L1 Compact Covers_320042_00.fm Page 1 Thursday, December 11, 2008 4:19 PM

L1 Compact

Portable Line Array System
Owners Guide Gua de usario Notice dutilisation
2009 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM317638 Rev.00 www.Bose.com/musicians
Cajun_In-Guide_QSG.fm Page 1 Tuesday, December 16, 2008 10:36 AM
Quick setup guide Gua rpida de instalacin Notice de montage
Cajun_In-Guide_QSG.fm Page 2 Tuesday, December 16, 2008 10:36 AM
CajunOG.book Page 2 Tuesday, December 16, 2008 10:13 AM

English

SAFETY INFORMATION
Please read this owners guide
Please take the time to follow the instructions in this owners guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this owners guide for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the system to rain or moisture. WARNING: To reduce the risk of electric shock, do not disassemble this system unless you are qualified. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical shock. The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the presence of important operating and maintenance instructions in this owners guide. CAUTION: This product shall be connected to a mains socket outlet with a protective earthing connection. CAUTION: Make no modifications to the system or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance. CAUTION: Do not place any naked flame sources, such as lighted candles, on or near the apparatus. CAUTION: Where the mains plug is used as the disconnect device, such disconnect device shall remain readily operable. Note: The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats. This product conforms to the EMC Directive 2004/108/EC and to the Low Voltage Directive 2006/95/EC. The complete Declaration of Conformity can be found at www.Bose.com/static/compliance/index.html. WARNING: Do not expose this apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on or near the apparatus As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard. Japan only: Note: Provide an earth connection before the main plug is connected to the mains.
2009 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission.
Cajun_SafetyInstructions.fm Page 3 Tuesday, January 6, 2009 2:40 PM

TAB 4, 11

TAB 5, 12

TAB 2, 9, 16

TAB 1, 8, 15
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. 16. Do not let objects or liquids enter the product as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. 17. See product enclosure for safety-related markings. 18. Use proper power sources Plug the product into a proper power source, as described in the operating instructions or as marked on the product. 19. Apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus. 20. No naked flame source, such as lighted candles, should be placed on or near the apparatus. 21. Power LED Indicates power status. Blue: Power on.

Information about products that generate electrical noise
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This product complies with the Canadian ICES-003 Class A specifications.
CajunOG.book Page ii Tuesday, December 16, 2008 10:13 AM

TAB 3, 10

CONTENTS

INTRODUCTION

Welcome. Features and benefits. Product overview.

SYSTEM SETUP

System configurations. Setting up the system. Setting up in the collapsed position. Setting up in the extended position. Extending the Loudspeaker Array. Connecting power to the system.

OPERATING INFORMATION

Connections and controls. Rear panel outputs. Plugging in your sources. Setting the Channel 1 (microphone) controls. Setting the Channel 2 controls. Applying the acoustic guitar ToneMatch preset. Connection scenarios. Classroom. Presentations. Solo musical performances. DJ events. Advanced setup using the T1 ToneMatch audio engine. Single musician. Multiple musicians. Mixed setup.

CARE AND MAINTENANCE

Caring for your product. Cleaning. Troubleshooting. Bose Community Message Board. Getting service. Accessories. Limited Warranty and Registration. What you must do to obtain Limited Warranty Service:. Technical Information. Mechanical. Electrical. Audio Input/Output.
CajunOG.book Page 1 Tuesday, December 16, 2008 10:13 AM

Welcome

Thank you for purchasing the Bose L1 Compact Portable Line Array System. Whether you are a musician amplifying your instruments, a mobile DJ entertaining an audience, or the host of your own special event, this system will provide quality sound for audiences of approximately 100 people. This owners guide provides detailed setup and operating instructions for your L1 Compact system and explains how to connect to a variety of audio sources. For additional information on using this system, including tips, techniques, and frequently asked questions, please visit www.Bose.com/musicians on the Internet.

Features and benefits

Carry it in one trip The entire system is light enough to be carried in a single trip. Set it up in one minute The interlocking components of the L1 Compact system allow system setup in less than a minute. There are no external speaker wires required. An integrated bass enclosure with an intuitive user interface eliminates the need for separate components. Fill the room with one loudspeaker Whether youre performing live or playing back prerecorded music, whether youre performing in a coffeehouse or a 100-seat room, Bose Spatial Dispersion loudspeaker technology provides nearly 180 of tonally balanced sound coverage so there are no dead spots. PA and monitor combined Audience members enjoy a more consistent and intimate listening experience because the system sets up behind the performer and serves as both the monitor for the stage and amplification system for the audience. The performer alone controls the sound. Versatility In addition to musical performances, the L1 Compact provides quality sound for a wide variety of general-purpose uses including presentations, celebrations, speeches, and music playback for about 100 people. Integrated ToneMatch signal processing Provides a high level of tone customization on your microphone or instrument to provide a listening experience that most musicians only achieve using a recording studio. Two setup options The L1 Compact system can be used in either the collapsed position for smaller audiences or extended positions for larger audiences.

Product overview

The L1 Compact Portable Line Array System is shipped in two cartons. Carefully unpack the cartons and check that you have all the items listed on this page. WARNING: To avoid danger of suffocation, keep the plastic bags out of the reach of children. The L1 Compact system consists of: L1 Compact Power Stand L1 Compact Loudspeaker Array L1 Compact Extensions The L1 Compact system comes with a slipcover for the Power Stand and a padded carry bag for the L1 Compact Extensions. Power stand carton
L1 Compact Power Stand with Loudspeaker Array

Extensions carton

L1 Compact Extensions

Loudspeaker Array

AC power cord

Extensions carry bag

Power Stand slipcover
For a complete list of optional equipment and accessories, please visit: www.Bose.com/musicians.
CajunOG.book Page 3 Tuesday, December 16, 2008 10:13 AM

System configurations

You can set up the versatile L1 Compact system in two unique positions. The examples below will help you quickly identify the position that can work best for you.
Collapsed position Extended position Loudspeaker Array
Tabletop Power Stand Loudspeaker Array

Extension

Extension Power Stand
Smaller audiences Intimate acoustic performances Music playback Presentations Speeches
Larger audiences Musical performances auditorium/coffeehouse DJ events Announcements larger spaces
The L1 Compact Extensions are not required when using the L1 Compact Portable Line Array System in the collapsed position. They are included for situations where you need to elevate the Loudspeaker Array to project sound to larger audiences.
CajunOG.book Page 4 Tuesday, December 16, 2008 10:13 AM

Setting up the system

Before making any connections, you should set the L1 Compact Portable Line Array System up either in the collapsed position (the system is shipped in the collapsed position) or the extended position.
Setting up in the collapsed position
To get the most sound quality and ensure that seated audience members enjoy the full frequency range of the system, position it on a table (shown above) at ear-level or at the front edge of a stage (not shown). This will allow sound to project clearly and evenly throughout the audience.
Setting up in the extended position
In larger rooms, or with larger audiences where the sound could be blocked by obstacles, it is best to set up the L1 Compact Portable Line Array System in the extended position.
CajunOG.book Page 5 Tuesday, December 16, 2008 10:13 AM

SYSTEM SETUP Extending the Loudspeaker Array
Once you have set the system in place: 1. Slide the Loudspeaker Array up and out of the Power Stand and temporarily lay it aside. Note: The two L1 Compact Extensions are identical to each other. Either one can be used on the top or bottom, but if one extension is used, both must be used. 2. Align the plug on the bottom of the Extension with the socket on the Power Stand, then slide the extension into the power stand. Be sure to fully insert the extension into the Power Stand socket to assure stability and a good connection.
3. Align the remaining Extension and push it firmly in place. 4. Align the Loudspeaker Array and push it firmly in place.
Connecting power to the system
1. Make sure the power switch is off (down position). 2. Plug one end of the power cord into the connector on the power stand. 3. Plug the other end into a live electrical receptacle.
4. Before turning the system on, connect your sound sources. See Operating Information on page 6, and Plugging in your sources on page 7.
Cajun_AppOperation.fm Page 6 Tuesday, January 6, 2009 3:05 PM

Connections and controls

The power stand control panel provides all the necessary connectors, controls, and indicators for operation.
Channel 1 (Microphone input) The channel 1 input is for use only with a microphone. Integrated ToneMatch signal processing provides a high level of tone customization to provide a listening experience that most musicians can only achieve using a recording studio. 1. Signal/Clip indicator Displays the input signal status in color. Green: Input signal present Red: Input signal clipping 2. Volume control Adjusts the volume of your microphone.
Channel 2 (Utility channel multiple input) 6. Signal/Clip indicator Displays the input signal status in color. Green: Input signal present Red: Input signal clipping 7. Volume control Adjusts the overall volume of all input sources connected to Channel 2.
8. -inch stereo input Balanced analog input for connecting audio sources such as portable mp3 players, satellite radio, laptop computers, video projectors, and smart boards. 9. RCA stereo input Analog input for connecting audio sources such as DVD players, VCR players, video game consoles, DJ mixers, Keyboards and other instruments. For best results, connect both the left and right signals. 10. -inch input Balanced analog input for connecting guitars and other instruments. Accepts either -inch TRS balanced or TS unbalanced cables.
3. Treble control Adjusts the amount of treble on your microphone.
4. Bass control Adjusts the amount bass on your microphone.
11. ToneMatch switch When connecting an 5. Microphone input Analog input for acoustic guitar to the -inch input, move the connecting a balanced XLR microphone cable. switch to the position to enable a A ToneMatch microphone preset is built in. ToneMatch preset. When connecting anything other than an acoustic guitar to the -inch input, move the switch down to the Line Level position. 12. Power LED Indicates power status. Blue: Power on

Cajun_AppOperation.fm Page 7 Tuesday, December 16, 2008 11:18 AM

-inch output RCA output

Rear panel outputs
-inch output Mono analog output that accepts either inch TRS balanced or TS unbalanced cables. Can be used to link multiple L1 Compact systems together by connecting the -inch output from one L1 Compact system to the -inch input (Channel 2) on a second L1 Compact system. This will provide additional coverage in larger spaces. You can also use the -inch output to connect to a house PA system and use the L1 Compact system as your personal monitor. Note: Using a TS unbalanced cable will result in a drop in the audio level of -6dBu.

TRS TS

RCA output Mono line level analog output for connecting audio devices such as CD recorders and flash recorders. For best results, connect both the left and right signals.

Left Right

Plugging in your sources
Before plugging in a sound source, adjust the channels Volume control fully counterclockwise.
Cajun_AppOperation.fm Page 8 Tuesday, December 16, 2008 11:18 AM
Setting the Channel 1 (microphone) controls
Channel 1 is only intended for use with a dynamic handheld microphone. Do not connect any other sources to this input. 1. Before using the microphone, adjust the Channel 1 Volume control fully counterclockwise. 2. While speaking into the microphone, adjust the Volume control to the desired level. For best results, keep the microphone close to your lips when speaking. Holding the microphone more than 3 inches (7.6 cm) away from your lips when speaking will lead to less overall volume and may impact overall clarity.
The Channel 1 Microphone Input is equipped with an integrated ToneMatch preset to automatically optimize the sound of your microphone. 3. Adjust the Treble and Bass controls to make further refinements based on your personal preference.
Setting the Channel 2 controls
When connecting an audio source to any of the Channel 2 inputs, follow these steps to adjust the volume. 1. On the power stand, adjust the Channel 2 Volume control fully counterclockwise. 2. Connect the audio source to the appropriate Channel 2 input.
3. Turn the Channel 2 Volume control clockwise until the volume indicator glows green or yellow. If the volume indicator steadily glows red, decrease the volume. Note: You can connect multiple audio sources, one to each of the Channel 2 Inputs, at the same time. However, you must then adjust the volume on each source device to achieve the mix you desire.

CajunOG.book Page 9 Tuesday, December 16, 2008 10:13 AM
OPERATING INFORMATION Applying the acoustic guitar ToneMatch preset
You can access the ToneMatch preset by plugging into the -inch input on Channel 2 and moving the ToneMatch switch to the position. The ToneMatch preset is designed specifically for use with an acoustic guitar.
Note: The ToneMatch preset switch only affects the -inch input. Sound from devices connected to the -inch stereo input and the RCA stereo input are not affected.

Connection scenarios

There are many ways to connect and use the L1 Compact system. The following pages show a few examples of typical scenarios.

Classroom

A typical setup scenario for a classroom could include a DVD player connected to the L1 Compact system.
CajunOG.book Page 10 Tuesday, December 16, 2008 10:13 AM
OPERATING INFORMATION Presentations
Connect the audio output from your laptop computer and deliver multimedia presentations.
Within auditoriums, the setup could include two L1 Compact systems, several microphones, and a small mixer.

Wireless Wired

CajunOG.book Page 11 Tuesday, December 16, 2008 10:13 AM
OPERATING INFORMATION Solo musical performances
The multiple inputs on the L1 Compact system allow a soloist to connect a vocal microphone, musical instrument, and backing tracks.

DJ events

DJs use multiple input sources (CD player, MP3 player, etc.) plugged into a mixer. In this scenario, two mixer outputs are fed into two L1 Compact systems for stereo sound.
CajunOG.book Page 12 Tuesday, December 16, 2008 10:13 AM
OPERATING INFORMATION Advanced setup using the T1 ToneMatch audio engine
For more demanding performances, a musician can add the optional T1 ToneMatch audio engine to his or her setup. The T1 offers expanded inputs and outputs, access to quality effects, dynamics processing, and our most advanced tone-shaping library. In addition, the T1 ToneMatch audio engine provides additional input/output capabilities. The optional T1 ToneMatch audio engine requires the optional power supply. To learn more about the T1 ToneMatch audio engine, please visit www.Bose.com/musicians.

Single musician

A single musician could add a microphone and T1 ToneMatch audio engine to their setup.
CajunOG.book Page 13 Tuesday, December 16, 2008 10:13 AM
OPERATING INFORMATION Multiple musicians
In this scenario, a keyboard-guitar duo sings and plays through a single T1 ToneMatch audio engine and an L1 Compact system.

Mixed setup

A more elaborate multiple musician setup could be as shown below. This scenario employs two L1 Compact systems and a T1 ToneMatch audio engine.
Cajun_Care+Maint.fm Page 14 Tuesday, December 23, 2008 1:08 PM

Caring for your product

Cleaning
Clean the product enclosures using only a soft, dry cloth. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. Do not use any sprays near the product or allow liquids to spill into any openings. If necessary, you may carefully vacuum the grille of the L1 Compact Power Stand.

Troubleshooting

If you experience problems while using this product, try the following solutions. Recommended troubleshooting tools Spare AC power cord XLR and -inch phone plug cables

Problem What to do

System is plugged Make sure you are using the included L1 Compact Power Stand power cable. in, power switch is Make sure the power cable is fully engaged into both the Power Stand and the AC outlet. on, but power LED Make sure you have power at the AC outlet. Try operating a lamp or other equipment is off from the same AC outlet. Try a different power cable. If available, try a different Power Stand. Power LED is on, but no sound Make sure the Volume control is turned up on the Power Stand. Make sure the volume control is turned up on your instrument. Make sure your instrument or audio source is plugged into the appropriate input jack. Connect your instrument or audio source to the Power Stand using a different cable.
When in the collapsed position, always place the system on a tabletop so it is level with Middle to high the listeners ears. frequencies absent from the L1 Make sure the L1 Compact Extensions and L1 Compact Loudspeaker Array are firmly Compact seated in their connectors. Loudspeaker Array Make sure connections are not bent or broken. Try cleaning the contacts on the loudspeaker top and bottom with electronic contact spray cleaner. Instrument or audio Lower the volume of the connected audio source. source sounds If you are connecting an external mixer, make sure the equalization controls for low, mid, distorted and high on the mixer are set to mid position. Reduce the output of the mixer. Microphone is encountering feedback Position the microphone so it is not pointing directly at its respective L1 Compact Loudspeaker array. Try positioning the microphone so it nearly touches your lips. Try a different microphone. Try a different position for the L1 Compact Portable Line Array System and/or vocalist on stage. Increase the distance from the loudspeaker to the microphone. If using a vocal effects processor, make sure it is not contributing to the feedback.
Cajun_Care+Maint.fm Page 15 Tuesday, December 23, 2008 1:08 PM
CARE AND MAINTENANCE Bose Community Message Board
To interact with other L1 product owners and for tips on getting the most out of your L1 Compact Portable Line Array System, please visit the Bose Musicians Community Message Board at: http://Bose.infopop.cc/eve.

Getting service

For additional help in solving problems, contact the Bose Live Music Customer Service Product and Technical Support Team at (877) 335-2673 or visit our support area online at www.Bose.com/musicians.

Accessories

Visit www.Bose.com/musicians, or call (800) 905-0886 for accessory information.
Cajun_Care+Maint.fm Page 16 Tuesday, December 23, 2008 1:08 PM
Limited Warranty and Registration
Your L1 Compact Portable Line Array System is covered by a limited transferable warranty. Details of the limited warranty are provided on the product registration card that is included in the carton. Please refer to the card for instructions on how to register. Failure to register will not affect your limited warranty rights.
What you must do to obtain Limited Warranty Service:
Return product, with proof of purchase from an authorized Bose dealer, using the following procedures: 1. Contact the Bose organization in your country/region (visit Global.Bose.com for Bose contact information in your country/region) for specific return and shipping instructions; 2. Label and ship the product, freight prepaid, to the address provided by the authorized service facility; and 3. Place any necessary return authorization number prominently on the outside of the carton. Cartons not bearing a return authorization number, where required, will be refused. The L1 Compact Portable Line Array System is covered by patents issued or pending in the U.S. and other countries.
Serial numbers and product registration Now is a good time to record the serial numbers of your system here and on your product registration card. L1 Compact Loudspeaker Array __________________________________________________ L1 Compact Power Stand________________________________________________________ L1 Compact Extensions _________________________________________________________ Bose recommends that you keep your sales receipt together with this guide.
Cajun_Care+Maint.fm Page 17 Tuesday, December 23, 2008 1:08 PM

Technical Information

Mechanical
L1 Compact Power Stand with Loudspeaker Array L1 Compact Loudspeaker Array L1 Compact Extensions (2) Collapsed position (assembled) Extended position (assembled)

Dimensions

16" H x 13" W x 16" D (41.8 cm x 33.9 cm x 42.6 cm) 16" H x 2" W x 2" D (40.8 cm x 7 cm x 7.1 cm) 32" H x 2" W x 2" D (83 cm x 7 cm x 7.1 cm) 16" H x 13" W x 16" D (41.8 cm x 33.9 cm x 42.6 cm) 78" H x 13" W x 16" D (199.5 cm x 33.9 cm x 42.6 cm)

Weight

24.6 lbs. (11.2 kg) 3.0 lbs. (1.35 kg) 2.3 lbs. (1.05 kg) each 24.6 lbs. (11.2 kg) 29.2 lbs. (13.3 kg)

Shipping Cartons

L1 Compact loudspeakers L1 Compact extensions

30.4 lbs. (13.8 kg) 7.5 lbs. (3.4 kg)

Electrical

AC power rating 100-240V 50/60Hz 200W max Peak inrush current 230V: 18.2 Amps 120V: 9.7 Amps
BOSE, L1, and TONEMATCH are registered trademarks of Bose Corporation in the U.S. and other countries.
Owners Guide Espaol Franais

L1 Compact

Key Features
portable line array system

TECHNICALDATASHEET

High-performing, self-powered, portable two-way loudspeaker system designed for the production and reproduction of live music, music playback, speeches and A/V sound reproduction. Spatial Dispersion loudspeaker technology produces wide, uniform sound coverage throughout the entire listening area even off to the extreme sides. Integrated ToneMatch presets contain hardwired equalization curves for dynamic handheld microphones and acoustic guitars. Offers both collapsed and extended setup positions. For smaller spaces with audiences of up to 100.

Description

The L1 Compact portable line array system is a powered loudspeaker system designed to provide wide, uniform sound coverage and easy setup. Spatial Dispersion loudspeaker technology combines proprietary Bose technologies to deliver clear, powerful sound throughout the entire listening area even off to the extreme sides. The interlocking components are easily transported and eliminate the need for external speaker wires and stands. The system offers a built-in, two-channel mixer with XLR, 18" (3.5 mm) TRS, stereo RCA, and " TRS phone jack compatibility. The L1 Compact system is well-suited for professional applications such as music playback, speeches and A/V sound reproduction.

Descriptive Data

System Specifications System Type Calculated Maximum SPL @ 1m (continuous and peak) Frequency Range (-3 dB) Frequency Range (-10 dB) Crossover Frequency Nominal Coverage Pattern Power System Power Handling Distortion at Rated Power System Limiter Transducers High-Frequency Drivers Low-Frequency Driver Channel 1 Microphone Only Input Signal Indicators ToneMatch Preset Self-powered, two-way 106 dB continuous, 112 dB peak 65 Hz 14 kHz 50 Hz 16 kHz 400 Hz 4th order Butterworth 180 H x 40 V 130 W 0.1% Max 30 Hz 15 kHz Dynamic Limiting (6) 2.00" HF drivers (1) 8" LF driver Signal/Clip LED: Green = Signal Present Red = Clip (limiter active) NOTE: The ToneMatch equalization is always engaged on Channel 1 and cannot be bypassed. The preset is designed to optimize a dynamic handheld microphone for the L1 Compact system.
Bose Professional Systems Division

pro.Bose.com

Descriptive Data (continued)
Channel 1 Microphone Only Input (continued) Controls Volume Treble: +/- 5 dB shelving filter @ 4 kHz Bass: +/- 5 dB shelving filter @ 120 Hz XLR Balanced Pin 1 (GND), Pin 2 (+), Pin 3 (-) -Infinity to +50 dB +8 dBu 2.4 k Signal/Clip LED: Green = Signal Present Red = Clip (limiter active) NOTE: This switch engages ToneMatch equalization only to the " input. When set to ON, this engages a preset designed for an acoustic guitar with a piezo pickup. When in the OFF position, no EQ is applied. Volume " TS/TRS 1 8" TS/TRS (2) RCA " = -Infinity to +40 dB 1 8" and RCA = -Infinity to +24 dB " = +12 dBu 8" = +12 dBu RCA = +12 dBu " = 800 k 1 8" = 14 k RCA = 12.5 k
Input Channel Gain Max Input Signal Input Impedance Channel 2 Line and Instrument Inputs Signal Indicators ToneMatch Switch

Controls Inputs

Channel Gain Max Input Signal Input Impedance
Outputs Line Output Record Out Physical Properties Grille Enclosure and Extensions Net Weight and Dimensions L1 Compact Collapsed Position L1 Compact Extended Position L1 Compact Extensions (2) Shipping Weight L1 Compact Power Stand L1 Compact Extensions Voltages Universal Power Supply
" balanced TRS or unbalanced TS Nominal +2.2 dBu Max +20 dBu (2) RCA unbalanced Nominal -3.8 dBu Max +14 dBu Powder-coated steel Enclosure: Polypropylene Extension + Array: ABS 24.6 lbs. (11.2 kg) 16.5" H x 13.25" W x 16.75" D (418 mm x 339 mm x 426 mm) 29.2 lbs. (13.3 kg) 78.5" H x 13.25" W x 16.75" D (1995 mm x 339 mm x 426 mm) 2.3 lbs. (1.05 kg) each 32.5" H x 2.75" W x 2.75" D (830 mm x 70 mm x 70 mm) 30.4 lbs. (13.8 kg) 7.5 lbs. (3.4 kg) AC power rating 100-240 V 50 / 60 Hz +/- 20% 200 W max

Mechanical Diagrams

Extended Position
16.8" (426 mm) 13.9" (354 mm)
Signal Flow Block Diagram
Channel 1 Microphone XLR Jack 1/8" Jack Channel 2 RCA Jacks 1/4" Jack
Pre Amp Tone Match Bass Adjust

2.8" (70 mm)

Buffer

Pre Amp

2.9" (72 mm)

Volume

Tone Match

Se lect

2.8" (72 mm)

Treble Adjust

Treble

15.2" (386 mm)

LED Drive Buffer

LED Drive

Bass EQ Bass Limiter Line Driver

31.0" (788 mm)

High EQ High Limiter Line Driver Connector
Ribbon Cable I/O Board to Amp Board

Line Out Buffer

1/4" Jack

RCA Jacks

78.5" (1995 mm)

Connector

+/-18V I/O Board +/-28V Amplifiers

Power Supply

32.2" (821 mm)

Bass Driver

Twiddler Array

16.5" (418 mm)

13.3" (339 mm)

Collapsed Position

14.0" (357 mm)
Polar Plots Octave Horizontal

125 Hz Octave Band

330 30

250 Hz Octave Band

500 Hz Octave Band

-30 -24 -18 -12 -6

150 180

100 Hz 125 Hz 160 Hz

200 Hz 250 Hz 315 Hz

400 Hz 500 Hz 630 Hz

1000 Hz Octave Band

2000 Hz Octave Band

4000 Hz Octave Band

800 Hz 1000 Hz 1250 Hz

1600 Hz 2000 Hz 2500 Hz

3150 Hz 4000 Hz 5000 Hz

8000 Hz Octave Band

16000 Hz Octave Band

6300 Hz 8000 Hz 10000 Hz

12500 Hz 16000 Hz

Polar Plots Octave Vertical

60 120

240 270

Beamwidth

Angle (degrees)
Horizontal Vertical 20000

Frequency (Hz)

Directivity Index and Q

100 1000

Directivity Index (dB)
Engineers and Architects Specifications
The system shall be a multiple driver, full-range portable loudspeaker system with internally supplied power amplification and active equalization for multiple operating modes as follows: The transducer complement shall consist of six 2.00" (51 mm) high-excursion drivers mounted in a curved Articulated Array loudspeaker coupled with an integral 8" (203 mm) low-frequency driver mounted in a ported bass enclosure. The loudspeaker array shall be wired in a series/parallel configuration. The nominal horizontal beamwidth of the loudspeaker shall be 180 and the vertical , coverage shall be 40. The systems power stand shall incorporate a ported venting system for the low-frequency driver, tuned for 65 Hz. The power amplification for transducers shall be supplied by the integrated power stand providing 130 W continuous pink noise, band-limited from 65 Hz to 14 kHz (-3 dB). The input connectors of the power stand module shall consist of one XLR with equalization for a dynamic handheld microphone, one " TRS with selectable ToneMatch signal processing for acoustic guitar with piezo pickup, stereo RCA, and one 1 8" TRS receptacle. The output connectors of the power stand shall consist of one " balanced TRS or unbalanced TS and two RCA unbalanced phone plugs. The enclosure of the power stand shall be constructed of polypropylene materials. The extension and array shall be constructed of ABS materials. In collapsed tabletop mode, the systems outer dimensions shall be 16.5" H x 13.25" W x 16.75" D (418 mm x 339 mm x 426 mm). Its weight shall be 24.6 lbs. (11.2 kg). In extended operating mode, the systems outer dimensions shall be 78.5" H x 13.25" W x 16.75" D (1995 mm x 339 mm x 426 mm). Its weight shall be 29.2 lbs. (13.3 kg). The system shall be capable of two operating modes; collapsed tabletop or extended position by integrating height-extension modules. The loudspeaker shall be the Bose L1 Compact portable line array system.

Safety and Regulatory Compliance
The L1 Compact system complies with the following standards: UL/IEC/EN 60065 7th Edition Safety Standard for Audio and Video Equipment Ecodesign Directive 2005/32/EC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. This product complies with the Canadian ICES-003 Class A specifications. This product conforms to the EMC Directive 2004/108/EC Under standards: EN551031 & 2: 1997, Environment 2.
How our Loudspeakers are Measured

Calculated Max SPL

Calculated based on input sensitivity and maximum input power rating exclusive of power compression.

More Information

Technical literature and other materials are available at pro.Bose.com.

Product Codes

System
L1 Compact Portable Line Array System 100 V. PC 52293 L1 Compact Portable Line Array System 120 V. PC 52290 L1 Compact Portable Line Array System 230 V. PC 52291 L1 Compact Portable Line Array System 240 V. PC 52292

Available Accessories

L1 Compact Microphone Accessory Kit . PC 322711-0000 L1 Compact Extensions Carry Bag. PC 317404-010S L1 Compact Power Stand Slip Cover. PC 317403-010S T1 ToneMatch Audio Engine. PC 042826 T1 ToneMatch Audio Engine Power Supply . PC 042533 T1 ToneMatch Audio Engine Mic Stand Bracket. PC 042535

Replacement Part Numbers

Loudspeaker Array. PC 318880-010S Power cord, 120 V (US) . PC 298165 Power cord, 220 V (China). PC 318882-210S Power cord, 100 V (Japan). PC 298167 Power cord, 230 V (Euro). PC 298166 Power cord, 240 V (UK). PC 298168 Knob, Channels 1 and 2. PC 317349-010S Knob, Volume/Treble . PC 317350-010S Knob, Line Level. PC 317351-010S Grille, Array (w/logo). PC 317365-010S Array Logo. PC 317407-010S
All information subject to change without notice. 2009 Bose Corporation. Bose, L1, ToneMatch, Articulated Array and Spatial Dispersion are trademarks of Bose Corporation in the U.S. and other countries. C_008054