ULTRA SHIFTER/HARMONIST US600
Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA SHIFTER/ HARMONIST US600. This high-quality effects pedal shifts single notes and chords and even creates intelligent harmonies to your notesat the touch of a footswitch. Take off with incredible Tremolo Arm/Flutter effects to bend single notes or simulate the movement of the tremolo bar.

1. Controls

Top view The D TIME/SPEED control has 2 different functions depending on the effect mode selected. For TREM BAR and FLUTTER mode it adjusts the speed of the pitch change. When using DETUNE mode it controls the delay time of the effect. In PITCH SHIFTER and HARMONIST mode this control is not active. The BALANCE control adjusts the balance between the direct signal and the effect signal in PITCH SHIFTER, DETUNE and HARMONIST mode. At minimum position only the direct signal is provided while at maximum position only the effect signal will be heard. In TREM BAR and FLUTTER modes this control adjusts the output level of the effects pedal. The HR KEY control is used in HARMONIST mode to determine the key you are playing in. This assures that the right notes fitting with the harmonic preconditions are generated by the effect. You can select out of 10 different keys: 1. C major (A minor) 2. G major (E minor) 3. D major (B minor) 4. A major (F# minor) 5. E major (C# minor) 6. B major (G# minor) 7. Gb major (D# minor) 8. Db major (Bb minor) 9. Ab major (Fm minor) 10. Eb major (C minor) 11. Bb major (G minor) 12. F major (D minor) The PITCH control adjusts the amount of pitch shifting. In HARMONIST mode it selects the interval added to the direct signal. Use the MODE control to select one of 5 different effect styles. PITCH SHIFTER: Adds a detuned signal to the original signal with a maximum of 2 octaves above or below. Use the PITCH control to select the degree of pitch shift (-24, -12, -7, -5, -2, -1, +3, +4, +5, +7, +12, +24). HARMONIST: Adds harmonies to the original signal with a maximum of 2 octaves above or below. Use the PITCH control to select the desired interval (-2 Oct, -1 Oct, -6th, -5th, -4th, -3rd, +3rd, +4th, +5th, +6th, +1 Oct, +2 Oct). The intervals are dynamic and adapt to the key determined with the HR KEY control. DETUNE: Adds a subtle detuned signal to the original signal with a maximum of 30 cents above or below (-30 C, -25 C, -20 C, -15 C, -10 C, -5 C, +5 C, +10 C, +15 C, +20 C, +25, +30 C). Use the PITCH control to adjust the amount of detuning and the D TIME/SPEED control to determine the delay time. TREM BAR: Detunes the input signal with a maximum of 2 octaves above or below similar to the effect created with a guitar vibrato arm. Use the PITCH control to adjust the amount of detuning (-12, -5, -4, -3, -2, -1, +1, +2, +3, +4, +5, +12) and the D TIME/SPEED control to determine the time used to reach the defined pitch value. The effect is only active when you keep the footswitch depressed. FLUTTER: Detunes the input signal periodically with a maximum of 1 octave above or below similar to the effect created with a fast moving guitar vibrato arm. Use the PITCH control to adjust the amount of detuning (-12, -5, -4, -3, -2, -1, +1, +2, +3, +4, +5, +12) and the D TIME/ SPEED control to determine the time used to reach the defined pitch value. The effect is only active when you keep the footswitch depressed. The ON/BATT LED illuminates when the effect is activated. Use the footswitch to activate/deactivate the effect. Use this 1/4" TS IN connector to plug in the instrument cable. The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. If both outputs are used they will output different signals in the modes PITCH SHIFTER, HARMONIST and DETUNE. OUT A will have the pitch shifted signal while OUT B will have the input signal. The volume of both outputs will be effected by the BALANCE control. In TREM BAR and FLUTTER mode both outputs will have the pitch shifted signal.

Use the 1/4" TRS EXP/CTL connector to connect an expression pedal. Set the pedal to the lowest position when connecting it to the unit. Then push it to the forward position and choose the desired pitch value with the PITCH control. Now you can control the pitch value of the effect within the range defined by the PITCH control (low position = no pitch shift, forward position = maximum pitch shift). Use the DC IN connection to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit. + The US600 has no on/off switch. As soon as you insert the plug into the IN connector, the US600 begins running. When not using the US600, remove the plug from the IN connector. This extends the life of the battery. The SERIAL NUMBER is located on the underside. + In rare cases interferences of the normal function may appear by external influence (e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application.

2. Warranty

For our current warranty terms, please refer to our website at http://www.behringer.com.

3. Specifications

In Connector Impedance Out A Connector Impedance Out B Connector Impedance Power supply 9 V_, 100 mA regulated USA/Canada Europe/U.K./Australia China Korea Japan Power connector Battery Power consumption Dimensions (H x W x D) Weight 1/4" TS 500 k# 1/4" TS 1 k# 1/4" TS 1 k# BEHRINGER PSU-SB 120 V~, 60 Hz 230 V~, 50 Hz 220 V~, 50 Hz 220 V~, 60 Hz 100 V~, 50/60 Hz 2 mm DC jack, negative center 9 V type 6LRmA approx. 54 x 70 x 123 mm / approx. 2 1/8" x 2 3/4" x 4 4/5" approx. 0.33 kg (0.73 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

4. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged. No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice slo accesorios y aditamentos autorizados. No intent reparar el producto usted mismo. Contacte a nuestro personal tcnico cualificado para servicio y reparaciones, especialmente cuando la fuente o el cable de alimentacin estn daados. . . . , .

Die deutsche Anleitung ist erhltlich @ www.behringer.com Manuel francophone en tlchargement sur www.behringer.com Manual en espaol disponible en www.behringer.com Manuali italiani disponibili @ www.behringer.com @ www.behringer.com Polska instrukcja dostpna jest pod adresem @ www.behringer.com Nederlandse handleiding beschikbaar @ www.behringer.com Suomenkielinen kyttohje saatavilla osoitteesta www.behringer.com Svensk manual finns tillgnglig p www.behringer.com Dansk vejledning findes p @ www.behringer.com Manual portugus disponvel @ www.behringer.com www.behringer.com
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. BEHRINGER, the BEHRINGER logo and JUST LISTEN are trademarks of BEHRINGER. ALL RIGHTS RESERVED. (c) 2007 BEHRINGER International GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Mnchheide II, Germany. Tel. +9206 0, Fax +9206 4903
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible party name: Address: MUSIC Group Services USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +Fax: +673 7647

Phone/Fax No.:

complies with the FCC rules as mentioned in the followingparagraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. Consult the dealer or an experienced radio/TV technician forhelp. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesiredoperation. Important information: Changes or modifications to the equipment not expressly approved by MUSIC Group can void the users authority to use the equipment.