ULTRA METAL UM300

Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA METAL UM300. This high-quality effects pedal comes with a dual-gain circuitry that enables you to produce super thick, tube-like distortion plus endless sustain. Thanks to its high-performance features you will achieve the most extreme and sought-after hard rock or heavy metal distortion sounds.

1. CONTROLS

Top view The DIST(ortion) control adjusts the amount of distortion effect. The HIGH control allows you to boost/cut the high-frequency range. The LOW control allows you to boost/cut the low-frequency range. Please keep in mind that extreme distortion and EQ settings will increase noise and may induce oscillation. The two MID FREQ(uency) controls allow to boost/cut a defined mid-frequency range. The upper control is used to increase or lower the mid range, the control below adjusts the center frequency of the mid range that is affected (200 Hz to 5 kHz). The LEVEL control adjusts the output level. The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator. Use the footswitch to activate/deactivate the effect. Use this 1/4" TS IN connector to plug in the instrument cable. The 1/4" TS OUT connector sends the signal to your amp. Use the DC IN connectionto plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
The UM300 has no on/off switch. As soon as you insert the jack into the IN connector, the UM300 begins running. When not using the UM300, remove the jack from the IN connector. This extends the life of the battery. The SERIAL NUMBER is located at the bottom.

2. WARRANTY

For our current warranty terms, please refer to our website at http://www.behringer.com.

3. SPECIFICATIONS

In Connector Impedance Out Connector Impedance Power supply 1/4" TS 1 k , 100 mA regulated 9V BEHRINGER PSU-SB USA/Canada 120 V~, 60 Hz U.K./Australia 240 V~, 50 Hz China/Korea 220 V~, 50 Hz Europe 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz 2 mm DC jack, negative center 9 V type 6LRmA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0.33 kg (0.73 lbs) 1/4" TS 500 k
Power connector Battery Power consumption Dimensions (H x W x D) Weight
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

4. SAFETY INSTRUCTIONS

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged. No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice slo accesorios y aditamentos autorizados. No intent reparar el producto usted mismo. Contacte a nuestro personal tcnico cualificado para servicio y reparaciones, especialmente cuando la fuente o el cable de alimentacin estn daados. . . . , .

Die deutsche Anleitung ist erhltlich @ www.behringer.com Manuel francophone en tlchargement sur www.behringer.com Manual en espaol disponible en www.behringer.com Manuali italiani disponibili @ www.behringer.com @ www.behringer.com Polska instrukcja dostpna jest pod adresem @ www.behringer.com Nederlandse handleiding beschikbaar @ www.behringer.com Suomenkielinen kyttohje saatavilla osoitteesta www.behringer.com Svensk manual finns tillgnglig p www.behringer.com Dansk vejledning findes p @ www.behringer.com Manual portugus disponvel @ www.behringer.com www.behringer.com
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER is a registered trademark. ALL RIGHTS RESERVED. 2006 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Mnchheide II, Germany. Tel. +9206 0, Fax +9206 4903