SAVE THESE INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY. Commercial use of this unit voids the manufacturers warranty.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Grounded Outlets

Grounding Pin
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you arent sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the drawing above. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

WARNING:

ug310-5892_9500_107.indd 3

1/8/07 2:56:50 PM

Product view

CleanShot Trigger

Spray Trigger

R TE WANSE I

Power Switch

Heater Switch

Extra Long Power Cord

Flex Hose Upper Handle

Easy Carry Handle Heat Indicator Light Tank Carry Handle ReadyTools Dial Detent Pedal
2-in-1 Water Tank CleanShot Lower Base Dry Aire Easy To Remove Nozzle Edge Sweep Brushes

Accessories:

These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 22-23.

3 Tough Stain Brush

4 Upholstery Tool

6 Stair Tool

TurboBrush

Hard Floor Attachment

Spraying Crevice Tool
Mesh Tool Bag (bag only) 800.237.7691
ug310-5892_9500_107.indd 4

Upper Hose Rack

Hose Secure Latch Upper Handle TurboBrush Storage Crevice Tool Holder
Lower Hose Rack Lower Base

Detent Pedal

Formula Tank
Keep plenty of genuine BISSELL Advanced Cleaning Formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty.

BISSELL Formulas:

48 oz. BISSELL Multi- Allergen Removal Formula with Scotchgard Protector www.bissell.com
48 oz. BISSELL Fiber Cleansing Formula with Scotchgard Protector
48 oz. BISSELL 48 oz. BISSELL Pet Odor and Soil Natural Orange Removal Formula Extract Formula with Scotchgard with Scotchgard Protector Protector
48 oz. BISSELL Lavender Essence Formula with Scotchgard Protector
43 oz. BISSELL 32 oz. 3X Concentrated BISSELL Fiber Cleansing Hard Floor Solutions Formula with Formula Scotchgard Protector 800.237.7691
22 oz. BISSELL Tough Stain PreCleaner
ug310-5892_9500_107.indd 5

1/8/07 2:56:52 PM

How to use this guide
This users guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat 2X. Youll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assembling your deep cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this users guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat 2X for many years.
Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
Your ProHeat 2X comes in three, easy to assemble components: Upper Handle Lower Handle Tool Caddy The only thing you will need to assemble your cleaner is a Phillips head screwdriver. 1. 2. 3. 4. Slide upper handle onto lower handle. Screw 3 screws into the marked holes. Place upper hose rack onto back of upper handle, and secure with tapered screw. Place lower hose rack onto back of upper handle by pushing in and sliding down until it snaps into place. Snap tools into the tool caddy as shown in figure 5. Wrap power cord and flex hose as shown in figure 5. Keep flex hose snugly in place by using the hose secure latch. ProHeat 2X assembly is now complete.

6. 5. 3. 4.

Crevice Tool Holder
Tough Stain Brush TurboBrush Spraying Crevice Tool

5. 6. 7.

Hose Secure Latch
ug310-5892_9500_107.indd 6

1/8/07 2:57:06 PM

Special features
Your BISSELL ProHeat 2X deep cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer, in mind.

Built-in-Heater feature

BISSELL ProHeat 2X models all feature a patented built-in heater which will heat the hot tap water you put in up to 25 degrees hotter to safely optimize cleaning effectiveness. The heater will never allow the temperature to exceed 190 degrees. The heater switch on the front of the machine controls the heater so you have the option to turn off the heat if you are cleaning delicate wool or oriental rugs.
Dual DirtLifter PowerBrushes
The two DirtLifter PowerBrush rolls are designed to enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights and protects your carpet if you leave the power switch ON ( I ). Once the product is in the upright position, the brushes automatically stop spinning. The detent pedal will activate the brushes when floor cleaning.

Custom Clean

The Custom Clean feature automatically mixes hot tap water with the BISSELL formula. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or water rinse) and the ProHeat 2X will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need. Having a separate solution tank from the water tank also allows no waste of formula. Because the water and solution are stored separately, they are not mixed until you are ready to clean. When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time!
(located on upper handle)
ug310-5892_9500_107.indd 7

1/8/07 2:57:07 PM

The CleanShot feature gives you the ability to tackle tough stains with the push of a button. Cleaning solution is sprayed in a concentrated stream, penetrating the stain and allowing for better cleaning focus. Simply spray and suction and the stain is gone! CleanShot is especially effective for spots and stains that would otherwise take a lot of deep cleaning cycles to remove. It allows the cleaning formula and machine to do the work for you.

Operation

Before you clean
1. 2. 3. 4. Plan activities to give your carpet time to dry.

BRUSH SUCTION

Move furniture to another area if cleaning an entire room (optional). Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.

S H TA E R R

ug310-5892_9500_107.indd 9
Before you clean (continued)
5. Pretreating (optional) Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways. Option A: BISSELL Tough Stain PreTreat A. Spray the BISSELL Tough Stain Pre-treat formula onto heavy traffic areas, soiled areas, or stains. B. Allow to penetrate for at least 3 minutes. C. Clean as normal, using the BISSELL ProHeat 2X machine on the high traffic setting, following the instructions below. Option B: CleanShot A. Set Custom Clean for the desired setting. B. Press the CleanShot button and aim the focused stream onto the stain. Allow the formula to soak in for 30 seconds. C. Run the machine over the stain to extract. Repeat as needed until the stain is gone. D. Rinse if desired.
ATTENTION: a Some Berber carpets have
tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see Stain Removal instructions on page 14.

Carpet cleaning

1. Fill the 2-in-1 Water Tank. Remove the tank from the base of the machine by lifting up the tank carry handle. Carry like a bucket to the sink.
1a. Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank. 1b. Remove the top of the tank by lifting up on the handle.
Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together

Lip Groove

(underside of bottom tank)
1c. Fill the heavy duty bladder with clean hot tap water.*Do not boil or microwave water as it can destroy the bladder. 1d. Leaving the filled bottom of the tank on a flat surface, only maneuver the top of the tank. To attach the top part of the tank to the bottom, carefully hook the lip on the top tank into the groove on the bottom tank. 1e. Fasten tanks together by securing the latch in the back.
Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank.
ug310-5892_9500_107.indd 10

1/8/07 2:57:11 PM

Carpet cleaning (continued)
2. Remove formula tank from back of machine.

2. 2a.

2a. Fill the formula tank by first unscrewing the cap and insert. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill formula up to the line and replace the cap and insert. Place formula tank into the slot in the back of the machine for a snug fit. 2b. If using the BISSELL 3X Concentrated Fiber Cleansing Formula: Add 3 capfuls of 3X Concentrated Fiber Cleansing formula to the formula tank, and then fill with warm water to the line. 3. Set Custom Clean Dial. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or water rinse) and the ProHeat 2X will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need. Set ReadyTools Dial to the floor cleaning setting. Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. Allow 1 minute for the built-in heater to warm-up before cleaning. The ProHeat 2X will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning. Cleaning Strokes. While pressing the trigger, make one slow forward wet pass and another one back. Let the built-in heater, formula, and DirtLifter PowerBrushes do the work for you. Caution: Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.
Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker.

FLOOR CLEANING

Power Switch Power Switch Heater Switch
Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you cant see any more water being pulled up.
www.bissell.com 800.237.7691
ug310-5892_9500_107.indd 11
Carpet cleaning (Continued)
After cleaning, you may want to turn the Custom Clean dial to rinse to give your carpeting a final water only rinse. This will ensure thorough removal of embedded dirt loosened by the deep cleaning formula. BISSELL deep cleaning formulas contain an anti-resoiling agent that helps your carpets repel dirt and keeps them looking good longer.

WARNING: and To reduce the risk of fire
electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.
Keep plenty of genuine BISSELL Fiber Cleansing Formula on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty.
Remove the tank from the base of the machine by lifting up on the tank carry handle. Carry like a bucket to a utility sink or outside where you will dispose of the dirty water. 7a. Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank. 7b. Remove the top of the tank by lifting up on the handle.
Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together.
7c. Lift the bottom portion of the tank; pour out dirty water toward the sink through the triangular shaped opening in the corner of the tank.
Note: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before). This debris 7b. should be picked up and thrown away.
7d. Fill the heavy duty bladder with clean hot tap water, following instructions 1c through 1e on pages 9 and 10.
Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. Always check the level of cleaning formula in the formula tank at the same time, and refill as needed.

8. 7d.

Water rinse (Optional). Rinsing is an optional step that can be done during the cleaning process by switching from one of the clean settings on the Custom Clean dial to a water rinse setting, or it can be done after the carpeted area has been cleaned. Simply choose the water rinse setting on the custom clean dial, and follow the same path as you did for cleaning, taking care to do a forward (wet) stroke by depressing the trigger, a backward (wet) stroke, and a forward and backward (dry) stroke, releasing the trigger. Continue this until the water you see coming up the nozzle is clear.
ug310-5892_9500_107.indd 12

1/8/07 2:57:12 PM

9. CleanShot. CleanShot is an optional feature that can be used to fight tough stains. It can be used as either a tough stain pre-treat (see page 10) or can be used during the deep cleaning process itself. To use CleanShot either as a pre-treat or during deep cleaning, follow the instructions below. A. Set Custom Clean for the desired setting. B. Press the CleanShot button and aim the focused stream onto the stain. Allow the formula to soak in for 30 seconds. C. Run the machine over the stain to extract. Repeat as needed until the stain is gone. D. Rinse if desired.

Cleaning with attachments
Your ProHeat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags. A. Check manufacturers tag before cleaning. W or WS on the tag means you can use your ProHeat 2X. If the tag is coded with an X or an S (with a diagonal stripe through it), or says Dry Clean Only, do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturers tag is missing or not coded, check with your furniture dealer. B. Check for colorfastness in an inconspicuous place. C. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet. D. Plan activities to allow upholstery time to dry. E. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds.

Manufacturers tag

bvh g kvh gh j j h d b lg fd hn l kl sd jkn f h Ad bj jh b j cv hh gcg
ug310-5892_9500_107.indd 13

1/8/07 2:57:13 PM

Cleaning with attachments (continued)
2. 3. 4. 5. 6. 7. Follow the instructions on pages 10 & 11 for filling the 2-in-1 water tank and the formula tank. Set ReadyTools dial to the hose attachments setting. This will allow spray and suction from the hose. Set custom clean dial for heavy traffic, normal clean, light clean, or water rinse as desired. Attach the cleaning tool to the end of the hose. Plug in and turn on the power switch and heater (if desired). Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed. Caution: Do no overwet. Remove and rinse tools in clean, running water. Dry and replace in the tool caddy. It is recommended that you suction clean water from the tap to rinse out the hose.
WARNING: To reduce the risk of
injury, be extra careful when cleaning stairs. Make sure machine is secure and level.
10. Before replacing lift end of hose and stretch out to ensure all water is cleared from hose. 11. Coil flex hose around the tool caddy. 12. Empty 2-in-1 water tank and rinse out, following the instructions on page 11. 13. Return ReadyTools dial to floor setting.
WARNING:fire and To reduce the risk of
electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. Non-BISSELL cleaning solutions may harm the machine and void the warranty.

Cleaning fluid section

Keep plenty of genuine BISSELL Fiber Cleansing Formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.
48 oz. BISSELL Fiber Cleansing Formula with Scotchgard Protector item # 0710
48 oz. BISSELL Multi-Allergen Removal Formula with Scotchgard Protector item # 0720
48 oz. BISSELL Pet Odor and Soil Removal Formula with Scotchgard Protector item # 0730
48 oz. BISSELL Natural Orange Extract Formula with Scotchgard Protector item # 0740
43 oz. BISSELL 3X Concentrated Fiber Cleansing Formula with Scotchgard Protector item # 0716 800.237.7691
ug310-5892_9500_107.indd 14

Stain removal

Do Not Delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse. 2. Gently scrape up any semi-solids with a spoon or spatula. Do not use a knife or other utensil with sharp edges because it could damage the carpet or upholstery. If the area has dried, remove the remaining semi-solids and residue with a sweeper or vacuum. Be sure to test any spot removal formulas in an inconspicuous area first. This is important as some dyes and materials could be damaged or discolored by cleaning solvents. If such a change should occur, try a different solution or call a professional. If cleaning on Berber carpeting, gently run your machine over a hidden area. If no fuzzing occurs, continue cleaning in soiled area.
6a. Using the BISSELL Tough Stain PreCleaner, spray evenly over soiled area. Do not overwet. Wait 3-5 minutes. Gently work the solution by blotting area with a clean, damp, color safe cloth.
6b. CleanShot. CleanShot is an optional feature that can
be used to fight tough stains. It can be used as either a tough stain pre-treat (see page 10) or can be used during the deep cleaning process itself. To use CleanShot either as a pre-treat or during deep cleaning, follow the instructions below. A. Set Custom Clean for the desired setting. B. Press the CleanShot button and aim the focused stream onto the stain. Allow the formula to soak in for 30 seconds. C. Run the machine over the stain to extract. Repeat as needed until the stain is gone. D. Rinse if desired.

ug310-5892_9500_107.indd 15

1/8/07 2:57:23 PM

Stain removal (continued)
7. Clean using either the FLOOR CLEANING, or TOOLS setting on the ReadyTools dial.

Hard floor cleaning

Your ProHeat 2X model may have come with a hard floor attachment and Hard Floor Solutions Formula. If not, these products are available for purchase by contacting the BISSELL Consumer Services department by phone or at the website. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. 1. Vacuum or sweep thoroughly to pick up any loose debris and pet hair. 2. 3. Move any furniture, if needed. Empty any carpet cleaning formula back into the BISSELL bottle if stored in the formula tank. Fill formula tank with BISSELL Hard Floor Solutions, available at many retailers, or contact BISSELL Consumer Services. Fill the 2-in-1 water tank with hot tap water and set aside. Attach the hard floor tool onto the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place. Check ReadyTools dial. It should be set on floor cleaning. Set the Custom Clean dial to normal clean. Plug into an outlet and turn the power switch and heater ON ( I ). Slowly move the machine forward and back over hard floor surface one time while depressing trigger. Caution: Do not overwet.
WARNING:fire, To reduce the risk of
electric shock or injury unplug from outlet before servicing.

6. 7. 8. 9.

10. Repeat the motion without pressing the trigger using the hard floor tool to squeegee and suction up the dirty water.
ug310-5892_9500_107.indd 16

1/8/07 2:57:24 PM

Hard floor cleaning (continued)
11. Allow adequate time for floors to dry. 12. Remove hard floor tool, rinse and dry before storing. 13. If any formula remains in the formula tank, pour it back into the Hard Floor Solutions bottle for use the next time. 14. Rinse out the formula tank.

Maintenance and care

Machine storage
Once your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. The formula tank can remain filled and ready to go, or it can simply be emptied back into the formula bottle if that is more convenient.
Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.

Machine care

For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Turn power and heater switches OFF (O). Unplug the machine and wrap the power cord. 2. After emptying the 2-in-1 water tank, rinse it out at a faucet with running hot tap water, taking care to clean underneath the heavy duty bladder, and all around it. The top half of the tank can be rinsed clean through the nozzle area. Also, pop out the red filter underneath the top half of the tank and rinse that out. Replace before putting the top and bottom halves of the tank together. Before you place the cleaned 2-in-1 water tank back onto the machine, simply unscrew the floor nozzle using a Phillips head screwdriver. This can be rinsed out at the faucet. Then replace back onto the machine by starting from the bottom of the nozzle and hooking the tabs into the holes on the bottom sides of the machine. Secure into place with the screw.

Filter

Let all parts dry completely before storing
ug310-5892_9500_107.indd 17

Machine care (continued)

5. The inside of the end caps by the brush rolls can be wiped out with a clean paper towel, or, if a more thorough cleaning is desired, the end caps can be taken off using a Phillips head screwdriver and rinsed clean. Replace after cleaning. Any loose hair or debris can be pulled from the brush rolls and thrown away. For the most thorough clean before storage, follow directions on pages 17 & 18 for removal and replacement of the brush rolls and belts. To clean attachments that may have been used, remove from hose and rinse in clean, running water. Dry and replace attachment in the tool caddy. Clean the hose by suctioning clean water from the tap. Before replacing, lift end of hose and stretch out to ensure all water is cleared from hose. Refer to page 13, illustrations 9 & 10. After carpet is dry, vacuum again to remove hair and fuzz.
WARNING: fire, To reduce the risk of
electric shock or injury, unplug from the outlet before servicing.
Small belt removal and replacement
Occasional replacement of one or both belts may become necessary. If that is needed, please follow the instructions below. 1. Turn off the machine, and unplug it from the outlet. 2. 3. 4. 5. Remove both the 2-in-1 water tank and the formula tank. Set aside. Unscrew the front nozzle and remove it. Set aside. Turn the machine on its side. IMPORTANT: cord side down. Remove the clear end cap by unscrewing the 2 black screws. Take care not to drop the screws into the unit. Remove 1 silver screw. Remove pivot arm by gently lifting up. Remove small brush belt. Replace small brush belt, and reverse steps above.

800.237.7691 8. 9. 6. 7.

ug310-5892_9500_107.indd 18

1/8/07 2:57:25 PM

Brush removal and large belt replacement
Brushes can be removed for cleaning or replacement as needed. 1. Follow small belt removal Instructions on page 17. 2. 3. Remove brush rolls by pulling them off of the metal rods. Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the rod. Be sure to let the rod slide through the bushing to insure proper fit. Re-attach the long belt on the bottom to the cogs of the small roller brushes. Place small belt over back roller and metal cog.

4. 5. 6. 7. 8.

Remedies 1. Set ReadyTools dial to either FLOOR CLEANING or TOOLS setting. 2. Pick up both the 2-in-1 water tank and formula tank and reseat them so they fit snugly on the unit. 3. Check to make sure the "lip" of the nozzle is securely hooked into the groove on bottom of Tank (see page 9). 4. Check fluid levels in heavy duty bladder and formula tank. 5. Empty 2-in-1 water tank. Refill heavy duty bladder with clean hot tap water and replace. 6. Turn the machine OFF ( O ), allowing red float door to release into the open position. Turn unit back ON ( I ) to continue cleaning. Be sure your forward and backward strokes are done at a slower pace.
ug310-5892_9500_107.indd 20
Other maintenance or service not included in the manual should be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services 1-800-237-7691

Monday - Friday Saturday

Or write: BISSELL HOMECARE, INC PO Box 3606 Grand Rapids MI 49501 ATTN: Consumer Services
8 a.m. 10 p.m. EST 9 a.m. 8 p.m. EST
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See Warranty on page 24 for details.
ug310-5892_9500_107.indd 21

1/8/07 2:57:27 PM

Replacement parts - BISSELL ProHeat 2X
Replacement Parts* Below please find a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired.

Part No.

203-6651 203-6652 203-6653 203-6654 203-6655 203-6692 203-6611 203-6660 203-6618 203-6675 203-6676 203-6677 203-6678 203-6679 203-6845 203-6680 203-6681 203-6682 203-6685 203-6686 203-6688 203-6804 203-6689 203-6690 203-6994 710A 720A 730A 222-0400

Part Name

3 Tough Stain Tool Powered TurboBrush Hand Tool 4 Upholstery Tool 6 Stair Tool Spraying Crevice Tool Bare Floor Tool Grey Tank Assembly (complete) for Black unit (Blue or Purple complete tank assemblies available upon request) Grey Tank Lid (Blue or Purple Tank Lids available upon request) Grey Tank Bottom (Blue or Purple Tank Bottoms available upon request) Cap and Insert for Water Tank Formula Tank (includes Cap & Insert for Formula Tank) Cap and Insert for Formula Tank Front Nozzle (includes gasket) Autoload Gasket (fits both Water and Formula Tank) Float Door Tank Filter (Lint Screen) Water Tank Latch Cord Wrap (Black) (Blue or Purple cord wrap available upon request) Clear End Cap w/Edge Brushes (2 pack, includes screws) Brush Roll 6 row (includes 1 brush, axle, 2 swivel arms) Small Brush Belt (non-cord side) Large Brush Belt (cord side) Hose Secure Latch Hose Rack Assembly (Top/Bottom Hose Rack, Screws) CleanShot Cover Fiber Cleansing Formula 48 oz. Multi-Allergen Removal Formula 48 oz. Pet Odor and Soil Removal Formula 48 oz. Natural Orange Extract Formula 48 oz. Lavender Essence Formula 48 oz. 3X Concentrated Fiber Cleansing Formula with Scotchgard Protector 43 oz. Hard Floor Solutions 32 oz. Tough Stain Pretreater 22 oz.

*Not all parts are included with every model.
ug310-5892_9500_107.indd 22
Replacement parts - BISSELL ProHeat 2X (Continued)
ug310-5892_9500_107.indd 23
Warranty - BISSELL ProHeat 2X
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELLs option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part. See information below on "If your BISSELL product should require service". This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Services.
Website or E-mail: www.bissell.com Use the Customer Services tab. Or Call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. - 10 p.m. ET Saturday 9 a.m. - 8 p.m. ET Or write: BISSELL Homecare, Inc. PO Box 3606 Grand Rapids MI 49501 ATTN: Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELLS LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. *EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty lasts, so the 2007 BISSELL Homecare, Inc above limitation may not apply to you. Grand Rapids, Michigan

Easy Carry Handle Heat Indicator Light Tank Carry Handle Ready Tool Dial 2-in-1 Water Tank Lower Base Dry Aire (select models) Easy To Remove Nozzle Edge Sweep Brushes Detent Pedal

Optional Accessories:

These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 26-27.

3 Tough Stain Brush

4 Upholstery Tool

6' Stair Tool

TurboBrush

Hard Floor Attachment

Spraying Crevice Tool
Scotchgard Protector Applicator

ug120-4042_9500E.indd 4

Spray Trigger

Upper Hose Rack

Hose Secure Latch Upper Handle TurboBrush Storage (select models) Crevice Tool Holder (select models)
Lower Hose Rack Lower Handle

Detent Pedal

Formula Tank
Keep plenty of genuine BISSELL deep cleaning formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may harm the machine and void the warranty.

BISSELL Formulas:

1.42 L Multi- Allergen Removal Formula with Scotchgard protector www.bissell.com 1.42 L Fibre Cleansing Formula with Scotchgard protector
1.42 L Pet Odor and Soil Removal Formula with Scotchgard protector
1.42 L Natural Orange Extract Formula with Scotchgard protector
1.42 L Lavender Essence Formula with Scotchgard protector
32 oz. Hard Floor Solutions Formula
8 oz. Scotchgard Protector Post Treatment Cartridge
22 oz. Tough Stain PreCleaner

ug120-4042_9500E.indd 5

How to use this guide
This users guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat 2X. Youll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this user's guide thoroughly before assembling your deep cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this users guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat 2X for many years.

WARNING:

Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
Your ProHeat 2X comes in three, easy to assemble components: Upper Handle Lower Handle Tool Caddy The only thing you will need to assemble your cleaner is a Phillips head screwdriver. 1. 2. 3. 4. Slide upper handle onto lower handle. Screw 3 screws into the marked holes. Place upper hose rack onto back of upper handle and secure with tapered screw.

(located behind 2-in-1 water tank)

Dry Aire

The Dry Aire system spreads hot air across the carpet to aid in drying. The feature runs while your machine is powered. Heated air is distributed from the bottom and back of the machine and blown across the carpet while you clean!

ug120-4042_9500E.indd 7

5/7/08 3:37:42 PM

2-in-1 water tank

Our 2-in-1 water tank full capacity system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate. This allows the user to maximize tank space, yet only carry one tank to and from the sink for emptying and filling.
Easy to remove and clean nozzle
Now, cleaning up your machine after the cleaning process is easier than ever! Simply remove the 2-in-1 water tank and remove the screw to pop out the nozzle for rinsing in the sink. Dirt, loose carpet fibers and remaining pet hair or fuzz get washed away in a snap.

ReadyTools dial

This provides either floor cleaning or above floor cleaning with the turn of a knob. If choosing above floor cleaning for upholstery, stairs, or for those creases close to the baseboards, turn knob to "TOOLS" and choose the attachment appropriate for the job. Attach tool to the flex hose and you are ready to go. Be sure to turn knob back to "FLOOR CLEANING" when done.

F CL LOOR G EANIN

Scotchgard Protector
Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers deep cleaning formulas with Scotchgard protector and a post-applicator to apply Scotchgard protector with the same materials used by carpet mills. This offers extra protection against dirt and tough stains to keep your carpets looking good longer. To maintain your Scotchgard 5-year limited stain warranty, you no longer are required to hire a professional. By using your BISSELL ProHeat machine with BISSELL formulas containing Scotchgard protector every 12 months, your carpet warranty from 3M remains in effect. No other home deep cleaning system can do this for you. Refer to the Scotchgard protector warranty for details.

ug120-4042_9500E.indd 8

Operation

Before you clean

1. 2. 3. 4. Plan activities to give your carpet time to dry. Move furniture to another area if cleaning an entire room (optional). Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. Pretreating Pretreating with BISSELL Tough Stain Precleaner improves cleaning effectiveness and is recommended for heavily soiled carpet in high traffic areas such as entryways and hallways. A. Spray the BISSELL Tough Stain Precleaner formula onto heavy traffic areas, soiled areas, or stains. B. Allow to penetrate for at least 3 minutes. C. Clean as normal, using the BISSELL ProHeat 2X machine on the high traffic setting, following the instructions on pages 10-12.

BRUSH SUCTION

S H TA E R R
ATTENTION: a Some Berber carpets have
tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see Stain Removal instructions on page 15.

5/7/08 3:37:43 PM

ug120-4042_9500E.indd 9

Carpet cleaning

1. Fill the 2-in-1 Water Tank. Remove the tank from the base of the machine by lifting up the tank carry handle. Carry like a bucket to the sink.

1. 1a.

1a. Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank. 1b. Remove the top of the tank by lifting up on the handle.
Note: Be sure to note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together

1b. 1c.

1c. Fill the heavy duty bladder with clean hand hot tap water. *Do not boil or microwave water as it can destroy the bladder. 1d. Leaving the filled bottom of the tank on a flat surface, only maneuver the top of the tank. To attach the top part of the tank to the bottom, carefully hook the lip on the top tank into the groove on the bottom tank. 1e. Fasten tanks together by securing the latch in the back.
Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank.

Lip Groove

(underside of bottom tank)
Remove formula tank from back of machine.
2a. Fill the formula tank by first unscrewing the cap and insert. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill formula up to the line and replace the cap and insert. Place formula tank into the slot in the back of the machine for a snug fit. 3. Set Custom Clean Dial. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean or water rinse) and the ProHeat 2X will adjust the right amount of cleaning formula to mix with the heated water to fit your cleaning need. Set ReadyTools Dial to the floor cleaning setting.

FLOOR CLEANING

ug120-4042_9500E.indd 10

5/7/08 3:37:44 PM

Carpet cleaning (continued)
5. Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. Allow 1 minute for the built-in heater to warm-up before cleaning. The ProHeat 2X will be fully warmed and will provide optimal performance after one minute of continuous heated cleaning. Cleaning Strokes. While pressing the spray trigger, make one slow forward wet pass and another one back. Let the built-in heater, formula, and DirtLifter PowerBrushes do the work for you. Caution: Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.
Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker.
Power Switch Power Switch Heater Switch
Release the spray trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. Repeat cleaning passes pressing the spray trigger until solution being pulled up appears clean. Continue passes without pressing the spray trigger until you cant see any more water being pulled up. After cleaning, you may want to turn the Custom Clean dial to water rinse to give your carpeting a final water only rinse. This will ensure thorough removal of embedded dirt loosened by the deep cleaning formula. BISSELL deep cleaning formulas contain an anti-resoiling agent that helps your carpets repel dirt and keeps them looking good longer.
WARNING:fire and To reduce the risk of
electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner.
Keep plenty of genuine BISSELL deep cleaning formula and Scotchgard protector cartridges on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may harm the machine and void the warranty.
Remove the tank from the base of the machine by lifting up on the tank carry 8. handle. Carry like a bucket to a utility sink or outside where you will dispose of the dirty water. 8a. Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank.

ug120-4042_9500E.indd 11

8b. Remove the top of the tank by lifting up on the handle.
Note: Be sure to note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together.

8c. Lift the bottom portion of the tank and pour out dirty water toward the sink through the triangular shaped opening in the corner of the tank.
Note: You may notice hair and debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up and thrown away.
8d. Fill the heavy duty bladder with clean hand hot tap water, following instructions 1c through 1e on page 10.
Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. Always check the level of cleaning formula in the formula tank at the same time, and refill as needed.
Water rinse (optional). Rinsing is an optional step that can be done during the cleaning process by switching from one of the clean settings on the Custom Clean dial to a water rinse setting, or it can be done after the carpeted area has been cleaned. Simply choose the water rinse setting on the Custom Clean dial and follow the same path as you did for cleaning, taking care to do a forward (wet) stroke by pressing the spray trigger, a backward (wet) stroke, and a forward and backward (dry) stroke, releasing the spray trigger. Continue this until the water you see coming up the nozzle is clear.

ug120-4042_9500E.indd 12

Cleaning with attachments
Your ProHeat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags. A. Check manufacturers tag before cleaning. W or WS on the tag means you can use your ProHeat 2X. If the tag is coded with an X or an S (with a diagonal stripe through it), or says Dry Clean Only, do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturers tag is missing or not coded, check with your furniture dealer. B. Check for colorfastness in an inconspicuous place. C. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet. D. Plan activities to allow upholstery time to dry. E. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds. 2. Follow the instructions on pages 10 for filling the 2-in-1 water tank and the formula tank. 3. 4. 5. 6. 7. Set ReadyTools dial to the tools setting. This will allow spray and suction from the hose. Set Custom Clean dial for heavy traffic, normal clean or light clean as desired. Attach the desired cleaning tool to the end of the hose. Plug in and turn the power switch and heater switch (if desired) to the ON ( I ) position. Clean by pressing the spray trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the spray trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Water rinse (optional) and suction as needed. Caution: Do no overwet.

Manufacturers tag

WARNING: To reduce the risk of
injury, be extra careful when cleaning stairs. Make sure machine is secure and level.
bvh g kvh gh j j h d b lg fd hn l kl sd jkn f h Ad bj jh b j cv hh gcg

ug120-4042_9500E.indd 13

Cleaning with attachments (continued)
8. 9. Remove and rinse tools in clean, running water. Dry and replace in the tool caddy. It is recommended that you suction clean water from the tap to rinse out the hose.
10. Before replacing, lift end of hose and stretch out to ensure all water is cleared from hose. 11. Coil hose around the tool caddy. 12. Empty 2-in-1 water tank and rinse out, following the instructions on pages 11 & 12. 13. Return ReadyTools dial to floor setting.
WARNING:fire To reduce the risk of
and electric Shock due to internal component damage, use only BISSELL deep cleaning formulas intended for use with the deep cleaner. Non-BISSELL cleaning solutions may harm the machine and void the warranty.

Cleaning formula section

Keep plenty of genuine BISSELL advanced deep cleaning formula for full size machines on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.
1.42 L Fibre Cleansing Formula with Scotchgard protector
1.42 L Multi- Allergen Removal Formula with Scotchgard protector

ug120-4042_9500E.indd 14

5/7/08 3:37:45 PM

Stain removal

Do Not Delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse. 2. Gently scrape up any semi-solids with a spoon or spatula. Do not use a knife or other utensil with sharp edges because it could damage the carpet or upholstery. If the area has dried, remove the remaining semi-solids and residue with a sweeper or vacuum. Be sure to test any spot removal formulas in an inconspicuous area first. This is important as some dyes and materials could be damaged or discolored by cleaning solvents. If such a change should occur, try a different formula or call a professional. If cleaning on Berber carpeting, gently run your machine over a hidden area. If no fuzzing occurs, continue cleaning in soiled area.

fire and electric shock due to internal component damage, use only BISSELL deep cleaning formula intended for use with the deep cleaner. Non-BISSELL cleaning formula may harm the machine and void the warranty.
6a. Using the BISSELL Tough Stain PreCleaner, spray evenly over soiled area. Do not overwet. Wait 3-5 minutes. Gently work the solution by blotting area with a clean, damp, color safe cloth. 6b. Using your Proheat 2X with one of the tools attached to the hose, set the Ready Tools dial to the tools setting and the Custom Clean dial to the heavy traffic setting. Spray the area with cleaning formula and allow the BISSELL deep cleaning formula to penetrate for 3-5 minutes. Then, using the attached tool, gently scrub the stain with back and forth strokes. 7. Allow time to dry. Some difficult stains may require a second treatment.

5/7/08 3:37:47 PM

ug120-4042_9500E.indd 15

Hard floor cleaning

Your ProHeat 2X model may have come with a hard floor attachment and Hard Floor Solutions formula. If not, these products are available for purchase by contacting the BISSELL Consumer Services department by phone. The hard floor tool provides effective cleaning for linoleum, vinyl and tile floors. Caution: Do not use on unsealed hardwood floors. 1. Vacuum or sweep thoroughly to pick up any loose debris and pet hair. 2. 3. Move any furniture, if needed. Empty any carpet cleaning formula back into the BISSELL bottle if stored in the formula tank. Fill formula tank with BISSELL Hard Floor Solutions. Fill the 2-in-1 water tank with hand hot tap water and set aside. Attach the hard floor tool onto the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place. Check ReadyTools dial. It should be set on floor cleaning. Set the Custom Clean dial to normal clean. Plug into an outlet and turn the power and heater switches to the ON ( I ) position. Slowly move the machine forward and back over hard floor surface one time while pressing spray trigger. Caution: Do not overwet.
WARNING:fire, To reduce the risk of
electric shock or injury unplug from outlet before servicing.

6. 7. 8. 9.

10. Repeat the motion without pressing the spray trigger, using the hard floor tool to squeegee and suction up the dirty water. 11. Allow adequate time for floors to dry. 12. Remove hard floor tool, rinse and dry before storing. 13. If any formula remains in the formula tank, pour it back into the Hard Floor Solutions bottle for use the next time. 14. Rinse out the formula tank.

ug120-4042_9500E.indd 16

Post-treatment Scotchgard Protector (optional)

Some models are equipped with a Scotchgard protector post-treatment applicator and cartridge. Use this, along with one of the BISSELL deep cleaning formulas containing Scotchgard, to help retain the carpet cleanliness achieved with the ProHeat 2X machine. For best results, the post cleaning treatment should be applied while the carpet is still damp. It is recommended that the Scotchgard protector be applied every 12 months to all clean carpeted areas and after every deep cleaning for high traffic areas such as entryways and stairs. 1. Immediately after cleaning and water rinsing your carpets, empty the 2-in-1 water tank and refill the heavy duty bladder with clean hand hot tap water. 2. 3. Set Ready Tools dial to the tools setting. Purge the hose to eliminate cleaning formula from the tube by spraying clean water through the flex hose (without attachments) into a sink for 15-30 seconds. Attach Scotchgard protector post-treatment cartridge to the applicator tool, following the instructions on the cartridge. Attach the combined tool/cartridge to the hose. The water from the 2-in-1 water tank will automatically mix with the concentrated Scotchgard protector post-treatment formula contained in the cartridge. Turn the Custom Clean dial to the water rinse setting. Before applying Scotchgard protector to a large area, test in a small, hidden area for colorfastness. Examine area when dry. If color is affected, do not use. For use on upholstery, look for manufacturers cleanability code tag. Use only on fabrics coded W or WS. If coded S or X, do not use. Not recommended for use on velvet, silk vinyl, leather or 100% cotton upholstery. Apply Scotchgard protector in a slow sweeping motion with a slight overlap of the treated area. For best coverage, follow the guide on the cartridge. One 8 oz. cartridge protects 200 square feet (18.6 sq. meters). This is equal to two average size rooms, (each at 10 x 10 ft. or 3 x 3 meters). Periodically check the level in the bottle to ensure the best coverage.
If clogged, soak applicator tool in hand hot tap water before using.

5/7/08 3:37:48 PM

ug120-4042_9500E.indd 17
Post-treatment Scotchgard Protector (optional) continued
9. Be careful not to spray the Scotchgard protector onto furniture or fabric that has not been tested for colorfastness. If this does occur, wipe off the Scotchgard protector. 10. When finished remove the cartridge from the applicator tool. If formula is left, replace the cap to the cartridge and store at room temperature for later use. 11. With the applicator tool still on the end of the flex hose, spray clean hand hot tap water into the sink to avoid any future clogging. Let dry before storing.

Maintenance and care

Machine storage
Once your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. The formula tank can remain filled and ready to go, or it can simply be emptied back into the formula bottle if that is more convenient.

Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.

ug120-4042_9500E.indd 18

Machine care
For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Turn power and heater switches to the OFF ( O ) position. Unplug the machine and wrap the power cord. 2. After emptying the 2-in-1 water tank, rinse it out at a faucet with running hand hot tap water, taking care to clean underneath the heavy duty bladder and all around it. The top half of the tank can be rinsed clean through the nozzle area. Also, pop out the red filter underneath the top half of the tank and rinse that out. Replace before putting the top and bottom halves of the tank together. Before you place the cleaned 2-in-1 water tank back onto the machine, simply unscrew the floor nozzle using a Phillips head screwdriver. This can be rinsed out at the faucet. Then replace back onto the machine by starting from the bottom of the nozzle and hooking the tabs into the holes on the bottom sides of the machine. Secure into place with the screw.

Filter

Let all parts dry completely before storing

ug120-4042_9500E.indd 19

Machine care (continued)
5. The inside of the end caps by the brush rolls can be wiped out with a clean paper towel or, if a more thorough cleaning is desired, the end caps can be taken off using a Phillips head screwdriver and rinsed clean. Replace after cleaning. Any loose hair or debris can be pulled from the brush rolls and thrown away. For the most thorough clean before storage, follow directions on pages 21 & 22 for removal and replacement of the brush rolls and belts. To clean attachments that may have been used, remove from hose and rinse in clean, running water. Dry and replace attachment in the tool caddy. Clean the hose by suctioning clean water from the tap. Before replacing, lift end of hose and stretch out to ensure all water is cleared from hose. Refer to page 14, illustrations 9 & 10. After carpet is dry, vacuum again to remove hair and fuzz.
WARNING: fire, To reduce the risk of
electric shock or injury, unplug from the outlet before servicing.

ug120-4042_9500E.indd 20

Small belt removal and replacement
Occasional replacement of one or both belts may become necessary. If that is needed, please follow the instructions below. 1. Turn off the machine and unplug it from the outlet. 2. 3. 4. Remove both the 2-in-1 water tank and the formula tank. Set aside. Unscrew the nozzle and remove it. Set aside. Turn the machine on its side. IMPORTANT: Make sure that the cord side is down. Remove the clear end cap by unscrewing the 2 black screws. Take care not to drop the screws into the unit. Remove 1 silver screw. Remove pivot arm by gently lifting up. Remove small brush belt.

4. 5. 3. 2.

Replace small brush belt and reverse steps above.

ug120-4042_9500E.indd 21

Brush removal and large belt replacement
Brushes can be removed for cleaning or replacement as needed. 1. Follow small belt removal instructions on page 21. 2. 3. Remove brush rolls by pulling them off of the metal rods. Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the rod. Be sure to let the rod slide through the bushing to insure proper fit. Re-attach the long belt on the bottom to the cogs of the small roller brushes. Place small belt over back roller and metal cog. Place pivot arm in place and screw in place using the silver screw. Re-attach clear end cap by tightening with the (2) black screws. Return front nozzle to front of unit by latching from underneath and then securing with a screw. If you have any questions or are having trouble installing or replacing your belt(s) or brushes, please call BISSELL Consumer Services.

4. 5. 6. 7. 8.

ug120-4042_9500E.indd 22

5/7/08 3:37:49 PM

Troubleshooting
Built-in heater ready light does not illuminate

Possible Cause Remedies

1. The heater switch is not turned ON ( I ). 2. The power switch is not turned ON ( I ).
1. Turn the heater switch ON ( I ). 2. Both switches must be ON ( I ) to activate the heater ready light.

Remedies

Reduce Spray or No Spray

Possible Cause

1. 2-in-1 water tank may be empty. 2. Formula tank may be empty. 3. 2-in-1 water tank may not be seated completely. 4. Pump may have lost prime.
1. Fill heavy duty bladder with hand hot tap water. 2. Fill formula tank with BISSELL deep cleaning formula. 3. Turn power switch OFF ( O ). Remove and reseat tank. 4. Turn power switch OFF ( O ) and then back ON ( I ). Wait one minute, then press spray trigger.
DirtLifter PowerBrushes do not turn
1. The brush belt is off or broken.
1. Turn power switch OFF ( O ) and unplug unit from outlet. Follow instructions on pages 21 & 22. 2. Brushes only rotate when unit is reclined using the detent pedal.
2. The unit is in the upright position.

For Australian inquiries: Monday - Friday 9 am 5 pm BISSELL AUSTRALIA PTY LIMITED Unit Ricketts Road Mount Waverley, Victoria 3149 Australia Telephone: 1-800-811-183
For all other inquiries: Monday - Friday 8 am 4 pm BISSELL Homecare, Inc. PO Box 1888 Grand Rapids, MI 49501 USA Telephone: 01-616-453-4451 Fax: 01-616-453-1383
Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See Warranty on page 28 for details. Please do not return this product to the store.

ug120-4042_9500E.indd 25

Replacement parts - BISSELL ProHeat 2X
Below is a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired.

Part No.

203-6651 203-6652 203-6653 203-6654 203-6655 203-6692 203-6691 203-6611 203-6660 203-6618 203-6601 203-6675 203-6676 203-6677 203-6678 203-6679 203-6845 203-6680 203-6681 203-6682 203-6685 203-6686 203-6688 203-6804 203-6689 203-6690 710E 720E 730E 740E 750E 4001

Part Name

3 Tough Stain Tool Powered TurboBrush Hand Tool 4 Upholstery Tool 6 Wide Stair Tool Spraying Crevice Tool Hard Floor Tool Scotchgard Applicator Tool Grey Tank Assembly (complete) for Black unit (Blue or Purple complete tank assemblies available upon request) Grey Tank Lid (Blue or Purple Tank Lids available upon request) Grey Tank Bottom (Blue or Purple Tank Bottoms available upon request) Hose Assembly Cap and Insert for Water Tank Formula Tank (includes Cap & Insert for Formula Tank) Cap and Insert for Formula Tank Front Nozzle (includes gasket) Autoload Gasket (fits both Water and Formula Tank) Tank Filter (Lint Screen) Filter with Door Water Tank Latch Cord Wrap (Black) (Blue or Purple cord wrap available upon request) Clear End Cap w/Edge Brushes (2 pack, includes screws) Brush Roll 6 row (includes 1 brush, axle, 2 swivel arms) Small Brush Belt (non-cord side) Large Brush Belt (cord side) Hose Secure Latch Hose Rack Assembly (Top/Bottom Hose Rack, Screws) 1.42 L Fiber Cleansing Formula with Scotchgard protector 1.42 L Multi-Allergen Removal Formula with Scotchgard protector 1.42 L Pet Odor and Soil Removal Formula with Scotchgard protector 1.42 L Natural Orange Extract Formula with Scotchgard Protector 1.42 L Lavender Essence Formula with Scotchgard protector 32 oz. Hard Floor Solutions Scotchgard Protector Post Treatment Cartridge Tough Stain Pre Cleaner

2008 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 120-4042 Rev 5/08 Visit our website at: www.bissell.com Scotchgard is a trademark of 3M

ug120-4042_9500E.indd 28

5/7/08 3:37:54 PM