L and R RCA outputs Connect an external monitoring device, such as a pair of monitor speakers, to the left and right RCA outputs. (this step is optional) L and R RCA inputs Connect the audio source (record player, tape player, etc.) to the left and right RCA inputs. Ground connection Some record players have a separate ground cable. If so, attach the cable to the ground terminal to avoid excessive noise and hum. Line/Phono switch Move the switch on the top left to PHONO if transferring from a record player. For all other sources, select LINE.
Note: The PHONO inputs only support moving magnet cartridges. These are the most common type, so unless you know your player uses a moving coil cartridge, assume that your system will work. [5] Headphones output Plug your headphones into the PHONES output using a " mini plug. [6] Headphones volume Adjust the headphones volume with the adjacent control. [7] USB cable Plug the USB cable into a free USB port on your computer. [8] Power indicator Upon connection, the UFOs power indicator will light up and the computer should automatically recognize the connection.
U-PHONO UFO202 User Manual a ground cable that needs to be attached to the ground terminal on the UFO202. 3. Connect a monitoring device. You may plug speakers into the RCA outputs or connect a pair of headphones to the PHONES output. 4. Connect the attached USB cable to a free USB port on your computer.
RCA Ins RCA Outputs Line/Phono

Software Installation

This device requires no special setup or drivers, just plug it into a free USB port on a PC or Mac computer. The UFO202 comes with a free version of Audacity editing software. This will help make the transfer process quick and simple. Simply insert the install CD into your CD-ROM drive and follow the instructions. The CD also contains VST plugins, ASIO drivers and various freeware. For other audio needs, such as advanced editing, instrument recording, sequencing, etc., a free version of energyXT2 Compact BEHRINGER edition is also included.
Computer USB Headphone Out

Hooking up a tape player

Hookup Diagram
1. Move the LINE/PHONO switch on the UFO202 to the left (LINE selected). 2. Connect a stereo RCA cable from the tape player outputs to the RCA inputs on the UFO202. 3. Connect a monitoring device. You may plug speakers into the RCA outputs or connect a pair of headphones to the PHONES output. 4. Connect the attached USB cable to a free USB port on your computer.

Ground Line/Phono

RCA Ins

RCA Outputs

Recording Process
After hookups have been made and software installed, you are ready to record the audio. Make sure your audio recording program is set to record input from the USB port. For simple record, cut, and export of stereo audio, you may prefer to use Audacity. For more extensive editing, energyXT2 Compact may be the best choice If recording from a tape player, make sure the player's volume is turned up all the way. Adjust the input sensitivity of the recording program to achieve optimal sound quality. Too much signal will cause the recording to distort; too little signal will sound faint and thin, so record a test clip to ensure quality sound. The recording program should have meters that display the levels as the audio streams.

Computer

USB Headphone Out
Hooking up a record player
1. To transfer music from a record player, a special preamplification process must take place in order to boost the low signal level coming from the player. To do this, simply move the LINE/ PHONO switch on the UFO202 to the right (PHONO selected). 2. Connect a stereo RCA cable from the record player outputs to the RCA inputs on the UFO202. The player will also likely have
U-PHONO UFO202 User Manual Set your recording program on your computer to RECORD, and begin playing the start of the tape or record immediately after. Let the audio play all the way through the first side. Once the music stops, press STOP on the recording program. Flip the tape or record over and repeat the recording process. Once both sides are recorded, you may edit the file to cut out any extra time before or after the audio was captured. You may also cut the long track into individual songs and save the files separately. This process differs slightly depending on what program you are using, so refer to the software manual for editing procedures. You can play back your stereo recorded audio through the UFO202 RCA outputs and PHONES output. You may want to apply equalization or other processing if your software application is so equipped. If you plan to burn these files to a CD for use in a home stereo or car, save the audio in WAV format.

Specifications

LINE IN Connectors Input impedance Max. input level LINE OUT Connectors Output impedance Max. output level DIGITAL OUTPUT Socket Output format PHONES OUT Socket Output impedance Max. output level USB 1.1 Connectors DIGITAL PROCESSING Converter Sample rate SYSTEM DATA Frequency response THD Crosstalk Signal-to-noise ratio POWER SUPPLY USB connection DIMENSIONS/WEIGHT Dimensions (H x W x D) Weight RCA, unbalanced approx. 27 k 2 dBV RCA, unbalanced approx. dBV Toslink, optical cable S/PDIF 18" TRS stereo jack approx. 50 -2 dBu, 2 x 3,7 mW @ 100 type A 16-bit converter 32.0 kHz, 44.1 kHz, 48.0 kHz 10 Hz to 20 kHz, 1 dB @ 44.1 kHz sample rate 10 Hz to 22 kHz, 1 dB @ 48.0 kHz sample rate 0.05 % typ. @ -10 dBV, 1kHz -77 dB @ 0 dBV, 1 kHz A/D 89 dB typ. @ 1 kHz, A-weighted D/A 96 dB typ. @ 1 kHz, A-weighted 5 V , 100 mA max. approx. 22 mm (0.87") x 88 mm (3.46") x 60 mm (2.36") approx. 0.12 kg

Audio Connections

Although there are various ways to integrate the UFO202 into your studio or live set-up, the audio connections to be made will basically be the same in all cases:

Wiring

Please use standard RCA cables to connect the UFO202 to other equipment:
tip sleeve shield sleeve tip
You can also use a " adapter cable:

Sleeve Tip

BEHRINGER always takes great care to ensure the highest standard of quality. Any modifications which may be necessary will be made without prior notification. Technical data and appearance of the equipment can therefore differ from the details or illustrations shown.

Headphones connection

The UFO202 is provided with a headphones jack. Here, you can connect any standard pair of stereo headphones with a " TRS connector.

Legal Disclaimer

Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN and U-PHONO) mentioned belong to their respective owners, and such use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. Mac and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. ASIO is a trademark and software of Steinberg Media Technologies GmbH. VST is a trademark of Steinberg Media Technologies GmbH. AMD is a trademark or registered trademark of Advanced Micro Devices, Inc. Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. energyXT2, energyXTC and the energyXT logo are trademarks of XT Software AS incorporated in Norway, and are protected under the laws of Norway, and are being used under license by Behringer Holdings (Pte) Ltd and related companies. BEHRINGER, accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. Our products are sold through authorized dealers only. Distributors and dealers are not agents of BEHRINGER, and have absolutely no authority to bind BEHRINGER, by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. ALL RIGHTS RESERVED. 2009 BEHRINGER, International GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich, Germany. Tel. +9206 0, Fax +9206 4903

Warranty

1 Other warranty rights and national law [1]. This warranty does not exclude or limit the buyers statutory rights provided

by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
[2]. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. The warranty does not cover any such modification/adaptation, irrespective of whether it was carried out properly or not. Under the terms of this warranty, BEHRINGER shall not be held responsible for any cost resulting from such a modification/adaptation.
[2]. The warranty regulations mentioned herein are applicable unless they
constitute an infringement of national warranty law.

2 Online registration

Please do remember to register your new BEHRINGER equipment right after your purchase by visiting http://www.behringer.com and kindly read the terms and conditions of our warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation!
[3]. Free inspections and maintenance/repair work are expressly excluded from
this warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar strings, illuminants and similar parts.
[4]. Damage/defects caused by the following conditions are not covered by this
3 Warranty [1]. BEHRINGER (BEHRINGER International GmbH including all
BEHRINGER subsidiaries, except BEHRINGER Japan) warrants the mechanical and electronic components of this product to be free of defects in material and workmanship for a period of one (1) year* from the original date of purchase, in accordance with the warranty regulations described below. If the product shows any defects within the specified warranty period that are not excluded from this warranty as described under 5, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or reconditioned parts. In the case that other parts are used which constitute an improvement, BEHRINGER may, at its discretion, charge the customer for the additional cost of these parts.
warranty: improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; damage/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER.

[5]. Any repair or opening of the unit carried out by unauthorized personnel
(user included) will void the warranty.
[6]. If an inspection of the product by BEHRINGER shows that the defect in
question is not covered by the warranty, the inspection costs are payable by the customer.
[2]. If the warranty claim proves to be justified, the product will be returned to
the user freight prepaid.
[7]. Products which do not meet the terms of this warranty will be repaired exclusively at the buyers expense. BEHRINGER will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, BEHRINGER will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order.
[3]. Warranty claims other than those indicated above are expressly excluded.
4 Return authorization number [1]. To obtain warranty service, the buyer (or his authorized dealer) must
call BEHRINGER during normal business hours BEFORE returning the product. All inquiries must be accompanied by a description of the problem. BEHRINGER will then issue a return authorization number.
6 Warranty transferability
This warranty is extended exclusively to the original buyer (customer of retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of BEHRINGER.
[2]. Subsequently, the product must be returned in its original shipping carton,
together with the return authorization number to the address indicated by BEHRINGER.
[3]. Shipments without freight prepaid will not be accepted.
5 Warranty regulations [1]. Warranty services will be furnished only if the product is accompanied by a
copy of the original retail dealers invoice. Any product deemed eligible for repair or replacement under the terms of this warranty will be repaired or replaced.

7 Claim for damage

Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim (consequential) damages. In no event shall the liability of BEHRINGER exceed the invoiced value of the product.

Customers in the European Union please contact BEHRINGER Germany Support for further details.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible party name: Address: MUSIC Group Services USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +Fax: +673 7647

Phone/Fax No.:

complies with the FCC rules as mentioned in the followingparagraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician forhelp. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important information: Changes or modifications to the equipment not expressly approved by MUSIC Group can void the users authority to use the equipment.

Audio Interfaces

U-PHONO UFO202
U-PHONOHigh-quality USB Audio Interface with Built-in Phono Preamp and Massive Software Package for Digitalizing Your Tapes and Vinyl Records High-quality USB audio interface connects your turntable, cassette player, etc. with your computer for recording and playback Transfer and restore your valuable vinyl records and tapes to your computer via a simple USB connection Massive software bundle includes Audacity vinyl restoration, noise-reduction, editing and recording software, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms Phono input switchable to line input source Stereo output allows easy connection and playback of computer audio files over your home sound system High-resolution 48 kHz converters for high-end audio quality Stereo Headphone output with dedicated Level control lets you monitor your input source Works with your PC or Mac computerno setup or drivers required Powered via USBno external power supply needed High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
Love Your Old Records and Cassette Tapes? We love ours too! Thats why we built the UFO202 a simple, affordable way to get your records and vinyl tapes into the digital realm. The UFO202 is easy to use and comes with a bevy of professional software that not only converts your favorite recordings into files on your computer, but also removes those annoying scratches and pops so common to vinyl media. State-of-the-art, switchable Line/Phono preamps and digital converters ensure the utmost in sound quality, making the U-PHONO UFO202 Audio Interface a must-have for every audiophile. PC and Mac Ready This ultra-compact, USB-powered device lets you connect your PC or Mac computer to virtually any piece of audio gear. It gets its power from your computers USB bus, so no external power supply or batteries are required. And the UFO202 requires no special setup or driversjust plug it in to a free USB port and start recording.

Continued on next page

Page 2 of 3
Recording from a Tape Deck
Extreme Versatility The UFO202 features a stereo input for connecting turntables or any line-level device (such as a mixer or tape deck), plus a stereo analog output for connecting active speakers or studio monitors. You can also connect electronic keyboards, sound modules, drum machines and line-level devices (such as the V-AMP 3) directly to your computer for recording. The Volume control allows you to set the level of the stereo headphones. Powerful Recording Interface When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UFO202s RCA outputs to the TAPE INPUT jacks of your mixer or active monitors, or directly into the input channels of the mixer. Connecting to mixer input channels gives you access to equalization and allows the use of the AUX Send features of your mixer to build extremely versatile monitor mixes for your recording sessions. Tons of free software Because youll want to take full advantage of the UFO202s podcasting and recording potential weve included a massive software package including Audacity, Podifier, Juice, Podnova and Golden Ear. Youre ready to go live on your Mac or PC computer right out of the box! You also get more than 150 virtual instruments and effects plug-ins, turning your computer into a complete home-based or mobile recording studio from input to output. energyXT2.5 Compact BEHRINGER Edition included When youre ready to take your recording projects to the next level, XT Softwares energyXT is just the trick. This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode. To learn more about energyXT Compact BEHRINGER Edition, visit http://behringer.com/EN/Support/energyXT.aspx

HPS3000 energyXT2.5 software sold separately Computer USB
Tape Recorder RCA Outputs

B3031A

TS Ins

Line/Phono

Headphone Out HPS3000
Recording from a Turntable

Turntable

B3031A RCA Outputs

Ground Line/Phono

Computer

Headphone Out

Page 3 of 3
PC Intel or AMD CPU, 400 MHz or higher Minimum 128 MB RAM USB 1.1 interface Windows XP, 2000 or higher MAC G3, 300 MHz or higher Minimum 128 MB RAM USB 1.1 interface Mac OS 9.0.4 or higher, 10.X or higher
Now for just a fraction of the price youd pay for a USB turntable you can have state-of-the-art digital conversion, world-class recording and editing software, and hassle-free connectivity between your
PC or Mac computer and virtually any piece of audio gear, including phono turntables and tape decks. Bridging the gap between your music and the rest of the worldthe BEHRINGER U-PHONO UFO202.

Power LED

Line-Phono switch

Turntable ground lug

RCA inputs for recording
RCA outputs for external active speakers

USB cable

1/8" head phones jack
Headphones Volume control
SPECIFICATIONS LINE IN SWITCHABLE Connectors Input impedance Max. input level PHONO IN SWITCHABLE Connectors Input impedance Max. input level RIAA Accuracy LINE OUT Connectors Output impedance Max. output level
RCA, unbalanced approx. 47 k 2 dBV
PHONES OUT Socket Output impedance Max. output level USB 1.1 Connectors DIGITAL PROCESSING Converter Sample rate SYSTEM DATA Frequency response
Signal-to-noise ratio 1/8" TRS stereo jack approx. 50 -2 dBu, 2 x 3,7 mW @ 100 POWER SUPPLY USB connection DIMENSIONS/WEIGHT Dimensions (H x W x D) Weight
A/D 89 dB typ. @ 1 kHz, A-weighted D/A 96 dB typ. @ 1 kHz, A-weighted

5 V , 100 mA max.

type A
RCA, unbalanced approx. 47 k /100 pF 39 dBV < 1.5 dB / 20 Hz - 20 kHz
approx. 0.87 x 3.46 x 2.36" approx. 22 x 88 x 60 mm approx. 0.26 lbs / approx. 0.12 kg
16-bit converter 32.0 kHz, 44.1 kHz, 48.0 kHz
RCA, unbalanced approx. dBV

THD Crosstalk

20 Hz to 20 kHz, 1 dB @ 44.1 kHz sample rate 20 Hz to 22 kHz, 1 dB @ 48.0 kHz sample rate 0.05 % typ. @ -10 dBV, 1kHz -77 dB @ 0 dBV, 1 kHz
Please note these specifications are preliminary and conceptual in nature, and as such are subject to change as product development progresses. This information is supplied for market research purposes only and is not to be made public in any manner. This document is solely the property of The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner.

For service, support or more information contact the BEHRINGER location nearest you: Europe Tel.: +Singapore Tel.: +1800 Fax: +Fax: +0275 USA/Canada Tel.: +Australia Tel.: +Fax: +Fax: +9877 7870

Tel.: +Fax: +5281 1181

2010 Red Chip Company Ltd. Technical specications and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00356